/*
** Generate bytecode that does an UPDATE as part of an upsert.
**
** If pIdx is NULL, then the UNIQUE constraint that failed was the IPK.
** In this case parameter iCur is a cursor open on the table b-tree that
** currently points to the conflicting table row. Otherwise, if pIdx
** is not NULL, then pIdx is the constraint that failed and iCur is a
** cursor points to the conflicting row.
*/
void sqlite3UpsertDoUpdate(
Parse *pParse, /* The parsing and code-generating context */
Upsert *pUpsert, /* The ON CONFLICT clause for the upsert */
Table *pTab, /* The table being updated */
Index *pIdx, /* The UNIQUE constraint that failed */
int iCur /* Cursor for pIdx (or pTab if pIdx==NULL) */
){
Vdbe *v = pParse->pVdbe;
sqlite3 *db = pParse->db;
SrcList *pSrc; /* FROM clause for the UPDATE */
int iDataCur;
assert( v!=0 );
assert( pUpsert!=0 );
VdbeNoopComment((v, "Begin DO UPDATE of UPSERT"));
iDataCur = pUpsert->iDataCur;
if( pIdx && iCur!=iDataCur ){
if( HasRowid(pTab) ){
int regRowid = sqlite3GetTempReg(pParse);
sqlite3VdbeAddOp2(v, OP_IdxRowid, iCur, regRowid);
sqlite3VdbeAddOp3(v, OP_SeekRowid, iDataCur, 0, regRowid);
VdbeCoverage(v);
sqlite3ReleaseTempReg(pParse, regRowid);
}else{
Index *pPk = sqlite3PrimaryKeyIndex(pTab);
int nPk = pPk->nKeyCol;
int iPk = pParse->nMem+1;
int i;
pParse->nMem += nPk;
for(i=0; i<nPk; i++){
int k;
assert( pPk->aiColumn[i]>=0 );
k = sqlite3ColumnOfIndex(pIdx, pPk->aiColumn[i]);
sqlite3VdbeAddOp3(v, OP_Column, iCur, k, iPk+i);
VdbeComment((v, "%s.%s", pIdx->zName,
pTab->aCol[pPk->aiColumn[i]].zName));
}
sqlite3VdbeVerifyAbortable(v, OE_Abort);
i = sqlite3VdbeAddOp4Int(v, OP_Found, iDataCur, 0, iPk, nPk);
VdbeCoverage(v);
sqlite3VdbeAddOp4(v, OP_Halt, SQLITE_CORRUPT, OE_Abort, 0,
"corrupt database", P4_STATIC);
sqlite3VdbeJumpHere(v, i);
}
}
/* pUpsert does not own pUpsertSrc - the outer INSERT statement does. So
** we have to make a copy before passing it down into sqlite3Update() */
pSrc = sqlite3SrcListDup(db, pUpsert->pUpsertSrc, 0);
sqlite3Update(pParse, pSrc, pUpsert->pUpsertSet,
pUpsert->pUpsertWhere, OE_Abort, 0, 0, pUpsert);
pUpsert->pUpsertSet = 0; /* Will have been deleted by sqlite3Update() */
pUpsert->pUpsertWhere = 0; /* Will have been deleted by sqlite3Update() */
VdbeNoopComment((v, "End DO UPDATE of UPSERT"));
}
/*
** This routine generates VDBE code that causes a single row of a
** single table to be deleted.
**
** The VDBE must be in a particular state when this routine is called.
** These are the requirements:
**
** 1. A read/write cursor pointing to pTab, the table containing the row
** to be deleted, must be opened as cursor number "base".
**
** 2. Read/write cursors for all indices of pTab must be open as
** cursor number base+i for the i-th index.
**
** 3. The record number of the row to be deleted must be on the top
** of the stack.
**
** This routine pops the top of the stack to remove the record number
** and then generates code to remove both the table record and all index
** entries that point to that record.
*/
void sqlite3GenerateRowDelete(
sqlite3 *db, /* The database containing the index */
Vdbe *v, /* Generate code into this VDBE */
Table *pTab, /* Table containing the row to be deleted */
int iCur, /* Cursor number for the table */
int count /* Increment the row change counter */
){
int addr;
addr = sqlite3VdbeAddOp(v, OP_NotExists, iCur, 0);
sqlite3GenerateRowIndexDelete(v, pTab, iCur, 0);
sqlite3VdbeAddOp(v, OP_Delete, iCur, (count?OPFLAG_NCHANGE:0));
if( count ){
sqlite3VdbeChangeP3(v, -1, pTab->zName, P3_STATIC);
}
sqlite3VdbeJumpHere(v, addr);
}
/*
** This routine generates VDBE code that causes a single row of a
** single table to be deleted.
**
** The VDBE must be in a particular state when this routine is called.
** These are the requirements:
**
** 1. A read/write cursor pointing to pTab, the table containing the row
** to be deleted, must be opened as cursor number "base".
**
** 2. Read/write cursors for all indices of pTab must be open as
** cursor number base+i for the i-th index.
**
** 3. The record number of the row to be deleted must be stored in
** memory cell iRowid.
**
** This routine pops the top of the stack to remove the record number
** and then generates code to remove both the table record and all index
** entries that point to that record.
*/
void sqlite3GenerateRowDelete(
Parse *pParse, /* Parsing context */
Table *pTab, /* Table containing the row to be deleted */
int iCur, /* Cursor number for the table */
int iRowid, /* Memory cell that contains the rowid to delete */
int count /* Increment the row change counter */
){
int addr;
Vdbe *v;
v = pParse->pVdbe;
addr = sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, iRowid);
sqlite3GenerateRowIndexDelete(pParse, pTab, iCur, 0);
sqlite3VdbeAddOp2(v, OP_Delete, iCur, (count?OPFLAG_NCHANGE:0));
if( count ){
sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_STATIC);
}
sqlite3VdbeJumpHere(v, addr);
}
/*
** Generate code to make sure the file format number is at least minFormat.
** The generated code will increase the file format number if necessary.
*/
void sqlite3MinimumFileFormat(Parse *pParse, int iDb, int minFormat){
Vdbe *v;
v = sqlite3GetVdbe(pParse);
/* The VDBE should have been allocated before this routine is called.
** If that allocation failed, we would have quit before reaching this
** point */
if( ALWAYS(v) ){
int r1 = sqlite3GetTempReg(pParse);
int r2 = sqlite3GetTempReg(pParse);
int j1;
sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, r1, BTREE_FILE_FORMAT);
sqlite3VdbeUsesBtree(v, iDb);
sqlite3VdbeAddOp2(v, OP_Integer, minFormat, r2);
j1 = sqlite3VdbeAddOp3(v, OP_Ge, r2, 0, r1);
sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, r2);
sqlite3VdbeJumpHere(v, j1);
sqlite3ReleaseTempReg(pParse, r1);
sqlite3ReleaseTempReg(pParse, r2);
}
}
/*
** Process an UPDATE statement.
**
** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL;
** \_______/ \________/ \______/ \________________/
* onError pTabList pChanges pWhere
*/
void sqlite3Update(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table in which we should change things */
ExprList *pChanges, /* Things to be changed */
Expr *pWhere, /* The WHERE clause. May be null */
int onError, /* How to handle constraint errors */
ExprList *pOrderBy, /* ORDER BY clause. May be null */
Expr *pLimit, /* LIMIT clause. May be null */
Upsert *pUpsert /* ON CONFLICT clause, or null */
){
int i, j; /* Loop counters */
Table *pTab; /* The table to be updated */
int addrTop = 0; /* VDBE instruction address of the start of the loop */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Vdbe *v; /* The virtual database engine */
Index *pIdx; /* For looping over indices */
Index *pPk; /* The PRIMARY KEY index for WITHOUT ROWID tables */
int nIdx; /* Number of indices that need updating */
int iBaseCur; /* Base cursor number */
int iDataCur; /* Cursor for the canonical data btree */
int iIdxCur; /* Cursor for the first index */
sqlite3 *db; /* The database structure */
int *aRegIdx = 0; /* First register in array assigned to each index */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
u8 *aToOpen; /* 1 for tables and indices to be opened */
u8 chngPk; /* PRIMARY KEY changed in a WITHOUT ROWID table */
u8 chngRowid; /* Rowid changed in a normal table */
u8 chngKey; /* Either chngPk or chngRowid */
Expr *pRowidExpr = 0; /* Expression defining the new record number */
AuthContext sContext; /* The authorization context */
NameContext sNC; /* The name-context to resolve expressions in */
int iDb; /* Database containing the table being updated */
int eOnePass; /* ONEPASS_XXX value from where.c */
int hasFK; /* True if foreign key processing is required */
int labelBreak; /* Jump here to break out of UPDATE loop */
int labelContinue; /* Jump here to continue next step of UPDATE loop */
int flags; /* Flags for sqlite3WhereBegin() */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True when updating a view (INSTEAD OF trigger) */
Trigger *pTrigger; /* List of triggers on pTab, if required */
int tmask; /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */
#endif
int newmask; /* Mask of NEW.* columns accessed by BEFORE triggers */
int iEph = 0; /* Ephemeral table holding all primary key values */
int nKey = 0; /* Number of elements in regKey for WITHOUT ROWID */
int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */
int addrOpen = 0; /* Address of OP_OpenEphemeral */
int iPk = 0; /* First of nPk cells holding PRIMARY KEY value */
i16 nPk = 0; /* Number of components of the PRIMARY KEY */
int bReplace = 0; /* True if REPLACE conflict resolution might happen */
/* Register Allocations */
int regRowCount = 0; /* A count of rows changed */
int regOldRowid = 0; /* The old rowid */
int regNewRowid = 0; /* The new rowid */
int regNew = 0; /* Content of the NEW.* table in triggers */
int regOld = 0; /* Content of OLD.* table in triggers */
int regRowSet = 0; /* Rowset of rows to be updated */
int regKey = 0; /* composite PRIMARY KEY value */
memset(&sContext, 0, sizeof(sContext));
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto update_cleanup;
}
assert( pTabList->nSrc==1 );
/* Locate the table which we want to update.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto update_cleanup;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
/* Figure out if we have any triggers and if the table being
** updated is a view.
*/
#ifndef SQLITE_OMIT_TRIGGER
pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask);
isView = pTab->pSelect!=0;
assert( pTrigger || tmask==0 );
#else
# define pTrigger 0
# define isView 0
# define tmask 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
#ifdef SQLITE_ENABLE_UPDATE_DELETE_LIMIT
if( !isView ){
pWhere = sqlite3LimitWhere(
pParse, pTabList, pWhere, pOrderBy, pLimit, "UPDATE"
);
pOrderBy = 0;
pLimit = 0;
}
#endif
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
if( sqlite3IsReadOnly(pParse, pTab, tmask) ){
goto update_cleanup;
}
/* Allocate a cursors for the main database table and for all indices.
** The index cursors might not be used, but if they are used they
** need to occur right after the database cursor. So go ahead and
** allocate enough space, just in case.
*/
iBaseCur = iDataCur = pParse->nTab++;
iIdxCur = iDataCur+1;
pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab);
testcase( pPk!=0 && pPk!=pTab->pIndex );
for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){
if( pPk==pIdx ){
iDataCur = pParse->nTab;
}
pParse->nTab++;
}
if( pUpsert ){
/* On an UPSERT, reuse the same cursors already opened by INSERT */
iDataCur = pUpsert->iDataCur;
iIdxCur = pUpsert->iIdxCur;
pParse->nTab = iBaseCur;
}
pTabList->a[0].iCursor = iDataCur;
/* Allocate space for aXRef[], aRegIdx[], and aToOpen[].
** Initialize aXRef[] and aToOpen[] to their default values.
*/
aXRef = sqlite3DbMallocRawNN(db, sizeof(int) * (pTab->nCol+nIdx) + nIdx+2 );
if( aXRef==0 ) goto update_cleanup;
aRegIdx = aXRef+pTab->nCol;
aToOpen = (u8*)(aRegIdx+nIdx);
memset(aToOpen, 1, nIdx+1);
aToOpen[nIdx+1] = 0;
for(i=0; i<pTab->nCol; i++) aXRef[i] = -1;
/* Initialize the name-context */
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
sNC.uNC.pUpsert = pUpsert;
sNC.ncFlags = NC_UUpsert;
/* Resolve the column names in all the expressions of the
** of the UPDATE statement. Also find the column index
** for each column to be updated in the pChanges array. For each
** column to be updated, make sure we have authorization to change
** that column.
*/
chngRowid = chngPk = 0;
for(i=0; i<pChanges->nExpr; i++){
if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){
goto update_cleanup;
}
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){
if( j==pTab->iPKey ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else if( pPk && (pTab->aCol[j].colFlags & COLFLAG_PRIMKEY)!=0 ){
chngPk = 1;
}
aXRef[j] = i;
break;
}
}
if( j>=pTab->nCol ){
if( pPk==0 && sqlite3IsRowid(pChanges->a[i].zName) ){
j = -1;
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else{
sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName);
pParse->checkSchema = 1;
goto update_cleanup;
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
j<0 ? "ROWID" : pTab->aCol[j].zName,
db->aDb[iDb].zDbSName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
aXRef[j] = -1;
}
}
#endif
}
assert( (chngRowid & chngPk)==0 );
assert( chngRowid==0 || chngRowid==1 );
assert( chngPk==0 || chngPk==1 );
chngKey = chngRowid + chngPk;
/* The SET expressions are not actually used inside the WHERE loop.
** So reset the colUsed mask. Unless this is a virtual table. In that
** case, set all bits of the colUsed mask (to ensure that the virtual
** table implementation makes all columns available).
*/
pTabList->a[0].colUsed = IsVirtual(pTab) ? ALLBITS : 0;
hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngKey);
/* There is one entry in the aRegIdx[] array for each index on the table
** being updated. Fill in aRegIdx[] with a register number that will hold
** the key for accessing each index.
*/
if( onError==OE_Replace ) bReplace = 1;
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int reg;
if( chngKey || hasFK>1 || pIdx==pPk
|| indexWhereClauseMightChange(pIdx,aXRef,chngRowid)
){
reg = ++pParse->nMem;
pParse->nMem += pIdx->nColumn;
}else{
reg = 0;
for(i=0; i<pIdx->nKeyCol; i++){
if( indexColumnIsBeingUpdated(pIdx, i, aXRef, chngRowid) ){
reg = ++pParse->nMem;
pParse->nMem += pIdx->nColumn;
if( onError==OE_Default && pIdx->onError==OE_Replace ){
bReplace = 1;
}
break;
}
}
}
if( reg==0 ) aToOpen[j+1] = 0;
aRegIdx[j] = reg;
}
if( bReplace ){
/* If REPLACE conflict resolution might be invoked, open cursors on all
** indexes in case they are needed to delete records. */
memset(aToOpen, 1, nIdx+1);
}
/* Begin generating code. */
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto update_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, pTrigger || hasFK, iDb);
/* Allocate required registers. */
if( !IsVirtual(pTab) ){
regRowSet = ++pParse->nMem;
regOldRowid = regNewRowid = ++pParse->nMem;
if( chngPk || pTrigger || hasFK ){
regOld = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
if( chngKey || pTrigger || hasFK ){
regNewRowid = ++pParse->nMem;
}
regNew = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
/* Start the view context. */
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* If we are trying to update a view, realize that view into
** an ephemeral table.
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab,
pWhere, pOrderBy, pLimit, iDataCur
);
pOrderBy = 0;
pLimit = 0;
}
#endif
/* Resolve the column names in all the expressions in the
** WHERE clause.
*/
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto update_cleanup;
}
#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Virtual tables must be handled separately */
if( IsVirtual(pTab) ){
updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef,
pWhere, onError);
goto update_cleanup;
}
#endif
/* Jump to labelBreak to abandon further processing of this UPDATE */
labelContinue = labelBreak = sqlite3VdbeMakeLabel(pParse);
/* Not an UPSERT. Normal processing. Begin by
** initialize the count of updated rows */
if( (db->flags&SQLITE_CountRows)!=0
&& !pParse->pTriggerTab
&& !pParse->nested
&& pUpsert==0
){
regRowCount = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
}
if( HasRowid(pTab) ){
sqlite3VdbeAddOp3(v, OP_Null, 0, regRowSet, regOldRowid);
}else{
assert( pPk!=0 );
nPk = pPk->nKeyCol;
iPk = pParse->nMem+1;
pParse->nMem += nPk;
regKey = ++pParse->nMem;
if( pUpsert==0 ){
iEph = pParse->nTab++;
sqlite3VdbeAddOp3(v, OP_Null, 0, iPk, iPk+nPk-1);
addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk);
sqlite3VdbeSetP4KeyInfo(pParse, pPk);
}
}
if( pUpsert ){
/* If this is an UPSERT, then all cursors have already been opened by
** the outer INSERT and the data cursor should be pointing at the row
** that is to be updated. So bypass the code that searches for the
** row(s) to be updated.
*/
pWInfo = 0;
eOnePass = ONEPASS_SINGLE;
sqlite3ExprIfFalse(pParse, pWhere, labelBreak, SQLITE_JUMPIFNULL);
}else{
/* Begin the database scan.
**
** Do not consider a single-pass strategy for a multi-row update if
** there are any triggers or foreign keys to process, or rows may
** be deleted as a result of REPLACE conflict handling. Any of these
** things might disturb a cursor being used to scan through the table
** or index, causing a single-pass approach to malfunction. */
flags = WHERE_ONEPASS_DESIRED|WHERE_SEEK_UNIQ_TABLE;
if( !pParse->nested && !pTrigger && !hasFK && !chngKey && !bReplace ){
flags |= WHERE_ONEPASS_MULTIROW;
}
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, flags, iIdxCur);
if( pWInfo==0 ) goto update_cleanup;
/* A one-pass strategy that might update more than one row may not
** be used if any column of the index used for the scan is being
** updated. Otherwise, if there is an index on "b", statements like
** the following could create an infinite loop:
**
** UPDATE t1 SET b=b+1 WHERE b>?
**
** Fall back to ONEPASS_OFF if where.c has selected a ONEPASS_MULTI
** strategy that uses an index for which one or more columns are being
** updated. */
eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
if( eOnePass!=ONEPASS_SINGLE ){
sqlite3MultiWrite(pParse);
if( eOnePass==ONEPASS_MULTI ){
int iCur = aiCurOnePass[1];
if( iCur>=0 && iCur!=iDataCur && aToOpen[iCur-iBaseCur] ){
eOnePass = ONEPASS_OFF;
}
assert( iCur!=iDataCur || !HasRowid(pTab) );
}
}
}
if( HasRowid(pTab) ){
/* Read the rowid of the current row of the WHERE scan. In ONEPASS_OFF
** mode, write the rowid into the FIFO. In either of the one-pass modes,
** leave it in register regOldRowid. */
sqlite3VdbeAddOp2(v, OP_Rowid, iDataCur, regOldRowid);
if( eOnePass==ONEPASS_OFF ){
sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
}
}else{
/* Read the PK of the current row into an array of registers. In
** ONEPASS_OFF mode, serialize the array into a record and store it in
** the ephemeral table. Or, in ONEPASS_SINGLE or MULTI mode, change
** the OP_OpenEphemeral instruction to a Noop (the ephemeral table
** is not required) and leave the PK fields in the array of registers. */
for(i=0; i<nPk; i++){
assert( pPk->aiColumn[i]>=0 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur,pPk->aiColumn[i],iPk+i);
}
if( eOnePass ){
if( addrOpen ) sqlite3VdbeChangeToNoop(v, addrOpen);
nKey = nPk;
regKey = iPk;
}else{
sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, regKey,
sqlite3IndexAffinityStr(db, pPk), nPk);
sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iEph, regKey, iPk, nPk);
}
}
if( pUpsert==0 ){
if( eOnePass!=ONEPASS_MULTI ){
sqlite3WhereEnd(pWInfo);
}
if( !isView ){
int addrOnce = 0;
/* Open every index that needs updating. */
if( eOnePass!=ONEPASS_OFF ){
if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0;
if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0;
}
if( eOnePass==ONEPASS_MULTI && (nIdx-(aiCurOnePass[1]>=0))>0 ){
addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
}
sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur,
aToOpen, 0, 0);
if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce);
}
/* Top of the update loop */
if( eOnePass!=ONEPASS_OFF ){
if( !isView && aiCurOnePass[0]!=iDataCur && aiCurOnePass[1]!=iDataCur ){
assert( pPk );
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey,nKey);
VdbeCoverage(v);
}
if( eOnePass!=ONEPASS_SINGLE ){
labelContinue = sqlite3VdbeMakeLabel(pParse);
}
sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak);
VdbeCoverageIf(v, pPk==0);
VdbeCoverageIf(v, pPk!=0);
}else if( pPk ){
labelContinue = sqlite3VdbeMakeLabel(pParse);
sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v);
addrTop = sqlite3VdbeAddOp2(v, OP_RowData, iEph, regKey);
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0);
VdbeCoverage(v);
}else{
labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet,labelBreak,
regOldRowid);
VdbeCoverage(v);
sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid);
VdbeCoverage(v);
}
}
/* If the rowid value will change, set register regNewRowid to
** contain the new value. If the rowid is not being modified,
** then regNewRowid is the same register as regOldRowid, which is
** already populated. */
assert( chngKey || pTrigger || hasFK || regOldRowid==regNewRowid );
if( chngRowid ){
sqlite3ExprCode(pParse, pRowidExpr, regNewRowid);
sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid); VdbeCoverage(v);
}
/* Compute the old pre-UPDATE content of the row being changed, if that
** information is needed */
if( chngPk || hasFK || pTrigger ){
u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0);
oldmask |= sqlite3TriggerColmask(pParse,
pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( oldmask==0xffffffff
|| (i<32 && (oldmask & MASKBIT32(i))!=0)
|| (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0
){
testcase( oldmask!=0xffffffff && i==31 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regOld+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i);
}
}
if( chngRowid==0 && pPk==0 ){
sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid);
}
}
/* Populate the array of registers beginning at regNew with the new
** row data. This array is used to check constants, create the new
** table and index records, and as the values for any new.* references
** made by triggers.
**
** If there are one or more BEFORE triggers, then do not populate the
** registers associated with columns that are (a) not modified by
** this UPDATE statement and (b) not accessed by new.* references. The
** values for registers not modified by the UPDATE must be reloaded from
** the database after the BEFORE triggers are fired anyway (as the trigger
** may have modified them). So not loading those that are not going to
** be used eliminates some redundant opcodes.
*/
newmask = sqlite3TriggerColmask(
pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}else{
j = aXRef[i];
if( j>=0 ){
sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i);
}else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask & MASKBIT32(i)) ){
/* This branch loads the value of a column that will not be changed
** into a register. This is done if there are no BEFORE triggers, or
** if there are one or more BEFORE triggers that use this value via
** a new.* reference in a trigger program.
*/
testcase( i==31 );
testcase( i==32 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}
}
}
/* Fire any BEFORE UPDATE triggers. This happens before constraints are
** verified. One could argue that this is wrong.
*/
if( tmask&TRIGGER_BEFORE ){
sqlite3TableAffinity(v, pTab, regNew);
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_BEFORE, pTab, regOldRowid, onError, labelContinue);
/* The row-trigger may have deleted the row being updated. In this
** case, jump to the next row. No updates or AFTER triggers are
** required. This behavior - what happens when the row being updated
** is deleted or renamed by a BEFORE trigger - is left undefined in the
** documentation.
*/
if( pPk ){
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue,regKey,nKey);
VdbeCoverage(v);
}else{
sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid);
VdbeCoverage(v);
}
/* After-BEFORE-trigger-reload-loop:
** If it did not delete it, the BEFORE trigger may still have modified
** some of the columns of the row being updated. Load the values for
** all columns not modified by the update statement into their registers
** in case this has happened. Only unmodified columns are reloaded.
** The values computed for modified columns use the values before the
** BEFORE trigger runs. See test case trigger1-18.0 (added 2018-04-26)
** for an example.
*/
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]<0 && i!=pTab->iPKey ){
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i);
}
}
}
if( !isView ){
int addr1 = 0; /* Address of jump instruction */
/* Do constraint checks. */
assert( regOldRowid>0 );
sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur,
regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace,
aXRef, 0);
/* Do FK constraint checks. */
if( hasFK ){
sqlite3FkCheck(pParse, pTab, regOldRowid, 0, aXRef, chngKey);
}
/* Delete the index entries associated with the current record. */
if( bReplace || chngKey ){
if( pPk ){
addr1 = sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, 0, regKey, nKey);
}else{
addr1 = sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, 0, regOldRowid);
}
VdbeCoverageNeverTaken(v);
}
sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, aRegIdx, -1);
/* If changing the rowid value, or if there are foreign key constraints
** to process, delete the old record. Otherwise, add a noop OP_Delete
** to invoke the pre-update hook.
**
** That (regNew==regnewRowid+1) is true is also important for the
** pre-update hook. If the caller invokes preupdate_new(), the returned
** value is copied from memory cell (regNewRowid+1+iCol), where iCol
** is the column index supplied by the user.
*/
assert( regNew==regNewRowid+1 );
#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
sqlite3VdbeAddOp3(v, OP_Delete, iDataCur,
OPFLAG_ISUPDATE | ((hasFK>1 || chngKey) ? 0 : OPFLAG_ISNOOP),
regNewRowid
);
if( eOnePass==ONEPASS_MULTI ){
assert( hasFK==0 && chngKey==0 );
sqlite3VdbeChangeP5(v, OPFLAG_SAVEPOSITION);
}
if( !pParse->nested ){
sqlite3VdbeAppendP4(v, pTab, P4_TABLE);
}
#else
if( hasFK>1 || chngKey ){
sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, 0);
}
#endif
if( bReplace || chngKey ){
sqlite3VdbeJumpHere(v, addr1);
}
if( hasFK ){
sqlite3FkCheck(pParse, pTab, 0, regNewRowid, aXRef, chngKey);
}
/* Insert the new index entries and the new record. */
sqlite3CompleteInsertion(
pParse, pTab, iDataCur, iIdxCur, regNewRowid, aRegIdx,
OPFLAG_ISUPDATE | (eOnePass==ONEPASS_MULTI ? OPFLAG_SAVEPOSITION : 0),
0, 0
);
/* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
** handle rows (possibly in other tables) that refer via a foreign key
** to the row just updated. */
if( hasFK ){
sqlite3FkActions(pParse, pTab, pChanges, regOldRowid, aXRef, chngKey);
}
}
/* Increment the row counter
*/
if( regRowCount ){
sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1);
}
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_AFTER, pTab, regOldRowid, onError, labelContinue);
/* Repeat the above with the next record to be updated, until
** all record selected by the WHERE clause have been updated.
*/
if( eOnePass==ONEPASS_SINGLE ){
/* Nothing to do at end-of-loop for a single-pass */
}else if( eOnePass==ONEPASS_MULTI ){
sqlite3VdbeResolveLabel(v, labelContinue);
sqlite3WhereEnd(pWInfo);
}else if( pPk ){
sqlite3VdbeResolveLabel(v, labelContinue);
sqlite3VdbeAddOp2(v, OP_Next, iEph, addrTop); VdbeCoverage(v);
}else{
sqlite3VdbeGoto(v, labelContinue);
}
sqlite3VdbeResolveLabel(v, labelBreak);
/* Update the sqlite_sequence table by storing the content of the
** maximum rowid counter values recorded while inserting into
** autoincrement tables.
*/
if( pParse->nested==0 && pParse->pTriggerTab==0 && pUpsert==0 ){
sqlite3AutoincrementEnd(pParse);
}
/*
** Return the number of rows that were changed, if we are tracking
** that information.
*/
if( regRowCount ){
sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC);
}
update_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3DbFree(db, aXRef); /* Also frees aRegIdx[] and aToOpen[] */
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprListDelete(db, pChanges);
sqlite3ExprDelete(db, pWhere);
#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT)
sqlite3ExprListDelete(db, pOrderBy);
sqlite3ExprDelete(db, pLimit);
#endif
return;
}
static void updateVirtualTable(
Parse *pParse,
SrcList *pSrc,
Table *pTab,
ExprList *pChanges,
Expr *pRowid,
int *aXRef,
Expr *pWhere
){
Vdbe *v = pParse->pVdbe;
ExprList *pEList = 0;
Select *pSelect = 0;
Expr *pExpr;
int ephemTab;
int i;
int addr;
int iReg;
sqlite3 *db = pParse->db;
const char *pVTab = (const char*)sqlite3GetVTable(db, pTab);
SelectDest dest;
pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ID, "_rowid_"));
if( pRowid ){
pEList = sqlite3ExprListAppend(pParse, pEList,
sqlite3ExprDup(db, pRowid, 0));
}
assert( pTab->iPKey<0 );
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]>=0 ){
pExpr = sqlite3ExprDup(db, pChanges->a[aXRef[i]].pExpr, 0);
}else{
pExpr = sqlite3Expr(db, TK_ID, pTab->aCol[i].zName);
}
pEList = sqlite3ExprListAppend(pParse, pEList, pExpr);
}
pSelect = sqlite3SelectNew(pParse, pEList, pSrc, pWhere, 0, 0, 0, 0, 0, 0);
assert( v );
ephemTab = pParse->nTab++;
sqlite3VdbeAddOp2(v, OP_OpenEphemeral, ephemTab, pTab->nCol+1+(pRowid!=0));
sqlite3VdbeChangeP5(v, BTREE_UNORDERED);
sqlite3SelectDestInit(&dest, SRT_Table, ephemTab);
sqlite3Select(pParse, pSelect, &dest);
iReg = ++pParse->nMem;
pParse->nMem += pTab->nCol+1;
addr = sqlite3VdbeAddOp2(v, OP_Rewind, ephemTab, 0);
sqlite3VdbeAddOp3(v, OP_Column, ephemTab, 0, iReg);
sqlite3VdbeAddOp3(v, OP_Column, ephemTab, (pRowid?1:0), iReg+1);
for(i=0; i<pTab->nCol; i++){
sqlite3VdbeAddOp3(v, OP_Column, ephemTab, i+1+(pRowid!=0), iReg+2+i);
}
sqlite3VtabMakeWritable(pParse, pTab);
sqlite3VdbeAddOp4(v, OP_VUpdate, 0, pTab->nCol+2, iReg, pVTab, P4_VTAB);
sqlite3MayAbort(pParse);
sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1);
sqlite3VdbeJumpHere(v, addr);
sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0);
sqlite3SelectDelete(db, pSelect);
}
/*
** Process an UPDATE statement.
**
** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL;
** \_______/ \________/ \______/ \________________/
* onError pTabList pChanges pWhere
*/
void sqlite3Update(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table in which we should change things */
ExprList *pChanges, /* Things to be changed */
Expr *pWhere, /* The WHERE clause. May be null */
int onError /* How to handle constraint errors */
){
int i, j; /* Loop counters */
Table *pTab; /* The table to be updated */
int addr = 0; /* VDBE instruction address of the start of the loop */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Vdbe *v; /* The virtual database engine */
Index *pIdx; /* For looping over indices */
int nIdx; /* Number of indices that need updating */
int iCur; /* VDBE Cursor number of pTab */
sqlite3 *db; /* The database structure */
int *aRegIdx = 0; /* One register assigned to each index to be updated */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
int chngRowid; /* True if the record number is being changed */
Expr *pRowidExpr = 0; /* Expression defining the new record number */
int openAll = 0; /* True if all indices need to be opened */
AuthContext sContext; /* The authorization context */
NameContext sNC; /* The name-context to resolve expressions in */
int iDb; /* Database containing the table being updated */
int okOnePass; /* True for one-pass algorithm without the FIFO */
int hasFK; /* True if foreign key processing is required */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True when updating a view (INSTEAD OF trigger) */
Trigger *pTrigger; /* List of triggers on pTab, if required */
int tmask; /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */
#endif
int newmask; /* Mask of NEW.* columns accessed by BEFORE triggers */
/* Register Allocations */
int regRowCount = 0; /* A count of rows changed */
int regOldRowid; /* The old rowid */
int regNewRowid; /* The new rowid */
int regNew;
int regOld = 0;
int regRowSet = 0; /* Rowset of rows to be updated */
int regRec; /* Register used for new table record to insert */
memset(&sContext, 0, sizeof(sContext));
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto update_cleanup;
}
assert( pTabList->nSrc==1 );
/* Locate the table which we want to update.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto update_cleanup;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
/* Figure out if we have any triggers and if the table being
** updated is a view.
*/
#ifndef SQLITE_OMIT_TRIGGER
pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask);
isView = pTab->pSelect!=0;
assert( pTrigger || tmask==0 );
#else
# define pTrigger 0
# define isView 0
# define tmask 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
if( sqlite3IsReadOnly(pParse, pTab, tmask) ){
goto update_cleanup;
}
aXRef = sqlite3DbMallocRaw(db, sizeof(int) * pTab->nCol );
if( aXRef==0 ) goto update_cleanup;
for(i=0; i<pTab->nCol; i++) aXRef[i] = -1;
/* Allocate a cursors for the main database table and for all indices.
