double *subband_search_delays(int numchan, int numsubbands, double dm,
double lofreq, double chanwidth, double voverc)
/* Return an array of delays (sec) for a subband DM search. The */
/* delays are calculated normally for each of the 'numchan' channels */
/* using the appropriate frequencies at the 'dm'. Then the delay */
/* from the highest frequency channel of each of the 'numsubbands' */
/* subbands is subtracted from each subband. This gives the subbands */
/* the correct delays for each freq in the subband, but the subbands */
/* themselves are offset as if they had not been de-dispersed. This */
/* way, we can call float_dedisp() on the subbands if needed. */
/* 'lofreq' is the center frequency in MHz of the lowest frequency */
/* channel. 'chanwidth' is the width in MHz of each channel. The */
/* returned array is allocated by this routine. 'voverc' is used to */
/* correct the input frequencies for doppler effects. See the */
/* comments in dedisp_delays() for more info. */
/* Note: When performing a subband search, the delays for each */
/* subband must be calculated with the frequency of the highest */
/* channel in each subband, _not_ the center subband frequency. */
{
int ii, jj, chan_per_subband;
double *delays, *subbanddelays;
chan_per_subband = numchan / numsubbands;
/* Calculate the appropriate delays to subtract from each subband */
subbanddelays = subband_delays(numchan, numsubbands, dm,
lofreq, chanwidth, voverc);
/* Calculate the appropriate delays for each channel */
delays = dedisp_delays(numchan, dm, lofreq, chanwidth, voverc);
for (ii = 0; ii < numsubbands; ii++)
for (jj = 0; jj < chan_per_subband; jj++)
delays[ii * chan_per_subband + jj] -= subbanddelays[ii];
free(subbanddelays);
return delays;
}
void correct_subbands_for_DM(double dm, prepfoldinfo * search,
double *ddprofs, foldstats * ddstats)
/* Calculate the DM delays and apply them to the subbands */
/* to create de-dispersed profiles. */
{
int ii, *dmdelays;
double *subbanddelays, hif, dopplerhif, hifdelay, rdphase;
rdphase = search->fold.p1 * search->proflen;
hif = search->lofreq + (search->numchan - 1.0) * search->chan_wid;
dopplerhif = doppler(hif, search->avgvoverc);
hifdelay = delay_from_dm(dm, dopplerhif);
subbanddelays = subband_delays(search->numchan, search->nsub, dm,
search->lofreq, search->chan_wid,
search->avgvoverc);
dmdelays = gen_ivect(search->nsub);
for (ii = 0; ii < search->nsub; ii++)
dmdelays[ii] =
NEAREST_INT((subbanddelays[ii] - hifdelay) * rdphase) % search->proflen;
vect_free(subbanddelays);
combine_subbands(search->rawfolds, search->stats, search->npart,
search->nsub, search->proflen, dmdelays, ddprofs, ddstats);
vect_free(dmdelays);
}
int main(int argc, char *argv[])
{
/* Any variable that begins with 't' means topocentric */
/* Any variable that begins with 'b' means barycentric */
FILE **outfiles = NULL;
float **outdata;
double dtmp, *dms, avgdm = 0.0, dsdt = 0, maxdm;
double *dispdt, tlotoa = 0.0, blotoa = 0.0, BW_ddelay = 0.0;
double max = -9.9E30, min = 9.9E30, var = 0.0, avg = 0.0;
double *btoa = NULL, *ttoa = NULL, avgvoverc = 0.0;
char obs[3], ephem[10], rastring[50], decstring[50];
long totnumtowrite, totwrote = 0, padwrote = 0, datawrote = 0;
int *idispdt, **offsets;
int ii, jj, numadded = 0, numremoved = 0, padding = 0, good_inputs = 1;
int numbarypts = 0, numread = 0, numtowrite = 0;
int padtowrite = 0, statnum = 0;
int numdiffbins = 0, *diffbins = NULL, *diffbinptr = NULL, good_padvals = 0;
double local_lodm;
char *datafilenm, *outpath, *outfilenm, *hostname;
struct spectra_info s;
infodata idata;
mask obsmask;
MPI_Init(&argc, &argv);
MPI_Comm_size(MPI_COMM_WORLD, &numprocs);
MPI_Comm_rank(MPI_COMM_WORLD, &myid);
#ifdef _OPENMP
omp_set_num_threads(1); // Explicitly turn off OpenMP
#endif
set_using_MPI();
{
FILE *hostfile;
char tmpname[100];
int retval;
hostfile = chkfopen("/etc/hostname", "r");
retval = fscanf(hostfile, "%s\n", tmpname);
if (retval==0) {
printf("Warning: error reading /etc/hostname on proc %d\n", myid);
}
hostname = (char *) calloc(strlen(tmpname) + 1, 1);
memcpy(hostname, tmpname, strlen(tmpname));
fclose(hostfile);
}
/* Call usage() if we have no command line arguments */
if (argc == 1) {
if (myid == 0) {
Program = argv[0];
usage();
}
MPI_Finalize();
exit(1);
}
make_maskbase_struct();
make_spectra_info_struct();
/* Parse the command line using the excellent program Clig */
cmd = parseCmdline(argc, argv);
spectra_info_set_defaults(&s);
// If we are zeroDMing, make sure that clipping is off.
