Beispiel #1
0
static int transmit_audio(fax_session *s)
{
	int res = -1;
	struct ast_format *original_read_fmt;
	struct ast_format *original_write_fmt = NULL;
	fax_state_t fax;
	t30_state_t *t30state;
	struct ast_frame *inf = NULL;
	int last_state = 0;
	struct timeval now, start, state_change;
	enum ast_t38_state t38_state;
	struct ast_control_t38_parameters t38_parameters = { .version = 0,
							     .max_ifp = 800,
							     .rate = AST_T38_RATE_14400,
							     .rate_management = AST_T38_RATE_MANAGEMENT_TRANSFERRED_TCF,
							     .fill_bit_removal = 1,
/*
 * spandsp has API calls to support MMR and JBIG transcoding, but they aren't
 * implemented quite yet... so don't offer them to the remote endpoint
 *							     .transcoding_mmr = 1,
 *							     .transcoding_jbig = 1,
*/
	};

	/* if in called party mode, try to use T.38 */
	if (s->caller_mode == FALSE) {
		/* check if we are already in T.38 mode (unlikely), or if we can request
		 * a switch... if so, request it now and wait for the result, rather
		 * than starting an audio FAX session that will have to be cancelled
		 */
		if ((t38_state = ast_channel_get_t38_state(s->chan)) == T38_STATE_NEGOTIATED) {
			return 1;
		} else if ((t38_state != T38_STATE_UNAVAILABLE) &&
			   (t38_parameters.request_response = AST_T38_REQUEST_NEGOTIATE,
			    (ast_indicate_data(s->chan, AST_CONTROL_T38_PARAMETERS, &t38_parameters, sizeof(t38_parameters)) == 0))) {
			/* wait up to five seconds for negotiation to complete */
			unsigned int timeout = 5000;
			int ms;

			ast_debug(1, "Negotiating T.38 for receive on %s\n", ast_channel_name(s->chan));
			while (timeout > 0) {
				ms = ast_waitfor(s->chan, 1000);
				if (ms < 0) {
					ast_log(LOG_WARNING, "something bad happened while channel '%s' was polling.\n", ast_channel_name(s->chan));
					return -1;
				}
				if (!ms) {
					/* nothing happened */
					if (timeout > 0) {
						timeout -= 1000;
						continue;
					} else {
						ast_log(LOG_WARNING, "channel '%s' timed-out during the T.38 negotiation.\n", ast_channel_name(s->chan));
						break;
					}
				}
				if (!(inf = ast_read(s->chan))) {
					return -1;
				}
				if ((inf->frametype == AST_FRAME_CONTROL) &&
				    (inf->subclass.integer == AST_CONTROL_T38_PARAMETERS) &&
				    (inf->datalen == sizeof(t38_parameters))) {
					struct ast_control_t38_parameters *parameters = inf->data.ptr;

					switch (parameters->request_response) {
					case AST_T38_NEGOTIATED:
						ast_debug(1, "Negotiated T.38 for receive on %s\n", ast_channel_name(s->chan));
						res = 1;
						break;
					case AST_T38_REFUSED:
						ast_log(LOG_WARNING, "channel '%s' refused to negotiate T.38\n", ast_channel_name(s->chan));
						break;
					default:
						ast_log(LOG_ERROR, "channel '%s' failed to negotiate T.38\n", ast_channel_name(s->chan));
						break;
					}
					ast_frfree(inf);
					if (res == 1) {
						return 1;
					} else {
						break;
					}
				}
				ast_frfree(inf);
			}
		}
	}

#if SPANDSP_RELEASE_DATE >= 20080725
        /* for spandsp shaphots 0.0.6 and higher */
        t30state = &fax.t30;
#else
        /* for spandsp release 0.0.5 */
        t30state = &fax.t30_state;
#endif

    original_read_fmt = ao2_bump(ast_channel_readformat(s->chan));
	res = ast_set_read_format(s->chan, ast_format_slin);
	if (res < 0) {
		ast_log(LOG_WARNING, "Unable to set to linear read mode, giving up\n");
		goto done;
	}

	original_write_fmt = ao2_bump(ast_channel_writeformat(s->chan));
	res = ast_set_write_format(s->chan, ast_format_slin);
	if (res < 0) {
		ast_log(LOG_WARNING, "Unable to set to linear write mode, giving up\n");
		goto done;
	}

	/* Initialize T30 terminal */
	fax_init(&fax, s->caller_mode);

	/* Setup logging */
	set_logging(&fax.logging);
	set_logging(&t30state->logging);

	/* Configure terminal */
	set_local_info(t30state, s);
	set_file(t30state, s);
	set_ecm(t30state, TRUE);

	fax_set_transmit_on_idle(&fax, TRUE);

	t30_set_phase_e_handler(t30state, phase_e_handler, s);

	start = state_change = ast_tvnow();

	ast_activate_generator(s->chan, &generator, &fax);

	while (!s->finished) {
		inf = NULL;

		if ((res = ast_waitfor(s->chan, 25)) < 0) {
			ast_debug(1, "Error waiting for a frame\n");
			break;
		}

		/* Watchdog */
		now = ast_tvnow();
		if (ast_tvdiff_sec(now, start) > WATCHDOG_TOTAL_TIMEOUT || ast_tvdiff_sec(now, state_change) > WATCHDOG_STATE_TIMEOUT) {
			ast_log(LOG_WARNING, "It looks like we hung. Aborting.\n");
			res = -1;
			break;
		}

		if (!res) {
			/* There was timeout waiting for a frame. Loop around and wait again */
			continue;
		}

		/* There is a frame available. Get it */
		res = 0;

		if (!(inf = ast_read(s->chan))) {
			ast_debug(1, "Channel hangup\n");
			res = -1;
			break;
		}

		ast_debug(10, "frame %d/%s, len=%d\n", inf->frametype, ast_format_get_name(inf->subclass.format), inf->datalen);

		/* Check the frame type. Format also must be checked because there is a chance
		   that a frame in old format was already queued before we set channel format
		   to slinear so it will still be received by ast_read */
		if (inf->frametype == AST_FRAME_VOICE &&
			(ast_format_cmp(inf->subclass.format, ast_format_slin) == AST_FORMAT_CMP_EQUAL)) {
			if (fax_rx(&fax, inf->data.ptr, inf->samples) < 0) {
				/* I know fax_rx never returns errors. The check here is for good style only */
				ast_log(LOG_WARNING, "fax_rx returned error\n");
				res = -1;
				break;
			}
			if (last_state != t30state->state) {
				state_change = ast_tvnow();
				last_state = t30state->state;
			}
		} else if ((inf->frametype == AST_FRAME_CONTROL) &&
			   (inf->subclass.integer == AST_CONTROL_T38_PARAMETERS)) {
			struct ast_control_t38_parameters *parameters = inf->data.ptr;

			if (parameters->request_response == AST_T38_NEGOTIATED) {
				/* T38 switchover completed */
				s->t38parameters = *parameters;
				ast_debug(1, "T38 negotiated, finishing audio loop\n");
				res = 1;
				break;
			} else if (parameters->request_response == AST_T38_REQUEST_NEGOTIATE) {
				t38_parameters.request_response = AST_T38_NEGOTIATED;
				ast_debug(1, "T38 request received, accepting\n");
				/* Complete T38 switchover */
				ast_indicate_data(s->chan, AST_CONTROL_T38_PARAMETERS, &t38_parameters, sizeof(t38_parameters));
				/* Do not break audio loop, wait until channel driver finally acks switchover
				 * with AST_T38_NEGOTIATED
				 */
			}
		}

		ast_frfree(inf);
		inf = NULL;
	}

	ast_debug(1, "Loop finished, res=%d\n", res);

	if (inf)
		ast_frfree(inf);

	ast_deactivate_generator(s->chan);

