/*-----------------------------------------------------------------------------
* Function: PHY_RF6052SetOFDMTxPower
*
* Overview: For legacy and HY OFDM, we must read EEPROM TX power index for
* different channel and read original value in TX power register area from
* 0xe00. We increase offset and original value to be correct tx pwr.
*
* Input: NONE
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 11/05/2008 MHC Simulate 8192 series method.
* 01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to
* A/B pwr difference or legacy/HT pwr diff.
* 2. We concern with path B legacy/HT OFDM difference.
* 01/22/2009 MHC Support new EPRO format from SD3.
*
*---------------------------------------------------------------------------*/
void rtl8723a_PHY_RF6052SetOFDMTxPower(struct rtw_adapter *Adapter, u8 *pPowerLevel, u8 Channel)
{
u32 writeVal[2], powerBase0[2], powerBase1[2];
u8 index = 0;
getPowerBase(Adapter, pPowerLevel, Channel, &powerBase0[0], &powerBase1[0]);
for (index = 0; index < 6; index++) {
getTxPowerWriteValByRegulatory(Adapter, Channel, index,
&powerBase0[0], &powerBase1[0], &writeVal[0]);
writeOFDMPowerReg(Adapter, index, &writeVal[0]);
}
}
/******************************************************************************
* Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <*****@*****.**>
******************************************************************************/
// ****************************************************************************
//
// History:
// Data Who Remark
//
// 09/25/2008 MHC Create initial version.
// 11/05/2008 MHC Add API for tw power setting.
//
//
// ***************************************************************************/
#include "r8192U.h"
#include "r8192S_rtl6052.h"
#ifdef RTL8192SU
#include "r8192S_hw.h"
#include "r8192S_phyreg.h"
#include "r8192S_phy.h"
#else
#include "r8192U_hw.h"
#include "r819xU_phyreg.h"
#include "r819xU_phy.h"
#endif
//---------------------------Define Local Constant---------------------------*/
// Define local structure for debug!!!!!
typedef struct RF_Shadow_Compare_Map {
// Shadow register value
u32 Value;
// Compare or not flag
u8 Compare;
// Record If it had ever modified unpredicted
u8 ErrorOrNot;
// Recorver Flag
u8 Recorver;
//
u8 Driver_Write;
}RF_SHADOW_T;
//---------------------------Define Local Constant---------------------------*/
//------------------------Define global variable-----------------------------*/
//------------------------Define global variable-----------------------------*/
//---------------------Define local function prototype-----------------------*/
void phy_RF6052_Config_HardCode(struct net_device* dev);
RT_STATUS phy_RF6052_Config_ParaFile(struct net_device* dev);
//---------------------Define local function prototype-----------------------*/
//------------------------Define function prototype--------------------------*/
extern void RF_ChangeTxPath(struct net_device* dev, u16 DataRate);
//------------------------Define function prototype--------------------------*/
//------------------------Define local variable------------------------------*/
// 2008/11/20 MH For Debug only, RF
static RF_SHADOW_T RF_Shadow[RF6052_MAX_PATH][RF6052_MAX_REG];// = {{0}};//FIXLZM
//------------------------Define local variable------------------------------*/
//------------------------Define function prototype--------------------------*/
//-----------------------------------------------------------------------------
// Function: RF_ChangeTxPath
//
// Overview: For RL6052, we must change some RF settign for 1T or 2T.
//
// Input: u16 DataRate // 0x80-8f, 0x90-9f
//
// Output: NONE
//
// Return: NONE
//
// Revised History:
// When Who Remark
// 09/25/2008 MHC Create Version 0.
// Firmwaer support the utility later.
//
//---------------------------------------------------------------------------*/
extern void RF_ChangeTxPath(struct net_device* dev, u16 DataRate)
{
// We do not support gain table change inACUT now !!!! Delete later !!!
