/* Main code - entry point to firmware */
void main(void)
{
/* FTDI:SDD Driver Declarations */
// UART Driver configuration context
uart_context_t uartContext;
// GPIO Port A configuration context
gpio_context_t gpioContextA;
// USB Host configuration context
usbhost_context_t usbhostContext;
/* FTDI:EDD */
/* FTDI:SKI Kernel Initialisation */
vos_init(50, VOS_TICK_INTERVAL, VOS_NUMBER_DEVICES);
vos_set_clock_frequency(VOS_48MHZ_CLOCK_FREQUENCY);
vos_set_idle_thread_tcb_size(512);
/* FTDI:EKI */
iomux_setup();
/* FTDI:SDI Driver Initialisation */
// Initialise UART
uartContext.buffer_size = VOS_BUFFER_SIZE_128_BYTES;
uart_init(VOS_DEV_UART,&uartContext);
// Initialise GPIO A
gpioContextA.port_identifier = GPIO_PORT_A;
gpio_init(VOS_DEV_GPIO_PORT_A,&gpioContextA);
// Initialise USB HID Device
usbHostHID_init(VOS_DEV_USBHOST_HID);
// Initialise USB Host
usbhostContext.if_count = 8;
usbhostContext.ep_count = 16;
usbhostContext.xfer_count = 2;
usbhostContext.iso_xfer_count = 2;
usbhost_init(-1, VOS_DEV_USBHOST_2, &usbhostContext);
/* FTDI:EDI */
/* FTDI:SCT Thread Creation */
tcbFIRMWARE = vos_create_thread_ex(20, 4096, firmware, "Application", 0);
/* FTDI:ECT */
vos_start_scheduler();
main_loop:
goto main_loop;
}
/* Main code - entry point to firmware */
void main(void)
{
/* FTDI:SDD Driver Declarations */
// UART Driver configuration context
uart_context_t uartContext;
// SPI Master configuration context
spimaster_context_t spimContext;
// GPIO Port A configuration context
gpio_context_t gpioContextA;
// GPIO Port B configuration context
gpio_context_t gpioContextB;
// USB Host configuration context
usbhost_context_t usbhostContext;
/* FTDI:EDD */
/* FTDI:SKI Kernel Initialisation */
vos_init(50, VOS_TICK_INTERVAL, VOS_NUMBER_DEVICES);
vos_set_clock_frequency(VOS_48MHZ_CLOCK_FREQUENCY);
vos_set_idle_thread_tcb_size(512);
/* FTDI:EKI */
iomux_setup();
/* FTDI:SDI Driver Initialisation */
// Initialise UART
uartContext.buffer_size = VOS_BUFFER_SIZE_128_BYTES;
uart_init(VOS_DEV_UART,&uartContext);
// Initialise SPI Master
spimContext.buffer_size = VOS_BUFFER_SIZE_128_BYTES;
spimaster_init(VOS_DEV_SPI_MASTER,&spimContext);
// Initialise GPIO A
gpioContextA.port_identifier = GPIO_PORT_A;
gpio_init(VOS_DEV_GPIO_PORT_A,&gpioContextA);
// Initialise GPIO B
gpioContextB.port_identifier = GPIO_PORT_B;
gpio_init(VOS_DEV_GPIO_PORT_B,&gpioContextB);
// Initialise FAT File System Driver
fatdrv_init(VOS_DEV_FAT_FILE_SYSTEM);
// Initialise BOMS Device Driver
boms_init(VOS_DEV_BOMS);
// Initialise USB HID Device
usbHostHID_init(VOS_DEV_USBHOST_HID_1);
// Initialise USB HID Device
usbHostHID_init(VOS_DEV_USBHOST_HID_2);
// Initialise USB Host
usbhostContext.if_count = 8;
usbhostContext.ep_count = 16;
usbhostContext.xfer_count = 2;
usbhostContext.iso_xfer_count = 2;
if(usbhost_init(VOS_DEV_USBHOST_1, VOS_DEV_USBHOST_2, &usbhostContext) != 0)
while(1); //FAILED
/* FTDI:EDI */
/* FTDI:SCT Thread Creation */
tcbFIRMWARE = vos_create_thread_ex(31, 2048, firmware, "Application", 0);
/* FTDI:ECT */
vos_delay_msecs(100);
vos_start_scheduler();
main_loop:
vos_delay_msecs(100);
goto main_loop;
}
