VbError_t VbExTpmInit(void)
{
if (tis_init())
return TPM_E_IOERROR;
/* tpm_lite lib doesn't call VbExTpmOpen after VbExTpmInit. */
return VbExTpmOpen();
}
static int do_tpm_many(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[], int repeat_count)
{
int rv = 0;
if (argc < 7 && repeat_count == 0) {
puts("command should be at least six bytes in size\n");
return -1;
}
if (repeat_count > 0) {
rv = tpm_process_stress(repeat_count);
return rv;
}
if (tis_init()) {
puts("tis_init() failed!\n");
return -1;
}
if (tis_open()) {
puts("tis_open() failed!\n");
return -1;
}
rv = tpm_process(argc - 1, argv + 1, cmdtp);
if (tis_close()) {
puts("tis_close() failed!\n");
rv = -1;
}
return rv;
}
uint32_t tlcl_lib_init(void) {
if (tis_init())
return VB2_ERROR_UNKNOWN;
if (tis_open())
return VB2_ERROR_UNKNOWN;
return VB2_SUCCESS;
}
static void init_vboot(int bootmode)
{
u32 result;
u8 response[TPM_LARGE_ENOUGH_COMMAND_SIZE];
#ifdef UBOOT_DOES_TPM_STARTUP
/* Doing TPM startup when we're not coming in on the S3 resume path
* saves us roughly 20ms in boot time only. This does not seem to
* be worth an API change to vboot_reference-firmware right now, so
* let's keep the code around, but just bail out early:
*/
if (bootmode != 2)
return;
#endif
printk(BIOS_DEBUG, "Verified boot TPM initialization.\n");
printk(BIOS_SPEW, "TPM: Init\n");
if (tis_init())
return;
printk(BIOS_SPEW, "TPM: Open\n");
if (tis_open())
return;
if (bootmode == 2) {
/* S3 Resume */
printk(BIOS_SPEW, "TPM: Resume\n");
result = TlclSendReceive(tpm_resume_cmd.buffer,
response, sizeof(response));
if (result == TPM_E_INVALID_POSTINIT) {
/* We're on a platform where the TPM maintains power
* in S3, so it's already initialized.
*/
printk(BIOS_DEBUG, "TPM: Already initialized.\n");
return;
}
} else {
printk(BIOS_SPEW, "TPM: Startup\n");
result = TlclSendReceive(tpm_startup_cmd.buffer,
response, sizeof(response));
}
if (result == TPM_SUCCESS) {
printk(BIOS_SPEW, "TPM: OK.\n");
return;
}
#if !MOCK_TPM
printk(BIOS_ERR, "TPM: Error code 0x%x. Hard reset!\n", result);
hard_reset();
#endif
}
uint32_t tlcl_lib_init(void)
{
/*
* This function is called directly by vboot, uses vboot return
* types.
*/
if (tis_init())
return VB2_ERROR_UNKNOWN;
if (tis_open())
return VB2_ERROR_UNKNOWN;
return VB2_SUCCESS;
}
static int tpm_process_stress(int repeat_count)
{
int i;
int rv = 0;
u8 request[] = {0x0, 0xc1,
0x0, 0x0, 0x0, 0x16,
0x0, 0x0, 0x0, 0x65,
0x0, 0x0, 0x0, 0x4,
0x0, 0x0, 0x0, 0x4,
0x0, 0x0, 0x1, 0x9};
u8 response[MAX_TRANSACTION_SIZE];
u32 rlength = MAX_TRANSACTION_SIZE;
CHECK(tis_init());
for (i = 0; i < repeat_count; i++) {
CHECK(tis_open());
rv = tis_sendrecv(request, sizeof(request), response, &rlength);
if (rv) {
printf("tpm test failed at step %d with 0x%x\n", i, rv);
CHECK(tis_close());
break;
}
CHECK(tis_close());
if ((response[6] || response[7] || response[8] || response[9])
&& response[9] != 0x26) {
/* Ignore postinit errors */
printf("tpm command failed at step %d\n"
"tpm error code: %02x%02x%02x%02x\n", i,
response[6], response[7],
response[8], response[9]);
rv = -1;
break;
}
}
return rv;
}
void init_tpm(int s3resume)
{
u32 result;
u8 response[TPM_LARGE_ENOUGH_COMMAND_SIZE];
if (CONFIG_TPM_DEACTIVATE) {
printk(BIOS_SPEW, "TPM: Deactivate\n");
result = TlclSendReceive(tpm_deactivate_cmd.buffer,
response, sizeof(response));
if (result == TPM_SUCCESS) {
printk(BIOS_SPEW, "TPM: OK.\n");
return;
}
printk(BIOS_ERR, "TPM: Error code 0x%x.\n", result);
return;
}
/* Doing TPM startup when we're not coming in on the S3 resume path
* saves us roughly 20ms in boot time only. This does not seem to
* be worth an API change to vboot_reference-firmware right now, so
* let's keep the code around, but just bail out early:
*/
if (s3resume ? CONFIG_NO_TPM_RESUME
: CONFIG_SKIP_TPM_STARTUP_ON_NORMAL_BOOT)
return;
printk(BIOS_DEBUG, "TPM initialization.\n");
printk(BIOS_SPEW, "TPM: Init\n");
if (tis_init())
return;
printk(BIOS_SPEW, "TPM: Open\n");
if (tis_open())
return;
if (s3resume) {
/* S3 Resume */
printk(BIOS_SPEW, "TPM: Resume\n");
result = TlclSendReceive(tpm_resume_cmd.buffer,
response, sizeof(response));
if (result == TPM_E_INVALID_POSTINIT) {
/* We're on a platform where the TPM maintains power
* in S3, so it's already initialized.
*/
printk(BIOS_DEBUG, "TPM: Already initialized.\n");
return;
}
} else {
printk(BIOS_SPEW, "TPM: Startup\n");
result = TlclSendReceive(tpm_startup_cmd.buffer,
response, sizeof(response));
}
if (result == TPM_SUCCESS) {
printk(BIOS_SPEW, "TPM: OK.\n");
return;
}
printk(BIOS_ERR, "TPM: Error code 0x%x.\n", result);
if (CONFIG_TPM_INIT_FAILURE_IS_FATAL) {
printk(BIOS_ERR, "Hard reset!\n");
post_code(POST_TPM_FAILURE);
if (IS_ENABLED(CONFIG_CONSOLE_CBMEM_DUMP_TO_UART))
cbmem_dump_console();
hard_reset();
}
}