#if 0//(RTL92SE_FPGA_VERIFY == 0)
static u1Byte RF_Path_Type = 2; // 1 = 1T 2= 2T
static u4Byte tx_gain_tbl1[6]
= {0x17f50, 0x11f40, 0x0cf30, 0x08720, 0x04310, 0x00100};
static u4Byte tx_gain_tbl2[6]
= {0x15ea0, 0x10e90, 0x0c680, 0x08250, 0x04040, 0x00030};
u1Byte i;
if (RF_Path_Type == 2 && (DataRate&0xF) <= 0x7)
{
// Set TX SYNC power G2G3 loop filter
PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
RF_TXPA_G2, bMask20Bits, 0x0f000);
PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
RF_TXPA_G3, bMask20Bits, 0xeacf1);
// Change TX AGC gain table
for (i = 0; i < 6; i++)
PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
RF_TX_AGC, bMask20Bits, tx_gain_tbl1[i]);
// Set PA to high value
PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
RF_TXPA_G2, bMask20Bits, 0x01e39);
}
else if (RF_Path_Type == 1 && (DataRate&0xF) >= 0x8)
{
// Set TX SYNC power G2G3 loop filter
PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
RF_TXPA_G2, bMask20Bits, 0x04440);
PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
RF_TXPA_G3, bMask20Bits, 0xea4f1);
// Change TX AGC gain table
for (i = 0; i < 6; i++)
PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
RF_TX_AGC, bMask20Bits, tx_gain_tbl2[i]);
// Set PA low gain
PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
RF_TXPA_G2, bMask20Bits, 0x01e19);
}
#endif
} // RF_ChangeTxPath */
//-----------------------------------------------------------------------------
// Function: PHY_RF6052SetBandwidth()
//
// Overview: This function is called by SetBWModeCallback8190Pci() only
//
// Input: PADAPTER Adapter
// WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M
//
// Output: NONE
//
// Return: NONE
//
// Note: For RF type 0222D
//---------------------------------------------------------------------------*/
void PHY_RF6052SetBandwidth(struct net_device* dev, HT_CHANNEL_WIDTH Bandwidth) //20M or 40M
{
struct r8192_priv *priv = rtllib_priv(dev);
#ifdef RTL8192SU //YJ,test,090113
//if (IS_HARDWARE_TYPE_8192S(dev))
{
switch(Bandwidth)
{
case HT_CHANNEL_WIDTH_20:
priv->RfRegChnlVal[0] = ((priv->RfRegChnlVal[0] & 0xfffff3ff) | 0x0400);
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, RF_CHNLBW, bRFRegOffsetMask, priv->RfRegChnlVal[0]);
break;
case HT_CHANNEL_WIDTH_20_40:
priv->RfRegChnlVal[0] = ((priv->RfRegChnlVal[0] & 0xfffff3ff));
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, RF_CHNLBW, bRFRegOffsetMask, priv->RfRegChnlVal[0]);
break;
default:
RT_TRACE(COMP_DBG, "PHY_SetRF6052Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth);
break;
}
}
// else
#else
u8 eRFPath;
{
for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
{
switch(Bandwidth)
{
case HT_CHANNEL_WIDTH_20:
//PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x01);
break;
case HT_CHANNEL_WIDTH_20_40:
//PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x00);
break;
default:
RT_TRACE(COMP_DBG, "PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth );
break;
}
}
}
#endif
}
//-----------------------------------------------------------------------------
// Function: PHY_RF6052SetCckTxPower
//
// Overview:
//
// Input: NONE
//
// Output: NONE
//
// Return: NONE
//
// Revised History:
// When Who Remark
// 11/05/2008 MHC Simulate 8192series..
