QT_USE_NAMESPACE
int main(int argc, char *argv[])
{
QCoreApplication coreApplication(argc, argv);
int argumentCount = QCoreApplication::arguments().size();
QStringList argumentList = QCoreApplication::arguments();
QTextStream standardOutput(stdout);
if (argumentCount == 1) {
standardOutput << QObject::tr("Usage: %1 <serialportname> [baudrate]").arg(argumentList.first()) << endl;
return 1;
}
QSerialPort serialPort;
QString serialPortName = argumentList.at(1);
serialPort.setPortName(serialPortName);
int serialPortBaudRate = (argumentCount > 2) ? argumentList.at(2).toInt() : QSerialPort::Baud9600;
serialPort.setBaudRate(serialPortBaudRate);
if (!serialPort.open(QIODevice::ReadOnly)) {
standardOutput << QObject::tr("Failed to open port %1, error: %2").arg(serialPortName).arg(serialPort.errorString()) << endl;
return 1;
}
SerialPortReader serialPortReader(&serialPort);
return coreApplication.exec();
}
QT_USE_NAMESPACE
int main(int argc, char *argv[])
{
QCoreApplication coreApplication(argc, argv);
int argumentCount = QCoreApplication::arguments().size();
QStringList argumentList = QCoreApplication::arguments();
QTextStream standardOutput(stdout);
if (argumentCount == 1) {
standardOutput << QObject::tr("Usage: %1 <serialportname> [baudrate]").arg(argumentList.first()) << endl;
return 1;
}
QSerialPort serialPort;
QString serialPortName = argumentList.at(1);
serialPort.setPortName(serialPortName);
int serialPortBaudRate = (argumentCount > 2) ? argumentList.at(2).toInt() : QSerialPort::Baud9600;
serialPort.setBaudRate(serialPortBaudRate);
if (!serialPort.open(QIODevice::WriteOnly)) {
standardOutput << QObject::tr("Failed to open port %1, error: %2").arg(serialPortName).arg(serialPort.errorString()) << endl;
return 1;
}
QFile dataFile;
if (!dataFile.open(stdin, QIODevice::ReadOnly)) {
standardOutput << QObject::tr("Failed to open stdin for reading") << endl;
return 1;
}
QByteArray writeData(dataFile.readAll());
dataFile.close();
if (writeData.isEmpty()) {
standardOutput << QObject::tr("Either no data was currently available on the standard input for reading, or an error occurred for port %1, error: %2").arg(serialPortName).arg(serialPort.errorString()) << endl;
return 1;
}
qint64 bytesWritten = serialPort.write(writeData);
if (bytesWritten == -1) {
standardOutput << QObject::tr("Failed to write the data to port %1, error: %2").arg(serialPortName).arg(serialPort.errorString()) << endl;
return 1;
} else if (bytesWritten != writeData.size()) {
standardOutput << QObject::tr("Failed to write all the data to port %1, error: %2").arg(serialPortName).arg(serialPort.errorString()) << endl;
return 1;
} else if (!serialPort.waitForBytesWritten(5000)) {
standardOutput << QObject::tr("Operation timed out or an error occurred for port %1, error: %2").arg(serialPortName).arg(serialPort.errorString()) << endl;
return 1;
}
standardOutput << QObject::tr("Data successfully sent to port %1").arg(serialPortName) << endl;
return 0;
}
bool versionControl::runMercurial(QString options) {
if (!this->isMercurialThere)
return false;
QSettings settings;
// get current model path from QSettings
QString path = settings.value("files/currentFileName", "No model").toString();
if (path == "No model")
return false;
// set up the environment for the spawned processes
QProcessEnvironment env = QProcessEnvironment::systemEnvironment();
env.insert("PATH", qgetenv("PATH"));
// to be used as a username if one is not set
env.insert("EMAIL", QHostInfo::localHostName());
// make the QProcess
QProcess * mercurial = new QProcess;
mercurial->setWorkingDirectory(QDir::toNativeSeparators(path));
mercurial->setProcessEnvironment(env);
connect(mercurial, SIGNAL(finished(int,QProcess::ExitStatus)), this, SLOT(finished(int, QProcess::ExitStatus)));
connect(mercurial, SIGNAL(readyReadStandardOutput()), this, SLOT(standardOutput()));
connect(mercurial, SIGNAL(readyReadStandardError()), this, SLOT(standardError()));
// clear stdOut & stdErr texts
stdOutText.clear();
stdErrText.clear();
// launch
mercurial->start("hg " + options);
// wait until complete, or 3 s
bool noerror = mercurial->waitForFinished(3000);
if (noerror) {
// check output
if (mercurial->exitCode() == 0) {
delete mercurial;
return true;
} else {
delete mercurial;
return false;
}
}
delete mercurial;
return false;
}
QT_USE_NAMESPACE
int main(int argc, char *argv[])
{
QCoreApplication coreApplication(argc, argv);
int argumentCount = QCoreApplication::arguments().size();
QStringList argumentList = QCoreApplication::arguments();
QTextStream standardOutput(stdout);
if (argumentCount == 1) {
standardOutput << QObject::tr("Usage: %1 <serialportname> [baudrate]").arg(argumentList.first()) << endl;
return 1;
}
QSerialPort serialPort;