	/* If we are switching to T38, remove phase E handler. Otherwise it will be executed
	   by t30_terminate, display diagnostics and set status variables although no transmittion
	   has taken place yet. */
	if (res > 0) {
		t30_set_phase_e_handler(t30state, NULL, NULL);
	}

	t30_terminate(t30state);
	fax_release(&fax);

done:
	if (original_write_fmt) {
		if (ast_set_write_format(s->chan, original_write_fmt) < 0)
			ast_log(LOG_WARNING, "Unable to restore write format on '%s'\n", ast_channel_name(s->chan));
		ao2_ref(original_write_fmt, -1);
	}

	if (original_read_fmt) {
		if (ast_set_read_format(s->chan, original_read_fmt) < 0)
			ast_log(LOG_WARNING, "Unable to restore read format on '%s'\n", ast_channel_name(s->chan));
		ao2_ref(original_read_fmt, -1);
	}

	return res;

}

static int transmit_t38(fax_session *s)
{
	int res = 0;
	t38_terminal_state_t t38;
	struct ast_frame *inf = NULL;
	int last_state = 0;
	struct timeval now, start, state_change, last_frame;
	t30_state_t *t30state;
	t38_core_state_t *t38state;

#if SPANDSP_RELEASE_DATE >= 20080725
	/* for spandsp shaphots 0.0.6 and higher */
	t30state = &t38.t30;
	t38state = &t38.t38_fe.t38;
#else
	/* for spandsp releases 0.0.5 */
	t30state = &t38.t30_state;
	t38state = &t38.t38;
#endif

	/* Initialize terminal */
	memset(&t38, 0, sizeof(t38));
	if (t38_terminal_init(&t38, s->caller_mode, t38_tx_packet_handler, s->chan) == NULL) {
		ast_log(LOG_WARNING, "Unable to start T.38 termination.\n");
		res = -1;
		goto disable_t38;
	}

	t38_set_max_datagram_size(t38state, s->t38parameters.max_ifp);

	if (s->t38parameters.fill_bit_removal) {
		t38_set_fill_bit_removal(t38state, TRUE);
	}
	if (s->t38parameters.transcoding_mmr) {
		t38_set_mmr_transcoding(t38state, TRUE);
	}
	if (s->t38parameters.transcoding_jbig) {
		t38_set_jbig_transcoding(t38state, TRUE);
	}

	/* Setup logging */
	set_logging(&t38.logging);
	set_logging(&t30state->logging);
	set_logging(&t38state->logging);

	/* Configure terminal */
	set_local_info(t30state, s);
	set_file(t30state, s);
	set_ecm(t30state, TRUE);

	t30_set_phase_e_handler(t30state, phase_e_handler, s);

	now = start = state_change = ast_tvnow();

	while (!s->finished) {
		inf = NULL;

		if ((res = ast_waitfor(s->chan, 25)) < 0) {
			ast_debug(1, "Error waiting for a frame\n");
			break;
		}

		last_frame = now;

		/* Watchdog */
		now = ast_tvnow();
		if (ast_tvdiff_sec(now, start) > WATCHDOG_TOTAL_TIMEOUT || ast_tvdiff_sec(now, state_change) > WATCHDOG_STATE_TIMEOUT) {
			ast_log(LOG_WARNING, "It looks like we hung. Aborting.\n");
			res = -1;
			break;
		}

		t38_terminal_send_timeout(&t38, ast_tvdiff_us(now, last_frame) / (1000000 / 8000));

		if (!res) {
			/* There was timeout waiting for a frame. Loop around and wait again */
			continue;
		}

		/* There is a frame available. Get it */
		res = 0;

		if (!(inf = ast_read(s->chan))) {
			ast_debug(1, "Channel hangup\n");
			res = -1;
			break;
		}

		ast_debug(10, "frame %d/%d, len=%d\n", inf->frametype, inf->subclass.integer, inf->datalen);

		if (inf->frametype == AST_FRAME_MODEM && inf->subclass.integer == AST_MODEM_T38) {
			t38_core_rx_ifp_packet(t38state, inf->data.ptr, inf->datalen, inf->seqno);
			if (last_state != t30state->state) {
				state_change = ast_tvnow();
				last_state = t30state->state;
			}
		} else if (inf->frametype == AST_FRAME_CONTROL && inf->subclass.integer == AST_CONTROL_T38_PARAMETERS) {
			struct ast_control_t38_parameters *parameters = inf->data.ptr;
			if (parameters->request_response == AST_T38_TERMINATED) {
				ast_debug(1, "T38 down, finishing\n");
				break;
			}
		}

		ast_frfree(inf);
		inf = NULL;
	}

	ast_debug(1, "Loop finished, res=%d\n", res);

	if (inf)
		ast_frfree(inf);

	t30_terminate(t30state);
	t38_terminal_release(&t38);

disable_t38:
	/* if we are not the caller, it's our job to shut down the T.38
	 * session when the FAX transmisson is complete.
	 */
	if ((s->caller_mode == FALSE) &&
	    (ast_channel_get_t38_state(s->chan) == T38_STATE_NEGOTIATED)) {
		struct ast_control_t38_parameters t38_parameters = { .request_response = AST_T38_REQUEST_TERMINATE, };

		if (ast_indicate_data(s->chan, AST_CONTROL_T38_PARAMETERS, &t38_parameters, sizeof(t38_parameters)) == 0) {
			/* wait up to five seconds for negotiation to complete */
			unsigned int timeout = 5000;
			int ms;

			ast_debug(1, "Shutting down T.38 on %s\n", ast_channel_name(s->chan));
			while (timeout > 0) {
				ms = ast_waitfor(s->chan, 1000);
				if (ms < 0) {
					ast_log(LOG_WARNING, "something bad happened while channel '%s' was polling.\n", ast_channel_name(s->chan));
					return -1;
				}
				if (!ms) {
					/* nothing happened */
					if (timeout > 0) {
						timeout -= 1000;
						continue;
					} else {
						ast_log(LOG_WARNING, "channel '%s' timed-out during the T.38 shutdown.\n", ast_channel_name(s->chan));
						break;
					}
				}
				if (!(inf = ast_read(s->chan))) {
					return -1;
				}
				if ((inf->frametype == AST_FRAME_CONTROL) &&
				    (inf->subclass.integer == AST_CONTROL_T38_PARAMETERS) &&
				    (inf->datalen == sizeof(t38_parameters))) {
					struct ast_control_t38_parameters *parameters = inf->data.ptr;

