Beispiel #1
0
/*
** Returns the position of the instruction "controlling" a given
** jump (that is, its condition), or the jump itself if it is
** unconditional.
*/
static Instruction *getjumpcontrol (FuncState *fs, int pc) {
  Instruction *pi = &fs->f->code[pc];
  if (pc >= 1 && testTMode(GET_OPCODE(*(pi-1))))
    return pi-1;
  else
    return pi;
}
Beispiel #2
0
/*static*/ Instruction *FuncState::getjumpcontrol (/*FuncState *fs,*/ int pc) {
	Instruction *pi = &f->code[pc];
	if (pc >= 1 && testTMode(GET_OPCODE(*(pi-1))))
		return pi-1;
	else
		return pi;
}
Beispiel #3
0
/* local op, a, b, c, test = jit.util.bytecode(func, pc) */
static int ju_bytecode(lua_State *L)
{
    Proto *pt = check_LCL(L)->l.p;
    int pc = luaL_checkint(L, 2);
    if (pc >= 1 && pc <= pt->sizecode) {
        Instruction ins = pt->code[pc-1];
        OpCode op = GET_OPCODE(ins);
        if (pc > 1 && (((int)OP_SETLIST) << POS_OP) ==
                (pt->code[pc-2] & (MASK1(SIZE_OP,POS_OP) | MASK1(SIZE_C,POS_C)))) {
            lua_pushstring(L, luaP_opnames[OP_SETLIST]);
            lua_pushnumber(L, (lua_Number)ins);  /* Fake extended op. */
            return 1;
        }
        if (op >= NUM_OPCODES) return 0;  /* Just in case. */
        lua_pushstring(L, luaP_opnames[op]);
        lua_pushinteger(L, GETARG_A(ins));
        switch (getOpMode(op)) {
        case iABC: {
            int b = GETARG_B(ins), c = GETARG_C(ins);
            switch (getBMode(op)) {
            case OpArgN:
                lua_pushnil(L);
                break;
            case OpArgK:
                if (ISK(b)) b = -1-INDEXK(b);
            case OpArgR:
            case OpArgU:
                lua_pushinteger(L, b);
                break;
            }
            switch (getCMode(op)) {
            case OpArgN:
                lua_pushnil(L);
                break;
            case OpArgK:
                if (ISK(c)) c = -1-INDEXK(c);
            case OpArgR:
            case OpArgU:
                lua_pushinteger(L, c);
                break;
            }
            lua_pushboolean(L, testTMode(op));
            return 5;
        }
        case iABx: {
            int bx = GETARG_Bx(ins);
            lua_pushinteger(L, getBMode(op) == OpArgK ? -1-bx : bx);
            return 3;
        }
        case iAsBx:
            lua_pushinteger(L, GETARG_sBx(ins));
            return 3;
        }
    }
    return 0;
}
Beispiel #4
0
static Instruction symbexec(const Proto* pt, int lastpc, int reg)
{
	int pc;
	int last;  /* stores position of last instruction that changed `reg' */
	last = pt->sizecode - 1; /* points to final return (a `neutral' instruction) */
	check(precheck(pt));
	for (pc = 0; pc < lastpc; pc++)
	{
		Instruction i = pt->code[pc];
		OpCode op = GET_OPCODE(i);
		int a = GETARG_A(i);
		int b = 0;
		int c = 0;
		check(op < NUM_OPCODES);
		checkreg(pt, a);
		switch (getOpMode(op))
		{
			case iABC:
			{
				b = GETARG_B(i);
				c = GETARG_C(i);
				check(checkArgMode(pt, b, getBMode(op)));
				check(checkArgMode(pt, c, getCMode(op)));
				break;
			}
			case iABx:
			{
				b = GETARG_Bx(i);
				if (getBMode(op) == OpArgK) check(b < pt->sizek);
				break;
			}
			case iAsBx:
			{
				b = GETARG_sBx(i);
				if (getBMode(op) == OpArgR)
				{
					int dest = pc + 1 + b;
					check(0 <= dest && dest < pt->sizecode);
					if (dest > 0)
					{
						int j;
						/* check that it does not jump to a setlist count; this
						   is tricky, because the count from a previous setlist may
						   have the same value of an invalid setlist; so, we must
						   go all the way back to the first of them (if any) */
						for (j = 0; j < dest; j++)
