void os_start(void)
{
/* Color the irq stack */
#ifdef CONFIG_STACK_COLORATION
irq_stack_collor((void *)&g_intstackalloc, CONFIG_ARCH_INTERRUPTSTACK/sizeof(uint32_t));
#endif
/* Initialize the timer software subsystem */
timer_init();
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the OS's timer subsystem */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS) && \
!defined(CONFIG_SYSTEMTICK_EXTCLK)
up_timer_initialize();
#endif
/* Keep the compiler happy for a no return function */
while (1)
{
main(0, 0);
}
}
void up_initialize(void)
{
/* Initialize global variables */
current_regs = NULL;
/* Calibrate the timing loop */
up_calibratedelay();
/* Add any extra memory fragments to the memory manager */
up_addregion();
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the DMA subsystem if the weak function up_dmainitialize has been
* brought into the build
*/
#ifdef CONFIG_ARCH_DMA
#ifdef CONFIG_HAVE_WEAKFUNCTIONS
if (up_dmainitialize)
#endif
{
up_dmainitialize();
}
#endif
/* Initialize the system timer interrupt */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
up_timerinit();
#endif
/* Register devices */
#if CONFIG_NFILE_DESCRIPTORS > 0
devnull_register(); /* Standard /dev/null */
#endif
/* Initialize the serial device driver */
#ifdef CONFIG_USE_SERIALDRIVER
up_serialinit();
#elif defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#endif
/* Initialize the netwok */
up_netinitialize();
/* Initialize USB -- device and/or host */
up_usbinitialize();
up_ledon(LED_IRQSENABLED);
}
void up_initialize(void)
{
/* Initialize global variables */
current_regs = NULL;
/* Calibrate the timing loop */
up_calibratedelay();
/* Add extra memory fragments to the memory manager */
#if CONFIG_MM_REGIONS > 1
up_addregion();
#endif
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the system timer interrupt */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
up_timerinit();
#endif
/* Register devices */
#if CONFIG_NFILE_DESCRIPTORS > 0
devnull_register(); /* Standard /dev/null */
#endif
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver */
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#endif
/* Initialize the system logging device */
#ifdef CONFIG_RAMLOG_SYSLOG
ramlog_sysloginit();
#endif
/* Initialize the netwok */
up_netinitialize();
up_ledon(LED_IRQSENABLED);
}
void os_start(void)
{
/* Initialize the timer software subsystem */
timer_init();
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the OS's timer subsystem */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS) && \
!defined(CONFIG_SYSTEMTICK_EXTCLK)
up_timer_initialize();
#endif
/* Keep the compiler happy for a no return function */
while (1)
{
main(0, 0);
}
}
void up_initialize(void)
{
/* Initialize global variables */
current_regs = NULL;
/* Calibrate the timing loop */
up_calibratedelay();
/* Add any extra memory fragments to the memory manager */
up_addregion();
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
* brought into the build
*/
#ifdef CONFIG_ARCH_DMA
#ifdef CONFIG_HAVE_WEAKFUNCTIONS
if (up_dmainitialize)
#endif
{
up_dmainitialize();
}
#endif
/* Initialize the system timer interrupt */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
up_timer_initialize();
#endif
/* Register devices */
#if CONFIG_NFILE_DESCRIPTORS > 0
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
#if defined(CONFIG_DEV_ZERO)
devzero_register(); /* Standard /dev/zero */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_SYSLOG_CONSOLE)
syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#endif
/* Initialize the system logging device */
#ifdef CONFIG_SYSLOG_CHAR
syslog_initialize();
#endif
#ifdef CONFIG_RAMLOG_SYSLOG
ramlog_sysloginit();
#endif
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
#ifdef CONFIG_NETDEV_LOOPBACK
/* Initialize the local loopback device */
(void)localhost_initialize();
#endif
#ifdef CONFIG_NET_TUN
/* Initialize the TUN device */
(void)tun_initialize();
#endif
/* Initialize USB -- device and/or host */
up_usbinitialize();
board_led_on(LED_IRQSENABLED);
}
void up_boot_standby_mode(void)
{
uint32_t gpio_off_mask;
uint32_t regval;
int i;
DEBUGASSERT((getreg32(STM32_PWR_CR) & PWR_CR_DBP) != 0);
/*
* This function is called from up_boot.c, stm32_boardinitialize(). OS is not
* running yet. Regulators and chip-selects have been initialized. IWDG not
* enabled. If board has HWWDG, we must enable it from this function before
* going to standby mode.
