/*
* ESC & l <yoff_dp> Z
*
* Note that this shifts the logical page, but does NOT change its size nor
* does it reset any logical-page related parameters.
*/
static int
set_top_offset_registration(pcl_args_t * pargs, pcl_state_t * pcs)
{
pcs->xfm_state.top_offset_cp = float_arg(pargs) * 10;
update_xfm_state(pcs, 0);
return 0;
}
/*
* ESC & a <angle> P
*/
static int
set_print_direction(pcl_args_t * pargs, pcl_state_t * pcs)
{
uint i = uint_arg(pargs);
if ((i <= 270) && (i % 90 == 0)) {
i /= 90;
if (i != pcs->xfm_state.print_dir) {
pcl_break_underline(pcs);
pcs->xfm_state.print_dir = i;
update_xfm_state(pcs, 0);
pcl_continue_underline(pcs);
} else {
pcs->xfm_state.print_dir = i;
update_xfm_state(pcs, 0);
}
}
return 0;
}
/*
* End a page, either unconditionally or only if there are marks on it.
* Return 1 if the page was actually printed and erased.
*/
int
pcl_end_page(
pcl_state_t * pcs,
pcl_print_condition_t condition
)
{
int code = 0;
pcl_break_underline(pcs); /* (could mark page) */
/* If we are conditionally printing (normal case) check if the
page is marked */
if (condition != pcl_print_always) {
if ( !pcl_page_marked(pcs) )
return 0;
}
/* If there's an overlay macro, execute it now. */
if (pcs->overlay_enabled) {
void * value;
if ( pl_dict_find( &pcs->macros,
id_key(pcs->overlay_macro_id),
2,
&value
) ) {
pcs->overlay_enabled = false; /**** IN reset_overlay ****/
code = pcl_execute_macro( (const pcl_macro_t *)value,
pcs,
pcl_copy_before_overlay,
pcl_reset_overlay,
pcl_copy_after_overlay
);
pcs->overlay_enabled = true; /**** IN copy_after ****/
}
}
/* output the page */
code = (*pcs->end_page)(pcs, pcs->num_copies, true);
if ( code < 0 )
return code;
/* allow the logical orientation command to be used again */
pcs->orientation_set = false;
if ( pcs->end_page == pcl_end_page_top )
code = gs_erasepage(pcs->pgs);
pcs->page_marked = false;
/* force new logical page, allows external resolution changes.
* see -dFirstPage -dLastPage
* NB would be faster if we didn't do this every page.
*
* NB setting a new logical page defaults settings
* that should carry over from the previous page
* this error occurs only on documents that don't do any initilizations per page
* hence only the viewer applications will see the speedup and the error
*/
if (!pjl_proc_compare(pcs->pjls, pjl_proc_get_envvar(pcs->pjls, "viewer"), "on")) {
new_logical_page(pcs, pcs->xfm_state.lp_orient,
pcs->xfm_state.paper_size, false, false);
}
/*
* Advance of a page may move from a page front to a page back. This may
* change the applicable transformations.
*/
update_xfm_state(pcs, 0);
pcl_continue_underline(pcs);
return (code < 0 ? code : 1);
}
/*
* Reset all parameters which must be reset whenever the page size changes.
*
* The third operand indicates if this routine is being called as part of
* an initial reset. In that case, done't call HPGL's reset - the reset
* will do that later.
*/
static void
new_page_size(
pcl_state_t * pcs,
const pcl_paper_size_t * psize,
bool reset_initial,
bool for_passthrough
)
{
floatp width_pts = psize->width * 0.01;
floatp height_pts = psize->height * 0.01;
float page_size[2];
static float old_page_size[2] = { 0, 0 };
gs_state * pgs = pcs->pgs;
gs_matrix mat;
bool changed_page_size;
page_size[0] = width_pts;
page_size[1] = height_pts;
old_page_size[0] = pcs->xfm_state.paper_size ? pcs->xfm_state.paper_size->width : 0;
old_page_size[1] = pcs->xfm_state.paper_size ? pcs->xfm_state.paper_size->height : 0;
put_param1_float_array(pcs, "PageSize", page_size);
/*
* Reset the default transformation.
*
* The graphic library provides a coordinate system in points, with the
* origin at the lower left corner of the page. The PCL code uses a
* coordinate system in centi-points, with the origin at the upper left
* corner of the page.
*/
gs_setdefaultmatrix(pgs, NULL);
gs_initmatrix(pgs);
gs_currentmatrix(pgs, &mat);
gs_matrix_translate(&mat, 0.0, height_pts, &mat);
gs_matrix_scale(&mat, 0.01, -0.01, &mat);
gs_setdefaultmatrix(pgs, &mat);
pcs->xfm_state.paper_size = psize;
pcs->overlay_enabled = false;
update_xfm_state(pcs, reset_initial);
reset_margins(pcs, for_passthrough);
/* check if update_xfm_state changed the page size */
changed_page_size = !(old_page_size[0] == pcs->xfm_state.paper_size->width &&
old_page_size[1] == pcs->xfm_state.paper_size->height);
/*
* make sure underlining is disabled (homing the cursor may cause
* an underline to be put out.
*/
pcs->underline_enabled = false;
pcl_home_cursor(pcs);
pcl_xfm_reset_pcl_pat_ref_pt(pcs);
if (!reset_initial)
hpgl_do_reset(pcs, pcl_reset_page_params);
if ( pcs->end_page == pcl_end_page_top ) { /* don't erase in snippet mode */
if (pcs->page_marked || changed_page_size) {
gs_erasepage(pcs->pgs);
pcs->page_marked = false;
}
}
}
/*
* End a page, either unconditionally or only if there are marks on it.
* Return 1 if the page was actually printed and erased.
*/
int
pcl_end_page(pcl_state_t * pcs, pcl_print_condition_t condition)
{
int code = 0;
pcl_break_underline(pcs); /* (could mark page) */
/* If we are conditionally printing (normal case) check if the
page is marked */
if (condition != pcl_print_always) {
if (!pcl_page_marked(pcs))
return 0;
}
/* finish up graphics mode in case we finished the page in the
middle of a raster stream */
if (pcs->raster_state.graphics_mode)
pcl_end_graphics_mode(pcs);
/* If there's an overlay macro, execute it now. */
if (pcs->overlay_enabled) {
void *value;
if (pl_dict_find(&pcs->macros,
id_key(pcs->overlay_macro_id), 2, &value)) {
pcs->overlay_enabled = false; /**** IN reset_overlay ****/
code = pcl_execute_macro((const pcl_macro_t *)value,
pcs,
pcl_copy_before_overlay,
pcl_reset_overlay,
pcl_copy_after_overlay);
if (code < 0)
return code;
pcs->overlay_enabled = true; /**** IN copy_after ****/
}
}
/* output the page */
code = (*pcs->end_page) (pcs, pcs->num_copies, true);
if (code < 0)
return code;
if (pcs->end_page == pcl_end_page_top)
code = gs_erasepage(pcs->pgs);
pcs->page_marked = false;
/*
* Advance of a page may move from a page front to a page back. This may
* change the applicable transformations.
*/
/*
* Keep track of the side you are on
*/
if (pcs->duplex) {
pcs->back_side = ! pcs->back_side;
} else {
pcs->back_side = false;
}
put_param1_bool(pcs,"FirstSide", !pcs->back_side);
update_xfm_state(pcs, 0);
pcl_continue_underline(pcs);
return (code < 0 ? code : 1);
}
