//-----------------------------------------------------------------------------
int ctkWorkflowTest2(int argc, char * argv [] )
{
QApplication app(argc, argv);
int defaultTime = 100;
// create the steps and the workflow
ctkWorkflow *workflow = new ctkWorkflow();
ctkWorkflowStep *step1 = new ctkWorkflowStep(workflow, "Step 1");
step1->setName("Step 1");
step1->setDescription("Description for step 1");
ctkWorkflowStep *step2 = new ctkWorkflowStep(workflow, "Step 2");
step2->setName("Step 2");
step2->setDescription("Description for step 2");
ctkWorkflowStep *step3 = new ctkWorkflowStep(workflow, "Step 3");
step3->setName("Step 3");
step3->setDescription("Description for step 3");
ctkWorkflowStep *step4 = new ctkWorkflowStep(workflow, "Step 4");
step4->setName("Step 4");
step4->setDescription("Description for step 4");
// create the qObjects that implement the required functions, and
// communicate with the workflow using signals and slots
ctkExampleWorkflowStepUsingSignalsAndSlots* qObject1 = new ctkExampleWorkflowStepUsingSignalsAndSlots;
ctkExampleWorkflowStepUsingSignalsAndSlots* qObject2 = new ctkExampleWorkflowStepUsingSignalsAndSlots;
ctkExampleWorkflowStepUsingSignalsAndSlots* qObject3 = new ctkExampleWorkflowStepUsingSignalsAndSlots;
ctkExampleWorkflowStepUsingSignalsAndSlots* qObject4 = new ctkExampleWorkflowStepUsingSignalsAndSlots;
// use the qObjects for validation
QObject::connect(step1->ctkWorkflowStepQObject(), SIGNAL(invokeValidateCommand(const QString&)), qObject1, SLOT(validate(const QString&)));
QObject::connect(qObject1, SIGNAL(validationComplete(bool, const QString&)), workflow, SLOT(evaluateValidationResults(bool, const QString&)));
QObject::connect(step2->ctkWorkflowStepQObject(), SIGNAL(invokeValidateCommand(const QString&)), qObject2, SLOT(validate(const QString&)));
QObject::connect(qObject2, SIGNAL(validationComplete(bool, const QString&)), workflow, SLOT(evaluateValidationResults(bool, const QString&)));
// step 3's validation will always fail
QObject::connect(step3->ctkWorkflowStepQObject(), SIGNAL(invokeValidateCommand(const QString&)), qObject3, SLOT(validateFails()));
QObject::connect(qObject3, SIGNAL(validationComplete(bool, const QString&)), workflow, SLOT(evaluateValidationResults(bool, const QString&)));
QObject::connect(step4->ctkWorkflowStepQObject(), SIGNAL(invokeValidateCommand(const QString&)), qObject4, SLOT(validate(const QString&)));
QObject::connect(qObject4, SIGNAL(validationComplete(bool, const QString&)), workflow, SLOT(evaluateValidationResults(bool, const QString&)));
// use the qObjects for entry processing
QObject::connect(step1->ctkWorkflowStepQObject(), SIGNAL(invokeOnEntryCommand(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)), qObject1, SLOT(onEntry(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)));
QObject::connect(qObject1, SIGNAL(onEntryComplete()), workflow, SLOT(processingAfterOnEntry()));
QObject::connect(step2->ctkWorkflowStepQObject(), SIGNAL(invokeOnEntryCommand(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)), qObject2, SLOT(onEntry(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)));
QObject::connect(qObject2, SIGNAL(onEntryComplete()), workflow, SLOT(processingAfterOnEntry()));
QObject::connect(step3->ctkWorkflowStepQObject(), SIGNAL(invokeOnEntryCommand(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)), qObject3, SLOT(onEntry(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)));