//
//---------------------------------------------------------------------------*/
extern void PHY_RF6052SetCckTxPower(struct net_device* dev, u8 powerlevel)
{
struct r8192_priv *priv = rtllib_priv(dev);
u32 TxAGC=0;
bool TurboScanOff=false;
if ((priv->EEPROMVersion >= 2) && (priv->EEPROMRegulatory != 0))
TurboScanOff = true;
if(priv->rtllib->scanning == 1 || priv->rtllib->be_scan_inprogress == true)
TxAGC = 0x3f;
else
TxAGC = powerlevel;
if(TurboScanOff)
TxAGC = powerlevel;
//cosa add for lenovo, to pass the safety spec, don't increase power index for different rates.
if(priv->bIgnoreDiffRateTxPowerOffset)
TxAGC = powerlevel;
if(TxAGC > RF6052_MAX_TX_PWR)
TxAGC = RF6052_MAX_TX_PWR;
//printk("CCK PWR= %x\n", TxAGC);
rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
} /* PHY_RF6052SetCckTxPower */
//
// powerbase0 for OFDM rates
// powerbase1 for HT MCS rates
//
void getPowerBase(
struct net_device* dev,
u8* pPowerLevel,
u8 Channel,
u32* OfdmBase,
u32* MCSBase,
u8* pFinalPowerIndex
)
{
struct r8192_priv *priv = rtllib_priv(dev);
u32 powerBase0, powerBase1;
u32 Legacy_pwrdiff=0, HT20_pwrdiff=0;
u8 i, powerlevel[4];
for(i=0; i<2; i++)
powerlevel[i] = pPowerLevel[i];
// We only care about the path A for legacy.
if (priv->EEPROMVersion < 2)
powerBase0 = powerlevel[0] + (priv->LegacyHTTxPowerDiff & 0xf);
else if (priv->EEPROMVersion >= 2)
{
Legacy_pwrdiff = priv->TxPwrLegacyHtDiff[RF90_PATH_A][Channel-1];
// For legacy OFDM, tx pwr always > HT OFDM pwr. We do not care Path B
// legacy OFDM pwr diff. NO BB register to notify HW.
powerBase0 = powerlevel[0] + Legacy_pwrdiff;
//RTPRINT(FPHY, PHY_TXPWR, (" [LagacyToHT40 pwr diff = %d]\n", Legacy_pwrdiff));
}
powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0;
*OfdmBase = powerBase0;
//printk(" [OFDM power base index = 0x%lx]\n", powerBase0);
//MCS rates
if(priv->EEPROMVersion >= 2)
{
//Check HT20 to HT40 diff
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
{
for(i=0; i<2; i++) // rf-A, rf-B
{ // HT 20<->40 pwr diff
HT20_pwrdiff = priv->TxPwrHt20Diff[i][Channel-1];
if (HT20_pwrdiff < 8) // 0~+7
powerlevel[i] += HT20_pwrdiff;
else // index8-15=-8~-1
powerlevel[i] -= (16-HT20_pwrdiff);
//RTPRINT(FPHY, PHY_TXPWR, (" [HT20 to HT40 pwrdiff = %d]\n", HT20_pwrdiff));
}
}
}
powerBase1 = powerlevel[0]; //use index of rf-A
powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1;
*MCSBase = powerBase1;
//printk(" [MCS power base index = 0x%x]\n", powerBase1);
//RTPRINT(FPHY, PHY_TXPWR, (" [Legacy/HT power index= %lx/%lx]\n", powerBase0, powerBase1));
//The following is for Antenna diff from Ant-B to Ant-A
pFinalPowerIndex[0] = powerlevel[0];
pFinalPowerIndex[1] = powerlevel[1];
switch(priv->EEPROMRegulatory)
{
case 3:
//The following is for calculation of the power diff for Ant-B to Ant-A.
