void ui_usb_sof_event(void)
{
bool b_btn_state;
static bool btn_suspend = false;
static uint16_t counter_sof = 0;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof > ui_device_speed_blink) {
counter_sof = 0;
LED_Toggle(LED1_GPIO);
if (ui_test_done && !ui_test_result) {
/* Test fail then blink led */
LED_Toggle(LED0_GPIO);
}
}
/* Scan button to enter in suspend mode and remote wakeup */
b_btn_state = (!gpio_pin_is_high(GPIO_PUSH_BUTTON_1)) ?
true : false;
if (b_btn_state != btn_suspend) {
/* Button have changed */
btn_suspend = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
LED_Off(LED0_GPIO);
LED_Off(LED1_GPIO);
LED_Off(LED2_GPIO);
ui_enable_asynchronous_interrupt();
uhc_suspend(true);
return;
}
}
}
}
void ui_host_sof_event(void)
{
bool b_btn_state;
static bool btn_suspend_and_remotewakeup = false;
static uint16_t counter_sof = 0;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof > ui_device_speed_blink) {
counter_sof = 0;
LED_Toggle(LED0);
}
/* Scan button to enter in suspend mode and remote wakeup */
b_btn_state = !ioport_get_pin_level(GPIO_PUSH_BUTTON_0);
if (b_btn_state != btn_suspend_and_remotewakeup) {
/* Button have changed */
btn_suspend_and_remotewakeup = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
ui_enable_asynchronous_interrupt();
LED_Off(LED0);
uhc_suspend(true);
return;
}
}
/* Power on a LED when the mouse button down */
if (ui_nb_down) {
LED_On(LED0);
}
}
}
void ui_usb_sof_event(void)
{
bool b_btn_state;
static bool btn_suspend = false;
static uint16_t counter_sof = 0;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof > ui_device_speed_blink) {
counter_sof = 0;
if (ui_hid_mouse_plug) {
LED_Toggle(LED0_GPIO);
} else {
LED_Off(LED0_GPIO);
}
if (ui_msc_plug) {
LED_Toggle(LED1_GPIO);
}
if (ui_test_done && !ui_test_result) {
/* Test fail then blink led */
LED_Toggle(LED2_GPIO);
}
}
/* Power on a LED when mouse move */
if (ui_x || ui_y || ui_scroll) {
ui_x = ui_y = ui_scroll = 0;
LED_On(LED0_GPIO);
}
/* Power on a LED when mouse button down */
if (ui_nb_down) {
LED_On(LED0_GPIO);
}
/* Scan button to enter in suspend mode */
b_btn_state = (!gpio_pin_is_high(GPIO_PUSH_BUTTON_1)) ?
true : false;
if (b_btn_state != btn_suspend) {
/* Button have changed */
btn_suspend = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
LED_Off(LED0_GPIO);
LED_Off(LED1_GPIO);
LED_Off(LED2_GPIO);
LED_Off(LED3_GPIO);
ui_enable_asynchronous_interrupt();
uhc_suspend(true);
return;
}
}
}
}
void ui_usb_sof_event(void)
{
bool b_btn_state;
static bool btn_suspend = false;
static uint16_t counter_sof = 0;
static uint16_t counter_sof_move_refresh = 0;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof > ui_device_speed_blink) {
counter_sof = 0;
if (ui_hid_mouse_plug || ui_msc_plug) {
LED_Toggle(LED0);
} else {
LED_On(LED0);
}
if (ui_test_done && !ui_test_result) {
/* Test fail then blink BL */
backlight_toggle();
}
}
/* Scan button to enter in suspend mode and remote wakeup */
b_btn_state = (!ioport_get_pin_level(GPIO_PUSH_BUTTON_0)) ?
true : false;
if (b_btn_state != btn_suspend) {
/* Button have changed */
btn_suspend = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
LED_Off(LED0);
backlight_off();
ui_enable_asynchronous_interrupt();
uhc_suspend(true);
return;
}
}
/* Move the remote mouse pointer on the Board Monitor screen */
if (++counter_sof_move_refresh > 100) {
counter_sof_move_refresh = 0;
bm_mouse_pointer_move(bm_x / 8, bm_y / 8);
}
/* Power on a LED when the mouse button down */
if (ui_nb_down) {
LED_On(LED0);
}
}
}
void ui_usb_sof_event(void)
{
bool b_btn_state;
static bool btn_suspend = false;
static uint16_t counter_sof = 0;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof > ui_device_speed_blink) {
counter_sof = 0;
if (ui_hid_mouse_plug || ui_msc_plug) {
LED_Toggle(LED0);
} else {
LED_On(LED0);
}
if (ui_test_done) {
if (ui_test_result) {
/* Test successful */
LED_On(LED0);
} else {
/* Test fail */
LED_Off(LED0);
}
}
}
/* Scan button to enter in suspend mode and remote wakeup */
b_btn_state = (!ioport_get_pin_level(GPIO_PUSH_BUTTON_0)) ?