*/
regval = getreg32(CONFIG_STANDBYMODE_MAGIC_BKREG);
if (regval != CONFIG_STANDBYMODE_MAGIC)
{
g_board_wakeup_from_standby = (regval == CONFIG_STANDBYMODE_MAGIC + 1);
/* Standby mode was not requested, continue with regular boot. */
putreg32(0, CONFIG_STANDBYMODE_MAGIC_BKREG);
for (i = 0; i < 4; i++)
up_lowputc('r');
return;
}
#if defined(CONFIG_STM32_DFU) || defined (CONFIG_BOARD_HALTIAN_HWWDG)
up_irqinitialize();
#endif
/* Go into standby mode. */
putreg32(CONFIG_STANDBYMODE_MAGIC + 1, CONFIG_STANDBYMODE_MAGIC_BKREG);
for (i = 0; i < 4; i++)
up_lowputc('s');
/* Setup bootloader to jump directly to firmware. */
putreg32(BOARD_FIRMWARE_BASE_ADDR, CONFIG_BOOTLOADER_ADDR_BKREG);
/* Now disable backup register access. If following interrupt handlers
* access backup registers, they need to make sure to re-enable access. */
stm32_pwr_enablebkp(false);
while (true)
{
/* Configure SDcard pins. */
gpio_initialize_sdcard_pins();
/* Configure display GPIOs. */
gpio_off_mask = ~(GPIO_PUPD_MASK | GPIO_MODE_MASK | GPIO_OUTPUT_SET);
stm32_configgpio(GPIO_CHIP_SELECT_DISPLAY);
stm32_configgpio(GPIO_LCD_SSD1309_CMDDATA);
stm32_configgpio(GPIO_LCD_SSD1309_RESET);
stm32_configgpio((GPIO_SPI2_MOSI & gpio_off_mask) | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT);
stm32_configgpio((GPIO_SPI2_SCK & gpio_off_mask) | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT);
/* Reconfigure GPIO's for stop mode (most pins are setup as analog input). */
up_reconfigure_gpios_for_pmstop();
/* We must kick HWWDG even from standby mode, else it resets device. */
board_wdginitialize_autokick(hwwdg_irq_in_standby);
/* Setup 'power'-button as EXTI for wake-up. */
stm32_configgpio(GPIO_BTN_POWERKEY);
stm32_gpiosetevent(GPIO_BTN_POWERKEY, true, false, true,
button_pressed_down_handler);
/* Our standby-mode is really ARM core's stop-mode.
Enter stop-mode with MCU internal regulator in low-power mode. */
(void)stm32_pmstop(true);
standby_do_trace('p');
}
}
void up_initialize(void)
{
/* Initialize global variables */
g_current_regs = NULL;
/* Calibrate the timing loop */
up_calibratedelay();
/* Add any extra memory fragments to the memory manager */
up_addregion();
/* Initialize the interrupt subsystem */
up_irqinitialize();
#ifdef CONFIG_PM
/* Initialize the power management subsystem. This MCU-specific function
* must be called *very* early in the initialization sequence *before* any
* other device drivers are initialized (since they may attempt to register
* with the power management subsystem).
*/
up_pminitialize();
#endif
#ifdef CONFIG_ARCH_DMA
/* Initialize the DMA subsystem if the weak function up_dmainitialize has been
* brought into the build
*/
#ifdef CONFIG_HAVE_WEAKFUNCTIONS
if (up_dmainitialize)
#endif
{
up_dmainitialize();
}
#endif
/* Initialize the system timer interrupt */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
up_timer_initialize();
#endif
/* Register devices */
#if CONFIG_NFILE_DESCRIPTORS > 0
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
#if defined(CONFIG_DEV_RANDOM)
devrandom_register(); /* Standard /dev/random */
#endif
#if defined(CONFIG_DEV_URANDOM)
devurandom_register(); /* Standard /dev/urandom */
#endif
#if defined(CONFIG_DEV_ZERO)
devzero_register(); /* Standard /dev/zero */
#endif
#if defined(CONFIG_DEV_LOOP)
loop_register(); /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */
#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
defined(CONFIG_DRIVER_NOTE)
note_register(); /* Non-standard /dev/note */
#endif
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_CONSOLE_SYSLOG)
syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
/* Register the master pseudo-terminal multiplexor device */
(void)ptmx_register();
#endif
/* Early initialization of the system logging device. Some SYSLOG channel
* can be initialized early in the initialization sequence because they
* depend on only minimal OS initialization.