if (cmd->zerodmP) cmd->noclipP = 1;
s.clip_sigma = cmd->clip;
if (cmd->noclipP) {
cmd->clip = 0.0;
s.clip_sigma = 0.0;
}
if (cmd->ifsP) {
// 0 = default or summed, 1-4 are possible also
s.use_poln = cmd->ifs + 1;
}
if (!cmd->numoutP)
cmd->numout = LONG_MAX;
#ifdef DEBUG
showOptionValues();
#endif
if (myid == 0) { /* Master node only */
printf("\n\n");
printf(" Parallel Pulsar Subband De-dispersion Routine\n");
printf(" by Scott M. Ransom\n\n");
s.filenames = cmd->argv;
s.num_files = cmd->argc;
s.clip_sigma = cmd->clip;
// -1 causes the data to determine if we use weights, scales, &
// offsets for PSRFITS or flip the band for any data type where
// we can figure that out with the data
s.apply_flipband = (cmd->invertP) ? 1 : -1;
s.apply_weight = (cmd->noweightsP) ? 0 : -1;
s.apply_scale = (cmd->noscalesP) ? 0 : -1;
s.apply_offset = (cmd->nooffsetsP) ? 0 : -1;
s.remove_zerodm = (cmd->zerodmP) ? 1 : 0;
if (RAWDATA) {
if (cmd->filterbankP) s.datatype = SIGPROCFB;
else if (cmd->psrfitsP) s.datatype = PSRFITS;
else if (cmd->pkmbP) s.datatype = SCAMP;
else if (cmd->bcpmP) s.datatype = BPP;
else if (cmd->wappP) s.datatype = WAPP;
else if (cmd->spigotP) s.datatype = SPIGOT;
} else { // Attempt to auto-identify the data
identify_psrdatatype(&s, 1);
if (s.datatype==SIGPROCFB) cmd->filterbankP = 1;
else if (s.datatype==PSRFITS) cmd->psrfitsP = 1;
else if (s.datatype==SCAMP) cmd->pkmbP = 1;
else if (s.datatype==BPP) cmd->bcpmP = 1;
else if (s.datatype==WAPP) cmd->wappP = 1;
else if (s.datatype==SPIGOT) cmd->spigotP = 1;
else if (s.datatype==SUBBAND) insubs = 1;
else {
printf("\nError: Unable to identify input data files. Please specify type.\n\n");
good_inputs = 0;
}
}
// So far we can only handle PSRFITS, filterbank, and subbands
if (s.datatype!=PSRFITS &&
s.datatype!=SIGPROCFB &&
s.datatype!=SUBBAND) good_inputs = 0;
// For subbanded data
if (!RAWDATA) s.files = (FILE **)malloc(sizeof(FILE *) * s.num_files);
if (good_inputs && (RAWDATA || insubs)) {
char description[40];
psrdatatype_description(description, s.datatype);
if (s.num_files > 1)
printf("Reading %s data from %d files:\n", description, s.num_files);
else
printf("Reading %s data from 1 file:\n", description);
for (ii = 0; ii < s.num_files; ii++) {
printf(" '%s'\n", cmd->argv[ii]);
if (insubs) s.files[ii] = chkfopen(s.filenames[ii], "rb");
}
printf("\n");
if (RAWDATA) {
read_rawdata_files(&s);
print_spectra_info_summary(&s);
spectra_info_to_inf(&s, &idata);
} else { // insubs
char *root, *suffix;
cmd->nsub = s.num_files;
s.N = chkfilelen(s.files[0], sizeof(short));
s.start_subint = gen_ivect(1);
s.num_subint = gen_ivect(1);
s.start_MJD = (long double *)malloc(sizeof(long double));
s.start_spec = (long long *)malloc(sizeof(long long));
s.num_spec = (long long *)malloc(sizeof(long long));
s.num_pad = (long long *)malloc(sizeof(long long));
s.start_spec[0] = 0L;
s.start_subint[0] = 0;
s.num_spec[0] = s.N;
s.num_subint[0] = s.N / SUBSBLOCKLEN;
s.num_pad[0] = 0L;
s.padvals = gen_fvect(s.num_files);
for (ii = 0 ; ii < ii ; ii++)
s.padvals[ii] = 0.0;
if (split_root_suffix(s.filenames[0], &root, &suffix) == 0) {
printf("\nError: The input filename (%s) must have a suffix!\n\n", s.filenames[0]);