					switch (parameters->request_response) {
					case AST_T38_TERMINATED:
						ast_debug(1, "Shut down T.38 on %s\n", ast_channel_name(s->chan));
						break;
					case AST_T38_REFUSED:
						ast_log(LOG_WARNING, "channel '%s' refused to disable T.38\n", ast_channel_name(s->chan));
						break;
					default:
						ast_log(LOG_ERROR, "channel '%s' failed to disable T.38\n", ast_channel_name(s->chan));
						break;
					}
					ast_frfree(inf);
					break;
				}
				ast_frfree(inf);
			}
		}
	}

	return res;
}
Beispiel #2
0
static int t30_tests(int t38_mode, int use_gui, int log_audio, int test_sending, int g1050_model_no, int g1050_speed_pattern_no)
{
    t38_terminal_state_t *t38_state;
    fax_state_t *fax_state;
    int fast_send;
    int fast_send_tcf;
    int fast_blocks;
    int msg_len;
    int t30_len;
    int t31_len;
    int t38_version;
    int without_pacing;
    int use_tep;
    int seq_no;
    int i;
    int k;
    int outframes;
    uint8_t fast_buf[1000];
    uint8_t msg[1024];
    double tx_when;
    double rx_when;
    t30_state_t *t30;
    t38_core_state_t *t38_core;
    logging_state_t *logging;
    int16_t t30_amp[SAMPLES_PER_CHUNK];
    int16_t t31_amp[SAMPLES_PER_CHUNK];
    int16_t silence[SAMPLES_PER_CHUNK];
    int16_t out_amp[2*SAMPLES_PER_CHUNK];
    SNDFILE *wave_handle;
    SNDFILE *in_handle;

    /* Test the T.31 modem against the full FAX machine in spandsp */

    /* Set up the test environment */
    t38_version = 1;
    without_pacing = false;
    use_tep = false;

    wave_handle = NULL;
    if (log_audio)
    {
        if ((wave_handle = sf_open_telephony_write(OUTPUT_WAVE_FILE_NAME, 2)) == NULL)
        {
            fprintf(stderr, "    Cannot create audio file '%s'\n", OUTPUT_WAVE_FILE_NAME);
            exit(2);
        }
    }

    in_handle = NULL;
    if (decode_test_file)
    {
        if ((in_handle = sf_open_telephony_read(decode_test_file, 1)) == NULL)
        {
            fprintf(stderr, "    Cannot create audio file '%s'\n", decode_test_file);
            exit(2);
        }
    }

    srand48(0x1234567);
    if ((path_a_to_b = g1050_init(g1050_model_no, g1050_speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }
    if ((path_b_to_a = g1050_init(g1050_model_no, g1050_speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }

    t38_state = NULL;
    fax_state = NULL;
    if (test_sending)
    {
        if (t38_mode)
        {
            if ((t38_state = t38_terminal_init(NULL, false, t38_tx_packet_handler, t31_state)) == NULL)
            {
                fprintf(stderr, "Cannot start the T.38 channel\n");
                exit(2);
            }
            t30 = t38_terminal_get_t30_state(t38_state);
        }
        else
        {
            fax_state = fax_init(NULL, false);
            t30 = fax_get_t30_state(fax_state);
        }
        t30_set_rx_file(t30, OUTPUT_FILE_NAME, -1);
        fax_test_seq = fax_send_test_seq;
        countdown = 0;
    }
    else
    {
        if (t38_mode)
        {
            if ((t38_state = t38_terminal_init(NULL, true, t38_tx_packet_handler, t31_state)) == NULL)
            {
                fprintf(stderr, "Cannot start the T.38 channel\n");
                exit(2);
            }
            t30 = t38_terminal_get_t30_state(t38_state);
        }
        else
        {
            fax_state = fax_init(NULL, true);
            t30 = fax_get_t30_state(fax_state);
        }
        t30_set_tx_file(t30, INPUT_FILE_NAME, -1, -1);
        fax_test_seq = fax_receive_test_seq;
        countdown = 250;
    }

    if (t38_mode)
    {
        t38_core = t38_terminal_get_t38_core_state(t38_state);
        t38_set_t38_version(t38_core, t38_version);
        t38_terminal_set_config(t38_state, without_pacing);
        t38_terminal_set_tep_mode(t38_state, use_tep);
    }

    t30_set_tx_ident(t30, "11111111");
    t30_set_supported_modems(t30, T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17);
    //t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
    t30_set_phase_b_handler(t30, phase_b_handler, (void *) t30);
    t30_set_phase_d_handler(t30, phase_d_handler, (void *) t30);
    t30_set_phase_e_handler(t30, phase_e_handler, (void *) t30);

    if (t38_mode)
        logging = t38_terminal_get_logging_state(t38_state);
    else
        logging = t30_get_logging_state(t30);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, (t38_mode)  ?  "T.38"  :  "FAX");

    if (t38_mode)
    {
        t38_core = t38_terminal_get_t38_core_state(t38_state);
        span_log_set_level(&t38_core->logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(&t38_core->logging, "T.38");

        logging = t30_get_logging_state(t30);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "T.38");
    }
    else
    {
        logging = fax_get_logging_state(fax_state);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "FAX");
    }

    memset(silence, 0, sizeof(silence));
    memset(t30_amp, 0, sizeof(t30_amp));

    /* Now set up and run the T.31 modem */
    if ((t31_state = t31_init(NULL, at_tx_handler, NULL, modem_call_control, NULL, t31_tx_packet_handler, NULL)) == NULL)
    {
        fprintf(stderr, "    Cannot start the T.31 modem\n");
        exit(2);
    }
    logging = t31_get_logging_state(t31_state);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.31");

    logging = at_get_logging_state(t31_get_at_state(t31_state));
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.31");

    if (t38_mode)
    {
        t38_core = t31_get_t38_core_state(t31_state);
        logging = t38_core_get_logging_state(t38_core);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "T.31");

        t31_set_mode(t31_state, true);
        t38_set_t38_version(t38_core, t38_version);
    }

    fast_send = false;
    fast_send_tcf = true;
    fast_blocks = 0;
    kick = true;
#if defined(ENABLE_GUI)
    if (use_gui)
        start_media_monitor();
#endif
    while (!done)
    {
        if (countdown)
        {
            /* Deal with call setup, through the AT interface. */
            if (answered)
            {
                countdown = 0;
                t31_call_event(t31_state, AT_CALL_EVENT_ANSWERED);
            }
            else if (--countdown == 0)
            {
                t31_call_event(t31_state, AT_CALL_EVENT_ALERTING);
                countdown = 250;
            }
        }