** The index cursors might not be used, but if they are used they
** need to occur right after the database cursor. So go ahead and
** allocate enough space, just in case.
*/
pTabList->a[0].iCursor = iCur = pParse->nTab++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
pParse->nTab++;
}
/* Initialize the name-context */
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
/* Resolve the column names in all the expressions of the
** of the UPDATE statement. Also find the column index
** for each column to be updated in the pChanges array. For each
** column to be updated, make sure we have authorization to change
** that column.
*/
chngRowid = 0;
for(i=0; i<pChanges->nExpr; i++){
if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){
goto update_cleanup;
}
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){
if( j==pTab->iPKey ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}
aXRef[j] = i;
break;
}
}
if( j>=pTab->nCol ){
if( sqlite3IsRowid(pChanges->a[i].zName) ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else{
sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName);
pParse->checkSchema = 1;
goto update_cleanup;
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
pTab->aCol[j].zName, db->aDb[iDb].zName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
aXRef[j] = -1;
}
}
#endif
}
hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngRowid);
/* Allocate memory for the array aRegIdx[]. There is one entry in the
** array for each index associated with table being updated. Fill in
** the value with a register number for indices that are to be used
** and with zero for unused indices.
*/
for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){}
if( nIdx>0 ){
aRegIdx = sqlite3DbMallocRaw(db, sizeof(Index*) * nIdx );
if( aRegIdx==0 ) goto update_cleanup;
}
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int reg;
if( chngRowid ){
reg = ++pParse->nMem;
}else{
reg = 0;
for(i=0; i<pIdx->nColumn; i++){
if( aXRef[pIdx->aiColumn[i]]>=0 ){
reg = ++pParse->nMem;
break;
}
}
}
aRegIdx[j] = reg;
}
/* Begin generating code. */
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto update_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, 1, iDb);
#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Virtual tables must be handled separately */
if( IsVirtual(pTab) ){
updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef,
pWhere);
pWhere = 0;
pTabList = 0;
goto update_cleanup;
}
#endif
/* Allocate required registers. */
regOldRowid = regNewRowid = ++pParse->nMem;
if( pTrigger || hasFK ){
regOld = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
if( chngRowid || pTrigger || hasFK ){
regNewRowid = ++pParse->nMem;
}
regNew = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
regRec = ++pParse->nMem;
/* Start the view context. */
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* If we are trying to update a view, realize that view into
** a ephemeral table.
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab, pWhere, iCur);
}
#endif
/* Resolve the column names in all the expressions in the
** WHERE clause.
*/
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto update_cleanup;
}
/* Begin the database scan
*/
sqlite3VdbeAddOp2(v, OP_Null, 0, regOldRowid);
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere,0, WHERE_ONEPASS_DESIRED);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = pWInfo->okOnePass;
/* Remember the rowid of every item to be updated.
*/
sqlite3VdbeAddOp2(v, OP_Rowid, iCur, regOldRowid);
if( !okOnePass ){
regRowSet = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
}
/* End the database scan loop.
*/
sqlite3WhereEnd(pWInfo);
/* Initialize the count of updated rows
*/
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){
regRowCount = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
}
if( !isView ){
/*
** Open every index that needs updating. Note that if any
** index could potentially invoke a REPLACE conflict resolution
** action, then we need to open all indices because we might need
** to be deleting some records.
*/
if( !okOnePass ) sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenWrite);
if( onError==OE_Replace ){
openAll = 1;
}else{
openAll = 0;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
if( pIdx->onError==OE_Replace ){
openAll = 1;
break;
}
}
}
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aRegIdx[i]>0 ){
KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx);
sqlite3VdbeAddOp4(v, OP_OpenWrite, iCur+i+1, pIdx->tnum, iDb,
(char*)pKey, P4_KEYINFO_HANDOFF);
assert( pParse->nTab>iCur+i+1 );
}
}
}
/* Top of the update loop */
if( okOnePass ){
int a1 = sqlite3VdbeAddOp1(v, OP_NotNull, regOldRowid);
addr = sqlite3VdbeAddOp0(v, OP_Goto);
sqlite3VdbeJumpHere(v, a1);
}else{
addr = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, 0, regOldRowid);
}
/* Make cursor iCur point to the record that is being updated. If
** this record does not exist for some reason (deleted by a trigger,
** for example, then jump to the next iteration of the RowSet loop. */
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, regOldRowid);
/* If the record number will change, set register regNewRowid to
** contain the new value. If the record number is not being modified,
** then regNewRowid is the same register as regOldRowid, which is
** already populated. */
assert( chngRowid || pTrigger || hasFK || regOldRowid==regNewRowid );
if( chngRowid ){
sqlite3ExprCode(pParse, pRowidExpr, regNewRowid);
sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid);
}
/* If there are triggers on this table, populate an array of registers
** with the required old.* column data. */
if( hasFK || pTrigger ){
u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0);
oldmask |= sqlite3TriggerColmask(pParse,
pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]<0 || oldmask==0xffffffff || (oldmask & (1<<i)) ){
sqlite3ExprCodeGetColumnOfTable(v, pTab, iCur, i, regOld+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i);
}
}
if( chngRowid==0 ){
sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid);
}
}
/* Populate the array of registers beginning at regNew with the new
** row data. This array is used to check constaints, create the new
** table and index records, and as the values for any new.* references
** made by triggers.
**
** If there are one or more BEFORE triggers, then do not populate the
** registers associated with columns that are (a) not modified by
** this UPDATE statement and (b) not accessed by new.* references. The
** values for registers not modified by the UPDATE must be reloaded from
** the database after the BEFORE triggers are fired anyway (as the trigger
** may have modified them). So not loading those that are not going to
** be used eliminates some redundant opcodes.
*/
newmask = sqlite3TriggerColmask(
pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}else{
j = aXRef[i];
if( j>=0 ){
sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i);
}else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask&(1<<i)) ){
/* This branch loads the value of a column that will not be changed
** into a register. This is done if there are no BEFORE triggers, or
** if there are one or more BEFORE triggers that use this value via
** a new.* reference in a trigger program.
*/
testcase( i==31 );
testcase( i==32 );
sqlite3VdbeAddOp3(v, OP_Column, iCur, i, regNew+i);
sqlite3ColumnDefault(v, pTab, i, regNew+i);
}
}
}
/* Fire any BEFORE UPDATE triggers. This happens before constraints are
** verified. One could argue that this is wrong.
*/
if( tmask&TRIGGER_BEFORE ){
sqlite3VdbeAddOp2(v, OP_Affinity, regNew, pTab->nCol);
sqlite3TableAffinityStr(v, pTab);
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_BEFORE, pTab, regOldRowid, onError, addr);
/* The row-trigger may have deleted the row being updated. In this
** case, jump to the next row. No updates or AFTER triggers are
** required. This behaviour - what happens when the row being updated
** is deleted or renamed by a BEFORE trigger - is left undefined in the
** documentation.
*/
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, regOldRowid);
/* If it did not delete it, the row-trigger may still have modified
** some of the columns of the row being updated. Load the values for
** all columns not modified by the update statement into their
** registers in case this has happened.
*/
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]<0 && i!=pTab->iPKey ){
sqlite3VdbeAddOp3(v, OP_Column, iCur, i, regNew+i);
sqlite3ColumnDefault(v, pTab, i, regNew+i);
}
}
}
if( !isView ){
int j1; /* Address of jump instruction */
/* Do constraint checks. */
sqlite3GenerateConstraintChecks(pParse, pTab, iCur, regNewRowid,
aRegIdx, (chngRowid?regOldRowid:0), 1, onError, addr, 0);
/* Do FK constraint checks. */
if( hasFK ){
sqlite3FkCheck(pParse, pTab, regOldRowid, 0);
}
/* Delete the index entries associated with the current record. */
j1 = sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, regOldRowid);
sqlite3GenerateRowIndexDelete(pParse, pTab, iCur, aRegIdx);
/* If changing the record number, delete the old record. */
if( hasFK || chngRowid ){
sqlite3VdbeAddOp2(v, OP_Delete, iCur, 0);
}
sqlite3VdbeJumpHere(v, j1);
if( hasFK ){
sqlite3FkCheck(pParse, pTab, 0, regNewRowid);
}
/* Insert the new index entries and the new record. */
sqlite3CompleteInsertion(pParse, pTab, iCur, regNewRowid, aRegIdx, 1, 0, 0);
/* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
** handle rows (possibly in other tables) that refer via a foreign key
** to the row just updated. */
if( hasFK ){
sqlite3FkActions(pParse, pTab, pChanges, regOldRowid);
}
}
/* Increment the row counter
*/
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){
sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1);
}
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_AFTER, pTab, regOldRowid, onError, addr);
/* Repeat the above with the next record to be updated, until
** all record selected by the WHERE clause have been updated.
*/
sqlite3VdbeAddOp2(v, OP_Goto, 0, addr);
sqlite3VdbeJumpHere(v, addr);
/* Close all tables */
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aRegIdx[i]>0 ){
sqlite3VdbeAddOp2(v, OP_Close, iCur+i+1, 0);
}
}
sqlite3VdbeAddOp2(v, OP_Close, iCur, 0);
/* Update the sqlite_sequence table by storing the content of the
** maximum rowid counter values recorded while inserting into
** autoincrement tables.
*/
if( pParse->nested==0 && pParse->pTriggerTab==0 ){
sqlite3AutoincrementEnd(pParse);
}
/*
** Return the number of rows that were changed. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){
sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC);
}
update_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3DbFree(db, aRegIdx);
sqlite3DbFree(db, aXRef);
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprListDelete(db, pChanges);
sqlite3ExprDelete(db, pWhere);
return;
}
/*
** Generate code for a DELETE FROM statement.
**
** DELETE FROM table_wxyz WHERE a<5 AND b NOT NULL;
** \________/ \________________/
** pTabList pWhere
*/
void sqlite3DeleteFrom(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table from which we should delete things */
Expr *pWhere /* The WHERE clause. May be null */
){
Vdbe *v; /* The virtual database engine */
Table *pTab; /* The table from which records will be deleted */
const char *zDb; /* Name of database holding pTab */
int end, addr = 0; /* A couple addresses of generated code */
int i; /* Loop counter */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Index *pIdx; /* For looping over indices of the table */
int iCur; /* VDBE Cursor number for pTab */
sqlite3 *db; /* Main database structure */
AuthContext sContext; /* Authorization context */
int oldIdx = -1; /* Cursor for the OLD table of AFTER triggers */
NameContext sNC; /* Name context to resolve expressions in */
int iDb; /* Database number */
int memCnt = -1; /* Memory cell used for change counting */
int rcauth; /* Value returned by authorization callback */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True if attempting to delete from a view */
int triggers_exist = 0; /* True if any triggers exist */
#endif
int iBeginAfterTrigger = 0; /* Address of after trigger program */
int iEndAfterTrigger = 0; /* Exit of after trigger program */
int iBeginBeforeTrigger = 0; /* Address of before trigger program */
int iEndBeforeTrigger = 0; /* Exit of before trigger program */
u32 old_col_mask = 0; /* Mask of OLD.* columns in use */
sContext.pParse = 0;
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto delete_from_cleanup;
}
assert( pTabList->nSrc==1 );
/* Locate the table which we want to delete. This table has to be
** put in an SrcList structure because some of the subroutines we
** will be calling are designed to work with multiple tables and expect
** an SrcList* parameter instead of just a Table* parameter.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto delete_from_cleanup;
/* Figure out if we have any triggers and if the table being
** deleted from is a view
*/
#ifndef SQLITE_OMIT_TRIGGER
triggers_exist = sqlite3TriggersExist(pTab, TK_DELETE, 0);
isView = pTab->pSelect!=0;
#else
# define triggers_exist 0
# define isView 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
if( sqlite3IsReadOnly(pParse, pTab, triggers_exist) ){
goto delete_from_cleanup;
}
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
assert( iDb<db->nDb );
zDb = db->aDb[iDb].zName;
rcauth = sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0, zDb);
assert( rcauth==SQLITE_OK || rcauth==SQLITE_DENY || rcauth==SQLITE_IGNORE );
if( rcauth==SQLITE_DENY ){
goto delete_from_cleanup;
}
assert(!isView || triggers_exist);
/* If pTab is really a view, make sure it has been initialized.
*/
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto delete_from_cleanup;
}
/* Allocate a cursor used to store the old.* data for a trigger.
*/
if( triggers_exist ){
oldIdx = pParse->nTab++;
}
/* Assign cursor number to the table and all its indices.
*/
assert( pTabList->nSrc==1 );
iCur = pTabList->a[0].iCursor = pParse->nTab++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
pParse->nTab++;
}
/* Start the view context
*/
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* Begin generating code.
*/
v = sqlite3GetVdbe(pParse);
if( v==0 ){
goto delete_from_cleanup;
}
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, triggers_exist, iDb);
if( triggers_exist ){
int orconf = ((pParse->trigStack)?pParse->trigStack->orconf:OE_Default);
int iGoto = sqlite3VdbeAddOp0(v, OP_Goto);
addr = sqlite3VdbeMakeLabel(v);
iBeginBeforeTrigger = sqlite3VdbeCurrentAddr(v);
(void)sqlite3CodeRowTrigger(pParse, TK_DELETE, 0, TRIGGER_BEFORE, pTab,
-1, oldIdx, orconf, addr, &old_col_mask, 0);
iEndBeforeTrigger = sqlite3VdbeAddOp0(v, OP_Goto);
iBeginAfterTrigger = sqlite3VdbeCurrentAddr(v);
(void)sqlite3CodeRowTrigger(pParse, TK_DELETE, 0, TRIGGER_AFTER, pTab, -1,
oldIdx, orconf, addr, &old_col_mask, 0);
iEndAfterTrigger = sqlite3VdbeAddOp0(v, OP_Goto);
sqlite3VdbeJumpHere(v, iGoto);
}
/* If we are trying to delete from a view, realize that view into
** a ephemeral table.
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab, pWhere, iCur);
}
#endif
/* Resolve the column names in the WHERE clause.
*/
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto delete_from_cleanup;
}
/* Initialize the counter of the number of rows deleted, if
** we are counting rows.
*/
if( db->flags & SQLITE_CountRows ){
memCnt = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, memCnt);
}
#ifndef SQLITE_OMIT_TRUNCATE_OPTIMIZATION
/* Special case: A DELETE without a WHERE clause deletes everything.
** It is easier just to erase the whole table. Note, however, that
** this means that the row change count will be incorrect.
*/
if( rcauth==SQLITE_OK && pWhere==0 && !triggers_exist && !IsVirtual(pTab) ){
assert( !isView );
sqlite3VdbeAddOp3(v, OP_Clear, pTab->tnum, iDb, memCnt);
if( !pParse->nested ){
sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_STATIC);
}
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
assert( pIdx->pSchema==pTab->pSchema );
sqlite3VdbeAddOp2(v, OP_Clear, pIdx->tnum, iDb);
}
}else
#endif /* SQLITE_OMIT_TRUNCATE_OPTIMIZATION */
/* The usual case: There is a WHERE clause so we have to scan through
** the table and pick which records to delete.
*/
{
int iRowid = ++pParse->nMem; /* Used for storing rowid values. */
int iRowSet = ++pParse->nMem; /* Register for rowset of rows to delete */
/* Begin the database scan
*/
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0);
if( pWInfo==0 ) goto delete_from_cleanup;
/* Remember the rowid of every item to be deleted.
*/
sqlite3VdbeAddOp2(v, IsVirtual(pTab) ? OP_VRowid : OP_Rowid, iCur, iRowid);
sqlite3VdbeAddOp2(v, OP_RowSetAdd, iRowSet, iRowid);
if( db->flags & SQLITE_CountRows ){
sqlite3VdbeAddOp2(v, OP_AddImm, memCnt, 1);
}
/* End the database scan loop.
*/
sqlite3WhereEnd(pWInfo);
/* Open the pseudo-table used to store OLD if there are triggers.
*/
if( triggers_exist ){
sqlite3VdbeAddOp2(v, OP_SetNumColumns, 0, pTab->nCol);
sqlite3VdbeAddOp1(v, OP_OpenPseudo, oldIdx);
}
/* Delete every item whose key was written to the list during the
** database scan. We have to delete items after the scan is complete
** because deleting an item can change the scan order.
*/
end = sqlite3VdbeMakeLabel(v);
if( !isView ){
/* Open cursors for the table we are deleting from and
** all its indices.
*/
sqlite3OpenTableAndIndices(pParse, pTab, iCur, OP_OpenWrite);
}
/* This is the beginning of the delete loop. If a trigger encounters
** an IGNORE constraint, it jumps back to here.
*/
if( triggers_exist ){
sqlite3VdbeResolveLabel(v, addr);
}
addr = sqlite3VdbeAddOp3(v, OP_RowSetRead, iRowSet, end, iRowid);
if( triggers_exist ){
int iData = ++pParse->nMem; /* For storing row data of OLD table */
/* If the record is no longer present in the table, jump to the
** next iteration of the loop through the contents of the fifo.
*/
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, iRowid);
/* Populate the OLD.* pseudo-table */
if( old_col_mask ){
sqlite3VdbeAddOp2(v, OP_RowData, iCur, iData);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, iData);
}
sqlite3VdbeAddOp3(v, OP_Insert, oldIdx, iData, iRowid);
/* Jump back and run the BEFORE triggers */
sqlite3VdbeAddOp2(v, OP_Goto, 0, iBeginBeforeTrigger);
sqlite3VdbeJumpHere(v, iEndBeforeTrigger);
}
if( !isView ){
/* Delete the row */
#ifndef SQLITE_OMIT_VIRTUALTABLE
if( IsVirtual(pTab) ){
const char *pVtab = (const char *)pTab->pVtab;
sqlite3VtabMakeWritable(pParse, pTab);
sqlite3VdbeAddOp4(v, OP_VUpdate, 0, 1, iRowid, pVtab, P4_VTAB);
}else
#endif
{
sqlite3GenerateRowDelete(pParse, pTab, iCur, iRowid, pParse->nested==0);
}
}
/* If there are row triggers, close all cursors then invoke
** the AFTER triggers
*/
if( triggers_exist ){
/* Jump back and run the AFTER triggers */
sqlite3VdbeAddOp2(v, OP_Goto, 0, iBeginAfterTrigger);
sqlite3VdbeJumpHere(v, iEndAfterTrigger);
}
/* End of the delete loop */
sqlite3VdbeAddOp2(v, OP_Goto, 0, addr);
sqlite3VdbeResolveLabel(v, end);
/* Close the cursors after the loop if there are no row triggers */
if( !isView && !IsVirtual(pTab) ){
for(i=1, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){
sqlite3VdbeAddOp2(v, OP_Close, iCur + i, pIdx->tnum);
}
sqlite3VdbeAddOp1(v, OP_Close, iCur);
}
}
/*
** Return the number of rows that were deleted. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( db->flags & SQLITE_CountRows && pParse->nested==0 && !pParse->trigStack ){
sqlite3VdbeAddOp2(v, OP_ResultRow, memCnt, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows deleted", SQLITE_STATIC);
}
delete_from_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprDelete(db, pWhere);
return;
}
/*
** Process a pragma statement.
**
** Pragmas are of this form:
**
** PRAGMA [database.]id [= value]
**
** The identifier might also be a string. The value is a string, and
** identifier, or a number. If minusFlag is true, then the value is
** a number that was preceded by a minus sign.
**
** If the left side is "database.id" then pId1 is the database name
** and pId2 is the id. If the left side is just "id" then pId1 is the
** id and pId2 is any empty string.
*/
void sqlite3Pragma(
Parse *pParse,
Token *pId1, /* First part of [database.]id field */
Token *pId2, /* Second part of [database.]id field, or NULL */
Token *pValue, /* Token for <value>, or NULL */
int minusFlag /* True if a '-' sign preceded <value> */
){
char *zLeft = 0; /* Nul-terminated UTF-8 string <id> */
char *zRight = 0; /* Nul-terminated UTF-8 string <value>, or NULL */
const char *zDb = 0; /* The database name */
Token *pId; /* Pointer to <id> token */
int iDb; /* Database index for <database> */
sqlite3 *db = pParse->db;
Db *pDb;
Vdbe *v = sqlite3GetVdbe(pParse);
if( v==0 ) return;
/* Interpret the [database.] part of the pragma statement. iDb is the
** index of the database this pragma is being applied to in db.aDb[]. */
iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId);
if( iDb<0 ) return;
pDb = &db->aDb[iDb];
zLeft = sqlite3NameFromToken(pId);
if( !zLeft ) return;
if( minusFlag ){
zRight = sqlite3MPrintf("-%T", pValue);
}else{
zRight = sqlite3NameFromToken(pValue);
}
zDb = ((iDb>0)?pDb->zName:0);
if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){
goto pragma_out;
}
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]default_cache_size
** PRAGMA [database.]default_cache_size=N
**
** The first form reports the current persistent setting for the
** page cache size. The value returned is the maximum number of
** pages in the page cache. The second form sets both the current
** page cache size value and the persistent page cache size value
** stored in the database file.
**
** The default cache size is stored in meta-value 2 of page 1 of the
** database file. The cache size is actually the absolute value of
** this memory location. The sign of meta-value 2 determines the
** synchronous setting. A negative value means synchronous is off
** and a positive value means synchronous is on.
*/
if( sqlite3StrICmp(zLeft,"default_cache_size")==0 ){
static const VdbeOpList getCacheSize[] = {
{ OP_ReadCookie, 0, 2, 0}, /* 0 */
{ OP_AbsValue, 0, 0, 0},
{ OP_Dup, 0, 0, 0},
{ OP_Integer, 0, 0, 0},
{ OP_Ne, 0, 6, 0},
{ OP_Integer, 0, 0, 0}, /* 5 */
{ OP_Callback, 1, 0, 0},
};
int addr;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", P3_STATIC);
addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+5, MAX_PAGES);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3VdbeAddOp(v, OP_Integer, size, 0);
sqlite3VdbeAddOp(v, OP_ReadCookie, iDb, 2);
addr = sqlite3VdbeAddOp(v, OP_Integer, 0, 0);
sqlite3VdbeAddOp(v, OP_Ge, 0, addr+3);
sqlite3VdbeAddOp(v, OP_Negative, 0, 0);
sqlite3VdbeAddOp(v, OP_SetCookie, iDb, 2);
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA [database.]page_size
** PRAGMA [database.]page_size=N
**
** The first form reports the current setting for the
** database page size in bytes. The second form sets the
** database page size value. The value can only be set if
** the database has not yet been created.
*/
if( sqlite3StrICmp(zLeft,"page_size")==0 ){
Btree *pBt = pDb->pBt;
if( !zRight ){
int size = pBt ? sqlite3BtreeGetPageSize(pBt) : 0;
returnSingleInt(pParse, "page_size", size);
}else{
sqlite3BtreeSetPageSize(pBt, atoi(zRight), -1);
}
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
/*
** PRAGMA [database.]auto_vacuum
** PRAGMA [database.]auto_vacuum=N
**
** Get or set the (boolean) value of the database 'auto-vacuum' parameter.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
if( sqlite3StrICmp(zLeft,"auto_vacuum")==0 ){
Btree *pBt = pDb->pBt;
if( !zRight ){
int auto_vacuum =
pBt ? sqlite3BtreeGetAutoVacuum(pBt) : SQLITE_DEFAULT_AUTOVACUUM;
returnSingleInt(pParse, "auto_vacuum", auto_vacuum);
}else{
sqlite3BtreeSetAutoVacuum(pBt, getBoolean(zRight));
}
}else
#endif
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]cache_size
** PRAGMA [database.]cache_size=N
**
** The first form reports the current local setting for the
** page cache size. The local setting can be different from
** the persistent cache size value that is stored in the database
** file itself. The value returned is the maximum number of
** pages in the page cache. The second form sets the local
** page cache size value. It does not change the persistent
** cache size stored on the disk so the cache size will revert
** to its default value when the database is closed and reopened.
** N should be a positive integer.
*/
if( sqlite3StrICmp(zLeft,"cache_size")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA temp_store
** PRAGMA temp_store = "default"|"memory"|"file"
**
** Return or set the local value of the temp_store flag. Changing
** the local value does not make changes to the disk file and the default
** value will be restored the next time the database is opened.
**
** Note that it is possible for the library compile-time options to
** override this setting
*/
if( sqlite3StrICmp(zLeft, "temp_store")==0 ){
if( !zRight ){
returnSingleInt(pParse, "temp_store", db->temp_store);
}else{
changeTempStorage(pParse, zRight);
}
}else
/*
** PRAGMA temp_store_directory
** PRAGMA temp_store_directory = ""|"directory_name"
**
** Return or set the local value of the temp_store_directory flag. Changing
** the value sets a specific directory to be used for temporary files.
** Setting to a null string reverts to the default temporary directory search.
** If temporary directory is changed, then invalidateTempStorage.
**
*/
if( sqlite3StrICmp(zLeft, "temp_store_directory")==0 ){
if( !zRight ){
if( sqlite3_temp_directory ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME,
"temp_store_directory", P3_STATIC);
sqlite3VdbeOp3(v, OP_String8, 0, 0, sqlite3_temp_directory, 0);
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
}
}else{
if( zRight[0] && !sqlite3OsIsDirWritable(zRight) ){
sqlite3ErrorMsg(pParse, "not a writable directory");
goto pragma_out;
}
if( TEMP_STORE==0
|| (TEMP_STORE==1 && db->temp_store<=1)
|| (TEMP_STORE==2 && db->temp_store==1)
){
invalidateTempStorage(pParse);
}
sqliteFree(sqlite3_temp_directory);
if( zRight[0] ){
sqlite3_temp_directory = zRight;
zRight = 0;
}else{
sqlite3_temp_directory = 0;
}
}
}else
/*
** PRAGMA [database.]synchronous
** PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL
**
** Return or set the local value of the synchronous flag. Changing
** the local value does not make changes to the disk file and the
** default value will be restored the next time the database is
** opened.
*/
if( sqlite3StrICmp(zLeft,"synchronous")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "synchronous", pDb->safety_level-1);
}else{
if( !db->autoCommit ){
sqlite3ErrorMsg(pParse,
"Safety level may not be changed inside a transaction");
}else{
pDb->safety_level = getSafetyLevel(zRight)+1;
}
}
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
#ifndef SQLITE_OMIT_FLAG_PRAGMAS
if( flagPragma(pParse, zLeft, zRight) ){
/* The flagPragma() subroutine also generates any necessary code
** there is nothing more to do here */
}else
#endif /* SQLITE_OMIT_FLAG_PRAGMAS */
#ifndef SQLITE_OMIT_SCHEMA_PRAGMAS
/*
** PRAGMA table_info(<table>)
**
** Return a single row for each column of the named table. The columns of
** the returned data set are:
**
** cid: Column id (numbered from left to right, starting at 0)
** name: Column name
** type: Column declaration type.
** notnull: True if 'NOT NULL' is part of column declaration
** dflt_value: The default value for the column, if any.
*/
if( sqlite3StrICmp(zLeft, "table_info")==0 && zRight ){
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
int i;
Column *pCol;
sqlite3VdbeSetNumCols(v, 6);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cid", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "type", P3_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "notnull", P3_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "dflt_value", P3_STATIC);
sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "pk", P3_STATIC);
sqlite3ViewGetColumnNames(pParse, pTab);
for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pCol->zName, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
pCol->zType ? pCol->zType : "numeric", 0);
sqlite3VdbeAddOp(v, OP_Integer, pCol->notNull, 0);
sqlite3ExprCode(pParse, pCol->pDflt);
sqlite3VdbeAddOp(v, OP_Integer, pCol->isPrimKey, 0);
sqlite3VdbeAddOp(v, OP_Callback, 6, 0);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_info")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pIdx = sqlite3FindIndex(db, zRight, zDb);
if( pIdx ){
int i;
pTab = pIdx->pTable;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seqno", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "cid", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "name", P3_STATIC);
for(i=0; i<pIdx->nColumn; i++){
int cnum = pIdx->aiColumn[i];
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeAddOp(v, OP_Integer, cnum, 0);
assert( pTab->nCol>cnum );
sqlite3VdbeOp3(v, OP_String8, 0, 0, pTab->aCol[cnum].zName, 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_list")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pIdx = pTab->pIndex;
if( pIdx ){
int i = 0;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "unique", P3_STATIC);
while(pIdx){
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pIdx->zName, 0);
sqlite3VdbeAddOp(v, OP_Integer, pIdx->onError!=OE_None, 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
++i;
pIdx = pIdx->pNext;
}
}
}
}else
if( sqlite3StrICmp(zLeft, "database_list")==0 ){
int i;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "file", P3_STATIC);
for(i=0; i<db->nDb; i++){
if( db->aDb[i].pBt==0 ) continue;
assert( db->aDb[i].zName!=0 );
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, db->aDb[i].zName, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
sqlite3BtreeGetFilename(db->aDb[i].pBt), 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
}
}else
if( sqlite3StrICmp(zLeft, "collation_list")==0 ){
int i = 0;
HashElem *p;
sqlite3VdbeSetNumCols(v, 2);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){
CollSeq *pColl = (CollSeq *)sqliteHashData(p);
sqlite3VdbeAddOp(v, OP_Integer, i++, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pColl->zName, 0);
sqlite3VdbeAddOp(v, OP_Callback, 2, 0);
}
}else
#endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */
#ifndef SQLITE_OMIT_FOREIGN_KEY
if( sqlite3StrICmp(zLeft, "foreign_key_list")==0 && zRight ){
FKey *pFK;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pFK = pTab->pFKey;
if( pFK ){
int i = 0;
sqlite3VdbeSetNumCols(v, 5);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "id", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "table", P3_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "from", P3_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "to", P3_STATIC);
while(pFK){
int j;
for(j=0; j<pFK->nCol; j++){
char *zCol = pFK->aCol[j].zCol;
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeAddOp(v, OP_Integer, j, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pFK->zTo, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
pTab->aCol[pFK->aCol[j].iFrom].zName, 0);
sqlite3VdbeOp3(v, zCol ? OP_String8 : OP_Null, 0, 0, zCol, 0);
sqlite3VdbeAddOp(v, OP_Callback, 5, 0);
}
++i;
pFK = pFK->pNextFrom;
}
}
}
}else
#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */
#ifndef NDEBUG
if( sqlite3StrICmp(zLeft, "parser_trace")==0 ){
extern void sqlite3ParserTrace(FILE*, char *);
if( zRight ){
if( getBoolean(zRight) ){
sqlite3ParserTrace(stderr, "parser: ");
}else{
sqlite3ParserTrace(0, 0);
}
}
}else
#endif
/* Reinstall the LIKE and GLOB functions. The variant of LIKE
** used will be case sensitive or not depending on the RHS.
*/
if( sqlite3StrICmp(zLeft, "case_sensitive_like")==0 ){
if( zRight ){
sqlite3RegisterLikeFunctions(db, getBoolean(zRight));
}
}else
#ifndef SQLITE_OMIT_INTEGRITY_CHECK
if( sqlite3StrICmp(zLeft, "integrity_check")==0 ){
int i, j, addr;
/* Code that appears at the end of the integrity check. If no error
** messages have been generated, output OK. Otherwise output the
** error message
*/
static const VdbeOpList endCode[] = {
{ OP_MemLoad, 0, 0, 0},
{ OP_Integer, 0, 0, 0},
{ OP_Ne, 0, 0, 0}, /* 2 */
{ OP_String8, 0, 0, "ok"},
{ OP_Callback, 1, 0, 0},
};
/* Initialize the VDBE program */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "integrity_check", P3_STATIC);
sqlite3VdbeAddOp(v, OP_MemInt, 0, 0); /* Initialize error count to 0 */
/* Do an integrity check on each database file */
for(i=0; i<db->nDb; i++){
HashElem *x;
Hash *pTbls;
int cnt = 0;
if( OMIT_TEMPDB && i==1 ) continue;
sqlite3CodeVerifySchema(pParse, i);
/* Do an integrity check of the B-Tree
*/
pTbls = &db->aDb[i].pSchema->tblHash;
for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
sqlite3VdbeAddOp(v, OP_Integer, pTab->tnum, 0);
cnt++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
sqlite3VdbeAddOp(v, OP_Integer, pIdx->tnum, 0);
cnt++;
}
}
assert( cnt>0 );
sqlite3VdbeAddOp(v, OP_IntegrityCk, cnt, i);
sqlite3VdbeAddOp(v, OP_Dup, 0, 1);
addr = sqlite3VdbeOp3(v, OP_String8, 0, 0, "ok", P3_STATIC);
sqlite3VdbeAddOp(v, OP_Eq, 0, addr+7);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
sqlite3MPrintf("*** in database %s ***\n", db->aDb[i].zName),
P3_DYNAMIC);
sqlite3VdbeAddOp(v, OP_Pull, 1, 0);
sqlite3VdbeAddOp(v, OP_Concat, 0, 1);
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
sqlite3VdbeAddOp(v, OP_MemIncr, 1, 0);
/* Make sure all the indices are constructed correctly.