exit(1);
}
if (strncmp(suffix, "sub", 3) == 0) {
char *tmpname;
tmpname = calloc(strlen(root) + 10, 1);
sprintf(tmpname, "%s.sub", root);
readinf(&idata, tmpname);
free(tmpname);
strncpy(s.telescope, idata.telescope, 40);
strncpy(s.backend, idata.instrument, 40);
strncpy(s.observer, idata.observer, 40);
strncpy(s.source, idata.object, 40);
s.ra2000 = hms2rad(idata.ra_h, idata.ra_m,
idata.ra_s) * RADTODEG;
s.dec2000 = dms2rad(idata.dec_d, idata.dec_m,
idata.dec_s) * RADTODEG;
ra_dec_to_string(s.ra_str,
idata.ra_h, idata.ra_m, idata.ra_s);
ra_dec_to_string(s.dec_str,
idata.dec_d, idata.dec_m, idata.dec_s);
s.num_channels = idata.num_chan;
s.start_MJD[0] = idata.mjd_i + idata.mjd_f;
s.dt = idata.dt;
s.T = s.N * s.dt;
s.lo_freq = idata.freq;
s.df = idata.chan_wid;
s.hi_freq = s.lo_freq + (s.num_channels - 1.0) * s.df;
s.BW = s.num_channels * s.df;
s.fctr = s.lo_freq - 0.5 * s.df + 0.5 * s.BW;
s.beam_FWHM = idata.fov / 3600.0;
s.spectra_per_subint = SUBSBLOCKLEN;
print_spectra_info_summary(&s);
} else {
printf("\nThe input files (%s) must be subbands! (i.e. *.sub##)\n\n",
cmd->argv[0]);
MPI_Finalize();
exit(1);
}
free(root);
free(suffix);
}
}
}
// If we don't have good input data, exit
MPI_Bcast(&good_inputs, 1, MPI_INT, 0, MPI_COMM_WORLD);
if (!good_inputs) {
MPI_Finalize();
exit(1);
}
MPI_Bcast(&insubs, 1, MPI_INT, 0, MPI_COMM_WORLD);
if (insubs)
cmd->nsub = cmd->argc;
/* Determine the output file names and open them */
local_numdms = cmd->numdms / (numprocs - 1);
dms = gen_dvect(local_numdms);
if (cmd->numdms % (numprocs - 1)) {
if (myid == 0)
printf
("\nThe number of DMs must be divisible by (the number of processors - 1).\n\n");
MPI_Finalize();
exit(1);
}
local_lodm = cmd->lodm + (myid - 1) * local_numdms * cmd->dmstep;
split_path_file(cmd->outfile, &outpath, &outfilenm);
datafilenm = (char *) calloc(strlen(outfilenm) + 20, 1);
if (myid > 0) {
if (chdir(outpath) == -1) {
printf("\nProcess %d on %s cannot chdir() to '%s'. Exiting.\n\n",
myid, hostname, outpath);
MPI_Finalize();
exit(1);
}
outfiles = (FILE **) malloc(local_numdms * sizeof(FILE *));
for (ii = 0; ii < local_numdms; ii++) {
dms[ii] = local_lodm + ii * cmd->dmstep;
avgdm += dms[ii];
sprintf(datafilenm, "%s_DM%.2f.dat", outfilenm, dms[ii]);
outfiles[ii] = chkfopen(datafilenm, "wb");
}
avgdm /= local_numdms;
}
// Broadcast the raw data information
broadcast_spectra_info(&s, myid);
if (myid > 0) {
spectra_info_to_inf(&s, &idata);
if (s.datatype==SIGPROCFB) cmd->filterbankP = 1;
else if (s.datatype==PSRFITS) cmd->psrfitsP = 1;
else if (s.datatype==SCAMP) cmd->pkmbP = 1;
else if (s.datatype==BPP) cmd->bcpmP = 1;
else if (s.datatype==WAPP) cmd->wappP = 1;
else if (s.datatype==SPIGOT) cmd->spigotP = 1;
else if (s.datatype==SUBBAND) insubs = 1;
}
s.filenames = cmd->argv;
/* Read an input mask if wanted */
if (myid > 0) {
int numpad = s.num_channels;
if (insubs)
numpad = s.num_files;
s.padvals = gen_fvect(numpad);
for (ii = 0 ; ii < numpad ; ii++)
s.padvals[ii] = 0.0;
}
if (cmd->maskfileP) {
if (myid == 0) {
read_mask(cmd->maskfile, &obsmask);
printf("Read mask information from '%s'\n\n", cmd->maskfile);
