C++ (Cpp) sprd_add_otg_device Beispiele

Beispiel #1

Datei: board-sp7715eatrisim.c Projekt: Equalizer48/android_kernel_samsung_j13g

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
#if defined(CONFIG_ION) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_ion_addr_param(void);
	    init_ion_addr_param();
	}
#endif
#if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_pstore_addr_param(void);
	    init_pstore_addr_param();
	}
#endif
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
	sprd_sr2351_gpio_ctrl_power_register(GPIO_RF2351_POWER_CTRL_NUM);

}

Beispiel #2

Datei: board.c Projekt: LinkLunk/android_kernel_samsung_mint

static void __init sc8810_init_machine(void)
{
	int clk;
	regulator_add_devices();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_sdio0_device, &sd_detect_gpio, sizeof(sd_detect_gpio));
	platform_device_add_data(&sprd_backlight_device,&ktd253b_data,sizeof(ktd253b_data));
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));

	platform_add_devices(devices, ARRAY_SIZE(devices));
	platform_add_devices(gpio_i2c_devices, ARRAY_SIZE(gpio_i2c_devices));
	
#if defined(CONFIG_SEC_CHARGING_FEATURE)	
	spa_power_init();
#endif
	
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	sprd_ramconsole_init();
#endif
	sys_debug_init();
}

Beispiel #3

Datei: board.c Projekt: 123vipulj/BeastPro-Kernel-Samsung-StarPro

static void __init sc8810_init_machine(void)
{
	int clk;

	pr_err("sc8810_init_machine \n");
			
	regulator_add_devices();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_sdio0_device, &sd_detect_gpio, sizeof(sd_detect_gpio));
	platform_device_add_data(&sprd_backlight_device,&ktd253b_data,sizeof(ktd253b_data));
	clk=48000000;
	platform_device_add_data(&sprd_serial_device0,(const void*)&clk,sizeof(int));
	clk=26000000;
	platform_device_add_data(&sprd_serial_device1,(const void*)&clk,sizeof(int));
	platform_device_add_data(&sprd_serial_device2,(const void*)&clk,sizeof(int));     
    platform_device_add_data(&sprd_sdio0_device, &sd_detect_gpio, sizeof(sd_detect_gpio));//saenghee_testcode : need to ask
    platform_device_add_data(&sprd_backlight_device,&ktd253b_data,sizeof(ktd253b_data));//saenghee_testcode : need to ask
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	sprd_ramconsole_init();
#endif
	sys_debug_init();
}

Beispiel #4

Datei: board.c Projekt: abgoyal/alcatel_ot_4020D_kernel

int __init sc8825_regulator_init(void)
{
	static struct platform_device sc8825_regulator_device = {
		.name 	= "sprd-regulator",
		.id	= -1,
	};
	return platform_device_register(&sc8825_regulator_device);
}

int __init sc8825_clock_init(void)
{
	return 0;
}

static void __init sc8825_init_machine(void)
{
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	sprd_ramconsole_init();
#endif
	sc8825_regulator_init();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
}

Beispiel #5

Datei: board.c Projekt: abgoyal/alcatel_ot_4020D_kernel

static void __init sc8810_init_machine(void)
{
	regulator_add_devices();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	//sprd_spi_init();
}

Beispiel #6

Datei: board.c Projekt: 123vipulj/BeastPro-Kernel-Samsung-StarPro

static void __init sc8810_init_machine(void)
{
	regulator_add_devices();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	sprd_ramconsole_init();
#endif
}

