int
main (int argc, char **argv)
{
struct jpeg_decompress_struct cinfo;
struct jpeg_error_mgr jerr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
int file_index;
djpeg_dest_ptr dest_mgr = NULL;
FILE * input_file;
FILE * output_file;
JDIMENSION num_scanlines;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "djpeg"; /* in case C library doesn't provide it */
/* Initialize the JPEG decompression object with default error handling. */
cinfo.err = jpeg_std_error(&jerr);
jpeg_create_decompress(&cinfo);
/* Add some application-specific error messages (from cderror.h) */
jerr.addon_message_table = cdjpeg_message_table;
jerr.first_addon_message = JMSG_FIRSTADDONCODE;
jerr.last_addon_message = JMSG_LASTADDONCODE;
/* Insert custom marker processor for COM and APP12.
* APP12 is used by some digital camera makers for textual info,
* so we provide the ability to display it as text.
* If you like, additional APPn marker types can be selected for display,
* but don't try to override APP0 or APP14 this way (see libjpeg.doc).
*/
jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
/* Now safe to enable signal catcher. */
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &cinfo);
#endif
/* Scan command line to find file names. */
/* It is convenient to use just one switch-parsing routine, but the switch
* values read here are ignored; we will rescan the switches after opening
* the input file.
* (Exception: tracing level set here controls verbosity for COM markers
* found during jpeg_read_header...)
*/
file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
#ifdef TWO_FILE_COMMANDLINE
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
input_file = read_stdin();
}
/* Open the output file. */
if (outfilename != NULL) {
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
/* default output file is stdout */
output_file = write_stdout();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &cinfo, &progress);
#endif
/* Specify data source for decompression */
jpeg_stdio_src(&cinfo, input_file);
/* Read file header, set default decompression parameters */
(void) jpeg_read_header(&cinfo, TRUE);
/* Adjust default decompression parameters by re-parsing the options */
file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
/* Initialize the output module now to let it override any crucial
* option settings (for instance, GIF wants to force color quantization).
*/
switch (requested_fmt) {
#ifdef BMP_SUPPORTED
case FMT_BMP:
dest_mgr = jinit_write_bmp(&cinfo, FALSE);
break;
case FMT_OS2:
dest_mgr = jinit_write_bmp(&cinfo, TRUE);
break;
#endif
#ifdef GIF_SUPPORTED
case FMT_GIF:
dest_mgr = jinit_write_gif(&cinfo);
break;
#endif
#ifdef PPM_SUPPORTED
case FMT_PPM:
dest_mgr = jinit_write_ppm(&cinfo);
break;
#endif
#ifdef RLE_SUPPORTED
case FMT_RLE:
dest_mgr = jinit_write_rle(&cinfo);
break;
#endif
#ifdef TARGA_SUPPORTED
case FMT_TARGA:
dest_mgr = jinit_write_targa(&cinfo);
break;
#endif
default:
ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT);
break;
}
dest_mgr->output_file = output_file;
/* Start decompressor */
(void) jpeg_start_decompress(&cinfo);
/* Write output file header */
(*dest_mgr->start_output) (&cinfo, dest_mgr);
/* Process data */
while (cinfo.output_scanline < cinfo.output_height) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
#ifdef PROGRESS_REPORT
/* Hack: count final pass as done in case finish_output does an extra pass.
* The library won't have updated completed_passes.
*/
progress.pub.completed_passes = progress.pub.total_passes;
#endif
/* Finish decompression and release memory.
* I must do it in this order because output module has allocated memory
* of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
*/
(*dest_mgr->finish_output) (&cinfo, dest_mgr);
(void) jpeg_finish_decompress(&cinfo);
jpeg_destroy_decompress(&cinfo);
/* Close files, if we opened them */
if (input_file != stdin)
fclose(input_file);
if (output_file != stdout)
fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &cinfo);
#endif
/* All done. */
exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}
int
main (int argc, char **argv)
{
struct jpeg_compress_struct cinfo;
struct jpeg_error_mgr jerr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
int file_index;
cjpeg_source_ptr src_mgr;
FILE * input_file;
FILE * output_file = NULL;
unsigned char *outbuffer = NULL;
unsigned long outsize = 0;
JDIMENSION num_scanlines;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "cjpeg"; /* in case C library doesn't provide it */
/* Initialize the JPEG compression object with default error handling. */
cinfo.err = jpeg_std_error(&jerr);
jpeg_create_compress(&cinfo);
/* Add some application-specific error messages (from cderror.h) */
jerr.addon_message_table = cdjpeg_message_table;
jerr.first_addon_message = JMSG_FIRSTADDONCODE;
jerr.last_addon_message = JMSG_LASTADDONCODE;
/* Now safe to enable signal catcher. */
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &cinfo);
#endif
/* Initialize JPEG parameters.
* Much of this may be overridden later.