*/
sqlite3CodeVerifySchema(pParse, i);
for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
int loopTop;
if( pTab->pIndex==0 ) continue;
sqlite3OpenTableAndIndices(pParse, pTab, 1, OP_OpenRead);
sqlite3VdbeAddOp(v, OP_MemInt, 0, 1);
loopTop = sqlite3VdbeAddOp(v, OP_Rewind, 1, 0);
sqlite3VdbeAddOp(v, OP_MemIncr, 1, 1);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int jmp2;
static const VdbeOpList idxErr[] = {
{ OP_MemIncr, 1, 0, 0},
{ OP_String8, 0, 0, "rowid "},
{ OP_Rowid, 1, 0, 0},
{ OP_String8, 0, 0, " missing from index "},
{ OP_String8, 0, 0, 0}, /* 4 */
{ OP_Concat, 2, 0, 0},
{ OP_Callback, 1, 0, 0},
};
sqlite3GenerateIndexKey(v, pIdx, 1);
jmp2 = sqlite3VdbeAddOp(v, OP_Found, j+2, 0);
addr = sqlite3VdbeAddOpList(v, ArraySize(idxErr), idxErr);
sqlite3VdbeChangeP3(v, addr+4, pIdx->zName, P3_STATIC);
sqlite3VdbeJumpHere(v, jmp2);
}
sqlite3VdbeAddOp(v, OP_Next, 1, loopTop+1);
sqlite3VdbeJumpHere(v, loopTop);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
static const VdbeOpList cntIdx[] = {
{ OP_MemInt, 0, 2, 0},
{ OP_Rewind, 0, 0, 0}, /* 1 */
{ OP_MemIncr, 1, 2, 0},
{ OP_Next, 0, 0, 0}, /* 3 */
{ OP_MemLoad, 1, 0, 0},
{ OP_MemLoad, 2, 0, 0},
{ OP_Eq, 0, 0, 0}, /* 6 */
{ OP_MemIncr, 1, 0, 0},
{ OP_String8, 0, 0, "wrong # of entries in index "},
{ OP_String8, 0, 0, 0}, /* 9 */
{ OP_Concat, 0, 0, 0},
{ OP_Callback, 1, 0, 0},
};
if( pIdx->tnum==0 ) continue;
addr = sqlite3VdbeAddOpList(v, ArraySize(cntIdx), cntIdx);
sqlite3VdbeChangeP1(v, addr+1, j+2);
sqlite3VdbeChangeP2(v, addr+1, addr+4);
sqlite3VdbeChangeP1(v, addr+3, j+2);
sqlite3VdbeChangeP2(v, addr+3, addr+2);
sqlite3VdbeJumpHere(v, addr+6);
sqlite3VdbeChangeP3(v, addr+9, pIdx->zName, P3_STATIC);
}
}
}
addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode);
sqlite3VdbeJumpHere(v, addr+2);
}else
#endif /* SQLITE_OMIT_INTEGRITY_CHECK */
#ifndef SQLITE_OMIT_UTF16
/*
** PRAGMA encoding
** PRAGMA encoding = "utf-8"|"utf-16"|"utf-16le"|"utf-16be"
**
** In it's first form, this pragma returns the encoding of the main
** database. If the database is not initialized, it is initialized now.
**
** The second form of this pragma is a no-op if the main database file
** has not already been initialized. In this case it sets the default
** encoding that will be used for the main database file if a new file
** is created. If an existing main database file is opened, then the
** default text encoding for the existing database is used.
**
** In all cases new databases created using the ATTACH command are
** created to use the same default text encoding as the main database. If
** the main database has not been initialized and/or created when ATTACH
** is executed, this is done before the ATTACH operation.
**
** In the second form this pragma sets the text encoding to be used in
** new database files created using this database handle. It is only
** useful if invoked immediately after the main database i
*/
if( sqlite3StrICmp(zLeft, "encoding")==0 ){
static struct EncName {
char *zName;
u8 enc;
} encnames[] = {
{ "UTF-8", SQLITE_UTF8 },
{ "UTF8", SQLITE_UTF8 },
{ "UTF-16le", SQLITE_UTF16LE },
{ "UTF16le", SQLITE_UTF16LE },
{ "UTF-16be", SQLITE_UTF16BE },
{ "UTF16be", SQLITE_UTF16BE },
{ "UTF-16", 0 /* Filled in at run-time */ },
{ "UTF16", 0 /* Filled in at run-time */ },
{ 0, 0 }
};
struct EncName *pEnc;
encnames[6].enc = encnames[7].enc = SQLITE_UTF16NATIVE;
if( !zRight ){ /* "PRAGMA encoding" */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "encoding", P3_STATIC);
sqlite3VdbeAddOp(v, OP_String8, 0, 0);
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( pEnc->enc==ENC(pParse->db) ){
sqlite3VdbeChangeP3(v, -1, pEnc->zName, P3_STATIC);
break;
}
}
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
}else{ /* "PRAGMA encoding = XXX" */
/* Only change the value of sqlite.enc if the database handle is not
** initialized. If the main database exists, the new sqlite.enc value
** will be overwritten when the schema is next loaded. If it does not
** already exists, it will be created to use the new encoding value.
*/
if(
!(DbHasProperty(db, 0, DB_SchemaLoaded)) ||
DbHasProperty(db, 0, DB_Empty)
){
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( 0==sqlite3StrICmp(zRight, pEnc->zName) ){
ENC(pParse->db) = pEnc->enc;
break;
}
}
if( !pEnc->zName ){
sqlite3ErrorMsg(pParse, "unsupported encoding: %s", zRight);
}
}
}
}else
#endif /* SQLITE_OMIT_UTF16 */
#ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
/*
** PRAGMA [database.]schema_version
** PRAGMA [database.]schema_version = <integer>
**
** PRAGMA [database.]user_version
** PRAGMA [database.]user_version = <integer>
**
** The pragma's schema_version and user_version are used to set or get
** the value of the schema-version and user-version, respectively. Both
** the schema-version and the user-version are 32-bit signed integers
** stored in the database header.
**
** The schema-cookie is usually only manipulated internally by SQLite. It
** is incremented by SQLite whenever the database schema is modified (by
** creating or dropping a table or index). The schema version is used by
** SQLite each time a query is executed to ensure that the internal cache
** of the schema used when compiling the SQL query matches the schema of
** the database against which the compiled query is actually executed.
** Subverting this mechanism by using "PRAGMA schema_version" to modify
** the schema-version is potentially dangerous and may lead to program
** crashes or database corruption. Use with caution!
**
** The user-version is not used internally by SQLite. It may be used by
** applications for any purpose.
*/
if( sqlite3StrICmp(zLeft, "schema_version")==0 ||
sqlite3StrICmp(zLeft, "user_version")==0 ){
int iCookie; /* Cookie index. 0 for schema-cookie, 6 for user-cookie. */
if( zLeft[0]=='s' || zLeft[0]=='S' ){
iCookie = 0;
}else{
iCookie = 5;
}
if( zRight ){
/* Write the specified cookie value */
static const VdbeOpList setCookie[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
{ OP_Integer, 0, 0, 0}, /* 1 */
{ OP_SetCookie, 0, 0, 0}, /* 2 */
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+1, atoi(zRight));
sqlite3VdbeChangeP1(v, addr+2, iDb);
sqlite3VdbeChangeP2(v, addr+2, iCookie);
}else{
/* Read the specified cookie value */
static const VdbeOpList readCookie[] = {
{ OP_ReadCookie, 0, 0, 0}, /* 0 */
{ OP_Callback, 1, 0, 0}
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(readCookie), readCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP2(v, addr, iCookie);
sqlite3VdbeSetNumCols(v, 1);
}
}
#endif /* SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS */
#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
/*
** Report the current state of file logs for all databases
*/
if( sqlite3StrICmp(zLeft, "lock_status")==0 ){
static const char *const azLockName[] = {
"unlocked", "shared", "reserved", "pending", "exclusive"
};
int i;
Vdbe *v = sqlite3GetVdbe(pParse);
sqlite3VdbeSetNumCols(v, 2);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "database", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "status", P3_STATIC);
for(i=0; i<db->nDb; i++){
Btree *pBt;
Pager *pPager;
if( db->aDb[i].zName==0 ) continue;
sqlite3VdbeOp3(v, OP_String8, 0, 0, db->aDb[i].zName, P3_STATIC);
pBt = db->aDb[i].pBt;
if( pBt==0 || (pPager = sqlite3BtreePager(pBt))==0 ){
sqlite3VdbeOp3(v, OP_String8, 0, 0, "closed", P3_STATIC);
}else{
int j = sqlite3pager_lockstate(pPager);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
(j>=0 && j<=4) ? azLockName[j] : "unknown", P3_STATIC);
}
sqlite3VdbeAddOp(v, OP_Callback, 2, 0);
}
}else
#endif
#ifdef SQLITE_SSE
/*
** Check to see if the sqlite_statements table exists. Create it
** if it does not.
*/
if( sqlite3StrICmp(zLeft, "create_sqlite_statement_table")==0 ){
extern int sqlite3CreateStatementsTable(Parse*);
sqlite3CreateStatementsTable(pParse);
}else
#endif
#if SQLITE_HAS_CODEC
if( sqlite3StrICmp(zLeft, "key")==0 ){
sqlite3_key(db, zRight, strlen(zRight));
}else
#endif
{}
if( v ){
/* Code an OP_Expire at the end of each PRAGMA program to cause
** the VDBE implementing the pragma to expire. Most (all?) pragmas
** are only valid for a single execution.
*/
sqlite3VdbeAddOp(v, OP_Expire, 1, 0);
/*
** Reset the safety level, in case the fullfsync flag or synchronous
** setting changed.
*/
if( db->autoCommit ){
sqlite3BtreeSetSafetyLevel(pDb->pBt, pDb->safety_level,
(db->flags&SQLITE_FullFSync)!=0);
}
}
pragma_out:
sqliteFree(zLeft);
sqliteFree(zRight);
}
/*
** Process a pragma statement.
**
** Pragmas are of this form:
**
** PRAGMA [database.]id [= value]
**
** The identifier might also be a string. The value is a string, and
** identifier, or a number. If minusFlag is true, then the value is
** a number that was preceded by a minus sign.
**
** If the left side is "database.id" then pId1 is the database name
** and pId2 is the id. If the left side is just "id" then pId1 is the
** id and pId2 is any empty string.
*/
void sqlite3Pragma(
Parse *pParse,
Token *pId1, /* First part of [database.]id field */
Token *pId2, /* Second part of [database.]id field, or NULL */
Token *pValue, /* Token for <value>, or NULL */
int minusFlag /* True if a '-' sign preceded <value> */
){
char *zLeft = 0; /* Nul-terminated UTF-8 string <id> */
char *zRight = 0; /* Nul-terminated UTF-8 string <value>, or NULL */
const char *zDb = 0; /* The database name */
Token *pId; /* Pointer to <id> token */
int iDb; /* Database index for <database> */
sqlite3 *db = pParse->db;
Db *pDb;
Vdbe *v = pParse->pVdbe = sqlite3VdbeCreate(db);
if( v==0 ) return;
pParse->nMem = 2;
/* Interpret the [database.] part of the pragma statement. iDb is the
** index of the database this pragma is being applied to in db.aDb[]. */
iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId);
if( iDb<0 ) return;
pDb = &db->aDb[iDb];
/* If the temp database has been explicitly named as part of the
** pragma, make sure it is open.
*/
if( iDb==1 && sqlite3OpenTempDatabase(pParse) ){
return;
}
zLeft = sqlite3NameFromToken(db, pId);
if( !zLeft ) return;
if( minusFlag ){
zRight = sqlite3MPrintf(db, "-%T", pValue);
}else{
zRight = sqlite3NameFromToken(db, pValue);
}
zDb = ((pId2 && pId2->n>0)?pDb->zName:0);
if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){
goto pragma_out;
}
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]default_cache_size
** PRAGMA [database.]default_cache_size=N
**
** The first form reports the current persistent setting for the
** page cache size. The value returned is the maximum number of
** pages in the page cache. The second form sets both the current
** page cache size value and the persistent page cache size value
** stored in the database file.
**
** The default cache size is stored in meta-value 2 of page 1 of the
** database file. The cache size is actually the absolute value of
** this memory location. The sign of meta-value 2 determines the
** synchronous setting. A negative value means synchronous is off
** and a positive value means synchronous is on.
*/
if( sqlite3StrICmp(zLeft,"default_cache_size")==0 ){
static const VdbeOpList getCacheSize[] = {
{ OP_ReadCookie, 0, 1, 2}, /* 0 */
{ OP_IfPos, 1, 6, 0},
{ OP_Integer, 0, 2, 0},
{ OP_Subtract, 1, 2, 1},
{ OP_IfPos, 1, 6, 0},
{ OP_Integer, 0, 1, 0}, /* 5 */
{ OP_ResultRow, 1, 1, 0},
};
int addr;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeUsesBtree(v, iDb);
if( !zRight ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", P4_STATIC);
pParse->nMem += 2;
addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+5, SQLITE_DEFAULT_CACHE_SIZE);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3VdbeAddOp2(v, OP_Integer, size, 1);
sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, 2, 2);
addr = sqlite3VdbeAddOp2(v, OP_IfPos, 2, 0);
sqlite3VdbeAddOp2(v, OP_Integer, -size, 1);
sqlite3VdbeJumpHere(v, addr);
sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, 2, 1);
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA [database.]page_size
** PRAGMA [database.]page_size=N
**
** The first form reports the current setting for the
** database page size in bytes. The second form sets the
** database page size value. The value can only be set if
** the database has not yet been created.
*/
if( sqlite3StrICmp(zLeft,"page_size")==0 ){
Btree *pBt = pDb->pBt;
if( !zRight ){
int size = pBt ? sqlite3BtreeGetPageSize(pBt) : 0;
returnSingleInt(pParse, "page_size", size);
}else{
/* Malloc may fail when setting the page-size, as there is an internal
** buffer that the pager module resizes using sqlite3_realloc().
*/
db->nextPagesize = atoi(zRight);
if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize, -1) ){
db->mallocFailed = 1;
}
}
}else
/*
** PRAGMA [database.]max_page_count
** PRAGMA [database.]max_page_count=N
**
** The first form reports the current setting for the
** maximum number of pages in the database file. The
** second form attempts to change this setting. Both
** forms return the current setting.
*/
if( sqlite3StrICmp(zLeft,"max_page_count")==0 ){
Btree *pBt = pDb->pBt;
int newMax = 0;
if( zRight ){
newMax = atoi(zRight);
}
if( pBt ){
newMax = sqlite3BtreeMaxPageCount(pBt, newMax);
}
returnSingleInt(pParse, "max_page_count", newMax);
}else
/*
** PRAGMA [database.]page_count
**
** Return the number of pages in the specified database.
*/
if( sqlite3StrICmp(zLeft,"page_count")==0 ){
Vdbe *v;
int iReg;
v = sqlite3GetVdbe(pParse);
if( !v || sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3CodeVerifySchema(pParse, iDb);
iReg = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Pagecount, iDb, iReg);
sqlite3VdbeAddOp2(v, OP_ResultRow, iReg, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "page_count", P4_STATIC);
}else
/*
** PRAGMA [database.]locking_mode
** PRAGMA [database.]locking_mode = (normal|exclusive)
*/
if( sqlite3StrICmp(zLeft,"locking_mode")==0 ){
const char *zRet = "normal";
int eMode = getLockingMode(zRight);
if( pId2->n==0 && eMode==PAGER_LOCKINGMODE_QUERY ){
/* Simple "PRAGMA locking_mode;" statement. This is a query for
** the current default locking mode (which may be different to
** the locking-mode of the main database).
*/
eMode = db->dfltLockMode;
}else{
Pager *pPager;
if( pId2->n==0 ){
/* This indicates that no database name was specified as part
** of the PRAGMA command. In this case the locking-mode must be
** set on all attached databases, as well as the main db file.
**
** Also, the sqlite3.dfltLockMode variable is set so that
** any subsequently attached databases also use the specified
** locking mode.
*/
int ii;
assert(pDb==&db->aDb[0]);
for(ii=2; ii<db->nDb; ii++){
pPager = sqlite3BtreePager(db->aDb[ii].pBt);
sqlite3PagerLockingMode(pPager, eMode);
}
db->dfltLockMode = eMode;
}
pPager = sqlite3BtreePager(pDb->pBt);
eMode = sqlite3PagerLockingMode(pPager, eMode);
}
assert(eMode==PAGER_LOCKINGMODE_NORMAL||eMode==PAGER_LOCKINGMODE_EXCLUSIVE);
if( eMode==PAGER_LOCKINGMODE_EXCLUSIVE ){
zRet = "exclusive";
}
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "locking_mode", P4_STATIC);
sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, zRet, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}else
/*
** PRAGMA [database.]journal_mode
** PRAGMA [database.]journal_mode = (delete|persist|off)
*/
if( sqlite3StrICmp(zLeft,"journal_mode")==0 ){
int eMode;
static char * const azModeName[] = {"delete", "persist", "off", "truncate"};
if( zRight==0 ){
eMode = PAGER_JOURNALMODE_QUERY;
}else{
int n = strlen(zRight);
eMode = sizeof(azModeName)/sizeof(azModeName[0]) - 1;
while( eMode>=0 && sqlite3StrNICmp(zRight, azModeName[eMode], n)!=0 ){
eMode--;
}
}
if( pId2->n==0 && eMode==PAGER_JOURNALMODE_QUERY ){
/* Simple "PRAGMA journal_mode;" statement. This is a query for
** the current default journal mode (which may be different to
** the journal-mode of the main database).
*/
eMode = db->dfltJournalMode;
}else{
Pager *pPager;
if( pId2->n==0 ){
/* This indicates that no database name was specified as part
** of the PRAGMA command. In this case the journal-mode must be
** set on all attached databases, as well as the main db file.
**
** Also, the sqlite3.dfltJournalMode variable is set so that
** any subsequently attached databases also use the specified
** journal mode.
*/
int ii;
assert(pDb==&db->aDb[0]);
for(ii=1; ii<db->nDb; ii++){
if( db->aDb[ii].pBt ){
pPager = sqlite3BtreePager(db->aDb[ii].pBt);
sqlite3PagerJournalMode(pPager, eMode);
}
}
db->dfltJournalMode = eMode;
}
pPager = sqlite3BtreePager(pDb->pBt);
eMode = sqlite3PagerJournalMode(pPager, eMode);
}
assert( eMode==PAGER_JOURNALMODE_DELETE
|| eMode==PAGER_JOURNALMODE_TRUNCATE
|| eMode==PAGER_JOURNALMODE_PERSIST
|| eMode==PAGER_JOURNALMODE_OFF );
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "journal_mode", P4_STATIC);
sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0,
azModeName[eMode], P4_STATIC);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}else
/*
** PRAGMA [database.]journal_size_limit
** PRAGMA [database.]journal_size_limit=N
**
** Get or set the (boolean) value of the database 'auto-vacuum' parameter.
*/
if( sqlite3StrICmp(zLeft,"journal_size_limit")==0 ){
Pager *pPager = sqlite3BtreePager(pDb->pBt);
i64 iLimit = -2;
if( zRight ){
int iLimit32 = atoi(zRight);
if( iLimit32<-1 ){
iLimit32 = -1;
}
iLimit = iLimit32;
}
iLimit = sqlite3PagerJournalSizeLimit(pPager, iLimit);
returnSingleInt(pParse, "journal_size_limit", (int)iLimit);
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
/*
** PRAGMA [database.]auto_vacuum
** PRAGMA [database.]auto_vacuum=N
**
** Get or set the (boolean) value of the database 'auto-vacuum' parameter.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
if( sqlite3StrICmp(zLeft,"auto_vacuum")==0 ){
Btree *pBt = pDb->pBt;
if( sqlite3ReadSchema(pParse) ){
goto pragma_out;
}
if( !zRight ){
int auto_vacuum =
pBt ? sqlite3BtreeGetAutoVacuum(pBt) : SQLITE_DEFAULT_AUTOVACUUM;
returnSingleInt(pParse, "auto_vacuum", auto_vacuum);
}else{
int eAuto = getAutoVacuum(zRight);
db->nextAutovac = eAuto;
if( eAuto>=0 ){
/* Call SetAutoVacuum() to set initialize the internal auto and
** incr-vacuum flags. This is required in case this connection
** creates the database file. It is important that it is created
** as an auto-vacuum capable db.
*/
int rc = sqlite3BtreeSetAutoVacuum(pBt, eAuto);
if( rc==SQLITE_OK && (eAuto==1 || eAuto==2) ){
/* When setting the auto_vacuum mode to either "full" or
** "incremental", write the value of meta[6] in the database
** file. Before writing to meta[6], check that meta[3] indicates
** that this really is an auto-vacuum capable database.
*/
static const VdbeOpList setMeta6[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
{ OP_ReadCookie, 0, 1, 3}, /* 1 */
{ OP_If, 1, 0, 0}, /* 2 */
{ OP_Halt, SQLITE_OK, OE_Abort, 0}, /* 3 */
{ OP_Integer, 0, 1, 0}, /* 4 */
{ OP_SetCookie, 0, 6, 1}, /* 5 */
};
int iAddr;
iAddr = sqlite3VdbeAddOpList(v, ArraySize(setMeta6), setMeta6);
sqlite3VdbeChangeP1(v, iAddr, iDb);
sqlite3VdbeChangeP1(v, iAddr+1, iDb);
sqlite3VdbeChangeP2(v, iAddr+2, iAddr+4);
sqlite3VdbeChangeP1(v, iAddr+4, eAuto-1);
sqlite3VdbeChangeP1(v, iAddr+5, iDb);
sqlite3VdbeUsesBtree(v, iDb);
}
}
}
}else
#endif
/*
** PRAGMA [database.]incremental_vacuum(N)
**
** Do N steps of incremental vacuuming on a database.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
if( sqlite3StrICmp(zLeft,"incremental_vacuum")==0 ){
int iLimit, addr;
if( sqlite3ReadSchema(pParse) ){
goto pragma_out;
}
if( zRight==0 || !sqlite3GetInt32(zRight, &iLimit) || iLimit<=0 ){
iLimit = 0x7fffffff;
}
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3VdbeAddOp2(v, OP_Integer, iLimit, 1);
addr = sqlite3VdbeAddOp1(v, OP_IncrVacuum, iDb);
sqlite3VdbeAddOp1(v, OP_ResultRow, 1);
sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1);
sqlite3VdbeAddOp2(v, OP_IfPos, 1, addr);
sqlite3VdbeJumpHere(v, addr);
}else
#endif
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]cache_size
** PRAGMA [database.]cache_size=N
**
** The first form reports the current local setting for the
** page cache size. The local setting can be different from
** the persistent cache size value that is stored in the database
** file itself. The value returned is the maximum number of
** pages in the page cache. The second form sets the local
** page cache size value. It does not change the persistent
** cache size stored on the disk so the cache size will revert
** to its default value when the database is closed and reopened.
** N should be a positive integer.
*/
if( sqlite3StrICmp(zLeft,"cache_size")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA temp_store
** PRAGMA temp_store = "default"|"memory"|"file"
**
** Return or set the local value of the temp_store flag. Changing
** the local value does not make changes to the disk file and the default
** value will be restored the next time the database is opened.
**
** Note that it is possible for the library compile-time options to
** override this setting
*/
if( sqlite3StrICmp(zLeft, "temp_store")==0 ){
if( !zRight ){
returnSingleInt(pParse, "temp_store", db->temp_store);
}else{
changeTempStorage(pParse, zRight);
}
}else
/*
** PRAGMA temp_store_directory
** PRAGMA temp_store_directory = ""|"directory_name"
**
** Return or set the local value of the temp_store_directory flag. Changing
** the value sets a specific directory to be used for temporary files.
** Setting to a null string reverts to the default temporary directory search.
** If temporary directory is changed, then invalidateTempStorage.
**
*/
if( sqlite3StrICmp(zLeft, "temp_store_directory")==0 ){
if( !zRight ){
if( sqlite3_temp_directory ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME,
"temp_store_directory", P4_STATIC);
sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, sqlite3_temp_directory, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}
}else{
#ifndef SQLITE_OMIT_WSD
if( zRight[0] ){
int rc;
int res;
rc = sqlite3OsAccess(db->pVfs, zRight, SQLITE_ACCESS_READWRITE, &res);
if( rc!=SQLITE_OK || res==0 ){
sqlite3ErrorMsg(pParse, "not a writable directory");
goto pragma_out;
}
}
if( SQLITE_TEMP_STORE==0
|| (SQLITE_TEMP_STORE==1 && db->temp_store<=1)
|| (SQLITE_TEMP_STORE==2 && db->temp_store==1)
){
invalidateTempStorage(pParse);
}
sqlite3_free(sqlite3_temp_directory);
if( zRight[0] ){
sqlite3_temp_directory = sqlite3DbStrDup(0, zRight);
}else{
sqlite3_temp_directory = 0;
}
#endif /* SQLITE_OMIT_WSD */
}
}else
/*
** PRAGMA [database.]synchronous
** PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL
**
** Return or set the local value of the synchronous flag. Changing
** the local value does not make changes to the disk file and the
** default value will be restored the next time the database is
** opened.
*/
if( sqlite3StrICmp(zLeft,"synchronous")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "synchronous", pDb->safety_level-1);
}else{
if( !db->autoCommit ){
sqlite3ErrorMsg(pParse,
"Safety level may not be changed inside a transaction");
}else{
pDb->safety_level = getSafetyLevel(zRight)+1;
}
}
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
#ifndef SQLITE_OMIT_FLAG_PRAGMAS
if( flagPragma(pParse, zLeft, zRight) ){
/* The flagPragma() subroutine also generates any necessary code
** there is nothing more to do here */
}else
#endif /* SQLITE_OMIT_FLAG_PRAGMAS */
#ifndef SQLITE_OMIT_SCHEMA_PRAGMAS
/*
** PRAGMA table_info(<table>)
**
** Return a single row for each column of the named table. The columns of
** the returned data set are:
**
** cid: Column id (numbered from left to right, starting at 0)
** name: Column name
** type: Column declaration type.
** notnull: True if 'NOT NULL' is part of column declaration
** dflt_value: The default value for the column, if any.
*/
if( sqlite3StrICmp(zLeft, "table_info")==0 && zRight ){
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
int i;
int nHidden = 0;
Column *pCol;
sqlite3VdbeSetNumCols(v, 6);
pParse->nMem = 6;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cid", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "type", P4_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "notnull", P4_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "dflt_value", P4_STATIC);
sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "pk", P4_STATIC);
sqlite3ViewGetColumnNames(pParse, pTab);
for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
const Token *pDflt;
if( IsHiddenColumn(pCol) ){
nHidden++;
continue;
}
sqlite3VdbeAddOp2(v, OP_Integer, i-nHidden, 1);
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pCol->zName, 0);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
pCol->zType ? pCol->zType : "", 0);
sqlite3VdbeAddOp2(v, OP_Integer, pCol->notNull, 4);
if( pCol->pDflt && (pDflt = &pCol->pDflt->span)->z ){
sqlite3VdbeAddOp4(v, OP_String8, 0, 5, 0, (char*)pDflt->z, pDflt->n);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, 5);
}
sqlite3VdbeAddOp2(v, OP_Integer, pCol->isPrimKey, 6);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 6);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_info")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pIdx = sqlite3FindIndex(db, zRight, zDb);
if( pIdx ){
int i;
pTab = pIdx->pTable;
sqlite3VdbeSetNumCols(v, 3);
pParse->nMem = 3;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seqno", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "cid", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "name", P4_STATIC);
for(i=0; i<pIdx->nColumn; i++){
int cnum = pIdx->aiColumn[i];
sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
sqlite3VdbeAddOp2(v, OP_Integer, cnum, 2);
assert( pTab->nCol>cnum );
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pTab->aCol[cnum].zName, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_list")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pIdx = pTab->pIndex;
if( pIdx ){
int i = 0;
sqlite3VdbeSetNumCols(v, 3);
pParse->nMem = 3;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "unique", P4_STATIC);
while(pIdx){
sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0);
sqlite3VdbeAddOp2(v, OP_Integer, pIdx->onError!=OE_None, 3);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
++i;
pIdx = pIdx->pNext;
}
}
}
}else
if( sqlite3StrICmp(zLeft, "database_list")==0 ){
int i;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 3);
pParse->nMem = 3;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "file", P4_STATIC);
for(i=0; i<db->nDb; i++){
if( db->aDb[i].pBt==0 ) continue;
assert( db->aDb[i].zName!=0 );
sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, db->aDb[i].zName, 0);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
sqlite3BtreeGetFilename(db->aDb[i].pBt), 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
}
}else
if( sqlite3StrICmp(zLeft, "collation_list")==0 ){
int i = 0;
HashElem *p;
sqlite3VdbeSetNumCols(v, 2);
pParse->nMem = 2;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P4_STATIC);
for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){
CollSeq *pColl = (CollSeq *)sqliteHashData(p);
sqlite3VdbeAddOp2(v, OP_Integer, i++, 1);
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pColl->zName, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2);
}
}else
#endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */
#ifndef SQLITE_OMIT_FOREIGN_KEY
if( sqlite3StrICmp(zLeft, "foreign_key_list")==0 && zRight ){
FKey *pFK;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pFK = pTab->pFKey;
if( pFK ){
int i = 0;
sqlite3VdbeSetNumCols(v, 5);
pParse->nMem = 5;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "id", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "seq", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "table", P4_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "from", P4_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "to", P4_STATIC);
while(pFK){
int j;
for(j=0; j<pFK->nCol; j++){
char *zCol = pFK->aCol[j].zCol;
sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
sqlite3VdbeAddOp2(v, OP_Integer, j, 2);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pFK->zTo, 0);
sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0,
pTab->aCol[pFK->aCol[j].iFrom].zName, 0);
sqlite3VdbeAddOp4(v, zCol ? OP_String8 : OP_Null, 0, 5, 0, zCol, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 5);
}
++i;
pFK = pFK->pNextFrom;
}
}
}
}else
#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */
#ifndef NDEBUG
if( sqlite3StrICmp(zLeft, "parser_trace")==0 ){
if( zRight ){
if( getBoolean(zRight) ){
sqlite3ParserTrace(stderr, "parser: ");
}else{
sqlite3ParserTrace(0, 0);
}
}
}else
#endif
/* Reinstall the LIKE and GLOB functions. The variant of LIKE
** used will be case sensitive or not depending on the RHS.
*/
if( sqlite3StrICmp(zLeft, "case_sensitive_like")==0 ){
if( zRight ){
sqlite3RegisterLikeFunctions(db, getBoolean(zRight));
}
}else
#ifndef SQLITE_INTEGRITY_CHECK_ERROR_MAX
# define SQLITE_INTEGRITY_CHECK_ERROR_MAX 100
#endif
#ifndef SQLITE_OMIT_INTEGRITY_CHECK
/* Pragma "quick_check" is an experimental reduced version of
** integrity_check designed to detect most database corruption
** without most of the overhead of a full integrity-check.
*/
if( sqlite3StrICmp(zLeft, "integrity_check")==0
|| sqlite3StrICmp(zLeft, "quick_check")==0
){
int i, j, addr, mxErr;
/* Code that appears at the end of the integrity check. If no error
** messages have been generated, output OK. Otherwise output the
** error message
*/
static const VdbeOpList endCode[] = {
{ OP_AddImm, 1, 0, 0}, /* 0 */
{ OP_IfNeg, 1, 0, 0}, /* 1 */
{ OP_String8, 0, 3, 0}, /* 2 */
{ OP_ResultRow, 3, 1, 0},
};
int isQuick = (zLeft[0]=='q');
/* Initialize the VDBE program */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pParse->nMem = 6;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "integrity_check", P4_STATIC);
/* Set the maximum error count */
mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX;
if( zRight ){
mxErr = atoi(zRight);
if( mxErr<=0 ){
mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX;
}
}
sqlite3VdbeAddOp2(v, OP_Integer, mxErr, 1); /* reg[1] holds errors left */
/* Do an integrity check on each database file */
for(i=0; i<db->nDb; i++){
HashElem *x;
Hash *pTbls;
int cnt = 0;
if( OMIT_TEMPDB && i==1 ) continue;
sqlite3CodeVerifySchema(pParse, i);
addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Halt if out of errors */
sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
/* Do an integrity check of the B-Tree
**
** Begin by filling registers 2, 3, ... with the root pages numbers
** for all tables and indices in the database.
*/
pTbls = &db->aDb[i].pSchema->tblHash;
for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
sqlite3VdbeAddOp2(v, OP_Integer, pTab->tnum, 2+cnt);
cnt++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
sqlite3VdbeAddOp2(v, OP_Integer, pIdx->tnum, 2+cnt);
cnt++;
}
}
if( cnt==0 ) continue;
/* Make sure sufficient number of registers have been allocated */
if( pParse->nMem < cnt+4 ){
pParse->nMem = cnt+4;
}
/* Do the b-tree integrity checks */
sqlite3VdbeAddOp3(v, OP_IntegrityCk, 2, cnt, 1);
sqlite3VdbeChangeP5(v, i);
addr = sqlite3VdbeAddOp1(v, OP_IsNull, 2);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName),
P4_DYNAMIC);
sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1);
sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2);
sqlite3VdbeAddOp2(v, OP_ResultRow, 2, 1);
sqlite3VdbeJumpHere(v, addr);
/* Make sure all the indices are constructed correctly.
