void application_start( void )
{
user_dct_data_t* dct;
uint32_t sample_interval;
uint16_t max_sockets = 10;
wiced_init( );
/* Configure device */
wiced_configure_device( app_config );
/* Initialise Xively data. Xively data is shared among multiple threads; therefore a mutex is required */
memset( &xively_data, 0, sizeof( xively_data ) );
wiced_rtos_init_mutex( &xively_data.mutex );
/* Initialise temperature set point. Set point is shared among multiple threads; therefore a mutex is required */
wiced_rtos_init_mutex( &setpoint.mutex );
setpoint.temperature = DEFAULT_SETPOINT;
adjust_setpoint_led_brightness( );
/* Initialise Thermistor */
wiced_adc_init( THERMISTOR_ADC, 5 );
/* Initialise Set Point Control keypad and assigns it's callback function to run on hardware_io_worker_thread's context */
gpio_keypad_enable( &setpoint_control_keypad, WICED_HARDWARE_IO_WORKER_THREAD, setpoint_control_keypad_handler, 250, 2, setpoint_control_key_list );
/* Disable roaming to other access points */
wiced_wifi_set_roam_trigger( -99 ); /* -99dBm ie. extremely low signal level */
/* Bringup the network interface */
wiced_network_up( WICED_STA_INTERFACE, WICED_USE_EXTERNAL_DHCP_SERVER, NULL );
/* Timestamp is needed for sending data to Xively.
* Start automatic time synchronisation and synchronise once every day.
*/
sntp_start_auto_time_sync( 1 * DAYS );
wiced_dct_read_lock( (void**) &dct, WICED_FALSE, DCT_APP_SECTION, 0, sizeof(user_dct_data_t) );
sample_interval = dct->sample_interval;
wiced_dct_read_unlock( dct, WICED_FALSE );
/* Setup timed events that will take a measurement & activate Xively thread to send measurements to Xively */
wiced_rtos_register_timed_event( &xively_timed_event, WICED_NETWORKING_WORKER_THREAD, send_data_to_xively, 10 * SECONDS, 0 );
wiced_rtos_register_timed_event( &temperature_timed_event, WICED_HARDWARE_IO_WORKER_THREAD, take_temperature_reading, sample_interval, 0 );
/* Start web server to display current temperature & setpoint */
wiced_http_server_start( &http_server, 80, max_sockets, web_pages, WICED_STA_INTERFACE, DEFAULT_URL_PROCESSOR_STACK_SIZE );
/* Advertise webpage services using Gedday */
gedday_init( WICED_STA_INTERFACE, "wiced-temp-controller" );
gedday_add_service( "temp_control web server", "_http._tcp.local", 80, 300, "" );
}
void application_start(void)
{
/* Initialise the device and WICED framework */
wiced_init( );
/* Configure the device */
wiced_configure_device( NULL );
/* Bring up the network interface */
wiced_network_up( WICED_STA_INTERFACE, WICED_USE_EXTERNAL_DHCP_SERVER, NULL );
/* Enable MCU powersave. MCU powersave API can be globally DISABLED in <WICED-SDK>/include/wiced_defaults.h */
/* WARNING: Please read the WICED Powersave API documentation before enabling MCU powersave */
//wiced_platform_mcu_enable_powersave();
/* Enable 802.11 powersave mode */
wiced_wifi_enable_powersave_with_throughput( 40 );
/* Register an event that toggles powersave every 2 seconds to
* demonstrate power consumption with & without powersave enabled
*/
wiced_rtos_register_timed_event( &powersave_toggle_event, WICED_HARDWARE_IO_WORKER_THREAD, &powersave_toggle, 2000, 0 );
/* Start web-server */
wiced_http_server_start( &http_server, 80, appliance_web_pages, WICED_STA_INTERFACE );
/* Advertise webpage services using Gedday */
gedday_init( WICED_STA_INTERFACE, "wiced-appliance-app" );
gedday_add_service( "Appliance Webserver", "_http._tcp.local", 80, 300, "" );
}
void application_start(void)
{
wiced_interface_t interface;
wiced_result_t result;
int fail = 0;
wiced_init( );
command_console_init(STDIO_UART, 300, cmdline, 10, history, " ");
console_add_cmd_table(commands);
memset(write_buffer, 0, BUFFER_SIZE);
ws2812_init();
write_ws2812(0, 3, init_data);
wiced_network_register_link_callback(link_cb_up, link_cb_down, WICED_STA_INTERFACE);
result = wiced_network_up_default( &interface, NULL);
// result = wiced_network_up(WICED_STA_INTERFACE, WICED_USE_EXTERNAL_DHCP_SERVER, NULL);
if( result != WICED_SUCCESS ) {
printf("Bringing up network interface failed !\r\n");
fail = 1;
}
/* Create UDP socket */
if (wiced_udp_create_socket(&udp_socket, PORTNUM, interface) != WICED_SUCCESS) {
WPRINT_APP_INFO( ("UDP socket creation failed\n") );
fail = 1;
} else {
// wiced_udp_register_callbacks(&udp_socket, udp_cb, &udp_socket);
wiced_rtos_register_timed_event( &process_udp_rx_event, WICED_NETWORKING_WORKER_THREAD, &process_received_udp_packet, (1*SECONDS)/50, 0 );
}
if(!fail){
init_data[0] = 0x10;
init_data[1] = 0x00;
init_data[2] = 0x00;
} else {
init_data[0] = 0x00;
init_data[1] = 0x10;
init_data[2] = 0x00;
}
write_ws2812(0, 3, init_data);
}