* In particular, we don't yet know the input file's color space,
* but we need to provide some value for jpeg_set_defaults() to work.
*/
cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
cinfo.use_moz_defaults = TRUE;
jpeg_set_defaults(&cinfo);
/* Scan command line to find file names.
* It is convenient to use just one switch-parsing routine, but the switch
* values read here are ignored; we will rescan the switches after opening
* the input file.
*/
file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
#ifdef TWO_FILE_COMMANDLINE
if (!memdst) {
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
input_file = read_stdin();
}
/* Open the output file. */
if (outfilename != NULL) {
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else if (!memdst) {
/* default output file is stdout */
output_file = write_stdout();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &cinfo, &progress);
#endif
/* Figure out the input file format, and set up to read it. */
src_mgr = select_file_type(&cinfo, input_file);
src_mgr->input_file = input_file;
/* Read the input file header to obtain file size & colorspace. */
(*src_mgr->start_input) (&cinfo, src_mgr);
/* Now that we know input colorspace, fix colorspace-dependent defaults */
#if JPEG_RAW_READER
if (!is_jpeg)
#endif
jpeg_default_colorspace(&cinfo);
/* Adjust default compression parameters by re-parsing the options */
file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
/* Specify data destination for compression */
#if JPEG_LIB_VERSION >= 80 || defined(MEM_SRCDST_SUPPORTED)
if (memdst)
jpeg_mem_dest(&cinfo, &outbuffer, &outsize);
else
#endif
jpeg_stdio_dest(&cinfo, output_file);
/* Start compressor */
jpeg_start_compress(&cinfo, TRUE);
/* Copy metadata */
if (is_jpeg) {
jpeg_saved_marker_ptr marker;
/* In the current implementation, we don't actually need to examine the
* option flag here; we just copy everything that got saved.
* But to avoid confusion, we do not output JFIF and Adobe APP14 markers
* if the encoder library already wrote one.
*/
for (marker = src_mgr->marker_list; marker != NULL; marker = marker->next) {
if (cinfo.write_JFIF_header &&
marker->marker == JPEG_APP0 &&
marker->data_length >= 5 &&
GETJOCTET(marker->data[0]) == 0x4A &&
GETJOCTET(marker->data[1]) == 0x46 &&
GETJOCTET(marker->data[2]) == 0x49 &&
GETJOCTET(marker->data[3]) == 0x46 &&
GETJOCTET(marker->data[4]) == 0)
continue; /* reject duplicate JFIF */
if (cinfo.write_Adobe_marker &&
marker->marker == JPEG_APP0+14 &&
marker->data_length >= 5 &&
GETJOCTET(marker->data[0]) == 0x41 &&
GETJOCTET(marker->data[1]) == 0x64 &&
GETJOCTET(marker->data[2]) == 0x6F &&
GETJOCTET(marker->data[3]) == 0x62 &&
GETJOCTET(marker->data[4]) == 0x65)
continue; /* reject duplicate Adobe */
jpeg_write_marker(&cinfo, marker->marker, marker->data, marker->data_length);
}
}
/* Process data */
while (cinfo.next_scanline < cinfo.image_height) {
num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
#if JPEG_RAW_READER
if (is_jpeg)
(void) jpeg_write_raw_data(&cinfo, src_mgr->plane_pointer, num_scanlines);
else
#endif
(void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
}
/* Finish compression and release memory */
(*src_mgr->finish_input) (&cinfo, src_mgr);
jpeg_finish_compress(&cinfo);
jpeg_destroy_compress(&cinfo);
/* Close files, if we opened them */
if (input_file != stdin)
fclose(input_file);
if (output_file != stdout && output_file != NULL)
fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &cinfo);
#endif
if (memdst) {
fprintf(stderr, "Compressed size: %lu bytes\n", outsize);
if (outbuffer != NULL)
free(outbuffer);
}
/* All done. */
exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}
int
main (int argc, char **argv)
{
struct jpeg_compress_struct cinfo;
struct jpeg_error_mgr jerr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
int file_index;
cjpeg_source_ptr src_mgr;
FILE * input_file;
FILE * output_file;
JDIMENSION num_scanlines;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "cjpeg"; /* in case C library doesn't provide it */
/* Initialize the JPEG compression object with default error handling. */
cinfo.err = jpeg_std_error(&jerr);
jpeg_create_compress(&cinfo);
/* Add some application-specific error messages (from cderror.h) */
jerr.addon_message_table = cdjpeg_message_table;
jerr.first_addon_message = JMSG_FIRSTADDONCODE;
jerr.last_addon_message = JMSG_LASTADDONCODE;
/* Now safe to enable signal catcher. */
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &cinfo);
#endif
/* Initialize JPEG parameters.
* Much of this may be overridden later.
* In particular, we don't yet know the input file's color space,
* but we need to provide some value for jpeg_set_defaults() to work.
