/**
* gether_disconnect - notify network layer that USB link is inactive
* @link: the USB link, on which gether_connect() was called
* Context: irqs blocked
*
* This is called to deactivate endpoints and let the network layer know
* the connection went inactive ("no carrier").
*
* On return, the state is as if gether_connect() had never been called.
* The endpoints are inactive, and accordingly without active USB I/O.
* Pointers to endpoint descriptors and endpoint private data are nulled.
*/
void gether_disconnect(struct gether *link)
{
struct eth_dev *dev = link->ioport;
struct usb_request *req;
WARN_ON(!dev);
if (!dev)
return;
DBG(dev, "%s\n", __func__);
netif_stop_queue(dev->net);
netif_carrier_off(dev->net);
/* disable endpoints, forcing (synchronous) completion
* of all pending i/o. then free the request objects
* and forget about the endpoints.
*/
usb_ep_disable(link->in_ep);
spin_lock(&dev->req_lock);
while (!list_empty(&dev->tx_reqs)) {
req = container_of(dev->tx_reqs.next,
struct usb_request, list);
list_del(&req->list);
spin_unlock(&dev->req_lock);
usb_ep_free_request(link->in_ep, req);
spin_lock(&dev->req_lock);
}
spin_unlock(&dev->req_lock);
link->in_ep->driver_data = NULL;
link->in = NULL;
usb_ep_disable(link->out_ep);
usb_ep_fifo_flush(link->in_ep);
usb_ep_fifo_flush(link->out_ep);
spin_lock(&dev->req_lock);
while (!list_empty(&dev->rx_reqs)) {
req = container_of(dev->rx_reqs.next,
struct usb_request, list);
list_del(&req->list);
spin_unlock(&dev->req_lock);
usb_ep_free_request(link->out_ep, req);
spin_lock(&dev->req_lock);
}
spin_unlock(&dev->req_lock);
link->out_ep->driver_data = NULL;
link->out = NULL;
/* finish forgetting about this USB link episode */
dev->header_len = 0;
dev->unwrap = NULL;
dev->wrap = NULL;
spin_lock(&dev->lock);
dev->port_usb = NULL;
link->ioport = NULL;
spin_unlock(&dev->lock);
}
void gether_disconnect(struct gether *link)
{
struct eth_dev *dev = link->ioport;
struct usb_request *req;
WARN_ON(!dev);
if (!dev)
return;
DBG(dev, "%s\n", __func__);
netif_stop_queue(dev->net);
netif_carrier_off(dev->net);
usb_ep_disable(link->in_ep);
spin_lock(&dev->req_lock);
while (!list_empty(&dev->tx_reqs)) {
req = container_of(dev->tx_reqs.next,
struct usb_request, list);
list_del(&req->list);
spin_unlock(&dev->req_lock);
usb_ep_free_request(link->in_ep, req);
spin_lock(&dev->req_lock);
}
spin_unlock(&dev->req_lock);
link->in_ep->driver_data = NULL;
link->in = NULL;
usb_ep_disable(link->out_ep);
usb_ep_fifo_flush(link->in_ep);
usb_ep_fifo_flush(link->out_ep);
spin_lock(&dev->req_lock);
while (!list_empty(&dev->rx_reqs)) {
req = container_of(dev->rx_reqs.next,
struct usb_request, list);
list_del(&req->list);
spin_unlock(&dev->req_lock);
usb_ep_free_request(link->out_ep, req);
spin_lock(&dev->req_lock);
}
spin_unlock(&dev->req_lock);
link->out_ep->driver_data = NULL;
link->out = NULL;
dev->header_len = 0;
dev->unwrap = NULL;
dev->wrap = NULL;
spin_lock(&dev->lock);
dev->port_usb = NULL;
link->ioport = NULL;
spin_unlock(&dev->lock);
}
static long ep_ioctl(struct file *fd, unsigned code, unsigned long value)
{
struct ep_data *data = fd->private_data;
int status;
if ((status = get_ready_ep (fd->f_flags, data, false)) < 0)
return status;
spin_lock_irq (&data->dev->lock);
if (likely (data->ep != NULL)) {
switch (code) {
case GADGETFS_FIFO_STATUS:
status = usb_ep_fifo_status (data->ep);
break;
case GADGETFS_FIFO_FLUSH:
usb_ep_fifo_flush (data->ep);
break;
case GADGETFS_CLEAR_HALT:
status = usb_ep_clear_halt (data->ep);
break;
default:
status = -ENOTTY;
}
} else
status = -ENODEV;
spin_unlock_irq (&data->dev->lock);
mutex_unlock(&data->lock);
return status;
}
/**
* gserial_disconnect - notify TTY I/O glue that USB link is inactive
* @gser: the function, on which gserial_connect() was called
* Context: any (usually from irq)
*
* This is called to deactivate endpoints and let the TTY layer know
* that the connection went inactive ... not unlike "hangup".
*
* On return, the state is as if gserial_connect() had never been called;
* there is no active USB I/O on these endpoints.
