calibrate_return mag_calibrate_all(int mavlink_fd, int32_t (&device_ids)[max_mags])
{
calibrate_return result = calibrate_return_ok;
mag_worker_data_t worker_data;
worker_data.mavlink_fd = mavlink_fd;
worker_data.done_count = 0;
worker_data.calibration_points_perside = 40;
worker_data.calibration_interval_perside_seconds = 20;
worker_data.calibration_interval_perside_useconds = worker_data.calibration_interval_perside_seconds * 1000 * 1000;
// Collect: Right-side up, Left Side, Nose down
worker_data.side_data_collected[DETECT_ORIENTATION_RIGHTSIDE_UP] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_LEFT] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_NOSE_DOWN] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_TAIL_DOWN] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_UPSIDE_DOWN] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_RIGHT] = false;
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
// Initialize to no subscription
worker_data.sub_mag[cur_mag] = -1;
// Initialize to no memory allocated
worker_data.x[cur_mag] = NULL;
worker_data.y[cur_mag] = NULL;
worker_data.z[cur_mag] = NULL;
worker_data.calibration_counter_total[cur_mag] = 0;
}
const unsigned int calibration_points_maxcount = calibration_sides * worker_data.calibration_points_perside;
char str[30];
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
worker_data.x[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
worker_data.y[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
worker_data.z[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
if (worker_data.x[cur_mag] == NULL || worker_data.y[cur_mag] == NULL || worker_data.z[cur_mag] == NULL) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: out of memory");
result = calibrate_return_error;
}
}
// Setup subscriptions to mag sensors
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
// Mag in this slot is available
worker_data.sub_mag[cur_mag] = orb_subscribe_multi(ORB_ID(sensor_mag), cur_mag);
if (worker_data.sub_mag[cur_mag] < 0) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] Mag #%u not found, abort", cur_mag);
result = calibrate_return_error;
break;
}
}
}
}
// Limit update rate to get equally spaced measurements over time (in ms)
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
// Mag in this slot is available
unsigned int orb_interval_msecs = (worker_data.calibration_interval_perside_useconds / 1000) / worker_data.calibration_points_perside;
//mavlink_and_console_log_info(mavlink_fd, "Orb interval %u msecs", orb_interval_msecs);
orb_set_interval(worker_data.sub_mag[cur_mag], orb_interval_msecs);
}
}
}
if (result == calibrate_return_ok) {
int cancel_sub = calibrate_cancel_subscribe();
result = calibrate_from_orientation(mavlink_fd, // Mavlink fd to write output
cancel_sub, // Subscription to vehicle_command for cancel support
worker_data.side_data_collected, // Sides to calibrate
mag_calibration_worker, // Calibration worker
&worker_data, // Opaque data for calibration worked
true); // true: lenient still detection
calibrate_cancel_unsubscribe(cancel_sub);
}
// Close subscriptions
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (worker_data.sub_mag[cur_mag] >= 0) {
px4_close(worker_data.sub_mag[cur_mag]);
}
}
// Calculate calibration values for each mag
float sphere_x[max_mags];
float sphere_y[max_mags];
float sphere_z[max_mags];
float sphere_radius[max_mags];
// Sphere fit the data to get calibration values
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
// Mag in this slot is available and we should have values for it to calibrate
sphere_fit_least_squares(worker_data.x[cur_mag], worker_data.y[cur_mag], worker_data.z[cur_mag],
worker_data.calibration_counter_total[cur_mag],
100, 0.0f,
&sphere_x[cur_mag], &sphere_y[cur_mag], &sphere_z[cur_mag],
&sphere_radius[cur_mag]);
