/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void ICACHE_FLASH_ATTR
user_init(void)
{
uart_init(BIT_RATE_115200, BIT_RATE_115200);
partition_item_t partition_item;
os_printf("SDK version:%s\n", system_get_sdk_version());
if (!system_partition_get_item(SYSTEM_PARTITION_CUSTOMER_PRIV_PARAM, &partition_item)) {
os_printf("Get partition information fail\n");
}
priv_param_start_sec = partition_item.addr/SPI_FLASH_SEC_SIZE;
#if ESP_PLATFORM
/*Initialization of the peripheral drivers*/
/*For light demo , it is user_light_init();*/
/* Also check whether assigned ip addr by the router.If so, connect to ESP-server */
user_esp_platform_init();
#endif
/*Establish a udp socket to receive local device detect info.*/
/*Listen to the port 1025, as well as udp broadcast.
/*If receive a string of device_find_request, it rely its IP address and MAC.*/
// user_devicefind_init();
/*Establish a TCP server for http(with JSON) POST or GET command to communicate with the device.*/
/*You can find the command in "2B-SDK-Espressif IoT Demo.pdf" to see the details.*/
/*the JSON command for curl is like:*/
/*3 Channel mode: curl -X POST -H "Content-Type:application/json" -d "{\"period\":1000,\"rgb\":{\"red\":16000,\"green\":16000,\"blue\":16000}}" http://192.168.4.1/config?command=light */
/*5 Channel mode: curl -X POST -H "Content-Type:application/json" -d "{\"period\":1000,\"rgb\":{\"red\":16000,\"green\":16000,\"blue\":16000,\"cwhite\":3000,\"wwhite\",3000}}" http://192.168.4.1/config?command=light */
#ifdef SERVER_SSL_ENABLE
//user_webserver_init(SERVER_SSL_PORT);
#else
//user_webserver_init(SERVER_PORT);
#endif
schedule_create(0);
}
void ICACHE_FLASH_ATTR data_func() {
// Read out the sensor data structure from RTC memory
system_rtc_mem_read( SENSOR_DATA_MEM_ADDR, &sensor_data, sizeof(SENSOR_DATA_RTC_MEM) );
// When the system powers on for the first time, the data in the rtc memory is random.
struct esp_platform_saved_param esp_param_t;
user_esp_platform_load_param(&esp_param_t); // Stored in flash
// Load user params to check if the device was successfully registered to the server
// If it wasn't, it usually returns 255 (from the flash.)
if(sensor_data.init_flg!=INIT_MAGIC || sensor_data.cnt>SENSOR_DATA_NUM ) {
// This case runs when we first power on or when it time to flush the RTC memory of old data.
if(esp_param_t.activeflag!=1) { // If registered & activated
user_esp_platform_init(); // Router is not configured. Setup softAP. Wait for config.
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
} else { // was connected! So we set init magic to exit the setup loop
sensor_data.init_flg = INIT_MAGIC;
sensor_data.cnt = 0;
system_rtc_mem_write(SENSOR_DATA_MEM_ADDR, &sensor_data, sizeof(SENSOR_DATA_RTC_MEM));
__SET__DEEP_SLEEP__WAKEUP_NO_RF__;
system_deep_sleep(100000);
}
} else { // This is where the measurements are made
uint16 vdd_val = 0;
if(sensor_data.cnt<0 || sensor_data.cnt>=SENSOR_DATA_NUM)
sensor_data.cnt=0; // range check and resets counter if needed
/* Reads power supply voltage, byte 107 of init_data.bin should be set to 0xFF.