        if (kick)
        {
            /* Work through the script */
            kick = false;
            if (fax_test_seq[test_seq_ptr].command > (const char *) 2)
            {
                if (fax_test_seq[test_seq_ptr].command[0])
                {
                    printf("%s\n", fax_test_seq[test_seq_ptr].command);
                    t31_at_rx(t31_state, fax_test_seq[test_seq_ptr].command, fax_test_seq[test_seq_ptr].len_command);
                }
            }
            else
            {
                if (fax_test_seq[test_seq_ptr].command == (const char *) 2)
                {
                    printf("Fast send TCF\n");
                    fast_send = true;
                    fast_send_tcf = true;
                    fast_blocks = 100;
                }
                else
                {
                    printf("Fast send image\n");
                    fast_send = true;
                    fast_send_tcf = false;
                    fast_blocks = 100;
                }
            }
        }
        if (fast_send)
        {
            /* Send fast modem data */
            if (fast_send_tcf)
            {
                /* If we are sending TCF, its simply zeros */
                memset(fast_buf, 0, 36);
                if (fast_blocks == 1)
                {
                    /* Tell the modem this is the end of the TCF data */
                    fast_buf[34] = DLE;
                    fast_buf[35] = ETX;
                }
            }
            else
            {
                /* If we are sending image data, we need to make it look like genuine image data,
                   with proper EOL and RTC markers. */
                if (fast_blocks > 1)
                {
                    /* Create a chunk of white page, 1728 pixels wide. */
                    for (i = 0;  i < 36;  i += 4)
                    {
                        fast_buf[i] = 0x00;
                        fast_buf[i + 1] = 0x80;
                        fast_buf[i + 2] = 0xB2;
                        fast_buf[i + 3] = 0x01;
                    }
                }
                else
                {
                    /* Create the end of page condition. */
                    for (i = 0;  i < 36;  i += 3)
                    {
                        fast_buf[i] = 0x00;
                        fast_buf[i + 1] = 0x08;
                        fast_buf[i + 2] = 0x80;
                    }
                    /* Tell the modem this is the end of the image data. */
                    fast_buf[34] = DLE;
                    fast_buf[35] = ETX;
                }
            }
            t31_at_rx(t31_state, (char *) fast_buf, 36);
            if (--fast_blocks == 0)
                fast_send = false;
        }

        if (t38_mode)
        {
            while ((msg_len = g1050_get(path_a_to_b, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
            {
#if defined(ENABLE_GUI)
                if (use_gui)
                    media_monitor_rx(seq_no, tx_when, rx_when);
#endif
                t38_core = t31_get_t38_core_state(t31_state);
                t38_core_rx_ifp_packet(t38_core, msg, msg_len, seq_no);
            }
            while ((msg_len = g1050_get(path_b_to_a, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
            {
#if defined(ENABLE_GUI)
                if (use_gui)
                    media_monitor_rx(seq_no, tx_when, rx_when);
#endif
                t38_core = t38_terminal_get_t38_core_state(t38_state);
                t38_core_rx_ifp_packet(t38_core, msg, msg_len, seq_no);
            }
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_update_display();
#endif
            /* Bump the G.1050 models along */
            when += (float) SAMPLES_PER_CHUNK/(float) SAMPLE_RATE;

            /* Bump things along on the t38_terminal side */
            span_log_bump_samples(t38_terminal_get_logging_state(t38_state), SAMPLES_PER_CHUNK);
            t38_core = t38_terminal_get_t38_core_state(t38_state);
            span_log_bump_samples(t38_core_get_logging_state(t38_core), SAMPLES_PER_CHUNK);

            t38_terminal_send_timeout(t38_state, SAMPLES_PER_CHUNK);
            t31_t38_send_timeout(t31_state, SAMPLES_PER_CHUNK);
        }
        else
        {
            t30_len = fax_tx(fax_state, t30_amp, SAMPLES_PER_CHUNK);
            /* The receive side always expects a full block of samples, but the
               transmit side may not be sending any when it doesn't need to. We
               may need to pad with some silence. */
            if (t30_len < SAMPLES_PER_CHUNK)
            {
                memset(t30_amp + t30_len, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t30_len));
                t30_len = SAMPLES_PER_CHUNK;
            }
            if (log_audio)
            {
                for (k = 0;  k < t30_len;  k++)
                    out_amp[2*k] = t30_amp[k];
            }
            if (t31_rx(t31_state, t30_amp, t30_len))
                break;
            t31_len = t31_tx(t31_state, t31_amp, SAMPLES_PER_CHUNK);
            if (t31_len < SAMPLES_PER_CHUNK)
            {
                memset(t31_amp + t31_len, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t31_len));
                t31_len = SAMPLES_PER_CHUNK;
            }
            if (log_audio)
            {
                for (k = 0;  k < t31_len;  k++)
                    out_amp[2*k + 1] = t31_amp[k];
            }
            if (fax_rx(fax_state, t31_amp, SAMPLES_PER_CHUNK))
                break;

            if (log_audio)
            {
                outframes = sf_writef_short(wave_handle, out_amp, SAMPLES_PER_CHUNK);
                if (outframes != SAMPLES_PER_CHUNK)
                    break;
            }

            /* Bump things along on the FAX machine side */
            span_log_bump_samples(fax_get_logging_state(fax_state), SAMPLES_PER_CHUNK);
        }

        /* Bump things along on the FAX machine side */
        span_log_bump_samples(t30_get_logging_state(t30), SAMPLES_PER_CHUNK);

        /* Bump things along on the T.31 modem side */
        t38_core = t31_get_t38_core_state(t31_state);
        span_log_bump_samples(t38_core_get_logging_state(t38_core), SAMPLES_PER_CHUNK);
        span_log_bump_samples(t31_get_logging_state(t31_state), SAMPLES_PER_CHUNK);
        span_log_bump_samples(at_get_logging_state(t31_get_at_state(t31_state)), SAMPLES_PER_CHUNK);
    }

    g1050_free(path_a_to_b);
    g1050_free(path_b_to_a);
    if (t38_mode)
        t38_terminal_free(t38_state);
    else
        fax_free(fax_state);
    t31_free(t31_state);

    if (decode_test_file)
    {
        if (sf_close_telephony(in_handle))
        {
            fprintf(stderr, "    Cannot close audio file '%s'\n", decode_test_file);
            exit(2);
        }
    }
    if (log_audio)
    {
        if (sf_close_telephony(wave_handle))
        {
            fprintf(stderr, "    Cannot close audio file '%s'\n", OUTPUT_WAVE_FILE_NAME);
            exit(2);
        }
    }

    if (!done  ||  !sequence_terminated)
    {
        printf("Tests failed\n");
        return -1;
    }