*/
cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
jpeg_set_defaults(&cinfo);
/* Scan command line to find file names.
* It is convenient to use just one switch-parsing routine, but the switch
* values read here are ignored; we will rescan the switches after opening
* the input file.
*/
file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
#ifdef TWO_FILE_COMMANDLINE
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
input_file = read_stdin();
}
/* Open the output file. */
if (outfilename != NULL) {
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
/* default output file is stdout */
output_file = write_stdout();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &cinfo, &progress);
#endif
/* Figure out the input file format, and set up to read it. */
src_mgr = select_file_type(&cinfo, input_file);
src_mgr->input_file = input_file;
/* Read the input file header to obtain file size & colorspace. */
(*src_mgr->start_input) (&cinfo, src_mgr);
/* Now that we know input colorspace, fix colorspace-dependent defaults */
jpeg_default_colorspace(&cinfo);
/* Adjust default compression parameters by re-parsing the options */
file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
/* Specify data destination for compression */
jpeg_stdio_dest(&cinfo, output_file);
/* Start compressor */
jpeg_start_compress(&cinfo, TRUE);
/* Process data */
while (cinfo.next_scanline < cinfo.image_height) {
num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
(void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
}
/* Finish compression and release memory */
(*src_mgr->finish_input) (&cinfo, src_mgr);
jpeg_finish_compress(&cinfo);
jpeg_destroy_compress(&cinfo);
/* Close files, if we opened them */
if (input_file != stdin)
fclose(input_file);
if (output_file != stdout)
fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &cinfo);
#endif
/* All done. */
exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}
int
main (int argc, char **argv)
{
struct jpeg_decompress_struct srcinfo;
struct jpeg_compress_struct dstinfo;
struct jpeg_error_mgr jsrcerr, jdsterr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
jvirt_barray_ptr * src_coef_arrays;
jvirt_barray_ptr * dst_coef_arrays;
int file_index;
/* We assume all-in-memory processing and can therefore use only a
* single file pointer for sequential input and output operation.
*/
FILE * fp;
unsigned char *inbuffer = NULL;
unsigned long insize = 0;
unsigned char *outbuffer = NULL;
unsigned long outsize = 0;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "jpegtran"; /* in case C library doesn't provide it */
/* Initialize the JPEG decompression object with default error handling. */
srcinfo.err = jpeg_std_error(&jsrcerr);
jpeg_create_decompress(&srcinfo);
/* Initialize the JPEG compression object with default error handling. */
dstinfo.err = jpeg_std_error(&jdsterr);
jpeg_create_compress(&dstinfo);
dstinfo.use_moz_defaults = TRUE;
/* Scan command line to find file names.
* It is convenient to use just one switch-parsing routine, but the switch
* values read here are mostly ignored; we will rescan the switches after
* opening the input file. Also note that most of the switches affect the
* destination JPEG object, so we parse into that and then copy over what
* needs to affects the source too.
*/
file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
jsrcerr.trace_level = jdsterr.trace_level;
srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use;
#ifdef TWO_FILE_COMMANDLINE
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
fp = read_stdin();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &dstinfo, &progress);
#endif
/* Specify data source for decompression */
memsrc = dstinfo.use_moz_defaults; /* needed to revert to original */
#if JPEG_LIB_VERSION >= 80 || defined(MEM_SRCDST_SUPPORTED)
if (memsrc) {
size_t nbytes;
do {
inbuffer = (unsigned char *)realloc(inbuffer, insize + INPUT_BUF_SIZE);
if (inbuffer == NULL) {
fprintf(stderr, "%s: memory allocation failure\n", progname);
exit(EXIT_FAILURE);
}
nbytes = JFREAD(fp, &inbuffer[insize], INPUT_BUF_SIZE);
if (nbytes < INPUT_BUF_SIZE && ferror(fp)) {
if (file_index < argc)
fprintf(stderr, "%s: can't read from %s\n", progname,
argv[file_index]);
else
fprintf(stderr, "%s: can't read from stdin\n", progname);
}
insize += (unsigned long)nbytes;
} while (nbytes == INPUT_BUF_SIZE);
jpeg_mem_src(&srcinfo, inbuffer, insize);
} else
#endif
jpeg_stdio_src(&srcinfo, fp);
/* Enable saving of extra markers that we want to copy */
jcopy_markers_setup(&srcinfo, copyoption);
/* Read file header */
(void) jpeg_read_header(&srcinfo, TRUE);
/* Any space needed by a transform option must be requested before
* jpeg_read_coefficients so that memory allocation will be done right.
*/
#if TRANSFORMS_SUPPORTED
/* Fail right away if -perfect is given and transformation is not perfect.
*/
if (!jtransform_request_workspace(&srcinfo, &transformoption)) {
fprintf(stderr, "%s: transformation is not perfect\n", progname);
exit(EXIT_FAILURE);
}
#endif
/* Read source file as DCT coefficients */
src_coef_arrays = jpeg_read_coefficients(&srcinfo);
/* Initialize destination compression parameters from source values */
jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
/* Adjust destination parameters if required by transform options;
* also find out which set of coefficient arrays will hold the output.