Beispiel #7

Datei: board-sp8730seea.c Projekt: TechTex198/SM-G318H-Kernel-Source

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
#ifndef CONFIG_OF
    #if defined(CONFIG_ION) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_ion_addr_param(void);
	    init_ion_addr_param();
	}
    #endif
    #if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_pstore_addr_param(void);
	    init_pstore_addr_param();
	}
    #endif
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_serial_device3,(const void*)&plat_data3,sizeof(plat_data3));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
#if(defined(CONFIG_BACKLIGHT_SPRD_PWM)||defined(CONFIG_BACKLIGHT_SPRD_PWM_MODULE))
	platform_device_add_data(&sprd_pwm_bl_device, (const void*)&sprd_pwm_bl_platform_data, sizeof(sprd_pwm_bl_platform_data));
#endif
#if(defined(CONFIG_INPUT_HEADSET_SPRD_SC2723)||defined(CONFIG_INPUT_HEADSET_SPRD_SC2723_MODULE))
	platform_device_add_data(&headset_sprd_sc2723_device, (const void*)&headset_sprd_sc2723_pdata, sizeof(headset_sprd_sc2723_pdata));
#endif
#if(defined(CONFIG_SPRD_KPLED_2723) || defined(CONFIG_SPRD_KPLED_2723_MODULE))
	platform_device_add_data(&sprd_kpled_2723_device, (const void*)&sprd_kpled_2723_pdata, sizeof(sprd_kpled_2723_pdata));
#endif
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
#else
	of_platform_populate(NULL, of_sprd_default_bus_match_table, of_sprd_default_bus_lookup, NULL);
#endif
	//sprd_sr2351_vddwpa_ctrl_power_register();
}

Beispiel #8

Datei: board.c Projekt: LinkLunk/android_kernel_samsung_mint

static void __init sc8825_init_machine(void)
{
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	sprd_ramconsole_init();
#endif
	sci_adc_init((void __iomem *)ADC_BASE);
	sc8825_regulator_init();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_backlight_device,&ktd253b_data,sizeof(ktd253b_data));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
}

Beispiel #9

Datei: board.c Projekt: abgoyal/alcatel_ot_4020D_kernel

static void __init sc8810_init_machine(void)
{
	int clk;
	regulator_add_devices();
	sprd_add_otg_device();
	platform_add_devices(devices, ARRAY_SIZE(devices));
	clk=48000000;
	platform_device_add_data(&sprd_serial_device0,(const void*)&clk,sizeof(int));
	clk=26000000;
	platform_device_add_data(&sprd_serial_device1,(const void*)&clk,sizeof(int));
	platform_device_add_data(&sprd_serial_device2,(const void*)&clk,sizeof(int));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
	disable_bm();
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	sprd_ramconsole_init();
#endif
}

Beispiel #10

Datei: board-tsharkwsamsung.c Projekt: Equalizer48/android_kernel_samsung_j13g

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
#ifndef CONFIG_OF
#if defined(CONFIG_ION) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
		extern void init_ion_addr_param(void);
		init_ion_addr_param();
	}
#endif
#if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
		extern void init_pstore_addr_param(void);
		init_pstore_addr_param();
	}
#endif
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
#else
	of_platform_populate(NULL, of_sprd_default_bus_match_table, of_sprd_default_bus_lookup, NULL);
#endif

	sec_class = class_create(THIS_MODULE, "sec");
	if (IS_ERR(sec_class)) {
		pr_err("Failed to create class(sec)!\n");
		printk("Failed create class \n");
		return PTR_ERR(sec_class);
	}
}

Beispiel #11

Datei: board-sp5735ea.c Projekt: AnDrOiiiD/android_kernel_samsung_kanas3gxx

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
}

Beispiel #12

Datei: board-kanas_td.c Projekt: Equalizer48/android_kernel_samsung_j13g

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
#if defined(CONFIG_ION) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_ion_addr_param(void);
	    init_ion_addr_param();
	}
#endif
#if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{ 
	    extern void init_pstore_addr_param(void);
	    init_pstore_addr_param();
	}
#endif
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_serial_device3,(const void*)&plat_data3,sizeof(plat_data3));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_backlight_device,&ktd253b_data,sizeof(ktd253b_data));

// GPS for marvell
#ifdef CONFIG_PROC_FS
	/* create proc for gps GPS control */
	create_sirf_proc_file();
#endif
// GPS for marvell

	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
}