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
{
pFinalPowerIndex[0] += priv->PwrGroupHT40[RF90_PATH_A][Channel-1];
pFinalPowerIndex[1] += priv->PwrGroupHT40[RF90_PATH_B][Channel-1];
}
else
{
pFinalPowerIndex[0] += priv->PwrGroupHT20[RF90_PATH_A][Channel-1];
pFinalPowerIndex[1] += priv->PwrGroupHT20[RF90_PATH_B][Channel-1];
}
break;
default:
break;
}
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
{
RT_TRACE(COMP_RF, "40MHz finalPowerIndex (A / B) = 0x%x / 0x%x\n", pFinalPowerIndex[0], pFinalPowerIndex[1]);
}
else
{
RT_TRACE(COMP_RF, "20MHz finalPowerIndex (A / B) = 0x%x / 0x%x\n", pFinalPowerIndex[0], pFinalPowerIndex[1]);
}
}
void getTxPowerWriteValByRegulatory(
struct net_device* dev,
u8 Channel,
u8 index,
u32 powerBase0,
u32 powerBase1,
u32* pOutWriteVal
)
{
struct r8192_priv *priv = rtllib_priv(dev);
//u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
u8 i, chnlGroup = 0, pwr_diff_limit[4];
u32 writeVal, customer_limit;
//
// Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate
//
switch(priv->EEPROMRegulatory)
{
case 0: // Realtek better performance
// increase power diff defined by Realtek for large power
chnlGroup = 0;
//RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n",
// chnlGroup, index, priv->MCSTxPowerLevelOriginalOffset[chnlGroup][index]));
writeVal = priv->MCSTxPowerLevelOriginalOffset[chnlGroup][index] +
((index<2)?powerBase0:powerBase1);
//RTPRINT(FPHY, PHY_TXPWR, ("RTK better performance, writeVal = 0x%x\n", writeVal));
break;
case 1: // Realtek regulatory
// increase power diff defined by Realtek for regulatory
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
{
writeVal = ((index<2)?powerBase0:powerBase1);
//RTPRINT(FPHY, PHY_TXPWR, ("Realtek regulatory, 40MHz, writeVal = 0x%x\n", writeVal));
}
else
{
if(priv->pwrGroupCnt == 1)
chnlGroup = 0;
if(priv->pwrGroupCnt >= 3)
{
if(Channel <= 3)
chnlGroup = 0;
else if(Channel >= 4 && Channel <= 8)
chnlGroup = 1;
else if(Channel > 8)
chnlGroup = 2;
if(priv->pwrGroupCnt == 4)
chnlGroup++;
}
//RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n",
//chnlGroup, index, priv->MCSTxPowerLevelOriginalOffset[chnlGroup][index]));
writeVal = priv->MCSTxPowerLevelOriginalOffset[chnlGroup][index] +
((index<2)?powerBase0:powerBase1);
//RTPRINT(FPHY, PHY_TXPWR, ("Realtek regulatory, 20MHz, writeVal = 0x%x\n", writeVal));
}
break;
case 2: // Better regulatory
// don't increase any power diff
writeVal = ((index<2)?powerBase0:powerBase1);
//RTPRINT(FPHY, PHY_TXPWR, ("Better regulatory, writeVal = 0x%x\n", writeVal));
break;
case 3: // Customer defined power diff.
// increase power diff defined by customer.