good_padvals = determine_padvals(cmd->maskfile, &obsmask, s.padvals);
}
broadcast_mask(&obsmask, myid);
MPI_Bcast(&good_padvals, 1, MPI_INT, 0, MPI_COMM_WORLD);
MPI_Bcast(s.padvals, obsmask.numchan, MPI_FLOAT, 0, MPI_COMM_WORLD);
} else {
obsmask.numchan = obsmask.numint = 0;
MPI_Bcast(&good_padvals, 1, MPI_INT, 0, MPI_COMM_WORLD);
}
// The number of topo to bary time points to generate with TEMPO
numbarypts = (int) (s.T * 1.1 / TDT + 5.5) + 1;
// Identify the TEMPO observatory code
{
char *outscope = (char *) calloc(40, sizeof(char));
telescope_to_tempocode(idata.telescope, outscope, obs);
free(outscope);
}
// Broadcast or calculate a few extra important values
if (insubs) avgdm = idata.dm;
idata.dm = avgdm;
dsdt = cmd->downsamp * idata.dt;
maxdm = cmd->lodm + cmd->numdms * cmd->dmstep;
BW_ddelay = delay_from_dm(maxdm, idata.freq) -
delay_from_dm(maxdm, idata.freq + (idata.num_chan-1) * idata.chan_wid);
blocksperread = ((int) (BW_ddelay / idata.dt) / s.spectra_per_subint + 1);
worklen = s.spectra_per_subint * blocksperread;
if (cmd->nsub > s.num_channels) {
printf
("Warning: The number of requested subbands (%d) is larger than the number of channels (%d).\n",
cmd->nsub, s.num_channels);
printf(" Re-setting the number of subbands to %d.\n\n", s.num_channels);
cmd->nsub = s.num_channels;
}
if (s.spectra_per_subint % cmd->downsamp) {
if (myid == 0) {
printf
("\nError: The downsample factor (%d) must be a factor of the\n",
cmd->downsamp);
printf(" blocklength (%d). Exiting.\n\n", s.spectra_per_subint);
}
MPI_Finalize();
exit(1);
}
tlotoa = idata.mjd_i + idata.mjd_f; /* Topocentric epoch */
if (cmd->numoutP)
totnumtowrite = cmd->numout;
else
totnumtowrite = (long) idata.N / cmd->downsamp;
if (cmd->nobaryP) { /* Main loop if we are not barycentering... */
/* Dispersion delays (in bins). The high freq gets no delay */
/* All other delays are positive fractions of bin length (dt) */
dispdt = subband_search_delays(s.num_channels, cmd->nsub, avgdm,
idata.freq, idata.chan_wid, 0.0);
idispdt = gen_ivect(s.num_channels);
for (ii = 0; ii < s.num_channels; ii++)
idispdt[ii] = NEAREST_LONG(dispdt[ii] / idata.dt);
vect_free(dispdt);
/* The subband dispersion delays (see note above) */
offsets = gen_imatrix(local_numdms, cmd->nsub);
for (ii = 0; ii < local_numdms; ii++) {
double *subdispdt;
subdispdt = subband_delays(s.num_channels, cmd->nsub, dms[ii],
idata.freq, idata.chan_wid, 0.0);
dtmp = subdispdt[cmd->nsub - 1];
for (jj = 0; jj < cmd->nsub; jj++)
offsets[ii][jj] = NEAREST_LONG((subdispdt[jj] - dtmp) / dsdt);
vect_free(subdispdt);
}
/* Allocate our data array and start getting data */
if (myid == 0) {
printf("De-dispersing using %d subbands.\n", cmd->nsub);
if (cmd->downsamp > 1)
printf("Downsampling by a factor of %d (new dt = %.10g)\n",
cmd->downsamp, dsdt);
printf("\n");
}
/* Print the nodes and the DMs they are handling */
print_dms(hostname, myid, numprocs, local_numdms, dms);
outdata = gen_fmatrix(local_numdms, worklen / cmd->downsamp);
numread = get_data(outdata, blocksperread, &s,
&obsmask, idispdt, offsets, &padding);
while (numread == worklen) {
numread /= cmd->downsamp;
if (myid == 0)
print_percent_complete(totwrote, totnumtowrite);
