void
vc4_flush(struct pipe_context *pctx)
{
struct vc4_context *vc4 = vc4_context(pctx);
if (!vc4->needs_flush)
return;
/* The RCL setup would choke if the draw bounds cause no drawing, so
* just drop the drawing if that's the case.
*/
if (vc4->draw_max_x <= vc4->draw_min_x ||
vc4->draw_max_y <= vc4->draw_min_y) {
vc4_job_reset(vc4);
return;
}
/* Increment the semaphore indicating that binning is done and
* unblocking the render thread. Note that this doesn't act until the
* FLUSH completes.
*/
cl_ensure_space(&vc4->bcl, 8);
cl_u8(&vc4->bcl, VC4_PACKET_INCREMENT_SEMAPHORE);
/* The FLUSH caps all of our bin lists with a VC4_PACKET_RETURN. */
cl_u8(&vc4->bcl, VC4_PACKET_FLUSH);
vc4_setup_rcl(vc4);
vc4_job_submit(vc4);
}
void
vc4_flush(struct pipe_context *pctx)
{
struct vc4_context *vc4 = vc4_context(pctx);
struct pipe_surface *cbuf = vc4->framebuffer.cbufs[0];
struct pipe_surface *zsbuf = vc4->framebuffer.zsbuf;
if (!vc4->needs_flush)
return;
/* The RCL setup would choke if the draw bounds cause no drawing, so
* just drop the drawing if that's the case.
*/
if (vc4->draw_max_x <= vc4->draw_min_x ||
vc4->draw_max_y <= vc4->draw_min_y) {
vc4_job_reset(vc4);
return;
}
/* Increment the semaphore indicating that binning is done and
* unblocking the render thread. Note that this doesn't act until the
* FLUSH completes.
*/
cl_ensure_space(&vc4->bcl, 8);
struct vc4_cl_out *bcl = cl_start(&vc4->bcl);
cl_u8(&bcl, VC4_PACKET_INCREMENT_SEMAPHORE);
/* The FLUSH caps all of our bin lists with a VC4_PACKET_RETURN. */
cl_u8(&bcl, VC4_PACKET_FLUSH);
cl_end(&vc4->bcl, bcl);
if (cbuf && (vc4->resolve & PIPE_CLEAR_COLOR0)) {
pipe_surface_reference(&vc4->color_write, cbuf);
if (!(vc4->cleared & PIPE_CLEAR_COLOR0)) {
pipe_surface_reference(&vc4->color_read, cbuf);
} else {
pipe_surface_reference(&vc4->color_read, NULL);
}
} else {
pipe_surface_reference(&vc4->color_write, NULL);
pipe_surface_reference(&vc4->color_read, NULL);
}
if (vc4->framebuffer.zsbuf &&
(vc4->resolve & (PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL))) {
pipe_surface_reference(&vc4->zs_write, zsbuf);
if (!(vc4->cleared & (PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL))) {
pipe_surface_reference(&vc4->zs_read, zsbuf);
} else {
pipe_surface_reference(&vc4->zs_read, NULL);
}
} else {
pipe_surface_reference(&vc4->zs_write, NULL);
pipe_surface_reference(&vc4->zs_read, NULL);
}
vc4_job_submit(vc4);
}
/**
* HW-2116 workaround: Flush the batch before triggering the hardware state
* counter wraparound behavior.
*
* State updates are tracked by a global counter which increments at the first
* state update after a draw or a START_BINNING. Tiles can then have their
* state updated at draw time with a set of cheap checks for whether the
* state's copy of the global counter matches the global counter the last time
* that state was written to the tile.
*
* The state counters are relatively small and wrap around quickly, so you
* could get false negatives for needing to update a particular state in the
* tile. To avoid this, the hardware attempts to write all of the state in
* the tile at wraparound time. This apparently is broken, so we just flush
* everything before that behavior is triggered. A batch flush is sufficient
* to get our current contents drawn and reset the counters to 0.
