Beispiel #1
0
static int _od_suspend_noirq(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct omap_device *od = to_omap_device(pdev);
	int ret;

	/* Don't attempt late suspend on a driver that is not bound */
	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER)
		return 0;

	ret = pm_generic_suspend_noirq(dev);

	if (!ret && !pm_runtime_status_suspended(dev)) {
		if (pm_generic_runtime_suspend(dev) == 0) {
			pm_runtime_set_suspended(dev);
			omap_device_idle(pdev);
			od->flags |= OMAP_DEVICE_SUSPENDED;
		}
	}

	return ret;
}
Beispiel #2
0
/**
 * omap_device_late_idle - idle devices without drivers
 * @dev: struct device * associated with omap_device
 * @data: unused
 *
 * Check the driver bound status of this device, and idle it
 * if there is no driver attached.
 */
static int __init omap_device_late_idle(struct device *dev, void *data)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct omap_device *od = to_omap_device(pdev);

	if (!od)
		return 0;

	/*
	 * If omap_device state is enabled, but has no driver bound,
	 * idle it.
	 */
	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
				 __func__);
			omap_device_idle(pdev);
		}
	}

	return 0;
}
Beispiel #3
0
static int _od_resume_noirq(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct omap_device *od = to_omap_device(pdev);

	if (od->flags & OMAP_DEVICE_SUSPENDED) {
		od->flags &= ~OMAP_DEVICE_SUSPENDED;
		omap_device_enable(pdev);
		/*
		 * XXX: we run before core runtime pm has resumed itself. At
		 * this point in time, we just restore the runtime pm state and
		 * considering symmetric operations in resume, we donot expect
		 * to fail. If we failed, something changed in core runtime_pm
		 * framework OR some device driver messed things up, hence, WARN
		 */
		WARN(pm_runtime_set_active(dev),
		     "Could not set %s runtime state active\n", dev_name(dev));
		pm_generic_runtime_resume(dev);
	}

	return pm_generic_resume_noirq(dev);
}
/**
 * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
 * @od: struct omap_device *
 *
 * When a device's maximum wakeup latency limit changes, call some of
 * the .activate_func or .deactivate_func function pointers in the
 * omap_device's pm_lats array to ensure that the device's maximum
 * wakeup latency is less than or equal to the new latency limit.
 * Intended to be called by OMAP PM code whenever a device's maximum
 * wakeup latency limit changes (e.g., via
 * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
 * done (e.g., if the omap_device is not currently idle, or if the
 * wakeup latency is already current with the new limit) or passes
 * along the return value of _omap_device_deactivate() or
 * _omap_device_activate().
 */
int omap_device_align_pm_lat(struct platform_device *pdev,
			     u32 new_wakeup_lat_limit)
{
	int ret = -EINVAL;
	struct omap_device *od;

	od = to_omap_device(pdev);

	if (new_wakeup_lat_limit == od->dev_wakeup_lat)
		return 0;

	od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;

	if (od->_state != OMAP_DEVICE_STATE_IDLE)
		return 0;
	else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
		ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
	else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
		ret = _omap_device_activate(od, USE_WAKEUP_LAT);

	return ret;
}
Beispiel #5
0
/* TBD: Will be removed once we have irq-chaing mechanism */
static bool omap_uart_chk_wakeup(struct platform_device *pdev)
{
	struct omap_uart_port_info *up = pdev->dev.platform_data;
	struct omap_device *od;
	u32 wkst = 0;
	bool ret = false;

	od = to_omap_device(pdev);
	if (omap_hwmod_pad_get_wakeup_status(od->hwmods[0]) == true)
		ret = true;

	if (up->wk_st && up->wk_en && up->wk_mask) {
		/* Check for normal UART wakeup (and clear it) */
		wkst = __raw_readl(up->wk_st) & up->wk_mask;
		if (wkst) {
			__raw_writel(wkst, up->wk_st);
			ret = true;
		}
	}

	return ret;
}
static int _omap_mstandby_pm_notifier(struct notifier_block *self,
					unsigned long action, void *dev)
{
	struct omap_hwmod_list *oh_list_item = NULL;
	struct platform_device *pdev;
	struct omap_device *od;

