/* Get wireless statistics. Called by /proc/net/wireless and by SIOCGIWSTATS */
struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
/* we are under RTNL - globally locked - so can use static structs */
static struct iw_statistics wstats;
static struct station_info sinfo;
u8 bssid[ETH_ALEN];
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION)
return NULL;
if (!rdev->ops->get_station)
return NULL;
/* Grab BSSID of current BSS, if any */
wdev_lock(wdev);
if (!wdev->current_bss) {
wdev_unlock(wdev);
return NULL;
}
memcpy(bssid, wdev->current_bss->pub.bssid, ETH_ALEN);
wdev_unlock(wdev);
if (rdev->ops->get_station(&rdev->wiphy, dev, bssid, &sinfo))
return NULL;
memset(&wstats, 0, sizeof(wstats));
switch (rdev->wiphy.signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
if (sinfo.filled & STATION_INFO_SIGNAL) {
int sig = sinfo.signal;
wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
wstats.qual.updated |= IW_QUAL_DBM;
wstats.qual.level = sig;
if (sig < -110)
sig = -110;
else if (sig > -40)
sig = -40;
wstats.qual.qual = sig + 110;
break;
}
case CFG80211_SIGNAL_TYPE_UNSPEC:
if (sinfo.filled & STATION_INFO_SIGNAL) {
wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
wstats.qual.level = sinfo.signal;
wstats.qual.qual = sinfo.signal;
break;
}
default:
wstats.qual.updated |= IW_QUAL_LEVEL_INVALID;
wstats.qual.updated |= IW_QUAL_QUAL_INVALID;
}
wstats.qual.updated |= IW_QUAL_NOISE_INVALID;
return &wstats;
}
void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len)
{
u16 status_code;
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
u8 *ie = mgmt->u.assoc_resp.variable;
int i, ieoffs = offsetof(struct ieee80211_mgmt, u.assoc_resp.variable);
struct cfg80211_internal_bss *bss = NULL;
wdev_lock(wdev);
status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
/*
* This is a bit of a hack, we don't notify userspace of
* a (re-)association reply if we tried to send a reassoc
* and got a reject -- we only try again with an assoc
* frame instead of reassoc.
*/
if (status_code != WLAN_STATUS_SUCCESS && wdev->conn &&
cfg80211_sme_failed_reassoc(wdev))
goto out;
nl80211_send_rx_assoc(rdev, dev, buf, len, GFP_KERNEL);
if (status_code == WLAN_STATUS_SUCCESS) {
for (i = 0; i < MAX_AUTH_BSSES; i++) {
if (!wdev->auth_bsses[i])
continue;
if (memcmp(wdev->auth_bsses[i]->pub.bssid, mgmt->bssid,
ETH_ALEN) == 0) {
bss = wdev->auth_bsses[i];
wdev->auth_bsses[i] = NULL;
/* additional reference to drop hold */
cfg80211_ref_bss(bss);
break;
}
}
/*
* We might be coming here because the driver reported
* a successful association at the same time as the
* user requested a deauth. In that case, we will have
* removed the BSS from the auth_bsses list due to the
* deauth request when the assoc response makes it. If
* the two code paths acquire the lock the other way
* around, that's just the standard situation of a
* deauth being requested while connected.
*/
if (!bss)
goto out;
} else if (wdev->conn) {
cfg80211_sme_failed_assoc(wdev);
/*
* do not call connect_result() now because the
* sme will schedule work that does it later.
*/
goto out;
}
if (!wdev->conn && wdev->sme_state == CFG80211_SME_IDLE) {
/*
* This is for the userspace SME, the CONNECTING
* state will be changed to CONNECTED by
* __cfg80211_connect_result() below.
*/
wdev->sme_state = CFG80211_SME_CONNECTING;
}
/* this consumes one bss reference (unless bss is NULL) */
__cfg80211_connect_result(dev, mgmt->bssid, NULL, 0, ie, len - ieoffs,
status_code,
status_code == WLAN_STATUS_SUCCESS,
bss ? &bss->pub : NULL);
/* drop hold now, and also reference acquired above */
if (bss) {
cfg80211_unhold_bss(bss);
cfg80211_put_bss(&bss->pub);
}
out:
wdev_unlock(wdev);
}
int cfg80211_mgd_wext_siwfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *wextfreq, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
struct ieee80211_channel *chan = NULL;
int err, freq;
/* call only for station! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
return -EINVAL;
freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
if (freq < 0)
return freq;
if (freq) {
chan = ieee80211_get_channel(wdev->wiphy, freq);
if (!chan)
return -EINVAL;
if (chan->flags & IEEE80211_CHAN_DISABLED)
return -EINVAL;
}
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
bool event = true;
if (wdev->wext.connect.channel == chan) {
err = 0;
goto out;
}
/* if SSID set, we'll try right again, avoid event */
if (wdev->wext.connect.ssid_len)
event = false;
err = __cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, event);
if (err)
goto out;
}
wdev->wext.connect.channel = chan;
/* SSID is not set, we just want to switch channel */
if (chan && !wdev->wext.connect.ssid_len) {
err = cfg80211_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT);
goto out;
}
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
}
