/*
* si4713_powerdown - Powers the device down
* @sdev: si4713_device structure for the device we are communicating
*/
static int si4713_powerdown(struct si4713_device *sdev)
{
int err;
u8 resp[SI4713_PWDN_NRESP];
if (!sdev->power_state)
return 0;
err = si4713_send_command(sdev, SI4713_CMD_POWER_DOWN,
NULL, 0,
resp, ARRAY_SIZE(resp),
DEFAULT_TIMEOUT);
if (!err) {
v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
resp[0]);
v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
if (gpio_is_valid(sdev->gpio_reset))
gpio_set_value(sdev->gpio_reset, 0);
err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
sdev->supplies);
if (err)
v4l2_err(&sdev->sd,
"Failed to disable supplies: %d\n", err);
sdev->power_state = POWER_OFF;
}
return err;
}
static int sensor_subdev_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
struct sensor_info *info = to_sensor(sd);
int ret = 0;
struct platform_device *pdev;
int irq = 0;
v4l2_dbg(1, sensor_debug, sd, "%s", __func__);
ret = sensor_set_clock(sd, FLITE_ID_C);
if (ret < 0) {
sensor_err("sensor set clock fail");
return ret;
}
ret = sensor_init_controls(info);
if (ret < 0) {
sensor_err("sensor init contols fail");
return ret;
}
fh->vfh.ctrl_handler = &info->handle;
sensor_init_formats(sd, fh);
pdev = get_mipi_csis_pdev(FLITE_ID_C);
irq = platform_get_irq(pdev, 0);
v4l2_dbg(1, sensor_debug, sd, "%s : mipi irq num : %d", __func__, irq);
enable_irq(irq);
return 0;
}
static void m5mols_irq_work(struct work_struct *work)
{
struct m5mols_info *info =
container_of(work, struct m5mols_info, work_irq);
struct v4l2_subdev *sd = &info->sd;
u8 reg;
int ret;
if (!is_powered(info) ||
m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &info->interrupt))
return;
switch (info->interrupt & REG_INT_MASK) {
case REG_INT_AF:
if (!is_available_af(info))
break;
ret = m5mols_read_u8(sd, AF_STATUS, ®);
v4l2_dbg(2, m5mols_debug, sd, "AF %s\n",
reg == REG_AF_FAIL ? "Failed" :
reg == REG_AF_SUCCESS ? "Success" :
reg == REG_AF_IDLE ? "Idle" : "Busy");
break;
case REG_INT_CAPTURE:
if (!test_and_set_bit(ST_CAPT_IRQ, &info->flags))
wake_up_interruptible(&info->irq_waitq);
v4l2_dbg(2, m5mols_debug, sd, "CAPTURE\n");
break;
default:
v4l2_dbg(2, m5mols_debug, sd, "Undefined: %02x\n", reg);
break;
};
}
static int ths7303_setvalue(struct v4l2_subdev *sd, v4l2_std_id std)
{
int err = 0;
u8 val;
struct i2c_client *client;
client = v4l2_get_subdevdata(sd);
if (std & (V4L2_STD_ALL & ~V4L2_STD_SECAM)) {
val = 0x02;
v4l2_dbg(1, debug, sd, "setting value for SDTV format\n");
} else {
val = 0x00;
v4l2_dbg(1, debug, sd, "disabling all channels\n");
}
err |= i2c_smbus_write_byte_data(client, 0x01, val);
err |= i2c_smbus_write_byte_data(client, 0x02, val);
err |= i2c_smbus_write_byte_data(client, 0x03, val);
if (err)
v4l2_err(sd, "write failed\n");
return err;
}
/*
* si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
* tx_tune_power commands. This command return the current
* frequency, output voltage in dBuV, the antenna tunning
* capacitance value and the received noise level. The
* command also clears the stcint interrupt bit when the
* first bit of its arguments is high.