*/
#if TRANSFORMS_SUPPORTED
dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
src_coef_arrays,
&transformoption);
#else
dst_coef_arrays = src_coef_arrays;
#endif
/* Close input file, if we opened it.
* Note: we assume that jpeg_read_coefficients consumed all input
* until JPEG_REACHED_EOI, and that jpeg_finish_decompress will
* only consume more while (! cinfo->inputctl->eoi_reached).
* We cannot call jpeg_finish_decompress here since we still need the
* virtual arrays allocated from the source object for processing.
*/
if (fp != stdin)
fclose(fp);
/* Open the output file. */
if (outfilename != NULL) {
if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
/* default output file is stdout */
fp = write_stdout();
}
/* Adjust default compression parameters by re-parsing the options */
file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
/* Specify data destination for compression */
#if JPEG_LIB_VERSION >= 80 || defined(MEM_SRCDST_SUPPORTED)
if (dstinfo.use_moz_defaults)
jpeg_mem_dest(&dstinfo, &outbuffer, &outsize);
else
#endif
jpeg_stdio_dest(&dstinfo, fp);
/* Start compressor (note no image data is actually written here) */
jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
/* Copy to the output file any extra markers that we want to preserve */
jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
/* Execute image transformation, if any */
#if TRANSFORMS_SUPPORTED
jtransform_execute_transformation(&srcinfo, &dstinfo,
src_coef_arrays,
&transformoption);
#endif
/* Finish compression and release memory */
jpeg_finish_compress(&dstinfo);
if (dstinfo.use_moz_defaults) {
size_t nbytes;
unsigned char *buffer = outbuffer;
unsigned long size = outsize;
if (insize < size) {
size = insize;
buffer = inbuffer;
}
nbytes = JFWRITE(fp, buffer, size);
if (nbytes < size && ferror(fp)) {
if (file_index < argc)
fprintf(stderr, "%s: can't write to %s\n", progname,
argv[file_index]);
else
fprintf(stderr, "%s: can't write to stdout\n", progname);
}
}
jpeg_destroy_compress(&dstinfo);
(void) jpeg_finish_decompress(&srcinfo);
jpeg_destroy_decompress(&srcinfo);
/* Close output file, if we opened it */
if (fp != stdout)
fclose(fp);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &dstinfo);
#endif
/* All done. */
exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}
int
main (int argc, char **argv)
{
struct jpeg_decompress_struct srcinfo;
struct jpeg_compress_struct dstinfo;
struct jpeg_error_mgr jsrcerr, jdsterr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
jvirt_barray_ptr * src_coef_arrays;
jvirt_barray_ptr * dst_coef_arrays;
int file_index;
FILE * input_file;
FILE * output_file;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "jpegtran"; /* in case C library doesn't provide it */
/* Initialize the JPEG decompression object with default error handling. */
srcinfo.err = jpeg_std_error(&jsrcerr);
jpeg_create_decompress(&srcinfo);
/* Initialize the JPEG compression object with default error handling. */
dstinfo.err = jpeg_std_error(&jdsterr);
jpeg_create_compress(&dstinfo);
/* Now safe to enable signal catcher.
* Note: we assume only the decompression object will have virtual arrays.
*/
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &srcinfo);
#endif
/* Scan command line to find file names.
* It is convenient to use just one switch-parsing routine, but the switch
* values read here are mostly ignored; we will rescan the switches after
* opening the input file. Also note that most of the switches affect the
* destination JPEG object, so we parse into that and then copy over what
* needs to affects the source too.
*/
file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
jsrcerr.trace_level = jdsterr.trace_level;
srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use;
#ifdef TWO_FILE_COMMANDLINE
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
input_file = read_stdin();
}
/* Open the output file. */
if (outfilename != NULL) {
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
/* default output file is stdout */
output_file = write_stdout();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &dstinfo, &progress);
#endif
/* Specify data source for decompression */
jpeg_stdio_src(&srcinfo, input_file);
/* Enable saving of extra markers that we want to copy */
jcopy_markers_setup(&srcinfo, copyoption);
/* Read file header */
(void) jpeg_read_header(&srcinfo, TRUE);
/* Any space needed by a transform option must be requested before
* jpeg_read_coefficients so that memory allocation will be done right.
*/
#if TRANSFORMS_SUPPORTED
jtransform_request_workspace(&srcinfo, &transformoption);
#endif
/* Read source file as DCT coefficients */
src_coef_arrays = jpeg_read_coefficients(&srcinfo);
/* Initialize destination compression parameters from source values */
jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
/* Adjust destination parameters if required by transform options;
* also find out which set of coefficient arrays will hold the output.