if (!PX4_ISFINITE(sphere_x[cur_mag]) || !PX4_ISFINITE(sphere_y[cur_mag]) || !PX4_ISFINITE(sphere_z[cur_mag])) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: NaN in sphere fit for mag #%u", cur_mag);
result = calibrate_return_error;
}
}
}
}
// Print uncalibrated data points
if (result == calibrate_return_ok) {
printf("RAW DATA:\n--------------------\n");
for (size_t cur_mag = 0; cur_mag < max_mags; cur_mag++) {
printf("RAW: MAG %u with %u samples:\n", (unsigned)cur_mag, (unsigned)worker_data.calibration_counter_total[cur_mag]);
for (size_t i = 0; i < worker_data.calibration_counter_total[cur_mag]; i++) {
float x = worker_data.x[cur_mag][i];
float y = worker_data.y[cur_mag][i];
float z = worker_data.z[cur_mag][i];
printf("%8.4f, %8.4f, %8.4f\n", (double)x, (double)y, (double)z);
}
printf(">>>>>>>\n");
}
printf("CALIBRATED DATA:\n--------------------\n");
for (size_t cur_mag = 0; cur_mag < max_mags; cur_mag++) {
printf("Calibrated: MAG %u with %u samples:\n", (unsigned)cur_mag, (unsigned)worker_data.calibration_counter_total[cur_mag]);
for (size_t i = 0; i < worker_data.calibration_counter_total[cur_mag]; i++) {
float x = worker_data.x[cur_mag][i] - sphere_x[cur_mag];
float y = worker_data.y[cur_mag][i] - sphere_y[cur_mag];
float z = worker_data.z[cur_mag][i] - sphere_z[cur_mag];
printf("%8.4f, %8.4f, %8.4f\n", (double)x, (double)y, (double)z);
}
printf("SPHERE RADIUS: %8.4f\n", (double)sphere_radius[cur_mag]);
printf(">>>>>>>\n");
}
}
// Data points are no longer needed
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
free(worker_data.x[cur_mag]);
free(worker_data.y[cur_mag]);
free(worker_data.z[cur_mag]);
}
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
int fd_mag = -1;
struct mag_scale mscale;
// Set new scale
(void)sprintf(str, "%s%u", MAG_BASE_DEVICE_PATH, cur_mag);
fd_mag = px4_open(str, 0);
if (fd_mag < 0) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: unable to open mag device #%u", cur_mag);
result = calibrate_return_error;
}
if (result == calibrate_return_ok) {
if (px4_ioctl(fd_mag, MAGIOCGSCALE, (long unsigned int)&mscale) != OK) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: failed to get current calibration #%u", cur_mag);
result = calibrate_return_error;
}
}
if (result == calibrate_return_ok) {
mscale.x_offset = sphere_x[cur_mag];
mscale.y_offset = sphere_y[cur_mag];
mscale.z_offset = sphere_z[cur_mag];
if (px4_ioctl(fd_mag, MAGIOCSSCALE, (long unsigned int)&mscale) != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_ERROR_APPLY_CAL_MSG, cur_mag);
result = calibrate_return_error;
}
}
// Mag device no longer needed
if (fd_mag >= 0) {
px4_close(fd_mag);
}
if (result == calibrate_return_ok) {
bool failed = false;
/* set parameters */
(void)sprintf(str, "CAL_MAG%u_ID", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(device_ids[cur_mag])));
(void)sprintf(str, "CAL_MAG%u_XOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.x_offset)));
(void)sprintf(str, "CAL_MAG%u_YOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.y_offset)));
(void)sprintf(str, "CAL_MAG%u_ZOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.z_offset)));
(void)sprintf(str, "CAL_MAG%u_XSCALE", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.x_scale)));
(void)sprintf(str, "CAL_MAG%u_YSCALE", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.y_scale)));
(void)sprintf(str, "CAL_MAG%u_ZSCALE", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.z_scale)));
if (failed) {
mavlink_and_console_log_critical(mavlink_fd, CAL_ERROR_SET_PARAMS_MSG, cur_mag);
result = calibrate_return_error;
} else {
mavlink_and_console_log_info(mavlink_fd, "[cal] mag #%u off: x:%.2f y:%.2f z:%.2f Ga",
cur_mag,
(double)mscale.x_offset, (double)mscale.y_offset, (double)mscale.z_offset);
mavlink_and_console_log_info(mavlink_fd, "[cal] mag #%u scale: x:%.2f y:%.2f z:%.2f",
cur_mag,
(double)mscale.x_scale, (double)mscale.y_scale, (double)mscale.z_scale);