QObject::connect(qObject3, SIGNAL(onEntryComplete()), workflow, SLOT(processingAfterOnEntry()));
QObject::connect(step4->ctkWorkflowStepQObject(), SIGNAL(invokeOnEntryCommand(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)), qObject4, SLOT(onEntry(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)));
QObject::connect(qObject4, SIGNAL(onEntryComplete()), workflow, SLOT(processingAfterOnEntry()));
// use the qObjects for exit processing
QObject::connect(step1->ctkWorkflowStepQObject(), SIGNAL(invokeOnExitCommand(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)), qObject1, SLOT(onExit(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)));
QObject::connect(qObject1, SIGNAL(onExitComplete()), workflow, SLOT(processingAfterOnExit()));
QObject::connect(step2->ctkWorkflowStepQObject(), SIGNAL(invokeOnExitCommand(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)), qObject2, SLOT(onExit(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)));
QObject::connect(qObject2, SIGNAL(onExitComplete()), workflow, SLOT(processingAfterOnExit()));
QObject::connect(step3->ctkWorkflowStepQObject(), SIGNAL(invokeOnExitCommand(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)), qObject3, SLOT(onExit(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)));
QObject::connect(qObject3, SIGNAL(onExitComplete()), workflow, SLOT(processingAfterOnExit()));
QObject::connect(step4->ctkWorkflowStepQObject(), SIGNAL(invokeOnExitCommand(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)), qObject4, SLOT(onExit(const ctkWorkflowStep*, const ctkWorkflowInterstepTransition::InterstepTransitionType)));
QObject::connect(qObject4, SIGNAL(onExitComplete()), workflow, SLOT(processingAfterOnExit()));
step1->setHasValidateCommand(1);
step2->setHasValidateCommand(1);
step3->setHasValidateCommand(1);
step4->setHasValidateCommand(1);
step1->setHasOnEntryCommand(1);
step2->setHasOnEntryCommand(1);
step3->setHasOnEntryCommand(1);
step4->setHasOnEntryCommand(1);
step1->setHasOnExitCommand(1);
step2->setHasOnExitCommand(1);
step3->setHasOnExitCommand(1);
step4->setHasOnExitCommand(1);
// set the initial step (which sets the initial state)
workflow->setInitialStep(step1);
// add the first and second steps
if (!workflow->addTransition(step1, step2))
{
std::cerr << "could not add 1st and 2nd step" << std::endl;
return EXIT_FAILURE;
}
// add the third step
if (!workflow->addTransition(step2, step3))
{
std::cerr << "could not add 3rd step" << std::endl;
return EXIT_FAILURE;
}
// add the fourth step
if (!workflow->addTransition(step3, step4))
{
std::cerr << "could not add 4rd step" << std::endl;
return EXIT_FAILURE;
}
// start the workflow
if (!testStartWorkflow(workflow, defaultTime, app, 1, step1, qObject1, true, 0, qObject2, 0, 0, qObject3, 0, 0, qObject4, 0, 0))
{
std::cerr << "error starting workflow";
return EXIT_FAILURE;
}
// trigger transition to the next step
workflow->goForward();
if (!transitionTest(workflow, defaultTime, app, step2, qObject1, 1, 1, qObject2, 1, 0, qObject3, 0, 0, qObject4, 0, 0))
{
std::cerr << "error transitioning to step 2";
return EXIT_FAILURE;
}
// trigger transition to the next step
workflow->goForward();
if (!transitionTest(workflow, defaultTime, app, step3, qObject1, 1, 1, qObject2, 1, 1, qObject3, 1, 0, qObject4, 0, 0))
{
std::cerr << "error transitioning to step 3";
return EXIT_FAILURE;
}
// trigger transition to the next state (this should fail!)
