void
_change_color(short newcolor, int (*outc)(char))
{
#ifndef PC6300PLUS
{
_Color_pair *ptp = cur_term->_pairs_tbl;
/* pairs table pointer */
_Color_pair *cur_pair = &cur_term->_cur_pair;
/* MORE: we may have to change some stuff, depending on whether */
/* HP terminals will be changing the background, or not */
if (newcolor == 0) {
if (orig_pair)
(void) tputs(tparm_p0(orig_pair), 1, outc);
if (set_a_background || set_a_foreground ||
set_background || set_foreground) {
cur_pair->background = -1;
cur_pair->foreground = -1;
}
return;
}
/* if we are on HP type terminal, just send an escape sequence */
/* to use desired color pair (we could have done some optimization: */
/* check if both the foreground and background of newcolor match */
/* the ones of cur_term->_cur_pair. but that will happen only when */
/* two color pairs are defined exacly the same, and probably not */
/* worth the effort). */
if (set_color_pair)
(void) tputs(tparm_p1(set_color_pair, newcolor), 1, outc);
/* on Tek model we can do some optimization. */
else {
if (ptp[newcolor].background != cur_pair->background) {
if (set_a_background)
(void) tputs(tparm_p1(set_a_background,
ptp[newcolor].background), 1, outc);
else if (set_background)
(void) tputs(tparm_p1(set_background,
Oldcolors[ptp[newcolor].background]),
1, outc);
cur_pair->background = ptp[newcolor].background;
}
if (ptp[newcolor].foreground != cur_pair->foreground) {
if (set_a_foreground)
(void) tputs(tparm_p1(set_a_foreground,
ptp[newcolor].foreground), 1, outc);
else if (set_foreground)
(void) tputs(tparm_p1(set_foreground,
Oldcolors[ptp[newcolor].foreground]),
1, outc);
cur_pair->foreground = ptp[newcolor].foreground;
}
}
}
#else
{
/* the following code is for PC6300 PLUS: it uses BOLD terminfo */
/* entry for turning on colors, and SGR0 for turning them off. */
/* Every time a new color-pair is used, we are forced to do an */
/* ioctl read, and the send 'enter_bold_mode' escape sequence. */
/* This could be improved by using */
/* DIM, UNDERLINE, and REVERSE in addition to BOLD */
struct console con;
_Color_pair *ptp = cur_term->_pairs_tbl;
/* pairs table pointer */
back = ptp[newcolor].background;
fore = ptp[newcolor].foreground;
(void) fflush(SP->term_file);
ioctl(cur_term->Filedes, CONIOGETDATA, &con);
#define BOLD 4
con.l[con.page].colors[BOLD] =
((back + back + (fore > 5)) * 8 + fore) & 0177;
ioctl(cur_term->Filedes, CONIOSETDATA, &con);
(void) tputs(enter_bold_mode, 1, outc);
}
#endif
}
int
wrefresh(WINDOW *win)
{
short *bnsch, *ensch;
SLK_MAP *slk;
int wx, wy, nc, boty, clby, idby, *hs, curwin;
curwin = (win == curscr);
/* don't allow curscr refresh if the screen was just created */
if (curwin && curscr->_sync)
return (OK);
/* go thru _stdbody */
if (!curwin && (win != _virtscr))
(void) wnoutrefresh(win);
/* if there is typeahead */
if ((_INPUTPENDING = _chkinput()) == TRUE) {
if (curwin)
curscr->_clear = TRUE;
return (OK);
}
if (curwin || curscr->_clear)
_virtscr->_clear = TRUE;
/* save curscr cursor coordinates */
cy = curscr->_cury;
cx = curscr->_curx;
/* to simplify code in some cases */
marks = _MARKS;
color_marks = _COLOR_MARKS;
scrli = curscr->_maxy;
scrco = curscr->_maxx;
slk = SP->slk;
outchcount = 0;
/* make sure we're in program mode */
if (SP->fl_endwin) {
/* If endwin is equal to 2 it means we just did a newscreen. */
if (SP->fl_endwin == TRUE) {
(void) reset_prog_mode();
if (SP->kp_state)
(void) tputs(keypad_xmit, 1, _outch);
if (slk)
(*_do_slk_tch)();
if (SP->fl_meta)
(void) tputs(meta_on, 1, _outch);
if (cur_term->_cursorstate != 1)
_PUTS(cur_term->cursor_seq[cur_term->
_cursorstate], 0);
}
_PUTS(enter_ca_mode, 1);
(void) tputs(ena_acs, 1, _outch);
if (exit_attribute_mode)
_PUTS(tparm_p0(exit_attribute_mode), 1);
else
/*
* If there is no exit_attribute mode, then vidupdate
* could only possibly turn off one of the below three
* so that's all we ask it turn off.