}
}
}
}
}
return result;
}
int calibrate_instance(int mavlink_fd, unsigned s, unsigned device_id)
{
/* 45 seconds */
uint64_t calibration_interval = 25 * 1000 * 1000;
/* maximum 500 values */
const unsigned int calibration_maxcount = 240;
unsigned int calibration_counter;
float *x = NULL;
float *y = NULL;
float *z = NULL;
char str[30];
int res = OK;
/* allocate memory */
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20);
x = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
y = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
z = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
if (x == NULL || y == NULL || z == NULL) {
mavlink_and_console_log_critical(mavlink_fd, "ERROR: out of memory");
/* clean up */
if (x != NULL) {
free(x);
}
if (y != NULL) {
free(y);
}
if (z != NULL) {
free(z);
}
res = ERROR;
return res;
}
if (res == OK) {
int sub_mag = orb_subscribe_multi(ORB_ID(sensor_mag), s);
if (sub_mag < 0) {
mavlink_and_console_log_critical(mavlink_fd, "No mag found, abort");
res = ERROR;
} else {
struct mag_report mag;
/* limit update rate to get equally spaced measurements over time (in ms) */
orb_set_interval(sub_mag, (calibration_interval / 1000) / calibration_maxcount);
/* calibrate offsets */
uint64_t calibration_deadline = hrt_absolute_time() + calibration_interval;
unsigned poll_errcount = 0;
mavlink_and_console_log_info(mavlink_fd, "Turn on all sides: front/back,left/right,up/down");
calibration_counter = 0U;
while (hrt_absolute_time() < calibration_deadline &&
calibration_counter < calibration_maxcount) {
/* wait blocking for new data */
struct pollfd fds[1];
fds[0].fd = sub_mag;
fds[0].events = POLLIN;
int poll_ret = poll(fds, 1, 1000);
if (poll_ret > 0) {
orb_copy(ORB_ID(sensor_mag), sub_mag, &mag);
x[calibration_counter] = mag.x;
y[calibration_counter] = mag.y;
z[calibration_counter] = mag.z;
calibration_counter++;
if (calibration_counter % (calibration_maxcount / 20) == 0) {
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20 + (calibration_counter * 50) / calibration_maxcount);
}
} else {
poll_errcount++;
}
if (poll_errcount > 1000) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SENSOR_MSG);
res = ERROR;
break;
}
}
close(sub_mag);
}
}
float sphere_x;
float sphere_y;
float sphere_z;
float sphere_radius;
if (res == OK && calibration_counter > (calibration_maxcount / 2)) {
/* sphere fit */
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 70);
sphere_fit_least_squares(x, y, z, calibration_counter, 100, 0.0f, &sphere_x, &sphere_y, &sphere_z, &sphere_radius);
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 80);
if (!isfinite(sphere_x) || !isfinite(sphere_y) || !isfinite(sphere_z)) {
mavlink_and_console_log_critical(mavlink_fd, "ERROR: NaN in sphere fit");
res = ERROR;
}
}
if (x != NULL) {
free(x);
}
if (y != NULL) {
free(y);
}
if (z != NULL) {
free(z);
}
if (res == OK) {
/* apply calibration and set parameters */
struct mag_scale mscale;
(void)sprintf(str, "%s%u", MAG_BASE_DEVICE_PATH, s);
int fd = open(str, 0);
res = ioctl(fd, MAGIOCGSCALE, (long unsigned int)&mscale);
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, "ERROR: failed to get current calibration");
}
if (res == OK) {
mscale.x_offset = sphere_x;
mscale.y_offset = sphere_y;
mscale.z_offset = sphere_z;
res = ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale);
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_APPLY_CAL_MSG);
}
}
close(fd);
if (res == OK) {
bool failed = false;
/* set parameters */
(void)sprintf(str, "CAL_MAG%u_ID", s);
failed |= (OK != param_set(param_find(str), &(device_id)));
(void)sprintf(str, "CAL_MAG%u_XOFF", s);
failed |= (OK != param_set(param_find(str), &(mscale.x_offset)));
(void)sprintf(str, "CAL_MAG%u_YOFF", s);
failed |= (OK != param_set(param_find(str), &(mscale.y_offset)));
(void)sprintf(str, "CAL_MAG%u_ZOFF", s);