*/
for(x=sqliteHashFirst(pTbls); x && !isQuick; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
int loopTop;
if( pTab->pIndex==0 ) continue;
addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Stop if out of errors */
sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
sqlite3OpenTableAndIndices(pParse, pTab, 1, OP_OpenRead);
sqlite3VdbeAddOp2(v, OP_Integer, 0, 2); /* reg(2) will count entries */
loopTop = sqlite3VdbeAddOp2(v, OP_Rewind, 1, 0);
sqlite3VdbeAddOp2(v, OP_AddImm, 2, 1); /* increment entry count */
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int jmp2;
static const VdbeOpList idxErr[] = {
{ OP_AddImm, 1, -1, 0},
{ OP_String8, 0, 3, 0}, /* 1 */
{ OP_Rowid, 1, 4, 0},
{ OP_String8, 0, 5, 0}, /* 3 */
{ OP_String8, 0, 6, 0}, /* 4 */
{ OP_Concat, 4, 3, 3},
{ OP_Concat, 5, 3, 3},
{ OP_Concat, 6, 3, 3},
{ OP_ResultRow, 3, 1, 0},
{ OP_IfPos, 1, 0, 0}, /* 9 */
{ OP_Halt, 0, 0, 0},
};
sqlite3GenerateIndexKey(pParse, pIdx, 1, 3, 1);
jmp2 = sqlite3VdbeAddOp3(v, OP_Found, j+2, 0, 3);
addr = sqlite3VdbeAddOpList(v, ArraySize(idxErr), idxErr);
sqlite3VdbeChangeP4(v, addr+1, "rowid ", P4_STATIC);
sqlite3VdbeChangeP4(v, addr+3, " missing from index ", P4_STATIC);
sqlite3VdbeChangeP4(v, addr+4, pIdx->zName, P4_STATIC);
sqlite3VdbeJumpHere(v, addr+9);
sqlite3VdbeJumpHere(v, jmp2);
}
sqlite3VdbeAddOp2(v, OP_Next, 1, loopTop+1);
sqlite3VdbeJumpHere(v, loopTop);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
static const VdbeOpList cntIdx[] = {
{ OP_Integer, 0, 3, 0},
{ OP_Rewind, 0, 0, 0}, /* 1 */
{ OP_AddImm, 3, 1, 0},
{ OP_Next, 0, 0, 0}, /* 3 */
{ OP_Eq, 2, 0, 3}, /* 4 */
{ OP_AddImm, 1, -1, 0},
{ OP_String8, 0, 2, 0}, /* 6 */
{ OP_String8, 0, 3, 0}, /* 7 */
{ OP_Concat, 3, 2, 2},
{ OP_ResultRow, 2, 1, 0},
};
if( pIdx->tnum==0 ) continue;
addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1);
sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
addr = sqlite3VdbeAddOpList(v, ArraySize(cntIdx), cntIdx);
sqlite3VdbeChangeP1(v, addr+1, j+2);
sqlite3VdbeChangeP2(v, addr+1, addr+4);
sqlite3VdbeChangeP1(v, addr+3, j+2);
sqlite3VdbeChangeP2(v, addr+3, addr+2);
sqlite3VdbeJumpHere(v, addr+4);
sqlite3VdbeChangeP4(v, addr+6,
"wrong # of entries in index ", P4_STATIC);
sqlite3VdbeChangeP4(v, addr+7, pIdx->zName, P4_STATIC);
}
}
}
addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode);
sqlite3VdbeChangeP2(v, addr, -mxErr);
sqlite3VdbeJumpHere(v, addr+1);
sqlite3VdbeChangeP4(v, addr+2, "ok", P4_STATIC);
}else
#endif /* SQLITE_OMIT_INTEGRITY_CHECK */
#ifndef SQLITE_OMIT_UTF16
/*
** PRAGMA encoding
** PRAGMA encoding = "utf-8"|"utf-16"|"utf-16le"|"utf-16be"
**
** In its first form, this pragma returns the encoding of the main
** database. If the database is not initialized, it is initialized now.
**
** The second form of this pragma is a no-op if the main database file
** has not already been initialized. In this case it sets the default
** encoding that will be used for the main database file if a new file
** is created. If an existing main database file is opened, then the
** default text encoding for the existing database is used.
**
** In all cases new databases created using the ATTACH command are
** created to use the same default text encoding as the main database. If
** the main database has not been initialized and/or created when ATTACH
** is executed, this is done before the ATTACH operation.
**
** In the second form this pragma sets the text encoding to be used in
** new database files created using this database handle. It is only
** useful if invoked immediately after the main database i
*/
if( sqlite3StrICmp(zLeft, "encoding")==0 ){
static const struct EncName {
char *zName;
u8 enc;
} encnames[] = {
{ "UTF-8", SQLITE_UTF8 },
{ "UTF8", SQLITE_UTF8 },
{ "UTF-16le", SQLITE_UTF16LE },
{ "UTF16le", SQLITE_UTF16LE },
{ "UTF-16be", SQLITE_UTF16BE },
{ "UTF16be", SQLITE_UTF16BE },
{ "UTF-16", 0 }, /* SQLITE_UTF16NATIVE */
{ "UTF16", 0 }, /* SQLITE_UTF16NATIVE */
{ 0, 0 }
};
const struct EncName *pEnc;
if( !zRight ){ /* "PRAGMA encoding" */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "encoding", P4_STATIC);
sqlite3VdbeAddOp2(v, OP_String8, 0, 1);
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( pEnc->enc==ENC(pParse->db) ){
sqlite3VdbeChangeP4(v, -1, pEnc->zName, P4_STATIC);
break;
}
}
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}else{ /* "PRAGMA encoding = XXX" */
/* Only change the value of sqlite.enc if the database handle is not
** initialized. If the main database exists, the new sqlite.enc value
** will be overwritten when the schema is next loaded. If it does not
** already exists, it will be created to use the new encoding value.
*/
if(
!(DbHasProperty(db, 0, DB_SchemaLoaded)) ||
DbHasProperty(db, 0, DB_Empty)
){
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( 0==sqlite3StrICmp(zRight, pEnc->zName) ){
ENC(pParse->db) = pEnc->enc ? pEnc->enc : SQLITE_UTF16NATIVE;
break;
}
}
if( !pEnc->zName ){
sqlite3ErrorMsg(pParse, "unsupported encoding: %s", zRight);
}
}
}
}else
#endif /* SQLITE_OMIT_UTF16 */
#ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
/*
** PRAGMA [database.]schema_version
** PRAGMA [database.]schema_version = <integer>
**
** PRAGMA [database.]user_version
** PRAGMA [database.]user_version = <integer>
**
** The pragma's schema_version and user_version are used to set or get
** the value of the schema-version and user-version, respectively. Both
** the schema-version and the user-version are 32-bit signed integers
** stored in the database header.
**
** The schema-cookie is usually only manipulated internally by SQLite. It
** is incremented by SQLite whenever the database schema is modified (by
** creating or dropping a table or index). The schema version is used by
** SQLite each time a query is executed to ensure that the internal cache
** of the schema used when compiling the SQL query matches the schema of
** the database against which the compiled query is actually executed.
** Subverting this mechanism by using "PRAGMA schema_version" to modify
** the schema-version is potentially dangerous and may lead to program
** crashes or database corruption. Use with caution!
**
** The user-version is not used internally by SQLite. It may be used by
** applications for any purpose.
*/
if( sqlite3StrICmp(zLeft, "schema_version")==0
|| sqlite3StrICmp(zLeft, "user_version")==0
|| sqlite3StrICmp(zLeft, "freelist_count")==0
){
int iCookie; /* Cookie index. 0 for schema-cookie, 6 for user-cookie. */
sqlite3VdbeUsesBtree(v, iDb);
switch( zLeft[0] ){
case 's': case 'S':
iCookie = 0;
break;
case 'f': case 'F':
iCookie = 1;
iDb = (-1*(iDb+1));
assert(iDb<=0);
break;
default:
iCookie = 5;
break;
}
if( zRight && iDb>=0 ){
/* Write the specified cookie value */
static const VdbeOpList setCookie[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
{ OP_Integer, 0, 1, 0}, /* 1 */
{ OP_SetCookie, 0, 0, 1}, /* 2 */
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+1, atoi(zRight));
sqlite3VdbeChangeP1(v, addr+2, iDb);
sqlite3VdbeChangeP2(v, addr+2, iCookie);
}else{
/* Read the specified cookie value */
static const VdbeOpList readCookie[] = {
{ OP_ReadCookie, 0, 1, 0}, /* 0 */
{ OP_ResultRow, 1, 1, 0}
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(readCookie), readCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP3(v, addr, iCookie);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, P4_TRANSIENT);
}
}else
#endif /* SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS */
#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
/*
** Report the current state of file logs for all databases
*/
if( sqlite3StrICmp(zLeft, "lock_status")==0 ){
static const char *const azLockName[] = {
"unlocked", "shared", "reserved", "pending", "exclusive"
};
int i;
Vdbe *v = sqlite3GetVdbe(pParse);
sqlite3VdbeSetNumCols(v, 2);
pParse->nMem = 2;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "database", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "status", P4_STATIC);
for(i=0; i<db->nDb; i++){
Btree *pBt;
Pager *pPager;
const char *zState = "unknown";
int j;
if( db->aDb[i].zName==0 ) continue;
sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, db->aDb[i].zName, P4_STATIC);
pBt = db->aDb[i].pBt;
if( pBt==0 || (pPager = sqlite3BtreePager(pBt))==0 ){
zState = "closed";
}else if( sqlite3_file_control(db, i ? db->aDb[i].zName : 0,
SQLITE_FCNTL_LOCKSTATE, &j)==SQLITE_OK ){
zState = azLockName[j];
}
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, zState, P4_STATIC);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2);
}
}else
#endif
#ifdef SQLITE_SSE
/*
** Check to see if the sqlite_statements table exists. Create it
** if it does not.
*/
if( sqlite3StrICmp(zLeft, "create_sqlite_statement_table")==0 ){
extern int sqlite3CreateStatementsTable(Parse*);
sqlite3CreateStatementsTable(pParse);
}else
#endif
#if SQLITE_HAS_CODEC
if( sqlite3StrICmp(zLeft, "key")==0 ){
sqlite3_key(db, zRight, strlen(zRight));
}else
#endif
#if SQLITE_HAS_CODEC || defined(SQLITE_ENABLE_CEROD)
if( sqlite3StrICmp(zLeft, "activate_extensions")==0 ){
#if SQLITE_HAS_CODEC
if( sqlite3StrNICmp(zRight, "see-", 4)==0 ){
extern void sqlite3_activate_see(const char*);
sqlite3_activate_see(&zRight[4]);
}
#endif
#ifdef SQLITE_ENABLE_CEROD
if( sqlite3StrNICmp(zRight, "cerod-", 6)==0 ){
extern void sqlite3_activate_cerod(const char*);
sqlite3_activate_cerod(&zRight[6]);
}
#endif
}
#endif
{}
if( v ){
/* Code an OP_Expire at the end of each PRAGMA program to cause
** the VDBE implementing the pragma to expire. Most (all?) pragmas
** are only valid for a single execution.
*/
sqlite3VdbeAddOp2(v, OP_Expire, 1, 0);
/*
** Reset the safety level, in case the fullfsync flag or synchronous
** setting changed.
*/
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
if( db->autoCommit ){
sqlite3BtreeSetSafetyLevel(pDb->pBt, pDb->safety_level,
(db->flags&SQLITE_FullFSync)!=0);
}
#endif
}
pragma_out:
sqlite3DbFree(db, zLeft);
sqlite3DbFree(db, zRight);
}
/*
** Process an UPDATE statement.
**
** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL;
** \_______/ \________/ \______/ \________________/
* onError pTabList pChanges pWhere
*/
void sqlite3Update(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table in which we should change things */
ExprList *pChanges, /* Things to be changed */
Expr *pWhere, /* The WHERE clause. May be null */
int onError /* How to handle constraint errors */
){
int i, j; /* Loop counters */
Table *pTab; /* The table to be updated */
int addrTop = 0; /* VDBE instruction address of the start of the loop */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Vdbe *v; /* The virtual database engine */
Index *pIdx; /* For looping over indices */
Index *pPk; /* The PRIMARY KEY index for WITHOUT ROWID tables */
int nIdx; /* Number of indices that need updating */
int iBaseCur; /* Base cursor number */
int iDataCur; /* Cursor for the canonical data btree */
int iIdxCur; /* Cursor for the first index */
sqlite3 *db; /* The database structure */
int *aRegIdx = 0; /* One register assigned to each index to be updated */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
u8 *aToOpen; /* 1 for tables and indices to be opened */
u8 chngPk; /* PRIMARY KEY changed in a WITHOUT ROWID table */
u8 chngRowid; /* Rowid changed in a normal table */
u8 chngKey; /* Either chngPk or chngRowid */
Expr *pRowidExpr = 0; /* Expression defining the new record number */
AuthContext sContext; /* The authorization context */
NameContext sNC; /* The name-context to resolve expressions in */
int iDb; /* Database containing the table being updated */
int okOnePass; /* True for one-pass algorithm without the FIFO */
int hasFK; /* True if foreign key processing is required */
int labelBreak; /* Jump here to break out of UPDATE loop */
int labelContinue; /* Jump here to continue next step of UPDATE loop */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True when updating a view (INSTEAD OF trigger) */
Trigger *pTrigger; /* List of triggers on pTab, if required */
int tmask; /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */
#endif
int newmask; /* Mask of NEW.* columns accessed by BEFORE triggers */
int iEph = 0; /* Ephemeral table holding all primary key values */
int nKey = 0; /* Number of elements in regKey for WITHOUT ROWID */
int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */
/* Register Allocations */
int regRowCount = 0; /* A count of rows changed */
int regOldRowid = 0; /* The old rowid */
int regNewRowid = 0; /* The new rowid */
int regNew = 0; /* Content of the NEW.* table in triggers */
int regOld = 0; /* Content of OLD.* table in triggers */
int regRowSet = 0; /* Rowset of rows to be updated */
int regKey = 0; /* composite PRIMARY KEY value */
memset(&sContext, 0, sizeof(sContext));
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto update_cleanup;
}
assert( pTabList->nSrc==1 );
/* Locate the table which we want to update.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto update_cleanup;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
/* Figure out if we have any triggers and if the table being
** updated is a view.
*/
#ifndef SQLITE_OMIT_TRIGGER
pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask);
isView = pTab->pSelect!=0;
assert( pTrigger || tmask==0 );
#else
# define pTrigger 0
# define isView 0
# define tmask 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
if( sqlite3IsReadOnly(pParse, pTab, tmask) ){
goto update_cleanup;
}
/* Allocate a cursors for the main database table and for all indices.
** The index cursors might not be used, but if they are used they
** need to occur right after the database cursor. So go ahead and
** allocate enough space, just in case.
*/
pTabList->a[0].iCursor = iBaseCur = iDataCur = pParse->nTab++;
iIdxCur = iDataCur+1;
pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab);
for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){
if( IsPrimaryKeyIndex(pIdx) && pPk!=0 ){
iDataCur = pParse->nTab;
pTabList->a[0].iCursor = iDataCur;
}
pParse->nTab++;
}
/* Allocate space for aXRef[], aRegIdx[], and aToOpen[].
** Initialize aXRef[] and aToOpen[] to their default values.
*/
aXRef = sqlite3DbMallocRaw(db, sizeof(int) * (pTab->nCol+nIdx) + nIdx+2 );
if( aXRef==0 ) goto update_cleanup;
aRegIdx = aXRef+pTab->nCol;
aToOpen = (u8*)(aRegIdx+nIdx);
memset(aToOpen, 1, nIdx+1);
aToOpen[nIdx+1] = 0;
for(i=0; i<pTab->nCol; i++) aXRef[i] = -1;
/* Initialize the name-context */
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
/* Resolve the column names in all the expressions of the
** of the UPDATE statement. Also find the column index
** for each column to be updated in the pChanges array. For each
** column to be updated, make sure we have authorization to change
** that column.
*/
chngRowid = chngPk = 0;
for(i=0; i<pChanges->nExpr; i++){
if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){
goto update_cleanup;
}
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){
if( j==pTab->iPKey ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else if( pPk && (pTab->aCol[j].colFlags & COLFLAG_PRIMKEY)!=0 ){
chngPk = 1;
}
aXRef[j] = i;
break;
}
}
if( j>=pTab->nCol ){
if( pPk==0 && sqlite3IsRowid(pChanges->a[i].zName) ){
j = -1;
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else{
sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName);
pParse->checkSchema = 1;
goto update_cleanup;
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
j<0 ? "ROWID" : pTab->aCol[j].zName,
db->aDb[iDb].zName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
aXRef[j] = -1;
}
}
#endif
}
assert( (chngRowid & chngPk)==0 );
assert( chngRowid==0 || chngRowid==1 );
assert( chngPk==0 || chngPk==1 );
chngKey = chngRowid + chngPk;
/* The SET expressions are not actually used inside the WHERE loop.
** So reset the colUsed mask
*/
pTabList->a[0].colUsed = 0;
hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngKey);
/* There is one entry in the aRegIdx[] array for each index on the table
** being updated. Fill in aRegIdx[] with a register number that will hold
** the key for accessing each index.
**
** FIXME: Be smarter about omitting indexes that use expressions.
*/
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int reg;
if( chngKey || hasFK || pIdx->pPartIdxWhere || pIdx==pPk ){
reg = ++pParse->nMem;
}else{
reg = 0;
for(i=0; i<pIdx->nKeyCol; i++){
i16 iIdxCol = pIdx->aiColumn[i];
if( iIdxCol<0 || aXRef[iIdxCol]>=0 ){
reg = ++pParse->nMem;
break;
}
}
}
if( reg==0 ) aToOpen[j+1] = 0;
aRegIdx[j] = reg;
}
/* Begin generating code. */
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto update_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, 1, iDb);
/* Allocate required registers. */
if( !IsVirtual(pTab) ){
regRowSet = ++pParse->nMem;
regOldRowid = regNewRowid = ++pParse->nMem;
if( chngPk || pTrigger || hasFK ){
regOld = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
if( chngKey || pTrigger || hasFK ){
regNewRowid = ++pParse->nMem;
}
regNew = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
/* Start the view context. */
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* If we are trying to update a view, realize that view into
** an ephemeral table.
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab, pWhere, iDataCur);
}
#endif
/* Resolve the column names in all the expressions in the
** WHERE clause.
*/
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto update_cleanup;
}
#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Virtual tables must be handled separately */
if( IsVirtual(pTab) ){
updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef,
pWhere, onError);
goto update_cleanup;
}
#endif
/* Begin the database scan
*/
if( HasRowid(pTab) ){
sqlite3VdbeAddOp3(v, OP_Null, 0, regRowSet, regOldRowid);
pWInfo = sqlite3WhereBegin(
pParse, pTabList, pWhere, 0, 0, WHERE_ONEPASS_DESIRED, iIdxCur
);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
/* Remember the rowid of every item to be updated.
*/
sqlite3VdbeAddOp2(v, OP_Rowid, iDataCur, regOldRowid);
if( !okOnePass ){
sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
}
/* End the database scan loop.
*/
sqlite3WhereEnd(pWInfo);
}else{
int iPk; /* First of nPk memory cells holding PRIMARY KEY value */
i16 nPk; /* Number of components of the PRIMARY KEY */
int addrOpen; /* Address of the OpenEphemeral instruction */
assert( pPk!=0 );
nPk = pPk->nKeyCol;
iPk = pParse->nMem+1;
pParse->nMem += nPk;
regKey = ++pParse->nMem;
iEph = pParse->nTab++;
sqlite3VdbeAddOp2(v, OP_Null, 0, iPk);
addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk);
sqlite3VdbeSetP4KeyInfo(pParse, pPk);
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0,
WHERE_ONEPASS_DESIRED, iIdxCur);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
for(i=0; i<nPk; i++){
assert( pPk->aiColumn[i]>=0 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, pPk->aiColumn[i],
iPk+i);
}
if( okOnePass ){
sqlite3VdbeChangeToNoop(v, addrOpen);
nKey = nPk;
regKey = iPk;
}else{
sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, regKey,
sqlite3IndexAffinityStr(db, pPk), nPk);
sqlite3VdbeAddOp2(v, OP_IdxInsert, iEph, regKey);
}
sqlite3WhereEnd(pWInfo);
}
/* Initialize the count of updated rows
*/
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){
regRowCount = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
}
labelBreak = sqlite3VdbeMakeLabel(v);
if( !isView ){
/*
** Open every index that needs updating. Note that if any
** index could potentially invoke a REPLACE conflict resolution
** action, then we need to open all indices because we might need
** to be deleting some records.
*/
if( onError==OE_Replace ){
memset(aToOpen, 1, nIdx+1);
}else{
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
if( pIdx->onError==OE_Replace ){
memset(aToOpen, 1, nIdx+1);
break;
}
}
}
if( okOnePass ){
if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0;
if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0;
}
sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur, aToOpen,
0, 0);
}
/* Top of the update loop */
if( okOnePass ){
if( aToOpen[iDataCur-iBaseCur] && !isView ){
assert( pPk );
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey);
VdbeCoverageNeverTaken(v);
}
labelContinue = labelBreak;
sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak);
VdbeCoverageIf(v, pPk==0);
VdbeCoverageIf(v, pPk!=0);
}else if( pPk ){
labelContinue = sqlite3VdbeMakeLabel(v);
sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v);
addrTop = sqlite3VdbeAddOp2(v, OP_RowKey, iEph, regKey);
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0);
VdbeCoverage(v);
}else{
labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, labelBreak,
regOldRowid);
VdbeCoverage(v);
sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid);
VdbeCoverage(v);
}
/* If the record number will change, set register regNewRowid to
** contain the new value. If the record number is not being modified,
** then regNewRowid is the same register as regOldRowid, which is
** already populated. */
assert( chngKey || pTrigger || hasFK || regOldRowid==regNewRowid );
if( chngRowid ){
sqlite3ExprCode(pParse, pRowidExpr, regNewRowid);
sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid); VdbeCoverage(v);
}
/* Compute the old pre-UPDATE content of the row being changed, if that
** information is needed */
if( chngPk || hasFK || pTrigger ){
u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0);
oldmask |= sqlite3TriggerColmask(pParse,
pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( oldmask==0xffffffff
|| (i<32 && (oldmask & MASKBIT32(i))!=0)
|| (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0
){
testcase( oldmask!=0xffffffff && i==31 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regOld+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i);
}
}
if( chngRowid==0 && pPk==0 ){
sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid);
}
}
/* Populate the array of registers beginning at regNew with the new
** row data. This array is used to check constants, create the new
** table and index records, and as the values for any new.* references
** made by triggers.
**
** If there are one or more BEFORE triggers, then do not populate the
** registers associated with columns that are (a) not modified by
** this UPDATE statement and (b) not accessed by new.* references. The
** values for registers not modified by the UPDATE must be reloaded from
** the database after the BEFORE triggers are fired anyway (as the trigger
** may have modified them). So not loading those that are not going to
** be used eliminates some redundant opcodes.
*/
newmask = sqlite3TriggerColmask(
pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}else{
j = aXRef[i];
if( j>=0 ){
sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i);
}else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask & MASKBIT32(i)) ){
/* This branch loads the value of a column that will not be changed
** into a register. This is done if there are no BEFORE triggers, or
** if there are one or more BEFORE triggers that use this value via
** a new.* reference in a trigger program.
*/
testcase( i==31 );
testcase( i==32 );
sqlite3ExprCodeGetColumnToReg(pParse, pTab, i, iDataCur, regNew+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}
}
}
/* Fire any BEFORE UPDATE triggers. This happens before constraints are
** verified. One could argue that this is wrong.
*/
if( tmask&TRIGGER_BEFORE ){
sqlite3TableAffinity(v, pTab, regNew);
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_BEFORE, pTab, regOldRowid, onError, labelContinue);
/* The row-trigger may have deleted the row being updated. In this
** case, jump to the next row. No updates or AFTER triggers are
** required. This behavior - what happens when the row being updated
** is deleted or renamed by a BEFORE trigger - is left undefined in the
** documentation.
*/
if( pPk ){
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue,regKey,nKey);
VdbeCoverage(v);
}else{
sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid);
VdbeCoverage(v);
}
/* If it did not delete it, the row-trigger may still have modified
** some of the columns of the row being updated. Load the values for
** all columns not modified by the update statement into their
** registers in case this has happened.
*/
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]<0 && i!=pTab->iPKey ){
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i);
}
}
}
if( !isView ){
int addr1 = 0; /* Address of jump instruction */
int bReplace = 0; /* True if REPLACE conflict resolution might happen */
/* Do constraint checks. */
assert( regOldRowid>0 );
sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur,
regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace);
/* Do FK constraint checks. */
if( hasFK ){
sqlite3FkCheck(pParse, pTab, regOldRowid, 0, aXRef, chngKey);
}
/* Delete the index entries associated with the current record. */
if( bReplace || chngKey ){
if( pPk ){
addr1 = sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, 0, regKey, nKey);
}else{
addr1 = sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, 0, regOldRowid);
}
VdbeCoverageNeverTaken(v);
}
sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, aRegIdx, -1);
/* If changing the record number, delete the old record. */
if( hasFK || chngKey || pPk!=0 ){
sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, 0);
}
if( bReplace || chngKey ){
sqlite3VdbeJumpHere(v, addr1);
}
if( hasFK ){
sqlite3FkCheck(pParse, pTab, 0, regNewRowid, aXRef, chngKey);
}
/* Insert the new index entries and the new record. */
sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur,
regNewRowid, aRegIdx, 1, 0, 0);
/* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
** handle rows (possibly in other tables) that refer via a foreign key
** to the row just updated. */
if( hasFK ){
sqlite3FkActions(pParse, pTab, pChanges, regOldRowid, aXRef, chngKey);
}
}
/* Increment the row counter
*/
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){
sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1);
}
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_AFTER, pTab, regOldRowid, onError, labelContinue);
/* Repeat the above with the next record to be updated, until
** all record selected by the WHERE clause have been updated.
*/
if( okOnePass ){
/* Nothing to do at end-of-loop for a single-pass */
}else if( pPk ){
sqlite3VdbeResolveLabel(v, labelContinue);
sqlite3VdbeAddOp2(v, OP_Next, iEph, addrTop); VdbeCoverage(v);
}else{
sqlite3VdbeGoto(v, labelContinue);
}
sqlite3VdbeResolveLabel(v, labelBreak);
/* Close all tables */
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
assert( aRegIdx );
if( aToOpen[i+1] ){
sqlite3VdbeAddOp2(v, OP_Close, iIdxCur+i, 0);
}
}
if( iDataCur<iIdxCur ) sqlite3VdbeAddOp2(v, OP_Close, iDataCur, 0);
/* Update the sqlite_sequence table by storing the content of the
** maximum rowid counter values recorded while inserting into
** autoincrement tables.
*/
if( pParse->nested==0 && pParse->pTriggerTab==0 ){
sqlite3AutoincrementEnd(pParse);
}
/*
** Return the number of rows that were changed. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){
sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC);
}
update_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3DbFree(db, aXRef); /* Also frees aRegIdx[] and aToOpen[] */
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprListDelete(db, pChanges);
sqlite3ExprDelete(db, pWhere);
return;
}
/*
** Generate code to do a constraint check prior to an INSERT or an UPDATE.
**
** When this routine is called, the stack contains (from bottom to top)
** the following values:
**
** 1. The rowid of the row to be updated before the update. This
** value is omitted unless we are doing an UPDATE that involves a
** change to the record number.
**
** 2. The rowid of the row after the update.
**
** 3. The data in the first column of the entry after the update.
**
** i. Data from middle columns...
**
** N. The data in the last column of the entry after the update.
**
** The old rowid shown as entry (1) above is omitted unless both isUpdate
** and rowidChng are 1. isUpdate is true for UPDATEs and false for
** INSERTs and rowidChng is true if the record number is being changed.
**
** The code generated by this routine pushes additional entries onto
** the stack which are the keys for new index entries for the new record.
** The order of index keys is the same as the order of the indices on
** the pTable->pIndex list. A key is only created for index i if
** aIdxUsed!=0 and aIdxUsed[i]!=0.
**
** This routine also generates code to check constraints. NOT NULL,
** CHECK, and UNIQUE constraints are all checked. If a constraint fails,
** then the appropriate action is performed. There are five possible
** actions: ROLLBACK, ABORT, FAIL, REPLACE, and IGNORE.
**
** Constraint type Action What Happens
** --------------- ---------- ----------------------------------------
** any ROLLBACK The current transaction is rolled back and
** sqlite3_exec() returns immediately with a
** return code of SQLITE_CONSTRAINT.
**
** any ABORT Back out changes from the current command
** only (do not do a complete rollback) then
** cause sqlite3_exec() to return immediately
** with SQLITE_CONSTRAINT.
**
** any FAIL Sqlite_exec() returns immediately with a
** return code of SQLITE_CONSTRAINT. The
** transaction is not rolled back and any
** prior changes are retained.
**
** any IGNORE The record number and data is popped from
** the stack and there is an immediate jump
** to label ignoreDest.
**
** NOT NULL REPLACE The NULL value is replace by the default
** value for that column. If the default value
** is NULL, the action is the same as ABORT.
**
** UNIQUE REPLACE The other row that conflicts with the row
** being inserted is removed.
**
** CHECK REPLACE Illegal. The results in an exception.
**
** Which action to take is determined by the overrideError parameter.
** Or if overrideError==OE_Default, then the pParse->onError parameter
** is used. Or if pParse->onError==OE_Default then the onError value
** for the constraint is used.
**
** The calling routine must open a read/write cursor for pTab with
** cursor number "base". All indices of pTab must also have open
** read/write cursors with cursor number base+i for the i-th cursor.
** Except, if there is no possibility of a REPLACE action then
** cursors do not need to be open for indices where aIdxUsed[i]==0.
**
** If the isUpdate flag is true, it means that the "base" cursor is
** initially pointing to an entry that is being updated. The isUpdate
** flag causes extra code to be generated so that the "base" cursor
** is still pointing at the same entry after the routine returns.
** Without the isUpdate flag, the "base" cursor might be moved.
*/
void sqlite3GenerateConstraintChecks(
Parse *pParse, /* The parser context */
Table *pTab, /* the table into which we are inserting */
int base, /* Index of a read/write cursor pointing at pTab */
char *aIdxUsed, /* Which indices are used. NULL means all are used */
int rowidChng, /* True if the record number will change */
int isUpdate, /* True for UPDATE, False for INSERT */
int overrideError, /* Override onError to this if not OE_Default */
int ignoreDest /* Jump to this label on an OE_Ignore resolution */
){
int i;
Vdbe *v;
int nCol;
int onError;
int addr;
int extra;
int iCur;
Index *pIdx;
int seenReplace = 0;
int jumpInst1=0, jumpInst2;
int hasTwoRowids = (isUpdate && rowidChng);
v = sqlite3GetVdbe(pParse);
assert( v!=0 );
assert( pTab->pSelect==0 ); /* This table is not a VIEW */
nCol = pTab->nCol;
/* Test all NOT NULL constraints.
