Beispiel #1
0
void vo_show_progress(int sizeM)
{
    video_set_cursor((video_get_rows() / 4) * 3, (video_get_colums() - 22)/ 2);
    video_printf("=====================\n");
    video_set_cursor((video_get_rows() / 4) * 3 + 1, (video_get_colums() - 22)/ 2);
    video_printf(">>> Written %4dM <<<\n", sizeM);
    video_set_cursor((video_get_rows() / 4) * 3 + 2, (video_get_colums() - 22)/ 2);
    video_printf("=====================\n");
    video_set_cursor(video_get_rows() - 1, 0);

    dprintf(CRITICAL,"... Written %dM\n", sizeM);
}
static void init_display_xy()
{
#if defined(DISPLAY_INFO_ON_LCM)
	video_clean_screen();
	video_set_cursor(video_get_rows()/2, 0);
	//video_set_cursor(1, 0);
#endif
}
Beispiel #3
0
/* Do any target specific intialization needed before entering fastboot mode */
void target_fastboot_init(void)
{
//                               
	#if defined (FASTBOOT_USERDEBUG) /* jjm_l10 */
	mt_disp_show_black_screen();
	video_clean_screen();
	video_set_cursor(video_get_rows()/4, 0);
	video_printf("[Fastboot Mode Entered!]\n");
	#endif
//                               
}
Beispiel #4
0
void fastboot_boot_menu(void)
{
          const char* title_msg = "Select Boot Mode:\n[VOLUME_UP to select.  VOLUME_DOWN is OK.]\n\n";
          video_clean_screen();
          video_set_cursor(video_get_rows()/2, 0);
          video_printf(title_msg);
          video_printf("[Recovery    Mode]             \n");
#ifdef MTK_FASTBOOT_SUPPORT
          video_printf("[Fastboot    Mode]         <<==\n");
#endif
          video_printf("[Normal      Boot]             \n");
#ifndef USER_BUILD
          video_printf("[Normal      Boot +ftrace]    \n");
          video_printf("[Normal      slub debug off]     \n");
#endif
          video_printf(" => FASTBOOT mode...\n");
}
Beispiel #5
0
void lock_warranty(void)
{
  const char* title_msg = "lock bootloader?\n\n";
  video_clean_screen();
  video_set_cursor(video_get_rows()/2, 0);
  video_printf(title_msg);
  video_printf("If you lock the bootloader,you will need to install official operating\n");
  video_printf("system software on this phone.\n\n");


  video_printf("To prevent unauthorized access to your personal data,locking the bootloader\n");
  video_printf("will also delete all personal data from your phone(a \"factory data reset\").\n\n");

  video_printf("Press the Volume UP/Down buttons to select Yes or No. \n\n");
  video_printf("Yes (Volume UP):Lock bootloader.\n\n");
  video_printf("No (Volume Down):Do not lock bootloader.\n\n");
}
Beispiel #6
0
void unlock_warranty(void)
{
  const char* title_msg = "Unlock bootloader?\n\n";
  video_clean_screen();
  video_set_cursor(video_get_rows()/2, 0);
  video_printf(title_msg);
  video_printf("If you unlock the bootloader,you will be able to install custom operating\n");
  video_printf("system software on this phone.\n\n");

  video_printf("A custom OS is not subject to the same testing as the original OS, and can\n");
  video_printf("cause your phone and installed applications to stop working properly.\n\n");

  video_printf("To prevent unauthorized access to your personal data,unlocking the bootloader\n");
  video_printf("will also delete all personal data from your phone(a \"factory data reset\").\n\n");

  video_printf("Press the Volume UP/Down buttons to select Yes or No. \n\n");
  video_printf("Yes (Volume UP):Unlock(may void warranty).\n\n");
  video_printf("No (Volume Down):Do not unlock bootloader.\n\n");

}
Beispiel #7
0
void boot_mode_menu_select()
{
          int select = 0;  // 0=recovery mode, 1=fastboot.  2=normal boot 3=normal boot + ftrace.4=slub debug off
          const char* title_msg = "Select Boot Mode:\n[VOLUME_UP to select.  VOLUME_DOWN is OK.]\n\n";
          video_clean_screen();
          video_set_cursor(video_get_rows()/2, 0);
          video_printf(title_msg);
          video_printf("[Recovery    Mode]         <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
          video_printf("[Fastboot    Mode]             \n");
#endif
          video_printf("[Normal      Boot]             \n");
#ifndef USER_BUILD
          video_printf("[Normal      Boot +ftrace]    \n");
          video_printf("[Normal      slub debug off]     \n");
#endif
          while(1)
          {
             if(mtk_detect_key(MT65XX_MENU_SELECT_KEY))//VOL_UP
             {
                    g_boot_menu = true;
                    switch(select) {