failed |= (OK != param_set(param_find(str), &(mscale.z_offset)));
(void)sprintf(str, "CAL_MAG%u_XSCALE", s);
failed |= (OK != param_set(param_find(str), &(mscale.x_scale)));
(void)sprintf(str, "CAL_MAG%u_YSCALE", s);
failed |= (OK != param_set(param_find(str), &(mscale.y_scale)));
(void)sprintf(str, "CAL_MAG%u_ZSCALE", s);
failed |= (OK != param_set(param_find(str), &(mscale.z_scale)));
if (failed) {
res = ERROR;
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SET_PARAMS_MSG);
}
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 90);
}
mavlink_and_console_log_info(mavlink_fd, "mag off: x:%.2f y:%.2f z:%.2f Ga", (double)mscale.x_offset,
(double)mscale.y_offset, (double)mscale.z_offset);
mavlink_and_console_log_info(mavlink_fd, "mag scale: x:%.2f y:%.2f z:%.2f", (double)mscale.x_scale,
(double)mscale.y_scale, (double)mscale.z_scale);
}
return res;
}
calibrate_return mag_calibrate_all(orb_advert_t *mavlink_log_pub)
{
calibrate_return result = calibrate_return_ok;
mag_worker_data_t worker_data;
worker_data.mavlink_log_pub = mavlink_log_pub;
worker_data.done_count = 0;
worker_data.calibration_points_perside = calibration_total_points / calibration_sides;
worker_data.calibration_interval_perside_seconds = calibraton_duration_seconds / calibration_sides;
worker_data.calibration_interval_perside_useconds = worker_data.calibration_interval_perside_seconds * 1000 * 1000;
// Collect: Right-side up, Left Side, Nose down
worker_data.side_data_collected[DETECT_ORIENTATION_RIGHTSIDE_UP] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_LEFT] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_NOSE_DOWN] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_TAIL_DOWN] = true;
worker_data.side_data_collected[DETECT_ORIENTATION_UPSIDE_DOWN] = true;
worker_data.side_data_collected[DETECT_ORIENTATION_RIGHT] = true;
calibration_log_info(mavlink_log_pub,
"[cal] %s side done, rotate to a different side",
detect_orientation_str(DETECT_ORIENTATION_TAIL_DOWN));
usleep(100000);
calibration_log_info(mavlink_log_pub,
"[cal] %s side done, rotate to a different side",
detect_orientation_str(DETECT_ORIENTATION_TAIL_DOWN));
usleep(100000);
calibration_log_info(mavlink_log_pub,
"[cal] %s side done, rotate to a different side",
detect_orientation_str(DETECT_ORIENTATION_UPSIDE_DOWN));
usleep(100000);
calibration_log_info(mavlink_log_pub,
"[cal] %s side done, rotate to a different side",
detect_orientation_str(DETECT_ORIENTATION_UPSIDE_DOWN));
usleep(100000);
calibration_log_info(mavlink_log_pub,
"[cal] %s side done, rotate to a different side",
detect_orientation_str(DETECT_ORIENTATION_RIGHT));
usleep(100000);
calibration_log_info(mavlink_log_pub,
"[cal] %s side done, rotate to a different side",
detect_orientation_str(DETECT_ORIENTATION_RIGHT));
usleep(100000);
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
// Initialize to no subscription
worker_data.sub_mag[cur_mag] = -1;
// Initialize to no memory allocated
worker_data.x[cur_mag] = NULL;
worker_data.y[cur_mag] = NULL;
worker_data.z[cur_mag] = NULL;
worker_data.calibration_counter_total[cur_mag] = 0;
}
const unsigned int calibration_points_maxcount = calibration_sides * worker_data.calibration_points_perside;
char str[30];
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
worker_data.x[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
worker_data.y[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
worker_data.z[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
if (worker_data.x[cur_mag] == NULL || worker_data.y[cur_mag] == NULL || worker_data.z[cur_mag] == NULL) {
calibration_log_critical(mavlink_log_pub, "[cal] ERROR: out of memory");
result = calibrate_return_error;
}
}
// Setup subscriptions to mag sensors
if (result == calibrate_return_ok) {
// We should not try to subscribe if the topic doesn't actually exist and can be counted.
