C++ (Cpp) ventana_panel_init Beispiele

Beispiel #1

Datei: board-ventana.c Projekt: Krylon360/lge_kernel_startablet

static void __init tegra_ventana_init(void)
{
#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
	defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9)
	struct board_info BoardInfo;
#endif

	tegra_common_init();
	tegra_clk_init_from_table(ventana_clk_init_table);
	ventana_pinmux_init();
	ventana_i2c_init();
	snprintf(usb_serial_num, sizeof(usb_serial_num), "%llx", tegra_chip_uid());
	andusb_plat.serial_number = kstrdup(usb_serial_num, GFP_KERNEL);
	tegra_i2s_device1.dev.platform_data = &tegra_audio_pdata[0];
	tegra_i2s_device2.dev.platform_data = &tegra_audio_pdata[1];
	tegra_spdif_device.dev.platform_data = &tegra_spdif_pdata;
	tegra_das_device.dev.platform_data = &tegra_das_pdata;
	tegra_ehci2_device.dev.platform_data
		= &ventana_ehci2_ulpi_platform_data;
	platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));

	ventana_sdhci_init();
	ventana_charge_init();
	ventana_regulator_init();

#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
	defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9)

	tegra_get_board_info(&BoardInfo);

	/* boards with sku > 0 have atmel touch panels */
	if (BoardInfo.sku) {
		pr_info("Initializing Atmel touch driver\n");
		ventana_touch_init_atmel();
	} else {
		pr_info("Initializing Panjit touch driver\n");
		ventana_touch_init_panjit();
	}
#endif

#ifdef CONFIG_KEYBOARD_GPIO
	ventana_keys_init();
#endif
#ifdef CONFIG_KEYBOARD_TEGRA
	ventana_kbc_init();
#endif

	ventana_wired_jack_init();
	ventana_usb_init();
	ventana_gps_init();
	ventana_panel_init();
	ventana_sensors_init();
	ventana_bt_rfkill();
	ventana_power_off_init();
	ventana_emc_init();
#ifdef CONFIG_BT_BLUESLEEP
	tegra_setup_bluesleep();
#endif
}

Beispiel #2

Datei: board-acer-t20.c Projekt: deprite/android_kernel_a100

static void __init acer_t20_init(void)
{

	tegra_clk_init_from_table(ventana_clk_init_table);
	ventana_pinmux_init();
	ventana_i2c_init();
	ventana_uart_init();
	tegra_ehci2_device.dev.platform_data
		= &ventana_ehci2_ulpi_platform_data;
	platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));

	ventana_sdhci_init();
	acer_t20_charge_init();
	acer_t20_regulator_init();

#ifdef CONFIG_TOUCHSCREEN_CYPRESS
	ventana_touch_init_cypress();
#endif
#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT1386
	touch_init_atmel_mXT1386();
#endif
#ifdef CONFIG_TOUCHSCREEN_ATMEL_768E
	touch_init_atmel_mXT768e();
#endif
#ifdef CONFIG_KEYBOARD_GPIO
	acer_keys_init();
#endif
#ifdef CONFIG_ROTATELOCK
        rotationlock_init();
#endif
#ifdef CONFIG_DOCK_V1
	acer_dock_init();
#endif
	acer_board_info();

#ifdef CONFIG_PSENSOR
	p_sensor_init();
#endif
	ventana_usb_init();
	ventana_gps_init();
	ventana_panel_init();
	ventana_sensors_init();
	//ventana_bt_rfkill();
	ventana_power_off_init();
	acer_t20_emc_init();

	ventana_setup_bluesleep();
#if defined(CONFIG_ACER_VIBRATOR)
	vib_init();
#endif
	tegra_release_bootloader_fb();
}

Beispiel #3

Datei: board-ventana.c Projekt: corvusmod/kernel_asus_tf101-lumpy

static void __init tegra_ventana_init(void)
{
	struct board_info BoardInfo;
	tegra_booting_info();
	ventana_setup_misc();
	tegra_clk_init_from_table(ventana_clk_init_table);
	ventana_pinmux_init();
	ventana_i2c_init();
        snprintf(ventana_chipid, sizeof(ventana_chipid), "%016llx", tegra_chip_uid());
	ventana_uart_init();

	if(ASUS3GAvailable()) {
		tegra_ehci2_device.dev.platform_data
			= &ventana_ehci2_ulpi_platform_data;
	}

	platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));

	ventana_sdhci_init();
	//ventana_charge_init();
	ventana_regulator_init();
	//ventana_charger_init();

	tegra_get_board_info(&BoardInfo);