* @sdev: si4713_device structure for the device we are communicating
* @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
* @frequency: returned frequency
* @power: returned power
* @antcap: returned antenna capacitance
* @noise: returned noise level
*/
static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
u16 *frequency, u8 *power,
u8 *antcap, u8 *noise)
{
int err;
u8 val[SI4713_TXSTATUS_NRESP];
/*
* .First byte = intack bit
*/
const u8 args[SI4713_TXSTATUS_NARGS] = {
intack & SI4713_INTACK_MASK,
};
err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_STATUS,
args, ARRAY_SIZE(args), val,
ARRAY_SIZE(val), DEFAULT_TIMEOUT);
if (!err) {
v4l2_dbg(1, debug, &sdev->sd,
"%s: status=0x%02x\n", __func__, val[0]);
*frequency = compose_u16(val[2], val[3]);
sdev->frequency = *frequency;
*power = val[5];
*antcap = val[6];
*noise = val[7];
v4l2_dbg(1, debug, &sdev->sd, "%s: response: %d x 10 kHz "
"(power %d, antcap %d, rnl %d)\n", __func__,
*frequency, *power, *antcap, *noise);
}
return err;
}
/*
* si4713_tx_rds_buff - Loads the RDS group buffer FIFO or circular buffer.
* @sdev: si4713_device structure for the device we are communicating
* @mode: the buffer operation mode.
* @rdsb: RDS Block B
* @rdsc: RDS Block C
* @rdsd: RDS Block D
* @cbleft: returns the number of available circular buffer blocks minus the
* number of used circular buffer blocks.
*/
static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb,
u16 rdsc, u16 rdsd, s8 *cbleft)
{
int err;
u8 val[SI4713_RDSBUFF_NRESP];
const u8 args[SI4713_RDSBUFF_NARGS] = {
mode & SI4713_RDSBUFF_MODE_MASK,
msb(rdsb),
lsb(rdsb),
msb(rdsc),
lsb(rdsc),
msb(rdsd),
lsb(rdsd),
};
err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_BUFF,
args, ARRAY_SIZE(args), val,
ARRAY_SIZE(val), DEFAULT_TIMEOUT);
if (!err) {
v4l2_dbg(1, debug, &sdev->sd,
"%s: status=0x%02x\n", __func__, val[0]);
*cbleft = (s8)val[2] - val[3];
v4l2_dbg(1, debug, &sdev->sd, "%s: response: interrupts"
" 0x%02x cb avail: %d cb used %d fifo avail"
" %d fifo used %d\n", __func__, val[1],
val[2], val[3], val[4], val[5]);
}
return err;
}
/* Receiver */
static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
ssize_t *num)
{
struct cx25840_ir_state *ir_state = to_ir_state(sd);
bool invert;
u16 divider;
unsigned int i, n;
union cx25840_ir_fifo_rec *p;
unsigned u, v, w;
if (ir_state == NULL)
return -ENODEV;
invert = (bool) atomic_read(&ir_state->rx_invert);
divider = (u16) atomic_read(&ir_state->rxclk_divider);
n = count / sizeof(union cx25840_ir_fifo_rec)
* sizeof(union cx25840_ir_fifo_rec);
if (n == 0) {
*num = 0;
return 0;
}
n = kfifo_out_locked(&ir_state->rx_kfifo, buf, n,
&ir_state->rx_kfifo_lock);
n /= sizeof(union cx25840_ir_fifo_rec);
*num = n * sizeof(union cx25840_ir_fifo_rec);
for (p = (union cx25840_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
/* Assume RTO was because of no IR light input */
u = 0;
w = 1;
} else {
u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
if (invert)
u = u ? 0 : 1;
w = 0;
}
v = (unsigned) pulse_width_count_to_ns(
(u16) (p->hw_fifo_data & FIFO_RXTX), divider);
if (v > IR_MAX_DURATION)
v = IR_MAX_DURATION;
init_ir_raw_event(&p->ir_core_data);
p->ir_core_data.pulse = u;
p->ir_core_data.duration = v;
p->ir_core_data.timeout = w;
v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns %s %s\n",
v, u ? "mark" : "space", w ? "(timed out)" : "");
if (w)
v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
}
return 0;
}
/*
* si4713_powerup - Powers the device up
* @sdev: si4713_device structure for the device we are communicating
*/
static int si4713_powerup(struct si4713_device *sdev)
{
int err;
u8 resp[SI4713_PWUP_NRESP];
/*
* .First byte = Enabled interrupts and boot function
* .Second byte = Input operation mode
*/
const u8 args[SI4713_PWUP_NARGS] = {
SI4713_PWUP_CTSIEN | SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
SI4713_PWUP_OPMOD_ANALOG,