*/
syslog_initialize(SYSLOG_INIT_EARLY);
#if defined(CONFIG_CRYPTO)
/* Initialize the HW crypto and /dev/crypto */
up_cryptoinitialize();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_CRYPTO_CRYPTODEV)
devcrypto_register();
#endif
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
#ifdef CONFIG_NETDEV_LOOPBACK
/* Initialize the local loopback device */
(void)localhost_initialize();
#endif
#ifdef CONFIG_NET_TUN
/* Initialize the TUN device */
(void)tun_initialize();
#endif
#ifdef CONFIG_NETDEV_TELNET
/* Initialize the Telnet session factory */
(void)telnet_initialize();
#endif
/* Initialize USB -- device and/or host */
up_usbinitialize();
board_autoled_on(LED_IRQSENABLED);
}
void up_initialize(void)
{
/* Colorize the interrupt stack */
up_color_intstack();
/* Add any extra memory fragments to the memory manager */
up_addregion();
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the system timer interrupt */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS) && \
!defined(CONFIG_SYSTEMTICK_EXTCLK)
riscv_timer_initialize();
#endif
#ifdef CONFIG_MM_IOB
/* Initialize IO buffering */
iob_initialize();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0
/* Register devices */
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
#if defined(CONFIG_DEV_ZERO)
devzero_register(); /* Standard /dev/zero */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_SYSLOG_CONSOLE)
syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
/* Register the master pseudo-terminal multiplexor device */
(void)ptmx_register();
#endif
/* Early initialization of the system logging device. Some SYSLOG channel
* can be initialized early in the initialization sequence because they
* depend on only minimal OS initialization.
*/
syslog_initialize(SYSLOG_INIT_EARLY);
#ifdef CONFIG_RAMLOG_SYSLOG
ramlog_sysloginit();
#endif
board_autoled_on(LED_IRQSENABLED);
}
void up_initialize(void)
{
/* Initialize global variables */
current_regs = NULL;
/* Calibrate the timing loop */
up_calibratedelay();
/* Colorize the interrupt stack */
up_color_intstack();
/* Add any extra memory fragments to the memory manager */
up_addregion();
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the power management subsystem. This MCU-specific function
* must be called *very* early in the initialization sequence *before* any
* other device drivers are initialized (since they may attempt to register
* with the power management subsystem).
*/
#ifdef CONFIG_PM
up_pminitialize();
#endif
/* Initialize the DMA subsystem if the weak function up_dmainitialize has been
* brought into the build
*/
#ifdef CONFIG_ARCH_DMA
#ifdef CONFIG_HAVE_WEAKFUNCTIONS
if (up_dmainitialize)
#endif
{
up_dmainitialize();
}
#endif
/* Initialize the system timer interrupt */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS) && \
!defined(CONFIG_SYSTEMTICK_EXTCLK)
up_timer_initialize();
#endif
/* Register devices */
#if CONFIG_NFILE_DESCRIPTORS > 0
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
#if defined(CONFIG_CRYPTO)
up_cryptoinitialize();
#endif
#if defined(CONFIG_CRYPTO_CRYPTODEV)
devcrypto_register(); /* /dev/crypto */
#endif
#if defined(CONFIG_DEV_ZERO)
devzero_register(); /* Standard /dev/zero */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#elif defined(CONFIG_ARM_SEMIHOSTING_CONSOLE)
semihosting_consoleinit();
#elif defined(CONFIG_ARM_ITM_CONSOLE)
itm_consoleinit();
#elif defined(CONFIG_APB_USB_LOG)
usb_log_init();
#endif
/* Initialize the Random Number Generator (RNG) */
#ifdef CONFIG_DEV_RANDOM
up_rnginitialize();
#endif
/* Initialize the system logging device */
#ifdef CONFIG_SYSLOG_CHAR
syslog_initialize();
#endif
#ifdef CONFIG_RAMLOG_SYSLOG
ramlog_sysloginit();
#endif
/* Initialize the network */
up_netinitialize();
/* Initialize USB -- device and/or host */
up_usbinitialize();
/* Initialize the L2 cache if present and selected */
up_l2ccinitialize();
board_led_on(LED_IRQSENABLED);
}
void up_initialize(void)
{
/* Initialize global variables */
current_regs = NULL;
/* Calibrate the timing loop */
up_calibratedelay();
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the system timer interrupt */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
up_timer_initialize();
#endif
/* Register devices */
#if CONFIG_NFILE_DESCRIPTORS > 0
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
#if defined(CONFIG_DEV_ZERO)
devzero_register(); /* Standard /dev/zero */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver). NOTE that the naming implies that the console is a serial
* driver. That is usually the case, however, if no UARTs are enabled, the
* console could als be provided through some other device, such as an LCD.