*/
void gserial_disconnect(struct gserial *gser)
{
struct gs_port *port = gser->ioport;
unsigned long flags;
pr_vdebug("%s\n", __func__);
if (!port)
return;
/* tell the TTY glue not to do I/O here any more */
spin_lock_irqsave(&port->port_lock, flags);
/* REVISIT as above: how best to track this? */
port->port_line_coding = gser->port_line_coding;
port->port_usb = NULL;
gser->ioport = NULL;
#if 0
if (port->open_count > 0 || port->openclose) {
wake_up_interruptible(&port->drain_wait);
if (port->port_tty)
tty_hangup(port->port_tty);
}
#endif
spin_unlock_irqrestore(&port->port_lock, flags);
/* disable endpoints, aborting down any active I/O */
usb_ep_fifo_flush(gser->out);
usb_ep_fifo_flush(gser->in);
usb_ep_disable(gser->out);
gser->out->driver_data = NULL;
usb_ep_disable(gser->in);
gser->in->driver_data = NULL;
/* finally, free any unused/unusable I/O buffers */
spin_lock_irqsave(&port->port_lock, flags);
if (port->open_count == 0 && !port->openclose)
gs_buf_free(&port->port_write_buf);
gs_free_requests(gser->out, &port->read_pool);
gs_free_requests(gser->out, &port->read_queue);
gs_free_requests(gser->in, &port->write_pool);
spin_unlock_irqrestore(&port->port_lock, flags);
}
void gserial_disconnect(struct gserial *gser)
{
struct gs_port *port = gser->ioport;
unsigned long flags;
if (!port)
return;
spin_lock_irqsave(&port->port_lock, flags);
port->port_line_coding = gser->port_line_coding;
port->port_usb = NULL;
gser->ioport = NULL;
if (port->open_count > 0 || port->openclose) {
wake_up_interruptible(&port->drain_wait);
if (port->port_tty)
tty_hangup(port->port_tty);
}
spin_unlock_irqrestore(&port->port_lock, flags);
usb_ep_fifo_flush(gser->out);
usb_ep_fifo_flush(gser->in);
usb_ep_disable(gser->out);
gser->out->driver_data = NULL;
usb_ep_disable(gser->in);
gser->in->driver_data = NULL;
spin_lock_irqsave(&port->port_lock, flags);
if (port->open_count == 0 && !port->openclose)
gs_buf_free(&port->port_write_buf);
gs_free_requests(gser->out, &port->read_pool);
gs_free_requests(gser->out, &port->read_queue);
gs_free_requests(gser->in, &port->write_pool);
spin_unlock_irqrestore(&port->port_lock, flags);
}
static void mtp_int_complete(struct usb_ep *ep, struct usb_request *req)
{
mtp_debug("status is %d %d\n", req->status, req->actual);
if (req->status == -ECONNRESET)
usb_ep_fifo_flush(ep);
if (req->status != 0)
mtp_err("status is %d %p len=%d\n",
req->status, req, req->actual);
g_usb_mtp_context.intr_in_busy = 0;
return;
}
static void gser_disable(struct usb_function *f)
{
struct f_gser *gser = func_to_gser(f);
struct usb_composite_dev *cdev = f->config->cdev;
DBG(cdev, "generic ttyGS%d deactivated\n", gser->port_num);
gport_disconnect(gser);
#ifdef CONFIG_MODEM_SUPPORT
usb_ep_fifo_flush(gser->notify);
usb_ep_disable(gser->notify);
#endif
gser->online = 0;
}
static void mtp_out_complete(struct usb_ep *ep, struct usb_request *req)
{
mtp_debug("status is %d %p %d\n", req->status, req, req->actual);
if (req->status == 0) {
req_put(&g_usb_mtp_context.rx_done_reqs, req);
} else {
mtp_debug("status is %d %p len=%d\n",
req->status, req, req->actual);
g_usb_mtp_context.error = 1;
if (req->status == -ECONNRESET)
usb_ep_fifo_flush(ep);
req_put(&g_usb_mtp_context.rx_reqs, req);
}
wake_up(&g_usb_mtp_context.rx_wq);
}
static void mtp_in_complete(struct usb_ep *ep, struct usb_request *req)
{
mtp_debug("status is %d %p %d\n", req->status, req, req->actual);
if (req->status == -ECONNRESET)
usb_ep_fifo_flush(ep);
if (req->status != 0) {
g_usb_mtp_context.error = 1;
mtp_err("status is %d %p len=%d\n",
req->status, req, req->actual);
}
req_put(&g_usb_mtp_context.tx_reqs, req);
wake_up(&g_usb_mtp_context.tx_wq);
}
static void mtp_function_disable(struct usb_function *f)
{
printk(KERN_DEBUG "%s(): disabled\n", __func__);
g_usb_mtp_context.online = 0;
g_usb_mtp_context.cancel = 1;
g_usb_mtp_context.ctl_cancel = 1;
g_usb_mtp_context.error = 1;
usb_ep_fifo_flush(g_usb_mtp_context.bulk_in);
usb_ep_fifo_flush(g_usb_mtp_context.bulk_out);
usb_ep_fifo_flush(g_usb_mtp_context.intr_in);
usb_ep_disable(g_usb_mtp_context.bulk_in);
usb_ep_disable(g_usb_mtp_context.bulk_out);
usb_ep_disable(g_usb_mtp_context.intr_in);
g_usb_mtp_context.cur_read_req = 0;