						{
							Instruction d = pt->code[dest - 1 - j];
							if (!(GET_OPCODE(d) == OP_SETLIST && GETARG_C(d) == 0)) break;
						}
						/* if 'j' is even, previous value is not a setlist (even if
						   it looks like one) */
						check((j & 1) == 0);
					}
				}
				break;
			}
		}
		if (testAMode(op))
		{
			if (a == reg) last = pc;	/* change register `a' */
		}
		if (testTMode(op))
		{
			check(pc + 2 < pt->sizecode); /* check skip */
			check(GET_OPCODE(pt->code[pc + 1]) == OP_JMP);
		}
		switch (op)
		{
			case OP_LOADBOOL:
			{
				if (c == 1)    /* does it jump? */
				{
					check(pc + 2 < pt->sizecode); /* check its jump */
					check(GET_OPCODE(pt->code[pc + 1]) != OP_SETLIST ||
					      GETARG_C(pt->code[pc + 1]) != 0);
				}
				break;
			}
			case OP_LOADNIL:
			{
				if (a <= reg && reg <= b)
					last = pc;  /* set registers from `a' to `b' */
				break;
			}
			case OP_GETUPVAL:
			case OP_SETUPVAL:
			{
				check(b < pt->nups);
				break;
			}
			case OP_GETGLOBAL:
			case OP_SETGLOBAL:
			{
				check(ttisstring(&pt->k[b]));
				break;
			}
			case OP_SELF:
			{
				checkreg(pt, a + 1);
				if (reg == a + 1) last = pc;
				break;
			}
			case OP_CONCAT:
			{
				check(b < c);  /* at least two operands */
				break;
			}
			case OP_TFORLOOP:
			{
				check(c >= 1);	/* at least one result (control variable) */
				checkreg(pt, a + 2 + c); /* space for results */
				if (reg >= a + 2) last = pc; /* affect all regs above its base */
				break;
			}
			case OP_FORLOOP:
			case OP_FORPREP:
				checkreg(pt, a + 3);
				/* go through */
			case OP_JMP:
			{
				int dest = pc + 1 + b;
				/* not full check and jump is forward and do not skip `lastpc'? */
				if (reg != NO_REG && pc < dest && dest <= lastpc)
					pc += b;  /* do the jump */
				break;
			}
			case OP_CALL:
			case OP_TAILCALL:
			{
				if (b != 0)
				{
					checkreg(pt, a + b - 1);
				}
				c--;  /* c = num. returns */
				if (c == LUA_MULTRET)
				{
					check(checkopenop(pt, pc));
				}
				else if (c != 0)
					checkreg(pt, a + c - 1);
				if (reg >= a) last = pc;  /* affect all registers above base */
				break;
			}
			case OP_RETURN:
			{
				b--;  /* b = num. returns */
				if (b > 0) checkreg(pt, a + b - 1);
				break;
			}
			case OP_SETLIST:
			{
				if (b > 0) checkreg(pt, a + b);
				if (c == 0)
				{
					pc++;
					check(pc < pt->sizecode - 1);
				}
				break;
			}
			case OP_CLOSURE:
			{
				int nup, j;
				check(b < pt->sizep);
				nup = pt->p[b]->nups;
				check(pc + nup < pt->sizecode);
				for (j = 1; j <= nup; j++)
				{
					OpCode op1 = GET_OPCODE(pt->code[pc + j]);
					check(op1 == OP_GETUPVAL || op1 == OP_MOVE);
				}
				if (reg != NO_REG)  /* tracing? */
					pc += nup;  /* do not 'execute' these pseudo-instructions */
				break;
			}
			case OP_VARARG:
			{
				check((pt->is_vararg & VARARG_ISVARARG) &&
				      !(pt->is_vararg & VARARG_NEEDSARG));
				b--;
				if (b == LUA_MULTRET) check(checkopenop(pt, pc));
				checkreg(pt, a + b - 1);
				break;
			}
			default:
				break;
		}
	}
	return pt->code[last];
}
Beispiel #5
0
static Instruction symbexec (const Proto *pt, int lastpc, int reg) {
  int pc;
  int last;  /* stores position of last instruction that changed `reg' */
  last = pt->sizecode-1;  /* points to final return (a `neutral' instruction) */
  check(precheck(pt));
  for (pc = 0; pc < lastpc; pc++) {
    Instruction i = pt->code[pc];
    OpCode op = GET_OPCODE(i);
    int a = GETARG_A(i);
    int b = 0;
    int c = 0;
    check(op < NUM_OPCODES);
    checkreg(pt, a);
    switch (getOpMode(op)) {
      case iABC: {
        b = GETARG_B(i);
