void start_armboot (void)
{
init_fnc_t **init_fnc_ptr;
char *s;
int mmc_exist = 0;
#if defined(CONFIG_VFD) || defined(CONFIG_LCD)
unsigned long addr;
#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t));
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
memset ((void*)gd, 0, sizeof (gd_t));
gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
memset (gd->bd, 0, sizeof (bd_t));
// gd->flags |= GD_FLG_RELOC;
monitor_flash_len = _bss_start - _armboot_start;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
if ((*init_fnc_ptr)() != 0) {
hang ();
}
}
/* armboot_start is defined in the board-specific linker script */
mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN,
CONFIG_SYS_MALLOC_LEN);
#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
display_flash_config (flash_init ());
#endif /* CONFIG_SYS_NO_FLASH */
#ifdef CONFIG_VFD
# ifndef PAGE_SIZE
# define PAGE_SIZE 4096
# endif
/*
* reserve memory for VFD display (always full pages)
*/
/* bss_end is defined in the board-specific linker script */
addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
vfd_setmem (addr);
gd->fb_base = addr;
#endif /* CONFIG_VFD */
#ifdef CONFIG_LCD
/* board init may have inited fb_base */
if (!gd->fb_base) {
# ifndef PAGE_SIZE
# define PAGE_SIZE 4096
# endif
/*
* reserve memory for LCD display (always full pages)
*/
/* bss_end is defined in the board-specific linker script */
addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
lcd_setmem (addr);
gd->fb_base = addr;
}
#endif /* CONFIG_LCD */
#if defined(CONFIG_CMD_NAND)
puts ("NAND: ");
nand_init(); /* go init the NAND */
#endif
#if defined(CONFIG_CMD_ONENAND)
onenand_init();
#endif
#ifdef CONFIG_GENERIC_MMC
puts ("MMC: ");
mmc_exist = mmc_initialize (gd->bd);
if (mmc_exist != 0)
{
puts ("0 MB\n");
}
#endif
#ifdef CONFIG_HAS_DATAFLASH
AT91F_DataflashInit();
dataflash_print_info();
#endif
/* initialize environment */
env_relocate ();
#ifdef CONFIG_VFD
/* must do this after the framebuffer is allocated */
drv_vfd_init();
#endif /* CONFIG_VFD */
#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
#endif
/* IP Address */
gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
stdio_init (); /* get the devices list going. */
jumptable_init ();
#if defined(CONFIG_API)
/* Initialize API */
api_init ();
#endif
console_init_r (); /* fully init console as a device */
#if defined(CONFIG_ARCH_MISC_INIT)
/* miscellaneous arch dependent initialisations */
arch_misc_init ();
#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
#endif
/* enable exceptions */
enable_interrupts ();
/* Perform network card initialisation if necessary */
#ifdef CONFIG_DRIVER_TI_EMAC
/* XXX: this needs to be moved to board init */
extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
if (getenv ("ethaddr")) {
uchar enetaddr[6];
eth_getenv_enetaddr("ethaddr", enetaddr);
davinci_eth_set_mac_addr(enetaddr);
}
#endif
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
/* XXX: this needs to be moved to board init */
if (getenv ("ethaddr")) {
uchar enetaddr[6];
eth_getenv_enetaddr("ethaddr", enetaddr);
smc_set_mac_addr(enetaddr);
}
#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
/* Initialize from environment */
if ((s = getenv ("loadaddr")) != NULL) {
load_addr = simple_strtoul (s, NULL, 16);
}
#if defined(CONFIG_CMD_NET)
if ((s = getenv ("bootfile")) != NULL) {
copy_filename (BootFile, s, sizeof (BootFile));
}
#endif
#ifdef BOARD_LATE_INIT
board_late_init ();
#endif
#ifdef CONFIG_BITBANGMII
bb_miiphy_init();
#endif
#if defined(CONFIG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
puts ("Net: ");
#endif
eth_initialize(gd->bd);
#if defined(CONFIG_RESET_PHY_R)
debug ("Reset Ethernet PHY\n");
reset_phy();
#endif
#endif
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
main_loop ();
}
/* NOTREACHED - no way out of command loop except booting */
}
void start_armboot (void)
{
init_fnc_t **init_fnc_ptr;
char *s;
ulong size;
#if defined(CONFIG_VFD) || defined(CONFIG_LCD)
unsigned long addr;
#endif
#ifdef CFG_UBOOT_PROFILING
unsigned int time_start_armboot = get_timer(0);
unsigned int time_init_sequence;
unsigned int time_misc_init;
unsigned int time_env;
unsigned int time_nand;
unsigned int time_bat;
unsigned int time_show_logo;
unsigned int time_backlight;
unsigned int time_sw_env;
#endif
#ifdef CFG_UBOOT_PROFILING
boot_time = get_timer(0);
#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t));
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
