int zclss_processincmd_zonestatus_enrollrequest(struct zclincomingmsg * pInMsg){
IAS_ACE_ZoneTable_t zone;
ZStatus_t stat = -1;
uint16 zoneType;
uint16 manuCode;
uint8 responseCode;
uint8 zoneID;
zoneType = BUILD_UINT16( pInMsg->data[0], pInMsg->data[1] );
manuCode = BUILD_UINT16( pInMsg->data[2], pInMsg->data[3] );
if ( zclSS_ZoneTypeSupported( zoneType ) )
{
// Add zone to the table if space is available
if ( ( zclSS_CountAllZones() < ZCL_SS_MAX_ZONES-1 ) &&
( ( zoneID = zclSS_GetNextFreeZoneID() ) <= ZCL_SS_MAX_ZONE_ID ) )
{
zone.zoneID = zoneID;
zone.zoneType = zoneType;
// The application will fill in the right IEEE Address later
// zcl_cpyExtAddr( zone.zoneAddress, (void *)zclSS_UknownIeeeAddress );
memcpy(zone.zoneAddress, &zclSS_UknownIeeeAddress, sizeof(zclSS_UknownIeeeAddress));
if ( zclSS_AddZone( pInMsg->message->DstEndpoint, &zone ) == ZSuccess )
{
responseCode = ZSuccess;
}
else
{
// CIE does not permit new zones to enroll at this time
responseCode = SS_IAS_ZONE_STATUS_ENROLL_RESPONSE_CODE_NO_ENROLL_PERMIT;
}
}
else
{
// CIE reached its limit of number of enrolled zones
responseCode = SS_IAS_ZONE_STATUS_ENROLL_RESPONSE_CODE_TOO_MANY_ZONES;
}
}
else
{
// Zone type is not known to CIE and is not supported
responseCode = SS_IAS_ZONE_STATUS_ENROLL_RESPONSE_CODE_NOT_SUPPORTED;
}
// Callback the application so it can fill in the Device IEEE Address
// if ( pCBs->pfnEnrollRequest )
// {
// zclZoneEnrollReq_t req;
//
// req.srcAddr = &(pInMsg->msg->srcAddr);
// req.zoneID = zoneID;
// req.zoneType = zoneType;
// req.manufacturerCode = manuCode;
//
// stat = pCBs->pfnEnrollRequest( &req, pInMsg->msg->endPoint );
// }
// if ( stat == ZSuccess )
{
// Send a response back
stat = zclSS_IAS_Send_ZoneStatusEnrollResponseCmd( pInMsg->message->DstEndpoint, pInMsg->message->SrcEndpoint, pInMsg->message->SrcAddr, responseCode, zoneID, TRUE, pInMsg->zclframehdr.transseqnum );
return ( ZCL_STATUS_CMD_HAS_RSP );
}
// else
{
return ( stat );
}
}
/*******************************************************************************
* @fn zclSS_ProcessInCmd_ZoneStatus_EnrollRequest
*
* @brief Process in the received StatusEnrollRequest Command.
*
* @param pInMsg - pointer to the incoming message
*
* @return ZStatus_t
*/
static ZStatus_t zclSS_ProcessInCmd_ZoneStatus_EnrollRequest( zclIncoming_t *pInMsg,
zclSS_AppCallbacks_t *pCBs )
{
IAS_ACE_ZoneTable_t zone;
uint16 zoneType;
uint16 manuCode;
uint8 zoneID;
uint8 status;
if ( pInMsg->hdr.commandID != COMMAND_SS_IAS_ZONE_STATUS_ENROLL_REQUEST )
return ( ZFailure ); // Error ignore the command
zoneType = BUILD_UINT16( pInMsg->pData[0], pInMsg->pData[1] );
manuCode = BUILD_UINT16( pInMsg->pData[2], pInMsg->pData[3] );
if ( zclSS_ZoneTypeSupported( zoneType ) )
{
// What if the entry already exists?????
if ( zclSS_CountAllZones() < ZCL_SS_MAX_ZONES-1 )
{
// Add zone to the table
zoneID = zclSS_GetNextFreeZoneID();
zone.zoneID = zoneID;
zone.zoneType = zoneType;
// The application will fill in the right IEEE Address later
osal_cpyExtAddr( zone.zoneAddress, (void *)zclSS_UknownIeeeAddress );
if ( zclSS_AddZone( pInMsg->msg->endPoint, &zone ) == ZSuccess )
{
status = ZCL_STATUS_SUCCESS;
}
else
{
// CIE does not permit new zones to enroll at this time
status = SS_IAS_ZONE_STATUS_ENROLL_RESPONSE_CODE_NO_ENROLL_PERMIT;
}
}
else
{
// CIE reached its limit of number of enrolled zones
status = SS_IAS_ZONE_STATUS_ENROLL_RESPONSE_CODE_TOO_MANY_ZONES;
}
}
else
{
// Zone type is not known to CIE and is not supported
status = SS_IAS_ZONE_STATUS_ENROLL_RESPONSE_CODE_NOT_SUPPORTED;
}
// Send a response back
zclSS_IAS_Send_ZoneStatusEnrollResponseCmd( pInMsg->msg->endPoint, &(pInMsg->msg->srcAddr),
status, zoneID, true, pInMsg->hdr.transSeqNum );
if ( status == ZCL_STATUS_SUCCESS )
{
// Callback the application so it can fill in the Device IEEE Address
if ( pCBs->pfnEnrollRequest )
{
zclZoneEnrollReq_t req;
req.srcAddr = &(pInMsg->msg->srcAddr);
req.zoneID = zoneID;
req.zoneType = zoneType;
req.manufacturerCode = manuCode;
pCBs->pfnEnrollRequest( &req );
}
}
return ( ZCL_STATUS_CMD_HAS_RSP );
}