workflow->goForward();
if (!transitionTest(workflow, defaultTime, app, step3, qObject1, 1, 1, qObject2, 1, 1, qObject3, 1, 0, qObject4, 0, 0))
{
std::cerr << "error after transition failure at step 3";
return EXIT_FAILURE;
}
// make sure the workflow stops properly
if (!testStopWorkflow(workflow, defaultTime, app, qObject1, 1, 1, qObject2, 1, 1, qObject3, 1, 1, qObject4, 0, 0))
{
std::cerr << "error after stopping workflow";
return EXIT_FAILURE;
}
// handles deletions of the workflow, steps, states and transitions
delete workflow;
return EXIT_SUCCESS;
}
//-----------------------------------------------------------------------------
int ctkWorkflowTest1(int argc, char * argv [] )
{
QApplication app(argc, argv);
int defaultTime = 100;
// create two steps and the workflow
ctkWorkflow *workflow = new ctkWorkflow();
ctkExampleDerivedWorkflowStep *step1 = new ctkExampleDerivedWorkflowStep(workflow, "Step 1");
step1->setName("Step 1");
step1->setDescription("Description for step 1");
ctkExampleDerivedWorkflowStep *step2 = new ctkExampleDerivedWorkflowStep(workflow, "Step 2");
step2->setName("Step 2");
step2->setDescription("Description for step 2");
// --------------------------------------------------------------------------
// try to add a transition for a step with the same id
ctkExampleDerivedWorkflowStep *step1Duplicated = new ctkExampleDerivedWorkflowStep(workflow, "Step 1");
if (workflow->addTransition(step1, step1Duplicated))
{
std::cerr << "workflow connected two steps with the same id";
return EXIT_FAILURE;
}
// try to add a transition from a step to itself
if (workflow->addTransition(step1, step1))
{
std::cerr << "workflow connected two steps with the same id";
return EXIT_FAILURE;
}
// --------------------------------------------------------------------------
// workflow with no steps
// try erroneously starting with no steps
if (!testStartWorkflow(workflow, defaultTime, app, 0))
{
std::cerr << "empty workflow is running after start()";
return EXIT_FAILURE;
}
// add the first step
if (!workflow->addTransition(step1, 0))
{
std::cerr << "could not add first step";
return EXIT_FAILURE;
}
// try erroneously starting with no initial step
if (!testStartWorkflow(workflow, defaultTime, app, 0))
{
std::cerr << "workflow is running after start() with no initial step";
return EXIT_FAILURE;
}
// --------------------------------------------------------------------------
// workflow with one step
// set the initial step (which sets the initial state)
workflow->setInitialStep(step1);
// try starting with one step
if (!testStartWorkflow(workflow, defaultTime, app, 1, step1, step1, 1, 0, step2, 0, 0))
{
std::cerr << "workflow is not running after start() with a single step";
return EXIT_FAILURE;
}
// triggering ValidationTransition and TransitionToPreviousStep
// should keep us in the same step, when there is only one step
workflow->goForward();
if (!transitionTest(workflow, defaultTime, app, step1, step1, 1, 0, step2, 0, 0))
{
std::cerr << "error in validation transition in a workflow with a single step";
return EXIT_FAILURE;
}
// transition to the previous step
workflow->goBackward();
if (!transitionTest(workflow, defaultTime, app, step1, step1, 1, 0, step2, 0, 0))
{
std::cerr << "error after transition to previous step in a workflow with a single step";
return EXIT_FAILURE;
}
// stop the workflow
if (!testStopWorkflow(workflow, defaultTime, app, step1, 1, 1, step2, 0, 0))
{
std::cerr << "workflow with one step still running after stop";
return EXIT_FAILURE;
}
// --------------------------------------------------------------------------
// workflow with two steps
// add the second step
if (!workflow->addTransition(step1, step2))
{
std::cerr << "could not add second step";
return EXIT_FAILURE;
}
// start the workflow
if (!testStartWorkflow(workflow, defaultTime, app, 1, step1, step1, 2, 1, step2, 0, 0))
{
std::cerr << "workflow is not running after start() with two steps";
return EXIT_FAILURE;
}
// make sure the workflow has the steps
if (!workflow->hasStep(step1->id()))
{
