static int
ucom_attach_tty(struct ucom_super_softc *ssc, struct ucom_softc *sc)
{
struct tty *tp;
char buf[32]; /* temporary TTY device name buffer */
tp = tty_alloc_mutex(&ucom_class, sc, sc->sc_mtx);
if (tp == NULL)
return (ENOMEM);
/* Check if the client has a custom TTY name */
buf[0] = '\0';
if (sc->sc_callback->ucom_tty_name) {
sc->sc_callback->ucom_tty_name(sc, buf,
sizeof(buf), ssc->sc_unit, sc->sc_subunit);
}
if (buf[0] == 0) {
/* Use default TTY name */
if (ssc->sc_subunits > 1) {
/* multiple modems in one */
snprintf(buf, sizeof(buf), UCOM_TTY_PREFIX "%u.%u",
ssc->sc_unit, sc->sc_subunit);
} else {
/* single modem */
snprintf(buf, sizeof(buf), UCOM_TTY_PREFIX "%u",
ssc->sc_unit);
}
}
tty_makedev(tp, NULL, "%s", buf);
sc->sc_tty = tp;
DPRINTF("ttycreate: %s\n", buf);
/* Check if this device should be a console */
if ((ucom_cons_softc == NULL) &&
(ssc->sc_unit == ucom_cons_unit) &&
(sc->sc_subunit == ucom_cons_subunit)) {
DPRINTF("unit %d subunit %d is console",
ssc->sc_unit, sc->sc_subunit);
ucom_cons_softc = sc;
tty_init_console(tp, ucom_cons_baud);
UCOM_MTX_LOCK(ucom_cons_softc);
ucom_cons_rx_low = 0;
ucom_cons_rx_high = 0;
ucom_cons_tx_low = 0;
ucom_cons_tx_high = 0;
sc->sc_flag |= UCOM_FLAG_CONSOLE;
ucom_open(ucom_cons_softc->sc_tty);
ucom_param(ucom_cons_softc->sc_tty, &tp->t_termios_init_in);
UCOM_MTX_UNLOCK(ucom_cons_softc);
}
return (0);
}
static int
dcons_attach_port(int port, char *name, int flags)
{
struct dcons_softc *dc;
struct tty *tp;
dc = &sc[port];
tp = tty_alloc(&dcons_ttydevsw, dc);
dc->flags = flags;
dc->tty = tp;
tty_init_console(tp, 0);
tty_makedev(tp, NULL, "%s", name);
return(0);
}
static void
cn_drvinit(void *unused)
{
if (mambo_consdev.cn_pri != CN_DEAD &&
mambo_consdev.cn_name[0] != '\0') {
if (OF_finddevice("/mambo") == -1)
return;
tp = tty_alloc(&mambo_ttydevsw, NULL);
tty_init_console(tp, 0);
tty_makedev(tp, NULL, "%s", "mambocons");
polltime = 1;
callout_init(&mambo_callout, CALLOUT_MPSAFE);
callout_reset(&mambo_callout, polltime, mambo_timeout, NULL);
}
}
static int
uart_phyp_attach(device_t dev)
{
struct uart_phyp_softc *sc;
int unit;
sc = device_get_softc(dev);
sc->dev = dev;
sc->node = ofw_bus_get_node(dev);
uart_phyp_probe_node(sc);
unit = device_get_unit(dev);
sc->tp = tty_alloc(&uart_phyp_tty_class, sc);
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL,
MTX_SPIN | MTX_QUIET | MTX_NOWITNESS);
if (console_sc != NULL && console_sc->vtermid == sc->vtermid) {
sc->outseqno = console_sc->outseqno;
console_sc = sc;
sprintf(uart_phyp_consdev.cn_name, "ttyu%r", unit);
tty_init_console(sc->tp, 0);
}
sc->irqrid = 0;
sc->irqres = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irqrid,
RF_ACTIVE | RF_SHAREABLE);
if (sc->irqres != NULL) {
bus_setup_intr(dev, sc->irqres, INTR_TYPE_TTY | INTR_MPSAFE,
NULL, uart_phyp_intr, sc, &sc->sc_icookie);
} else {
callout_init(&sc->callout, CALLOUT_MPSAFE);
sc->polltime = hz / 20;
if (sc->polltime < 1)
sc->polltime = 1;
callout_reset(&sc->callout, sc->polltime, uart_phyp_intr, sc);
}
tty_makedev(sc->tp, NULL, "u%r", unit);
return (0);
}
int
uart_tty_attach(struct uart_softc *sc)
{
struct tty *tp;
int unit;
sc->sc_u.u_tty.tp = tp = tty_alloc(&uart_tty_class, sc);
unit = device_get_unit(sc->sc_dev);
if (sc->sc_sysdev != NULL && sc->sc_sysdev->type == UART_DEV_CONSOLE) {
sprintf(((struct consdev *)sc->sc_sysdev->cookie)->cn_name,
"ttyu%r", unit);
tty_init_console(tp, 0);
}
swi_add(&tty_intr_event, uart_driver_name, uart_tty_intr, sc, SWI_TTY,
INTR_TYPE_TTY, &sc->sc_softih);
tty_makedev(tp, NULL, "u%r", unit);
return (0);
}
int
altera_jtag_uart_attach(struct altera_jtag_uart_softc *sc)
{
struct tty *tp;
int error;
AJU_LOCK_INIT(sc);
/*
* XXXRW: Currently, we detect the console solely based on it using a
* reserved address, and borrow console-level locks and buffer if so.
* Is there a better way?
