static int fake_sdio_device(void *data)
{
//struct msdc_host *host = mtk_msdc_host[3];
struct msdc_host *host = mtk_msdc_host[2]; //Denali use MSDC2 to connect 6630.
wait_sdio_autok_ready(host->mmc);
return 0;
}
static int lte_autok_writeproc(struct file *file,const char *buffer,
size_t count, loff_t *data)
{
char bufferContent[PROC_BUF_SIZE];
if(count >= PROC_BUF_SIZE)
{
printk(KERN_INFO "[%s] proc input size (%d) is larger than buffer size (%d) \n", __func__, (unsigned int)(count), PROC_BUF_SIZE);
return -EFAULT;
}
if (copy_from_user(bufferContent, buffer, count))
return -EFAULT;
bufferContent[count] = '\0';
//printk(KERN_INFO "[%s] bufferContent = %s \n", __func__, bufferContent);
//printk(KERN_INFO "[%s] lte_dev.sdio_func = 0x%x\n", __func__, lte_dev.sdio_func);
if(strcmp(bufferContent,"system_server") == 0)
{
struct task_struct *task;
// send uevent
printk(KERN_INFO "[%s] system_server\n", __func__);
#ifndef NATIVE_AUTOK
task = kthread_run(&mtlte_sys_trigger_auto_calibration,NULL,"trigger_autok");
#else
task = kthread_run(&wait_sdio_autok_ready, (void*)lte_dev.sdio_func->card->host, "trigger_autok");
#endif
}
else if(strcmp(bufferContent,"autok_done") == 0)
{
// change g_autok_finish
printk(KERN_INFO "[%s] autok_done\n", __func__);
//lte_autok_finish = 1;
lte_autok_finish++;
lte_autok_running--;
}
else
{
// send uevent
printk(KERN_INFO "[%s] %s\n", __func__, bufferContent);
#ifndef NATIVE_AUTOK
mtlte_sys_trigger_auto_calibration(NULL);
#else
//wait_sdio_autok_ready((void*)lte_dev.sdio_func->card->host);
wait_sdio_autok_ready((void*)lte_dev.sdio_func->card->host, 0);
#endif
}
return count;
}
int sdio_detect_do_autok(int chipId)
{
#if MTK_HIF_SDIO_AUTOK_ENABLED
BOOTMODE boot_mode;
boot_mode = get_boot_mode();
if (boot_mode == META_BOOT)
{
WMT_DETECT_INFO_FUNC("omit autok in meta mode\n");
return 0;
}
if (0x6630 == chipId)
{
#ifdef CONFIG_SDIOAUTOK_SUPPORT
if (NULL!= g_func)
{
WMT_DETECT_INFO_FUNC("wait_sdio_autok_ready++\n");
wait_sdio_autok_ready(g_func->card->host);
WMT_DETECT_INFO_FUNC("wait_sdio_autok_ready--\n");
}
else
{
WMT_DETECT_INFO_FUNC("g_func NULL, omit autok\n");
}
#else
WMT_DETECT_INFO_FUNC("MTK_SDIOAUTOK_SUPPORT not defined\n");
#endif
}
else
{
WMT_DETECT_INFO_FUNC("MT%x does not support SDIO3.0 autoK is not needed\n", chipId);
}
#else
WMT_DETECT_INFO_FUNC("MTK_HIF_SDIO_AUTOK_ENABLED is not defined\n");
#endif
return 0;
}
static int fake_sdio_device(void *data)
{
struct msdc_host *host = mtk_msdc_host[3];
wait_sdio_autok_ready(host->mmc);
return 0;
}
static
int mtlte_sys_sdio_probe( struct sdio_func *func, const struct sdio_device_id *id)
{
int ret ;
//char net_mac[6] ;
#ifdef MT_LTE_AUTO_CALIBRATION
#ifndef NATIVE_AUTOK
int lte_autok_finish_next;
#endif
BOOTMODE btmod;
#endif
unsigned int orig_WHCR = 0;
unsigned int changed_WHCR = 0;
unsigned int orig_WPLRCR = 0;
unsigned int changed_WPLRCR = 0;
KAL_RAWPRINT(("[PROBE] =======> mt_lte_sdio_probe\n"));
#ifdef MT_LTE_AUTO_CALIBRATION
mtlte_sdio_probe_done = 0;
#endif
LTE_WD_timeout_indicator = 0;
lte_dev.card_exist = 1 ;
lte_dev.sdio_thread_kick = 0 ;
lte_dev.sdio_thread_kick_isr = 0 ;
lte_dev.sdio_thread_kick_own_timer = 0 ;
lte_dev.sdio_thread_state = SDIO_THREAD_IDLE ;
lte_dev.sdio_func = func ;
/* Because MT7208 SDIO device add the r/w busy function,
We only can use block read at Tx/Rx port.