chnlGroup = 0;
//RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n",
// chnlGroup, index, priv->MCSTxPowerLevelOriginalOffset[chnlGroup][index]));
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
{
//RTPRINT(FPHY, PHY_TXPWR, ("customer's limit, 40MHz = 0x%x\n",
// priv->PwrGroupHT40[RF90_PATH_A][Channel-1]));
}
else
{
//RTPRINT(FPHY, PHY_TXPWR, ("customer's limit, 20MHz = 0x%x\n",
// priv->PwrGroupHT20[RF90_PATH_A][Channel-1]));
}
for (i=0; i<4; i++)
{
pwr_diff_limit[i] = (u8)((priv->MCSTxPowerLevelOriginalOffset[chnlGroup][index]&(0x7f<<(i*8)))>>(i*8));
//RTPRINT(FPHY, PHY_TXPWR, ("pwr_diff_limit[%d] = 0x%x\n", i, pwr_diff_limit[i]));
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
{
if(pwr_diff_limit[i] > priv->PwrGroupHT40[RF90_PATH_A][Channel-1])
{
pwr_diff_limit[i] = priv->PwrGroupHT40[RF90_PATH_A][Channel-1];
//RTPRINT(FPHY, PHY_TXPWR, ("Use customer's limit, 40MHz, pwr_diff_limit[%d] = 0x%x\n", i, pwr_diff_limit[i]));
}
}
else
{
if(pwr_diff_limit[i] > priv->PwrGroupHT20[RF90_PATH_A][Channel-1])
{
pwr_diff_limit[i] = priv->PwrGroupHT20[RF90_PATH_A][Channel-1];
//RTPRINT(FPHY, PHY_TXPWR, ("Use customer's limit, 20MHz, pwr_diff_limit[%d] = 0x%x\n", i, pwr_diff_limit[i]));
}
}
}
customer_limit = (pwr_diff_limit[3]<<24) | (pwr_diff_limit[2]<<16) |
(pwr_diff_limit[1]<<8) | (pwr_diff_limit[0]);
//RTPRINT(FPHY, PHY_TXPWR, ("Customer's limit = 0x%x\n", customer_limit));
writeVal = customer_limit + ((index<2)?powerBase0:powerBase1);
//RTPRINT(FPHY, PHY_TXPWR, ("Customer, writeVal = 0x%x\n", writeVal));
break;
default:
chnlGroup = 0;
writeVal = priv->MCSTxPowerLevelOriginalOffset[chnlGroup][index] +
((index<2)?powerBase0:powerBase1);
//RTPRINT(FPHY, PHY_TXPWR, ("RTK better performance, writeVal = 0x%x\n", writeVal));
break;
}
*pOutWriteVal = writeVal;
//RTPRINT(FPHY, PHY_TXPWR, ("Reg 0x%x, chnlGroup = %d, Original=%x writeVal=%x\n",
//RegOffset[index], chnlGroup, pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index],
//writeVal));
}
void setAntennaDiff(
struct net_device* dev,
u8* pFinalPowerIndex
)
{
struct r8192_priv *priv = rtllib_priv(dev);
s8 ant_pwr_diff=0;
u32 u4RegValue=0;
if (priv->rf_type== RF_2T2R)
{
ant_pwr_diff = pFinalPowerIndex[1] - pFinalPowerIndex[0];
// range is from 7~-8, index = 0x0~0xf
if(ant_pwr_diff > 7)
ant_pwr_diff = 7;
if(ant_pwr_diff < -8)
ant_pwr_diff = -8;
//RTPRINT(FPHY, PHY_TXPWR, ("Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
// ant_pwr_diff, ant_pwr_diff&0xf));
ant_pwr_diff &= 0xf;
}
// Antenna TX power difference
priv->AntennaTxPwDiff[2] = 0;// RF-D, don't care
priv->AntennaTxPwDiff[1] = 0;// RF-C, don't care
priv->AntennaTxPwDiff[0] = (u8)(ant_pwr_diff); // RF-B
//RTPRINT(FPHY, PHY_TXPWR, ("Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
//ant_pwr_diff, pHalData->AntennaTxPwDiff[0]));
u4RegValue = (priv->AntennaTxPwDiff[2]<<8 |
priv->AntennaTxPwDiff[1]<<4 |
priv->AntennaTxPwDiff[0] );
rtl8192_setBBreg(dev, rFPGA0_TxGainStage,
(bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue);
//RTPRINT(FPHY, PHY_TXPWR, ("Write BCD-Diff(0x%x) = 0x%lx\n",
// rFPGA0_TxGainStage, u4RegValue));
}
void writeOFDMPowerReg(
struct net_device* dev,
u8 index,
u32 Value
)
{
struct r8192_priv *priv = rtllib_priv(dev);
u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
u8 i, rfa_pwr[4];
u8 rfa_lower_bound = 0, rfa_upper_bound = 0, rf_pwr_diff = 0;
u32 writeVal=Value;
//
// If path A and Path B coexist, we must limit Path A tx power.