};
if (sdev->power_state)
return 0;
err = regulator_bulk_enable(ARRAY_SIZE(sdev->supplies),
sdev->supplies);
if (err) {
v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err);
return err;
}
if (gpio_is_valid(sdev->gpio_reset)) {
udelay(50);
gpio_set_value(sdev->gpio_reset, 1);
}
err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
args, ARRAY_SIZE(args),
resp, ARRAY_SIZE(resp),
TIMEOUT_POWER_UP);
if (!err) {
v4l2_dbg(1, debug, &sdev->sd, "Powerup response: 0x%02x\n",
resp[0]);
v4l2_dbg(1, debug, &sdev->sd, "Device in power up mode\n");
sdev->power_state = POWER_ON;
err = si4713_write_property(sdev, SI4713_GPO_IEN,
SI4713_STC_INT | SI4713_CTS);
} else {
if (gpio_is_valid(sdev->gpio_reset))
gpio_set_value(sdev->gpio_reset, 0);
err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
sdev->supplies);
if (err)
v4l2_err(&sdev->sd,
"Failed to disable supplies: %d\n", err);
}
return err;
}
/* Receiver */
static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
ssize_t *num)
{
struct cx23888_ir_state *state = to_state(sd);
bool invert = (bool) atomic_read(&state->rx_invert);
u16 divider = (u16) atomic_read(&state->rxclk_divider);
unsigned int i, n;
u32 *p;
u32 u, v;
n = count / sizeof(u32) * sizeof(u32);
if (n == 0) {
*num = 0;
return 0;
}
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 33)
n = kfifo_get(state->rx_kfifo, buf, n);
#else
n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock);
#endif
n /= sizeof(u32);
*num = n * sizeof(u32);
for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
*p = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
continue;
}
u = (*p & FIFO_RXTX_LVL) ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
if (invert)
u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
divider);
if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
v = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS - 1;
*p = u | v;
v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s\n",
v, u ? "mark" : "space");
}
return 0;
}
static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data)
{
struct mt9v011 *core = to_mt9v011(sd);
unsigned *xtal = data;
v4l2_dbg(1, debug, sd, "s_config called\n");
if (xtal) {
core->xtal = *xtal;
v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
*xtal / 1000000, (*xtal / 1000) % 1000);
}
return 0;
}
/*
* si4713_tx_tune_power - Sets the RF voltage level between 88 and 115 dBuV in
* 1 dB units. A value of 0x00 indicates off. The command
* also sets the antenna tuning capacitance. A value of 0
* indicates autotuning, and a value of 1 - 191 indicates
* a manual override, which results in a tuning
* capacitance of 0.25 pF x @antcap.
* @sdev: si4713_device structure for the device we are communicating
* @power: tuning power (88 - 115 dBuV, unit/step 1 dB)
* @antcap: value of antenna tuning capacitor (0 - 191)
*/
static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
u8 antcap)
{
int err;
u8 val[SI4713_TXPWR_NRESP];
/*
* .First byte = 0
* .Second byte = 0
* .Third byte = power
* .Fourth byte = antcap
*/
const u8 args[SI4713_TXPWR_NARGS] = {
0x00,
0x00,
power,
antcap,
};
if (((power > 0) && (power < SI4713_MIN_POWER)) ||
power > SI4713_MAX_POWER || antcap > SI4713_MAX_ANTCAP)
return -EDOM;
err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER,
args, ARRAY_SIZE(args), val,
ARRAY_SIZE(val), DEFAULT_TIMEOUT);
if (err < 0)
return err;
v4l2_dbg(1, debug, &sdev->sd,
"%s: power=0x%02x antcap=0x%02x status=0x%02x\n",
__func__, power, antcap, val[0]);
return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER);
}
static int tda9840_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *t)
{
int stat = tda9840_status(sd);
int byte;
if (t->index)
return -EINVAL;
stat = stat < 0 ? 0 : stat;
if (stat == 0 || stat == 0x60) /* mono input */
byte = TDA9840_SET_MONO;
else if (stat == 0x40) /* stereo input */
byte = (t->audmode == V4L2_TUNER_MODE_MONO) ?