This quirk is force host to use block access if the transfer byte is equal to n*block size */
// func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
/* Because MT7208 SDIO device not support read 512 byte in data block
This quirk is set byte mode size to max 511 byte */
func->card->quirks |= MMC_QUIRK_BROKEN_BYTE_MODE_512;
/* enable the sdio device function */
if ((ret = sdio_open_device(func)) != KAL_SUCCESS){
KAL_RAWPRINT(("[PROBE] XXXXXX mt_lte_sdio_probe -sdio_open_device fail \n"));
goto OPEN_FAIL ;
}
#ifdef MT_LTE_AUTO_CALIBRATION
btmod = get_boot_mode();
printk("btmod = %d\n", btmod);
if ((btmod!=META_BOOT) && (btmod!=FACTORY_BOOT) && (btmod!=ATE_FACTORY_BOOT))
{
#ifndef NATIVE_AUTOK
lte_autok_finish = 0;
lte_autok_finish_next = lte_autok_finish + 1;
// KAL_RAWPRINT(("[AUTOK] =======> mtlte_sys_trigger_auto_calibration\n"));
mtlte_sys_trigger_auto_calibration(NULL);
// KAL_RAWPRINT(("lte_autok_finish = %d\n", lte_autok_finish));
while (lte_autok_finish_next != lte_autok_finish){
KAL_SLEEP_MSEC(50);
}
#else
//wait_sdio_autok_ready((void*)lte_dev.sdio_func->card->host);
wait_sdio_autok_ready((void*)lte_dev.sdio_func->card->host, force_autok);
force_autok = 0;
#endif
// KAL_RAWPRINT(("lte_autok_finish = %d\n", lte_autok_finish));
}
#endif
#ifdef MT_LTE_ONLINE_TUNE_SUPPORT
ot_set_dev_sleep_sts((void*)lte_dev.sdio_func->card->host, 0);
ot_dev_wakeup( (void*)lte_dev.sdio_func->card->host );
#endif
mtlte_hif_register_hif_to_sys_wake_callback(mtlte_sys_sdio_kick_thread, 0) ;
mtlte_hif_register_hif_to_sys_sleep_callback(mtlte_sys_sdio_sleep_thread, 0) ;
if ((ret = mtlte_hif_sdio_probe()) != KAL_SUCCESS){
KAL_RAWPRINT(("[PROBE] XXXXXX mt_lte_sdio_probe -mtlte_hif_sdio_probe fail \n"));
goto HIF_PROBE_FAIL ;
}
/* sync with the Device FW */
#if 1
if ((ret = mtlte_hif_sdio_wait_FW_ready()) != KAL_SUCCESS){
KAL_RAWPRINT(("[PROBE] XXXXXX mt_lte_sdio_probe -mtlte_hif_sdio_wait_FW_ready fail \n"));
goto HIF_PROBE_FAIL ;
}
#endif
/* do the data flow layer probing */
if ((ret = mtlte_df_probe()) != KAL_SUCCESS){
KAL_RAWPRINT(("[PROBE] XXXXXX mt_lte_sdio_probe -mtlte_df_probe fail \n"));
goto DF_PROBE_FAIL ;
}
if ((ret = mtlte_expt_probe()) != KAL_SUCCESS){
KAL_RAWPRINT(("[INIT] XXXXXX lte_sdio_driver_init -sdio_register_driver fail \n"));
goto DF_PROBE_FAIL ;
}
KAL_DBGPRINT(KAL, DBG_ERROR,("[%s] set the WPLRCR for NEW FPGA... \n",KAL_FUNC_NAME)) ;
