void padWait(int port)
{
/* Wait for request to complete. */
while(padGetReqState(port, 0) != PAD_RSTAT_COMPLETE)
wait_vsync();
/* Wait for pad to be stable. */
while(padGetState(port, 0) != PAD_STATE_STABLE)
wait_vsync();
}
void test_colors(Raster *r)
/*****************************************************************************
*
****************************************************************************/
{
Rastlib *rlib = r->lib;
short counter;
Vsyncfunc_t wait_vsync;
Colorfunc_t set_colors;
UBYTE cmap[COLORS][CHANNELS];
int i,j;
wait_vsync = rlib->wait_vsync;
set_colors = rlib->set_colors;
log_progress("Testing wait_vsync()...\n");
counter = 30;
while (--counter)
wait_vsync(r);
log_progress("...wait_vsync() testing complete.\n\n");
log_start("Testing set_colors()...\n");
for (j=0; j<CHANNELS; j++)
{
ramp_cmap(cmap, j);
for (i=0; i<COLORS; i+=2)
{
wait_vsync(r);
set_colors(r, 0, COLORS, cmap);
cycle_cmap(cmap);
}
}
log_end("...testing of set_colors() complete.\n\n");
set_default_colors(r);
}
static void redraw(void)
{
float angle = get_msec() / 10.0;
mgl_clear(0);
mgl_clear_depth();
mgl_matrix_mode(MGL_MODELVIEW);
mgl_load_identity();
mgl_translate(0, 0, -cam_zoom);
if(auto_rotate) {
mgl_rotate(angle * 0.5, 1, 0, 0);
mgl_rotate(angle, 0, 0, 1);
} else {
mgl_rotate(cam_phi, 1, 0, 0);
mgl_rotate(cam_theta, 0, 1, 0);
}
switch(prim) {
case TORUS:
mgl_index(green_base);
mgl_torus(1.0, 0.25, 16, 8);
break;
case SPHERE:
mgl_index(blue_base);
mgl_sphere(1.0, 16, 8);
break;
case CUBE:
mgl_index(red_base);
mgl_cube(1.0);
}
if(!auto_rotate) {
draw_cursor(fbuf, 320, 200, mx, my, white_base + grad_range - 1);
}
copy_frame(fbuf);
if(use_vsync) {
wait_vsync();
}
num_frm++;
}
int main(int argc, char **argv)
{
u32 port;
struct padButtonStatus buttons;
int dualshock[2];
int acts[2];
SifInitRpc(0);
printf("libpadx sample");
if((argc == 2) && (strncmp(argv[1], "free", 4) == 0))
{
printf(" - Using PS2SDK freesio2.irx and freepad.irx modules.\n");
loadmodules(1);
}
else
{
printf(" - Using ROM XSIO2MAN and XPADMAN modules.\n");
printf("Start this sample with 'free' as an argument to load freesio2.irx and freepad.irx\n");
printf("Example: ps2client execee host:padx_sample.elf free\n");
loadmodules(0);
}
padInit(0);
padBuf[0] = memalign(64, 256);
padBuf[1] = memalign(64, 256);
old_pad[0] = 0;
old_pad[1] = 0;
portConnected[0] = 0;
portConnected[1] = 0;
dualshock[0] = 0;
dualshock[1] = 0;
acts[0] = 0;
acts[1] = 0;
padPortOpen(0, 0, padBuf[0]);
padPortOpen(1, 0, padBuf[1]);
while(1)
{
for(port=0; port < 2; port++)
{
s32 state = padGetState(port, 0);
if((state == PAD_STATE_STABLE) && (portConnected[port] == 0))
{
u32 i;
u8 mTable[8];
u32 ModeCurId;
u32 ModeCurOffs;
u32 ModeCurExId;
u32 ModeTableNum = padInfoMode(port, 0, PAD_MODETABLE, -1);
printf("Controller (%i) connected\n", port);
/* Check if dualshock and if so, activate analog mode */
for(i = 0; i < ModeTableNum; i++)
mTable[i] = padInfoMode(port, 0, PAD_MODETABLE, i);
/* Works for dualshock2 */
if((mTable[0] == 4) && (mTable[1] == 7) && (ModeTableNum == 2))
dualshock[port] = 1;
/* Active and lock analog mode */
if(dualshock[port] == 1)
{
padSetMainMode(port, 0, PAD_MMODE_DUALSHOCK, PAD_MMODE_LOCK);