                        case 0:
#ifdef MTK_FASTBOOT_SUPPORT
                            select = 1;

                            video_set_cursor(video_get_rows()/2, 0);
                            video_printf(title_msg);
                            video_printf("[Recovery    Mode]             \n");
                            video_printf("[Fastboot    Mode]         <<==\n");
                            video_printf("[Normal      Boot]             \n");
#ifndef USER_BUILD
                            video_printf("[Normal      Boot +ftrace]     \n");
                            video_printf("[Normal      slub debug off]     \n");
#endif
                        break;
#endif
                        case 1:
                            select = 2;

                            video_set_cursor(video_get_rows()/2, 0);
                            video_printf(title_msg);
                            video_printf("[Recovery    Mode]             \n");
#ifdef MTK_FASTBOOT_SUPPORT
                            video_printf("[Fastboot    Mode]             \n");
#endif
                            video_printf("[Normal      Boot]         <<==\n");
#ifndef USER_BUILD
                            video_printf("[Normal      Boot +ftrace]     \n");
                            video_printf("[Normal      slub debug off]     \n");
#endif
                        break;

                        case 2:
#ifdef USER_BUILD
                            select = 0;
#else
                            select = 3;
#endif
    
                            video_set_cursor(video_get_rows()/2, 0);
                            video_printf(title_msg);
#ifdef USER_BUILD
                            video_printf("[Recovery    Mode]         <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
                            video_printf("[Fastboot    Mode]             \n");
#endif
                            video_printf("[Normal      Boot]             \n");
#else
                            video_printf("[Recovery    Mode]             \n");
#ifdef MTK_FASTBOOT_SUPPORT
                            video_printf("[Fastboot    Mode]             \n");
#endif
                            video_printf("[Normal      Boot]             \n");
                            video_printf("[Normal      Boot +ftrace] <<==\n");
                            video_printf("[Normal      slub debug off]     \n");
#endif
                        break;

#ifndef USER_BUILD
                        case 3:
                            select = 4;
                            video_set_cursor(video_get_rows()/2, 0);
                            video_printf(title_msg);
                            video_printf("[Recovery    Mode]             \n");
#ifdef MTK_FASTBOOT_SUPPORT
                            video_printf("[Fastboot    Mode]             \n");
#endif
                            video_printf("[Normal      Boot]             \n");
                            video_printf("[Normal      Boot +ftrace]     \n");
                            video_printf("[Normal      slub debug off] <<==\n");
                            
                        break;
#endif


#ifndef USER_BUILD
                        case 4:
                            select = 0;
                            video_set_cursor(video_get_rows()/2, 0);
                            video_printf(title_msg);
                            video_printf("[Recovery    Mode]         <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
                            video_printf("[Fastboot    Mode]             \n");
#endif
                            video_printf("[Normal      Boot]             \n");
                            video_printf("[Normal      Boot +ftrace]     \n");
                            video_printf("[Normal      slub debug off]     \n");                            
                        break;
#endif

                        default: 
                        break;
                    }
                    dprintf(CRITICAL,  "[VOL_UP]Key Detect, current select:%d\n", select);
                    mdelay(300);
             }
             else if(mtk_detect_key(MT65XX_MENU_OK_KEY))//VOL_DOWN,
             {
                 //use for OK
                 break;
             }
             else
             {
                //pass
             }
          }
          if(select == 0)
          {
               g_boot_mode = RECOVERY_BOOT;
          }
          else if(select == 1)
          {
                g_boot_mode = FASTBOOT;
          }
          else if(select == 2)
          {
                g_boot_mode = NORMAL_BOOT;
          }
          else if(select == 3)
          {
                sprintf(g_CMDLINE, "%s trace_buf_size=11m boot_time_ftrace", g_CMDLINE);
                g_boot_mode = NORMAL_BOOT;
          }
          else if (select == 4)
          {
                sprintf(g_CMDLINE, "%s slub_debug=-", g_CMDLINE);
                g_boot_mode = NORMAL_BOOT;
          }
          else{
                //pass
          }
          video_printf("\n");
          return;
}
Beispiel #8
0
void boot_mode_menu_select()
{
	int select = 0;  // 0=recovery mode, 1=fastboot.  2=normal boot 3=normal boot + ftrace.4=slub debug off
	const char* title_msg = "Select Boot Mode:\n[VOLUME_UP to select.  VOLUME_DOWN is OK.]\n\n";
	mt65xx_backlight_on();
	video_clean_screen();
	video_set_cursor(video_get_rows()/2, 0);
	video_printf(title_msg);
	video_printf("[Recovery    Mode]         <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
	video_printf("[Fastboot    Mode]             \n");
#endif
	video_printf("[Normal      Boot]             \n");
#if !defined(USER_BUILD) || defined(MTK_BUILD_ROOT)
	video_printf("[Normal      Boot +ftrace]    \n");
	video_printf("[Normal      slub debug off]     \n");
#endif
	while (1) {
		if (mtk_detect_key(MT65XX_MENU_SELECT_KEY)) { //VOL_UP
			g_boot_menu = true;
			switch (select) {

