//! Raw data based data exchange with the media_server
status_t
SendToPort(port_id sendPort, int32 msgCode, command_data* msg, size_t size)
{
status_t status = write_port_etc(sendPort, msgCode, msg, size,
B_RELATIVE_TIMEOUT, TIMEOUT);
if (status != B_OK) {
ERROR("SendToPort: write_port failed, msgcode 0x%lx, port %ld: %s\n",
msgCode, sendPort, strerror(status));
if (status == B_BAD_PORT_ID && sendPort == sMediaServerPort) {
find_media_server_port();
sendPort = sMediaServerPort;
} else if (status == B_BAD_PORT_ID
&& sendPort == sMediaAddonServerPort) {
find_media_addon_server_port();
sendPort = sMediaAddonServerPort;
} else
return status;
status = write_port_etc(sendPort, msgCode, msg, size,
B_RELATIVE_TIMEOUT, TIMEOUT);
if (status != B_OK) {
ERROR("SendToPort: retrying write_port failed, msgCode 0x%lx, "
"port %ld: %s\n", msgCode, sendPort, strerror(status));
return status;
}
}
return B_OK;
}
// to be used only from a BView or BWindow
bool nsToolkit::CallMethodAsync(MethodInfo *info)
{
#ifdef DEBUG
printf("CMA\n");
#endif
ThreadInterfaceData id;
GetInterface();
id.data = info;
id.waitingThread = 0;
// Check message count to not exceed the port's capacity.
// There seems to be a BeOS bug that allows more
// messages on a port than its capacity.
port_info portinfo;
if (get_port_info(eventport, &portinfo) != B_OK)
{
return false;
}
if (port_count(eventport) < portinfo.capacity - 20)
{
if(write_port_etc(eventport, WM_CALLMETHOD, &id, sizeof(id), B_TIMEOUT, 0) == B_OK)
{
return true;
}
}
return false;
}
// Synchronous version, not in use at the moment
bool nsToolkit::CallMethod(MethodInfo *info)
{
#ifdef DEBUG
printf("TK-CM\n");
#endif
ThreadInterfaceData id;
GetInterface();
id.data = info;
id.waitingThread = find_thread(NULL);
// Check message count to not exceed the port's capacity.
// There seems to be a BeOS bug that allows more
// messages on a port than its capacity.
port_info portinfo;
if (get_port_info(eventport, &portinfo) != B_OK)
{
return false;
}
if (port_count(eventport) < portinfo.capacity - 20)
{
// If we cannot write inside 5 seconds, something is really wrong.
if(write_port_etc(eventport, WM_CALLMETHOD, &id, sizeof(id), B_TIMEOUT, 5000000) == B_OK)
{
// semantics for CallMethod are that it should be synchronous
suspend_thread(id.waitingThread);
return true;
}
}
return false;
}
status_t
PostEvent(bluetooth_device* ndev, void* event, size_t size)
{
struct hci_event_header* outgoingEvent = (struct hci_event_header*) event;
status_t err;
// Take actions on certain type of events.
switch (outgoingEvent->ecode) {
case HCI_EVENT_CONN_COMPLETE:
{
struct hci_ev_conn_complete* data
= (struct hci_ev_conn_complete*)(outgoingEvent + 1);
// TODO: XXX parse handle field
HciConnection* conn = AddConnection(data->handle, BT_ACL,
data->bdaddr, ndev->index);
if (conn == NULL)
panic("no mem for conn desc");
conn->ndevice = ndev;
TRACE("%s: Registered connection handle=%#x\n", __func__,
data->handle);
break;
}
case HCI_EVENT_DISCONNECTION_COMPLETE:
{
struct hci_ev_disconnection_complete_reply* data;
data = (struct hci_ev_disconnection_complete_reply*)
(outgoingEvent + 1);
RemoveConnection(data->handle, ndev->index);
TRACE("%s: unRegistered connection handle=%#x\n", __func__,
data->handle);
break;
}
}
// forward to bluetooth server
port_id port = find_port(BT_USERLAND_PORT_NAME);
if (port != B_NAME_NOT_FOUND) {
err = write_port_etc(port, PACK_PORTCODE(BT_EVENT, ndev->index, -1),
event, size, B_TIMEOUT, 1 * 1000 * 1000);
if (err != B_OK)
ERROR("%s: Error posting userland %s\n", __func__, strerror(err));
} else {
ERROR("%s: bluetooth_server not found for posting!\n", __func__);
err = B_NAME_NOT_FOUND;
}
return err;
}
void
BMediaEventLooper::SetEventLatency(bigtime_t latency)
{
CALLED();
// clamp to a valid value
if (latency < 0)
latency = 0;
fEventLatency = latency;
write_port_etc(ControlPort(), GENERAL_PURPOSE_WAKEUP, 0, 0, B_TIMEOUT, 0);
}
status_t
QueryPort(port_id requestPort, int32 msgCode, request_data* request,
size_t requestSize, reply_data* reply, size_t replySize)
{
status_t status = write_port_etc(requestPort, msgCode, request, requestSize,
B_RELATIVE_TIMEOUT, TIMEOUT);
if (status != B_OK) {
ERROR("QueryPort: write_port failed, msgcode 0x%lx, port %ld: %s\n",
msgCode, requestPort, strerror(status));