	switch (action) {
	case PM_POST_SUSPEND:
		list_for_each_entry(oh_list_item,
			omap_hwmod_force_mstandby_list_get(), oh_list) {
			pdev = to_platform_device(
					omap_device_get_by_hwmod_name(
						  oh_list_item->oh->name));

			od = to_omap_device(pdev);
			if (od && od->_driver_status !=
					BUS_NOTIFY_BOUND_DRIVER) {
				omap_hwmod_enable(oh_list_item->oh);
				omap_hwmod_idle(oh_list_item->oh);
			}
		}
	}
static int _omap_device_notifier_call(struct notifier_block *nb,
				      unsigned long event, void *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct omap_device *od;

	switch (event) {
	case BUS_NOTIFY_DEL_DEVICE:
		if (pdev->archdata.od)
			omap_device_delete(pdev->archdata.od);
		break;
	case BUS_NOTIFY_ADD_DEVICE:
		if (pdev->dev.of_node)
			omap_device_build_from_dt(pdev);
		/* fall through */
	default:
		od = to_omap_device(pdev);
		if (od)
			od->_driver_status = event;
	}

	return NOTIFY_DONE;
}
Beispiel #8
0
/**
 * omap_device_shutdown - shut down an omap_device
 * @od: struct omap_device * to shut down
 *
 * Shut down omap_device @od by calling all .deactivate_func() entries
 * in the omap_device's pm_lats table and then shutting down all of
 * the underlying omap_hwmods.  Used when a device is being "removed"
 * or a device driver is being unloaded.  Returns -EINVAL if the
 * omap_device is not currently enabled or idle, or passes along the
 * return value of _omap_device_deactivate().
 */
int omap_device_shutdown(struct platform_device *pdev)
{
	int ret, i;
	struct omap_device *od;

	od = to_omap_device(pdev);

	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
	    od->_state != OMAP_DEVICE_STATE_IDLE) {
		WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
		     od->pdev.name, od->pdev.id, __func__, od->_state);
		return -EINVAL;
	}

	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);

	for (i = 0; i < od->hwmods_cnt; i++)
		omap_hwmod_shutdown(od->hwmods[i]);

	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;

	return ret;
}
static int serial_omap_probe(struct platform_device *pdev)
{
	struct uart_omap_port	*up = NULL;
	struct resource		*mem, *irq, *dma_tx, *dma_rx;
	struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
	struct omap_device *od;
	int ret = -ENOSPC;

	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!mem) {
		dev_err(&pdev->dev, "no mem resource?\n");
		return -ENODEV;
	}

	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
	if (!irq) {
		dev_err(&pdev->dev, "no irq resource?\n");
		return -ENODEV;
	}

	if (!request_mem_region(mem->start, (mem->end - mem->start) + 1,
				     pdev->dev.driver->name)) {
		dev_err(&pdev->dev, "memory region already claimed\n");
		return -EBUSY;
	}

	dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
	if (!dma_rx) {
		ret = -EINVAL;
		goto err;
	}

	dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
	if (!dma_tx) {
		ret = -EINVAL;
		goto err;
	}

	up = kzalloc(sizeof(*up), GFP_KERNEL);
	if (up == NULL) {
		ret = -ENOMEM;
		goto do_release_region;
	}
	sprintf(up->name, "OMAP UART%d", pdev->id);
	up->pdev = pdev;
	up->port.dev = &pdev->dev;
	up->port.type = PORT_OMAP;
	up->port.iotype = UPIO_MEM;
	up->port.irq = irq->start;

	up->port.regshift = 2;
	up->port.fifosize = 64;
	up->port.ops = &serial_omap_pops;
	up->port.line = pdev->id;

	up->port.mapbase = mem->start;
	up->port.membase = ioremap(mem->start, mem->end - mem->start);

	if (!up->port.membase) {
		dev_err(&pdev->dev, "can't ioremap UART\n");
		ret = -ENOMEM;
		goto err1;
	}