// Protect Path B pwr over or under flow. We need to calculate upper and
// lower bound of path A tx power.
//
if (priv->rf_type == RF_2T2R)
{
rf_pwr_diff = priv->AntennaTxPwDiff[0];
//RTPRINT(FPHY, PHY_TXPWR, ("2T2R RF-B to RF-A PWR DIFF=%d\n", rf_pwr_diff));
if (rf_pwr_diff >= 8) // Diff=-8~-1
{ // Prevent underflow!!
rfa_lower_bound = 0x10-rf_pwr_diff;
//printk("rfa_lower_bound= %d\n", rfa_lower_bound);
}
else if (rf_pwr_diff >= 0) // Diff = 0-7
{
rfa_upper_bound = RF6052_MAX_TX_PWR-rf_pwr_diff;
//printk("rfa_upper_bound= %d\n", rfa_upper_bound);
}
}
for (i=0; i<4; i++)
{
rfa_pwr[i] = (u8)((writeVal & (0x7f<<(i*8)))>>(i*8));
if (rfa_pwr[i] > RF6052_MAX_TX_PWR)
rfa_pwr[i] = RF6052_MAX_TX_PWR;
//
// If path A and Path B coexist, we must limit Path A tx power.
// Protect Path B pwr over or under flow. We need to calculate upper and
// lower bound of path A tx power.
//
if (priv->rf_type== RF_2T2R)
{
if (rf_pwr_diff >= 8) // Diff=-8~-1
{ // Prevent underflow!!
if (rfa_pwr[i] <rfa_lower_bound)
{
//printk("Underflow");
rfa_pwr[i] = rfa_lower_bound;
}
}
else if (rf_pwr_diff >= 1) // Diff = 0-7
{ // Prevent overflow
if (rfa_pwr[i] > rfa_upper_bound)
{
//printk("Overflow");
rfa_pwr[i] = rfa_upper_bound;
}
}
//printk("rfa_pwr[%d]=%x\n", i, rfa_pwr[i]);
}
}
writeVal = (rfa_pwr[3]<<24) | (rfa_pwr[2]<<16) |(rfa_pwr[1]<<8) |rfa_pwr[0];
rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
//printk("Set 0x%x = %08x\n",RegOffset[index], writeVal);
}
//-----------------------------------------------------------------------------
// Function: PHY_RF6052SetOFDMTxPower
//
// Overview: For legacy and HY OFDM, we must read EEPROM TX power index for
// different channel and read original value in TX power register area from
// 0xe00. We increase offset and original value to be correct tx pwr.
//
// Input: NONE
//
// Output: NONE
//
// Return: NONE
//
// Revised History:
// When Who Remark
// 11/05/2008 MHC Simulate 8192 series method.
//01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to
// A/B pwr difference or legacy/HT pwr diff.
// 2. We concern with path B legacy/HT OFDM difference.
// 01/22/2009 MHC Support new EPRO format from SD3.
//---------------------------------------------------------------------------*/
extern void PHY_RF6052SetOFDMTxPower(struct net_device* dev, u8* pPowerLevel, u8 Channel)
{
u32 writeVal, powerBase0, powerBase1;
u8 index = 0;
u8 finalPowerIndex[4];
getPowerBase(dev, pPowerLevel, Channel, &powerBase0, &powerBase1, &finalPowerIndex[0]);
setAntennaDiff(dev, &finalPowerIndex[0] );
for(index=0; index<6; index++)
{
getTxPowerWriteValByRegulatory(dev, Channel, index,
powerBase0, powerBase1, &writeVal);
writeOFDMPowerReg(dev, index, writeVal);
}
} /* PHY_RF6052SetOFDMTxPower */
/*-----------------------------------------------------------------------------
* Function: PHY_RF6052SetOFDMTxPower
*
* Overview: For legacy and HY OFDM, we must read EEPROM TX power index for
* different channel and read original value in TX power register area from
* 0xe00. We increase offset and original value to be correct tx pwr.