* Architecture-specific logic will have to detect that case.
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_SYSLOG_CONSOLE)
syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#endif
/* Initialize the system logging device */
#ifdef CONFIG_SYSLOG_CHAR
syslog_initialize();
#endif
#ifdef CONFIG_RAMLOG_SYSLOG
ramlog_sysloginit();
#endif
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
#ifdef CONFIG_NETDEV_LOOPBACK
/* Initialize the local loopback device */
(void)localhost_initialize();
#endif
#ifdef CONFIG_NET_TUN
/* Initialize the TUN device */
(void)tun_initialize();
#endif
/* Initialize USB */
up_usbinitialize();
board_led_on(LED_IRQSENABLED);
}
void up_initialize(void)
{
/* Initialize global variables */
g_current_regs = NULL;
/* Calibrate the timing loop */
up_calibratedelay();
/* Initialize the interrupt subsystem */
up_irqinitialize();
#ifdef CONFIG_PM
/* Initialize the power management subsystem. This MCU-specific function
* must be called *very* early in the initialization sequence *before* any
* other device drivers are initialized (since they may attempt to register
* with the power management subsystem).
*/
up_pminitialize();
#endif
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
/* Initialize the system timer interrupt */
up_timer_initialize();
#endif
/* Register devices */
#if CONFIG_NFILE_DESCRIPTORS > 0
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
#if defined(CONFIG_DEV_RANDOM)
devrandom_register(); /* Standard /dev/random */
#endif
#if defined(CONFIG_DEV_URANDOM)
devurandom_register(); /* Standard /dev/urandom */
#endif
#if defined(CONFIG_DEV_ZERO)
devzero_register(); /* Standard /dev/zero */
#endif
#if defined(CONFIG_DEV_LOOP)
loop_register(); /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */
#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
defined(CONFIG_DRIVER_NOTE)
note_register(); /* Non-standard /dev/note */
#endif
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver). NOTE that the naming implies that the console is a serial
* driver. That is usually the case, however, if no UARTs are enabled, the
* console could als be provided through some other device, such as an LCD.
* Architecture-specific logic will have to detect that case.
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_CONSOLE_SYSLOG)
syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
/* Register the master pseudo-terminal multiplexor device */
(void)ptmx_register();
#endif
/* Early initialization of the system logging device. Some SYSLOG channel
* can be initialized early in the initialization sequence because they
* depend on only minimal OS initialization.