* Replace with your own code.*/
sensor_data.data[sensor_data.cnt++] = (uint16)(phy_get_vdd33());
system_rtc_mem_write( SENSOR_DATA_MEM_ADDR, &sensor_data, sizeof(SENSOR_DATA_RTC_MEM) );
// Setup next sleep cycle
if(sensor_data.cnt==SENSOR_DATA_NUM-1) { __SET__DEEP_SLEEP__WAKEUP_NORMAL__; }
else { __SET__DEEP_SLEEP__WAKEUP_NO_RF__; }
// Uploads or go to sleep
if(sensor_data.cnt == SENSOR_DATA_NUM) { user_esp_platform_init(); }
else { system_deep_sleep(SENSOR_DEEP_SLEEP_TIME); }
}
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void user_init(void)
{
user_gpio_init();
uart_init(115200,115200);
//system_timer_reinit();
//wifi_set_sleep_type(MODEM_SLEEP_T);
os_printf("\n\nHFWiFiMode version:%s\n",HFWIFIMODE);
wifi_station_set_auto_connect(1);
user_esp_platform_init();
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void user_init(void)
{
#if ESP_PLATFORM
user_esp_platform_init();
#endif
user_devicefind_init();
user_webserver_init(SERVER_PORT);
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void user_init(void)
{
os_printf("SDK version:%s\n", system_get_sdk_version());
#if ESP_PLATFORM
user_esp_platform_init();
#endif
user_devicefind_init();
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void user_init(void)
{
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_printf("SDK version:%d.%d.%d\r\n", SDK_VERSION_MAJOR, SDK_VERSION_MINOR, SDK_VERSION_REVISION);
#if ESP_PLATFORM
user_esp_platform_init();
#endif
user_devicefind_init();
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void user_init(void)
{
uart_init(115200, 115200);
UART_SetPrintPort(0);
os_printf("init start, SDK version:%s\n", system_get_sdk_version());
os_sprintf("vicly rom 20150109001");
//Set softAP + station mode
wifi_set_opmode(STATIONAP_MODE);
// ESP8266 connect to router.
user_set_station_config();
/*
static os_timer_t myuart_test_timer;
os_timer_disarm(&myuart_test_timer);
//os_timer_setfn(&myuart_test_timer, (os_timer_func_t *)vtest_uart, NULL);
os_sprintf("os_sprintf:vicly test os time...;;");
PRINTF("timer:PRINTF:uart0_sendStr q1 ... \n");
os_timer_arm(&myuart_test_timer, 15000, 1); //call set_usart_gpu_content 15sec each
*/
/*
//---------------smart config------------------s
// os_printf("SDK version:%s\n", system_get_sdk_version());
///smartconfig_set_type(SC_TYPE_ESPTOUCH); //SC_TYPE_ESPTOUCH,SC_TYPE_AIRKISS,SC_TYPE_ESPTOUCH_AIRKISS
//smartconfig_set_type(SC_TYPE_AIRKISS); //SC_TYPE_ESPTOUCH,SC_TYPE_AIRKISS,SC_TYPE_ESPTOUCH_AIRKISS
smartconfig_set_type(SC_TYPE_ESPTOUCH); //SC_TYPE_ESPTOUCH,SC_TYPE_AIRKISS,SC_TYPE_ESPTOUCH_AIRKISS
wifi_set_opmode(STATION_MODE);
smartconfig_start(smartconfig_done);
//---------------smart config------------------e
*/
///#if ESP_PLATFORM
/*Initialization of the peripheral drivers*/
/*For light demo , it is user_light_init();*/
/* Also check whether assigned ip addr by the router.If so, connect to ESP-server */
/// user_esp_platform_init();
///#endif
/*Establish a udp socket to receive local device detect info.*/
/*Listen to the port 1025, as well as udp broadcast.
/*If receive a string of device_find_request, it rely its IP address and MAC.*/
/// user_devicefind_init();
user_esp_platform_init();
/// v_user_esp_platform_init();
/*Establish a TCP server for http(with JSON) POST or GET command to communicate with the device.*/
/*You can find the command in "2B-SDK-Espressif IoT Demo.pdf" to see the details.*/
/*the JSON command for curl is like:*/
/*3 Channel mode: curl -X POST -H "Content-Type:application/json" -d "{\"period\":1000,\"rgb\":{\"red\":16000,\"green\":16000,\"blue\":16000}}" http://192.168.4.1/config?command=light */
/*5 Channel mode: curl -X POST -H "Content-Type:application/json" -d "{\"period\":1000,\"rgb\":{\"red\":16000,\"green\":16000,\"blue\":16000,\"cwhite\":3000,\"wwhite\",3000}}" http://192.168.4.1/config?command=light */
/*
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
*/
}