*
* Note that we can't just use VC4_PACKET_FLUSH_ALL, because that caps the
* tiles with VC4_PACKET_RETURN_FROM_LIST.
*/
static void
vc4_hw_2116_workaround(struct pipe_context *pctx, int vert_count)
{
struct vc4_context *vc4 = vc4_context(pctx);
struct vc4_job *job = vc4_get_job_for_fbo(vc4);
if (job->draw_calls_queued + vert_count / 65535 >= VC4_HW_2116_COUNT) {
perf_debug("Flushing batch due to HW-2116 workaround "
"(too many draw calls per scene\n");
vc4_job_submit(vc4, job);
}
}
static bool
vc4_tile_blit(struct pipe_context *pctx, const struct pipe_blit_info *info)
{
struct vc4_context *vc4 = vc4_context(pctx);
bool msaa = (info->src.resource->nr_samples > 1 ||
info->dst.resource->nr_samples > 1);
int tile_width = msaa ? 32 : 64;
int tile_height = msaa ? 32 : 64;
if (util_format_is_depth_or_stencil(info->dst.resource->format))
return false;
if (info->scissor_enable)
return false;
if ((info->mask & PIPE_MASK_RGBA) == 0)
return false;
if (info->dst.box.x != info->src.box.x ||
info->dst.box.y != info->src.box.y ||
info->dst.box.width != info->src.box.width ||
info->dst.box.height != info->src.box.height) {
return false;
}
int dst_surface_width = u_minify(info->dst.resource->width0,
info->dst.level);
int dst_surface_height = u_minify(info->dst.resource->height0,
info->dst.level);
if (is_tile_unaligned(info->dst.box.x, tile_width) ||
is_tile_unaligned(info->dst.box.y, tile_height) ||
(is_tile_unaligned(info->dst.box.width, tile_width) &&
info->dst.box.x + info->dst.box.width != dst_surface_width) ||
(is_tile_unaligned(info->dst.box.height, tile_height) &&
info->dst.box.y + info->dst.box.height != dst_surface_height)) {
return false;
}
/* VC4_PACKET_LOAD_TILE_BUFFER_GENERAL uses the
* VC4_PACKET_TILE_RENDERING_MODE_CONFIG's width (determined by our
* destination surface) to determine the stride. This may be wrong
* when reading from texture miplevels > 0, which are stored in
* POT-sized areas. For MSAA, the tile addresses are computed
* explicitly by the RCL, but still use the destination width to
* determine the stride (which could be fixed by explicitly supplying
* it in the ABI).
*/
struct vc4_resource *rsc = vc4_resource(info->src.resource);
uint32_t stride;
if (info->src.resource->nr_samples > 1)
stride = align(dst_surface_width, 32) * 4 * rsc->cpp;
else if (rsc->slices[info->src.level].tiling == VC4_TILING_FORMAT_T)
stride = align(dst_surface_width * rsc->cpp, 128);
else
stride = align(dst_surface_width * rsc->cpp, 16);
if (stride != rsc->slices[info->src.level].stride)
return false;
if (info->dst.resource->format != info->src.resource->format)
return false;
if (false) {
fprintf(stderr, "RCL blit from %d,%d to %d,%d (%d,%d)\n",
info->src.box.x,
info->src.box.y,
info->dst.box.x,
info->dst.box.y,
info->dst.box.width,
info->dst.box.height);
}
struct pipe_surface *dst_surf =
vc4_get_blit_surface(pctx, info->dst.resource, info->dst.level);
struct pipe_surface *src_surf =
vc4_get_blit_surface(pctx, info->src.resource, info->src.level);
vc4_flush_jobs_reading_resource(vc4, info->src.resource);
struct vc4_job *job = vc4_get_job(vc4, dst_surf, NULL);
pipe_surface_reference(&job->color_read, src_surf);
/* If we're resolving from MSAA to single sample, we still need to run
* the engine in MSAA mode for the load.