*/
for(i=0; i<nCol; i++){
if( i==pTab->iPKey ){
continue;
}
onError = pTab->aCol[i].notNull;
if( onError==OE_None ) continue;
if( overrideError!=OE_Default ){
onError = overrideError;
}else if( onError==OE_Default ){
onError = OE_Abort;
}
if( onError==OE_Replace && pTab->aCol[i].pDflt==0 ){
onError = OE_Abort;
}
sqlite3VdbeAddOp(v, OP_Dup, nCol-1-i, 1);
addr = sqlite3VdbeAddOp(v, OP_NotNull, 1, 0);
assert( onError==OE_Rollback || onError==OE_Abort || onError==OE_Fail
|| onError==OE_Ignore || onError==OE_Replace );
switch( onError ){
case OE_Rollback:
case OE_Abort:
case OE_Fail: {
char *zMsg = 0;
sqlite3VdbeAddOp(v, OP_Halt, SQLITE_CONSTRAINT, onError);
sqlite3SetString(&zMsg, pTab->zName, ".", pTab->aCol[i].zName,
" may not be NULL", (char*)0);
sqlite3VdbeChangeP3(v, -1, zMsg, P3_DYNAMIC);
break;
}
case OE_Ignore: {
sqlite3VdbeAddOp(v, OP_Pop, nCol+1+hasTwoRowids, 0);
sqlite3VdbeAddOp(v, OP_Goto, 0, ignoreDest);
break;
}
case OE_Replace: {
sqlite3ExprCode(pParse, pTab->aCol[i].pDflt);
sqlite3VdbeAddOp(v, OP_Push, nCol-i, 0);
break;
}
}
sqlite3VdbeJumpHere(v, addr);
}
/* Test all CHECK constraints
*/
#ifndef SQLITE_OMIT_CHECK
if( pTab->pCheck && (pParse->db->flags & SQLITE_IgnoreChecks)==0 ){
int allOk = sqlite3VdbeMakeLabel(v);
assert( pParse->ckOffset==0 );
pParse->ckOffset = nCol;
sqlite3ExprIfTrue(pParse, pTab->pCheck, allOk, 1);
assert( pParse->ckOffset==nCol );
pParse->ckOffset = 0;
onError = overrideError!=OE_Default ? overrideError : OE_Abort;
if( onError==OE_Ignore || onError==OE_Replace ){
sqlite3VdbeAddOp(v, OP_Pop, nCol+1+hasTwoRowids, 0);
sqlite3VdbeAddOp(v, OP_Goto, 0, ignoreDest);
}else{
sqlite3VdbeAddOp(v, OP_Halt, SQLITE_CONSTRAINT, onError);
}
sqlite3VdbeResolveLabel(v, allOk);
}
#endif /* !defined(SQLITE_OMIT_CHECK) */
/* If we have an INTEGER PRIMARY KEY, make sure the primary key
** of the new record does not previously exist. Except, if this
** is an UPDATE and the primary key is not changing, that is OK.
*/
if( rowidChng ){
onError = pTab->keyConf;
if( overrideError!=OE_Default ){
onError = overrideError;
}else if( onError==OE_Default ){
onError = OE_Abort;
}
if( isUpdate ){
sqlite3VdbeAddOp(v, OP_Dup, nCol+1, 1);
sqlite3VdbeAddOp(v, OP_Dup, nCol+1, 1);
jumpInst1 = sqlite3VdbeAddOp(v, OP_Eq, 0, 0);
}
sqlite3VdbeAddOp(v, OP_Dup, nCol, 1);
jumpInst2 = sqlite3VdbeAddOp(v, OP_NotExists, base, 0);
switch( onError ){
default: {
onError = OE_Abort;
/* Fall thru into the next case */
}
case OE_Rollback:
case OE_Abort:
case OE_Fail: {
sqlite3VdbeOp3(v, OP_Halt, SQLITE_CONSTRAINT, onError,
"PRIMARY KEY must be unique", P3_STATIC);
break;
}
case OE_Replace: {
sqlite3GenerateRowIndexDelete(v, pTab, base, 0);
if( isUpdate ){
sqlite3VdbeAddOp(v, OP_Dup, nCol+hasTwoRowids, 1);
sqlite3VdbeAddOp(v, OP_MoveGe, base, 0);
}
seenReplace = 1;
break;
}
case OE_Ignore: {
assert( seenReplace==0 );
sqlite3VdbeAddOp(v, OP_Pop, nCol+1+hasTwoRowids, 0);
sqlite3VdbeAddOp(v, OP_Goto, 0, ignoreDest);
break;
}
}
sqlite3VdbeJumpHere(v, jumpInst2);
if( isUpdate ){
sqlite3VdbeJumpHere(v, jumpInst1);
sqlite3VdbeAddOp(v, OP_Dup, nCol+1, 1);
sqlite3VdbeAddOp(v, OP_MoveGe, base, 0);
}
}
/* Test all UNIQUE constraints by creating entries for each UNIQUE
** index and making sure that duplicate entries do not already exist.
** Add the new records to the indices as we go.
*/
extra = -1;
for(iCur=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, iCur++){
if( aIdxUsed && aIdxUsed[iCur]==0 ) continue; /* Skip unused indices */
extra++;
/* Create a key for accessing the index entry */
sqlite3VdbeAddOp(v, OP_Dup, nCol+extra, 1);
for(i=0; i<pIdx->nColumn; i++){
int idx = pIdx->aiColumn[i];
if( idx==pTab->iPKey ){
sqlite3VdbeAddOp(v, OP_Dup, i+extra+nCol+1, 1);
}else{
sqlite3VdbeAddOp(v, OP_Dup, i+extra+nCol-idx, 1);
}
}
jumpInst1 = sqlite3VdbeAddOp(v, OP_MakeIdxRec, pIdx->nColumn, 0);
sqlite3IndexAffinityStr(v, pIdx);
/* Find out what action to take in case there is an indexing conflict */
onError = pIdx->onError;
if( onError==OE_None ) continue; /* pIdx is not a UNIQUE index */
if( overrideError!=OE_Default ){
onError = overrideError;
}else if( onError==OE_Default ){
onError = OE_Abort;
}
if( seenReplace ){
if( onError==OE_Ignore ) onError = OE_Replace;
else if( onError==OE_Fail ) onError = OE_Abort;
}
/* Check to see if the new index entry will be unique */
sqlite3VdbeAddOp(v, OP_Dup, extra+nCol+1+hasTwoRowids, 1);
jumpInst2 = sqlite3VdbeAddOp(v, OP_IsUnique, base+iCur+1, 0);
/* Generate code that executes if the new index entry is not unique */
assert( onError==OE_Rollback || onError==OE_Abort || onError==OE_Fail
|| onError==OE_Ignore || onError==OE_Replace );
switch( onError ){
case OE_Rollback:
case OE_Abort:
case OE_Fail: {
int j, n1, n2;
char zErrMsg[200];
strcpy(zErrMsg, pIdx->nColumn>1 ? "columns " : "column ");
n1 = strlen(zErrMsg);
for(j=0; j<pIdx->nColumn && n1<sizeof(zErrMsg)-30; j++){
char *zCol = pTab->aCol[pIdx->aiColumn[j]].zName;
n2 = strlen(zCol);
if( j>0 ){
strcpy(&zErrMsg[n1], ", ");
n1 += 2;
}
if( n1+n2>sizeof(zErrMsg)-30 ){
strcpy(&zErrMsg[n1], "...");
n1 += 3;
break;
}else{
strcpy(&zErrMsg[n1], zCol);
n1 += n2;
}
}
strcpy(&zErrMsg[n1],
pIdx->nColumn>1 ? " are not unique" : " is not unique");
sqlite3VdbeOp3(v, OP_Halt, SQLITE_CONSTRAINT, onError, zErrMsg, 0);
break;
}
case OE_Ignore: {
assert( seenReplace==0 );
sqlite3VdbeAddOp(v, OP_Pop, nCol+extra+3+hasTwoRowids, 0);
sqlite3VdbeAddOp(v, OP_Goto, 0, ignoreDest);
break;
}
case OE_Replace: {
sqlite3GenerateRowDelete(pParse->db, v, pTab, base, 0);
if( isUpdate ){
sqlite3VdbeAddOp(v, OP_Dup, nCol+extra+1+hasTwoRowids, 1);
sqlite3VdbeAddOp(v, OP_MoveGe, base, 0);
}
seenReplace = 1;
break;
}
}
#if NULL_DISTINCT_FOR_UNIQUE
sqlite3VdbeJumpHere(v, jumpInst1);
#endif
sqlite3VdbeJumpHere(v, jumpInst2);
}
}
void sqlite3Update(
Parse *pParse,
SrcList *pTabList,
ExprList *pChanges,
Expr *pWhere,
int onError
){
int i, j;
Table *pTab;
int addr = 0;
WhereInfo *pWInfo;
Vdbe *v;
Index *pIdx;
int nIdx;
int iCur;
sqlite3 *db;
int *aRegIdx = 0;
int *aXRef = 0;
int chngRowid;
Expr *pRowidExpr = 0;
int openAll = 0;
AuthContext sContext;
NameContext sNC;
int iDb;
int okOnePass;
int hasFK;
#ifndef SQLITE_OMIT_TRIGGER
int isView;
Trigger *pTrigger;
int tmask;
#endif
int newmask;
int regRowCount = 0;
int regOldRowid;
int regNewRowid;
int regNew;
int regOld = 0;
int regRowSet = 0;
memset(&sContext, 0, sizeof(sContext));
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto update_cleanup;
}
assert( pTabList->nSrc==1 );
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto update_cleanup;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
#ifndef SQLITE_OMIT_TRIGGER
pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask);
isView = pTab->pSelect!=0;
assert( pTrigger || tmask==0 );
#else
# define pTrigger 0
# define isView 0
# define tmask 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
if( sqlite3IsReadOnly(pParse, pTab, tmask) ){
goto update_cleanup;
}
aXRef = sqlite3DbMallocRaw(db, sizeof(int) * pTab->nCol );
if( aXRef==0 ) goto update_cleanup;
for(i=0; i<pTab->nCol; i++) aXRef[i] = -1;
pTabList->a[0].iCursor = iCur = pParse->nTab++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
pParse->nTab++;
}
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
chngRowid = 0;
for(i=0; i<pChanges->nExpr; i++){
if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){
goto update_cleanup;
}
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){
if( j==pTab->iPKey ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}
aXRef[j] = i;
break;
}
}
if( j>=pTab->nCol ){
if( sqlite3IsRowid(pChanges->a[i].zName) ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else{
sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName);
pParse->checkSchema = 1;
goto update_cleanup;
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
pTab->aCol[j].zName, db->aDb[iDb].zName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
aXRef[j] = -1;
}
}
#endif
}
hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngRowid);
for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){}
if( nIdx>0 ){
aRegIdx = sqlite3DbMallocRaw(db, sizeof(Index*) * nIdx );
if( aRegIdx==0 ) goto update_cleanup;
}
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int reg;
if( chngRowid ){
reg = ++pParse->nMem;
}else{
reg = 0;
for(i=0; i<pIdx->nColumn; i++){
if( aXRef[pIdx->aiColumn[i]]>=0 ){
reg = ++pParse->nMem;
break;
}
}
}
aRegIdx[j] = reg;
}
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto update_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, 1, iDb);
#ifndef SQLITE_OMIT_VIRTUALTABLE
if( IsVirtual(pTab) ){
updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef,
pWhere);
pWhere = 0;
pTabList = 0;
goto update_cleanup;
}
#endif
regOldRowid = regNewRowid = ++pParse->nMem;
if( pTrigger || hasFK ){
regOld = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
if( chngRowid || pTrigger || hasFK ){
regNewRowid = ++pParse->nMem;
}
regNew = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab, pWhere, iCur);
}
#endif
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto update_cleanup;
}
sqlite3VdbeAddOp2(v, OP_Null, 0, regOldRowid);
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere,0, WHERE_ONEPASS_DESIRED);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = pWInfo->okOnePass;
sqlite3VdbeAddOp2(v, OP_Rowid, iCur, regOldRowid);
if( !okOnePass ){
regRowSet = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
}
sqlite3WhereEnd(pWInfo);
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){
regRowCount = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
}
if( !isView ){
if( !okOnePass ) sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenWrite);
if( onError==OE_Replace ){
openAll = 1;
}else{
openAll = 0;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
if( pIdx->onError==OE_Replace ){
openAll = 1;
break;
}
}
}
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aRegIdx[i]>0 ){
KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx);
sqlite3VdbeAddOp4(v, OP_OpenWrite, iCur+i+1, pIdx->tnum, iDb,
(char*)pKey, P4_KEYINFO_HANDOFF);
assert( pParse->nTab>iCur+i+1 );
}
}
}
if( okOnePass ){
int a1 = sqlite3VdbeAddOp1(v, OP_NotNull, regOldRowid);
addr = sqlite3VdbeAddOp0(v, OP_Goto);
sqlite3VdbeJumpHere(v, a1);
}else{
addr = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, 0, regOldRowid);
}
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, regOldRowid);
assert( chngRowid || pTrigger || hasFK || regOldRowid==regNewRowid );
if( chngRowid ){
sqlite3ExprCode(pParse, pRowidExpr, regNewRowid);
sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid);
}
if( hasFK || pTrigger ){
u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0);
oldmask |= sqlite3TriggerColmask(pParse,
pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]<0 || oldmask==0xffffffff || (i<32 && (oldmask & (1<<i))) ){
sqlite3ExprCodeGetColumnOfTable(v, pTab, iCur, i, regOld+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i);
}
}
if( chngRowid==0 ){
sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid);
}
}
newmask = sqlite3TriggerColmask(
pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}else{
j = aXRef[i];
if( j>=0 ){
sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i);
}else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask&(1<<i)) ){
testcase( i==31 );
testcase( i==32 );
sqlite3VdbeAddOp3(v, OP_Column, iCur, i, regNew+i);
sqlite3ColumnDefault(v, pTab, i, regNew+i);
}
}
}
if( tmask&TRIGGER_BEFORE ){
sqlite3VdbeAddOp2(v, OP_Affinity, regNew, pTab->nCol);
sqlite3TableAffinityStr(v, pTab);
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_BEFORE, pTab, regOldRowid, onError, addr);
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, regOldRowid);
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]<0 && i!=pTab->iPKey ){
sqlite3VdbeAddOp3(v, OP_Column, iCur, i, regNew+i);
sqlite3ColumnDefault(v, pTab, i, regNew+i);
}
}
}
if( !isView ){
int j1;
sqlite3GenerateConstraintChecks(pParse, pTab, iCur, regNewRowid,
aRegIdx, (chngRowid?regOldRowid:0), 1, onError, addr, 0);
if( hasFK ){
sqlite3FkCheck(pParse, pTab, regOldRowid, 0);
}
j1 = sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, regOldRowid);
sqlite3GenerateRowIndexDelete(pParse, pTab, iCur, aRegIdx);
if( hasFK || chngRowid ){
sqlite3VdbeAddOp2(v, OP_Delete, iCur, 0);
}
sqlite3VdbeJumpHere(v, j1);
if( hasFK ){
sqlite3FkCheck(pParse, pTab, 0, regNewRowid);
}
sqlite3CompleteInsertion(pParse, pTab, iCur, regNewRowid, aRegIdx, 1, 0, 0);
if( hasFK ){
sqlite3FkActions(pParse, pTab, pChanges, regOldRowid);
}
}
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){
sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1);
}
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_AFTER, pTab, regOldRowid, onError, addr);
sqlite3VdbeAddOp2(v, OP_Goto, 0, addr);
sqlite3VdbeJumpHere(v, addr);
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aRegIdx[i]>0 ){
sqlite3VdbeAddOp2(v, OP_Close, iCur+i+1, 0);
}
}
sqlite3VdbeAddOp2(v, OP_Close, iCur, 0);
if( pParse->nested==0 && pParse->pTriggerTab==0 ){
sqlite3AutoincrementEnd(pParse);
}
if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){
sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC);
}
update_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3DbFree(db, aRegIdx);
sqlite3DbFree(db, aXRef);
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprListDelete(db, pChanges);
sqlite3ExprDelete(db, pWhere);
return;
}
/*
** Generate code to do an analysis of all indices associated with
** a single table.
*/
static void analyzeOneTable(
Parse *pParse, /* Parser context */
Table *pTab, /* Table whose indices are to be analyzed */
int iStatCur, /* Cursor that writes to the sqlite_stat1 table */
int iMem /* Available memory locations begin here */
){
Index *pIdx; /* An index to being analyzed */
int iIdxCur; /* Cursor number for index being analyzed */
int nCol; /* Number of columns in the index */
Vdbe *v; /* The virtual machine being built up */
int i; /* Loop counter */
int topOfLoop; /* The top of the loop */
int endOfLoop; /* The end of the loop */
int addr; /* The address of an instruction */
int iDb; /* Index of database containing pTab */
v = sqlite3GetVdbe(pParse);
if( v==0 || pTab==0 || pTab->pIndex==0 ){
/* Do no analysis for tables that have no indices */
return;
}
assert( sqlite3BtreeHoldsAllMutexes(pParse->db) );
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
assert( iDb>=0 );
#ifndef SQLITE_OMIT_AUTHORIZATION
if( sqlite3AuthCheck(pParse, SQLITE_ANALYZE, pTab->zName, 0,
pParse->db->aDb[iDb].zName ) ){
return;
}
#endif
/* Establish a read-lock on the table at the shared-cache level. */
sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName);
iIdxCur = pParse->nTab;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx);
/* Open a cursor to the index to be analyzed
*/
assert( iDb==sqlite3SchemaToIndex(pParse->db, pIdx->pSchema) );
sqlite3VdbeAddOp(v, OP_Integer, iDb, 0);
VdbeComment((v, "# %s", pIdx->zName));
sqlite3VdbeOp3(v, OP_OpenRead, iIdxCur, pIdx->tnum,
(char *)pKey, P3_KEYINFO_HANDOFF);
nCol = pIdx->nColumn;
if( iMem+nCol*2>=pParse->nMem ){
pParse->nMem = iMem+nCol*2+1;
}
sqlite3VdbeAddOp(v, OP_SetNumColumns, iIdxCur, nCol+1);
/* Memory cells are used as follows:
**
** mem[iMem]: The total number of rows in the table.
** mem[iMem+1]: Number of distinct values in column 1
** ...
** mem[iMem+nCol]: Number of distinct values in column N
** mem[iMem+nCol+1] Last observed value of column 1
** ...
** mem[iMem+nCol+nCol]: Last observed value of column N
**
** Cells iMem through iMem+nCol are initialized to 0. The others
** are initialized to NULL.
*/
for(i=0; i<=nCol; i++){
sqlite3VdbeAddOp(v, OP_MemInt, 0, iMem+i);
}
for(i=0; i<nCol; i++){
sqlite3VdbeAddOp(v, OP_MemNull, iMem+nCol+i+1, 0);
}
/* Do the analysis.
*/
endOfLoop = sqlite3VdbeMakeLabel(v);
sqlite3VdbeAddOp(v, OP_Rewind, iIdxCur, endOfLoop);
topOfLoop = sqlite3VdbeCurrentAddr(v);
sqlite3VdbeAddOp(v, OP_MemIncr, 1, iMem);
for(i=0; i<nCol; i++){
sqlite3VdbeAddOp(v, OP_Column, iIdxCur, i);
sqlite3VdbeAddOp(v, OP_MemLoad, iMem+nCol+i+1, 0);
sqlite3VdbeAddOp(v, OP_Ne, 0x100, 0);
}
sqlite3VdbeAddOp(v, OP_Goto, 0, endOfLoop);
for(i=0; i<nCol; i++){
addr = sqlite3VdbeAddOp(v, OP_MemIncr, 1, iMem+i+1);
sqlite3VdbeChangeP2(v, topOfLoop + 3*i + 3, addr);
sqlite3VdbeAddOp(v, OP_Column, iIdxCur, i);
sqlite3VdbeAddOp(v, OP_MemStore, iMem+nCol+i+1, 1);
}
sqlite3VdbeResolveLabel(v, endOfLoop);
sqlite3VdbeAddOp(v, OP_Next, iIdxCur, topOfLoop);
sqlite3VdbeAddOp(v, OP_Close, iIdxCur, 0);
/* Store the results.
**
** The result is a single row of the sqlite_stat1 table. The first
** two columns are the names of the table and index. The third column
** is a string composed of a list of integer statistics about the
** index. The first integer in the list is the total number of entires
** in the index. There is one additional integer in the list for each
** column of the table. This additional integer is a guess of how many
** rows of the table the index will select. If D is the count of distinct
** values and K is the total number of rows, then the integer is computed
** as:
**
** I = (K+D-1)/D
**
** If K==0 then no entry is made into the sqlite_stat1 table.
** If K>0 then it is always the case the D>0 so division by zero
** is never possible.
*/
sqlite3VdbeAddOp(v, OP_MemLoad, iMem, 0);
addr = sqlite3VdbeAddOp(v, OP_IfNot, 0, 0);
sqlite3VdbeAddOp(v, OP_NewRowid, iStatCur, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pTab->zName, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pIdx->zName, 0);
sqlite3VdbeAddOp(v, OP_MemLoad, iMem, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, " ", 0);
for(i=0; i<nCol; i++){
sqlite3VdbeAddOp(v, OP_MemLoad, iMem, 0);
sqlite3VdbeAddOp(v, OP_MemLoad, iMem+i+1, 0);
sqlite3VdbeAddOp(v, OP_Add, 0, 0);
sqlite3VdbeAddOp(v, OP_AddImm, -1, 0);
sqlite3VdbeAddOp(v, OP_MemLoad, iMem+i+1, 0);
sqlite3VdbeAddOp(v, OP_Divide, 0, 0);
sqlite3VdbeAddOp(v, OP_ToInt, 0, 0);
if( i==nCol-1 ){
sqlite3VdbeAddOp(v, OP_Concat, nCol*2-1, 0);
}else{
sqlite3VdbeAddOp(v, OP_Dup, 1, 0);
}
}
sqlite3VdbeOp3(v, OP_MakeRecord, 3, 0, "aaa", 0);
sqlite3VdbeAddOp(v, OP_Insert, iStatCur, OPFLAG_APPEND);
sqlite3VdbeJumpHere(v, addr);
}
}
/*
** Generate code to do an analysis of all indices associated with
** a single table.
*/
static void analyzeOneTable(
Parse *pParse, /* Parser context */
Table *pTab, /* Table whose indices are to be analyzed */
Index *pOnlyIdx, /* If not NULL, only analyze this one index */
int iStatCur, /* Index of VdbeCursor that writes the sqlite_stat1 table */
int iMem /* Available memory locations begin here */
){
sqlite3 *db = pParse->db; /* Database handle */
Index *pIdx; /* An index to being analyzed */
int iIdxCur; /* Cursor open on index being analyzed */
Vdbe *v; /* The virtual machine being built up */
int i; /* Loop counter */
int topOfLoop; /* The top of the loop */
int endOfLoop; /* The end of the loop */
int jZeroRows = -1; /* Jump from here if number of rows is zero */
int iDb; /* Index of database containing pTab */
int regTabname = iMem++; /* Register containing table name */
int regIdxname = iMem++; /* Register containing index name */
int regSampleno = iMem++; /* Register containing next sample number */
int regCol = iMem++; /* Content of a column analyzed table */
int regRec = iMem++; /* Register holding completed record */
int regTemp = iMem++; /* Temporary use register */
int regRowid = iMem++; /* Rowid for the inserted record */
#ifdef SQLITE_ENABLE_STAT2
int addr = 0; /* Instruction address */
int regTemp2 = iMem++; /* Temporary use register */
int regSamplerecno = iMem++; /* Index of next sample to record */
int regRecno = iMem++; /* Current sample index */
int regLast = iMem++; /* Index of last sample to record */
int regFirst = iMem++; /* Index of first sample to record */
#endif
v = sqlite3GetVdbe(pParse);
if( v==0 || NEVER(pTab==0) ){
return;
}
if( pTab->tnum==0 ){
/* Do not gather statistics on views or virtual tables */
return;
}
if( memcmp(pTab->zName, "sqlite_", 7)==0 ){
/* Do not gather statistics on system tables */
return;
}
assert( sqlite3BtreeHoldsAllMutexes(db) );
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
assert( iDb>=0 );
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
#ifndef SQLITE_OMIT_AUTHORIZATION
if( sqlite3AuthCheck(pParse, SQLITE_ANALYZE, pTab->zName, 0,
db->aDb[iDb].zName ) ){
return;
}
#endif
/* Establish a read-lock on the table at the shared-cache level. */
sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName);
iIdxCur = pParse->nTab++;
sqlite3VdbeAddOp4(v, OP_String8, 0, regTabname, 0, pTab->zName, 0);
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
int nCol;
KeyInfo *pKey;
if( pOnlyIdx && pOnlyIdx!=pIdx ) continue;
nCol = pIdx->nColumn;
pKey = sqlite3IndexKeyinfo(pParse, pIdx);
if( iMem+1+(nCol*2)>pParse->nMem ){
pParse->nMem = iMem+1+(nCol*2);
}
/* Open a cursor to the index to be analyzed. */
assert( iDb==sqlite3SchemaToIndex(db, pIdx->pSchema) );
sqlite3VdbeAddOp4(v, OP_OpenRead, iIdxCur, pIdx->tnum, iDb,
(char *)pKey, P4_KEYINFO_HANDOFF);
VdbeComment((v, "%s", pIdx->zName));
/* Populate the register containing the index name. */
sqlite3VdbeAddOp4(v, OP_String8, 0, regIdxname, 0, pIdx->zName, 0);
#ifdef SQLITE_ENABLE_STAT2
/* If this iteration of the loop is generating code to analyze the
** first index in the pTab->pIndex list, then register regLast has
** not been populated. In this case populate it now. */
if( pTab->pIndex==pIdx ){
sqlite3VdbeAddOp2(v, OP_Integer, SQLITE_INDEX_SAMPLES, regSamplerecno);
sqlite3VdbeAddOp2(v, OP_Integer, SQLITE_INDEX_SAMPLES*2-1, regTemp);
sqlite3VdbeAddOp2(v, OP_Integer, SQLITE_INDEX_SAMPLES*2, regTemp2);
sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regLast);
sqlite3VdbeAddOp2(v, OP_Null, 0, regFirst);
addr = sqlite3VdbeAddOp3(v, OP_Lt, regSamplerecno, 0, regLast);
sqlite3VdbeAddOp3(v, OP_Divide, regTemp2, regLast, regFirst);
sqlite3VdbeAddOp3(v, OP_Multiply, regLast, regTemp, regLast);
sqlite3VdbeAddOp2(v, OP_AddImm, regLast, SQLITE_INDEX_SAMPLES*2-2);
sqlite3VdbeAddOp3(v, OP_Divide, regTemp2, regLast, regLast);
sqlite3VdbeJumpHere(v, addr);
}
/* Zero the regSampleno and regRecno registers. */
sqlite3VdbeAddOp2(v, OP_Integer, 0, regSampleno);
sqlite3VdbeAddOp2(v, OP_Integer, 0, regRecno);
sqlite3VdbeAddOp2(v, OP_Copy, regFirst, regSamplerecno);
#endif
/* The block of memory cells initialized here is used as follows.
**
** iMem:
** The total number of rows in the table.
**
** iMem+1 .. iMem+nCol:
** Number of distinct entries in index considering the
** left-most N columns only, where N is between 1 and nCol,
** inclusive.
**
** iMem+nCol+1 .. Mem+2*nCol:
** Previous value of indexed columns, from left to right.
**
** Cells iMem through iMem+nCol are initialized to 0. The others are
** initialized to contain an SQL NULL.
*/
for(i=0; i<=nCol; i++){
sqlite3VdbeAddOp2(v, OP_Integer, 0, iMem+i);
}
for(i=0; i<nCol; i++){
sqlite3VdbeAddOp2(v, OP_Null, 0, iMem+nCol+i+1);
}
/* Start the analysis loop. This loop runs through all the entries in
** the index b-tree. */
endOfLoop = sqlite3VdbeMakeLabel(v);
sqlite3VdbeAddOp2(v, OP_Rewind, iIdxCur, endOfLoop);
topOfLoop = sqlite3VdbeCurrentAddr(v);
sqlite3VdbeAddOp2(v, OP_AddImm, iMem, 1);
for(i=0; i<nCol; i++){
CollSeq *pColl;
sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, regCol);
if( i==0 ){
#ifdef SQLITE_ENABLE_STAT2
/* Check if the record that cursor iIdxCur points to contains a
** value that should be stored in the sqlite_stat2 table. If so,
** store it. */
int ne = sqlite3VdbeAddOp3(v, OP_Ne, regRecno, 0, regSamplerecno);
assert( regTabname+1==regIdxname
&& regTabname+2==regSampleno
&& regTabname+3==regCol
);
sqlite3VdbeChangeP5(v, SQLITE_JUMPIFNULL);
sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 4, regRec, "aaab", 0);
sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur+1, regRowid);
sqlite3VdbeAddOp3(v, OP_Insert, iStatCur+1, regRec, regRowid);
/* Calculate new values for regSamplerecno and regSampleno.
