void main_full( void )
{
/* This demo sets the clock to its maximum. The blinky demo uses as slower
clock as it uses low power features. */
prvConfigureClocks();
/* Init the serial port for use by the CLI. The baud rate parameter is not
used so set to 0 to make this obvious. */
xSerialPortInitMinimal( 0, mainRX_QUEUE_LENGTH );
/* Start all the other standard demo/test tasks. They have no particular
functionality, but do demonstrate how to use the FreeRTOS API and test the
kernel port. */
vStartInterruptQueueTasks();
vStartCountingSemaphoreTasks();
vStartGenericQueueTasks( tskIDLE_PRIORITY );
vStartRecursiveMutexTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartEventGroupTasks();
vStartTaskNotifyTask();
vStartInterruptSemaphoreTasks();
/* Note - the set of standard demo tasks contains two versions of
vStartMathTasks.c. One is defined in flop.c, and uses double precision
floating point numbers and variables. The other is defined in sp_flop.c,
and uses single precision floating point numbers and variables. sp_flop.
c should be included in this project. */
vStartMathTasks( mainFLOP_TASK_PRIORITY );
/* Start the tasks that implements the command console on the UART, as
described above. */
vUARTCommandConsoleStart( mainUART_COMMAND_CONSOLE_STACK_SIZE, mainUART_COMMAND_CONSOLE_TASK_PRIORITY );
/* Register the standard CLI commands. */
vRegisterSampleCLICommands();
/* Create the register check tasks, as described at the top of this file */
xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL );
/* Create the task that performs the 'check' functionality, as described at
the top of this file. */
xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* Start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following
line will never be reached. If the following line does execute, then
there was either insufficient FreeRTOS heap memory available for the idle
and/or timer tasks to be created, or vTaskStartScheduler() was called from
User mode. See the memory management section on the FreeRTOS web site for
more details on the FreeRTOS heap http://www.freertos.org/a00111.html. The
mode from which main() is called is set in the C start up code and must be
a privileged mode (not user mode). */
for( ;; );
}
int main_full( void )
{
/* Start the check task as described at the top of this file. */
xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* Create the standard demo tasks. */
vStartTaskNotifyTask();
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartMathTasks( mainFLOP_TASK_PRIORITY );
vStartRecursiveMutexTasks();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartQueueSetTasks();
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_PRIORITY );
vStartEventGroupTasks();
vStartInterruptSemaphoreTasks();
vStartQueueSetPollingTask();
vCreateBlockTimeTasks();
vCreateAbortDelayTasks();
xTaskCreate( prvDemoQueueSpaceFunctions, "QSpace", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvPermanentlyBlockingSemaphoreTask, "BlockSem", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvPermanentlyBlockingNotificationTask, "BlockNoti", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
{
vStartStaticallyAllocatedTasks();
}
#endif
#if( configUSE_PREEMPTION != 0 )
{
/* Don't expect these tasks to pass when preemption is not used. */
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
}
#endif
/* The suicide tasks must be created last as they need to know how many
tasks were running prior to their creation. This then allows them to
ascertain whether or not the correct/expected number of tasks are running at
any given time. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Create the semaphore that will be deleted in the idle task hook. This
is done purely to test the use of vSemaphoreDelete(). */
xMutexToDelete = xSemaphoreCreateMutex();
/* Start the scheduler itself. */
vTaskStartScheduler();
/* Should never get here unless there was not enough heap space to create
the idle and other system tasks. */
return 0;
}
void main_full( void )
{
/* Start all the other standard demo/test tasks. They have no particular
functionality, but do demonstrate how to use the FreeRTOS API and test the
kernel port. */
vStartDynamicPriorityTasks();
vCreateBlockTimeTasks();
vStartCountingSemaphoreTasks();
vStartGenericQueueTasks( tskIDLE_PRIORITY );
vStartRecursiveMutexTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartEventGroupTasks();
vStartTaskNotifyTask();
vStartInterruptSemaphoreTasks();
/* Note - the set of standard demo tasks contains two versions of
vStartMathTasks.c. One is defined in flop.c, and uses double precision
floating point numbers and variables. The other is defined in sp_flop.c,
and uses single precision floating point numbers and variables. The
MicroBlaze floating point unit only handles single precision floating.