        c = GETARG_C(i);
        check(checkArgMode(pt, b, getBMode(op)));
        check(checkArgMode(pt, c, getCMode(op)));
        break;
      }
      case iABx: {
        b = GETARG_Bx(i);
        if (getBMode(op) == OpArgK) check(b < pt->sizek);
        break;
      }
      case iAsBx: {
        b = GETARG_sBx(i);
        if (getBMode(op) == OpArgR) {
          int dest = pc+1+b;
          check(0 <= dest && dest < pt->sizecode);
          if (dest > 0) {
            /* cannot jump to a setlist count */
            Instruction d = pt->code[dest-1];
            check(!(GET_OPCODE(d) == OP_SETLIST && GETARG_C(d) == 0));
          }
        }
        break;
      }
    }
    if (testAMode(op)) {
      if (a == reg) last = pc;  /* change register `a' */
    }
    if (testTMode(op)) {
      check(pc+2 < pt->sizecode);  /* check skip */
      check(GET_OPCODE(pt->code[pc+1]) == OP_JMP);
    }
    switch (op) {
      case OP_LOADBOOL: {
        check(c == 0 || pc+2 < pt->sizecode);  /* check its jump */
        break;
      }
      case OP_LOADNIL: {
        if (a <= reg && reg <= b)
          last = pc;  /* set registers from `a' to `b' */
        break;
      }
      case OP_GETUPVAL:
      case OP_SETUPVAL: {
        check(b < pt->nups);
        break;
      }
      case OP_GETGLOBAL:
      case OP_SETGLOBAL: {
        check(ttisstring(&pt->k[b]));
        break;
      }
      case OP_SELF: {
        checkreg(pt, a+1);
        if (reg == a+1) last = pc;
        break;
      }
      case OP_CONCAT: {
        check(b < c);  /* at least two operands */
        break;
      }
      case OP_TFORLOOP: {
        check(c >= 1);  /* at least one result (control variable) */
        checkreg(pt, a+2+c);  /* space for results */
        if (reg >= a+2) last = pc;  /* affect all regs above its base */
        break;
      }
      case OP_FORLOOP:
      case OP_FORPREP:
        checkreg(pt, a+3);
        /* go through */
      case OP_JMP: {
        int dest = pc+1+b;
        /* not full check and jump is forward and do not skip `lastpc'? */
        if (reg != NO_REG && pc < dest && dest <= lastpc)
          pc += b;  /* do the jump */
        break;
      }
      case OP_CALL:
      case OP_TAILCALL: {
        if (b != 0) {
          checkreg(pt, a+b-1);
        }
        c--;  /* c = num. returns */
        if (c == LUA_MULTRET) {
          check(checkopenop(pt, pc));
        }
        else if (c != 0)
          checkreg(pt, a+c-1);
        if (reg >= a) last = pc;  /* affect all registers above base */
        break;
      }
      case OP_RETURN: {
        b--;  /* b = num. returns */
        if (b > 0) checkreg(pt, a+b-1);
        break;
      }
      case OP_SETLIST: {
        if (b > 0) checkreg(pt, a + b);
        if (c == 0) pc++;
        break;
      }
      case OP_CLOSURE: {
        int nup;
        check(b < pt->sizep);
        nup = pt->p[b]->nups;
        check(pc + nup < pt->sizecode);
        for (; nup>0; nup--) {
          OpCode op1 = GET_OPCODE(pt->code[pc+nup]);
          check(op1 == OP_GETUPVAL || op1 == OP_MOVE);
        }
        break;
      }
      case OP_VARARG: {
        check((pt->is_vararg & VARARG_ISVARARG) &&
             !(pt->is_vararg & VARARG_NEEDSARG));
        b--;
        if (b == LUA_MULTRET) check(checkopenop(pt, pc));
        checkreg(pt, a+b-1);
        break;
      }
      default: break;
    }
  }
  return pt->code[last];
}
Beispiel #6
0
static void invertjump (FuncState *fs, expdesc *e) {
  Instruction *pc = getjumpcontrol(fs, e->u.info);
  lua_assert(testTMode(GET_OPCODE(*pc)) && GET_OPCODE(*pc) != OP_TEST);
  SETARG_A(*pc, !(GETARG_A(*pc)));
}