*/
syslog_initialize(SYSLOG_INIT_EARLY);
#if defined(CONFIG_CRYPTO)
/* Initialize the HW crypto and /dev/crypto */
up_cryptoinitialize();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_CRYPTO_CRYPTODEV)
devcrypto_register();
#endif
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
#ifdef CONFIG_NETDEV_LOOPBACK
/* Initialize the local loopback device */
(void)localhost_initialize();
#endif
#ifdef CONFIG_NET_TUN
/* Initialize the TUN device */
(void)tun_initialize();
#endif
#ifdef CONFIG_NETDEV_TELNET
/* Initialize the Telnet session factory */
(void)telnet_initialize();
#endif
/* Initialize USB */
up_usbinitialize();
board_autoled_on(LED_IRQSENABLED);
}
void up_initialize(void)
{
/* Initialize global variables */
INIT_IRQCONTEXT();
/* Calibrate the timing loop */
up_calibratedelay();
#if CONFIG_MM_REGIONS > 1
/* Add any extra memory fragments to the memory manager */
up_addregion();
#endif
/* Initialize the interrupt subsystem */
up_irqinitialize();
#ifdef CONFIG_PM
/* Initialize the power management subsystem. This MCU-specific function
* must be called *very* early in the initialization sequence *before* any
* other device drivers are initialized (since they may attempt to register
* with the power management subsystem).
*/
up_pminitialize();
#endif
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
/* Initialize the system timer interrupt */
z80_timer_initialize();
#endif
/* Initialize the CPU for those that use it (only for the Z180). This
* needs to be done before any tasks are created).
*/
#ifdef CONFIG_ARCH_ADDRENV
(void)up_mmuinit();
#endif
#ifdef CONFIG_MM_IOB
/* Initialize IO buffering */
iob_initialize();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0
/* Register devices */
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
#if defined(CONFIG_DEV_RANDOM)
devrandom_register(); /* Standard /dev/random */
#endif
#if defined(CONFIG_DEV_URANDOM)
devurandom_register(); /* Standard /dev/urandom */
#endif
#if defined(CONFIG_DEV_ZERO)
devzero_register(); /* Standard /dev/zero */
#endif
#if defined(CONFIG_DEV_LOOP)
loop_register(); /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */
#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
defined(CONFIG_DRIVER_NOTE)
note_register(); /* Non-standard /dev/note */
#endif
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_CONSOLE_SYSLOG)
syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
/* Register the master pseudo-terminal multiplexor device */
(void)ptmx_register();
#endif
/* Early initialization of the system logging device. Some SYSLOG channel
* can be initialized early in the initialization sequence because they
* depend on minimal OS initialization.
*/
syslog_initialize(SYSLOG_INIT_EARLY);
#if defined(CONFIG_CRYPTO)
/* Initialize the HW crypto and /dev/crypto */
up_cryptoinitialize();
#endif
#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_CRYPTO_CRYPTODEV)
devcrypto_register();
#endif
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
#ifdef CONFIG_NETDEV_LOOPBACK
/* Initialize the local loopback device */
(void)localhost_initialize();
#endif
#ifdef CONFIG_NET_TUN
/* Initialize the TUN device */
(void)tun_initialize();
#endif
#ifdef CONFIG_NETDEV_TELNET
/* Initialize the Telnet session factory */
(void)telnet_initialize();
#endif
board_autoled_on(LED_IRQSENABLED);
}
void up_initialize(void)
{
/* Initialize global variables */
current_regs = NULL;
/* Calibrate the timing loop */
up_calibratedelay();
/* Add any extra memory fragments to the memory manager */
#if CONFIG_MM_REGIONS > 1
up_addregion();
#endif
/* Initialize the interrupt subsystem */
up_irqinitialize();
/* Initialize the system timer interrupt */
#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
up_timer_initialize();
#endif
/* Register devices */
#if CONFIG_NFILE_DESCRIPTORS > 0
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
#if defined(CONFIG_DEV_ZERO)
devzero_register(); /* Standard /dev/zero */
#endif
#if defined(CONFIG_DEV_LOOP)
loop_register(); /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_SYSLOG_CONSOLE)
syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();
#endif
/* Initialize the system logging device */
#ifdef CONFIG_SYSLOG_CHAR
syslog_initialize();
#endif
#ifdef CONFIG_RAMLOG_SYSLOG
ramlog_sysloginit();
#endif
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
#ifdef CONFIG_NETDEV_LOOPBACK
/* Initialize the local loopback device */
(void)localhost_initialize();
#endif
#ifdef CONFIG_NET_TUN
/* Initialize the TUN device */
(void)tun_initialize();
#endif
#ifdef CONFIG_NETDEV_TELNET
/* Initialize the Telnet session factory */
(void)telnet_initialize();
#endif
board_autoled_on(LED_IRQSENABLED);
}