true : false;
if (b_btn_state != btn_suspend) {
/* Button have changed */
btn_suspend = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
LED_Off(LED0);
ui_enable_asynchronous_interrupt();
uhc_suspend(true);
return;
}
}
/* Power on a LED when the mouse button down */
if (ui_nb_down) {
LED_On(LED0);
}
}
}
void ui_usb_sof_event(void)
{
bool b_btn_state;
static bool btn_suspend_and_remotewakeup = false;
static uint16_t counter_sof = 0;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof > ui_device_speed_blink) {
counter_sof = 0;
LED_Toggle(LED_YELLOW0);
}
/* Scan button to enter in suspend mode and remote wakeup */
/*b_btn_state = (!gpio_pin_is_high(GPIO_PUSH_BUTTON_1)) ?
true : false;*/
b_btn_state = true;
if (b_btn_state != btn_suspend_and_remotewakeup) {
/* Button have changed */
btn_suspend_and_remotewakeup = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
ui_enable_asynchronous_interrupt();
USBH_suspend(true);
return;
}
}
/* Power on a LED when the mouse move */
if (!ui_x && !ui_y && !ui_scroll) {
#if 2 == LED_NUM
LED_Clear(LED_YELLOW1);
#endif
} else {
ui_x = ui_y = ui_scroll = 0;
#if 2 == LED_NUM
LED_Set(LED_YELLOW1);
#endif
}
}
}
void ui_host_sof_event(void)
{
bool b_btn_state;
static bool btn_suspend_and_remotewakeup = false;
static uint16_t counter_sof = 0;
if (ui_host_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof == 500) {
counter_sof = 0;
LED_Toggle(LED0);
}
/* Scan button to enter in suspend mode and remote wakeup */
b_btn_state = (!gpio_pin_is_high(GPIO_PUSH_BUTTON_1)) ?
true : false;
if (b_btn_state != btn_suspend_and_remotewakeup) {
/* Button have changed */
btn_suspend_and_remotewakeup = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
LED_Off(LED0);
LED_Off(LED1);
ui_enable_asynchronous_interrupt();
uhc_suspend(true);
return;
}
}
/* Power on a LED when the mouse move */
if (!ui_host_x && !ui_host_y && !ui_host_scroll) {
LED_Off(LED1);
} else {
ui_host_x = ui_host_y = ui_host_scroll = 0;
LED_On(LED1);
}
}
}
void ui_usb_sof_event(void)
{
bool b_btn_state;
static bool btn_suspend = false;
static uint16_t counter_sof = 0;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof > ui_device_speed_blink) {
counter_sof = 0;
LED_Toggle(LED_0_PIN);
if (ui_test_done) {
if (ui_test_result) {
/* Test successful */
LED_On(LED_0_PIN);
} else {
/* Test fail */
LED_Off(LED_0_PIN);
}
}
}
/* Scan button to enter in suspend mode and remote wakeup */
b_btn_state = !port_pin_get_input_level(BUTTON_0_PIN);
if (b_btn_state != btn_suspend) {
/* Button have changed */
btn_suspend = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
LED_Off(LED_0_PIN);
ui_enable_asynchronous_interrupt();
uhc_suspend(true);
return;
}
}
}
}
void ui_usb_enum_event(uhc_device_t *dev, uhc_enum_status_t status)
{
ui_enum_status = status;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
switch (dev->speed) {
case UHD_SPEED_HIGH:
ui_device_speed_blink = 250;
break;
case UHD_SPEED_FULL:
ui_device_speed_blink = 500;
break;
case UHD_SPEED_LOW:
default:
ui_device_speed_blink = 1000;
break;
}
/* USB Device CDC connected
Open and configure UART and USB CDC ports */
usb_cdc_line_coding_t cfg = {
.dwDTERate = CPU_TO_LE32(19200),
.bCharFormat = CDC_STOP_BITS_1,
.bParityType = CDC_PAR_NONE,
.bDataBits = 8,
};
uart_open();
uart_config(&cfg);
uhi_cdc_open(0, &cfg);
}
}
void ui_usb_wakeup_event(void)
{
#ifdef USB_HOST_LPM_SUPPORT
ui_disable_asynchronous_interrupt();
#endif
}
void ui_usb_sof_event(void)
{
#ifdef USB_HOST_LPM_SUPPORT
bool b_btn_state;
static bool btn_suspend_and_remotewakeup = false;
#endif
static uint16_t counter_sof = 0;
if (ui_enum_status == UHC_ENUM_SUCCESS) {
/* Display device enumerated and in active mode */
if (++counter_sof > ui_device_speed_blink) {
counter_sof = 0;
if (!ui_data_transfer) {
LED_Toggle(LED_0_PIN);
}
}
#ifdef USB_HOST_LPM_SUPPORT
/* Scan button to enter in suspend mode and remote wakeup */
b_btn_state = !port_pin_get_input_level(BUTTON_0_PIN);
if (b_btn_state != btn_suspend_and_remotewakeup) {
/* Button have changed */
btn_suspend_and_remotewakeup = b_btn_state;
if (b_btn_state) {
/* Button has been pressed */
ui_enable_asynchronous_interrupt();
LED_Off(LED_0_PIN);
uhc_suspend_lpm(true, HIRD_800_US);
return;
}
}
#endif // #ifdef USB_HOST_LPM_SUPPORT
}
}
void ui_device_remotewakeup_enable(void)
{
ui_enable_asynchronous_interrupt();
}
void ui_wakeup_enable(void)
{
ui_enable_asynchronous_interrupt();
}