const unsigned mag_count = orb_group_count(ORB_ID(sensor_mag));
for (unsigned cur_mag = 0; cur_mag < mag_count; cur_mag++) {
// Mag in this slot is available
worker_data.sub_mag[cur_mag] = orb_subscribe_multi(ORB_ID(sensor_mag), cur_mag);
#ifdef __PX4_QURT
// For QURT respectively the driver framework, we need to get the device ID by copying one report.
struct mag_report mag_report;
orb_copy(ORB_ID(sensor_mag), worker_data.sub_mag[cur_mag], &mag_report);
device_ids[cur_mag] = mag_report.device_id;
#endif
if (worker_data.sub_mag[cur_mag] < 0) {
calibration_log_critical(mavlink_log_pub, "[cal] Mag #%u not found, abort", cur_mag);
result = calibrate_return_error;
break;
}
if (device_ids[cur_mag] != 0) {
// Get priority
int32_t prio;
orb_priority(worker_data.sub_mag[cur_mag], &prio);
if (prio > device_prio_max) {
device_prio_max = prio;
device_id_primary = device_ids[cur_mag];
}
} else {
calibration_log_critical(mavlink_log_pub, "[cal] Mag #%u no device id, abort", cur_mag);
result = calibrate_return_error;
break;
}
}
}
// Limit update rate to get equally spaced measurements over time (in ms)
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
// Mag in this slot is available
unsigned int orb_interval_msecs = (worker_data.calibration_interval_perside_useconds / 1000) / worker_data.calibration_points_perside;
//calibration_log_info(mavlink_log_pub, "Orb interval %u msecs", orb_interval_msecs);
orb_set_interval(worker_data.sub_mag[cur_mag], orb_interval_msecs);
}
}
}
if (result == calibrate_return_ok) {
int cancel_sub = calibrate_cancel_subscribe();
result = calibrate_from_orientation(mavlink_log_pub, // uORB handle to write output
cancel_sub, // Subscription to vehicle_command for cancel support
worker_data.side_data_collected, // Sides to calibrate
mag_calibration_worker, // Calibration worker
&worker_data, // Opaque data for calibration worked
true); // true: lenient still detection
calibrate_cancel_unsubscribe(cancel_sub);
}
// Close subscriptions
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (worker_data.sub_mag[cur_mag] >= 0) {
px4_close(worker_data.sub_mag[cur_mag]);
}
}
// Calculate calibration values for each mag
float sphere_x[max_mags];
float sphere_y[max_mags];
float sphere_z[max_mags];
float sphere_radius[max_mags];
// Sphere fit the data to get calibration values
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
// Mag in this slot is available and we should have values for it to calibrate
sphere_fit_least_squares(worker_data.x[cur_mag], worker_data.y[cur_mag], worker_data.z[cur_mag],
worker_data.calibration_counter_total[cur_mag],
100, 0.0f,
&sphere_x[cur_mag], &sphere_y[cur_mag], &sphere_z[cur_mag],
&sphere_radius[cur_mag]);
if (!PX4_ISFINITE(sphere_x[cur_mag]) || !PX4_ISFINITE(sphere_y[cur_mag]) || !PX4_ISFINITE(sphere_z[cur_mag])) {
calibration_log_emergency(mavlink_log_pub, "ERROR: Retry calibration (sphere NaN, #%u)", cur_mag);
result = calibrate_return_error;
}
if (fabsf(sphere_x[cur_mag]) > MAG_MAX_OFFSET_LEN ||
fabsf(sphere_y[cur_mag]) > MAG_MAX_OFFSET_LEN ||
fabsf(sphere_z[cur_mag]) > MAG_MAX_OFFSET_LEN) {