*/
vidupdate(A_NORMAL, (A_ALTCHARSET | A_STANDOUT |
A_UNDERLINE), _outch);
SP->fl_endwin = FALSE;
#ifdef _VR2_COMPAT_CODE
_endwin = (char) FALSE;
#endif /* _VR2_COMPAT_CODE */
}
/* clear the screen if required */
if (_virtscr->_clear) {
/* SS: colors */
if (back_color_erase)
_turn_off_background();
_PUTS(clear_screen, scrli);
cy = cx = curscr->_curx = curscr->_cury = 0;
/* _sync indicates that this a new screen */
if (!curscr->_sync)
(void) werase(curscr);
else {
nc = scrco / BITSPERBYTE - (scrco %
BITSPERBYTE ? 0 : 1);
wy = scrli - 1;
bnsch = _BEGNS; ensch = _ENDNS;
hs = _CURHASH;
for (; wy >= 0; --wy) {
*bnsch++ = scrco;
*ensch++ = -1;
*hs++ = 0;
if (marks)
for (wx = nc; wx >= 0; --wx)
marks[wy][wx] = 0;
}
}
_virtscr->_clear = curscr->_sync = curscr->_clear = FALSE;
if (slk)
(*_do_slk_tch)();
/* pretend _virtscr has been totally changed */
(void) wtouchln(_virtscr, 0, scrli, -1);
_VIRTTOP = 0;
_VIRTBOT = scrli - 1;
/* will not do clear-eod or ins/del lines */
clby = idby = scrli;
} else
clby = idby = -1;
/* Software soft labels; if _changed == 2, slk's are in clear mode. */
if (slk && slk->_win && (slk->_changed == TRUE))
(*_do_slk_noref)();
/* do line updating */
_virtscr->_clear = FALSE;
wy = _VIRTTOP;
boty = _VIRTBOT + 1;
bnsch = _virtscr->_firstch + wy;
ensch = _virtscr->_lastch + wy;
for (; wy < boty; ++wy, ++bnsch, ++ensch) {
/* this line is up-to-date */
if (*bnsch >= scrco)
goto next;
/* there is type-ahead */
if (!curwin && (_INPUTPENDING = _chkinput()) == TRUE) {
/* LINTED */
_VIRTTOP = (short) wy;
goto done;
}
if (clby < 0) {
/* now we have to work, check for ceod */
clby = _getceod(wy, boty);
/* check for insert/delete lines */
if (_virtscr->_use_idl)
idby = (*_setidln)();
}
/* try clear-to-eod */
if (wy == clby)
_useceod(wy, boty);
/* try ins/del lines */
if (wy == idby) {
curscr->_cury = cy;
curscr->_curx = cx;
(*_useidln)();
cy = curscr->_cury;
cx = curscr->_curx;
}
if (*bnsch < scrco)
_updateln(wy);
next:
*bnsch = _INFINITY;
*ensch = -1;
}
/* do hardware soft labels; if _changed == 2, */
/* slk's are in clear mode. */
if (slk && (slk->_changed == TRUE) && !(slk->_win))
(*_do_slk_ref)();
/* move cursor */
wy = _virtscr->_cury;
wx = _virtscr->_curx;
if (wy != cy || wx != cx) {
(void) mvcur(cy, cx, wy, wx);
/* LINTED */
cy = (short) wy;
/* LINTED */
cx = (short) wx;
}
/* reset the flags */
curscr->_clear = FALSE;
_virtscr->_use_idl = FALSE;
_virtscr->_use_idc = TRUE;
_INPUTPENDING = FALSE;
/* virtual image is now up-to-date */
_VIRTTOP = scrli;
_VIRTBOT = -1;
done :
curscr->_cury = cy;
curscr->_curx = cx;
(void) fflush(SP->term_file);
return (outchcount);
}
int
_change_video(chtype newmode, chtype oldmode, int (*outc)(char))
{
int rc = 0;
/* If you have set_attributes let the terminfo writer */
/* worry about it. */
if (!set_attributes) {
/*
* The trick is that we want to pre-process the new and oldmode
* so that we now know what they will really translate to on
* the physical screen.
* In the case where some attributes are being faked
* we get rid of the attributes being asked for and just have
* STANDOUT mode set. Therefore, if STANDOUT and UNDERLINE were
* on the screen but UNDERLINE was being faked to STANDOUT; and
* the new mode is just UNDERLINE, we will get rid of any faked
* modes and be left with and oldmode of STANDOUT and a new mode
* of STANDOUT, in which case the check for newmode and oldmode
* being equal will be true.
