static kal_uint32 charging_get_charger_det_status(void *data)
{
kal_uint32 status = STATUS_OK;
#if defined(CHRDET_SW_MODE_EN)
kal_uint32 vchr_val=0;
vchr_val = PMIC_IMM_GetOneChannelValue(4,5,1);
vchr_val = (((330+39)*100*vchr_val)/39)/100;
if( vchr_val > 4300 )
{
battery_xlog_printk(BAT_LOG_FULL, "[CHRDET_SW_WORKAROUND_EN] upmu_is_chr_det=Y (%d)\n", vchr_val);
*(kal_uint32 *)data = KAL_TRUE;
}
else
{
battery_xlog_printk(BAT_LOG_FULL, "[CHRDET_SW_WORKAROUND_EN] upmu_is_chr_det=N (%d)\n", vchr_val);
*(kal_uint32 *)data = KAL_FALSE;
}
#else
*(kal_bool*)(data) = upmu_get_rgs_chrdet();
#endif
if( upmu_get_rgs_chrdet() == 0 )
g_charger_type = CHARGER_UNKNOWN;
return status;
}
static kal_uint32 charging_get_charger_det_status(void *data)
{
kal_uint32 status = STATUS_OK;
*(kal_bool*)(data) = upmu_get_rgs_chrdet();
if( upmu_get_rgs_chrdet() == 0 )
g_charger_type = CHARGER_UNKNOWN;
return status;
}
static kal_uint32 charging_get_charger_det_status(void *data)
{
int online;
int rc;
if (upmu_get_rgs_chrdet() == 0) {
*(kal_bool*)(data) = KAL_FALSE;
g_charger_type = CHARGER_UNKNOWN;
#ifdef CONFIG_LGE_PM
charging_type_det_retry = KAL_FALSE;
#endif
} else {
*(kal_bool*)(data) = KAL_TRUE;
rc = get_property(POWER_SUPPLY_PROP_ONLINE, &online);
if (rc) {
/* error reading online status. use pmic value */
battery_xlog_printk(BAT_LOG_CRTI, "[PowerSupply] cannot read online.\n");
return STATUS_OK;
}
if (!online) {
/* OVP detected in external charger */
*(kal_bool*)(data) = KAL_FALSE;
g_charger_type = CHARGER_UNKNOWN;
}
}
battery_xlog_printk(BAT_LOG_FULL, "[PowerSupply] g_charger_type = %d\n", g_charger_type);
return STATUS_OK;
}
static kal_uint32 charging_get_charger_det_status(void *data)
{
kal_uint32 status = STATUS_OK;
*(kal_bool*)(data) = upmu_get_rgs_chrdet();
return status;
}
bool usb_cable_connected(void)
{
#ifdef CONFIG_POWER_EXT
CHARGER_TYPE chg_type = mt_charger_type_detection();
os_printk(K_INFO, "%s ext-chrdet=%d type=%d\n", __func__, upmu_get_rgs_chrdet(), chg_type);
if (upmu_get_rgs_chrdet() && (chg_type == STANDARD_HOST))
#else
os_printk(K_INFO, "%s chrdet=%d\n", __func__, upmu_is_chr_det());
if (upmu_is_chr_det())
#endif
{
return true;
} else {
return false;
}
return true;
}
/*
* FUNCTION
* Internal_chr_control_handler
*
* DESCRIPTION
* This function is called to set the charger hw
*
* CALLS
*
* PARAMETERS
* None
*
* RETURNS
*
*
* GLOBALS AFFECTED
* None
*/
kal_int32 chr_control_interface(CHARGING_CTRL_CMD cmd, void *data)
{
kal_int32 status;
int i;
switch(cmd) {
/* these commands does not need power_supply, so jump to do_cmd */
case CHARGING_CMD_INIT:
case CHARGING_CMD_RESET_WATCH_DOG_TIMER:
case CHARGING_CMD_SET_HV_THRESHOLD:
case CHARGING_CMD_GET_HV_STATUS:
case CHARGING_CMD_GET_BATTERY_STATUS:
case CHARGING_CMD_GET_IS_PCM_TIMER_TRIGGER:
case CHARGING_CMD_SET_PLATFORM_RESET:
case CHARGING_CMD_GET_PLATFORM_BOOT_MODE:
case CHARGING_CMD_SET_POWER_OFF:
case CHARGING_CMD_GET_POWER_SOURCE:
case CHARGING_CMD_GET_CSDAC_FALL_FLAG:
case CHARGING_CMD_SET_TA_CURRENT_PATTERN:
case CHARGING_CMD_SET_ERROR_STATE:
goto chr_control_interface_do_cmd;
break;
default:
break;
}
if (!power_supply) {
/* find charger */
for (i = 0; i < ARRAY_SIZE(support_charger); i++) {
power_supply = power_supply_get_by_name(support_charger[i]);
if (power_supply)
break;
}
/* if not found, cannot control charger */
if (!power_supply) {
battery_xlog_printk(BAT_LOG_CRTI, "[PowerSupply] failed to get power_supply.\n");
return STATUS_UNSUPPORTED;
}
/* If power source is attached, assume that device is charing now */
if (upmu_get_rgs_chrdet()) {
g_charging_enabled = true;
}
}
chr_control_interface_do_cmd:
status = charging_func[cmd](data);
return status;
}