#if defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9) || defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9_EP102)
       pr_info("Initializing Atmel touch driver\n");
       ventana_touch_init_atmel();
#elif defined(CONFIG_TOUCHSCREEN_PANJIT_I2C)
       pr_info("Initializing Panjit touch driver\n");
       ventana_touch_init_panjit();
#endif


#ifdef CONFIG_KEYBOARD_GPIO
	ventana_keys_init();
#endif

#ifdef CONFIG_DSP_FM34
	ventana_dsp_init();
#endif
	ventana_usb_init();
	ventana_gps_init();
	ventana_panel_init();
	ventana_sensors_init();
	//ventana_bt_rfkill();
	ventana_power_off_init();
	ventana_emc_init();

	ventana_setup_bluesleep();
//	tegra_release_bootloader_fb();
}

Beispiel #4

Datei: board-ventana.c Projekt: pio-masaki/android-kernel-at1s0

static void __init tegra_ventana_init(void)
{
	struct board_info BoardInfo;

	tegra_clk_init_from_table(ventana_clk_init_table);
	ventana_pinmux_init();
	ventana_i2c_init();
	ventana_uart_init();
	tegra_ehci2_device.dev.platform_data
		= &ventana_ehci2_ulpi_platform_data;
	platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));
	tegra_ram_console_debug_init();
	ventana_sdhci_init();
	ventana_charge_init();
	ventana_regulator_init();
	ventana_charger_init();

	tegra_get_board_info(&BoardInfo);

	/* boards with sku > 0 have atmel touch panels */
	if (BoardInfo.sku) {
		pr_info("Initializing Atmel touch driver\n");
		ventana_touch_init_atmel();
	} else {
		pr_info("Initializing Panjit touch driver\n");
		ventana_touch_init_panjit();
	}

#ifdef CONFIG_KEYBOARD_GPIO
	ventana_keys_init();
#endif

	ventana_usb_init();
	ventana_gps_init();
	ventana_panel_init();
	ventana_sensors_init();
	ventana_bt_rfkill();
	ventana_power_off_init();
	ventana_emc_init();

	ventana_setup_bluesleep();
	tegra_release_bootloader_fb();
}

Beispiel #5

static void __init tegra_ventana_init(void)
{
#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
	defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9) || defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9_EP102)
	struct board_info BoardInfo;
#endif
	tegra_booting_info();
	tegra_common_init();
	ventana_setup_misc();
	tegra_clk_init_from_table(ventana_clk_init_table);
	ventana_pinmux_init();
	ventana_i2c_init();
        ventana_uart_init();
	snprintf(ventana_chipid, sizeof(ventana_chipid), "%016llx",
	    tegra_chip_uid());
	snprintf(usb_serial_num, sizeof(usb_serial_num), "%llx", tegra_chip_uid());
	andusb_plat.serial_number = kstrdup(usb_serial_num, GFP_KERNEL);
	if (ASUSGetProjectID() == 102) {
		andusb_plat.products[0].product_id = USB_SL101_PRODUCT_ID_MTP;
		andusb_plat.products[1].product_id = USB_SL101_PRODUCT_ID_MTP_ADB;
		andusb_plat.products[2].product_id = USB_SL101_PRODUCT_ID_RNDIS;
		andusb_plat.products[3].product_id = USB_SL101_PRODUCT_ID_RNDIS_ADB;
	}

	tegra_i2s_device1.dev.platform_data = &tegra_audio_pdata[0];
	tegra_i2s_device2.dev.platform_data = &tegra_audio_pdata[1];
	tegra_spdif_device.dev.platform_data = &tegra_spdif_pdata;
	tegra_das_device.dev.platform_data = &tegra_das_pdata;

	//disable for wifi sku
	if (ASUS3GAvailable()) {
               tegra_ehci2_device.dev.platform_data
                       = &ventana_ehci2_ulpi_platform_data;
	}

	platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));

	if ((ASUSGetProjectID() != 103) && (!console_none_on_cmdline)) {
		//register debug uart resource only if
		//"console=ttyXX" is specified and running target platform
		//is not JN101(EP103)
		platform_device_register(&debug_uart);
		tegra_gpio_enable(TEGRA_GPIO_PB0);
		gpio_request(TEGRA_GPIO_PB0, "UART4_RXD");
		//limit RXD of UART debug console.
		gpio_direction_output(TEGRA_GPIO_PB0, 1);
	}

	ventana_sdhci_init();
	//ventana_charge_init();
	ventana_regulator_init();