std::cerr << "Step1 not added to workflow";
return EXIT_FAILURE;
}
if (!workflow->hasStep(step2->id()))
{
std::cerr << "Step2 not added to workflow";
return EXIT_FAILURE;
}
// if (workflow->numberOfSteps() != 2)
// {
// std::cerr << "workflow has " << workflow->numberOfSteps() << " steps, not 2";
// return EXIT_FAILURE;
// }
// Test that the workflow transitions from processing to validation state
workflow->goForward();
if (!transitionTest(workflow, defaultTime, app, step2, step1, 2, 2, step2, 1, 0))
{
std::cerr << "error transitioning to next step in workflow with two steps";
return EXIT_FAILURE;
}
// Test that the workflow transitions back to the previous step
workflow->goBackward();
if (!transitionTest(workflow, defaultTime, app, step1, step1, 3, 2, step2, 1, 1))
{
std::cerr << "error transitioning to previous step in workflow with step steps";
return EXIT_FAILURE;
}
// make sure the workflow stops properly
if (!testStopWorkflow(workflow, defaultTime, app, step1, 3, 3, step2, 1, 1))
{
std::cerr << "workflow with two steps is running after stop()";
return EXIT_FAILURE;
}
// --------------------------------------------------------------------------
// workflow with three steps
// add a third step manually
ctkExampleDerivedWorkflowStep *step3 = new ctkExampleDerivedWorkflowStep(workflow, "Step 3");
step3->setName("Step 3");
step3->setDescription("Description for step 3");
if (!workflow->addTransition(step2, step3, "", ctkWorkflow::Forward))
{
std::cerr << "could not add step 3 with forward transition";
return EXIT_FAILURE;
}
if (!workflow->addTransition(step2, step3, "", ctkWorkflow::Backward))
{
std::cerr << "could not add next transition between step2 and step 3";
return EXIT_FAILURE;
}
if (workflow->forwardSteps(step1).length() != 1
|| workflow->forwardSteps(step1).first() != step2
|| workflow->forwardSteps(step2).length() != 1
|| workflow->forwardSteps(step2).first() != step3
|| workflow->forwardSteps(step3).length() != 0)
{
std::cerr << "error in list of forward steps" << std::endl;
return EXIT_FAILURE;
}
if (workflow->backwardSteps(step1).length() != 0
|| workflow->backwardSteps(step2).length() != 1
|| workflow->backwardSteps(step2).first() != step1
|| workflow->backwardSteps(step3).length() != 1
|| workflow->backwardSteps(step3).first() != step2)
{
std::cerr << "error in list of backward steps" << std::endl;
return EXIT_FAILURE;
}
if (!workflow->hasStep(step3->id()))
{
std::cerr << "Step3 not added to workflow";
return EXIT_FAILURE;
}
// if (workflow->numberOfSteps() != 3)
// {
// std::cerr << "workflow has " << workflow->numberOfSteps() << " steps, not 2";
// return EXIT_FAILURE;
// }
// now that we've stopped and restarted the state machine, we should
// be back in the initial step (step 1)
if (!testStartWorkflow(workflow, defaultTime, app, 1, step1, step1, 4, 3, step2, 1, 1, step3, 0, 0))
{
std::cerr << "workflow is not running after start() with three steps";
return EXIT_FAILURE;
}
// test to make sure our lists of forward and backwards steps is correct
if (!workflow->canGoForward(step1)
|| workflow->canGoBackward(step1)
|| !workflow->canGoForward(step2)
|| !workflow->canGoBackward(step2)
|| workflow->canGoForward(step3)
|| !workflow->canGoBackward(step3))
{
std::cerr << "error in can go forward/backward" << std::endl;
return EXIT_FAILURE;
}
// Test that the workflow transitions from step1 to step 2 to step 3
workflow->goForward();
QTimer::singleShot(defaultTime, &app, SLOT(quit()));
app.exec();
workflow->goForward();
if (!transitionTest(workflow, defaultTime, app, step3, step1, 4, 4, step2, 2, 2, step3, 1, 0))
{
std::cerr << "error transitioning to step3 in workflow with three steps";
return EXIT_FAILURE;
}
// Test that the workflow transitions back to the previous step
workflow->goBackward();
if (!transitionTest(workflow, defaultTime, app, step2, step1, 4, 4, step2, 3, 2, step3, 1, 1))
{
std::cerr << "error transitioning to previous step in workflow with three steps";
return EXIT_FAILURE;
}
// make sure the workflow stops properly