    return 0;
}
Beispiel #3
0
int main(int argc, char *argv[])
{
    int16_t silence[SAMPLES_PER_CHUNK];
    int16_t t30_amp[2][SAMPLES_PER_CHUNK];
    int16_t t38_amp[2][SAMPLES_PER_CHUNK];
    int16_t t38_amp_hist_a[8][SAMPLES_PER_CHUNK];
    int16_t t38_amp_hist_b[8][SAMPLES_PER_CHUNK];
    int16_t out_amp[SAMPLES_PER_CHUNK*4];
    int16_t *fax_rx_buf[2];
    int16_t *fax_tx_buf[2];
    int16_t *t38_gateway_rx_buf[2];
    int16_t *t38_gateway_tx_buf[2];
    int t30_len[2];
    int t38_len[2];
    int hist_ptr;
    int log_audio;
    int msg_len;
    uint8_t msg[1024];
    int outframes;
    SNDFILE *wave_handle;
    SNDFILE *input_wave_handle;
    int use_ecm;
    int use_tep;
    int feedback_audio;
    int use_transmit_on_idle;
    int t38_version;
    const char *input_tiff_file_name;
    const char *decode_file_name;
    int i;
    int j;
    int seq_no;
    int g1050_model_no;
    int g1050_speed_pattern_no;
    int t38_transport;
    double tx_when;
    double rx_when;
    int supported_modems;
    int remove_fill_bits;
    int opt;
    int start_page;
    int end_page;
    int drop_frame;
    int drop_frame_rate;
    float signal_scaling;
    int signal_level;
    int noise_level;
    int code_to_look_up;
    int scan_line_time;
    t38_stats_t t38_stats;
    t30_stats_t t30_stats;
    logging_state_t *logging;
    int expected_pages;
    char *page_header_info;
    char *page_header_tz;
    const char *tag;
    char buf[132 + 1];
#if defined(ENABLE_GUI)
    int use_gui;
#endif

#if defined(ENABLE_GUI)
    use_gui = FALSE;
#endif
    log_audio = FALSE;
    use_ecm = FALSE;
    t38_version = 1;
    input_tiff_file_name = INPUT_TIFF_FILE_NAME;
    t38_simulate_incrementing_repeats = FALSE;
    g1050_model_no = 0;
    g1050_speed_pattern_no = 1;
    remove_fill_bits = FALSE;
    use_tep = FALSE;
    feedback_audio = FALSE;
    use_transmit_on_idle = TRUE;
    supported_modems = T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17;
    page_header_info = NULL;
    page_header_tz = NULL;
    drop_frame = 0;
    drop_frame_rate = 0;
    start_page = -1;
    end_page = -1;
    signal_level = 0;
    noise_level = -99;
    scan_line_time = 0;
    decode_file_name = NULL;
    code_to_look_up = -1;
    t38_transport = T38_TRANSPORT_UDPTL;
    while ((opt = getopt(argc, argv, "c:d:D:efFgH:i:Ilm:M:n:p:s:tT:u:v:z:")) != -1)
    {
        switch (opt)
        {
        case 'c':
            code_to_look_up = atoi(optarg);
            break;
        case 'd':
            decode_file_name = optarg;
            break;
        case 'D':
            drop_frame_rate =
            drop_frame = atoi(optarg);
            break;
        case 'e':
            use_ecm = TRUE;
            break;
        case 'f':
            feedback_audio = TRUE;
            break;
        case 'F':
            remove_fill_bits = TRUE;
            break;
        case 'g':
#if defined(ENABLE_GUI)
            use_gui = TRUE;
#else
            fprintf(stderr, "Graphical monitoring not available\n");
            exit(2);
#endif
            break;
        case 'H':
            page_header_info = optarg;
            break;
        case 'i':
            input_tiff_file_name = optarg;
            break;
        case 'I':
            t38_simulate_incrementing_repeats = TRUE;
            break;
        case 'l':
            log_audio = TRUE;
            break;
        case 'm':
            supported_modems = atoi(optarg);
            break;
        case 'M':
            g1050_model_no = optarg[0] - 'A' + 1;
            break;
        case 'n':
            noise_level = atoi(optarg);
            break;
        case 'p':
            for (i = 0;  i < 2;  i++)
            {
                switch (optarg[i])
                {
                case 'A':
                    mode[i] = AUDIO_FAX;
                    break;
                case 'G':
                    mode[i] = T38_GATEWAY_FAX;
                    break;
                case 'T':
                    mode[i] = T38_TERMINAL_FAX;
                    break;
                default:
                    fprintf(stderr, "Unknown FAX path element %c\n", optarg[i]);
                    exit(2);
                }
            }
            if ((mode[0] == AUDIO_FAX  &&  mode[1] != AUDIO_FAX)
                ||
                (mode[0] != AUDIO_FAX  &&  mode[1] == AUDIO_FAX))
            {
                fprintf(stderr, "Invalid FAX path %s\n", optarg);
                exit(2);
            }
            break;
        case 's':
            g1050_speed_pattern_no = atoi(optarg);
            break;
#if 0
        case 's':
            signal_level = atoi(optarg);
            break;
#endif
        case 'S':
            scan_line_time = atoi(optarg);
            break;
        case 't':
            use_tep = TRUE;
            break;
        case 'T':
            start_page = 0;
            end_page = atoi(optarg);
            break;
        case 'u':
            if (strcasecmp(optarg, "udptl") == 0)
                t38_transport = T38_TRANSPORT_UDPTL;
            else if (strcasecmp(optarg, "rtp") == 0)
                t38_transport = T38_TRANSPORT_RTP;
            else if (strcasecmp(optarg, "tcp") == 0)
                t38_transport = T38_TRANSPORT_TCP;
            else if (strcasecmp(optarg, "tcp-tpkt") == 0)
                t38_transport = T38_TRANSPORT_TCP_TPKT;
            else
            {
                fprintf(stderr, "Unknown T.38 transport mode\n");
                exit(2);
            }
            break;
        case 'v':
            t38_version = atoi(optarg);
            break;
        case 'z':
            page_header_tz = optarg;
            break;
        default:
            //usage();
            exit(2);
            break;
        }
    }

    if (code_to_look_up >= 0)
    {
        printf("Result code %d is %s\n", code_to_look_up, t30_completion_code_to_str(code_to_look_up));
        exit(0);
    }

    printf("Using T.38 version %d\n", t38_version);
    if (use_ecm)
        printf("Using ECM\n");

    wave_handle = NULL;
    if (log_audio)
    {
        if ((wave_handle = sf_open_telephony_write(OUTPUT_WAVE_FILE_NAME, 4)) == NULL)
        {
            fprintf(stderr, "    Cannot create audio file '%s'\n", OUTPUT_WAVE_FILE_NAME);
            exit(2);
        }
    }
    memset(silence, 0, sizeof(silence));
 
    srand48(0x1234567);
    /* Set up the nodes */
    input_wave_handle = NULL;
    if (mode[0] == T38_TERMINAL_FAX)
    {
    }
    else
    {
        if (decode_file_name)
        {
            if ((input_wave_handle = sf_open_telephony_read(decode_file_name, 1)) == NULL)
            {
                fprintf(stderr, "    Cannot open audio file '%s'\n", decode_file_name);
                exit(2);
            }
        }
    }