TDA9840_SET_MONO : TDA9840_SET_STEREO;
else { /* bilingual */
switch (t->audmode) {
case V4L2_TUNER_MODE_LANG1_LANG2:
byte = TDA9840_SET_BOTH;
break;
case V4L2_TUNER_MODE_LANG2:
byte = TDA9840_SET_LANG2;
break;
default:
byte = TDA9840_SET_LANG1;
break;
}
}
v4l2_dbg(1, debug, sd, "TDA9840_SWITCH: 0x%02x\n", byte);
tda9840_write(sd, SWITCH, byte);
return 0;
}
/**
* m5mols_fw_start - M-5MOLS internal ARM controller initialization
*
* Execute the M-5MOLS internal ARM controller initialization sequence.
* This function should be called after the supply voltage has been
* applied and before any requests to the device are made.
*/
static int m5mols_fw_start(struct v4l2_subdev *sd)
{
struct m5mols_info *info = to_m5mols(sd);
int ret;
atomic_set(&info->irq_done, 0);
/* Wait until I2C slave is initialized in Flash Writer mode */
ret = m5mols_busy_wait(sd, FLASH_CAM_START, REG_IN_FLASH_MODE,
M5MOLS_I2C_RDY_WAIT_FL | 0xff, -1);
if (!ret)
ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT);
if (!ret)
ret = m5mols_wait_interrupt(sd, REG_INT_MODE, 2000);
if (ret < 0)
return ret;
info->isp_ready = 1;
ret = m5mols_get_version(sd);
if (!ret)
ret = m5mols_update_fw(sd, m5mols_sensor_power);
if (ret)
return ret;
v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n");
ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI);
if (!ret)
ret = m5mols_enable_interrupt(sd,
REG_INT_AF | REG_INT_CAPTURE);
return ret;
}
/*
* si4713_read_property - reads a si4713 property
* @sdev: si4713_device structure for the device we are communicating
* @prop: property identification number
* @pv: property value to be returned on success
*/
static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv)
{
int err;
u8 val[SI4713_GET_PROP_NRESP];
/*
* .First byte = 0
* .Second byte = property's MSB
* .Third byte = property's LSB
*/
const u8 args[SI4713_GET_PROP_NARGS] = {
0x00,
msb(prop),
lsb(prop),
};
err = si4713_send_command(sdev, SI4713_CMD_GET_PROPERTY,
args, ARRAY_SIZE(args), val,
ARRAY_SIZE(val), DEFAULT_TIMEOUT);
if (err < 0)
return err;
*pv = compose_u16(val[2], val[3]);
v4l2_dbg(1, debug, &sdev->sd,
"%s: property=0x%02x value=0x%02x status=0x%02x\n",
__func__, prop, *pv, val[0]);
return err;
}
/*
* si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in
* 1 dB units. A value of 0x00 indicates off. The command
* also sets the antenna tuning capacitance. A value of 0
* indicates autotuning, and a value of 1 - 191 indicates
* a manual override, which results in a tuning
* capacitance of 0.25 pF x @antcap.