if (!testStopWorkflow(workflow, defaultTime, app, step1, 4, 4, step2, 3, 3, step3, 1, 1))
{
std::cerr << "error stopping workflow with three steps";
return EXIT_FAILURE;
}
// --------------------------------------------------------------------------
// workflow with a finish step (step 3)
// restart the workflow
if (!testStartWorkflow(workflow, defaultTime, app, 1, step1, step1, 5, 4, step2, 3, 3, step3, 1, 1))
{
std::cerr << "workflow with finish step is not running after start()";
return EXIT_FAILURE;
}
// try to go automatically to step 3
workflow->goToStep("Step 3");
if (!transitionTest(workflow, defaultTime, app, step1, step1, 6, 5, step2, 4, 4, step3, 2, 2))
{
std::cerr << "error after going to finish step";
return EXIT_FAILURE;
}
// try to go automatically to step 3 again
workflow->goToStep("Step 3");
if (!transitionTest(workflow, defaultTime, app, step1, step1, 7, 6, step2, 5, 5, step3, 3, 3))
{
std::cerr << "error after going to finish step the second time";
return EXIT_FAILURE;
}
// stop workflow
if (!testStopWorkflow(workflow, defaultTime, app, step1, 7, 7, step2, 5, 5, step3, 3, 3))
{
std::cerr << "error stopping workflow with finish step";
return EXIT_FAILURE;
}
// --------------------------------------------------------------------------
// workflow with two finishing steps (step3 and step4)
ctkExampleDerivedWorkflowStep *step4 = new ctkExampleDerivedWorkflowStep(workflow, "Step 4");
step4->setName("Step 4");
step4->setDescription("Description for step 4");
workflow->addTransition(step3, step4);
// restart the workflow
if (!testStartWorkflow(workflow, defaultTime, app, 1, step1, step1, 8, 7, step2, 5, 5, step3, 3, 3, step4, 0, 0))
{
std::cerr << "workflow with two finish steps is not running after start()";
return EXIT_FAILURE;
}
// try to go automatically to step 3
workflow->goToStep("Step 3");
if (!transitionTest(workflow, defaultTime, app, step1, step1, 9, 8, step2, 6, 6, step3, 4, 4, step4, 0, 0))
{
std::cerr << "error going to the first finish step of two";
return EXIT_FAILURE;
}
// try to go automatically to step 4
workflow->goToStep("Step 4");
if (!transitionTest(workflow, defaultTime, app, step1, step1, 10, 9, step2, 7, 7, step3, 5, 5, step4, 1, 1))
{
std::cerr << "error going to the second finish step of two";
return EXIT_FAILURE;
}
// go to step 3 (a finish step)
workflow->goForward();
QTimer::singleShot(defaultTime, &app, SLOT(quit()));
app.exec();
workflow->goForward();
if (!transitionTest(workflow, defaultTime, app, step3, step1, 10, 10, step2, 8, 8, step3, 6, 5, step4, 1, 1))
{
std::cerr << "error going from step1 to step3";
return EXIT_FAILURE;
}
// try to go automatically to step 4 (another goTo step)
workflow->goToStep("Step 4");
if (!transitionTest(workflow, defaultTime, app, step3, step1, 10, 10, step2, 8, 8, step3, 7, 6, step4, 2, 2))
{
std::cerr << "error going from the first finish step to the second finish step";
return EXIT_FAILURE;
}
// go to step 4, and then go forward (should not let you go past last step)
workflow->goForward();
QTimer::singleShot(defaultTime, &app, SLOT(quit()));
app.exec();
workflow->goForward();
if (!transitionTest(workflow, defaultTime, app, step4, step1, 10, 10, step2, 8, 8, step3, 7, 7, step4, 3, 2))
{
std::cerr << "error going forward past last step - shouldn't let you";
return EXIT_FAILURE;
}
// now try to go from step 4 to step 4 (should loop)
workflow->goToStep("Step 4");
if (!transitionTest(workflow, defaultTime, app, step4, step1, 10, 10, step2, 8, 8, step3, 7, 7, step4, 4, 3))
{
std::cerr << "error looping from step 4 to step 4";
return EXIT_FAILURE;
}
// go back to step 3, and then go from step 3 to step 3 (should loop without hitting step4)
workflow->goBackward();
QTimer::singleShot(defaultTime, &app, SLOT(quit()));
app.exec();
workflow->goToStep("Step 3");
if (!transitionTest(workflow, defaultTime, app, step3, step1, 10, 10, step2, 8, 8, step3, 9, 8, step4, 4, 4))
{
std::cerr << "error looping from step 3 to step 3";
return EXIT_FAILURE;
}
// handles deletions of the workflow, steps, states and transitions
delete workflow;
return EXIT_SUCCESS;
}