memset ((void*)gd, 0, sizeof (gd_t));
gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
memset (gd->bd, 0, sizeof (bd_t));
monitor_flash_len = _bss_start - _armboot_start;
#ifdef CFG_UBOOT_PROFILING
time_init_sequence = get_timer(0);
#endif
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr)
{
if ((*init_fnc_ptr)() != 0) {
hang ();
}
}
/* armboot_start is defined in the board-specific linker script */
mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN);
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- init_sequence takes %d ms -------- \n", get_timer(time_init_sequence));
#endif
#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
display_flash_config (flash_init ());
#endif /* CONFIG_SYS_NO_FLASH */
#ifdef CONFIG_VFD
#ifndef PAGE_SIZE
#define PAGE_SIZE 4096
#endif
/*
* reserve memory for VFD display (always full pages)
*/
/* bss_end is defined in the board-specific linker script */
addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
size = vfd_setmem (addr);
gd->fb_base = addr;
#endif /* CONFIG_VFD */
#ifdef CONFIG_LCD
#ifndef PAGE_SIZE
#define PAGE_SIZE 4096
#endif
/*
* reserve memory for LCD display (always full pages)
*/
/* bss_end is defined in the board-specific linker script */
addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
size = lcd_setmem (addr);
gd->fb_base = addr;
#endif /* CONFIG_LCD */
#ifdef CONFIG_HAS_DATAFLASH
AT91F_DataflashInit();
dataflash_print_info();
#endif
#ifdef CFG_UBOOT_PROFILING
time_env = get_timer(0);
#endif
/* initialize environment */
env_relocate ();
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- env relocate takes %d ms -------- \n", get_timer(time_env));
#endif
#ifdef CONFIG_VFD
/* must do this after the framebuffer is allocated */
drv_vfd_init();
#endif /* CONFIG_VFD */
/* IP Address */
//gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
stdio_init (); /* get the devices list going. */
#ifdef CONFIG_CMC_PU2
load_sernum_ethaddr ();
#endif /* CONFIG_CMC_PU2 */
jumptable_init ();
//console_init_r (); /* fully init console as a device */ //marked by hong-rong
#if defined(CONFIG_CMD_NAND)
#ifdef CFG_UBOOT_PROFILING
time_nand= get_timer(0);
#endif
puts ("NAND: ");
nand_init(); /* go init the NAND */
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- nand init takes %d ms -------- \n", get_timer(time_nand));
#endif
#endif
#if defined(CONFIG_ARCH_MISC_INIT)
/* miscellaneous arch dependent initialisations */
arch_misc_init ();
#endif
#ifdef CFG_UBOOT_PROFILING
time_misc_init= get_timer(0);
#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
#endif
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- misc_init takes %d ms -------- \n", get_timer(time_misc_init));
#endif
#ifdef CONFIG_GENERIC_MMC
puts ("MMC: ");
mmc_initialize (gd->bd);
#endif
#ifdef CFG_POWER_CHARGING
#ifdef CFG_UBOOT_PROFILING
time_bat= get_timer(0);
#endif
#if defined(MT6516)
mt6516_bat_init();
#else
mt65xx_bat_init();
#endif
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- battery init takes %d ms -------- \n", get_timer(time_bat));
#endif
#else
/* NOTE: if define CFG_POWER_CHARGING, will rtc_boot_check() in mt65xx_bat_init() */
rtc_boot_check(false);
#endif
#ifdef CFG_UBOOT_PROFILING
time_show_logo= get_timer(0);
#endif
// Some driver refresh RAM data to LCM after sleeping out.
// LCM must sleep out before backlight on. Or Users may see the mess data in LCM in a instance.
mt65xx_disp_power(1);
if(g_boot_mode != ALARM_BOOT)
{
mt65xx_disp_show_boot_logo();
}
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- show logo takes %d ms -------- \n", get_timer(time_show_logo));
#endif
#ifdef CFG_UBOOT_PROFILING
time_show_logo= get_timer(0);
#endif
#ifdef CFG_UBOOT_PROFILING
time_backlight= get_timer(0);
#endif
mt65xx_backlight_on();
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- backlight takes %d ms -------- \n", get_timer(time_backlight));
#endif
#ifdef CFG_UBOOT_PROFILING
time_sw_env= get_timer(0);
#endif
//*****************
//* prepare mt65xx sw enviroment
#if defined(MT6516)
mt6516_sw_env();
#else
mt65xx_sw_env();
#endif
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- sw_env takes %d ms -------- \n", get_timer(time_sw_env));
#endif
#ifdef CFG_UBOOT_PROFILING
printf("[PROFILE] ------- start_armboot takes %d ms -------- \n", get_timer(time_start_armboot));
#endif
/* main_loop() can return to retry autoboot, if so just run it again */
for (;;) {
main_loop ();
}
/* NOTREACHED - no way out of command loop except booting */
}