*/
#if TRANSFORMS_SUPPORTED
dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
src_coef_arrays,
&transformoption);
#else
dst_coef_arrays = src_coef_arrays;
#endif
/* Adjust default compression parameters by re-parsing the options */
file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
/* Specify data destination for compression */
jpeg_stdio_dest(&dstinfo, output_file);
/* Start compressor (note no image data is actually written here) */
jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
/* Copy to the output file any extra markers that we want to preserve */
jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
/* Execute image transformation, if any */
#if TRANSFORMS_SUPPORTED
jtransform_execute_transformation(&srcinfo, &dstinfo,
src_coef_arrays,
&transformoption);
#endif
/* Finish compression and release memory */
jpeg_finish_compress(&dstinfo);
jpeg_destroy_compress(&dstinfo);
(void) jpeg_finish_decompress(&srcinfo);
jpeg_destroy_decompress(&srcinfo);
/* Close files, if we opened them */
if (input_file != stdin)
fclose(input_file);
if (output_file != stdout)
fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &dstinfo);
#endif
/* All done. */
exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}
int
startup (int argc, char **argv)
{
struct jpeg_decompress_struct srcinfo;
struct jpeg_compress_struct dstinfo;
struct jpeg_error_mgr jsrcerr, jdsterr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
jvirt_barray_ptr * coef_arrays;
int file_index;
FILE * input_file;
FILE * output_file;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "jpegtran"; /* in case C library doesn't provide it */
/* Initialize the JPEG decompression object with default error handling. */
srcinfo.err = jpeg_std_error(&jsrcerr);
jpeg_create_decompress(&srcinfo);
/* Initialize the JPEG compression object with default error handling. */
dstinfo.err = jpeg_std_error(&jdsterr);
jpeg_create_compress(&dstinfo);
/* Now safe to enable signal catcher.
* Note: we assume only the decompression object will have virtual arrays.
*/
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &srcinfo);
#endif
/* Scan command line to find file names.
* It is convenient to use just one switch-parsing routine, but the switch
* values read here are ignored; we will rescan the switches after opening
* the input file.
*/
file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
jsrcerr.trace_level = jdsterr.trace_level;
srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use;
#ifdef TWO_FILE_COMMANDLINE
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
input_file = read_stdin();
}
/* Open the output file. */
if (outfilename != NULL) {
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
/* default output file is stdout */
output_file = write_stdout();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &dstinfo, &progress);
#endif
/* Specify data source for decompression */
jpeg_stdio_src(&srcinfo, input_file);
/* Read file header */
(void) jpeg_read_header(&srcinfo, TRUE);
/* Read source file as DCT coefficients */
coef_arrays = jpeg_read_coefficients(&srcinfo);
/* Initialize destination compression parameters from source values */
jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
/* Adjust default compression parameters by re-parsing the options */
file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
/* Specify data destination for compression */
jpeg_stdio_dest(&dstinfo, output_file);
/* Start compressor */
jpeg_write_coefficients(&dstinfo, coef_arrays);
/* ought to copy source comments here... */
/* Finish compression and release memory */
jpeg_finish_compress(&dstinfo);
jpeg_destroy_compress(&dstinfo);
(void) jpeg_finish_decompress(&srcinfo);
jpeg_destroy_decompress(&srcinfo);
/* Close files, if we opened them */
if (input_file != stdin)
fclose(input_file);
if (output_file != stdout)
fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &dstinfo);
#endif
/* All done. */
exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}
process_one_file (int argc, char **argv, int old_file_index)
{
struct jpeg_decompress_struct cinfo;
struct jpeg_error_mgr jerr;
char *infilename;
char workfilename[PATH_MAX];
const char *default_extension = NULL;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
int file_index;
djpeg_dest_ptr dest_mgr = NULL;
FILE * input_file = NULL;
FILE * output_file = NULL;
JDIMENSION num_scanlines;
/* Initialize the JPEG decompression object with default error handling. */
cinfo.err = jpeg_std_error(&jerr);
jpeg_create_decompress(&cinfo);
/* Add some application-specific error messages (from cderror.h) */
jerr.addon_message_table = cdjpeg_message_table;
jerr.first_addon_message = JMSG_FIRSTADDONCODE;
jerr.last_addon_message = JMSG_LASTADDONCODE;
/* Insert custom marker processor for COM and APP12.
* APP12 is used by some digital camera makers for textual info,
* so we provide the ability to display it as text.
* If you like, additional APPn marker types can be selected for display,
* but don't try to override APP0 or APP14 this way (see libjpeg.doc).
*/
jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
/* Now safe to enable signal catcher. */
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &cinfo);
#endif
/* Scan command line to find next file name.
* It is convenient to use just one switch-parsing routine, but the switch
* values read here are ignored; we will rescan the switches after opening
* the input file.
* (Exception: tracing level set here controls verbosity for COM markers
* found during jpeg_read_header...)