calibration_log_emergency(mavlink_log_pub, "ERROR: Replace %s mag fault", (internal[cur_mag]) ? "autopilot, internal" : "GPS unit, external");
calibration_log_info(mavlink_log_pub, "Excessive offsets: %8.4f, %8.4f, %8.4f, #%u", (double)sphere_x[cur_mag],
(double)sphere_y[cur_mag], (double)sphere_z[cur_mag], cur_mag);
result = calibrate_return_ok;
}
}
}
}
// Print uncalibrated data points
if (result == calibrate_return_ok) {
// DO NOT REMOVE! Critical validation data!
// printf("RAW DATA:\n--------------------\n");
// for (size_t cur_mag = 0; cur_mag < max_mags; cur_mag++) {
// if (worker_data.calibration_counter_total[cur_mag] == 0) {
// continue;
// }
// printf("RAW: MAG %u with %u samples:\n", (unsigned)cur_mag, (unsigned)worker_data.calibration_counter_total[cur_mag]);
// for (size_t i = 0; i < worker_data.calibration_counter_total[cur_mag]; i++) {
// float x = worker_data.x[cur_mag][i];
// float y = worker_data.y[cur_mag][i];
// float z = worker_data.z[cur_mag][i];
// printf("%8.4f, %8.4f, %8.4f\n", (double)x, (double)y, (double)z);
// }
// printf(">>>>>>>\n");
// }
// printf("CALIBRATED DATA:\n--------------------\n");
// for (size_t cur_mag = 0; cur_mag < max_mags; cur_mag++) {
// if (worker_data.calibration_counter_total[cur_mag] == 0) {
// continue;
// }
// printf("Calibrated: MAG %u with %u samples:\n", (unsigned)cur_mag, (unsigned)worker_data.calibration_counter_total[cur_mag]);
// for (size_t i = 0; i < worker_data.calibration_counter_total[cur_mag]; i++) {
// float x = worker_data.x[cur_mag][i] - sphere_x[cur_mag];
// float y = worker_data.y[cur_mag][i] - sphere_y[cur_mag];
// float z = worker_data.z[cur_mag][i] - sphere_z[cur_mag];
// printf("%8.4f, %8.4f, %8.4f\n", (double)x, (double)y, (double)z);
// }
// printf("SPHERE RADIUS: %8.4f\n", (double)sphere_radius[cur_mag]);
// printf(">>>>>>>\n");
// }
}
// Data points are no longer needed
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
free(worker_data.x[cur_mag]);
free(worker_data.y[cur_mag]);
free(worker_data.z[cur_mag]);
}
if (result == calibrate_return_ok) {
(void)param_set_no_notification(param_find("CAL_MAG_PRIME"), &(device_id_primary));
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
struct mag_calibration_s mscale;
#ifndef __PX4_QURT
int fd_mag = -1;
// Set new scale
(void)sprintf(str, "%s%u", MAG_BASE_DEVICE_PATH, cur_mag);
fd_mag = px4_open(str, 0);
if (fd_mag < 0) {
calibration_log_critical(mavlink_log_pub, "[cal] ERROR: unable to open mag device #%u", cur_mag);
result = calibrate_return_error;
}
if (result == calibrate_return_ok) {
if (px4_ioctl(fd_mag, MAGIOCGSCALE, (long unsigned int)&mscale) != OK) {
calibration_log_critical(mavlink_log_pub, "[cal] ERROR: failed to get current calibration #%u", cur_mag);
result = calibrate_return_error;
}
}
#endif
if (result == calibrate_return_ok) {
mscale.x_offset = sphere_x[cur_mag];
mscale.y_offset = sphere_y[cur_mag];
mscale.z_offset = sphere_z[cur_mag];
#ifndef __PX4_QURT
if (px4_ioctl(fd_mag, MAGIOCSSCALE, (long unsigned int)&mscale) != OK) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_APPLY_CAL_MSG, cur_mag);
result = calibrate_return_error;
}
#endif
}
#ifndef __PX4_QURT
// Mag device no longer needed
if (fd_mag >= 0) {
px4_close(fd_mag);
