Beispiel #1
0
void CRoutingZone::DbgWriteBootstrapFile()
{
	DebugLogWarning(_T("Writing special bootstrap nodes.dat - not intended for normal use"));
	try
	{
		// Write a saved contact list.
		CUInt128 uID;
		CSafeBufferedFile file;
		CFileException fexp;
		if (file.Open(m_sFilename, CFile::modeWrite | CFile::modeCreate | CFile::typeBinary|CFile::shareDenyWrite, &fexp))
		{
			setvbuf(file.m_pStream, NULL, _IOFBF, 32768);

			// The bootstrap method gets a very nice sample of contacts to save.
			ContactMap mapContacts;
			CUInt128 uRandom(CUInt128((ULONG)0), 0);
			CUInt128 uDistance = uRandom;
			uDistance.Xor(uMe);
			GetClosestTo(2, uRandom, uDistance, 1200, &mapContacts, false, false);
			// filter out Kad1 nodes
			for (ContactMap::iterator itContactMap = mapContacts.begin(); itContactMap != mapContacts.end(); )
			{
				ContactMap::iterator itCurContactMap = itContactMap;
				++itContactMap;
				CContact* pContact = itCurContactMap->second;
				if (pContact->GetVersion() <= 1)
					mapContacts.erase(itCurContactMap);
			}
			// Start file with 0 to prevent older clients from reading it.
			file.WriteUInt32(0);
			// Now tag it with a version which happens to be 2 (1 till 0.48a).
			file.WriteUInt32(3);
			file.WriteUInt32(1); // if we would use version >=3, this would mean that this is not a normal nodes.dat
			file.WriteUInt32((uint32_t)mapContacts.size());
			for (ContactMap::const_iterator itContactMap = mapContacts.begin(); itContactMap != mapContacts.end(); ++itContactMap)
			{
				CContact* pContact = itContactMap->second;
				pContact->GetClientID(&uID);
				file.WriteUInt128(&uID);
				file.WriteUInt32(pContact->GetIPAddress());
				file.WriteUInt16(pContact->GetUDPPort());
				file.WriteUInt16(pContact->GetTCPPort());
				file.WriteUInt8(pContact->GetVersion());
			}
			file.Close();
			AddDebugLogLine( false, _T("Wrote %ld contact to bootstrap file."), mapContacts.size());
		}
		else
			DebugLogError(_T("Unable to store Kad file: %s"), m_sFilename);
	}
	catch (CFileException* e)
	{
		e->Delete();
		AddDebugLogLine(false, _T("CFileException in CRoutingZone::writeFile"));
	}

}
Beispiel #2
0
void CRoutingZone::WriteFile()
{
	// don't overwrite a bootstrap nodes.dat with an empty one, if we didn't finished probing
	if (!CKademlia::s_liBootstapList.IsEmpty() && GetNumContacts() == 0){
		DebugLogWarning(_T("Skipped storing nodes.dat, because we have an unfinished bootstrap of the nodes.dat version and no contacts in our routing table"));
		return;
	}
	try
	{
		// Write a saved contact list.
		CUInt128 uID;
		CSafeBufferedFile file;
		CFileException fexp;
		if (file.Open(m_sFilename, CFile::modeWrite | CFile::modeCreate | CFile::typeBinary|CFile::shareDenyWrite, &fexp))
		{
			setvbuf(file.m_pStream, NULL, _IOFBF, 32768);

			// The bootstrap method gets a very nice sample of contacts to save.
			ContactList listContacts;
			GetBootstrapContacts(&listContacts, 200);
			// Start file with 0 to prevent older clients from reading it.
			file.WriteUInt32(0);
			// Now tag it with a version which happens to be 2 (1 till 0.48a).
			file.WriteUInt32(2);
			// file.WriteUInt32(0) // if we would use version >=3, this would mean that this is a normal nodes.dat
			file.WriteUInt32((uint32_t)listContacts.size());
			for (ContactList::const_iterator itContactList = listContacts.begin(); itContactList != listContacts.end(); ++itContactList)
			{
				CContact* pContact = *itContactList;
				pContact->GetClientID(&uID);
				file.WriteUInt128(&uID);
				file.WriteUInt32(pContact->GetIPAddress());
				file.WriteUInt16(pContact->GetUDPPort());
				file.WriteUInt16(pContact->GetTCPPort());
				file.WriteUInt8(pContact->GetVersion());
				pContact->GetUDPKey().StoreToFile(file);
				file.WriteUInt8(pContact->IsIpVerified() ? 1 : 0);
			}
			file.Close();
			AddDebugLogLine( false, _T("Wrote %ld contact%s to file."), listContacts.size(), ((listContacts.size() == 1) ? _T("") : _T("s")));
		}
		else
			DebugLogError(_T("Unable to store Kad file: %s"), m_sFilename);
	}
	catch (CFileException* e)
	{
		e->Delete();
		AddDebugLogLine(false, _T("CFileException in CRoutingZone::writeFile"));
	}
}
Beispiel #3
0
bool CKademlia::FindNodeIDByIP(CKadClientSearcher& requester, uint32_t ip, uint16_t tcpPort, uint16_t udpPort)
{
	wxCHECK(IsRunning() && instance && GetUDPListener() && GetRoutingZone(), false);

