Beispiel #1
0
int main() {

    ble.init();
    ble.onDisconnection(disconnectionCallback);
    ble.onDataWritten(onDataWritten);

    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED);
    ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME, (const uint8_t *)deviceName, strlen(deviceName));
    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
    ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */

    ble.startAdvertising();

    GattCharacteristic toggleCharacteristic(0x2222,
                                            &relayState,
                                            sizeof(relayState),
                                            sizeof(relayState),
                                            GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE);

    GattCharacteristic *charTable[] = {&toggleCharacteristic};
    GattService toggleService(0x2220, charTable, sizeof(charTable) / sizeof(GattCharacteristic *));
    ble.addService(toggleService);

    while (true) {
        if (rxPayloadUpdated)
        {
            relayPIN = rxPayload[0];
            rxPayloadUpdated = false;
        }
            
        ble.waitForEvent();
    }
}
int main(void)
{
    led1 = 1;

    DEBUG("Initialising the nRF51822\n\r");
    ble.init(); // Initialise the BLE radio

    /* Register callbacks */
    ble.onDisconnection(disconnectionCallback);
    ble.onDataWritten(writeCharCallback);

    //uart = new UARTService(ble);

    /* Setup Advertising */
    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
    ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME,
                                     (const uint8_t *)"BLE NOTIF", sizeof("BLE NOTIF") - 1);
    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
    ble.setAdvertisingInterval(1600); // 1000ms; in multiples of 0.625ms.

    ble.addService(customService);

    ble.startAdvertising();

    while (true) {
        ble.waitForEvent();
    }
}
Beispiel #3
0
int main() {
  ble.init();
  ble.onConnection(onConnection);
  ble.onDisconnection(onDisconnection);
  ble.onDataWritten(onDataWritten);
 
  ble.accumulateAdvertisingPayload(
      GapAdvertisingData::BREDR_NOT_SUPPORTED);
  ble.setAdvertisingType(
      GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
  ble.accumulateAdvertisingPayload(
      GapAdvertisingData::SHORTENED_LOCAL_NAME,
      (const uint8_t *)NAME,
      sizeof(NAME) - 1);
  ble.accumulateAdvertisingPayload(
      GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS,
      (const uint8_t *)UARTServiceUUID_reversed,
      sizeof(UARTServiceUUID_reversed));
  ble.accumulateScanResponse(
      GapAdvertisingData::SHORTENED_LOCAL_NAME,
      (const uint8_t *)NAME,
      sizeof(NAME) - 1);
  ble.accumulateScanResponse(
      GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS,
      (const uint8_t *)UARTServiceUUID_reversed,
      sizeof(UARTServiceUUID_reversed));

  ble.setDeviceName((const uint8_t *)NAME);
 
  ble.setAdvertisingInterval(Gap::MSEC_TO_GAP_DURATION_UNITS(1000));
  ble.startAdvertising();
 
  UARTService uartService(ble);
  uartServicePtr = &uartService;

  while (true) {
    ble.waitForEvent();
  }
}
Beispiel #4
0
int main(void)
{
    blue  = LED_ON;
    green = LED_OFF;

#if BUTTON_DOWN
    button.mode(PullDown);
    button.rise(button_wakeup);
#else
    button.mode(PullUp);
    button.fall(button_wakeup);
#endif

    DEBUG("Initialising the nRF51822\n\r");
    ble.init();
    ble.onConnection(connectionCallback);
    ble.onDisconnection(disconnectionCallback);
    ble.onDataWritten(onDataWritten);

    /* setup advertising */
    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
    ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME,
                                    (const uint8_t *)BLE_NAME, sizeof(BLE_NAME));

    ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */
    ble.startAdvertising();

    /* Enable over-the-air firmware updates. Instantiating DFUSservice introduces a
     * control characteristic which can be used to trigger the application to
     * handover control to a resident bootloader. */
    DFUService dfu(ble);

    UARTService uartService(ble);
    uartServicePtr = &uartService;

    blue_led_time_to_off = 3000 / TICK_PERIOD_MS;

    Ticker ticker;
    ticker.attach_us(tick, TICK_PERIOD_MS * 1000);

    while (true) {
        if (button_event) {
            int click;

            blue = LED_ON;
            click = button_detect();
            blue = LED_OFF;
            DEBUG("click type: %d\n\r", click);

            button_event = false;

            if (1 == click) {
                single_click_input = current_input;
            } else if (2 == click) {
                double_click_input = current_input;
                green = LED_ON;
                green_led_time_to_off = 1000 / TICK_PERIOD_MS;
            } else if (-1 == click) {
                while (BUTTON_DOWN == button.read()) {

                }
                nrf_delay_us(3000);

                power_down();
            } else {
                continue;
            }

            DEBUG("typical input: %f, %f\n\r", single_click_input, double_click_input);

            threshold_update = 1;
        } else {
            ble.waitForEvent();
        }
    }
}