*/
file_index = parse_switches(&cinfo, argc, argv, old_file_index, FALSE);
if (file_index >= argc) {
fprintf(stderr, "%s: missing input file name\n", progname);
usage();
}
/* Open the input file. */
infilename = argv[file_index];
if ((input_file = fopen(infilename, READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, infilename);
goto fail;
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &cinfo, &progress);
#endif
/* Specify data source for decompression */
jpeg_stdio_src(&cinfo, input_file);
/* Read file header, set default decompression parameters */
(void) jpeg_read_header(&cinfo, TRUE);
/* Adjust default decompression parameters by re-parsing the options */
file_index = parse_switches(&cinfo, argc, argv, old_file_index, TRUE);
/* Initialize the output module now to let it override any crucial
* option settings (for instance, GIF wants to force color quantization).
*/
switch (requested_fmt) {
#ifdef BMP_SUPPORTED
case FMT_BMP:
dest_mgr = jinit_write_bmp(&cinfo, FALSE);
default_extension = ".bmp";
break;
case FMT_OS2:
dest_mgr = jinit_write_bmp(&cinfo, TRUE);
default_extension = ".bmp";
break;
#endif
#ifdef GIF_SUPPORTED
case FMT_GIF:
dest_mgr = jinit_write_gif(&cinfo);
default_extension = ".gif";
break;
#endif
#ifdef PPM_SUPPORTED
case FMT_PPM:
dest_mgr = jinit_write_ppm(&cinfo);
default_extension = ".ppm";
break;
#endif
#ifdef RLE_SUPPORTED
case FMT_RLE:
dest_mgr = jinit_write_rle(&cinfo);
default_extension = ".rle";
break;
#endif
#ifdef TARGA_SUPPORTED
case FMT_TARGA:
dest_mgr = jinit_write_targa(&cinfo);
default_extension = ".tga";
break;
#endif
default:
ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT);
break;
}
/* If user didn't supply -outfile switch, select output file name. */
if (outfilename == NULL) {
int i;
outfilename = workfilename;
/* Make outfilename be infilename with appropriate extension */
strcpy(outfilename, infilename);
for (i = strlen(outfilename)-1; i >= 0; i--) {
switch (outfilename[i]) {
case ':':
case '/':
case '\\':
i = 0; /* stop scanning */
break;
case '.':
outfilename[i] = '\0'; /* lop off existing extension */
i = 0; /* stop scanning */
break;
default:
break; /* keep scanning */
}
}
strcat(outfilename, default_extension);
}
fprintf(stderr, "Decompressing %s => %s\n", infilename, outfilename);
#ifndef NO_OVERWRITE_CHECK
if (! is_write_ok(outfilename))
goto fail;
#endif
/* Open the output file. */
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't create %s\n", progname, outfilename);
goto fail;
}
dest_mgr->output_file = output_file;
/* Start decompressor */
(void) jpeg_start_decompress(&cinfo);
/* Write output file header */
(*dest_mgr->start_output) (&cinfo, dest_mgr);
/* Process data */
while (cinfo.output_scanline < cinfo.output_height) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
#ifdef PROGRESS_REPORT
/* Hack: count final pass as done in case finish_output does an extra pass.
* The library won't have updated completed_passes.
*/
progress.pub.completed_passes = progress.pub.total_passes;
#endif
/* Finish decompression and release memory.
* I must do it in this order because output module has allocated memory
* of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
*/
(*dest_mgr->finish_output) (&cinfo, dest_mgr);
(void) jpeg_finish_decompress(&cinfo);
/* Clean up and exit */
fail:
jpeg_destroy_decompress(&cinfo);
if (input_file != NULL) fclose(input_file);
if (output_file != NULL) fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &cinfo);
#endif
/* Disable signal catcher. */
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) NULL);
#endif
return file_index;
}
int
main (int argc, char **argv)
{
struct jpeg_decompress_struct srcinfo;
struct jpeg_compress_struct dstinfo;
struct jpeg_error_mgr jsrcerr, jdsterr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
jvirt_barray_ptr * src_coef_arrays;
jvirt_barray_ptr * dst_coef_arrays;
int file_index;
FILE * input_file;
FILE * output_file;
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "jpegtran";
srcinfo.err = jpeg_std_error(&jsrcerr);
jpeg_create_decompress(&srcinfo);
dstinfo.err = jpeg_std_error(&jdsterr);
jpeg_create_compress(&dstinfo);
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &srcinfo);
#endif
file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
jsrcerr.trace_level = jdsterr.trace_level;
srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use;
#ifdef TWO_FILE_COMMANDLINE
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif
if (file_index < argc) {
if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
input_file = read_stdin();
}
if (outfilename != NULL) {
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
output_file = write_stdout();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &dstinfo, &progress);
#endif
jpeg_stdio_src(&srcinfo, input_file);
jcopy_markers_setup(&srcinfo, copyoption);
(void) jpeg_read_header(&srcinfo, TRUE);
#if TRANSFORMS_SUPPORTED
jtransform_request_workspace(&srcinfo, &transformoption);
#endif