**
** sampleno = sampleno + 1
** samplerecno = samplerecno+(remaining records)/(remaining samples)
*/
sqlite3VdbeAddOp2(v, OP_AddImm, regSampleno, 1);
sqlite3VdbeAddOp3(v, OP_Subtract, regRecno, regLast, regTemp);
sqlite3VdbeAddOp2(v, OP_AddImm, regTemp, -1);
sqlite3VdbeAddOp2(v, OP_Integer, SQLITE_INDEX_SAMPLES, regTemp2);
sqlite3VdbeAddOp3(v, OP_Subtract, regSampleno, regTemp2, regTemp2);
sqlite3VdbeAddOp3(v, OP_Divide, regTemp2, regTemp, regTemp);
sqlite3VdbeAddOp3(v, OP_Add, regSamplerecno, regTemp, regSamplerecno);
sqlite3VdbeJumpHere(v, ne);
sqlite3VdbeAddOp2(v, OP_AddImm, regRecno, 1);
#endif
/* Always record the very first row */
sqlite3VdbeAddOp1(v, OP_IfNot, iMem+1);
}
assert( pIdx->azColl!=0 );
assert( pIdx->azColl[i]!=0 );
pColl = sqlite3LocateCollSeq(pParse, pIdx->azColl[i]);
sqlite3VdbeAddOp4(v, OP_Ne, regCol, 0, iMem+nCol+i+1,
(char*)pColl, P4_COLLSEQ);
sqlite3VdbeChangeP5(v, SQLITE_NULLEQ);
}
if( db->mallocFailed ){
/* If a malloc failure has occurred, then the result of the expression
** passed as the second argument to the call to sqlite3VdbeJumpHere()
** below may be negative. Which causes an assert() to fail (or an
** out-of-bounds write if SQLITE_DEBUG is not defined). */
return;
}
sqlite3VdbeAddOp2(v, OP_Goto, 0, endOfLoop);
for(i=0; i<nCol; i++){
int addr2 = sqlite3VdbeCurrentAddr(v) - (nCol*2);
if( i==0 ){
sqlite3VdbeJumpHere(v, addr2-1); /* Set jump dest for the OP_IfNot */
}
sqlite3VdbeJumpHere(v, addr2); /* Set jump dest for the OP_Ne */
sqlite3VdbeAddOp2(v, OP_AddImm, iMem+i+1, 1);
sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, iMem+nCol+i+1);
}
/* End of the analysis loop. */
sqlite3VdbeResolveLabel(v, endOfLoop);
sqlite3VdbeAddOp2(v, OP_Next, iIdxCur, topOfLoop);
sqlite3VdbeAddOp1(v, OP_Close, iIdxCur);
/* Store the results in sqlite_stat1.
**
** The result is a single row of the sqlite_stat1 table. The first
** two columns are the names of the table and index. The third column
** is a string composed of a list of integer statistics about the
** index. The first integer in the list is the total number of entries
** in the index. There is one additional integer in the list for each
** column of the table. This additional integer is a guess of how many
** rows of the table the index will select. If D is the count of distinct
** values and K is the total number of rows, then the integer is computed
** as:
**
** I = (K+D-1)/D
**
** If K==0 then no entry is made into the sqlite_stat1 table.
** If K>0 then it is always the case the D>0 so division by zero
** is never possible.
*/
sqlite3VdbeAddOp2(v, OP_SCopy, iMem, regSampleno);
if( jZeroRows<0 ){
jZeroRows = sqlite3VdbeAddOp1(v, OP_IfNot, iMem);
}
for(i=0; i<nCol; i++){
sqlite3VdbeAddOp4(v, OP_String8, 0, regTemp, 0, " ", 0);
sqlite3VdbeAddOp3(v, OP_Concat, regTemp, regSampleno, regSampleno);
sqlite3VdbeAddOp3(v, OP_Add, iMem, iMem+i+1, regTemp);
sqlite3VdbeAddOp2(v, OP_AddImm, regTemp, -1);
sqlite3VdbeAddOp3(v, OP_Divide, iMem+i+1, regTemp, regTemp);
sqlite3VdbeAddOp1(v, OP_ToInt, regTemp);
sqlite3VdbeAddOp3(v, OP_Concat, regTemp, regSampleno, regSampleno);
}
sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regRec, "aaa", 0);
sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regRowid);
sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regRec, regRowid);
sqlite3VdbeChangeP5(v, OPFLAG_APPEND);
}
/* If the table has no indices, create a single sqlite_stat1 entry
** containing NULL as the index name and the row count as the content.
*/
if( pTab->pIndex==0 ){
sqlite3VdbeAddOp3(v, OP_OpenRead, iIdxCur, pTab->tnum, iDb);
VdbeComment((v, "%s", pTab->zName));
sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regSampleno);
sqlite3VdbeAddOp1(v, OP_Close, iIdxCur);
jZeroRows = sqlite3VdbeAddOp1(v, OP_IfNot, regSampleno);
}else{
sqlite3VdbeJumpHere(v, jZeroRows);
jZeroRows = sqlite3VdbeAddOp0(v, OP_Goto);
}
sqlite3VdbeAddOp2(v, OP_Null, 0, regIdxname);
sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regRec, "aaa", 0);
sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regRowid);
sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regRec, regRowid);
sqlite3VdbeChangeP5(v, OPFLAG_APPEND);
if( pParse->nMem<regRec ) pParse->nMem = regRec;
sqlite3VdbeJumpHere(v, jZeroRows);
}
/*
** Process an UPDATE statement.
**
** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL;
** \_______/ \________/ \______/ \________________/
* onError pTabList pChanges pWhere
*/
void sqlite3Update(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table in which we should change things */
ExprList *pChanges, /* Things to be changed */
Expr *pWhere, /* The WHERE clause. May be null */
int onError /* How to handle constraint errors */
){
int i, j; /* Loop counters */
Table *pTab; /* The table to be updated */
int addr = 0; /* VDBE instruction address of the start of the loop */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Vdbe *v; /* The virtual database engine */
Index *pIdx; /* For looping over indices */
int nIdx; /* Number of indices that need updating */
int nIdxTotal; /* Total number of indices */
int iCur; /* VDBE Cursor number of pTab */
sqlite3 *db; /* The database structure */
Index **apIdx = 0; /* An array of indices that need updating too */
char *aIdxUsed = 0; /* aIdxUsed[i]==1 if the i-th index is used */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
int chngRowid; /* True if the record number is being changed */
Expr *pRowidExpr = 0; /* Expression defining the new record number */
int openAll = 0; /* True if all indices need to be opened */
AuthContext sContext; /* The authorization context */
NameContext sNC; /* The name-context to resolve expressions in */
int iDb; /* Database containing the table being updated */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* Trying to update a view */
int triggers_exist = 0; /* True if any row triggers exist */
#endif
int newIdx = -1; /* index of trigger "new" temp table */
int oldIdx = -1; /* index of trigger "old" temp table */
sContext.pParse = 0;
if( pParse->nErr || sqlite3MallocFailed() ){
goto update_cleanup;
}
db = pParse->db;
assert( pTabList->nSrc==1 );
/* Locate the table which we want to update.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto update_cleanup;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
/* Figure out if we have any triggers and if the table being
** updated is a view
*/
#ifndef SQLITE_OMIT_TRIGGER
triggers_exist = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges);
isView = pTab->pSelect!=0;
#else
# define triggers_exist 0
# define isView 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
if( sqlite3IsReadOnly(pParse, pTab, triggers_exist) ){
goto update_cleanup;
}
if( isView ){
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
}
aXRef = sqliteMallocRaw( sizeof(int) * pTab->nCol );
if( aXRef==0 ) goto update_cleanup;
for(i=0; i<pTab->nCol; i++) aXRef[i] = -1;
/* If there are FOR EACH ROW triggers, allocate cursors for the
** special OLD and NEW tables
*/
if( triggers_exist ){
newIdx = pParse->nTab++;
oldIdx = pParse->nTab++;
}
/* Allocate a cursors for the main database table and for all indices.
** The index cursors might not be used, but if they are used they
** need to occur right after the database cursor. So go ahead and
** allocate enough space, just in case.
*/
pTabList->a[0].iCursor = iCur = pParse->nTab++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
pParse->nTab++;
}
/* Initialize the name-context */
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
/* Resolve the column names in all the expressions of the
** of the UPDATE statement. Also find the column index
** for each column to be updated in the pChanges array. For each
** column to be updated, make sure we have authorization to change
** that column.
*/
chngRowid = 0;
for(i=0; i<pChanges->nExpr; i++){
if( sqlite3ExprResolveNames(&sNC, pChanges->a[i].pExpr) ){
goto update_cleanup;
}
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){
if( j==pTab->iPKey ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}
aXRef[j] = i;
break;
}
}
if( j>=pTab->nCol ){
if( sqlite3IsRowid(pChanges->a[i].zName) ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else{
sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName);
goto update_cleanup;
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
pTab->aCol[j].zName, db->aDb[iDb].zName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
aXRef[j] = -1;
}
}
#endif
}
/* Allocate memory for the array apIdx[] and fill it with pointers to every
** index that needs to be updated. Indices only need updating if their
** key includes one of the columns named in pChanges or if the record
** number of the original table entry is changing.
*/
for(nIdx=nIdxTotal=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdxTotal++){
if( chngRowid ){
i = 0;
}else {
for(i=0; i<pIdx->nColumn; i++){
if( aXRef[pIdx->aiColumn[i]]>=0 ) break;
}
}
if( i<pIdx->nColumn ) nIdx++;
}
if( nIdxTotal>0 ){
apIdx = sqliteMallocRaw( sizeof(Index*) * nIdx + nIdxTotal );
if( apIdx==0 ) goto update_cleanup;
aIdxUsed = (char*)&apIdx[nIdx];
}
for(nIdx=j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
if( chngRowid ){
i = 0;
}else{
for(i=0; i<pIdx->nColumn; i++){
if( aXRef[pIdx->aiColumn[i]]>=0 ) break;
}
}
if( i<pIdx->nColumn ){
apIdx[nIdx++] = pIdx;
aIdxUsed[j] = 1;
}else{
aIdxUsed[j] = 0;
}
}
/* Resolve the column names in all the expressions in the
** WHERE clause.
*/
if( sqlite3ExprResolveNames(&sNC, pWhere) ){
goto update_cleanup;
}
/* Start the view context
*/
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* Begin generating code.
*/
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto update_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, 1, iDb);
/* If we are trying to update a view, realize that view into
** a ephemeral table.
*/
if( isView ){
Select *pView;
pView = sqlite3SelectDup(pTab->pSelect);
sqlite3Select(pParse, pView, SRT_VirtualTab, iCur, 0, 0, 0, 0);
sqlite3SelectDelete(pView);
}
/* Begin the database scan
*/
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0);
if( pWInfo==0 ) goto update_cleanup;
/* Remember the index of every item to be updated.
*/
sqlite3VdbeAddOp(v, OP_Rowid, iCur, 0);
sqlite3VdbeAddOp(v, OP_FifoWrite, 0, 0);
/* End the database scan loop.
*/
sqlite3WhereEnd(pWInfo);
/* Initialize the count of updated rows
*/
if( db->flags & SQLITE_CountRows && !pParse->trigStack ){
sqlite3VdbeAddOp(v, OP_Integer, 0, 0);
}
if( triggers_exist ){
/* Create pseudo-tables for NEW and OLD
*/
sqlite3VdbeAddOp(v, OP_OpenPseudo, oldIdx, 0);
sqlite3VdbeAddOp(v, OP_SetNumColumns, oldIdx, pTab->nCol);
sqlite3VdbeAddOp(v, OP_OpenPseudo, newIdx, 0);
sqlite3VdbeAddOp(v, OP_SetNumColumns, newIdx, pTab->nCol);
/* The top of the update loop for when there are triggers.
*/
addr = sqlite3VdbeAddOp(v, OP_FifoRead, 0, 0);
if( !isView ){
sqlite3VdbeAddOp(v, OP_Dup, 0, 0);
sqlite3VdbeAddOp(v, OP_Dup, 0, 0);
/* Open a cursor and make it point to the record that is
** being updated.
*/
sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenRead);
}
sqlite3VdbeAddOp(v, OP_MoveGe, iCur, 0);
/* Generate the OLD table
*/
sqlite3VdbeAddOp(v, OP_Rowid, iCur, 0);
sqlite3VdbeAddOp(v, OP_RowData, iCur, 0);
sqlite3VdbeAddOp(v, OP_Insert, oldIdx, 0);
/* Generate the NEW table
*/
if( chngRowid ){
sqlite3ExprCodeAndCache(pParse, pRowidExpr);
}else{
sqlite3VdbeAddOp(v, OP_Rowid, iCur, 0);
}
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp(v, OP_Null, 0, 0);
continue;
}
j = aXRef[i];
if( j<0 ){
sqlite3VdbeAddOp(v, OP_Column, iCur, i);
sqlite3ColumnDefault(v, pTab, i);
}else{
sqlite3ExprCodeAndCache(pParse, pChanges->a[j].pExpr);
}
}
sqlite3VdbeAddOp(v, OP_MakeRecord, pTab->nCol, 0);
if( !isView ){
sqlite3TableAffinityStr(v, pTab);
}
if( pParse->nErr ) goto update_cleanup;
sqlite3VdbeAddOp(v, OP_Insert, newIdx, 0);
if( !isView ){
sqlite3VdbeAddOp(v, OP_Close, iCur, 0);
}
/* Fire the BEFORE and INSTEAD OF triggers
*/
if( sqlite3CodeRowTrigger(pParse, TK_UPDATE, pChanges, TRIGGER_BEFORE, pTab,
newIdx, oldIdx, onError, addr) ){
goto update_cleanup;
}
}
if( !isView ){
/*
** Open every index that needs updating. Note that if any
** index could potentially invoke a REPLACE conflict resolution
** action, then we need to open all indices because we might need
** to be deleting some records.
*/
sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenWrite);
if( onError==OE_Replace ){
openAll = 1;
}else{
openAll = 0;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
if( pIdx->onError==OE_Replace ){
openAll = 1;
break;
}
}
}
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aIdxUsed[i] ){
KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx);
sqlite3VdbeAddOp(v, OP_Integer, iDb, 0);
sqlite3VdbeOp3(v, OP_OpenWrite, iCur+i+1, pIdx->tnum,
(char*)pKey, P3_KEYINFO_HANDOFF);
assert( pParse->nTab>iCur+i+1 );
}
}
/* Loop over every record that needs updating. We have to load
** the old data for each record to be updated because some columns
** might not change and we will need to copy the old value.
** Also, the old data is needed to delete the old index entires.
** So make the cursor point at the old record.
*/
if( !triggers_exist ){
addr = sqlite3VdbeAddOp(v, OP_FifoRead, 0, 0);
sqlite3VdbeAddOp(v, OP_Dup, 0, 0);
}
sqlite3VdbeAddOp(v, OP_NotExists, iCur, addr);
/* If the record number will change, push the record number as it
** will be after the update. (The old record number is currently
** on top of the stack.)
*/
if( chngRowid ){
sqlite3ExprCode(pParse, pRowidExpr);
sqlite3VdbeAddOp(v, OP_MustBeInt, 0, 0);
}
/* Compute new data for this record.
*/
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp(v, OP_Null, 0, 0);
continue;
}
j = aXRef[i];
if( j<0 ){
sqlite3VdbeAddOp(v, OP_Column, iCur, i);
sqlite3ColumnDefault(v, pTab, i);
}else{
sqlite3ExprCode(pParse, pChanges->a[j].pExpr);
}
}
/* Do constraint checks
*/
sqlite3GenerateConstraintChecks(pParse, pTab, iCur, aIdxUsed, chngRowid, 1,
onError, addr);
/* Delete the old indices for the current record.
*/
sqlite3GenerateRowIndexDelete(db, v, pTab, iCur, aIdxUsed);
/* If changing the record number, delete the old record.
*/
if( chngRowid ){
sqlite3VdbeAddOp(v, OP_Delete, iCur, 0);
}
/* Create the new index entries and the new record.
*/
sqlite3CompleteInsertion(pParse, pTab, iCur, aIdxUsed, chngRowid, 1, -1);
}
/* Increment the row counter
*/
if( db->flags & SQLITE_CountRows && !pParse->trigStack){
sqlite3VdbeAddOp(v, OP_AddImm, 1, 0);
}
/* If there are triggers, close all the cursors after each iteration
** through the loop. The fire the after triggers.
*/
if( triggers_exist ){
if( !isView ){
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aIdxUsed[i] )
sqlite3VdbeAddOp(v, OP_Close, iCur+i+1, 0);
}
sqlite3VdbeAddOp(v, OP_Close, iCur, 0);
}
if( sqlite3CodeRowTrigger(pParse, TK_UPDATE, pChanges, TRIGGER_AFTER, pTab,
newIdx, oldIdx, onError, addr) ){
goto update_cleanup;
}
}
/* Repeat the above with the next record to be updated, until
** all record selected by the WHERE clause have been updated.
*/
sqlite3VdbeAddOp(v, OP_Goto, 0, addr);
sqlite3VdbeJumpHere(v, addr);
/* Close all tables if there were no FOR EACH ROW triggers */
if( !triggers_exist ){
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aIdxUsed[i] ){
sqlite3VdbeAddOp(v, OP_Close, iCur+i+1, 0);
}
}
sqlite3VdbeAddOp(v, OP_Close, iCur, 0);
}else{
sqlite3VdbeAddOp(v, OP_Close, newIdx, 0);
sqlite3VdbeAddOp(v, OP_Close, oldIdx, 0);
}
/*
** Return the number of rows that were changed. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( db->flags & SQLITE_CountRows && !pParse->trigStack && pParse->nested==0 ){
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", P3_STATIC);
}
update_cleanup:
sqlite3AuthContextPop(&sContext);
sqliteFree(apIdx);
sqliteFree(aXRef);
sqlite3SrcListDelete(pTabList);
sqlite3ExprListDelete(pChanges);
sqlite3ExprDelete(pWhere);
return;
}
/*
** Generate code for an UPDATE of a virtual table.
**
** There are two possible strategies - the default and the special
** "onepass" strategy. Onepass is only used if the virtual table
** implementation indicates that pWhere may match at most one row.
**
** The default strategy is to create an ephemeral table that contains
** for each row to be changed:
**
** (A) The original rowid of that row.
** (B) The revised rowid for the row.
** (C) The content of every column in the row.
**
** Then loop through the contents of this ephemeral table executing a
** VUpdate for each row. When finished, drop the ephemeral table.
**
** The "onepass" strategy does not use an ephemeral table. Instead, it
** stores the same values (A, B and C above) in a register array and
** makes a single invocation of VUpdate.
*/
static void updateVirtualTable(
Parse *pParse, /* The parsing context */
SrcList *pSrc, /* The virtual table to be modified */
Table *pTab, /* The virtual table */
ExprList *pChanges, /* The columns to change in the UPDATE statement */
Expr *pRowid, /* Expression used to recompute the rowid */
int *aXRef, /* Mapping from columns of pTab to entries in pChanges */
Expr *pWhere, /* WHERE clause of the UPDATE statement */
int onError /* ON CONFLICT strategy */
){
Vdbe *v = pParse->pVdbe; /* Virtual machine under construction */
int ephemTab; /* Table holding the result of the SELECT */
int i; /* Loop counter */
sqlite3 *db = pParse->db; /* Database connection */
const char *pVTab = (const char*)sqlite3GetVTable(db, pTab);
WhereInfo *pWInfo;
int nArg = 2 + pTab->nCol; /* Number of arguments to VUpdate */
int regArg; /* First register in VUpdate arg array */
int regRec; /* Register in which to assemble record */
int regRowid; /* Register for ephem table rowid */
int iCsr = pSrc->a[0].iCursor; /* Cursor used for virtual table scan */
int aDummy[2]; /* Unused arg for sqlite3WhereOkOnePass() */
int eOnePass; /* True to use onepass strategy */
int addr; /* Address of OP_OpenEphemeral */
/* Allocate nArg registers in which to gather the arguments for VUpdate. Then
** create and open the ephemeral table in which the records created from
** these arguments will be temporarily stored. */
assert( v );
ephemTab = pParse->nTab++;
addr= sqlite3VdbeAddOp2(v, OP_OpenEphemeral, ephemTab, nArg);
regArg = pParse->nMem + 1;
pParse->nMem += nArg;
regRec = ++pParse->nMem;
regRowid = ++pParse->nMem;
/* Start scanning the virtual table */
pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0,0,WHERE_ONEPASS_DESIRED,0);
if( pWInfo==0 ) return;
/* Populate the argument registers. */
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]>=0 ){
sqlite3ExprCode(pParse, pChanges->a[aXRef[i]].pExpr, regArg+2+i);
}else{
sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, i, regArg+2+i);
sqlite3VdbeChangeP5(v, OPFLAG_NOCHNG);/* Enable sqlite3_vtab_nochange() */
}
}
if( HasRowid(pTab) ){
sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg);
if( pRowid ){
sqlite3ExprCode(pParse, pRowid, regArg+1);
}else{
sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1);
}
}else{
Index *pPk; /* PRIMARY KEY index */
i16 iPk; /* PRIMARY KEY column */
pPk = sqlite3PrimaryKeyIndex(pTab);
assert( pPk!=0 );
assert( pPk->nKeyCol==1 );
iPk = pPk->aiColumn[0];
sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, iPk, regArg);
sqlite3VdbeAddOp2(v, OP_SCopy, regArg+2+iPk, regArg+1);
}
eOnePass = sqlite3WhereOkOnePass(pWInfo, aDummy);
/* There is no ONEPASS_MULTI on virtual tables */
assert( eOnePass==ONEPASS_OFF || eOnePass==ONEPASS_SINGLE );
if( eOnePass ){
/* If using the onepass strategy, no-op out the OP_OpenEphemeral coded
** above. */
sqlite3VdbeChangeToNoop(v, addr);
sqlite3VdbeAddOp1(v, OP_Close, iCsr);
}else{
/* Create a record from the argument register contents and insert it into
** the ephemeral table. */
sqlite3MultiWrite(pParse);
sqlite3VdbeAddOp3(v, OP_MakeRecord, regArg, nArg, regRec);
#ifdef SQLITE_DEBUG
/* Signal an assert() within OP_MakeRecord that it is allowed to
** accept no-change records with serial_type 10 */
sqlite3VdbeChangeP5(v, OPFLAG_NOCHNG_MAGIC);
#endif
sqlite3VdbeAddOp2(v, OP_NewRowid, ephemTab, regRowid);
sqlite3VdbeAddOp3(v, OP_Insert, ephemTab, regRec, regRowid);
}
if( eOnePass==ONEPASS_OFF ){
/* End the virtual table scan */
sqlite3WhereEnd(pWInfo);
/* Begin scannning through the ephemeral table. */
addr = sqlite3VdbeAddOp1(v, OP_Rewind, ephemTab); VdbeCoverage(v);
/* Extract arguments from the current row of the ephemeral table and
** invoke the VUpdate method. */
for(i=0; i<nArg; i++){
sqlite3VdbeAddOp3(v, OP_Column, ephemTab, i, regArg+i);
}
}
sqlite3VtabMakeWritable(pParse, pTab);
sqlite3VdbeAddOp4(v, OP_VUpdate, 0, nArg, regArg, pVTab, P4_VTAB);
sqlite3VdbeChangeP5(v, onError==OE_Default ? OE_Abort : onError);
sqlite3MayAbort(pParse);
/* End of the ephemeral table scan. Or, if using the onepass strategy,
** jump to here if the scan visited zero rows. */
if( eOnePass==ONEPASS_OFF ){
sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1); VdbeCoverage(v);
sqlite3VdbeJumpHere(v, addr);
sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0);
}else{
sqlite3WhereEnd(pWInfo);
}
}
/*
** Generate code for an UPDATE of a virtual table.
**
** There are two possible strategies - the default and the special
** "onepass" strategy. Onepass is only used if the virtual table
** implementation indicates that pWhere may match at most one row.
**
** The default strategy is to create an ephemeral table that contains
** for each row to be changed:
**
** (A) The original rowid of that row.
** (B) The revised rowid for the row.
** (C) The content of every column in the row.
**
** Then loop through the contents of this ephemeral table executing a
** VUpdate for each row. When finished, drop the ephemeral table.
**
** The "onepass" strategy does not use an ephemeral table. Instead, it
** stores the same values (A, B and C above) in a register array and
** makes a single invocation of VUpdate.
*/
static void updateVirtualTable(
Parse *pParse, /* The parsing context */
SrcList *pSrc, /* The virtual table to be modified */
Table *pTab, /* The virtual table */
ExprList *pChanges, /* The columns to change in the UPDATE statement */
Expr *pRowid, /* Expression used to recompute the rowid */
int *aXRef, /* Mapping from columns of pTab to entries in pChanges */
Expr *pWhere, /* WHERE clause of the UPDATE statement */
int onError /* ON CONFLICT strategy */
){
Vdbe *v = pParse->pVdbe; /* Virtual machine under construction */
int ephemTab; /* Table holding the result of the SELECT */
int i; /* Loop counter */
sqlite3 *db = pParse->db; /* Database connection */
const char *pVTab = (const char*)sqlite3GetVTable(db, pTab);
WhereInfo *pWInfo;
int nArg = 2 + pTab->nCol; /* Number of arguments to VUpdate */
int regArg; /* First register in VUpdate arg array */
int regRec; /* Register in which to assemble record */
int regRowid; /* Register for ephem table rowid */
int iCsr = pSrc->a[0].iCursor; /* Cursor used for virtual table scan */
int aDummy[2]; /* Unused arg for sqlite3WhereOkOnePass() */
int bOnePass; /* True to use onepass strategy */
int addr; /* Address of OP_OpenEphemeral */
/* Allocate nArg registers to martial the arguments to VUpdate. Then
** create and open the ephemeral table in which the records created from
** these arguments will be temporarily stored. */
assert( v );
ephemTab = pParse->nTab++;
addr= sqlite3VdbeAddOp2(v, OP_OpenEphemeral, ephemTab, nArg);
regArg = pParse->nMem + 1;
pParse->nMem += nArg;
regRec = ++pParse->nMem;
regRowid = ++pParse->nMem;
/* Start scanning the virtual table */
pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0,0,WHERE_ONEPASS_DESIRED,0);
if( pWInfo==0 ) return;
/* Populate the argument registers. */
sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg);
if( pRowid ){
sqlite3ExprCode(pParse, pRowid, regArg+1);
}else{
sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1);
}
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]>=0 ){
sqlite3ExprCode(pParse, pChanges->a[aXRef[i]].pExpr, regArg+2+i);
}else{
sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, i, regArg+2+i);
}
}
bOnePass = sqlite3WhereOkOnePass(pWInfo, aDummy);
if( bOnePass ){
/* If using the onepass strategy, no-op out the OP_OpenEphemeral coded
** above. Also, if this is a top-level parse (not a trigger), clear the
** multi-write flag so that the VM does not open a statement journal */
sqlite3VdbeChangeToNoop(v, addr);
if( sqlite3IsToplevel(pParse) ){
pParse->isMultiWrite = 0;
}
}else{
/* Create a record from the argument register contents and insert it into
** the ephemeral table. */
sqlite3VdbeAddOp3(v, OP_MakeRecord, regArg, nArg, regRec);
sqlite3VdbeAddOp2(v, OP_NewRowid, ephemTab, regRowid);
sqlite3VdbeAddOp3(v, OP_Insert, ephemTab, regRec, regRowid);
}
if( bOnePass==0 ){
/* End the virtual table scan */
sqlite3WhereEnd(pWInfo);
/* Begin scannning through the ephemeral table. */
addr = sqlite3VdbeAddOp1(v, OP_Rewind, ephemTab); VdbeCoverage(v);
/* Extract arguments from the current row of the ephemeral table and
** invoke the VUpdate method. */
for(i=0; i<nArg; i++){
sqlite3VdbeAddOp3(v, OP_Column, ephemTab, i, regArg+i);
}
}
sqlite3VtabMakeWritable(pParse, pTab);
sqlite3VdbeAddOp4(v, OP_VUpdate, 0, nArg, regArg, pVTab, P4_VTAB);
sqlite3VdbeChangeP5(v, onError==OE_Default ? OE_Abort : onError);
sqlite3MayAbort(pParse);
/* End of the ephemeral table scan. Or, if using the onepass strategy,
** jump to here if the scan visited zero rows. */
if( bOnePass==0 ){
sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1); VdbeCoverage(v);
sqlite3VdbeJumpHere(v, addr);
sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0);
}else{
sqlite3WhereEnd(pWInfo);
}
}
/*
** This function is called when a row is inserted into or deleted from the
** child table of foreign key constraint pFKey. If an SQL UPDATE is executed
** on the child table of pFKey, this function is invoked twice for each row
** affected - once to "delete" the old row, and then again to "insert" the
** new row.
**
** Each time it is called, this function generates VDBE code to locate the
** row in the parent table that corresponds to the row being inserted into
** or deleted from the child table. If the parent row can be found, no
** special action is taken. Otherwise, if the parent row can *not* be
** found in the parent table:
**
** Operation | FK type | Action taken
** --------------------------------------------------------------------------
** INSERT immediate Increment the "immediate constraint counter".
**
** DELETE immediate Decrement the "immediate constraint counter".
**
** INSERT deferred Increment the "deferred constraint counter".
**
** DELETE deferred Decrement the "deferred constraint counter".
**
** These operations are identified in the comment at the top of this file
** (fkey.c) as "I.1" and "D.1".
*/
static void fkLookupParent(
Parse *pParse, /* Parse context */
int iDb, /* Index of database housing pTab */
Table *pTab, /* Parent table of FK pFKey */
Index *pIdx, /* Unique index on parent key columns in pTab */
FKey *pFKey, /* Foreign key constraint */
int *aiCol, /* Map from parent key columns to child table columns */
int regData, /* Address of array containing child table row */
int nIncr, /* Increment constraint counter by this */
int isIgnore /* If true, pretend pTab contains all NULL values */
){
int i; /* Iterator variable */
Vdbe *v = sqlite3GetVdbe(pParse); /* Vdbe to add code to */
int iCur = pParse->nTab - 1; /* Cursor number to use */
int iOk = sqlite3VdbeMakeLabel(v); /* jump here if parent key found */
/* If nIncr is less than zero, then check at runtime if there are any
** outstanding constraints to resolve. If there are not, there is no need
** to check if deleting this row resolves any outstanding violations.
**
** Check if any of the key columns in the child table row are NULL. If
** any are, then the constraint is considered satisfied. No need to
** search for a matching row in the parent table. */
if( nIncr<0 ){
sqlite3VdbeAddOp2(v, OP_FkIfZero, pFKey->isDeferred, iOk);
}
for(i=0; i<pFKey->nCol; i++){
int iReg = aiCol[i] + regData + 1;
sqlite3VdbeAddOp2(v, OP_IsNull, iReg, iOk);
}
if( isIgnore==0 ){
if( pIdx==0 ){
/* If pIdx is NULL, then the parent key is the INTEGER PRIMARY KEY
** column of the parent table (table pTab). */
int iMustBeInt; /* Address of MustBeInt instruction */
int regTemp = sqlite3GetTempReg(pParse);
/* Invoke MustBeInt to coerce the child key value to an integer (i.e.