*/
if (!job->msaa && info->src.resource->nr_samples > 1) {
job->msaa = true;
job->tile_width = 32;
job->tile_height = 32;
}
job->draw_min_x = info->dst.box.x;
job->draw_min_y = info->dst.box.y;
job->draw_max_x = info->dst.box.x + info->dst.box.width;
job->draw_max_y = info->dst.box.y + info->dst.box.height;
job->draw_width = dst_surf->width;
job->draw_height = dst_surf->height;
job->tile_width = tile_width;
job->tile_height = tile_height;
job->msaa = msaa;
job->needs_flush = true;
job->resolve |= PIPE_CLEAR_COLOR;
vc4_job_submit(vc4, job);
pipe_surface_reference(&dst_surf, NULL);
pipe_surface_reference(&src_surf, NULL);
return true;
}
static void
vc4_clear(struct pipe_context *pctx, unsigned buffers,
const union pipe_color_union *color, double depth, unsigned stencil)
{
struct vc4_context *vc4 = vc4_context(pctx);
struct vc4_job *job = vc4_get_job_for_fbo(vc4);
/* We can't flag new buffers for clearing once we've queued draws. We
* could avoid this by using the 3d engine to clear.
*/
if (job->draw_calls_queued) {
perf_debug("Flushing rendering to process new clear.\n");
vc4_job_submit(vc4, job);
job = vc4_get_job_for_fbo(vc4);
}
if (buffers & PIPE_CLEAR_COLOR0) {
struct vc4_resource *rsc =
vc4_resource(vc4->framebuffer.cbufs[0]->texture);
uint32_t clear_color;
if (vc4_rt_format_is_565(vc4->framebuffer.cbufs[0]->format)) {
/* In 565 mode, the hardware will be packing our color
* for us.
*/
clear_color = pack_rgba(PIPE_FORMAT_R8G8B8A8_UNORM,
color->f);
} else {
/* Otherwise, we need to do this packing because we
* support multiple swizzlings of RGBA8888.
*/
clear_color =
pack_rgba(vc4->framebuffer.cbufs[0]->format,
color->f);
}
job->clear_color[0] = job->clear_color[1] = clear_color;
rsc->initialized_buffers |= (buffers & PIPE_CLEAR_COLOR0);
}
if (buffers & PIPE_CLEAR_DEPTHSTENCIL) {
struct vc4_resource *rsc =
vc4_resource(vc4->framebuffer.zsbuf->texture);
unsigned zsclear = buffers & PIPE_CLEAR_DEPTHSTENCIL;
/* Clearing ZS will clear both Z and stencil, so if we're
* trying to clear just one then we need to draw a quad to do
* it instead.
*/
if ((zsclear == PIPE_CLEAR_DEPTH ||
zsclear == PIPE_CLEAR_STENCIL) &&
(rsc->initialized_buffers & ~(zsclear | job->cleared)) &&
util_format_is_depth_and_stencil(vc4->framebuffer.zsbuf->format)) {
perf_debug("Partial clear of Z+stencil buffer, "
"drawing a quad instead of fast clearing\n");
vc4_blitter_save(vc4);
util_blitter_clear(vc4->blitter,
vc4->framebuffer.width,
vc4->framebuffer.height,
1,
zsclear,
NULL, depth, stencil);
buffers &= ~zsclear;
if (!buffers)
return;
}
/* Though the depth buffer is stored with Z in the high 24,
* for this field we just need to store it in the low 24.
*/
if (buffers & PIPE_CLEAR_DEPTH) {
job->clear_depth = util_pack_z(PIPE_FORMAT_Z24X8_UNORM,
depth);
}
if (buffers & PIPE_CLEAR_STENCIL)
job->clear_stencil = stencil;
rsc->initialized_buffers |= zsclear;
}
job->draw_min_x = 0;
job->draw_min_y = 0;
job->draw_max_x = vc4->framebuffer.width;
job->draw_max_y = vc4->framebuffer.height;
job->cleared |= buffers;
job->resolve |= buffers;
vc4_start_draw(vc4);
}