src_coef_arrays = jpeg_read_coefficients(&srcinfo);
jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
#if TRANSFORMS_SUPPORTED
dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
src_coef_arrays,
&transformoption);
#else
dst_coef_arrays = src_coef_arrays;
#endif
file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
jpeg_stdio_dest(&dstinfo, output_file);
/* Start compressor (note no image data is actually written here) */
jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
#if TRANSFORMS_SUPPORTED
jtransform_execute_transformation(&srcinfo, &dstinfo,
src_coef_arrays,
&transformoption);
#endif
jpeg_finish_compress(&dstinfo);
jpeg_destroy_compress(&dstinfo);
(void) jpeg_finish_decompress(&srcinfo);
jpeg_destroy_decompress(&srcinfo);
if (input_file != stdin)
fclose(input_file);
if (output_file != stdout)
fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &dstinfo);
#endif
exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS);
return 0;
}
int
main (int argc, char **argv)
{
struct jpegxr_file_struct finfo;
struct jpeg_error_mgr jerr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
int file_index;
djpeg_dest_ptr dest_mgr = NULL;
FILE * input_file;
FILE * output_file;
JDIMENSION num_scanlines;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "djpeg-xr"; /* in case C library doesn't provide it */
/* Initialize the JPEG-XR file decompression object with default error
* handling. */
finfo.err = jpeg_std_error(&jerr);
jpegxr_file_create_decompress(&finfo);
/* Add some application-specific error messages (from cderror.h) */
jerr.addon_message_table = cdjpeg_message_table;
jerr.first_addon_message = JMSG_FIRSTADDONCODE;
jerr.last_addon_message = JMSG_LASTADDONCODE;
/* Now safe to enable signal catcher. */
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &finfo);
#endif
/* Scan command line to find file names. */
/* It is convenient to use just one switch-parsing routine, but the switch
* values read here are ignored; we will rescan the switches after opening
* the input file.
* (Exception: tracing level set here controls verbosity for COM markers
* found during jpeg_read_header...)
*/
file_index = parse_switches(&finfo, argc, argv, 0, FALSE);
#ifdef TWO_FILE_COMMANDLINE
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
input_file = read_stdin();
}
/* Open the output file. */
if (outfilename != NULL) {
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
/* default output file is stdout */
output_file = write_stdout();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &finfo, &progress);
#endif
/* Specify data source for decompression */
jpeg_stdio_src((j_common_ptr) &finfo, input_file);
/* Read file header */
(void) jpegxr_file_read_metadata(&finfo);
/* TODO - initialise the output module here */
/* Start decompressor */
(void) jpegxr_file_start_decompress(&finfo);
/* Write output file header */
//(*dest_mgr->start_output) (&finfo, dest_mgr);
/* TODO - process data, equivalent to jpeg_read_scanlines() */
//(*dest_mgr->finish_output) (&finfo, dest_mgr);
/* Finish decompression and release memory.
* Must be done in this order because output module has allocated memory
* of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
*/
(void) jpegxr_file_finish_decompress(&finfo);
jpegxr_file_destroy(&finfo);
/* Close files, if we opened them */
if (input_file != stdin)
fclose(input_file);
if (output_file != stdout)
fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &finfo);
#endif
/* All done. */
exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}
int
main (int argc, char **argv)
{
struct jpeg_decompress_struct cinfo;
struct jpeg_error_mgr jerr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
int file_index;
djpeg_dest_ptr dest_mgr = NULL;
FILE * input_file;
FILE * output_file;
unsigned char *inbuffer = NULL;
unsigned long insize = 0;
JDIMENSION num_scanlines;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "djpeg"; /* in case C library doesn't provide it */
/* Initialize the JPEG decompression object with default error handling. */
cinfo.err = jpeg_std_error(&jerr);
jpeg_create_decompress(&cinfo);
/* Add some application-specific error messages (from cderror.h) */
jerr.addon_message_table = cdjpeg_message_table;
jerr.first_addon_message = JMSG_FIRSTADDONCODE;
jerr.last_addon_message = JMSG_LASTADDONCODE;
/* Insert custom marker processor for COM and APP12.
* APP12 is used by some digital camera makers for textual info,
* so we provide the ability to display it as text.
* If you like, additional APPn marker types can be selected for display,
* but don't try to override APP0 or APP14 this way (see libjpeg.txt).
*/
jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
/* Scan command line to find file names. */
/* It is convenient to use just one switch-parsing routine, but the switch
* values read here are ignored; we will rescan the switches after opening
* the input file.
* (Exception: tracing level set here controls verbosity for COM markers
* found during jpeg_read_header...)