* @sdev: si4713_device structure for the device we are communicating
* @power: tuning power (88 - 120 dBuV, unit/step 1 dB)
* @antcap: value of antenna tuning capacitor (0 - 191)
*/
static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
u8 antcap)
{
int err;
u8 val[SI4713_TXPWR_NRESP];
/*
* .First byte = 0
* .Second byte = 0
* .Third byte = power
* .Fourth byte = antcap
*/
u8 args[SI4713_TXPWR_NARGS] = {
0x00,
0x00,
power,
antcap,
};
/* Map power values 1-87 to MIN_POWER (88) */
if (power > 0 && power < SI4713_MIN_POWER)
args[2] = power = SI4713_MIN_POWER;
err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER,
args, ARRAY_SIZE(args), val,
ARRAY_SIZE(val), DEFAULT_TIMEOUT);
if (err < 0)
return err;
v4l2_dbg(1, debug, &sdev->sd,
"%s: power=0x%02x antcap=0x%02x status=0x%02x\n",
__func__, power, antcap, val[0]);
return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER);
}
static int vpbe_buffer_prepare(struct videobuf_queue *q,
struct videobuf_buffer *vb,
enum v4l2_field field)
{
struct vpbe_fh *fh = q->priv_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
unsigned long addr;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"vpbe_buffer_prepare\n");
if (VIDEOBUF_NEEDS_INIT == vb->state) {
vb->width = layer->pix_fmt.width;
vb->height = layer->pix_fmt.height;
vb->size = layer->pix_fmt.sizeimage;
vb->field = field;
ret = videobuf_iolock(q, vb, NULL);
if (ret < 0) {
v4l2_err(&vpbe_dev->v4l2_dev, "Failed to map \
user address\n");
return -EINVAL;
}
static int tda9840_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *t)
{
int byte;
if (t->index)
return -EINVAL;
switch (t->audmode) {
case V4L2_TUNER_MODE_STEREO:
byte = TDA9840_SET_STEREO;
break;
case V4L2_TUNER_MODE_LANG1_LANG2:
byte = TDA9840_SET_BOTH;
break;
case V4L2_TUNER_MODE_LANG1:
byte = TDA9840_SET_LANG1;
break;
case V4L2_TUNER_MODE_LANG2:
byte = TDA9840_SET_LANG2;
break;
default:
byte = TDA9840_SET_MONO;
break;
}
v4l2_dbg(1, debug, sd, "TDA9840_SWITCH: 0x%02x\n", byte);
tda9840_write(sd, SWITCH, byte);
return 0;
}
static int tda9840_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct v4l2_subdev *sd;
int result;
int byte;
/* let's see whether this adapter can support what we need */
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA |
I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EIO;
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
if (sd == NULL)
return -ENOMEM;
v4l2_i2c_subdev_init(sd, client, &tda9840_ops);
/* set initial values for level & stereo - adjustment, mode */
byte = 0;
result = tda9840_ioctl(sd, TDA9840_LEVEL_ADJUST, &byte);
result |= tda9840_ioctl(sd, TDA9840_STEREO_ADJUST, &byte);
tda9840_write(sd, SWITCH, TDA9840_SET_STEREO);
if (result) {
v4l2_dbg(1, debug, sd, "could not initialize tda9840\n");
kfree(sd);
return -ENODEV;
}
return 0;
}
int get_input_lines_info(struct hdpvr_device *dev)
{
#ifdef HDPVR_DEBUG
char print_buf[9];
#endif
int ret, lines;
mutex_lock(&dev->usbc_mutex);
ret = usb_control_msg(dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
0x81, 0x80 | 0x38,
0x1800, 0x0003,
dev->usbc_buf, 3,
1000);
#ifdef HDPVR_DEBUG
if (hdpvr_debug & MSG_INFO) {
hex_dump_to_buffer(dev->usbc_buf, 3, 16, 1, print_buf,
sizeof(print_buf), 0);
v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
"get input lines info returned: %d, %s\n", ret,
print_buf);
}
#endif
lines = dev->usbc_buf[1] << 8 | dev->usbc_buf[0];
mutex_unlock(&dev->usbc_mutex);
return lines;
}
/*
* si4713_wait_stc - Waits STC interrupt and clears status bits. Useful
* for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
* @sdev: si4713_device structure for the device we are communicating
* @usecs: timeout to wait for STC interrupt signal
*/
static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
{
int err;
u8 resp[SI4713_GET_STATUS_NRESP];
/* Wait response from STC interrupt */
if (!wait_for_completion_timeout(&sdev->work,
usecs_to_jiffies(usecs) + 1))
v4l2_warn(&sdev->sd,
"%s: device took too much time to answer (%d usec).\n",
__func__, usecs);
/* Clear status bits */
err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS,
NULL, 0,
resp, ARRAY_SIZE(resp),
DEFAULT_TIMEOUT);
if (err < 0)
goto exit;
v4l2_dbg(1, debug, &sdev->sd,
"%s: status bits: 0x%02x\n", __func__, resp[0]);
if (!(resp[0] & SI4713_STC_INT))
err = -EIO;
exit:
return err;
}
/*
* si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
* frequency between 76 and 108 MHz in 10 kHz units and
* steps of 50 kHz.