				case 0:
#ifdef MTK_FASTBOOT_SUPPORT
					select = 1;

					video_set_cursor(video_get_rows()/2, 0);
					video_printf(title_msg);
					video_printf("[Recovery    Mode]             \n");
					video_printf("[Fastboot    Mode]         <<==\n");
					video_printf("[Normal      Boot]             \n");
#if !defined(USER_BUILD) || defined(MTK_BUILD_ROOT)
					video_printf("[Normal      Boot +ftrace]     \n");
					video_printf("[Normal      slub debug off]     \n");
#endif
					break;
#endif
				case 1:
					select = 2;

					video_set_cursor(video_get_rows()/2, 0);
					video_printf(title_msg);
					video_printf("[Recovery    Mode]             \n");
#ifdef MTK_FASTBOOT_SUPPORT
					video_printf("[Fastboot    Mode]             \n");
#endif
					video_printf("[Normal      Boot]         <<==\n");
#if !defined(USER_BUILD) || defined(MTK_BUILD_ROOT)
					video_printf("[Normal      Boot +ftrace]     \n");
					video_printf("[Normal      slub debug off]     \n");
#endif
					break;

				case 2:
#if defined(USER_BUILD) && !defined(MTK_BUILD_ROOT)
					select = 0;
#else
					select = 3;
#endif

					video_set_cursor(video_get_rows()/2, 0);
					video_printf(title_msg);
#if defined(USER_BUILD) && !defined(MTK_BUILD_ROOT)
					video_printf("[Recovery    Mode]         <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
					video_printf("[Fastboot    Mode]             \n");
#endif
					video_printf("[Normal      Boot]             \n");
#else
					video_printf("[Recovery    Mode]             \n");
#ifdef MTK_FASTBOOT_SUPPORT
					video_printf("[Fastboot    Mode]             \n");
#endif
					video_printf("[Normal      Boot]             \n");
					video_printf("[Normal      Boot +ftrace] <<==\n");
					video_printf("[Normal      slub debug off]     \n");
#endif
					break;

#if !defined(USER_BUILD) || defined(MTK_BUILD_ROOT)
				case 3:
					select = 4;
					video_set_cursor(video_get_rows()/2, 0);
					video_printf(title_msg);
					video_printf("[Recovery    Mode]             \n");
#ifdef MTK_FASTBOOT_SUPPORT
					video_printf("[Fastboot    Mode]             \n");
#endif
					video_printf("[Normal      Boot]             \n");
					video_printf("[Normal      Boot +ftrace]     \n");
					video_printf("[Normal      slub debug off] <<==\n");

					break;
#endif


#if !defined(USER_BUILD) || defined(MTK_BUILD_ROOT)
				case 4:
					select = 0;
					video_set_cursor(video_get_rows()/2, 0);
					video_printf(title_msg);
					video_printf("[Recovery    Mode]         <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
					video_printf("[Fastboot    Mode]             \n");
#endif
					video_printf("[Normal      Boot]             \n");
					video_printf("[Normal      Boot +ftrace]     \n");
					video_printf("[Normal      slub debug off]     \n");
					break;
#endif

				default:
					break;
			}
			dprintf(0,  "[VOL_UP]Key Detect, current select:%d\n", select);
			mdelay(300);
		} else if (mtk_detect_key(MT65XX_MENU_OK_KEY)) { //VOL_DOWN,
			//use for OK
			break;
		} else {
			//pass
		}
	}
	if (select == 0) {
		g_boot_mode = RECOVERY_BOOT;
	} else if (select == 1) {
		g_boot_mode = FASTBOOT;
	} else if (select == 2) {
		g_boot_mode = NORMAL_BOOT;
	} else if (select == 3) {
                cmdline_append("boot_trace");
		g_boot_mode = NORMAL_BOOT;
	} else if (select == 4) {
		cmdline_append("slub_debug=-");
		g_boot_mode = NORMAL_BOOT;
	} else {
		//pass
	}

	video_set_cursor(video_get_rows()/2 +8, 0);
	return;
}