*/
file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
#ifdef TWO_FILE_COMMANDLINE
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
input_file = read_stdin();
}
/* Open the output file. */
if (outfilename != NULL) {
if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
/* default output file is stdout */
output_file = write_stdout();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &cinfo, &progress);
#endif
/* Specify data source for decompression */
#if JPEG_LIB_VERSION >= 80 || defined(MEM_SRCDST_SUPPORTED)
if (memsrc) {
size_t nbytes;
do {
inbuffer = (unsigned char *)realloc(inbuffer, insize + INPUT_BUF_SIZE);
if (inbuffer == NULL) {
fprintf(stderr, "%s: memory allocation failure\n", progname);
exit(EXIT_FAILURE);
}
nbytes = JFREAD(input_file, &inbuffer[insize], INPUT_BUF_SIZE);
if (nbytes < INPUT_BUF_SIZE && ferror(input_file)) {
if (file_index < argc)
fprintf(stderr, "%s: can't read from %s\n", progname,
argv[file_index]);
else
fprintf(stderr, "%s: can't read from stdin\n", progname);
}
insize += (unsigned long)nbytes;
} while (nbytes == INPUT_BUF_SIZE);
fprintf(stderr, "Compressed size: %lu bytes\n", insize);
jpeg_mem_src(&cinfo, inbuffer, insize);
} else
#endif
jpeg_stdio_src(&cinfo, input_file);
/* Read file header, set default decompression parameters */
(void) jpeg_read_header(&cinfo, TRUE);
/* Adjust default decompression parameters by re-parsing the options */
file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
/* Initialize the output module now to let it override any crucial
* option settings (for instance, GIF wants to force color quantization).
*/
switch (requested_fmt) {
#ifdef BMP_SUPPORTED
case FMT_BMP:
dest_mgr = jinit_write_bmp(&cinfo, FALSE);
break;
case FMT_OS2:
dest_mgr = jinit_write_bmp(&cinfo, TRUE);
break;
#endif
#ifdef GIF_SUPPORTED
case FMT_GIF:
dest_mgr = jinit_write_gif(&cinfo);
break;
#endif
#ifdef PPM_SUPPORTED
case FMT_PPM:
dest_mgr = jinit_write_ppm(&cinfo);
break;
#endif
#ifdef RLE_SUPPORTED
case FMT_RLE:
dest_mgr = jinit_write_rle(&cinfo);
break;
#endif
#ifdef TARGA_SUPPORTED
case FMT_TARGA:
dest_mgr = jinit_write_targa(&cinfo);
break;
#endif
default:
ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT);
break;
}
dest_mgr->output_file = output_file;
/* Start decompressor */
(void) jpeg_start_decompress(&cinfo);
/* Strip decode */
if (strip || skip) {
JDIMENSION tmp;
/* Check for valid endY. We cannot check this value until after
* jpeg_start_decompress() is called. Note that we have already verified
* that startY <= endY.
*/
if (endY > cinfo.output_height - 1) {
fprintf(stderr, "%s: strip %d-%d exceeds image height %d\n", progname,
startY, endY, cinfo.output_height);
exit(EXIT_FAILURE);
}
/* Write output file header. This is a hack to ensure that the destination
* manager creates an image of the proper size for the partial decode.
*/
tmp = cinfo.output_height;
cinfo.output_height = endY - startY + 1;
if (skip)
cinfo.output_height = tmp - cinfo.output_height;
(*dest_mgr->start_output) (&cinfo, dest_mgr);
cinfo.output_height = tmp;
/* Process data */
if (skip) {
while (cinfo.output_scanline < startY) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
jpeg_skip_scanlines(&cinfo, endY - startY + 1);
while (cinfo.output_scanline < cinfo.output_height) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
} else {
jpeg_skip_scanlines(&cinfo, startY);
while (cinfo.output_scanline <= endY) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
jpeg_skip_scanlines(&cinfo, cinfo.output_height - endY + 1);
}
/* Normal full image decode */
} else {
/* Write output file header */
(*dest_mgr->start_output) (&cinfo, dest_mgr);
/* Process data */
while (cinfo.output_scanline < cinfo.output_height) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
}
#ifdef PROGRESS_REPORT
/* Hack: count final pass as done in case finish_output does an extra pass.
* The library won't have updated completed_passes.
*/
progress.pub.completed_passes = progress.pub.total_passes;
#endif
/* Finish decompression and release memory.
* I must do it in this order because output module has allocated memory
* of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
*/
(*dest_mgr->finish_output) (&cinfo, dest_mgr);
(void) jpeg_finish_decompress(&cinfo);
jpeg_destroy_decompress(&cinfo);
/* Close files, if we opened them */
if (input_file != stdin)
fclose(input_file);
if (output_file != stdout)
fclose(output_file);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &cinfo);
#endif
if (memsrc && inbuffer != NULL)
free(inbuffer);
/* All done. */
exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}