    for (i = 0;  i < 2;  i++)
    {
        tag = (i == 0)  ?  "A"  :  "B";

        memset(&expected_rx_info[i], 0, sizeof(expected_rx_info[i]));
        if (mode[i] == T38_TERMINAL_FAX)
        {
            if ((t38_state[i] = t38_terminal_init(NULL, (i == 0), tx_packet_handler, (void *) (intptr_t) i)) == NULL)
            {
                fprintf(stderr, "Cannot start the T.38 terminal instance\n");
                exit(2);
            }
            t30_state[i] = t38_terminal_get_t30_state(t38_state[i]);
            t38_core_state[i] = t38_terminal_get_t38_core_state(t38_state[i]);

            logging = t38_terminal_get_logging_state(t38_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            logging = t38_core_get_logging_state(t38_core_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            logging = t30_get_logging_state(t30_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);
        }
        else
        {
            if ((fax_state[i] = fax_init(NULL, (i == 0))) == NULL)
            {
                fprintf(stderr, "Cannot start FAX instance\n");
                exit(2);
            }
            t30_state[i] = fax_get_t30_state(fax_state[i]);

            logging = fax_get_logging_state(fax_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            logging = fax_modems_get_logging_state(&fax_state[i]->modems);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            logging = t30_get_logging_state(t30_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            if (mode[i] == T38_GATEWAY_FAX)
            {
                if ((t38_gateway_state[i] = t38_gateway_init(NULL, tx_packet_handler, (void *) (intptr_t) i)) == NULL)
                {
                    fprintf(stderr, "Cannot start the T.38 gateway instancel\n");
                    exit(2);
                }
                t38_core_state[i] = t38_gateway_get_t38_core_state(t38_gateway_state[i]);

                logging = t38_gateway_get_logging_state(t38_gateway_state[i]);
                span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
                span_log_set_tag(logging, tag);

                logging = fax_modems_get_logging_state(&t38_gateway_state[i]->audio.modems);
                span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
                span_log_set_tag(logging, tag);

                logging = t38_core_get_logging_state(t38_core_state[i]);
                span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
                span_log_set_tag(logging, tag);

                fax_rx_buf[i] = t38_amp[i];
                fax_tx_buf[i] = t30_amp[i];
                t38_gateway_rx_buf[i] = t30_amp[i];
                t38_gateway_tx_buf[i] = t38_amp[i];
            }
            else
            {
                fax_rx_buf[i] = t30_amp[i];
                fax_tx_buf[i] = t30_amp[i ^ 1];
                t38_gateway_rx_buf[i] = NULL;
                t38_gateway_tx_buf[i] = NULL;
            }
            awgn_state[i] = NULL;
            signal_scaling = 1.0f;
            if (noise_level > -99)
            {
                awgn_state[i] = awgn_init_dbm0(NULL, 1234567, noise_level);
                signal_scaling = powf(10.0f, signal_level/20.0f);
                printf("Signal scaling %f\n", signal_scaling);
            }
        }
        set_t30_callbacks(t30_state[i], i);
    }
    /* Set up the channels */
    for (i = 0;  i < 2;  i++)
    {
        if ((g1050_path[i] = g1050_init(g1050_model_no, g1050_speed_pattern_no, 100, 33)) == NULL)
        {
            fprintf(stderr, "Failed to start IP network path model\n");
            exit(2);
        }
        memset(audio_buffer[2*i], 0, SAMPLES_PER_CHUNK*sizeof(int16_t));
        memset(audio_buffer[2*i + 1], 0, SAMPLES_PER_CHUNK*sizeof(int16_t));
        memset(t30_amp[i], 0, sizeof(t30_amp[i]));
        memset(t38_amp[i], 0, sizeof(t38_amp[i]));
    }
    memset(t38_amp_hist_a, 0, sizeof(t38_amp_hist_a));
    memset(t38_amp_hist_b, 0, sizeof(t38_amp_hist_b));

    for (i = 0;  i < 2;  i++)
    {
        j = i + 1;
        sprintf(buf, "%d%d%d%d%d%d%d%d", j, j, j, j, j, j, j, j);
        t30_set_tx_ident(t30_state[i], buf);
        strcpy(expected_rx_info[i ^ 1].ident, buf);
        sprintf(buf, "Sub-address %d", j);
        t30_set_tx_sub_address(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].sub_address, buf);
        sprintf(buf, "Sender ID %d", j);
        t30_set_tx_sender_ident(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].sender_ident, buf);
        sprintf(buf, "Password %d", j);
        t30_set_tx_password(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].password, buf);
        sprintf(buf, "Polled sub-add %d", j);
        t30_set_tx_polled_sub_address(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].polled_sub_address, buf);
        sprintf(buf, "Select poll add %d", j);
        t30_set_tx_selective_polling_address(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].selective_polling_address, buf);
        t30_set_tx_page_header_info(t30_state[i], page_header_info);
        if (page_header_tz)
            t30_set_tx_page_header_tz(t30_state[i], page_header_tz);

        if ((i & 1) == 1)
        {
            t30_set_tx_nsf(t30_state[i], (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
            expected_rx_info[i ^ 1].nsf = (uint8_t *) "\x50\x00\x00\x00Spandsp\x00";
            expected_rx_info[i ^ 1].nsf_len = 12;
        }

        t30_set_supported_modems(t30_state[i], supported_modems);
        t30_set_supported_t30_features(t30_state[i],
                                       T30_SUPPORT_IDENTIFICATION
                                     | T30_SUPPORT_SELECTIVE_POLLING
                                     | T30_SUPPORT_SUB_ADDRESSING);
        t30_set_supported_image_sizes(t30_state[i],
                                      T30_SUPPORT_US_LETTER_LENGTH
                                    | T30_SUPPORT_US_LEGAL_LENGTH
                                    | T30_SUPPORT_UNLIMITED_LENGTH
                                    | T30_SUPPORT_215MM_WIDTH
                                    | T30_SUPPORT_255MM_WIDTH
                                    | T30_SUPPORT_303MM_WIDTH);
        t30_set_supported_resolutions(t30_state[i],
                                      T30_SUPPORT_STANDARD_RESOLUTION
                                    | T30_SUPPORT_FINE_RESOLUTION
                                    | T30_SUPPORT_SUPERFINE_RESOLUTION
                                    | T30_SUPPORT_R8_RESOLUTION
                                    | T30_SUPPORT_R16_RESOLUTION
                                    | T30_SUPPORT_300_300_RESOLUTION
                                    | T30_SUPPORT_400_400_RESOLUTION
                                    | T30_SUPPORT_600_600_RESOLUTION
                                    | T30_SUPPORT_1200_1200_RESOLUTION
                                    | T30_SUPPORT_300_600_RESOLUTION
                                    | T30_SUPPORT_400_800_RESOLUTION
                                    | T30_SUPPORT_600_1200_RESOLUTION);