/* Write the latest chunk of data, but don't */
/* write more than cmd->numout points. */
numtowrite = numread;
if (cmd->numoutP && (totwrote + numtowrite) > cmd->numout)
numtowrite = cmd->numout - totwrote;
if (myid > 0) {
write_data(outfiles, local_numdms, outdata, 0, numtowrite);
/* Update the statistics */
if (!padding) {
for (ii = 0; ii < numtowrite; ii++)
update_stats(statnum + ii, outdata[0][ii], &min, &max, &avg, &var);
statnum += numtowrite;
}
}
totwrote += numtowrite;
/* Stop if we have written out all the data we need to */
if (cmd->numoutP && (totwrote == cmd->numout))
break;
numread = get_data(outdata, blocksperread, &s,
&obsmask, idispdt, offsets, &padding);
}
datawrote = totwrote;
} else { /* Main loop if we are barycentering... */
/* What ephemeris will we use? (Default is DE405) */
strcpy(ephem, "DE405");
/* Define the RA and DEC of the observation */
ra_dec_to_string(rastring, idata.ra_h, idata.ra_m, idata.ra_s);
ra_dec_to_string(decstring, idata.dec_d, idata.dec_m, idata.dec_s);
/* Allocate some arrays */
btoa = gen_dvect(numbarypts);
ttoa = gen_dvect(numbarypts);
for (ii = 0; ii < numbarypts; ii++)
ttoa[ii] = tlotoa + TDT * ii / SECPERDAY;
/* Call TEMPO for the barycentering */
if (myid == 0) {
double maxvoverc = -1.0, minvoverc = 1.0, *voverc = NULL;
printf("\nGenerating barycentric corrections...\n");
voverc = gen_dvect(numbarypts);
barycenter(ttoa, btoa, voverc, numbarypts, rastring, decstring, obs, ephem);
for (ii = 0; ii < numbarypts; ii++) {
if (voverc[ii] > maxvoverc)
maxvoverc = voverc[ii];
if (voverc[ii] < minvoverc)
minvoverc = voverc[ii];
avgvoverc += voverc[ii];
}
avgvoverc /= numbarypts;
vect_free(voverc);
printf(" Average topocentric velocity (c) = %.7g\n", avgvoverc);
printf(" Maximum topocentric velocity (c) = %.7g\n", maxvoverc);
printf(" Minimum topocentric velocity (c) = %.7g\n\n", minvoverc);
printf("De-dispersing using %d subbands.\n", cmd->nsub);
if (cmd->downsamp > 1) {
printf(" Downsample = %d\n", cmd->downsamp);
printf(" New sample dt = %.10g\n", dsdt);
}
printf("\n");
}
/* Print the nodes and the DMs they are handling */
print_dms(hostname, myid, numprocs, local_numdms, dms);
MPI_Bcast(btoa, numbarypts, MPI_DOUBLE, 0, MPI_COMM_WORLD);
MPI_Bcast(&avgvoverc, 1, MPI_DOUBLE, 0, MPI_COMM_WORLD);
blotoa = btoa[0];
/* Dispersion delays (in bins). The high freq gets no delay */
/* All other delays are positive fractions of bin length (dt) */
dispdt = subband_search_delays(s.num_channels, cmd->nsub, avgdm,
idata.freq, idata.chan_wid, avgvoverc);
idispdt = gen_ivect(s.num_channels);
for (ii = 0; ii < s.num_channels; ii++)
idispdt[ii] = NEAREST_LONG(dispdt[ii] / idata.dt);
vect_free(dispdt);
/* The subband dispersion delays (see note above) */
offsets = gen_imatrix(local_numdms, cmd->nsub);
for (ii = 0; ii < local_numdms; ii++) {
double *subdispdt;
subdispdt = subband_delays(s.num_channels, cmd->nsub, dms[ii],
idata.freq, idata.chan_wid, avgvoverc);
dtmp = subdispdt[cmd->nsub - 1];
for (jj = 0; jj < cmd->nsub; jj++)
offsets[ii][jj] = NEAREST_LONG((subdispdt[jj] - dtmp) / dsdt);
vect_free(subdispdt);
}
/* Convert the bary TOAs to differences from the topo TOAs in */