if (status == B_BAD_PORT_ID && requestPort == sMediaServerPort) {
find_media_server_port();
requestPort = sMediaServerPort;
} else if (status == B_BAD_PORT_ID
&& requestPort == sMediaAddonServerPort) {
find_media_addon_server_port();
requestPort = sMediaAddonServerPort;
} else
return status;
status = write_port_etc(requestPort, msgCode, request, requestSize,
B_RELATIVE_TIMEOUT, TIMEOUT);
if (status != B_OK) {
ERROR("QueryPort: retrying write_port failed, msgcode 0x%lx, port "
"%ld: %s\n", msgCode, requestPort, strerror(status));
return status;
}
}
int32 code;
status = read_port_etc(request->reply_port, &code, reply, replySize,
B_RELATIVE_TIMEOUT, TIMEOUT);
if (status < B_OK) {
ERROR("QueryPort: read_port failed, msgcode 0x%lx, port %ld: %s\n",
msgCode, request->reply_port, strerror(status));
}
return status < B_OK ? status : reply->result;
}
status_t
LinkSender::Flush(bigtime_t timeout, bool needsReply)
{
if (fCurrentStatus < B_OK)
return fCurrentStatus;
EndMessage(needsReply);
if (fCurrentStart == 0)
return B_OK;
STRACE(("info: LinkSender Flush() waiting to send messages of %ld bytes on port %ld.\n",
fCurrentEnd, fPort));
status_t err;
if (timeout != B_INFINITE_TIMEOUT) {
do {
err = write_port_etc(fPort, kLinkCode, fBuffer,
fCurrentEnd, B_RELATIVE_TIMEOUT, timeout);
} while (err == B_INTERRUPTED);
} else {
do {
err = write_port(fPort, kLinkCode, fBuffer, fCurrentEnd);
} while (err == B_INTERRUPTED);
}
if (err < B_OK) {
STRACE(("error info: LinkSender Flush() failed for %ld bytes (%s) on port %ld.\n",
fCurrentEnd, strerror(err), fPort));
return err;
}
STRACE(("info: LinkSender Flush() messages total of %ld bytes on port %ld.\n",
fCurrentEnd, fPort));
fCurrentEnd = 0;
fCurrentStart = 0;
return B_OK;
}
int
main()
{
sSemaphore1 = create_sem(0L, "test semaphore 1");
sSemaphore2 = create_sem(0L, "test semaphore 2");
sPort1 = create_port(2L, "test port 1");
sPort2 = create_port(1L, "test port 2");
printf("semaphore 1: %ld\n", sSemaphore1);
printf("semaphore 2: %ld\n", sSemaphore2);
printf("port 1: %ld\n", sPort1);
printf("port 2: %ld\n", sPort2);
thread_id thread = spawn_thread(notifier_thread, "notifier",
B_NORMAL_PRIORITY, NULL);
resume_thread(thread);
printf("thread: %ld\n", thread);
object_wait_info initialInfos[] = {
{
sSemaphore1,
B_OBJECT_TYPE_SEMAPHORE,
B_EVENT_ACQUIRE_SEMAPHORE
},
{
sSemaphore2,
B_OBJECT_TYPE_SEMAPHORE,
B_EVENT_ACQUIRE_SEMAPHORE
},
{
sPort1,
B_OBJECT_TYPE_PORT,
B_EVENT_READ
},
{
sPort2,
B_OBJECT_TYPE_PORT,
B_EVENT_WRITE
},
{
0,
B_OBJECT_TYPE_FD,
B_EVENT_READ
},
{
thread,
B_OBJECT_TYPE_THREAD,
B_EVENT_INVALID
}
};
int infoCount = sizeof(initialInfos) / sizeof(object_wait_info);
while (true) {
object_wait_info infos[infoCount];
memcpy(infos, initialInfos, sizeof(initialInfos));
ssize_t result = wait_for_objects_etc(infos, infoCount,
B_RELATIVE_TIMEOUT, 10000000LL);
if (result >= 0)
printf("\nwait_for_objects(): %ld\n", result);
else
printf("\nwait_for_objects(): %s\n", strerror(result));
print_events(infos, infoCount);
for (int i = 0; i < infoCount; i++) {
int32 type = infos[i].type;
int32 object = infos[i].object;
uint16 events = infos[i].events;
char buffer[256];
if (type == B_OBJECT_TYPE_SEMAPHORE) {
if (events & B_EVENT_ACQUIRE_SEMAPHORE) {
status_t error = acquire_sem_etc(object, 1,
B_RELATIVE_TIMEOUT, 0);
printf("acquire_sem(%ld): %s\n", object, strerror(error));
}
} else if (type == B_OBJECT_TYPE_PORT) {
if (events & B_EVENT_READ) {
int32 code;
ssize_t bytesRead = read_port_etc(object, &code,
buffer, sizeof(buffer), B_RELATIVE_TIMEOUT, 0);
printf("read_port(%ld): %ld\n", object, bytesRead);
}
if (events & B_EVENT_WRITE) {
status_t error = write_port_etc(object, 0xc0de, buffer, 10,
B_RELATIVE_TIMEOUT, 0);
printf("write_port(%ld): %s\n", object, strerror(error));
}
} else if (type == B_OBJECT_TYPE_FD) {
if (events & B_EVENT_READ) {
ssize_t bytesRead = read(object, buffer, sizeof(buffer));
printf("read(%ld): %ld\n", object, bytesRead);
}
} else if (type == B_OBJECT_TYPE_THREAD) {
if (events & B_EVENT_INVALID) {
printf("thread %ld quit\n", object);
infoCount--;
}
}
}
}
return 0;
}
/*----------------------------------------------------------------------------*/
status_t
write_port(port_id port, int32 code, const void *buffer, size_t bufferSize)
{
return write_port_etc(port, code, buffer, bufferSize, 0, 0);
}
