static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
{
int ret;
u32 vector;
bool beacon_loss = false;
wl1271_event_mbox_dump(mbox);
vector = le32_to_cpu(mbox->events_vector);
vector &= ~(le32_to_cpu(mbox->events_mask));
wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
if (vector & SCAN_COMPLETE_EVENT_ID) {
ret = wl1271_event_scan_complete(wl, mbox);
if (ret < 0)
return ret;
}
/*
* The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
* filtering) is enabled. Without PSM, the stack will receive all
* beacons and can detect beacon loss by itself.
*
* As there's possibility that the driver disables PSM before receiving
* BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
*
*/
if (vector & BSS_LOSE_EVENT_ID) {
wl1271_info("Beacon loss detected.");
/* indicate to the stack, that beacons have been lost */
beacon_loss = true;
}
if (vector & PS_REPORT_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
if (ret < 0)
return ret;
}
if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
if (wl->vif)
wl1271_event_rssi_trigger(wl, mbox);
}
if (wl->vif && beacon_loss)
ieee80211_connection_loss(wl->vif);
return 0;
}
static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
{
int ret;
u32 vector;
bool beacon_loss = false;
wl1271_event_mbox_dump(mbox);
vector = le32_to_cpu(mbox->events_vector);
vector &= ~(le32_to_cpu(mbox->events_mask));
wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
if (vector & SCAN_COMPLETE_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "status: 0x%x",
mbox->scheduled_scan_status);
wl1271_scan_stm(wl);
}
/* disable dynamic PS when requested by the firmware */
if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
wl->bss_type == BSS_TYPE_STA_BSS) {
if (mbox->soft_gemini_sense_info)
ieee80211_disable_dyn_ps(wl->vif);
else
ieee80211_enable_dyn_ps(wl->vif);
}
/*
* The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
* filtering) is enabled. Without PSM, the stack will receive all
* beacons and can detect beacon loss by itself.
*
* As there's possibility that the driver disables PSM before receiving
* BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
*
*/
if (vector & BSS_LOSE_EVENT_ID) {
wl1271_info("Beacon loss detected.");
/* indicate to the stack, that beacons have been lost */
beacon_loss = true;
}
if (vector & PS_REPORT_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
if (ret < 0)
return ret;
}
if (vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID)
wl1271_event_pspoll_delivery_fail(wl);
if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
if (wl->vif)
wl1271_event_rssi_trigger(wl, mbox);
}
if (wl->vif && beacon_loss)
ieee80211_connection_loss(wl->vif);
return 0;
}
static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
{
int ret;
u32 vector;
bool beacon_loss = false;
bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS);
bool disconnect_sta = false;
unsigned long sta_bitmap = 0;
wl1271_event_mbox_dump(mbox);
vector = le32_to_cpu(mbox->events_vector);
vector &= ~(le32_to_cpu(mbox->events_mask));
wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
if (vector & SCAN_COMPLETE_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "status: 0x%x",
mbox->scheduled_scan_status);
wl1271_scan_stm(wl);
}
if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT "
"(status 0x%0x)", mbox->scheduled_scan_status);
wl1271_scan_sched_scan_results(wl);
}
if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT "
"(status 0x%0x)", mbox->scheduled_scan_status);
if (wl->sched_scanning) {
ieee80211_sched_scan_stopped(wl->hw);
wl->sched_scanning = false;
}
}
if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
wl->bss_type == BSS_TYPE_STA_BSS)
wl12xx_event_soft_gemini_sense(wl,
mbox->soft_gemini_sense_info);
if (vector & CHANGE_AUTO_MODE_TIMEOUT_EVENT_ID &&
wl->bss_type == BSS_TYPE_STA_BSS) {
int timeout = 0;
if (mbox->change_auto_mode_timeout)
timeout = 500;
ieee80211_set_dyn_ps_timeout(wl->vif, timeout);
}
/*
* The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
* filtering) is enabled. Without PSM, the stack will receive all
* beacons and can detect beacon loss by itself.
*
* As there's possibility that the driver disables PSM before receiving
* BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
*
*/
if ((vector & BSS_LOSE_EVENT_ID) && !is_ap) {
wl1271_info("Beacon loss detected.");
/* indicate to the stack, that beacons have been lost */
beacon_loss = true;
}
if ((vector & PS_REPORT_EVENT_ID) && !is_ap) {
wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
if (ret < 0)
return ret;
}
if ((vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID) && !is_ap)
wl1271_event_pspoll_delivery_fail(wl);
if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
if (wl->vif)
wl1271_event_rssi_trigger(wl, mbox);
}
if ((vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID)) {
wl1271_debug(DEBUG_EVENT, "BA_SESSION_RX_CONSTRAINT_EVENT_ID. "
"ba_allowed = 0x%x", mbox->rx_ba_allowed);
wl->ba_allowed = !!mbox->rx_ba_allowed;
if (wl->vif && !wl->ba_allowed)
wl1271_stop_ba_event(wl);
}
if ((vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) && !is_ap) {
wl1271_debug(DEBUG_EVENT, "CHANNEL_SWITCH_COMPLETE_EVENT_ID. "
"channel_switch_status = 0x%x",
mbox->channel_switch_status);
/*
* That event uses for two cases:
* 1) channel switch complete with channel_switch_status=0
* 2) fixing beacon actual TSF with channel_switch_status=1
* calling chswitch_done only for the first option
*/
if (!mbox->channel_switch_status &&
test_and_clear_bit(WL1271_FLAG_CS_PROGRESS, &wl->flags) &&
(wl->vif))
ieee80211_chswitch_done(wl->vif, true);
}
if ((vector & DUMMY_PACKET_EVENT_ID)) {
wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID");
if (wl->vif)
wl1271_tx_dummy_packet(wl);
}
if (vector & DISCONNECT_EVENT_COMPLETE_ID)
wl1271_debug(DEBUG_EVENT, "disconnect event");
/*
* "TX retries exceeded" has a different meaning according to mode.