/* units of bin length (dt) rounded to the nearest integer. */
dtmp = (btoa[0] - ttoa[0]);
for (ii = 0; ii < numbarypts; ii++)
btoa[ii] = ((btoa[ii] - ttoa[ii]) - dtmp) * SECPERDAY / dsdt;
/* Find the points where we need to add or remove bins */
{
int oldbin = 0, currentbin;
double lobin, hibin, calcpt;
numdiffbins = abs(NEAREST_LONG(btoa[numbarypts - 1])) + 1;
diffbins = gen_ivect(numdiffbins);
diffbinptr = diffbins;
for (ii = 1; ii < numbarypts; ii++) {
currentbin = NEAREST_LONG(btoa[ii]);
if (currentbin != oldbin) {
if (currentbin > 0) {
calcpt = oldbin + 0.5;
lobin = (ii - 1) * TDT / dsdt;
hibin = ii * TDT / dsdt;
} else {
calcpt = oldbin - 0.5;
lobin = -((ii - 1) * TDT / dsdt);
hibin = -(ii * TDT / dsdt);
}
while (fabs(calcpt) < fabs(btoa[ii])) {
/* Negative bin number means remove that bin */
/* Positive bin number means add a bin there */
*diffbinptr =
NEAREST_LONG(LININTERP
(calcpt, btoa[ii - 1], btoa[ii], lobin, hibin));
diffbinptr++;
calcpt = (currentbin > 0) ? calcpt + 1.0 : calcpt - 1.0;
}
oldbin = currentbin;
}
}
*diffbinptr = cmd->numout; /* Used as a marker */
}
diffbinptr = diffbins;
/* Now perform the barycentering */
outdata = gen_fmatrix(local_numdms, worklen / cmd->downsamp);
numread = get_data(outdata, blocksperread, &s,
&obsmask, idispdt, offsets, &padding);
while (numread == worklen) { /* Loop to read and write the data */
int numwritten = 0;
double block_avg, block_var;
numread /= cmd->downsamp;
/* Determine the approximate local average */
avg_var(outdata[0], numread, &block_avg, &block_var);
if (myid == 0)
print_percent_complete(totwrote, totnumtowrite);
/* Simply write the data if we don't have to add or */
/* remove any bins from this batch. */
/* OR write the amount of data up to cmd->numout or */
/* the next bin that will be added or removed. */
numtowrite = abs(*diffbinptr) - datawrote;
if (cmd->numoutP && (totwrote + numtowrite) > cmd->numout)
numtowrite = cmd->numout - totwrote;
if (numtowrite > numread)
numtowrite = numread;
if (myid > 0) {
write_data(outfiles, local_numdms, outdata, 0, numtowrite);
/* Update the statistics */
if (!padding) {
for (ii = 0; ii < numtowrite; ii++)
update_stats(statnum + ii, outdata[0][ii], &min, &max, &avg, &var);
statnum += numtowrite;
}
}
datawrote += numtowrite;
totwrote += numtowrite;
numwritten += numtowrite;
if ((datawrote == abs(*diffbinptr)) &&
(numwritten != numread) &&
(totwrote < cmd->numout)) { /* Add/remove a bin */
int skip, nextdiffbin;
skip = numtowrite;
/* Write the rest of the data after adding/removing a bin */
do {
if (*diffbinptr > 0) {
/* Add a bin */
if (myid > 0)
write_padding(outfiles, local_numdms, block_avg, 1);
numadded++;
totwrote++;
} else {
/* Remove a bin */
numremoved++;
datawrote++;
numwritten++;
skip++;
}
diffbinptr++;
/* Write the part after the diffbin */
numtowrite = numread - numwritten;
if (cmd->numoutP && (totwrote + numtowrite) > cmd->numout)
numtowrite = cmd->numout - totwrote;
nextdiffbin = abs(*diffbinptr) - datawrote;
if (numtowrite > nextdiffbin)
numtowrite = nextdiffbin;
if (myid > 0) {
write_data(outfiles, local_numdms, outdata, skip, numtowrite);
/* Update the statistics and counters */
if (!padding) {