g_usb_mtp_context.read_buf = 0;
g_usb_mtp_context.data_len = 0;
/* readers may be blocked waiting for us to go online */
wake_up(&g_usb_mtp_context.rx_wq);
wake_up(&g_usb_mtp_context.tx_wq);
wake_up(&g_usb_mtp_context.ctl_rx_wq);
wake_up(&g_usb_mtp_context.ctl_tx_wq);
}
static void mtp_out_complete(struct usb_ep *ep, struct usb_request *req)
{
mtp_debug("status is %d %p %d\n", req->status, req, req->actual);
if (req->status == 0) {
req_put(&g_usb_mtp_context.rx_done_reqs, req);
} else {
mtp_err("status is %d %p len=%d\n",
req->status, req, req->actual);
g_usb_mtp_context.error = 1;
if (req->status == -ECONNRESET)
{
#ifdef CONFIG_LGE_USB_GADGET_MTP_DRIVER
lg_mtp_debug("LG_FW : BULK OUT DATA Flush!!\n");
#endif
usb_ep_fifo_flush(ep);
}
req_put(&g_usb_mtp_context.rx_reqs, req);
}
wake_up(&g_usb_mtp_context.rx_wq);
}
static void gs_close(struct tty_struct *tty, struct file *file)
{
struct gs_port *port = tty->driver_data;
struct gserial *gser;
spin_lock_irq(&port->port_lock);
if (port->open_count != 1) {
if (port->open_count == 0)
WARN_ON(1);
else
--port->open_count;
goto exit;
}
pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
/* mark port as closing but in use; we can drop port lock
* and sleep if necessary
*/
port->openclose = true;
port->open_count = 0;
gser = port->port_usb;
if (gser && gser->disconnect)
gser->disconnect(gser);
/* wait for circular write buffer to drain, disconnect, or at
* most GS_CLOSE_TIMEOUT seconds; then discard the rest
*/
if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
spin_unlock_irq(&port->port_lock);
wait_event_interruptible_timeout(port->drain_wait,
gs_writes_finished(port),
GS_CLOSE_TIMEOUT * HZ);
spin_lock_irq(&port->port_lock);
gser = port->port_usb;
}
/* Iff we're disconnected, there can be no I/O in flight so it's
* ok to free the circular buffer; else just scrub it. And don't
* let the push work queue fire again until we're re-opened.
*/
if (gser == NULL)
gs_buf_free(&port->port_write_buf);
else
gs_buf_clear(&port->port_write_buf);
tty->driver_data = NULL;
port->port_tty = NULL;
port->openclose = false;
pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
port->port_num, tty, file);
wake_up_interruptible(&port->close_wait);
/*
* Freeing the previously queued requests as they are
* allocated again as a part of gs_open()
*/
if (port->port_usb) {
spin_unlock_irq(&port->port_lock);
usb_ep_fifo_flush(gser->out);
usb_ep_fifo_flush(gser->in);
spin_lock_irq(&port->port_lock);
gs_free_requests(gser->out, &port->read_queue, NULL);
gs_free_requests(gser->out, &port->read_pool, NULL);
gs_free_requests(gser->in, &port->write_pool, NULL);
}
port->read_allocated = port->read_started =
port->write_allocated = port->write_started = 0;
exit:
spin_unlock_irq(&port->port_lock);
}
static void gs_close(struct tty_struct *tty, struct file *file)
{
struct gs_port *port = tty->driver_data;
struct gserial *gser;
spin_lock_irq(&port->port_lock);
if (port->open_count != 1) {
if (port->open_count == 0)
WARN_ON(1);
else
--port->open_count;
goto exit;
}
pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
port->openclose = true;
port->open_count = 0;
gser = port->port_usb;
if (gser && gser->disconnect)
gser->disconnect(gser);
if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
spin_unlock_irq(&port->port_lock);
wait_event_interruptible_timeout(port->drain_wait,
gs_writes_finished(port),
GS_CLOSE_TIMEOUT * HZ);
spin_lock_irq(&port->port_lock);
gser = port->port_usb;
}
if (gser == NULL)
gs_buf_free(&port->port_write_buf);
else
gs_buf_clear(&port->port_write_buf);
tty->driver_data = NULL;
port->port_tty = NULL;
port->openclose = false;
pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
port->port_num, tty, file);
wake_up_interruptible(&port->close_wait);
if (port->port_usb) {
spin_unlock_irq(&port->port_lock);
usb_ep_fifo_flush(gser->out);
usb_ep_fifo_flush(gser->in);
spin_lock_irq(&port->port_lock);
gs_free_requests(gser->out, &port->read_queue, NULL);
gs_free_requests(gser->out, &port->read_pool, NULL);
gs_free_requests(gser->in, &port->write_pool, NULL);
}
port->read_allocated = port->read_started =
port->write_allocated = port->write_started = 0;
exit:
spin_unlock_irq(&port->port_lock);
}