        t30_set_ecm_capability(t30_state[i], use_ecm);
        if (use_ecm)
            t30_set_supported_compressions(t30_state[i], T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);
        t30_set_minimum_scan_line_time(t30_state[i], scan_line_time);

        if (mode[i] == T38_GATEWAY_FAX)
        {
            t38_gateway_set_transmit_on_idle(t38_gateway_state[i], use_transmit_on_idle);
            t38_gateway_set_supported_modems(t38_gateway_state[i], supported_modems);
            //t38_gateway_set_nsx_suppression(t38_state[i], NULL, 0, NULL, 0);
            t38_gateway_set_fill_bit_removal(t38_gateway_state[i], remove_fill_bits);
            t38_gateway_set_real_time_frame_handler(t38_gateway_state[i], real_time_gateway_frame_handler, (void *) (intptr_t) i);
            t38_gateway_set_ecm_capability(t38_gateway_state[i], use_ecm);
        }
        if (mode[i] != AUDIO_FAX)
        {
            t38_set_t38_version(t38_core_state[i], t38_version);
        }

        if (mode[i] == T38_TERMINAL_FAX)
        {
            //t30_set_iaf_mode(t30_state[i], T30_IAF_MODE_NO_FILL_BITS);
            switch (t38_transport)
            {
            case T38_TRANSPORT_UDPTL:
            case T38_TRANSPORT_RTP:
                t38_terminal_set_fill_bit_removal(t38_state[i], remove_fill_bits);
                t38_terminal_set_tep_mode(t38_state[i], use_tep);
                break;
            case T38_TRANSPORT_TCP:
            case T38_TRANSPORT_TCP_TPKT:
                t38_terminal_set_fill_bit_removal(t38_state[i], TRUE);
                t38_terminal_set_config(t38_state[i], T38_TERMINAL_OPTION_NO_PACING | T38_TERMINAL_OPTION_NO_INDICATORS);
                t38_terminal_set_tep_mode(t38_state[i], FALSE);
                break;
            }
        }
        else
        {
            fax_set_transmit_on_idle(fax_state[i], use_transmit_on_idle);
            fax_set_tep_mode(fax_state[i], use_tep);
        }
    }

    t30_set_tx_file(t30_state[0], input_tiff_file_name, start_page, end_page);
    t30_set_rx_file(t30_state[1], OUTPUT_TIFF_FILE_NAME, -1);

#if defined(ENABLE_GUI)
    if (use_gui)
        start_media_monitor();
#endif
    hist_ptr = 0;
    for (;;)
    {
        memset(out_amp, 0, sizeof(out_amp));

        for (i = 0;  i < 2;  i++)
        {
            /* Update T.30 timing */
            logging = t30_get_logging_state(t30_state[i]);
            span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

            if (mode[i] == T38_TERMINAL_FAX)
            {
                /* Update T.38 termination timing */
                logging = t38_terminal_get_logging_state(t38_state[i]);
                span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
                logging = t38_core_get_logging_state(t38_core_state[i]);
                span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

                completed[i] = t38_terminal_send_timeout(t38_state[i], SAMPLES_PER_CHUNK);
            }
            else
            {
                /* Update audio FAX timing */
                logging = fax_get_logging_state(fax_state[i]);
                span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

                fax_rx(fax_state[i], fax_rx_buf[i], SAMPLES_PER_CHUNK);
                if (!t30_call_active(t30_state[i]))
                {
                    completed[i] = TRUE;
                    continue;
                }

                if (i == 0  &&  input_wave_handle)
                {
                    t30_len[i] = sf_readf_short(input_wave_handle, fax_tx_buf[i], SAMPLES_PER_CHUNK);
                    if (t30_len[i] == 0)
                        break;
                }
                else
                {
                    t30_len[i] = fax_tx(fax_state[i], fax_tx_buf[i], SAMPLES_PER_CHUNK);
                    if (!use_transmit_on_idle)
                    {
                        /* The receive side always expects a full block of samples, but the
                           transmit side may not be sending any when it doesn't need to. We
                           may need to pad with some silence. */
                        if (t30_len[i] < SAMPLES_PER_CHUNK)
                        {
                            memset(t30_amp[i] + t30_len[i], 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t30_len[i]));
                            t30_len[i] = SAMPLES_PER_CHUNK;
                        }
                    }
                    if (awgn_state[i])
                    {
                        for (j = 0;  j < t30_len[i];  j++)
                            fax_tx_buf[i][j] = ((int16_t) (fax_tx_buf[i][j]*signal_scaling)) + awgn(awgn_state[i]);
                    }
                }
                if (log_audio)
                {
                    for (j = 0;  j < t30_len[i];  j++)
                        out_amp[4*j + 2*i] = t30_amp[i][j];
                }
                if (feedback_audio)
                {
                    for (j = 0;  j < t30_len[i];  j++)
                        t30_amp[i][j] += t38_amp_hist_a[hist_ptr][j] >> 1;
                    memcpy(t38_amp_hist_a[hist_ptr], t38_amp[i], sizeof(int16_t)*SAMPLES_PER_CHUNK);
                }

                if (mode[i] == T38_GATEWAY_FAX)
                {
                    /* Update T.38 gateway timing */
                    logging = t38_gateway_get_logging_state(t38_gateway_state[i]);
                    span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
                    logging = t38_core_get_logging_state(t38_core_state[i]);
                    span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

                    if (drop_frame_rate  &&  --drop_frame == 0)
                    {
                        drop_frame = drop_frame_rate;
                        if (t38_gateway_rx_fillin(t38_gateway_state[i], SAMPLES_PER_CHUNK))
                            break;
                    }
                    else
                    {
                        if (t38_gateway_rx(t38_gateway_state[i], t38_gateway_rx_buf[i], SAMPLES_PER_CHUNK))
                            break;
                    }

                    t38_len[i] = t38_gateway_tx(t38_gateway_state[i], t38_gateway_tx_buf[i], SAMPLES_PER_CHUNK);
                    if (!use_transmit_on_idle)
                    {
                        if (t38_len[i] < SAMPLES_PER_CHUNK)
                        {
                            memset(t38_amp[i] + t38_len[i], 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t38_len[i]));
                            t38_len[i] = SAMPLES_PER_CHUNK;
                        }
                    }
                    if (feedback_audio)
                    {
                        for (j = 0;  j < t30_len[i];  j++)
                            t30_amp[i][j] += t38_amp_hist_a[hist_ptr][j] >> 1;
                        memcpy(t38_amp_hist_a[hist_ptr], t38_amp[i], sizeof(int16_t)*SAMPLES_PER_CHUNK);
                    }