*/
if (rman_get_start(sc->ajus_mem_res) == BERI_UART_BASE) {
sc->ajus_lockp = &aju_cons_lock;
sc->ajus_buffer_validp = &aju_cons_buffer_valid;
sc->ajus_buffer_datap = &aju_cons_buffer_data;
sc->ajus_jtag_presentp = &aju_cons_jtag_present;
sc->ajus_jtag_missedp = &aju_cons_jtag_missed;
sc->ajus_flags |= ALTERA_JTAG_UART_FLAG_CONSOLE;
} else {
sc->ajus_lockp = &sc->ajus_lock;
sc->ajus_buffer_validp = &sc->ajus_buffer_valid;
sc->ajus_buffer_datap = &sc->ajus_buffer_data;
sc->ajus_jtag_presentp = &sc->ajus_jtag_present;
sc->ajus_jtag_missedp = &sc->ajus_jtag_missed;
}
/*
* Disable interrupts regardless of whether or not we plan to use
* them. We will register an interrupt handler now if they will be
* used, but not re-enable intil later once the remainder of the tty
* layer is properly initialised, as we're not ready for input yet.
*/
AJU_LOCK(sc);
aju_intr_disable(sc);
AJU_UNLOCK(sc);
if (sc->ajus_irq_res != NULL) {
error = bus_setup_intr(sc->ajus_dev, sc->ajus_irq_res,
INTR_ENTROPY | INTR_TYPE_TTY | INTR_MPSAFE, NULL,
aju_intr, sc, &sc->ajus_irq_cookie);
if (error) {
device_printf(sc->ajus_dev,
"could not activate interrupt\n");
AJU_LOCK_DESTROY(sc);
return (error);
}
}
tp = sc->ajus_ttyp = tty_alloc(&aju_ttydevsw, sc);
if (sc->ajus_flags & ALTERA_JTAG_UART_FLAG_CONSOLE) {
aju_cons_sc = sc;
tty_init_console(tp, 0);
}
tty_makedev(tp, NULL, "%s%d", AJU_TTYNAME, sc->ajus_unit);
/*
* If we will be using interrupts, enable them now; otherwise, start
* polling. From this point onwards, input can arrive.
*/
if (sc->ajus_irq_res != NULL) {
AJU_LOCK(sc);
aju_intr_readable_enable(sc);
AJU_UNLOCK(sc);
} else {
callout_init(&sc->ajus_io_callout, CALLOUT_MPSAFE);
callout_reset(&sc->ajus_io_callout, AJU_IO_POLLINTERVAL,
aju_io_callout, sc);
}
callout_init(&sc->ajus_ac_callout, CALLOUT_MPSAFE);
callout_reset(&sc->ajus_ac_callout, AJU_AC_POLLINTERVAL,
aju_ac_callout, sc);
return (0);
}
static int
ucom_attach_tty(struct ucom_super_softc *ssc, struct ucom_softc *sc)
{
struct tty *tp;
char buf[32]; /* temporary TTY device name buffer */
tp = tty_alloc_mutex(&ucom_class, sc, sc->sc_mtx);
if (tp == NULL)
return (ENOMEM);
/* Check if the client has a custom TTY name */
buf[0] = '\0';
if (sc->sc_callback->ucom_tty_name) {
sc->sc_callback->ucom_tty_name(sc, buf,
sizeof(buf), ssc->sc_unit, sc->sc_subunit);
}
if (buf[0] == 0) {
/* Use default TTY name */
if (ssc->sc_subunits > 1) {
/* multiple modems in one */
snprintf(buf, sizeof(buf), UCOM_TTY_PREFIX "%u.%u",
ssc->sc_unit, sc->sc_subunit);
} else {
/* single modem */
snprintf(buf, sizeof(buf), UCOM_TTY_PREFIX "%u",
ssc->sc_unit);
}
}
tty_makedev(tp, NULL, "%s", buf);
sc->sc_tty = tp;
sc->sc_pps.ppscap = PPS_CAPTUREBOTH;
sc->sc_pps.driver_abi = PPS_ABI_VERSION;
sc->sc_pps.driver_mtx = sc->sc_mtx;
pps_init_abi(&sc->sc_pps);
DPRINTF("ttycreate: %s\n", buf);
/* Check if this device should be a console */
if ((ucom_cons_softc == NULL) &&
(ssc->sc_unit == ucom_cons_unit) &&
(sc->sc_subunit == ucom_cons_subunit)) {
DPRINTF("unit %d subunit %d is console",
ssc->sc_unit, sc->sc_subunit);
ucom_cons_softc = sc;
tty_init_console(tp, ucom_cons_baud);
UCOM_MTX_LOCK(ucom_cons_softc);
ucom_cons_rx_low = 0;
ucom_cons_rx_high = 0;
ucom_cons_tx_low = 0;
ucom_cons_tx_high = 0;
sc->sc_flag |= UCOM_FLAG_CONSOLE;
ucom_open(ucom_cons_softc->sc_tty);
ucom_param(ucom_cons_softc->sc_tty, &tp->t_termios_init_in);
UCOM_MTX_UNLOCK(ucom_cons_softc);
}
if ((ssc->sc_flag & UCOM_FLAG_DEVICE_MODE) != 0 &&
ucom_device_mode_console > 0 &&
ucom_cons_softc == NULL) {
struct consdev *cp;
cp = malloc(sizeof(struct consdev), M_USBDEV,
M_WAITOK|M_ZERO);
cp->cn_ops = &ucom_cnops;
cp->cn_arg = NULL;
cp->cn_pri = CN_NORMAL;
strlcpy(cp->cn_name, "tty", sizeof(cp->cn_name));
strlcat(cp->cn_name, buf, sizeof(cp->cn_name));
sc->sc_consdev = cp;
cnadd(cp);
}
return (0);
}