#if defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9) || defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9_EP102)
       pr_info("Initializing Atmel touch driver\n");
       ventana_touch_init_atmel();
#elif defined(CONFIG_TOUCHSCREEN_PANJIT_I2C)
       pr_info("Initializing Panjit touch driver\n");
       ventana_touch_init_panjit();
#endif

#ifdef CONFIG_TOUCHSCREEN_CYTTSP_I2C
ventana_touch_init();
#endif
#ifdef CONFIG_KEYBOARD_GPIO
	ventana_keys_init();
#endif
#ifdef CONFIG_KEYBOARD_TEGRA
	ventana_kbc_init();
#endif
#ifdef CONFIG_DSP_FM34
	ventana_dsp_init();
#endif

	ventana_wired_jack_init();
	ventana_usb_init();
	ventana_gps_init();
	ventana_panel_init();
	ventana_sensors_init();
	ventana_bt_rfkill();
	ventana_power_off_init();
	ventana_emc_init();
#ifdef CONFIG_BT_BLUESLEEP
	tegra_setup_bluesleep();
#endif
}

Beispiel #6

Datei: board-ventana.c Projekt: DerArtem/android_kernel_dell_streak7

static void __init tegra_ventana_init(void)
{
#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
	defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9)
	struct board_info BoardInfo;
#endif

	tegra_common_init();
	tegra_clk_init_from_table(ventana_clk_init_table);
	ventana_pinmux_init();
	ventana_i2c_init();
	snprintf(usb_serial_num, sizeof(usb_serial_num), "%llx", tegra_chip_uid());
	andusb_plat.serial_number = kstrdup(usb_serial_num, GFP_KERNEL);
	tegra_i2s_device1.dev.platform_data = &tegra_audio_pdata[0];
	tegra_i2s_device2.dev.platform_data = &tegra_audio_pdata[1];
	tegra_spdif_device.dev.platform_data = &tegra_spdif_pdata;
#ifdef CONFIG_BUILDTYPE_SHIP
	if (console_set_none == 1)
	{
		tegra_pinmux_set_tristate(TEGRA_PINGROUP_IRRX,
					TEGRA_TRI_TRISTATE);
		tegra_pinmux_set_tristate(TEGRA_PINGROUP_IRTX,
					TEGRA_TRI_TRISTATE);
	}
	else
	{
		if (is_tegra_debug_uartport_hs() == true)
			platform_device_register(&tegra_uartd_device);
		else
			platform_device_register(&debug_uart);
	}
#else
	if (is_tegra_debug_uartport_hs() == true)
		platform_device_register(&tegra_uartd_device);
	else
		platform_device_register(&debug_uart);
#endif
	tegra_das_device.dev.platform_data = &tegra_das_pdata;
	
	
	platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));

	ventana_sdhci_init();
	
	ventana_regulator_init();

#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
	defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9)

	tegra_get_board_info(&BoardInfo);

	/* boards with sku > 0 have atmel touch panels */
/*	if (BoardInfo.sku) {
		pr_info("Initializing Atmel touch driver\n");
		ventana_touch_init_atmel();
	} else {
		pr_info("Initializing Panjit touch driver\n");
		ventana_touch_init_panjit();
	}*/ 
#endif


#ifdef CONFIG_TOUCHSCREEN_ATMEL_mXT224 
	ventana_touch_init_atmel();
#endif



#ifdef CONFIG_ATA2538_CAPKEY
	ventana_capkey_init();
#endif


#ifdef CONFIG_TEGRA_KEYPAD
	tegra_keypad_init();
#endif

#ifdef CONFIG_KEYBOARD_GPIO
	
#endif
#ifdef CONFIG_KEYBOARD_TEGRA
	
#endif

	
	ventana_datacards_init();
	ventana_usb_init();
	ventana_gps_init();
	ventana_panel_init();
	ventana_sensors_init();
	ventana_bt_rfkill();
	ventana_power_off_init();
	
	tegra_setup_bluesleep();
}