* @sdev: si4713_device structure for the device we are communicating
* @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
*/
static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
{
int err;
u8 val[SI4713_TXFREQ_NRESP];
/*
* .First byte = 0
* .Second byte = frequency's MSB
* .Third byte = frequency's LSB
*/
const u8 args[SI4713_TXFREQ_NARGS] = {
0x00,
msb(frequency),
lsb(frequency),
};
err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_FREQ,
args, ARRAY_SIZE(args), val,
ARRAY_SIZE(val), DEFAULT_TIMEOUT);
if (err < 0)
return err;
v4l2_dbg(1, debug, &sdev->sd,
"%s: frequency=0x%02x status=0x%02x\n", __func__,
frequency, val[0]);
err = si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
if (err < 0)
return err;
return compose_u16(args[1], args[2]);
}
/*
* si4713_tx_rds_ps - Loads the program service buffer.
* @sdev: si4713_device structure for the device we are communicating
* @psid: program service id to be loaded.
* @pschar: assumed 4 size char array to be loaded into the program service
*/
static int si4713_tx_rds_ps(struct si4713_device *sdev, u8 psid,
unsigned char *pschar)
{
int err;
u8 val[SI4713_RDSPS_NRESP];
const u8 args[SI4713_RDSPS_NARGS] = {
psid & SI4713_RDSPS_PSID_MASK,
pschar[0],
pschar[1],
pschar[2],
pschar[3],
};
err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_PS,
args, ARRAY_SIZE(args), val,
ARRAY_SIZE(val), DEFAULT_TIMEOUT);
if (err < 0)
return err;
v4l2_dbg(1, debug, &sdev->sd, "%s: status=0x%02x\n", __func__, val[0]);
return err;
}
static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct mt9v011 *core = to_mt9v011(sd);
v4l2_dbg(1, debug, sd, "g_ctrl called\n");
switch (ctrl->id) {
case V4L2_CID_GAIN:
ctrl->value = core->global_gain;
return 0;
case V4L2_CID_EXPOSURE:
ctrl->value = core->exposure;
return 0;
case V4L2_CID_RED_BALANCE:
ctrl->value = core->red_bal;
return 0;
case V4L2_CID_BLUE_BALANCE:
ctrl->value = core->blue_bal;
return 0;
case V4L2_CID_HFLIP:
ctrl->value = core->hflip ? 1 : 0;
return 0;
case V4L2_CID_VFLIP:
ctrl->value = core->vflip ? 1 : 0;
return 0;
}
return -EINVAL;
}
static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
{
struct mt9v011 *core = to_mt9v011(sd);
unsigned height, width, hblank, vblank, speed;
unsigned row_time, t_time;
u64 frames_per_ms;
unsigned tmp;
height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
width = mt9v011_read(sd, R04_MT9V011_WIDTH);
hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
row_time = (width + 113 + hblank) * (speed + 2);
t_time = row_time * (height + vblank + 1);
frames_per_ms = core->xtal * 1000l;
do_div(frames_per_ms, t_time);
tmp = frames_per_ms;
v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
tmp / 1000, tmp % 1000, t_time);
if (numerator && denominator) {
*numerator = 1000;
*denominator = (u32)frames_per_ms;
}
}
int get_video_info(struct hdpvr_device *dev, struct hdpvr_video_info *vidinf)