** apply the affinity of the parent key). If this fails, then there
** is no matching parent key. Before using MustBeInt, make a copy of
** the value. Otherwise, the value inserted into the child key column
** will have INTEGER affinity applied to it, which may not be correct. */
sqlite3VdbeAddOp2(v, OP_SCopy, aiCol[0]+1+regData, regTemp);
iMustBeInt = sqlite3VdbeAddOp2(v, OP_MustBeInt, regTemp, 0);
/* If the parent table is the same as the child table, and we are about
** to increment the constraint-counter (i.e. this is an INSERT operation),
** then check if the row being inserted matches itself. If so, do not
** increment the constraint-counter. */
if( pTab==pFKey->pFrom && nIncr==1 ){
sqlite3VdbeAddOp3(v, OP_Eq, regData, iOk, regTemp);
}
sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenRead);
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, regTemp);
sqlite3VdbeAddOp2(v, OP_Goto, 0, iOk);
sqlite3VdbeJumpHere(v, sqlite3VdbeCurrentAddr(v)-2);
sqlite3VdbeJumpHere(v, iMustBeInt);
sqlite3ReleaseTempReg(pParse, regTemp);
}else{
int nCol = pFKey->nCol;
int regTemp = sqlite3GetTempRange(pParse, nCol);
int regRec = sqlite3GetTempReg(pParse);
KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx);
sqlite3VdbeAddOp3(v, OP_OpenRead, iCur, pIdx->tnum, iDb);
sqlite3VdbeChangeP4(v, -1, (char*)pKey, P4_KEYINFO_HANDOFF);
for(i=0; i<nCol; i++){
sqlite3VdbeAddOp2(v, OP_Copy, aiCol[i]+1+regData, regTemp+i);
}
/* If the parent table is the same as the child table, and we are about
** to increment the constraint-counter (i.e. this is an INSERT operation),
** then check if the row being inserted matches itself. If so, do not
** increment the constraint-counter.
**
** If any of the parent-key values are NULL, then the row cannot match
** itself. So set JUMPIFNULL to make sure we do the OP_Found if any
** of the parent-key values are NULL (at this point it is known that
** none of the child key values are).
*/
if( pTab==pFKey->pFrom && nIncr==1 ){
int iJump = sqlite3VdbeCurrentAddr(v) + nCol + 1;
for(i=0; i<nCol; i++){
int iChild = aiCol[i]+1+regData;
int iParent = pIdx->aiColumn[i]+1+regData;
assert( aiCol[i]!=pTab->iPKey );
if( pIdx->aiColumn[i]==pTab->iPKey ){
/* The parent key is a composite key that includes the IPK column */
iParent = regData;
}
sqlite3VdbeAddOp3(v, OP_Ne, iChild, iJump, iParent);
sqlite3VdbeChangeP5(v, SQLITE_JUMPIFNULL);
}
sqlite3VdbeAddOp2(v, OP_Goto, 0, iOk);
}
sqlite3VdbeAddOp3(v, OP_MakeRecord, regTemp, nCol, regRec);
sqlite3VdbeChangeP4(v, -1, sqlite3IndexAffinityStr(v,pIdx), P4_TRANSIENT);
sqlite3VdbeAddOp4Int(v, OP_Found, iCur, iOk, regRec, 0);
sqlite3ReleaseTempReg(pParse, regRec);
sqlite3ReleaseTempRange(pParse, regTemp, nCol);
}
}
if( !pFKey->isDeferred && !pParse->pToplevel && !pParse->isMultiWrite ){
/* Special case: If this is an INSERT statement that will insert exactly
** one row into the table, raise a constraint immediately instead of
** incrementing a counter. This is necessary as the VM code is being
** generated for will not open a statement transaction. */
assert( nIncr==1 );
sqlite3HaltConstraint(
pParse, OE_Abort, "foreign key constraint failed", P4_STATIC
);
}else{
if( nIncr>0 && pFKey->isDeferred==0 ){
sqlite3ParseToplevel(pParse)->mayAbort = 1;
}
sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr);
}
sqlite3VdbeResolveLabel(v, iOk);
sqlite3VdbeAddOp1(v, OP_Close, iCur);
}
/*
** This routine is call to handle SQL of the following forms:
**
** insert into TABLE (IDLIST) values(EXPRLIST)
** insert into TABLE (IDLIST) select
**
** The IDLIST following the table name is always optional. If omitted,
** then a list of all columns for the table is substituted. The IDLIST
** appears in the pColumn parameter. pColumn is NULL if IDLIST is omitted.
**
** The pList parameter holds EXPRLIST in the first form of the INSERT
** statement above, and pSelect is NULL. For the second form, pList is
** NULL and pSelect is a pointer to the select statement used to generate
** data for the insert.
**
** The code generated follows one of three templates. For a simple
** select with data coming from a VALUES clause, the code executes
** once straight down through. The template looks like this:
**
** open write cursor to <table> and its indices
** puts VALUES clause expressions onto the stack
** write the resulting record into <table>
** cleanup
**
** If the statement is of the form
**
** INSERT INTO <table> SELECT ...
**
** And the SELECT clause does not read from <table> at any time, then
** the generated code follows this template:
**
** goto B
** A: setup for the SELECT
** loop over the tables in the SELECT
** gosub C
** end loop
** cleanup after the SELECT
** goto D
** B: open write cursor to <table> and its indices
** goto A
** C: insert the select result into <table>
** return
** D: cleanup
**
** The third template is used if the insert statement takes its
** values from a SELECT but the data is being inserted into a table
** that is also read as part of the SELECT. In the third form,
** we have to use a intermediate table to store the results of
** the select. The template is like this:
**
** goto B
** A: setup for the SELECT
** loop over the tables in the SELECT
** gosub C
** end loop
** cleanup after the SELECT
** goto D
** C: insert the select result into the intermediate table
** return
** B: open a cursor to an intermediate table
** goto A
** D: open write cursor to <table> and its indices
** loop over the intermediate table
** transfer values form intermediate table into <table>
** end the loop
** cleanup
*/
void sqlite3Insert(
Parse *pParse, /* Parser context */
SrcList *pTabList, /* Name of table into which we are inserting */
ExprList *pList, /* List of values to be inserted */
Select *pSelect, /* A SELECT statement to use as the data source */
IdList *pColumn, /* Column names corresponding to IDLIST. */
int onError /* How to handle constraint errors */
){
Table *pTab; /* The table to insert into */
char *zTab; /* Name of the table into which we are inserting */
const char *zDb; /* Name of the database holding this table */
int i, j, idx; /* Loop counters */
Vdbe *v; /* Generate code into this virtual machine */
Index *pIdx; /* For looping over indices of the table */
int nColumn; /* Number of columns in the data */
int base = 0; /* VDBE Cursor number for pTab */
int iCont=0,iBreak=0; /* Beginning and end of the loop over srcTab */
sqlite3 *db; /* The main database structure */
int keyColumn = -1; /* Column that is the INTEGER PRIMARY KEY */
int endOfLoop; /* Label for the end of the insertion loop */
int useTempTable = 0; /* Store SELECT results in intermediate table */
int srcTab = 0; /* Data comes from this temporary cursor if >=0 */
int iSelectLoop = 0; /* Address of code that implements the SELECT */
int iCleanup = 0; /* Address of the cleanup code */
int iInsertBlock = 0; /* Address of the subroutine used to insert data */
int iCntMem = 0; /* Memory cell used for the row counter */
int newIdx = -1; /* Cursor for the NEW table */
Db *pDb; /* The database containing table being inserted into */
int counterMem = 0; /* Memory cell holding AUTOINCREMENT counter */
int iDb;
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True if attempting to insert into a view */
int triggers_exist = 0; /* True if there are FOR EACH ROW triggers */
#endif
#ifndef SQLITE_OMIT_AUTOINCREMENT
int counterRowid = 0; /* Memory cell holding rowid of autoinc counter */
#endif
if( pParse->nErr || sqlite3MallocFailed() ){
goto insert_cleanup;
}
db = pParse->db;
/* Locate the table into which we will be inserting new information.
*/
assert( pTabList->nSrc==1 );
zTab = pTabList->a[0].zName;
if( zTab==0 ) goto insert_cleanup;
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ){
goto insert_cleanup;
}
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
assert( iDb<db->nDb );
pDb = &db->aDb[iDb];
zDb = pDb->zName;
if( sqlite3AuthCheck(pParse, SQLITE_INSERT, pTab->zName, 0, zDb) ){
goto insert_cleanup;
}
/* Figure out if we have any triggers and if the table being
** inserted into is a view
*/
#ifndef SQLITE_OMIT_TRIGGER
triggers_exist = sqlite3TriggersExist(pParse, pTab, TK_INSERT, 0);
isView = pTab->pSelect!=0;
#else
# define triggers_exist 0
# define isView 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
/* Ensure that:
* (a) the table is not read-only,
* (b) that if it is a view then ON INSERT triggers exist
*/
if( sqlite3IsReadOnly(pParse, pTab, triggers_exist) ){
goto insert_cleanup;
}
assert( pTab!=0 );
/* If pTab is really a view, make sure it has been initialized.
*/
if( isView && sqlite3ViewGetColumnNames(pParse, pTab) ){
goto insert_cleanup;
}
/* Allocate a VDBE
*/
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto insert_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, pSelect || triggers_exist, iDb);
/* if there are row triggers, allocate a temp table for new.* references. */
if( triggers_exist ){
newIdx = pParse->nTab++;
}
#ifndef SQLITE_OMIT_AUTOINCREMENT
/* If this is an AUTOINCREMENT table, look up the sequence number in the
** sqlite_sequence table and store it in memory cell counterMem. Also
** remember the rowid of the sqlite_sequence table entry in memory cell
** counterRowid.
*/
if( pTab->autoInc ){
int iCur = pParse->nTab;
int addr = sqlite3VdbeCurrentAddr(v);
counterRowid = pParse->nMem++;
counterMem = pParse->nMem++;
sqlite3OpenTable(pParse, iCur, iDb, pDb->pSchema->pSeqTab, OP_OpenRead);
sqlite3VdbeAddOp(v, OP_Rewind, iCur, addr+13);
sqlite3VdbeAddOp(v, OP_Column, iCur, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pTab->zName, 0);
sqlite3VdbeAddOp(v, OP_Ne, 0x100, addr+12);
sqlite3VdbeAddOp(v, OP_Rowid, iCur, 0);
sqlite3VdbeAddOp(v, OP_MemStore, counterRowid, 1);
sqlite3VdbeAddOp(v, OP_Column, iCur, 1);
sqlite3VdbeAddOp(v, OP_MemStore, counterMem, 1);
sqlite3VdbeAddOp(v, OP_Goto, 0, addr+13);
sqlite3VdbeAddOp(v, OP_Next, iCur, addr+4);
sqlite3VdbeAddOp(v, OP_Close, iCur, 0);
}
#endif /* SQLITE_OMIT_AUTOINCREMENT */
/* Figure out how many columns of data are supplied. If the data
** is coming from a SELECT statement, then this step also generates
** all the code to implement the SELECT statement and invoke a subroutine
** to process each row of the result. (Template 2.) If the SELECT
** statement uses the the table that is being inserted into, then the
** subroutine is also coded here. That subroutine stores the SELECT
** results in a temporary table. (Template 3.)
*/
if( pSelect ){
/* Data is coming from a SELECT. Generate code to implement that SELECT
*/
int rc, iInitCode;
iInitCode = sqlite3VdbeAddOp(v, OP_Goto, 0, 0);
iSelectLoop = sqlite3VdbeCurrentAddr(v);
iInsertBlock = sqlite3VdbeMakeLabel(v);
/* Resolve the expressions in the SELECT statement and execute it. */
rc = sqlite3Select(pParse, pSelect, SRT_Subroutine, iInsertBlock,0,0,0,0);
if( rc || pParse->nErr || sqlite3MallocFailed() ){
goto insert_cleanup;
}
iCleanup = sqlite3VdbeMakeLabel(v);
sqlite3VdbeAddOp(v, OP_Goto, 0, iCleanup);
assert( pSelect->pEList );
nColumn = pSelect->pEList->nExpr;
/* Set useTempTable to TRUE if the result of the SELECT statement
** should be written into a temporary table. Set to FALSE if each
** row of the SELECT can be written directly into the result table.
**
** A temp table must be used if the table being updated is also one
** of the tables being read by the SELECT statement. Also use a
** temp table in the case of row triggers.
*/
if( triggers_exist || selectReadsTable(pSelect,pTab->pSchema,pTab->tnum) ){
useTempTable = 1;
}
if( useTempTable ){
/* Generate the subroutine that SELECT calls to process each row of
** the result. Store the result in a temporary table
*/
srcTab = pParse->nTab++;
sqlite3VdbeResolveLabel(v, iInsertBlock);
sqlite3VdbeAddOp(v, OP_MakeRecord, nColumn, 0);
sqlite3VdbeAddOp(v, OP_NewRowid, srcTab, 0);
sqlite3VdbeAddOp(v, OP_Pull, 1, 0);
sqlite3VdbeAddOp(v, OP_Insert, srcTab, 0);
sqlite3VdbeAddOp(v, OP_Return, 0, 0);
/* The following code runs first because the GOTO at the very top
** of the program jumps to it. Create the temporary table, then jump
** back up and execute the SELECT code above.
*/
sqlite3VdbeJumpHere(v, iInitCode);
sqlite3VdbeAddOp(v, OP_OpenVirtual, srcTab, 0);
sqlite3VdbeAddOp(v, OP_SetNumColumns, srcTab, nColumn);
sqlite3VdbeAddOp(v, OP_Goto, 0, iSelectLoop);
sqlite3VdbeResolveLabel(v, iCleanup);
}else{
sqlite3VdbeJumpHere(v, iInitCode);
}
}else{
/* This is the case if the data for the INSERT is coming from a VALUES
** clause
*/
NameContext sNC;
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
assert( pList!=0 );
srcTab = -1;
useTempTable = 0;
assert( pList );
nColumn = pList->nExpr;
for(i=0; i<nColumn; i++){
if( sqlite3ExprResolveNames(&sNC, pList->a[i].pExpr) ){
goto insert_cleanup;
}
}
}
/* Make sure the number of columns in the source data matches the number
** of columns to be inserted into the table.
*/
if( pColumn==0 && nColumn!=pTab->nCol ){
sqlite3ErrorMsg(pParse,
"table %S has %d columns but %d values were supplied",
pTabList, 0, pTab->nCol, nColumn);
goto insert_cleanup;
}
if( pColumn!=0 && nColumn!=pColumn->nId ){
sqlite3ErrorMsg(pParse, "%d values for %d columns", nColumn, pColumn->nId);
goto insert_cleanup;
}
/* If the INSERT statement included an IDLIST term, then make sure
** all elements of the IDLIST really are columns of the table and
** remember the column indices.
**
** If the table has an INTEGER PRIMARY KEY column and that column
** is named in the IDLIST, then record in the keyColumn variable
** the index into IDLIST of the primary key column. keyColumn is
** the index of the primary key as it appears in IDLIST, not as
** is appears in the original table. (The index of the primary
** key in the original table is pTab->iPKey.)
*/
if( pColumn ){
for(i=0; i<pColumn->nId; i++){
pColumn->a[i].idx = -1;
}
for(i=0; i<pColumn->nId; i++){
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pColumn->a[i].zName, pTab->aCol[j].zName)==0 ){
pColumn->a[i].idx = j;
if( j==pTab->iPKey ){
keyColumn = i;
}
break;
}
}
if( j>=pTab->nCol ){
if( sqlite3IsRowid(pColumn->a[i].zName) ){
keyColumn = i;
}else{
sqlite3ErrorMsg(pParse, "table %S has no column named %s",
pTabList, 0, pColumn->a[i].zName);
pParse->nErr++;
goto insert_cleanup;
}
}
}
}
/* If there is no IDLIST term but the table has an integer primary
** key, the set the keyColumn variable to the primary key column index
** in the original table definition.
*/
if( pColumn==0 ){
keyColumn = pTab->iPKey;
}
/* Open the temp table for FOR EACH ROW triggers
*/
if( triggers_exist ){
sqlite3VdbeAddOp(v, OP_OpenPseudo, newIdx, 0);
sqlite3VdbeAddOp(v, OP_SetNumColumns, newIdx, pTab->nCol);
}
/* Initialize the count of rows to be inserted
*/
if( db->flags & SQLITE_CountRows ){
iCntMem = pParse->nMem++;
sqlite3VdbeAddOp(v, OP_MemInt, 0, iCntMem);
}
/* Open tables and indices if there are no row triggers */
if( !triggers_exist ){
base = pParse->nTab;
sqlite3OpenTableAndIndices(pParse, pTab, base, OP_OpenWrite);
}
/* If the data source is a temporary table, then we have to create
** a loop because there might be multiple rows of data. If the data
** source is a subroutine call from the SELECT statement, then we need
** to launch the SELECT statement processing.
*/
if( useTempTable ){
iBreak = sqlite3VdbeMakeLabel(v);
sqlite3VdbeAddOp(v, OP_Rewind, srcTab, iBreak);
iCont = sqlite3VdbeCurrentAddr(v);
}else if( pSelect ){
sqlite3VdbeAddOp(v, OP_Goto, 0, iSelectLoop);
sqlite3VdbeResolveLabel(v, iInsertBlock);
}
/* Run the BEFORE and INSTEAD OF triggers, if there are any
*/
endOfLoop = sqlite3VdbeMakeLabel(v);
if( triggers_exist & TRIGGER_BEFORE ){
/* build the NEW.* reference row. Note that if there is an INTEGER
** PRIMARY KEY into which a NULL is being inserted, that NULL will be
** translated into a unique ID for the row. But on a BEFORE trigger,
** we do not know what the unique ID will be (because the insert has
** not happened yet) so we substitute a rowid of -1
*/
if( keyColumn<0 ){
sqlite3VdbeAddOp(v, OP_Integer, -1, 0);
}else if( useTempTable ){
sqlite3VdbeAddOp(v, OP_Column, srcTab, keyColumn);
}else{
assert( pSelect==0 ); /* Otherwise useTempTable is true */
sqlite3ExprCode(pParse, pList->a[keyColumn].pExpr);
sqlite3VdbeAddOp(v, OP_NotNull, -1, sqlite3VdbeCurrentAddr(v)+3);
sqlite3VdbeAddOp(v, OP_Pop, 1, 0);
sqlite3VdbeAddOp(v, OP_Integer, -1, 0);
sqlite3VdbeAddOp(v, OP_MustBeInt, 0, 0);
}
/* Create the new column data
*/
for(i=0; i<pTab->nCol; i++){
if( pColumn==0 ){
j = i;
}else{
for(j=0; j<pColumn->nId; j++){
if( pColumn->a[j].idx==i ) break;
}
}
if( pColumn && j>=pColumn->nId ){
sqlite3ExprCode(pParse, pTab->aCol[i].pDflt);
}else if( useTempTable ){
sqlite3VdbeAddOp(v, OP_Column, srcTab, j);
}else{
assert( pSelect==0 ); /* Otherwise useTempTable is true */
sqlite3ExprCodeAndCache(pParse, pList->a[j].pExpr);
}
}
sqlite3VdbeAddOp(v, OP_MakeRecord, pTab->nCol, 0);
/* If this is an INSERT on a view with an INSTEAD OF INSERT trigger,
** do not attempt any conversions before assembling the record.
** If this is a real table, attempt conversions as required by the
** table column affinities.
*/
if( !isView ){
sqlite3TableAffinityStr(v, pTab);
}
sqlite3VdbeAddOp(v, OP_Insert, newIdx, 0);
/* Fire BEFORE or INSTEAD OF triggers */
if( sqlite3CodeRowTrigger(pParse, TK_INSERT, 0, TRIGGER_BEFORE, pTab,
newIdx, -1, onError, endOfLoop) ){
goto insert_cleanup;
}
}
/* If any triggers exists, the opening of tables and indices is deferred
** until now.
*/
if( triggers_exist && !isView ){
base = pParse->nTab;
sqlite3OpenTableAndIndices(pParse, pTab, base, OP_OpenWrite);
}
/* Push the record number for the new entry onto the stack. The
** record number is a randomly generate integer created by NewRowid
** except when the table has an INTEGER PRIMARY KEY column, in which
** case the record number is the same as that column.
*/
if( !isView ){
if( keyColumn>=0 ){
if( useTempTable ){
sqlite3VdbeAddOp(v, OP_Column, srcTab, keyColumn);
}else if( pSelect ){
sqlite3VdbeAddOp(v, OP_Dup, nColumn - keyColumn - 1, 1);
}else{
sqlite3ExprCode(pParse, pList->a[keyColumn].pExpr);
}
/* If the PRIMARY KEY expression is NULL, then use OP_NewRowid
** to generate a unique primary key value.
*/
sqlite3VdbeAddOp(v, OP_NotNull, -1, sqlite3VdbeCurrentAddr(v)+3);
sqlite3VdbeAddOp(v, OP_Pop, 1, 0);
sqlite3VdbeAddOp(v, OP_NewRowid, base, counterMem);
sqlite3VdbeAddOp(v, OP_MustBeInt, 0, 0);
}else{
sqlite3VdbeAddOp(v, OP_NewRowid, base, counterMem);
}
#ifndef SQLITE_OMIT_AUTOINCREMENT
if( pTab->autoInc ){
sqlite3VdbeAddOp(v, OP_MemMax, counterMem, 0);
}
#endif /* SQLITE_OMIT_AUTOINCREMENT */
/* Push onto the stack, data for all columns of the new entry, beginning
** with the first column.
*/
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
/* The value of the INTEGER PRIMARY KEY column is always a NULL.
** Whenever this column is read, the record number will be substituted
** in its place. So will fill this column with a NULL to avoid
** taking up data space with information that will never be used. */
sqlite3VdbeAddOp(v, OP_Null, 0, 0);
continue;
}
if( pColumn==0 ){
j = i;
}else{
for(j=0; j<pColumn->nId; j++){
if( pColumn->a[j].idx==i ) break;
}
}
if( pColumn && j>=pColumn->nId ){
sqlite3ExprCode(pParse, pTab->aCol[i].pDflt);
}else if( useTempTable ){
sqlite3VdbeAddOp(v, OP_Column, srcTab, j);
}else if( pSelect ){
sqlite3VdbeAddOp(v, OP_Dup, i+nColumn-j, 1);
}else{
sqlite3ExprCode(pParse, pList->a[j].pExpr);
}
}
/* Generate code to check constraints and generate index keys and
** do the insertion.
*/
sqlite3GenerateConstraintChecks(pParse, pTab, base, 0, keyColumn>=0,
0, onError, endOfLoop);
sqlite3CompleteInsertion(pParse, pTab, base, 0,0,0,
(triggers_exist & TRIGGER_AFTER)!=0 ? newIdx : -1);
}
/* Update the count of rows that are inserted
*/
if( (db->flags & SQLITE_CountRows)!=0 ){
sqlite3VdbeAddOp(v, OP_MemIncr, 1, iCntMem);
}
if( triggers_exist ){
/* Close all tables opened */
if( !isView ){
sqlite3VdbeAddOp(v, OP_Close, base, 0);
for(idx=1, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, idx++){
sqlite3VdbeAddOp(v, OP_Close, idx+base, 0);
}
}
/* Code AFTER triggers */
if( sqlite3CodeRowTrigger(pParse, TK_INSERT, 0, TRIGGER_AFTER, pTab,
newIdx, -1, onError, endOfLoop) ){
goto insert_cleanup;
}
}
/* The bottom of the loop, if the data source is a SELECT statement
*/
sqlite3VdbeResolveLabel(v, endOfLoop);
if( useTempTable ){
sqlite3VdbeAddOp(v, OP_Next, srcTab, iCont);
sqlite3VdbeResolveLabel(v, iBreak);
sqlite3VdbeAddOp(v, OP_Close, srcTab, 0);
}else if( pSelect ){
sqlite3VdbeAddOp(v, OP_Pop, nColumn, 0);
sqlite3VdbeAddOp(v, OP_Return, 0, 0);
sqlite3VdbeResolveLabel(v, iCleanup);
}
if( !triggers_exist ){
/* Close all tables opened */
sqlite3VdbeAddOp(v, OP_Close, base, 0);
for(idx=1, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, idx++){
sqlite3VdbeAddOp(v, OP_Close, idx+base, 0);
}
}
#ifndef SQLITE_OMIT_AUTOINCREMENT
/* Update the sqlite_sequence table by storing the content of the
** counter value in memory counterMem back into the sqlite_sequence
** table.
*/
if( pTab->autoInc ){
int iCur = pParse->nTab;
int addr = sqlite3VdbeCurrentAddr(v);
sqlite3OpenTable(pParse, iCur, iDb, pDb->pSchema->pSeqTab, OP_OpenWrite);
sqlite3VdbeAddOp(v, OP_MemLoad, counterRowid, 0);
sqlite3VdbeAddOp(v, OP_NotNull, -1, addr+7);
sqlite3VdbeAddOp(v, OP_Pop, 1, 0);
sqlite3VdbeAddOp(v, OP_NewRowid, iCur, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pTab->zName, 0);
sqlite3VdbeAddOp(v, OP_MemLoad, counterMem, 0);
sqlite3VdbeAddOp(v, OP_MakeRecord, 2, 0);
sqlite3VdbeAddOp(v, OP_Insert, iCur, 0);
sqlite3VdbeAddOp(v, OP_Close, iCur, 0);
}
#endif
/*
** Return the number of rows inserted. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( db->flags & SQLITE_CountRows && pParse->nested==0 && !pParse->trigStack ){
sqlite3VdbeAddOp(v, OP_MemLoad, iCntMem, 0);
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows inserted", P3_STATIC);
}
insert_cleanup:
sqlite3SrcListDelete(pTabList);
sqlite3ExprListDelete(pList);
sqlite3SelectDelete(pSelect);
sqlite3IdListDelete(pColumn);
}
/*
** This function is called to generate code executed when a row is deleted
** from the parent table of foreign key constraint pFKey and, if pFKey is
** deferred, when a row is inserted into the same table. When generating
** code for an SQL UPDATE operation, this function may be called twice -
** once to "delete" the old row and once to "insert" the new row.
**
** The code generated by this function scans through the rows in the child
** table that correspond to the parent table row being deleted or inserted.
** For each child row found, one of the following actions is taken:
**
** Operation | FK type | Action taken
** --------------------------------------------------------------------------
** DELETE immediate Increment the "immediate constraint counter".
** Or, if the ON (UPDATE|DELETE) action is RESTRICT,
** throw a "foreign key constraint failed" exception.
**
** INSERT immediate Decrement the "immediate constraint counter".
**
** DELETE deferred Increment the "deferred constraint counter".
** Or, if the ON (UPDATE|DELETE) action is RESTRICT,
** throw a "foreign key constraint failed" exception.
**
** INSERT deferred Decrement the "deferred constraint counter".
**
** These operations are identified in the comment at the top of this file
** (fkey.c) as "I.2" and "D.2".
*/
static void fkScanChildren(
Parse *pParse, /* Parse context */
SrcList *pSrc, /* SrcList containing the table to scan */
Table *pTab,
Index *pIdx, /* Foreign key index */
FKey *pFKey, /* Foreign key relationship */
int *aiCol, /* Map from pIdx cols to child table cols */
int regData, /* Referenced table data starts here */
int nIncr /* Amount to increment deferred counter by */
){
sqlite3 *db = pParse->db; /* Database handle */
int i; /* Iterator variable */
Expr *pWhere = 0; /* WHERE clause to scan with */
NameContext sNameContext; /* Context used to resolve WHERE clause */
WhereInfo *pWInfo; /* Context used by sqlite3WhereXXX() */
int iFkIfZero = 0; /* Address of OP_FkIfZero */
Vdbe *v = sqlite3GetVdbe(pParse);
assert( !pIdx || pIdx->pTable==pTab );
if( nIncr<0 ){
iFkIfZero = sqlite3VdbeAddOp2(v, OP_FkIfZero, pFKey->isDeferred, 0);
}
/* Create an Expr object representing an SQL expression like:
**
** <parent-key1> = <child-key1> AND <parent-key2> = <child-key2> ...
**
** The collation sequence used for the comparison should be that of
** the parent key columns. The affinity of the parent key column should
** be applied to each child key value before the comparison takes place.
*/
for(i=0; i<pFKey->nCol; i++){
Expr *pLeft; /* Value from parent table row */
Expr *pRight; /* Column ref to child table */
Expr *pEq; /* Expression (pLeft = pRight) */
int iCol; /* Index of column in child table */
const char *zCol; /* Name of column in child table */
pLeft = sqlite3Expr(db, TK_REGISTER, 0);
if( pLeft ){
/* Set the collation sequence and affinity of the LHS of each TK_EQ
** expression to the parent key column defaults. */
if( pIdx ){
Column *pCol;
iCol = pIdx->aiColumn[i];
pCol = &pTab->aCol[iCol];
if( pTab->iPKey==iCol ) iCol = -1;
pLeft->iTable = regData+iCol+1;
pLeft->affinity = pCol->affinity;
pLeft->pColl = sqlite3LocateCollSeq(pParse, pCol->zColl);
}else{
pLeft->iTable = regData;
pLeft->affinity = SQLITE_AFF_INTEGER;
}
}
iCol = aiCol ? aiCol[i] : pFKey->aCol[0].iFrom;
assert( iCol>=0 );
zCol = pFKey->pFrom->aCol[iCol].zName;
pRight = sqlite3Expr(db, TK_ID, zCol);
pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight, 0);
pWhere = sqlite3ExprAnd(db, pWhere, pEq);
}
/* If the child table is the same as the parent table, and this scan
** is taking place as part of a DELETE operation (operation D.2), omit the
** row being deleted from the scan by adding ($rowid != rowid) to the WHERE
** clause, where $rowid is the rowid of the row being deleted. */
if( pTab==pFKey->pFrom && nIncr>0 ){
Expr *pEq; /* Expression (pLeft = pRight) */
Expr *pLeft; /* Value from parent table row */
Expr *pRight; /* Column ref to child table */
pLeft = sqlite3Expr(db, TK_REGISTER, 0);
pRight = sqlite3Expr(db, TK_COLUMN, 0);
if( pLeft && pRight ){
pLeft->iTable = regData;
pLeft->affinity = SQLITE_AFF_INTEGER;
pRight->iTable = pSrc->a[0].iCursor;
pRight->iColumn = -1;
}
pEq = sqlite3PExpr(pParse, TK_NE, pLeft, pRight, 0);
pWhere = sqlite3ExprAnd(db, pWhere, pEq);
}
/* Resolve the references in the WHERE clause. */
memset(&sNameContext, 0, sizeof(NameContext));
sNameContext.pSrcList = pSrc;
sNameContext.pParse = pParse;
sqlite3ResolveExprNames(&sNameContext, pWhere);
/* Create VDBE to loop through the entries in pSrc that match the WHERE
** clause. If the constraint is not deferred, throw an exception for
** each row found. Otherwise, for deferred constraints, increment the
** deferred constraint counter by nIncr for each row selected. */
pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0, 0, 0);
if( nIncr>0 && pFKey->isDeferred==0 ){
sqlite3ParseToplevel(pParse)->mayAbort = 1;
}
sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr);
if( pWInfo ){
sqlite3WhereEnd(pWInfo);
}
/* Clean up the WHERE clause constructed above. */
sqlite3ExprDelete(db, pWhere);
if( iFkIfZero ){
sqlite3VdbeJumpHere(v, iFkIfZero);
}
}
/*
** Process an UPDATE statement.
**
** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL;
** \_______/ \________/ \______/ \________________/
* onError pTabList pChanges pWhere
*/
void sqlite3Update(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table in which we should change things */
ExprList *pChanges, /* Things to be changed */
Expr *pWhere, /* The WHERE clause. May be null */
int onError /* How to handle constraint errors */
){
int i, j; /* Loop counters */
Table *pTab; /* The table to be updated */
int addr = 0; /* VDBE instruction address of the start of the loop */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Vdbe *v; /* The virtual database engine */
Index *pIdx; /* For looping over indices */
int nIdx; /* Number of indices that need updating */
int iCur; /* VDBE Cursor number of pTab */
sqlite3 *db; /* The database structure */
int *aRegIdx = 0; /* One register assigned to each index to be updated */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
int chngRowid; /* True if the record number is being changed */
Expr *pRowidExpr = 0; /* Expression defining the new record number */
int openAll = 0; /* True if all indices need to be opened */
AuthContext sContext; /* The authorization context */
NameContext sNC; /* The name-context to resolve expressions in */
int iDb; /* Database containing the table being updated */
int j1; /* Addresses of jump instructions */
int okOnePass; /* True for one-pass algorithm without the FIFO */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* Trying to update a view */
int triggers_exist = 0; /* True if any row triggers exist */
#endif
int iBeginAfterTrigger = 0; /* Address of after trigger program */
int iEndAfterTrigger = 0; /* Exit of after trigger program */
int iBeginBeforeTrigger = 0; /* Address of before trigger program */
int iEndBeforeTrigger = 0; /* Exit of before trigger program */
u32 old_col_mask = 0; /* Mask of OLD.* columns in use */
u32 new_col_mask = 0; /* Mask of NEW.* columns in use */
int newIdx = -1; /* index of trigger "new" temp table */
int oldIdx = -1; /* index of trigger "old" temp table */
/* Register Allocations */
int regRowCount = 0; /* A count of rows changed */
int regOldRowid; /* The old rowid */
int regNewRowid; /* The new rowid */
int regData; /* New data for the row */
int regRowSet = 0; /* Rowset of rows to be updated */
sContext.pParse = 0;
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto update_cleanup;
}
assert( pTabList->nSrc==1 );
/* Locate the table which we want to update.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto update_cleanup;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
/* Figure out if we have any triggers and if the table being
** updated is a view
*/
#ifndef SQLITE_OMIT_TRIGGER
triggers_exist = sqlite3TriggersExist(pTab, TK_UPDATE, pChanges);
isView = pTab->pSelect!=0;
#else
# define triggers_exist 0
# define isView 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
if( sqlite3IsReadOnly(pParse, pTab, triggers_exist) ){
goto update_cleanup;
}
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
aXRef = sqlite3DbMallocRaw(db, sizeof(int) * pTab->nCol );
if( aXRef==0 ) goto update_cleanup;
for(i=0; i<pTab->nCol; i++) aXRef[i] = -1;
/* If there are FOR EACH ROW triggers, allocate cursors for the
** special OLD and NEW tables
*/
if( triggers_exist ){
newIdx = pParse->nTab++;
oldIdx = pParse->nTab++;
}
/* Allocate a cursors for the main database table and for all indices.