for (ii = 0; ii < numtowrite; ii++)
update_stats(statnum + ii,
outdata[0][skip + ii], &min, &max, &avg, &var);
statnum += numtowrite;
}
}
numwritten += numtowrite;
datawrote += numtowrite;
totwrote += numtowrite;
skip += numtowrite;
/* Stop if we have written out all the data we need to */
if (cmd->numoutP && (totwrote == cmd->numout))
break;
} while (numwritten < numread);
}
/* Stop if we have written out all the data we need to */
if (cmd->numoutP && (totwrote == cmd->numout))
break;
numread = get_data(outdata, blocksperread, &s,
&obsmask, idispdt, offsets, &padding);
}
}
if (myid > 0) {
/* Calculate the amount of padding we need */
if (cmd->numoutP && (cmd->numout > totwrote))
padwrote = padtowrite = cmd->numout - totwrote;
/* Write the new info file for the output data */
idata.dt = dsdt;
update_infodata(&idata, totwrote, padtowrite, diffbins,
numdiffbins, cmd->downsamp);
for (ii = 0; ii < local_numdms; ii++) {
idata.dm = dms[ii];
if (!cmd->nobaryP) {
double baryepoch, barydispdt, baryhifreq;
baryhifreq = idata.freq + (s.num_channels - 1) * idata.chan_wid;
barydispdt = delay_from_dm(dms[ii], doppler(baryhifreq, avgvoverc));
baryepoch = blotoa - (barydispdt / SECPERDAY);
idata.bary = 1;
idata.mjd_i = (int) floor(baryepoch);
idata.mjd_f = baryepoch - idata.mjd_i;
}
sprintf(idata.name, "%s_DM%.2f", outfilenm, dms[ii]);
writeinf(&idata);
}
/* Set the padded points equal to the average data point */
if (idata.numonoff >= 1) {
int index, startpad, endpad;
for (ii = 0; ii < local_numdms; ii++) {
fclose(outfiles[ii]);
sprintf(datafilenm, "%s_DM%.2f.dat", outfilenm, dms[ii]);
outfiles[ii] = chkfopen(datafilenm, "rb+");
}
for (ii = 0; ii < idata.numonoff; ii++) {
index = 2 * ii;
startpad = idata.onoff[index + 1];
if (ii == idata.numonoff - 1)
endpad = idata.N - 1;
else
endpad = idata.onoff[index + 2];
for (jj = 0; jj < local_numdms; jj++)
chkfseek(outfiles[jj], (startpad + 1) * sizeof(float), SEEK_SET);
padtowrite = endpad - startpad;
write_padding(outfiles, local_numdms, avg, padtowrite);
}
}
}
/* Print simple stats and results */
var /= (datawrote - 1);
if (myid == 0)
print_percent_complete(1, 1);
if (myid == 1) {
printf("\n\nDone.\n\nSimple statistics of the output data:\n");
printf(" Data points written: %ld\n", totwrote);
if (padwrote)
printf(" Padding points written: %ld\n", padwrote);
if (!cmd->nobaryP) {
if (numadded)
printf(" Bins added for barycentering: %d\n", numadded);
if (numremoved)
printf(" Bins removed for barycentering: %d\n", numremoved);
}
printf(" Maximum value of data: %.2f\n", max);
printf(" Minimum value of data: %.2f\n", min);
printf(" Data average value: %.2f\n", avg);
printf(" Data standard deviation: %.2f\n", sqrt(var));
printf("\n");
}
/* Close the files and cleanup */
if (cmd->maskfileP)
free_mask(obsmask);
if (myid > 0) {
for (ii = 0; ii < local_numdms; ii++)
fclose(outfiles[ii]);
free(outfiles);
}
vect_free(outdata[0]);
vect_free(outdata);
vect_free(dms);
free(hostname);
vect_free(idispdt);
vect_free(offsets[0]);
vect_free(offsets);
free(datafilenm);
free(outfilenm);
free(outpath);
if (!cmd->nobaryP) {
vect_free(btoa);
vect_free(ttoa);
vect_free(diffbins);
}
MPI_Finalize();
return (0);
}