* In AP mode the offending station is disconnected.
*/
if ((vector & MAX_TX_RETRY_EVENT_ID) && is_ap) {
wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID");
sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded);
disconnect_sta = true;
}
if ((vector & INACTIVE_STA_EVENT_ID) && is_ap) {
wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID");
sta_bitmap |= le16_to_cpu(mbox->sta_aging_status);
disconnect_sta = true;
}
if (is_ap && disconnect_sta) {
u32 num_packets = wl->conf.tx.max_tx_retries;
struct ieee80211_sta *sta;
const u8 *addr;
int h;
for (h = find_first_bit(&sta_bitmap, AP_MAX_LINKS);
h < AP_MAX_LINKS;
h = find_next_bit(&sta_bitmap, AP_MAX_LINKS, h+1)) {
if (!wl1271_is_active_sta(wl, h))
continue;
addr = wl->links[h].addr;
rcu_read_lock();
sta = ieee80211_find_sta(wl->vif, addr);
if (sta) {
wl1271_debug(DEBUG_EVENT, "remove sta %d", h);
ieee80211_report_low_ack(sta, num_packets);
}
rcu_read_unlock();
}
}
if (wl->vif && beacon_loss)
ieee80211_connection_loss(wl->vif);
return 0;
}
static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
{
int ret;
u32 vector;
bool beacon_loss = false;
bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS);
bool disconnect_sta = false;
unsigned long sta_bitmap = 0;
wl1271_event_mbox_dump(mbox);
vector = le32_to_cpu(mbox->events_vector);
vector &= ~(le32_to_cpu(mbox->events_mask));
wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
if (vector & SCAN_COMPLETE_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "status: 0x%x",
mbox->scheduled_scan_status);
wl1271_scan_stm(wl);
}
/* disable dynamic PS when requested by the firmware */
if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
wl->bss_type == BSS_TYPE_STA_BSS) {
if (mbox->soft_gemini_sense_info)
ieee80211_disable_dyn_ps(wl->vif);
else
ieee80211_enable_dyn_ps(wl->vif);
}
/*
* The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
* filtering) is enabled. Without PSM, the stack will receive all
* beacons and can detect beacon loss by itself.
*
* As there's possibility that the driver disables PSM before receiving
* BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
*
*/
if ((vector & BSS_LOSE_EVENT_ID) && !is_ap) {
wl1271_info("Beacon loss detected.");
/* indicate to the stack, that beacons have been lost */
beacon_loss = true;
}
if ((vector & PS_REPORT_EVENT_ID) && !is_ap) {
wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
if (ret < 0)
return ret;
}
if ((vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID) && !is_ap)
wl1271_event_pspoll_delivery_fail(wl);
if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
if (wl->vif)
wl1271_event_rssi_trigger(wl, mbox);
}
if ((vector & DUMMY_PACKET_EVENT_ID) && !is_ap) {
wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID");
if (wl->vif)
wl1271_tx_dummy_packet(wl);
}
/*
* "TX retries exceeded" has a different meaning according to mode.
* In AP mode the offending station is disconnected. In STA mode we
* report connection loss.
*/
if (vector & MAX_TX_RETRY_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID");
if (is_ap) {
sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded);
disconnect_sta = true;
} else {
beacon_loss = true;
}
}
if ((vector & INACTIVE_STA_EVENT_ID) && is_ap) {
wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID");
sta_bitmap |= le16_to_cpu(mbox->sta_aging_status);
disconnect_sta = true;
}
if (wl->vif && beacon_loss)
ieee80211_connection_loss(wl->vif);
if (is_ap && disconnect_sta) {
u32 num_packets = wl->conf.tx.max_tx_retries;
struct ieee80211_sta *sta;
const u8 *addr;
int h;
for (h = find_first_bit(&sta_bitmap, AP_MAX_LINKS);
h < AP_MAX_LINKS;
h = find_next_bit(&sta_bitmap, AP_MAX_LINKS, h+1)) {
if (!wl1271_is_active_sta(wl, h))
continue;
addr = wl->links[h].addr;
rcu_read_lock();
sta = ieee80211_find_sta(wl->vif, addr);
if (sta) {
wl1271_debug(DEBUG_EVENT, "remove sta %d", h);
#if 0
ieee80211_report_low_ack(sta, num_packets);
#endif
}
rcu_read_unlock();
}
}
return 0;
}