padWait(port);
}
ModeCurId = padInfoMode(port, 0, PAD_MODECURID, 0);
ModeCurOffs = padInfoMode(port, 0, PAD_MODECUROFFS, 0);
ModeCurExId = padInfoMode(port, 0, PAD_MODECUREXID, 0);
ModeTableNum = padInfoMode(port, 0, PAD_MODETABLE, -1);
acts[port] = padInfoAct(port, 0, -1, 0);
printf(" ModeCurId : %i (%s)\n", (int)ModeCurId, padTypeStr[ModeCurId]);
printf(" ModeCurExId : %i\n", (int)ModeCurExId);
printf(" ModeTable : ");
for(i = 0; i < ModeTableNum; i++)
{
mTable[i] = padInfoMode(port, 0, PAD_MODETABLE, i);
printf("%i ", (int)mTable[i]);
}
printf("\n");
printf(" ModeTableNum : %i\n", (int)ModeTableNum);
printf(" ModeCurOffs : %i\n", (int)ModeCurOffs);
printf(" NumOfAct : %i\n", (int)acts[port]);
printf(" PressMode : %i\n", (int)padInfoPressMode(port, 0));
if(acts[port] > 0)
{
u8 actAlign[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
u32 i;
/* Set offsets for motor parameters for SetActDirect. */
for(i=0; i < acts[port]; i++)
actAlign[i] = i;
padSetActAlign(port, 0, actAlign);
padWait(port);
}
printf(" EnterPressMode : %i\n", (int)padEnterPressMode(port, 0));
padWait(port);
printf("Ready\n");
portConnected[port] = 1;
}
if((state == PAD_STATE_DISCONN) && (portConnected[port] == 1))
{
printf("Controller (%i) disconnected\n", port);
portConnected[port] = 0;
}
if(portConnected[port] == 1)
{
s32 ret = padRead(port, 0, &buttons);
if(ret != 0)
{
paddata[port] = 0xffff ^ buttons.btns;
new_pad[port] = paddata[port] & ~old_pad[port];
old_pad[port] = paddata[port];
// Values 50 and 200 used because my controllers are worn out :-)
if((buttons.ljoy_h <= 50) || (buttons.ljoy_h >= 200)) printf("Left Analog X: %i\n", (int)buttons.ljoy_h);
if((buttons.ljoy_v <= 50) || (buttons.ljoy_v >= 200)) printf("Left Analog Y: %i\n", (int)buttons.ljoy_v);
if((buttons.rjoy_h <= 50) || (buttons.rjoy_h >= 200)) printf("Right Analog X: %i\n", (int)buttons.rjoy_h);
if((buttons.rjoy_v <= 50) || (buttons.rjoy_v >= 200)) printf("Right Analog Y: %i\n", (int)buttons.rjoy_v);
if(new_pad[port]) printf("Controller (%i) button(s) pressed: ", (int)port);
if(new_pad[port] & PAD_LEFT) printf("LEFT ");
if(new_pad[port] & PAD_RIGHT) printf("RIGHT ");
if(new_pad[port] & PAD_UP) printf("UP ");
if(new_pad[port] & PAD_DOWN) printf("DOWN ");
if(new_pad[port] & PAD_START) printf("START ");
if(new_pad[port] & PAD_SELECT) printf("SELECT ");
if(new_pad[port] & PAD_SQUARE) printf("SQUARE (Pressure: %i) ", (int)buttons.square_p);
if(new_pad[port] & PAD_TRIANGLE) printf("TRIANGLE (Pressure: %i) ", (int)buttons.triangle_p);
if(new_pad[port] & PAD_CIRCLE) printf("CIRCLE (Pressure: %i) ", (int)buttons.circle_p);
if(new_pad[port] & PAD_CROSS) printf("CROSS (Pressure: %i) ", (int)buttons.cross_p);
if(new_pad[port] & PAD_L1)
{
printf("L1 (Start Little Motor) ");
padStartAct(port, 0, 1);
}
if(new_pad[port] & PAD_L2)
{
printf("L2 (Stop Little Motor) ");
padStartAct(port, 0, 0);
}
if(new_pad[port] & PAD_L3) printf("L3 ");
if(new_pad[port] & PAD_R1)
{
printf("R1 (Start Big Motor) ");
padStartAct(port, 1, 255);
}
if(new_pad[port] & PAD_R2)
{
printf("R2 (Stop Big Motor) ");
padStopAct(port, 1);
}
if(new_pad[port] & PAD_R3) printf("R3 ");
if(new_pad[port]) printf("\n");
}
}
}
wait_vsync();
}
return 0;
}