                    if (log_audio)
                    {
                        for (j = 0;  j < t38_len[i];  j++)
                            out_amp[4*j + 2*i + 1] = t38_amp[i][j];
                    }
                }
            }
            if (mode[i] != AUDIO_FAX)
            {
                while ((msg_len = g1050_get(g1050_path[i], msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
                {
#if defined(ENABLE_GUI)
                    if (use_gui)
                        media_monitor_rx(seq_no, tx_when, rx_when);
#endif
                   t38_core_rx_ifp_packet(t38_core_state[i ^ 1], msg, msg_len, seq_no);
                }
            }
        }
        if (log_audio)
        {
            outframes = sf_writef_short(wave_handle, out_amp, SAMPLES_PER_CHUNK);
            if (outframes != SAMPLES_PER_CHUNK)
                break;
        }

        when += (float) SAMPLES_PER_CHUNK/(float) SAMPLE_RATE;

        if (completed[0]  &&  completed[1])
            break;
#if defined(ENABLE_GUI)
        if (use_gui)
            media_monitor_update_display();
#endif
        if (++hist_ptr > 3)
            hist_ptr = 0;
    }
int main(int argc, char *argv[])
{
    int msg_len;
    uint8_t msg[1024];
    int t38_version;
    int seq_no;
    int use_ecm;
    int without_pacing;
    int use_tep;
    int model_no;
    int speed_pattern_no;
    const char *input_file_name;
    double tx_when;
    double rx_when;
    int use_gui;
    int supported_modems;
    int opt;
    t30_state_t *t30;
    t38_core_state_t *t38_core;
    logging_state_t *logging;

    t38_version = 1;
    without_pacing = FALSE;
    use_tep = FALSE;
    input_file_name = INPUT_FILE_NAME;
    use_ecm = FALSE;
    simulate_incrementing_repeats = FALSE;
    model_no = 0;
    speed_pattern_no = 1;
    use_gui = FALSE;
    supported_modems = T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17;
    while ((opt = getopt(argc, argv, "efgi:Im:M:ps:tv:")) != -1)
    {
        switch (opt)
        {
        case 'e':
            use_ecm = TRUE;
            break;
        case 'g':
#if defined(ENABLE_GUI)
            use_gui = TRUE;
#else
            fprintf(stderr, "Graphical monitoring not available\n");
            exit(2);
#endif
            break;
        case 'i':
            input_file_name = optarg;
            break;
        case 'I':
            simulate_incrementing_repeats = TRUE;
            break;
        case 'm':
            supported_modems = atoi(optarg);
            break;
        case 'M':
            model_no = optarg[0] - 'A' + 1;
            break;
        case 'p':
            without_pacing = TRUE;
            break;
        case 's':
            speed_pattern_no = atoi(optarg);
            break;
        case 't':
            use_tep = TRUE;
            break;
        case 'v':
            t38_version = atoi(optarg);
            break;
        default:
            //usage();
            exit(2);
            break;
        }
    }

    printf("Using T.38 version %d\n", t38_version);
    if (use_ecm)
        printf("Using ECM\n");

    srand48(0x1234567);
    if ((path_a_to_b = g1050_init(model_no, speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }
    if ((path_b_to_a = g1050_init(model_no, speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }

    if ((t38_state_a = t38_terminal_init(NULL, TRUE, tx_packet_handler_a, t38_state_b)) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t30 = t38_terminal_get_t30_state(t38_state_a);
    t38_core = t38_terminal_get_t38_core_state(t38_state_a);
    t38_set_t38_version(t38_core, t38_version);
    t38_terminal_set_config(t38_state_a, without_pacing);
    t38_terminal_set_tep_mode(t38_state_a, use_tep);
    
    logging = t38_terminal_get_logging_state(t38_state_a);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    logging = t38_core_get_logging_state(t38_core);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    logging = t30_get_logging_state(t30);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    t30_set_supported_modems(t30, supported_modems);
    t30_set_tx_ident(t30, "11111111");
    t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
    t30_set_tx_file(t30, input_file_name, -1, -1);
    t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) 'A');
    t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) 'A');
    t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) 'A');
    t30_set_ecm_capability(t30, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

    if ((t38_state_b = t38_terminal_init(NULL, FALSE, tx_packet_handler_b, t38_state_a)) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t30 = t38_terminal_get_t30_state(t38_state_b);
    t38_core = t38_terminal_get_t38_core_state(t38_state_b);
    t38_set_t38_version(t38_core, t38_version);
    t38_terminal_set_config(t38_state_b, without_pacing);
    t38_terminal_set_tep_mode(t38_state_b, use_tep);

    logging = t38_terminal_get_logging_state(t38_state_b);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-B");

    logging = t38_core_get_logging_state(t38_core);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-B");

    logging = t30_get_logging_state(t30);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-B");

    t30_set_supported_modems(t30, supported_modems);
    t30_set_tx_ident(t30, "22222222");
    t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
    t30_set_rx_file(t30, OUTPUT_FILE_NAME, -1);
    t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) 'B');
    t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) 'B');
    t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) 'B');
    t30_set_ecm_capability(t30, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

#if defined(ENABLE_GUI)
    if (use_gui)
        start_media_monitor();
#endif
    for (;;)
    {
        logging = t38_terminal_get_logging_state(t38_state_a);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t38_core = t38_terminal_get_t38_core_state(t38_state_a);
        logging = t38_core_get_logging_state(t38_core);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t30 = t38_terminal_get_t30_state(t38_state_a);
        logging = t30_get_logging_state(t30);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        logging = t38_terminal_get_logging_state(t38_state_b);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t38_core = t38_terminal_get_t38_core_state(t38_state_b);
        logging = t38_core_get_logging_state(t38_core);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t30 = t38_terminal_get_t30_state(t38_state_b);
        logging = t30_get_logging_state(t30);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

        done[0] = t38_terminal_send_timeout(t38_state_a, SAMPLES_PER_CHUNK);
        done[1] = t38_terminal_send_timeout(t38_state_b, SAMPLES_PER_CHUNK);

        when += (float) SAMPLES_PER_CHUNK/(float) SAMPLE_RATE;

        while ((msg_len = g1050_get(path_a_to_b, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
        {
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_rx(seq_no, tx_when, rx_when);
#endif
            t38_core = t38_terminal_get_t38_core_state(t38_state_b);
            t38_core_rx_ifp_packet(t38_core, msg, msg_len, seq_no);
        }
        while ((msg_len = g1050_get(path_b_to_a, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
        {
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_rx(seq_no, tx_when, rx_when);
#endif
            t38_core = t38_terminal_get_t38_core_state(t38_state_a);
            t38_core_rx_ifp_packet(t38_core, msg, msg_len, seq_no);
        }
        if (done[0]  &&  done[1])
            break;
#if defined(ENABLE_GUI)
        if (use_gui)
            media_monitor_update_display();
#endif
    }
    t38_terminal_release(t38_state_a);
    t38_terminal_release(t38_state_b);
    if (!succeeded[0]  ||  !succeeded[1])
    {
        printf("Tests failed\n");
        exit(2);
    }
    printf("Tests passed\n");
    return  0;
}