QString serialPortName = argumentList.at(1);
serialPort.setPortName(serialPortName);
int serialPortBaudRate = (argumentCount > 2) ? argumentList.at(2).toInt() : QSerialPort::Baud9600;
serialPort.setBaudRate(serialPortBaudRate);
if (!serialPort.open(QIODevice::ReadOnly)) {
standardOutput << QObject::tr("Failed to open port %1, error: %2").arg(serialPortName).arg(serialPort.error()) << endl;
return 1;
}
QByteArray readData = serialPort.readAll();
while (serialPort.waitForReadyRead(5000))
readData.append(serialPort.readAll());
if (serialPort.error() == QSerialPort::ReadError) {
standardOutput << QObject::tr("Failed to read from port %1, error: %2").arg(serialPortName).arg(serialPort.errorString()) << endl;
return 1;
} else if (serialPort.error() == QSerialPort::TimeoutError && readData.isEmpty()) {
standardOutput << QObject::tr("No data was currently available for reading from port %1").arg(serialPortName) << endl;
return 0;
}
standardOutput << QObject::tr("Data successfully received from port %1").arg(serialPortName) << endl;
standardOutput << readData << endl;
return 0;
}
QT_USE_NAMESPACE
int main(int argc, char *argv[])
{
QCoreApplication coreApplication(argc, argv);
int argumentCount = QCoreApplication::arguments().size();
QStringList argumentList = QCoreApplication::arguments();
QTextStream standardOutput(stdout);
if (argumentCount == 1) {
standardOutput << QObject::tr("Usage: %1 <serialportname> [baudrate]").arg(argumentList.first()) << endl;
return 1;
}
QSerialPort serialPort;
QString serialPortName = argumentList.at(1);
serialPort.setPortName(serialPortName);
int serialPortBaudRate = (argumentCount > 2) ? argumentList.at(2).toInt() : QSerialPort::Baud9600;
serialPort.setBaudRate(serialPortBaudRate);
serialPort.open(QIODevice::WriteOnly);
QFile dataFile;
if (!dataFile.open(stdin, QIODevice::ReadOnly)) {
standardOutput << QObject::tr("Failed to open stdin for reading") << endl;
return 1;
}
QByteArray writeData(dataFile.readAll());
dataFile.close();
if (writeData.isEmpty()) {
standardOutput << QObject::tr("Either no data was currently available on the standard input for reading, or an error occurred for port %1, error: %2").arg(serialPortName).arg(serialPort.errorString()) << endl;
return 1;
}
SerialPortWriter serialPortWriter(&serialPort);
serialPortWriter.write(writeData);
return coreApplication.exec();
}
bool versionControl::isModelUnderMercurial() {
if (!this->isMercurialThere)
return false;
QSettings settings;
// get current model path from QSettings
QString path = settings.value("files/currentFileName", "No model").toString();
if (path == "No model")
return false;
// set up the environment for the spawned processes
QProcessEnvironment env = QProcessEnvironment::systemEnvironment();
env.insert("PATH", qgetenv("PATH"));
// make the QProcess
QProcess * mercurial = new QProcess;
mercurial->setWorkingDirectory(QDir::toNativeSeparators(path));
mercurial->setProcessEnvironment(env);
connect(mercurial, SIGNAL(finished(int,QProcess::ExitStatus)), this, SLOT(finished(int, QProcess::ExitStatus)));
connect(mercurial, SIGNAL(readyReadStandardOutput()), this, SLOT(standardOutput()));
connect(mercurial, SIGNAL(readyReadStandardError()), this, SLOT(standardError()));
mercurial->start("hg summary");
bool noerror = mercurial->waitForFinished(1000);
if (noerror) {
// check output
if (mercurial->exitCode() == 0)
return true;
else
return false;
}
return false;
}
void CPort::readDataFromPort()
{
time_t now;
struct tm tstruct;
char buf[80];
QTextStream standardOutput(stdout);
QByteArray readData;
while (true)
{
pSerialPort->waitForReadyRead(3000);
readData = pSerialPort->readAll();
if (!readData.isEmpty())
{
now = time(0);
tstruct = *localtime(&now);
strftime(buf, sizeof(buf), "%Y-%m-%d.%X", &tstruct);
if (pTable->InsertToBase(QString::fromUtf8(buf),mPortName,readData))
{
standardOutput << QObject::tr("You get data from the port %1 :").arg(mPortName)<< readData << ", in the " << buf << ".The info is loading to database!" << endl;
}
}
}
}
void versionControl::detectVCSes() {
// check for mercurial
// set up the environment for the spawned processes
QProcessEnvironment env = QProcessEnvironment::systemEnvironment();
env.insert("PATH", qgetenv("PATH"));
// make the QProcess
QProcess * mercurial = new QProcess;
mercurial->setWorkingDirectory(qgetenv("HOME"));
mercurial->setProcessEnvironment(env);
connect(mercurial, SIGNAL(finished(int,QProcess::ExitStatus)), this, SLOT(finished(int, QProcess::ExitStatus)));
connect(mercurial, SIGNAL(readyReadStandardOutput()), this, SLOT(standardOutput()));
connect(mercurial, SIGNAL(readyReadStandardError()), this, SLOT(standardError()));
mercurial->start("hg");
isMercurialThere = mercurial->waitForFinished(1000);
delete mercurial;
}