Therefore, to test the floating point hardware, sp_flop.c should be included
in this project. */
vStartMathTasks( mainFLOP_TASK_PRIORITY );
/* Start the tasks that implements the command console on the UART, as
described above. */
vUARTCommandConsoleStart( mainUART_COMMAND_CONSOLE_STACK_SIZE, mainUART_COMMAND_CONSOLE_TASK_PRIORITY );
/* Register the standard CLI commands. */
vRegisterSampleCLICommands();
/* Create the register check tasks, as described at the top of this file */
xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL );
/* Create the task that performs the 'check' functionality, as described at
the top of this file. */
xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* Start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following
line will never be reached. If the following line does execute, then
there was insufficient FreeRTOS heap memory available for the Idle and/or
timer tasks to be created. See the memory management section on the
FreeRTOS web site for more details on the FreeRTOS heap
http://www.freertos.org/a00111.html. */
for( ;; );
}
void main_full( void )
{
/* Start all the other standard demo/test tasks. They have no particular
functionality, but do demonstrate how to use the FreeRTOS API and test the
kernel port. */
vStartInterruptQueueTasks();
vStartDynamicPriorityTasks();
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vCreateBlockTimeTasks();
vStartCountingSemaphoreTasks();
vStartGenericQueueTasks( tskIDLE_PRIORITY );
vStartRecursiveMutexTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartMathTasks( mainFLOP_TASK_PRIORITY );
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_PRIORITY );
vStartEventGroupTasks();
vStartInterruptSemaphoreTasks();
vStartQueueSetTasks();
vStartTaskNotifyTask();
/* Create the register check tasks, as described at the top of this file */
xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL );
/* Create the task that performs the 'check' functionality, as described at
the top of this file. */
xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* The set of tasks created by the following function call have to be
created last as they keep account of the number of tasks they expect to see
running. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following
line will never be reached. If the following line does execute, then
there was either insufficient FreeRTOS heap memory available for the idle
and/or timer tasks to be created, or vTaskStartScheduler() was called from
User mode. See the memory management section on the FreeRTOS web site for
more details on the FreeRTOS heap http://www.freertos.org/a00111.html. The
mode from which main() is called is set in the C start up code and must be
a privileged mode (not user mode). */
for( ;; );
}
void main_full( void )
{
/* Start all the other standard demo/test tasks. The have not particular
functionality, but do demonstrate how to use the FreeRTOS API and test the
kernel port. */
vStartInterruptQueueTasks();
vStartIntegerMathTasks( tskIDLE_PRIORITY );
vStartDynamicPriorityTasks();
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vCreateBlockTimeTasks();
vStartCountingSemaphoreTasks();
vStartGenericQueueTasks( tskIDLE_PRIORITY );
vStartRecursiveMutexTasks();
vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
vStartQueueSetTasks();
vStartTaskNotifyTask();
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartEventGroupTasks();
vStartInterruptSemaphoreTasks();
/* The set of tasks created by the following function call have to be
created last as they keep account of the number of tasks they expect to see
running. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
int main_full( void )
{
/* Usage instructions on http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html */
/* Initialise the LCD and output a bitmap. The IP address will also be
displayed on the LCD when it has been obtained. */
vInitialiseLCD();
/* If the file system is only going to be accessed from one task then
F_FS_THREAD_AWARE can be set to 0 and the set of example files are created
before the RTOS scheduler is started. If the file system is going to be
access from more than one task then F_FS_THREAD_AWARE must be set to 1 and
the set of sample files are created from the idle task hook function
vApplicationIdleHook(). */
#if( F_FS_THREAD_AWARE == 0 )
{
/* Initialise the drive and file system, then create a few example
files. The files can be viewed and accessed via the CLI. View the
documentation page for this demo (link at the top of this file) for more
information. */
vCreateAndVerifySampleFiles();
}
#endif
/* Register example generic, file system related and UDP related CLI
commands respectively. Type 'help' into the command console to view a list
of registered commands. */
vRegisterSampleCLICommands();
vRegisterFileSystemCLICommands();
vRegisterUDPCLICommands();
/* Initialise the network interface. Tasks that use the network are
created in the network event hook when the network is connected and ready
for use. The address values passed in here are used if ipconfigUSE_DHCP is
set to 0, or if ipconfigUSE_DHCP is set to 1 but a DHCP server cannot be
contacted. The IP address actually used is displayed on the LCD (after DHCP
has completed if DHCP is used). */
FreeRTOS_IPInit( ucIPAddress, ucNetMask, ucGatewayAddress, ucDNSServerAddress, ucMACAddress );
/* Create all the other standard demo tasks. */
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_TASK_PRIORITY );
vStartQueueSetTasks();
vStartRecursiveMutexTasks();
vStartEventGroupTasks();
vStartTaskNotifyTask();
vStartInterruptSemaphoreTasks();
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartInterruptQueueTasks();
/* Create the register check tasks, as described at the top of this
file */
xTaskCreate( prvRegTest1Task, "Reg1", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTest2Task, "Reg2", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );
/* Start the scheduler itself. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}