/* Set the Default value of RX MAX Report Num due MT6290 SDIO HW's flexibility */
sdio_func1_rd(SDIO_IP_WHCR, &orig_WHCR, 4);
changed_WHCR = orig_WHCR | RPT_OWN_RX_PACKET_LEN;
sdio_func1_wr(SDIO_IP_WHCR, &changed_WHCR, 4);
sdio_func1_rd(SDIO_IP_WPLRCR, &orig_WPLRCR, 4);
changed_WPLRCR = orig_WPLRCR;
changed_WPLRCR &= (~(RX_RPT_PKT_LEN(0)));
changed_WPLRCR |= MT_LTE_RXQ0_MAX_PKT_REPORT_NUM<<(8*0);
changed_WPLRCR &= (~(RX_RPT_PKT_LEN(1)));
changed_WPLRCR |= MT_LTE_RXQ1_MAX_PKT_REPORT_NUM<<(8*1);
changed_WPLRCR &= (~(RX_RPT_PKT_LEN(2)));
changed_WPLRCR |= MT_LTE_RXQ2_MAX_PKT_REPORT_NUM<<(8*2);
changed_WPLRCR &= (~(RX_RPT_PKT_LEN(3)));
changed_WPLRCR |= MT_LTE_RXQ3_MAX_PKT_REPORT_NUM<<(8*3);
sdio_func1_wr(SDIO_IP_WPLRCR, &changed_WPLRCR, 4);
#if EMCS_SDIO_DRVTST
if ((ret = mtlte_dev_test_probe(LTE_TEST_DEVICE_MINOR, &func->dev)) != KAL_SUCCESS){
KAL_RAWPRINT(("[PROBE] XXXXXX mt_lte_sdio_probe -mtlte_dev_test_probe %d fail \n", LTE_TEST_DEVICE_MINOR));
goto PROBE_TEST_DRV_FAIL ;
}
#endif
/* Sync with FW */
//TODO5:
/* start the kthread */
lte_dev.sdio_thread = kthread_run(mtlte_sys_sdio_thread, <e_dev, "mt_sdio_kthread");
if (IS_ERR(lte_dev.sdio_thread)) {
ret = -EBUSY ;
KAL_RAWPRINT(("[PROBE] XXXXXX mt_lte_sdio_probe -kthread_run fail \n"));
goto CREATE_THREAD_FAIL;
}
/* Enable the SDIO TXRX handle process */
mtlte_hif_sdio_txrx_proc_enable(1) ;
KAL_RAWPRINT(("[PROBE] mtlte_hif_sdio_txrx_proc_enable enalbe it. \n"));
// Test the WHISR read before enable interrupt for 6575 debug
//mtlte_hif_sdio_get_driver_own();
//sdio_func1_rd(SDIO_IP_WHISR, hif_sdio_handler.enh_whisr_cache,sizeof(sdio_whisr_enhance));
/* enable the sdio interrupt service */
if ((ret = mtlte_sys_sdio_setup_irq(func)) != KAL_SUCCESS){
KAL_RAWPRINT(("[PROBE] XXXXXX mt_lte_sdio_probe -mtlte_sys_sdio_setup_irq fail \n"));
goto SETUP_IRQ_FAIL;
}
#ifdef MT_LTE_AUTO_CALIBRATION
mtlte_sdio_probe_done = 1;
#endif
KAL_RAWPRINT(("[PROBE] <======= mt_lte_sdio_probe\n"));
return ret ;
SETUP_IRQ_FAIL:
kthread_stop(lte_dev.sdio_thread);
CREATE_THREAD_FAIL:
#if EMCS_SDIO_DRVTST
mtlte_dev_test_detach(LTE_TEST_DEVICE_MINOR) ;
PROBE_TEST_DRV_FAIL:
#endif
mtlte_df_remove_phase1() ;
mtlte_df_remove_phase2() ;
DF_PROBE_FAIL:
mtlte_hif_sdio_remove_phase1() ;
mtlte_hif_sdio_remove_phase2() ;
HIF_PROBE_FAIL:
sdio_close_device(func) ;
OPEN_FAIL:
KAL_RAWPRINT(("[PROBE FAIL] <======= mt_lte_sdio_probe\n"));
return -ENODEV ;
}