}
#endif
if (result == calibrate_return_ok) {
bool failed = false;
/* set parameters */
(void)sprintf(str, "CAL_MAG%u_ID", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(device_ids[cur_mag])));
(void)sprintf(str, "CAL_MAG%u_XOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.x_offset)));
(void)sprintf(str, "CAL_MAG%u_YOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.y_offset)));
(void)sprintf(str, "CAL_MAG%u_ZOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.z_offset)));
(void)sprintf(str, "CAL_MAG%u_XSCALE", cur_mag);
// FIXME: scaling is not used right now on QURT
#ifndef __PX4_QURT
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.x_scale)));
(void)sprintf(str, "CAL_MAG%u_YSCALE", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.y_scale)));
(void)sprintf(str, "CAL_MAG%u_ZSCALE", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.z_scale)));
#endif
if (failed) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_SET_PARAMS_MSG, cur_mag);
result = calibrate_return_error;
} else {
calibration_log_info(mavlink_log_pub, "[cal] mag #%u off: x:%.2f y:%.2f z:%.2f Ga",
cur_mag,
(double)mscale.x_offset, (double)mscale.y_offset, (double)mscale.z_offset);
#ifndef __PX4_QURT
calibration_log_info(mavlink_log_pub, "[cal] mag #%u scale: x:%.2f y:%.2f z:%.2f",
cur_mag,
(double)mscale.x_scale, (double)mscale.y_scale, (double)mscale.z_scale);
#endif
usleep(200000);
}
}
}
}
}
return result;
}
int do_mag_calibration(int mavlink_fd)
{
mavlink_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name);
mavlink_log_info(mavlink_fd, "don't move system");
/* 45 seconds */
uint64_t calibration_interval = 45 * 1000 * 1000;
/* maximum 500 values */
const unsigned int calibration_maxcount = 500;
unsigned int calibration_counter;
struct mag_scale mscale_null = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
int res = OK;
/* erase old calibration */
int fd = open(MAG_DEVICE_PATH, O_RDONLY);
res = ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale_null);
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_RESET_CAL_MSG);
}
if (res == OK) {
/* calibrate range */
res = ioctl(fd, MAGIOCCALIBRATE, fd);
if (res != OK) {
mavlink_log_critical(mavlink_fd, "Skipped scale calibration");
/* this is non-fatal - mark it accordingly */
res = OK;
}
}
close(fd);
float *x = NULL;
float *y = NULL;
float *z = NULL;
if (res == OK) {
/* allocate memory */
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20);
x = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
y = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
z = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
if (x == NULL || y == NULL || z == NULL) {
mavlink_log_critical(mavlink_fd, "ERROR: out of memory");
res = ERROR;
return res;
}
} else {
/* exit */
return ERROR;
}
if (res == OK) {
int sub_mag = orb_subscribe(ORB_ID(sensor_mag));
struct mag_report mag;
/* limit update rate to get equally spaced measurements over time (in ms) */
orb_set_interval(sub_mag, (calibration_interval / 1000) / calibration_maxcount);
/* calibrate offsets */
uint64_t calibration_deadline = hrt_absolute_time() + calibration_interval;
unsigned poll_errcount = 0;