** The index cursors might not be used, but if they are used they
** need to occur right after the database cursor. So go ahead and
** allocate enough space, just in case.
*/
pTabList->a[0].iCursor = iCur = pParse->nTab++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
pParse->nTab++;
}
/* Initialize the name-context */
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
/* Resolve the column names in all the expressions of the
** of the UPDATE statement. Also find the column index
** for each column to be updated in the pChanges array. For each
** column to be updated, make sure we have authorization to change
** that column.
*/
chngRowid = 0;
for(i=0; i<pChanges->nExpr; i++){
if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){
goto update_cleanup;
}
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){
if( j==pTab->iPKey ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}
aXRef[j] = i;
break;
}
}
if( j>=pTab->nCol ){
if( sqlite3IsRowid(pChanges->a[i].zName) ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else{
sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName);
goto update_cleanup;
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
pTab->aCol[j].zName, db->aDb[iDb].zName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
aXRef[j] = -1;
}
}
#endif
}
/* Allocate memory for the array aRegIdx[]. There is one entry in the
** array for each index associated with table being updated. Fill in
** the value with a register number for indices that are to be used
** and with zero for unused indices.
*/
for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){}
if( nIdx>0 ){
aRegIdx = sqlite3DbMallocRaw(db, sizeof(Index*) * nIdx );
if( aRegIdx==0 ) goto update_cleanup;
}
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int reg;
if( chngRowid ){
reg = ++pParse->nMem;
}else{
reg = 0;
for(i=0; i<pIdx->nColumn; i++){
if( aXRef[pIdx->aiColumn[i]]>=0 ){
reg = ++pParse->nMem;
break;
}
}
}
aRegIdx[j] = reg;
}
/* Allocate a block of register used to store the change record
** sent to sqlite3GenerateConstraintChecks(). There are either
** one or two registers for holding the rowid. One rowid register
** is used if chngRowid is false and two are used if chngRowid is
** true. Following these are pTab->nCol register holding column
** data.
*/
regOldRowid = regNewRowid = pParse->nMem + 1;
pParse->nMem += pTab->nCol + 1;
if( chngRowid ){
regNewRowid++;
pParse->nMem++;
}
regData = regNewRowid+1;
/* Begin generating code.
*/
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto update_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, 1, iDb);
#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Virtual tables must be handled separately */
if( IsVirtual(pTab) ){
updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef,
pWhere);
pWhere = 0;
pTabList = 0;
goto update_cleanup;
}
#endif
/* Start the view context
*/
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* Generate the code for triggers.
*/
if( triggers_exist ){
int iGoto;
/* Create pseudo-tables for NEW and OLD
*/
sqlite3VdbeAddOp2(v, OP_SetNumColumns, 0, pTab->nCol);
sqlite3VdbeAddOp2(v, OP_OpenPseudo, oldIdx, 0);
sqlite3VdbeAddOp2(v, OP_SetNumColumns, 0, pTab->nCol);
sqlite3VdbeAddOp2(v, OP_OpenPseudo, newIdx, 0);
iGoto = sqlite3VdbeAddOp2(v, OP_Goto, 0, 0);
addr = sqlite3VdbeMakeLabel(v);
iBeginBeforeTrigger = sqlite3VdbeCurrentAddr(v);
if( sqlite3CodeRowTrigger(pParse, TK_UPDATE, pChanges, TRIGGER_BEFORE, pTab,
newIdx, oldIdx, onError, addr, &old_col_mask, &new_col_mask) ){
goto update_cleanup;
}
iEndBeforeTrigger = sqlite3VdbeAddOp2(v, OP_Goto, 0, 0);
iBeginAfterTrigger = sqlite3VdbeCurrentAddr(v);
if( sqlite3CodeRowTrigger(pParse, TK_UPDATE, pChanges, TRIGGER_AFTER, pTab,
newIdx, oldIdx, onError, addr, &old_col_mask, &new_col_mask) ){
goto update_cleanup;
}
iEndAfterTrigger = sqlite3VdbeAddOp2(v, OP_Goto, 0, 0);
sqlite3VdbeJumpHere(v, iGoto);
}
/* If we are trying to update a view, realize that view into
** a ephemeral table.
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab, pWhere, iCur);
}
#endif
/* Resolve the column names in all the expressions in the
** WHERE clause.
*/
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto update_cleanup;
}
/* Begin the database scan
*/
sqlite3VdbeAddOp2(v, OP_Null, 0, regOldRowid);
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0,
WHERE_ONEPASS_DESIRED, 0);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = pWInfo->okOnePass;
/* Remember the rowid of every item to be updated.
*/
sqlite3VdbeAddOp2(v, IsVirtual(pTab)?OP_VRowid:OP_Rowid, iCur, regOldRowid);
if( !okOnePass ){
regRowSet = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
}
/* End the database scan loop.
*/
sqlite3WhereEnd(pWInfo);
/* Initialize the count of updated rows
*/
if( db->flags & SQLITE_CountRows && !pParse->trigStack ){
regRowCount = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
}
if( !isView && !IsVirtual(pTab) ){
/*
** Open every index that needs updating. Note that if any
** index could potentially invoke a REPLACE conflict resolution
** action, then we need to open all indices because we might need
** to be deleting some records.
*/
if( !okOnePass ) sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenWrite);
if( onError==OE_Replace ){
openAll = 1;
}else{
openAll = 0;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
if( pIdx->onError==OE_Replace ){
openAll = 1;
break;
}
}
}
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aRegIdx[i]>0 ){
KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx);
sqlite3VdbeAddOp4(v, OP_OpenWrite, iCur+i+1, pIdx->tnum, iDb,
(char*)pKey, P4_KEYINFO_HANDOFF);
assert( pParse->nTab>iCur+i+1 );
}
}
}
/* Jump back to this point if a trigger encounters an IGNORE constraint. */
if( triggers_exist ){
sqlite3VdbeResolveLabel(v, addr);
}
/* Top of the update loop */
if( okOnePass ){
int a1 = sqlite3VdbeAddOp1(v, OP_NotNull, regOldRowid);
addr = sqlite3VdbeAddOp0(v, OP_Goto);
sqlite3VdbeJumpHere(v, a1);
}else{
addr = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, 0, regOldRowid);
}
if( triggers_exist ){
int regRowid;
int regRow;
int regCols;
/* Make cursor iCur point to the record that is being updated.
*/
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, regOldRowid);
/* Generate the OLD table
*/
regRowid = sqlite3GetTempReg(pParse);
regRow = sqlite3GetTempReg(pParse);
sqlite3VdbeAddOp2(v, OP_Rowid, iCur, regRowid);
if( !old_col_mask ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regRow);
}else{
sqlite3VdbeAddOp2(v, OP_RowData, iCur, regRow);
}
sqlite3VdbeAddOp3(v, OP_Insert, oldIdx, regRow, regRowid);
/* Generate the NEW table
*/
if( chngRowid ){
sqlite3ExprCodeAndCache(pParse, pRowidExpr, regRowid);
sqlite3VdbeAddOp1(v, OP_MustBeInt, regRowid);
}else{
sqlite3VdbeAddOp2(v, OP_Rowid, iCur, regRowid);
}
regCols = sqlite3GetTempRange(pParse, pTab->nCol);
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regCols+i);
continue;
}
j = aXRef[i];
if( new_col_mask&((u32)1<<i) || new_col_mask==0xffffffff ){
if( j<0 ){
sqlite3VdbeAddOp3(v, OP_Column, iCur, i, regCols+i);
sqlite3ColumnDefault(v, pTab, i);
}else{
sqlite3ExprCodeAndCache(pParse, pChanges->a[j].pExpr, regCols+i);
}
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regCols+i);
}
}
sqlite3VdbeAddOp3(v, OP_MakeRecord, regCols, pTab->nCol, regRow);
if( !isView ){
sqlite3TableAffinityStr(v, pTab);
sqlite3ExprCacheAffinityChange(pParse, regCols, pTab->nCol);
}
sqlite3ReleaseTempRange(pParse, regCols, pTab->nCol);
/* if( pParse->nErr ) goto update_cleanup; */
sqlite3VdbeAddOp3(v, OP_Insert, newIdx, regRow, regRowid);
sqlite3ReleaseTempReg(pParse, regRowid);
sqlite3ReleaseTempReg(pParse, regRow);
sqlite3VdbeAddOp2(v, OP_Goto, 0, iBeginBeforeTrigger);
sqlite3VdbeJumpHere(v, iEndBeforeTrigger);
}
if( !isView && !IsVirtual(pTab) ){
/* Loop over every record that needs updating. We have to load
** the old data for each record to be updated because some columns
** might not change and we will need to copy the old value.
** Also, the old data is needed to delete the old index entries.
** So make the cursor point at the old record.
*/
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, regOldRowid);
/* If the record number will change, push the record number as it
** will be after the update. (The old record number is currently
** on top of the stack.)
*/
if( chngRowid ){
sqlite3ExprCode(pParse, pRowidExpr, regNewRowid);
sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid);
}
/* Compute new data for this record.
*/
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regData+i);
continue;
}
j = aXRef[i];
if( j<0 ){
sqlite3VdbeAddOp3(v, OP_Column, iCur, i, regData+i);
sqlite3ColumnDefault(v, pTab, i);
}else{
sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regData+i);
}
}
/* Do constraint checks
*/
sqlite3GenerateConstraintChecks(pParse, pTab, iCur, regNewRowid,
aRegIdx, chngRowid, 1,
onError, addr);
/* Delete the old indices for the current record.
*/
j1 = sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, regOldRowid);
sqlite3GenerateRowIndexDelete(pParse, pTab, iCur, aRegIdx);
/* If changing the record number, delete the old record.
*/
if( chngRowid ){
sqlite3VdbeAddOp2(v, OP_Delete, iCur, 0);
}
sqlite3VdbeJumpHere(v, j1);
/* Create the new index entries and the new record.
*/
sqlite3CompleteInsertion(pParse, pTab, iCur, regNewRowid,
aRegIdx, 1, -1, 0);
}
/* Increment the row counter
*/
if( db->flags & SQLITE_CountRows && !pParse->trigStack){
sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1);
}
/* If there are triggers, close all the cursors after each iteration
** through the loop. The fire the after triggers.
*/
if( triggers_exist ){
sqlite3VdbeAddOp2(v, OP_Goto, 0, iBeginAfterTrigger);
sqlite3VdbeJumpHere(v, iEndAfterTrigger);
}
/* Repeat the above with the next record to be updated, until
** all record selected by the WHERE clause have been updated.
*/
sqlite3VdbeAddOp2(v, OP_Goto, 0, addr);
sqlite3VdbeJumpHere(v, addr);
/* Close all tables */
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
if( openAll || aRegIdx[i]>0 ){
sqlite3VdbeAddOp2(v, OP_Close, iCur+i+1, 0);
}
}
sqlite3VdbeAddOp2(v, OP_Close, iCur, 0);
if( triggers_exist ){
sqlite3VdbeAddOp2(v, OP_Close, newIdx, 0);
sqlite3VdbeAddOp2(v, OP_Close, oldIdx, 0);
}
/*
** Return the number of rows that were changed. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( db->flags & SQLITE_CountRows && !pParse->trigStack && pParse->nested==0 ){
sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC);
}
update_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3DbFree(db, aRegIdx);
sqlite3DbFree(db, aXRef);
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprListDelete(db, pChanges);
sqlite3ExprDelete(db, pWhere);
return;
}
/*
** Generate code for an UPDATE of a virtual table.
**
** The strategy is that we create an ephemerial table that contains
** for each row to be changed:
**
** (A) The original rowid of that row.
** (B) The revised rowid for the row. (note1)
** (C) The content of every column in the row.
**
** Then we loop over this ephemeral table and for each row in
** the ephermeral table call VUpdate.
**
** When finished, drop the ephemeral table.
**
** (note1) Actually, if we know in advance that (A) is always the same
** as (B) we only store (A), then duplicate (A) when pulling
** it out of the ephemeral table before calling VUpdate.
*/
static void updateVirtualTable(
Parse *pParse, /* The parsing context */
SrcList *pSrc, /* The virtual table to be modified */
Table *pTab, /* The virtual table */
ExprList *pChanges, /* The columns to change in the UPDATE statement */
Expr *pRowid, /* Expression used to recompute the rowid */
int *aXRef, /* Mapping from columns of pTab to entries in pChanges */
Expr *pWhere /* WHERE clause of the UPDATE statement */
){
Vdbe *v = pParse->pVdbe; /* Virtual machine under construction */
ExprList *pEList = 0; /* The result set of the SELECT statement */
Select *pSelect = 0; /* The SELECT statement */
Expr *pExpr; /* Temporary expression */
int ephemTab; /* Table holding the result of the SELECT */
int i; /* Loop counter */
int addr; /* Address of top of loop */
int iReg; /* First register in set passed to OP_VUpdate */
sqlite3 *db = pParse->db; /* Database connection */
const char *pVTab = (const char*)sqlite3GetVTable(db, pTab);
SelectDest dest;
/* Construct the SELECT statement that will find the new values for
** all updated rows.
*/
pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ID, "_rowid_"));
if( pRowid ){
pEList = sqlite3ExprListAppend(pParse, pEList,
sqlite3ExprDup(db, pRowid, 0));
}
assert( pTab->iPKey<0 );
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]>=0 ){
pExpr = sqlite3ExprDup(db, pChanges->a[aXRef[i]].pExpr, 0);
}else{
pExpr = sqlite3Expr(db, TK_ID, pTab->aCol[i].zName);
}
pEList = sqlite3ExprListAppend(pParse, pEList, pExpr);
}
pSelect = sqlite3SelectNew(pParse, pEList, pSrc, pWhere, 0, 0, 0, 0, 0, 0);
/* Create the ephemeral table into which the update results will
** be stored.
*/
assert( v );
ephemTab = pParse->nTab++;
sqlite3VdbeAddOp2(v, OP_OpenEphemeral, ephemTab, pTab->nCol+1+(pRowid!=0));
sqlite3VdbeChangeP5(v, BTREE_UNORDERED);
/* fill the ephemeral table
*/
sqlite3SelectDestInit(&dest, SRT_Table, ephemTab);
sqlite3Select(pParse, pSelect, &dest);
/* Generate code to scan the ephemeral table and call VUpdate. */
iReg = ++pParse->nMem;
pParse->nMem += pTab->nCol+1;
addr = sqlite3VdbeAddOp2(v, OP_Rewind, ephemTab, 0);
sqlite3VdbeAddOp3(v, OP_Column, ephemTab, 0, iReg);
sqlite3VdbeAddOp3(v, OP_Column, ephemTab, (pRowid?1:0), iReg+1);
for(i=0; i<pTab->nCol; i++){
sqlite3VdbeAddOp3(v, OP_Column, ephemTab, i+1+(pRowid!=0), iReg+2+i);
}
sqlite3VtabMakeWritable(pParse, pTab);
sqlite3VdbeAddOp4(v, OP_VUpdate, 0, pTab->nCol+2, iReg, pVTab, P4_VTAB);
sqlite3MayAbort(pParse);
sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1);
sqlite3VdbeJumpHere(v, addr);
sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0);
/* Cleanup */
sqlite3SelectDelete(db, pSelect);
}
/*
** Generate code for a DELETE FROM statement.
**
** DELETE FROM table_wxyz WHERE a<5 AND b NOT NULL;
** \________/ \________________/
** pTabList pWhere
*/
void sqlite3DeleteFrom(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table from which we should delete things */
Expr *pWhere /* The WHERE clause. May be null */
){
Vdbe *v; /* The virtual database engine */
Table *pTab; /* The table from which records will be deleted */
int i; /* Loop counter */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Index *pIdx; /* For looping over indices of the table */
int iTabCur; /* Cursor number for the table */
int iDataCur = 0; /* VDBE cursor for the canonical data source */
int iIdxCur = 0; /* Cursor number of the first index */
int nIdx; /* Number of indices */
sqlite3 *db; /* Main database structure */
AuthContext sContext; /* Authorization context */
NameContext sNC; /* Name context to resolve expressions in */
int iDb; /* Database number */
int memCnt = -1; /* Memory cell used for change counting */
int rcauth; /* Value returned by authorization callback */
int eOnePass; /* ONEPASS_OFF or _SINGLE or _MULTI */
int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */
u8 *aToOpen = 0; /* Open cursor iTabCur+j if aToOpen[j] is true */
Index *pPk; /* The PRIMARY KEY index on the table */
int iPk = 0; /* First of nPk registers holding PRIMARY KEY value */
i16 nPk = 1; /* Number of columns in the PRIMARY KEY */
int iKey; /* Memory cell holding key of row to be deleted */
i16 nKey; /* Number of memory cells in the row key */
int iEphCur = 0; /* Ephemeral table holding all primary key values */
int iRowSet = 0; /* Register for rowset of rows to delete */
int addrBypass = 0; /* Address of jump over the delete logic */
int addrLoop = 0; /* Top of the delete loop */
int addrEphOpen = 0; /* Instruction to open the Ephemeral table */
int bComplex; /* True if there are triggers or FKs or
** subqueries in the WHERE clause */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True if attempting to delete from a view */
Trigger *pTrigger; /* List of table triggers, if required */
#endif
memset(&sContext, 0, sizeof(sContext));
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto delete_from_cleanup;
}
assert( pTabList->nSrc==1 );
/* Locate the table which we want to delete. This table has to be
** put in an SrcList structure because some of the subroutines we
** will be calling are designed to work with multiple tables and expect
** an SrcList* parameter instead of just a Table* parameter.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto delete_from_cleanup;
/* Figure out if we have any triggers and if the table being
** deleted from is a view
*/
#ifndef SQLITE_OMIT_TRIGGER
pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0);
isView = pTab->pSelect!=0;
bComplex = pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0);
#else
# define pTrigger 0
# define isView 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
/* If pTab is really a view, make sure it has been initialized.
*/
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto delete_from_cleanup;
}
if( sqlite3IsReadOnly(pParse, pTab, (pTrigger?1:0)) ){
goto delete_from_cleanup;
}
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
assert( iDb<db->nDb );
rcauth = sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0,
db->aDb[iDb].zDbSName);
assert( rcauth==SQLITE_OK || rcauth==SQLITE_DENY || rcauth==SQLITE_IGNORE );
if( rcauth==SQLITE_DENY ){
goto delete_from_cleanup;
}
assert(!isView || pTrigger);
/* Assign cursor numbers to the table and all its indices.
*/
assert( pTabList->nSrc==1 );
iTabCur = pTabList->a[0].iCursor = pParse->nTab++;
for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){
pParse->nTab++;
}
/* Start the view context
*/
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* Begin generating code.
*/
v = sqlite3GetVdbe(pParse);
if( v==0 ){
goto delete_from_cleanup;
}
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, 1, iDb);
/* If we are trying to delete from a view, realize that view into
** an ephemeral table.
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab, pWhere, iTabCur);
iDataCur = iIdxCur = iTabCur;
}
#endif
/* Resolve the column names in the WHERE clause.
*/
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto delete_from_cleanup;
}
/* Initialize the counter of the number of rows deleted, if
** we are counting rows.
*/
if( db->flags & SQLITE_CountRows ){
memCnt = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, memCnt);
}
#ifndef SQLITE_OMIT_TRUNCATE_OPTIMIZATION
/* Special case: A DELETE without a WHERE clause deletes everything.
** It is easier just to erase the whole table. Prior to version 3.6.5,
** this optimization caused the row change count (the value returned by
** API function sqlite3_count_changes) to be set incorrectly. */
if( rcauth==SQLITE_OK
&& pWhere==0
&& !bComplex
&& !IsVirtual(pTab)
#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
&& db->xPreUpdateCallback==0
#endif
){
assert( !isView );
sqlite3TableLock(pParse, iDb, pTab->tnum, 1, pTab->zName);
if( HasRowid(pTab) ){
sqlite3VdbeAddOp4(v, OP_Clear, pTab->tnum, iDb, memCnt,
pTab->zName, P4_STATIC);
}
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
assert( pIdx->pSchema==pTab->pSchema );
sqlite3VdbeAddOp2(v, OP_Clear, pIdx->tnum, iDb);
}
}else
#endif /* SQLITE_OMIT_TRUNCATE_OPTIMIZATION */
{
u16 wcf = WHERE_ONEPASS_DESIRED|WHERE_DUPLICATES_OK|WHERE_SEEK_TABLE;
if( sNC.ncFlags & NC_VarSelect ) bComplex = 1;
wcf |= (bComplex ? 0 : WHERE_ONEPASS_MULTIROW);
if( HasRowid(pTab) ){
/* For a rowid table, initialize the RowSet to an empty set */
pPk = 0;
nPk = 1;
iRowSet = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Null, 0, iRowSet);
}else{
/* For a WITHOUT ROWID table, create an ephemeral table used to
** hold all primary keys for rows to be deleted. */
pPk = sqlite3PrimaryKeyIndex(pTab);
assert( pPk!=0 );
nPk = pPk->nKeyCol;
iPk = pParse->nMem+1;
pParse->nMem += nPk;
iEphCur = pParse->nTab++;
addrEphOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEphCur, nPk);
sqlite3VdbeSetP4KeyInfo(pParse, pPk);
}
/* Construct a query to find the rowid or primary key for every row
** to be deleted, based on the WHERE clause. Set variable eOnePass
** to indicate the strategy used to implement this delete:
**
** ONEPASS_OFF: Two-pass approach - use a FIFO for rowids/PK values.
** ONEPASS_SINGLE: One-pass approach - at most one row deleted.
** ONEPASS_MULTI: One-pass approach - any number of rows may be deleted.
*/
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, wcf, iTabCur+1);
if( pWInfo==0 ) goto delete_from_cleanup;
eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
assert( IsVirtual(pTab)==0 || eOnePass!=ONEPASS_MULTI );
assert( IsVirtual(pTab) || bComplex || eOnePass!=ONEPASS_OFF );
/* Keep track of the number of rows to be deleted */
if( db->flags & SQLITE_CountRows ){
sqlite3VdbeAddOp2(v, OP_AddImm, memCnt, 1);
}
/* Extract the rowid or primary key for the current row */
if( pPk ){
for(i=0; i<nPk; i++){
assert( pPk->aiColumn[i]>=0 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iTabCur,
pPk->aiColumn[i], iPk+i);
}
iKey = iPk;
}else{
iKey = pParse->nMem + 1;
iKey = sqlite3ExprCodeGetColumn(pParse, pTab, -1, iTabCur, iKey, 0);
if( iKey>pParse->nMem ) pParse->nMem = iKey;
}
if( eOnePass!=ONEPASS_OFF ){
/* For ONEPASS, no need to store the rowid/primary-key. There is only
** one, so just keep it in its register(s) and fall through to the
** delete code. */
nKey = nPk; /* OP_Found will use an unpacked key */
aToOpen = sqlite3DbMallocRawNN(db, nIdx+2);
if( aToOpen==0 ){
sqlite3WhereEnd(pWInfo);
goto delete_from_cleanup;
}
memset(aToOpen, 1, nIdx+1);
aToOpen[nIdx+1] = 0;
if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iTabCur] = 0;
if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iTabCur] = 0;
if( addrEphOpen ) sqlite3VdbeChangeToNoop(v, addrEphOpen);
}else{
if( pPk ){
/* Add the PK key for this row to the temporary table */
iKey = ++pParse->nMem;
nKey = 0; /* Zero tells OP_Found to use a composite key */
sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, iKey,
sqlite3IndexAffinityStr(pParse->db, pPk), nPk);
sqlite3VdbeAddOp2(v, OP_IdxInsert, iEphCur, iKey);
}else{
/* Add the rowid of the row to be deleted to the RowSet */
nKey = 1; /* OP_Seek always uses a single rowid */
sqlite3VdbeAddOp2(v, OP_RowSetAdd, iRowSet, iKey);
}
}
/* If this DELETE cannot use the ONEPASS strategy, this is the
** end of the WHERE loop */
if( eOnePass!=ONEPASS_OFF ){
addrBypass = sqlite3VdbeMakeLabel(v);
}else{
sqlite3WhereEnd(pWInfo);
}
/* Unless this is a view, open cursors for the table we are
** deleting from and all its indices. If this is a view, then the
** only effect this statement has is to fire the INSTEAD OF
** triggers.
*/
if( !isView ){
int iAddrOnce = 0;
if( eOnePass==ONEPASS_MULTI ){
iAddrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
}
testcase( IsVirtual(pTab) );
sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, OPFLAG_FORDELETE,
iTabCur, aToOpen, &iDataCur, &iIdxCur);
assert( pPk || IsVirtual(pTab) || iDataCur==iTabCur );
assert( pPk || IsVirtual(pTab) || iIdxCur==iDataCur+1 );
if( eOnePass==ONEPASS_MULTI ) sqlite3VdbeJumpHere(v, iAddrOnce);
}
/* Set up a loop over the rowids/primary-keys that were found in the
** where-clause loop above.
*/
if( eOnePass!=ONEPASS_OFF ){
assert( nKey==nPk ); /* OP_Found will use an unpacked key */
if( !IsVirtual(pTab) && aToOpen[iDataCur-iTabCur] ){
assert( pPk!=0 || pTab->pSelect!=0 );
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, addrBypass, iKey, nKey);
VdbeCoverage(v);
}
}else if( pPk ){
addrLoop = sqlite3VdbeAddOp1(v, OP_Rewind, iEphCur); VdbeCoverage(v);
sqlite3VdbeAddOp2(v, OP_RowKey, iEphCur, iKey);
assert( nKey==0 ); /* OP_Found will use a composite key */
}else{
addrLoop = sqlite3VdbeAddOp3(v, OP_RowSetRead, iRowSet, 0, iKey);
VdbeCoverage(v);
assert( nKey==1 );
}
/* Delete the row */
#ifndef SQLITE_OMIT_VIRTUALTABLE
if( IsVirtual(pTab) ){
const char *pVTab = (const char *)sqlite3GetVTable(db, pTab);
sqlite3VtabMakeWritable(pParse, pTab);
sqlite3VdbeAddOp4(v, OP_VUpdate, 0, 1, iKey, pVTab, P4_VTAB);
sqlite3VdbeChangeP5(v, OE_Abort);
assert( eOnePass==ONEPASS_OFF || eOnePass==ONEPASS_SINGLE );
sqlite3MayAbort(pParse);
if( eOnePass==ONEPASS_SINGLE && sqlite3IsToplevel(pParse) ){
pParse->isMultiWrite = 0;
}
}else
#endif
{
int count = (pParse->nested==0); /* True to count changes */
int iIdxNoSeek = -1;
if( bComplex==0 && aiCurOnePass[1]!=iDataCur ){
iIdxNoSeek = aiCurOnePass[1];
}
sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur,
iKey, nKey, count, OE_Default, eOnePass, iIdxNoSeek);
}
/* End of the loop over all rowids/primary-keys. */
if( eOnePass!=ONEPASS_OFF ){
sqlite3VdbeResolveLabel(v, addrBypass);
sqlite3WhereEnd(pWInfo);
}else if( pPk ){
sqlite3VdbeAddOp2(v, OP_Next, iEphCur, addrLoop+1); VdbeCoverage(v);
sqlite3VdbeJumpHere(v, addrLoop);
}else{
sqlite3VdbeGoto(v, addrLoop);
sqlite3VdbeJumpHere(v, addrLoop);
}
/* Close the cursors open on the table and its indexes. */
if( !isView && !IsVirtual(pTab) ){
if( !pPk ) sqlite3VdbeAddOp1(v, OP_Close, iDataCur);
for(i=0, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){
sqlite3VdbeAddOp1(v, OP_Close, iIdxCur + i);
}
}
} /* End non-truncate path */
/* Update the sqlite_sequence table by storing the content of the
** maximum rowid counter values recorded while inserting into
** autoincrement tables.
*/
if( pParse->nested==0 && pParse->pTriggerTab==0 ){
sqlite3AutoincrementEnd(pParse);
}
/* Return the number of rows that were deleted. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( (db->flags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){
sqlite3VdbeAddOp2(v, OP_ResultRow, memCnt, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows deleted", SQLITE_STATIC);
}
delete_from_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprDelete(db, pWhere);
sqlite3DbFree(db, aToOpen);
return;
}
/*
** Generate code for an UPDATE of a virtual table.
**
** The strategy is that we create an ephemerial table that contains
** for each row to be changed:
**
** (A) The original rowid of that row.
** (B) The revised rowid for the row. (note1)
** (C) The content of every column in the row.
**
** Then we loop over this ephemeral table and for each row in
** the ephermeral table call VUpdate.
**
** When finished, drop the ephemeral table.
**
** (note1) Actually, if we know in advance that (A) is always the same
** as (B) we only store (A), then duplicate (A) when pulling
** it out of the ephemeral table before calling VUpdate.
*/
static void updateVirtualTable(
Parse *pParse, /* The parsing context */
SrcList *pSrc, /* The virtual table to be modified */
Table *pTab, /* The virtual table */
ExprList *pChanges, /* The columns to change in the UPDATE statement */
Expr *pRowid, /* Expression used to recompute the rowid */
int *aXRef, /* Mapping from columns of pTab to entries in pChanges */
Expr *pWhere /* WHERE clause of the UPDATE statement */
){
Vdbe *v = pParse->pVdbe; /* Virtual machine under construction */
ExprList *pEList = 0; /* The result set of the SELECT statement */
Select *pSelect = 0; /* The SELECT statement */
Expr *pExpr; /* Temporary expression */
int ephemTab; /* Table holding the result of the SELECT */
int i; /* Loop counter */
int addr; /* Address of top of loop */
sqlite3 *db = pParse->db; /* Database connection */
/* Construct the SELECT statement that will find the new values for
** all updated rows.
*/
pEList = sqlite3ExprListAppend(pParse, 0,
sqlite3CreateIdExpr(pParse, "_rowid_"), 0);
if( pRowid ){
pEList = sqlite3ExprListAppend(pParse, pEList,
sqlite3ExprDup(db, pRowid), 0);
}
assert( pTab->iPKey<0 );
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]>=0 ){
pExpr = sqlite3ExprDup(db, pChanges->a[aXRef[i]].pExpr);
}else{
pExpr = sqlite3CreateIdExpr(pParse, pTab->aCol[i].zName);
}
pEList = sqlite3ExprListAppend(pParse, pEList, pExpr, 0);
}
pSelect = sqlite3SelectNew(pParse, pEList, pSrc, pWhere, 0, 0, 0, 0, 0, 0);
/* Create the ephemeral table into which the update results will
** be stored.
*/
assert( v );
ephemTab = pParse->nTab++;
sqlite3VdbeAddOp(v, OP_OpenEphemeral, ephemTab, pTab->nCol+1+(pRowid!=0));
/* fill the ephemeral table
*/
sqlite3Select(pParse, pSelect, SRT_Table, ephemTab, 0, 0, 0, 0);
/*
** Generate code to scan the ephemeral table and call VDelete and
** VInsert
*/
sqlite3VdbeAddOp(v, OP_Rewind, ephemTab, 0);
addr = sqlite3VdbeCurrentAddr(v);
sqlite3VdbeAddOp(v, OP_Column, ephemTab, 0);
if( pRowid ){
sqlite3VdbeAddOp(v, OP_Column, ephemTab, 1);
}else{
sqlite3VdbeAddOp(v, OP_Dup, 0, 0);
}
for(i=0; i<pTab->nCol; i++){
sqlite3VdbeAddOp(v, OP_Column, ephemTab, i+1+(pRowid!=0));
}
pParse->pVirtualLock = pTab;
sqlite3VdbeOp3(v, OP_VUpdate, 0, pTab->nCol+2,
(const char*)pTab->pVtab, P3_VTAB);
sqlite3VdbeAddOp(v, OP_Next, ephemTab, addr);
sqlite3VdbeJumpHere(v, addr-1);
sqlite3VdbeAddOp(v, OP_Close, ephemTab, 0);
/* Cleanup */
sqlite3SelectDelete(pSelect);
}
