C++ (Cpp) soc_configure_pads Beispiele

Beispiel #1

Datei: romstage.c Projekt: tidatida/coreboot

void romstage_mainboard_init(void)
{
	/* Bring up controller interfaces for ramstage loading. */
	soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs));
	soc_configure_funits(funitcfgs, ARRAY_SIZE(funitcfgs));

	/* TPM I2C bus */
	i2c_init(2);
}

Beispiel #2

Datei: bootblock.c Projekt: AdriDlu/coreboot

void bootblock_mainboard_init(void)
{
	set_clock_sources();

	/* Set up controllers and pads to load romstage. */
	soc_configure_funits(funits, ARRAY_SIZE(funits));
	soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs));

	i2c_init(I2CPWR_BUS);
	pmic_init(I2CPWR_BUS);
}

Beispiel #3

Datei: mainboard.c Projekt: tidatida/coreboot

static void mainboard_init(device_t dev)
{
	soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs));
	soc_configure_funits(funitcfgs, ARRAY_SIZE(funitcfgs));

	setup_ec_spi();
	setup_usb();

	setup_audio();
	i2c_init(I2C1_BUS);		/* for max98090 codec */
}

Beispiel #4

Datei: bootblock.c Projekt: zamaudio/coreboot

void bootblock_mainboard_init(void)
{
	set_clock_sources();

	/* Set up the pads required to load romstage. */
	soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs));
	soc_configure_funits(funitcfgs, ARRAY_SIZE(funitcfgs));

	i2c_init(4);
	pmic_init(4);

	tegra_spi_init(4);
}

Beispiel #5

Datei: mainboard.c Projekt: bitpick/coreboot

static int configure_display_blocks(void)
{
	/* enable display related clocks */
	configure_display_clocks();

	/* configure panel gpio pads */
	soc_configure_pads(lcd_gpio_padcfgs, ARRAY_SIZE(lcd_gpio_padcfgs));

	/* set and enable panel related vdd */
	if (enable_lcd_vdd())
		return -1;

	return 0;
}

Beispiel #6

Datei: mainboard.c Projekt: bitpick/coreboot

static void mainboard_init(device_t dev)
{
	soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs));
	soc_configure_funits(funits, ARRAY_SIZE(funits));

	/* I2C6 bus (audio, etc.) */
	soc_configure_i2c6pad();
	i2c_init(I2C6_BUS);
	setup_audio();

	/* if panel needs to bringup */
#if IS_ENABLED(CONFIG_CHROMEOS)
	if (!vboot_skip_display_init())
#endif
		configure_display_blocks();

	powergate_unused_partitions();
}

Beispiel #7

Datei: mainboard.c Projekt: tidatida/coreboot

static void mainboard_init(device_t dev)
{
	soc_configure_funits(funits, ARRAY_SIZE(funits));

	/* I2C6 bus (audio, etc.) */
	soc_configure_i2c6pad();
	i2c_init(I2C6_BUS);

	setup_audio();
	/* Temp hack for P1 board: Enable speaker amp (powerup, etc.) */
	enable_ad4567_spkr_amp();

	elog_init();
	elog_add_boot_reason();

	fix_ec_sw_sync();

	/* configure panel gpio pads */
	soc_configure_pads(lcd_gpio_padcfgs, ARRAY_SIZE(lcd_gpio_padcfgs));

	/* if panel needs to bringup */
	if (!vboot_skip_display_init())
		configure_display_blocks();
}

Beispiel #8

Datei: bootblock.c Projekt: AdriDlu/coreboot

void bootblock_mainboard_early_init(void)
{
	soc_configure_pads(uart_console_pads, ARRAY_SIZE(uart_console_pads));
}