*
* Input: NONE
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 11/05/2008 MHC Simulate 8192 series method.
* 01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to
* A/B pwr difference or legacy/HT pwr diff.
* 2. We concern with path B legacy/HT OFDM difference.
* 01/22/2009 MHC Support new EPRO format from SD3.
*
*---------------------------------------------------------------------------*/
extern void
PHY_RF6052SetOFDMTxPower(
struct net_device* dev,
u8* pPowerLevel,
u8 Channel)
{
u32 writeVal[2], powerBase0[2], powerBase1[2];
u8 index = 0;
getPowerBase(dev, pPowerLevel, Channel, &powerBase0[0], &powerBase1[0]);
for(index=0; index<6; index++)
{
getTxPowerWriteValByRegulatory(dev, Channel, index,
&powerBase0[0], &powerBase1[0], &writeVal[0]);
writeOFDMPowerReg(dev, index, &writeVal[0]);
}
}
/*-----------------------------------------------------------------------------
* Function: PHY_RF6052SetOFDMTxPower
*
* Overview: For legacy and HY OFDM, we must read EEPROM TX power index for
* different channel and read original value in TX power register area from
* 0xe00. We increase offset and original value to be correct tx pwr.
*
* Input: NONE
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 11/05/2008 MHC Simulate 8192 series method.
* 01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to
* A/B pwr difference or legacy/HT pwr diff.
* 2. We concern with path B legacy/HT OFDM difference.
* 01/22/2009 MHC Support new EPRO format from SD3.
*
*---------------------------------------------------------------------------*/
VOID
rtl8192c_PHY_RF6052SetOFDMTxPower(
IN PADAPTER Adapter,
IN u8* pPowerLevel,
IN u8 Channel)
{
//HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32 writeVal[2], powerBase0[2], powerBase1[2];
u8 index = 0;
getPowerBase(Adapter, pPowerLevel, Channel, &powerBase0[0], &powerBase1[0]);
for(index=0; index<6; index++)
{
getTxPowerWriteValByRegulatory(Adapter, Channel, index,
&powerBase0[0], &powerBase1[0], &writeVal[0]);
writeOFDMPowerReg(Adapter, index, &writeVal[0]);
}
}
/*-----------------------------------------------------------------------------
* Function: PHY_RF6052SetOFDMTxPower
*
* Overview: For legacy and HY OFDM, we must read EEPROM TX power index for
* different channel and read original value in TX power register area from
* 0xe00. We increase offset and original value to be correct tx pwr.
*
* Input: NONE
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 11/05/2008 MHC Simulate 8192 series method.
* 01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to
* A/B pwr difference or legacy/HT pwr diff.
* 2. We concern with path B legacy/HT OFDM difference.
* 01/22/2009 MHC Support new EPRO format from SD3.
*
*---------------------------------------------------------------------------*/
VOID
rtl8192d_PHY_RF6052SetOFDMTxPower(
IN PADAPTER Adapter,
IN u8* pPowerLevel,
IN u8 Channel)
{
u32 writeVal[2], powerBase0[2], powerBase1[2];
u8 index = 0;
//DBG_871X("PHY_RF6052SetOFDMTxPower, channel(%d) \n", Channel);
getPowerBase(Adapter, pPowerLevel, Channel, &powerBase0[0], &powerBase1[0]);
for(index=0; index<6; index++)
{
getTxPowerWriteValByRegulatory(Adapter, pPowerLevel, Channel, index,
&powerBase0[0], &powerBase1[0], &writeVal[0]);
writeOFDMPowerReg(Adapter, index, &writeVal[0]);
}
}