*
*
* This test is similar to the concept explained above.
* counter is the maximum attributes allowed on a terminal.
* For instance, on an hp/tvi950 without set_attributes
* the last video sequence sent will be the one the terminal
* will be in (on that spot). Therefore, in setupterm.c
* if ceol_standout_glitch or magic_cookie_glitch is set
* max_attributes is set to 1. This is because on those terminals
* only one attribute can be on at once. So, we pre-process the
* oldmode and the newmode and only leave the bits that are
* significant. In other words, if on an hp you ask for STANDOUT
* and UNDERLINE it will become only STANDOUT since that is the
* first bit that is looked at. If then the user goes from
* STANDOUT and UNDERLINE to STANDOUT and REVERSE the oldmode will
* become STANDOUT and the newmode will become STANDOUT.
*
* This also helps the code below in that on a hp or tvi950 only
* one bit will ever be set so that no code has to be added to
* cut out early in case two attributes were asked for.
*/
chtype check_faked, modes[2];
int counter = max_attributes, i, j, tempmode;
int k = (cur_term->sgr_mode == oldmode) ? 1 : 2;
modes[0] = newmode;
modes[1] = oldmode;
while (k-- > 0) {
if ((check_faked = (modes[k] &
cur_term->sgr_faked)) != A_NORMAL) {
modes[k] &= ~check_faked;
modes[k] |= A_STANDOUT;
}
if ((j = counter) >= 0) {
tempmode = A_NORMAL;
if (j > 0) {
for (i = 0; i < NUM_ATTRIBUTES; i++) {
if (modes[k] &
bit_attributes[i]) {
tempmode |=
bit_attributes[i];
if (--j == 0)
break;
}
}
}
modes[k] = tempmode;
}
}
newmode = modes[0];
oldmode = modes[1];
}
if (newmode == oldmode)
return (rc);
#ifdef DEBUG
if (outf)
fprintf(outf, "vidupdate oldmode=%o, newmode=%o\n",
oldmode, newmode);
#endif
if (set_attributes) {
(void) tputs(tparm(set_attributes,
newmode & A_STANDOUT,
newmode & A_UNDERLINE,
newmode & A_REVERSE,
newmode & A_BLINK,
newmode & A_DIM,
newmode & A_BOLD,
newmode & A_INVIS,
newmode & A_PROTECT,
newmode & A_ALTCHARSET),
1, outc);
rc = -1;
} else {
chtype turn_on, turn_off;
int i;
/*
* If we are going to turn something on anyway and we are
* on a glitchy terminal, don't bother turning it off
* since by turning something on you turn everything else off.
*/
if ((ceol_standout_glitch || magic_cookie_glitch >= 0) &&
((turn_on = ((oldmode ^ newmode) & newmode)) !=
A_NORMAL)) {
goto turn_on_code;
}
if ((turn_off = (oldmode & newmode) ^ oldmode) != A_NORMAL) {
/*
* Check for things to turn off.
* First see if we are going to turn off something
* that doesn't have a specific turn off capability.
*
* Then check to see if, even though there may be a specific
* turn off sequence, this terminal doesn't have one or
* the turn off sequence also turns off something else.
*/
if ((turn_off & ~(A_ALTCHARSET | A_STANDOUT | A_UNDERLINE)) ||
(turn_off != (turn_off & cur_term->check_turn_off))) {
(void) tputs(tparm_p0(exit_attribute_mode), 1, outc);
rc = -1;
oldmode = A_NORMAL;
} else {
for (i = 0; i < NUM_OF_SPECIFIC_TURN_OFFS; i++) {
if (turn_off & bit_attributes[i]) {
(void) tputs(tparm_p0
(cur_term->turn_off_seq[i]),
1, outc);
oldmode &= ~bit_attributes[i];
rc = -1;
}
}
}
}
if ((turn_on = ((oldmode ^ newmode) & newmode)) != A_NORMAL) {
turn_on_code:
/* Check for modes to turn on. */
for (i = 0; i < NUM_ATTRIBUTES; i++)
if (turn_on & bit_attributes[i]) {
(void) tputs(tparm_p0(cur_term->turn_on_seq[i]),
1, outc);
rc = -1;
/*
* Keep turning off the bit(s) that we just
* sent to the screen. As soon as turn_on
* reaches A_NORMAL we don't have to turn
* anything else on and we can
* break out of the loop.
*/
if ((turn_on &= ~bit_attributes[i]) ==
A_NORMAL)
break;
}
}
if (magic_cookie_glitch > 0)
(void) tputs(cursor_left, 1, outc);
}
cur_term->sgr_mode = newmode;
return (rc);
}