{
int ret;
vidinf->valid = false;
mutex_lock(&dev->usbc_mutex);
ret = usb_control_msg(dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
0x81, 0x80 | 0x38,
0x1400, 0x0003,
dev->usbc_buf, 5,
1000);
#ifdef HDPVR_DEBUG
if (hdpvr_debug & MSG_INFO)
v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
"get video info returned: %d, %5ph\n", ret,
dev->usbc_buf);
#endif
mutex_unlock(&dev->usbc_mutex);
if (ret < 0)
return ret;
vidinf->width = dev->usbc_buf[1] << 8 | dev->usbc_buf[0];
vidinf->height = dev->usbc_buf[3] << 8 | dev->usbc_buf[2];
vidinf->fps = dev->usbc_buf[4];
vidinf->valid = vidinf->width && vidinf->height && vidinf->fps;
return 0;
}
static void __configure_output(struct atomisp_sub_device *isp_subdev,
unsigned int width,
unsigned int height,
enum ia_css_frame_format format,
enum ia_css_pipe_id pipe_id)
{
isp_subdev->css2_basis.curr_pipe = pipe_id;
isp_subdev->css2_basis.pipe_configs[pipe_id].mode =
__pipe_id_to_pipe_mode(pipe_id);
isp_subdev->css2_basis.update_pipe[pipe_id] = true;
isp_subdev->css2_basis.pipe_configs[pipe_id].
output_info.res.width = width;
isp_subdev->css2_basis.pipe_configs[pipe_id].
output_info.res.height = height;
isp_subdev->css2_basis.pipe_configs[pipe_id].
output_info.format = format;
if (width * height >
isp_subdev->css2_basis.stream_config.
effective_res.width *
isp_subdev->css2_basis.stream_config.
effective_res.height) {
isp_subdev->css2_basis.stream_config.
effective_res.width = width;
isp_subdev->css2_basis.stream_config.
effective_res.height = height;
}
v4l2_dbg(3, dbg_level, &atomisp_dev,
"configuring pipe[%d] output info w=%d.h=%d.f=%d.\n",
pipe_id, width, height, format);
}
static const struct fimc_fmt *fimc_lite_try_format(struct fimc_lite *fimc,
u32 *width, u32 *height,
u32 *code, u32 *fourcc, int pad)
{
struct flite_variant *variant = fimc->variant;
const struct fimc_fmt *fmt;
fmt = fimc_lite_find_format(fourcc, code, 0);
if (WARN_ON(!fmt))
return NULL;
if (code)
*code = fmt->mbus_code;
if (fourcc)
*fourcc = fmt->fourcc;
if (pad == FLITE_SD_PAD_SINK) {
v4l_bound_align_image(width, 8, variant->max_width,
ffs(variant->out_width_align) - 1,
height, 0, variant->max_height, 0, 0);
} else {
v4l_bound_align_image(width, 8, fimc->inp_frame.rect.width,
ffs(variant->out_width_align) - 1,
height, 0, fimc->inp_frame.rect.height,
0, 0);
}
v4l2_dbg(1, debug, &fimc->subdev, "code: 0x%x, %dx%d\n",
code ? *code : 0, *width, *height);
return fmt;
}
static int fimc_lite_subdev_set_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_fh *fh,
struct v4l2_subdev_selection *sel)
{
struct fimc_lite *fimc = v4l2_get_subdevdata(sd);
struct flite_frame *f = &fimc->inp_frame;
int ret = 0;
if (sel->target != V4L2_SEL_TGT_CROP || sel->pad != FLITE_SD_PAD_SINK)
return -EINVAL;
mutex_lock(&fimc->lock);
fimc_lite_try_crop(fimc, &sel->r);