	up->port.flags = omap_up_info->flags;
	up->port.uartclk = omap_up_info->uartclk;
	up->uart_dma.uart_base = mem->start;
	up->errata = omap_up_info->errata;
	up->enable_wakeup = omap_up_info->enable_wakeup;
	up->wer = omap_up_info->wer;
	up->chk_wakeup = omap_up_info->chk_wakeup;
	up->wake_peer = omap_up_info->wake_peer;
	up->rts_mux_driver_control = omap_up_info->rts_mux_driver_control;
	up->rts_pullup_in_suspend = 0;
	up->wer_restore = 0;

	if (omap_up_info->use_dma) {
		up->uart_dma.uart_dma_tx = dma_tx->start;
		up->uart_dma.uart_dma_rx = dma_rx->start;
		up->use_dma = 1;
		up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size;
		up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout;
		up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate;
		spin_lock_init(&(up->uart_dma.tx_lock));
		spin_lock_init(&(up->uart_dma.rx_lock));
		up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
		up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
	}

	pm_runtime_use_autosuspend(&pdev->dev);
	pm_runtime_set_autosuspend_delay(&pdev->dev,
			omap_up_info->auto_sus_timeout);

	if (device_may_wakeup(&pdev->dev))
		pm_runtime_enable(&pdev->dev);

	pm_runtime_irq_safe(&pdev->dev);
	if (omap_up_info->console_uart) {
		od = to_omap_device(up->pdev);
		omap_hwmod_idle(od->hwmods[0]);
		serial_omap_port_enable(up);
		serial_omap_port_disable(up);
	}

	ui[pdev->id] = up;
	serial_omap_add_console_port(up);

	ret = uart_add_one_port(&serial_omap_reg, &up->port);
	if (ret != 0)
		goto err1;

	dev_set_drvdata(&pdev->dev, up);
	platform_set_drvdata(pdev, up);

	return 0;
err:
	dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
				pdev->id, __func__, ret);
err1:
	kfree(up);
do_release_region:
	release_mem_region(mem->start, (mem->end - mem->start) + 1);
	return ret;
}
Beispiel #10
0
static struct omap_hwmod_mux_info * __init
omap_hwmod_mux_array_init(struct platform_device	*pdev,
			  const struct omap_device_pad *bpads[],
			  int *nr_pads,
			  const enum usbhs_omap_port_mode *port_mode)
{
	struct omap_device_pad		*pads;
	struct omap_hwmod_mux_info	*hmux;
	struct omap_device		*od;
	struct omap_hwmod		*uhh_hwm;
	size_t				npads;
	u32				i, k, j;

	for (i = 0, npads = 0; i < OMAP3_HS_USB_PORTS; i++)
		npads += nr_pads[i];

	pads = kmalloc(sizeof(struct omap_device_pad)*npads, GFP_KERNEL);

	if (!pads) {
		pr_err("%s: Could not allocate device mux entry\n", __func__);
		return NULL;
	}

	for (i = 0, k = 0; i < OMAP3_HS_USB_PORTS; i++)
		if (nr_pads[i]) {
			memcpy(pads + k, bpads[i],
				sizeof(struct omap_device_pad) * nr_pads[i]);
			k +=  nr_pads[i];
		}
	hmux = omap_hwmod_mux_init(pads, npads);

	if (!pdev)
		goto end;

	od = to_omap_device(pdev);
	uhh_hwm = od->hwmods[0];
	if (!uhh_hwm)
		goto end;

	uhh_hwm->mux = hmux;
	for (i = 0, k = 0; i < OMAP3_HS_USB_PORTS; i++) {
		switch (port_mode[i]) {
		case OMAP_EHCI_PORT_MODE_PHY:
		case OMAP_EHCI_PORT_MODE_TLL:
		case OMAP_EHCI_PORT_MODE_HSIC:
			for (j = 0; j < nr_pads[i]; j++)
				omap_hwmod_pad_wakeup_handler(uhh_hwm, k + j,
							usbhs_wakeup_handler);
			break;
		case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
		case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
		case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
		case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
		case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
		case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
		case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
		case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
		case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
		case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
			for (j = 0; j < nr_pads[i]; j++)
				omap_hwmod_pad_wakeup_handler(uhh_hwm, k + j,
							usbhs_wakeup_handler);
			break;

		case OMAP_USBHS_PORT_MODE_UNUSED:
		default:
			break;
		}
		k += nr_pads[i];
	}

end:
	kfree(pads);
	return hmux;
}