static int stm32x_protect_check(struct flash_bank *bank)
{
struct target *target = bank->target;
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
uint32_t protection;
int i, s;
int num_bits;
int set;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
int retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
/* medium density - each bit refers to a 4bank protection
* high density - each bit refers to a 2bank protection */
retval = target_read_u32(target, STM32_FLASH_WRPR, &protection);
if (retval != ERROR_OK)
return retval;
/* medium density - each protection bit is for 4 * 1K pages
* high density - each protection bit is for 2 * 2K pages */
num_bits = (bank->num_sectors / stm32x_info->ppage_size);
if (stm32x_info->ppage_size == 2)
{
/* high density flash/connectivity line protection */
set = 1;
if (protection & (1 << 31))
set = 0;
/* bit 31 controls sector 62 - 255 protection for high density
* bit 31 controls sector 62 - 127 protection for connectivity line */
for (s = 62; s < bank->num_sectors; s++)
{
bank->sectors[s].is_protected = set;
}
if (bank->num_sectors > 61)
num_bits = 31;
for (i = 0; i < num_bits; i++)
{
set = 1;
if (protection & (1 << i))
set = 0;
for (s = 0; s < stm32x_info->ppage_size; s++)
bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
}
else
{
/* low/medium density flash protection */
for (i = 0; i < num_bits; i++)
{
set = 1;
if (protection & (1 << i))
set = 0;
for (s = 0; s < stm32x_info->ppage_size; s++)
bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
}
return ERROR_OK;
}
static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
{
struct stm32x_flash_bank *stm32x_info = NULL;
struct target *target = bank->target;
uint16_t prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
int i, reg, bit;
int status;
uint32_t protection;
stm32x_info = bank->driver_priv;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
int retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
if ((first % stm32x_info->ppage_size) != 0)
{
LOG_WARNING("aligned start protect sector to a %d sector boundary",
stm32x_info->ppage_size);
first = first - (first % stm32x_info->ppage_size);
}
if (((last + 1) % stm32x_info->ppage_size) != 0)
{
LOG_WARNING("aligned end protect sector to a %d sector boundary",
stm32x_info->ppage_size);
last++;
last = last - (last % stm32x_info->ppage_size);
last--;
}
/* medium density - each bit refers to a 4bank protection
* high density - each bit refers to a 2bank protection */
retval = target_read_u32(target, STM32_FLASH_WRPR, &protection);
if (retval != ERROR_OK)
return retval;
prot_reg[0] = (uint16_t)protection;
prot_reg[1] = (uint16_t)(protection >> 8);
prot_reg[2] = (uint16_t)(protection >> 16);
prot_reg[3] = (uint16_t)(protection >> 24);
if (stm32x_info->ppage_size == 2)
{
/* high density flash */
/* bit 7 controls sector 62 - 255 protection */
if (last > 61)
{
if (set)
prot_reg[3] &= ~(1 << 7);
else
prot_reg[3] |= (1 << 7);
}
if (first > 61)
first = 62;
if (last > 61)
last = 61;
for (i = first; i <= last; i++)
{
reg = (i / stm32x_info->ppage_size) / 8;
bit = (i / stm32x_info->ppage_size) - (reg * 8);
if (set)
prot_reg[reg] &= ~(1 << bit);
else
prot_reg[reg] |= (1 << bit);
}
}
else
{
/* medium density flash */
for (i = first; i <= last; i++)
{
reg = (i / stm32x_info->ppage_size) / 8;
bit = (i / stm32x_info->ppage_size) - (reg * 8);
if (set)
prot_reg[reg] &= ~(1 << bit);
else
prot_reg[reg] |= (1 << bit);
}
}
if ((status = stm32x_erase_options(bank)) != ERROR_OK)
return status;
stm32x_info->option_bytes.protection[0] = prot_reg[0];
stm32x_info->option_bytes.protection[1] = prot_reg[1];
stm32x_info->option_bytes.protection[2] = prot_reg[2];
stm32x_info->option_bytes.protection[3] = prot_reg[3];
return stm32x_write_options(bank);
}
/////////////////////////////////////////////////////////////////////////////
// Here begins the standard command set. These commands will be the main
// interface to the part and are the heart of the flash driver. There will be
// an entry for each of these in the flash_driver structure at the end of
// this file. Reference:
// http://openocd.berlios.de/doc/doxygen/html/structflash__driver.html#aa4fda4f0ea001af0b75d7b9ca879b0d0
//
// It is required that these functions (described in the flash_driver structure)
// exist and be entered int the flash_driver structure. Weird segmentation faults
// may result otherwise (guess how I know).
//
// protect_check is the first of these functions, although they can be defined
// in any order. protect_check checks each protection region in a specified bank
// to see if it is protected in hardware. An appropriate entry is made in the
// sectors array in the bank structure.
// The algorithm for checking protection is specific to each device and
// must be custom. That's why it's in the flash_driver!. Indeed, some devices
// might not have this sort of protection at all. As mentioned above, the function
// still must exist, even if it just returns.
static int stm32x_protect_check(struct flash_bank *bank)
{
// Note the method of obtaining the target name from the bank structure.
// the target name is used in calls that read and write specific registers.
struct target *target = bank->target;
// This is the standard method of obtaining the pointer to the private
// data structure so that the private data can be accessed.
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
uint32_t protection;
int i, s;
int num_bits;
int set;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
// stm32x specific function call
int retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
// The target_read_u32 is very commonly used to read specific registers
// for a device. The error code should always be checked.
/* medium density - each bit refers to a 4bank protection
* high density - each bit refers to a 2bank protection */
retval = target_read_u32(target, STM32_FLASH_WRPR, &protection);
if (retval != ERROR_OK)
return retval;
/* medium density - each protection bit is for 4 * 1K pages
* high density - each protection bit is for 2 * 2K pages */
num_bits = (bank->num_sectors / stm32x_info->ppage_size);
if (stm32x_info->ppage_size == 2)
{
/* high density flash/connectivity line protection */
set = 1;
if (protection & (1 << 31))
set = 0;
/* bit 31 controls sector 62 - 255 protection for high density
* bit 31 controls sector 62 - 127 protection for connectivity line */
for (s = 62; s < bank->num_sectors; s++)
{
bank->sectors[s].is_protected = set;
}
if (bank->num_sectors > 61)
num_bits = 31;
for (i = 0; i < num_bits; i++)
{
set = 1;
if (protection & (1 << i))
set = 0;
for (s = 0; s < stm32x_info->ppage_size; s++)
bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
}
else
{
/* low/medium density flash protection */
for (i = 0; i < num_bits; i++)
{
set = 1;
if (protection & (1 << i))
set = 0;
for (s = 0; s < stm32x_info->ppage_size; s++)
bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
}
return ERROR_OK;
}