if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
*v4l2_subdev_get_try_crop(fh, sel->pad) = sel->r;
} else {
unsigned long flags;
spin_lock_irqsave(&fimc->slock, flags);
f->rect = sel->r;
/* Same crop rectangle on the source pad */
fimc->out_frame.rect = sel->r;
set_bit(ST_FLITE_CONFIG, &fimc->state);
spin_unlock_irqrestore(&fimc->slock, flags);
}
mutex_unlock(&fimc->lock);
v4l2_dbg(1, debug, sd, "%s: (%d,%d) %dx%d, f_w: %d, f_h: %d",
__func__, f->rect.left, f->rect.top, f->rect.width,
f->rect.height, f->f_width, f->f_height);
return ret;
}
static int fimc_lite_subdev_get_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_fh *fh,
struct v4l2_subdev_selection *sel)
{
struct fimc_lite *fimc = v4l2_get_subdevdata(sd);
struct flite_frame *f = &fimc->inp_frame;
if ((sel->target != V4L2_SEL_TGT_CROP &&
sel->target != V4L2_SEL_TGT_CROP_BOUNDS) ||
sel->pad != FLITE_SD_PAD_SINK)
return -EINVAL;
if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
sel->r = *v4l2_subdev_get_try_crop(fh, sel->pad);
return 0;
}
mutex_lock(&fimc->lock);
if (sel->target == V4L2_SEL_TGT_CROP) {
sel->r = f->rect;
} else {
sel->r.left = 0;
sel->r.top = 0;
sel->r.width = f->f_width;
sel->r.height = f->f_height;
}
mutex_unlock(&fimc->lock);
v4l2_dbg(1, debug, sd, "%s: (%d,%d) %dx%d, f_w: %d, f_h: %d",
__func__, f->rect.left, f->rect.top, f->rect.width,
f->rect.height, f->f_width, f->f_height);
return 0;
}
/* Capture subdev media entity operations */
static int fimc_lite_link_setup(struct media_entity *entity,
const struct media_pad *local,
const struct media_pad *remote, u32 flags)
{
struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
struct fimc_lite *fimc = v4l2_get_subdevdata(sd);
unsigned int remote_ent_type = media_entity_type(remote->entity);
int ret = 0;
if (WARN_ON(fimc == NULL))
return 0;
v4l2_dbg(1, debug, sd, "%s: %s --> %s, flags: 0x%x. source_id: 0x%x\n",
__func__, remote->entity->name, local->entity->name,
flags, fimc->source_subdev_grp_id);
switch (local->index) {
case FLITE_SD_PAD_SINK:
if (remote_ent_type != MEDIA_ENT_T_V4L2_SUBDEV) {
ret = -EINVAL;
break;
}
if (flags & MEDIA_LNK_FL_ENABLED) {
if (fimc->source_subdev_grp_id == 0)
fimc->source_subdev_grp_id = sd->grp_id;
else
ret = -EBUSY;
} else {
fimc->source_subdev_grp_id = 0;
fimc->sensor = NULL;
}
break;
case FLITE_SD_PAD_SOURCE_DMA:
if (!(flags & MEDIA_LNK_FL_ENABLED))
atomic_set(&fimc->out_path, FIMC_IO_NONE);
else if (remote_ent_type == MEDIA_ENT_T_DEVNODE)
atomic_set(&fimc->out_path, FIMC_IO_DMA);
else
ret = -EINVAL;
break;
case FLITE_SD_PAD_SOURCE_ISP:
if (!(flags & MEDIA_LNK_FL_ENABLED))
atomic_set(&fimc->out_path, FIMC_IO_NONE);
else if (remote_ent_type == MEDIA_ENT_T_V4L2_SUBDEV)
atomic_set(&fimc->out_path, FIMC_IO_ISP);
else
ret = -EINVAL;
break;
default:
v4l2_err(sd, "Invalid pad index\n");
ret = -EINVAL;
}
mb();
return ret;
}