mavlink_log_info(mavlink_fd, "rotate in a figure 8 around all axis");
calibration_counter = 0;
while (hrt_absolute_time() < calibration_deadline &&
calibration_counter < calibration_maxcount) {
/* wait blocking for new data */
struct pollfd fds[1];
fds[0].fd = sub_mag;
fds[0].events = POLLIN;
int poll_ret = poll(fds, 1, 1000);
if (poll_ret > 0) {
orb_copy(ORB_ID(sensor_mag), sub_mag, &mag);
x[calibration_counter] = mag.x;
y[calibration_counter] = mag.y;
z[calibration_counter] = mag.z;
calibration_counter++;
if (calibration_counter % (calibration_maxcount / 20) == 0)
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20 + (calibration_counter * 50) / calibration_maxcount);
} else {
poll_errcount++;
}
if (poll_errcount > 1000) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_SENSOR_MSG);
res = ERROR;
break;
}
}
close(sub_mag);
}
float sphere_x;
float sphere_y;
float sphere_z;
float sphere_radius;
if (res == OK) {
/* sphere fit */
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 70);
sphere_fit_least_squares(x, y, z, calibration_counter, 100, 0.0f, &sphere_x, &sphere_y, &sphere_z, &sphere_radius);
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 80);
if (!isfinite(sphere_x) || !isfinite(sphere_y) || !isfinite(sphere_z)) {
mavlink_log_critical(mavlink_fd, "ERROR: NaN in sphere fit");
res = ERROR;
}
}
if (x != NULL)
free(x);
if (y != NULL)
free(y);
if (z != NULL)
free(z);
if (res == OK) {
/* apply calibration and set parameters */
struct mag_scale mscale;
fd = open(MAG_DEVICE_PATH, 0);
res = ioctl(fd, MAGIOCGSCALE, (long unsigned int)&mscale);
if (res != OK) {
mavlink_log_critical(mavlink_fd, "ERROR: failed to get current calibration");
}
if (res == OK) {
mscale.x_offset = sphere_x;
mscale.y_offset = sphere_y;
mscale.z_offset = sphere_z;
res = ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale);
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_APPLY_CAL_MSG);
}
}
close(fd);
if (res == OK) {
/* set parameters */
if (param_set(param_find("SENS_MAG_XOFF"), &(mscale.x_offset)))
res = ERROR;
if (param_set(param_find("SENS_MAG_YOFF"), &(mscale.y_offset)))
res = ERROR;
if (param_set(param_find("SENS_MAG_ZOFF"), &(mscale.z_offset)))
res = ERROR;
if (param_set(param_find("SENS_MAG_XSCALE"), &(mscale.x_scale)))
res = ERROR;
if (param_set(param_find("SENS_MAG_YSCALE"), &(mscale.y_scale)))
res = ERROR;
if (param_set(param_find("SENS_MAG_ZSCALE"), &(mscale.z_scale)))
res = ERROR;
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_SET_PARAMS_MSG);
}
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 90);
}
if (res == OK) {
/* auto-save to EEPROM */
res = param_save_default();
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_SAVE_PARAMS_MSG);
}
}
mavlink_log_info(mavlink_fd, "mag off: x:%.2f y:%.2f z:%.2f Ga", (double)mscale.x_offset,
(double)mscale.y_offset, (double)mscale.z_offset);
mavlink_log_info(mavlink_fd, "mag scale: x:%.2f y:%.2f z:%.2f", (double)mscale.x_scale,
(double)mscale.y_scale, (double)mscale.z_scale);
if (res == OK) {
mavlink_log_info(mavlink_fd, CAL_DONE_MSG, sensor_name);
} else {
mavlink_log_info(mavlink_fd, CAL_FAILED_MSG, sensor_name);
}
}
return res;
}