	// first search our known contacts if we can deliver a result without asking, otherwise forward the request
	CContact* contact;
	if ((contact = GetRoutingZone()->GetContact(wxUINT32_SWAP_ALWAYS(ip), tcpPort, true)) != NULL) {
		uint8_t nodeID[16];
		contact->GetClientID().ToByteArray(nodeID);
		requester.KadSearchNodeIDByIPResult(KCSR_SUCCEEDED, nodeID);
		return true;
	} else {
		return GetUDPListener()->FindNodeIDByIP(&requester, wxUINT32_SWAP_ALWAYS(ip), tcpPort, udpPort);
	}
}
Beispiel #4
0
bool CKademlia::FindNodeIDByIP(CKadClientSearcher& rRequester, uint32_t dwIP, uint16_t nTCPPort, uint16_t nUDPPort) {
	if (!IsRunning() || m_pInstance == NULL || GetUDPListener() == NULL || GetRoutingZone() == NULL){
		ASSERT( false );
		return false;
	}
	// first search our known contacts if we can deliver a result without asking, otherwise forward the request
	CContact* pContact;
	if ((pContact = GetRoutingZone()->GetContact(ntohl(dwIP), nTCPPort, true)) != NULL){
		uchar uchID[16];
		pContact->GetClientID().ToByteArray(uchID);
		rRequester.KadSearchNodeIDByIPResult(KCSR_SUCCEEDED, uchID);
		return true;
	}
	else
		return GetUDPListener()->FindNodeIDByIP(&rRequester, ntohl(dwIP), nTCPPort, nUDPPort);
}
Beispiel #5
0
void CRoutingZone::WriteFile()
{
	try
	{
		// Write a saved contact list.
		CUInt128 uID;
		//CSafeBufferedFile file;
		CBufferedFileIO file;
		CFileException fexp;
		if (file.Open(m_sFilename, CFile::modeWrite | CFile::modeCreate | CFile::typeBinary|CFile::shareDenyWrite, &fexp))
		{
			setvbuf(file.m_pStream, NULL, _IOFBF, 32768);

			// The bootstrap method gets a very nice sample of contacts to save.
			ContactList listContacts;
			GetBootstrapContacts(&listContacts, 200);
			// Start file with 0 to prevent older clients from reading it.
			file.WriteUInt32(0);
			// Now tag it with a version which happens to be 1.
			file.WriteUInt32(1);
			file.WriteUInt32((uint32)listContacts.size());
			for (ContactList::const_iterator itContactList = listContacts.begin(); itContactList != listContacts.end(); ++itContactList)
			{
				CContact* pContact = *itContactList;
				pContact->GetClientID(&uID);
				file.WriteUInt128(&uID);
				file.WriteUInt32(pContact->GetIPAddress());
				file.WriteUInt16(pContact->GetUDPPort());
				file.WriteUInt16(pContact->GetTCPPort());
				file.WriteUInt8(pContact->GetVersion());
			}
			file.Close();
			//AddDebugLogLine( false, _T("Wrote %ld contact%s to file."), listContacts.size(), ((listContacts.size() == 1) ? _T("") : _T("s")));
			TRACE(_T("Wrote %ld contact%s to file.\n"), listContacts.size(), ((listContacts.size() == 1) ? _T("") : _T("s")));
		}
	}
	catch (CFileException* e)
	{
		e->Delete();
		AddDebugLogLine(false, _T("CFileException in CRoutingZone::writeFile"));
	}
}
Beispiel #6
0
void CUDPFirewallTester::QueryNextClient(){ // try the next available client for the firewallcheck
	
	if (!IsFWCheckUDPRunning() || !GetUDPCheckClientsNeeded() || CKademlia::GetPrefs()->GetExternalKadPort() == 0)
		return; // check if more tests are needed and wait till we know our extern port

	if (!CKademlia::IsRunning() || CKademlia::GetRoutingZone() == NULL){
		ASSERT( false );
		return;
	}

	while (!m_liPossibleTestClients.IsEmpty()){
		CContact curContact = m_liPossibleTestClients.RemoveHead();
		// udp firewallchecks are not supported by clients with kadversion < 6
		if (curContact.GetVersion() <= KADEMLIA_VERSION5_48a)
			continue;

		// sanitize - do not test ourself
		if (ntohl(curContact.GetIPAddress()) == theApp.GetPublicIP() || curContact.GetClientID().CompareTo(CKademlia::GetPrefs()->GetKadID()) == 0)
			continue;

		// check if we actually requested a firewallcheck from this client at some point
		bool bAlreadyRequested = false;
		for (POSITION pos = m_liUsedTestClients.GetHeadPosition(); pos != NULL;){
			if (m_liUsedTestClients.GetNext(pos).contact.GetIPAddress() == curContact.GetIPAddress()){
				bAlreadyRequested = true;
				break;
			}
		}
		// check if we know itsIP already from kademlia - we need an IP which was never used for UDP yet
		if (!bAlreadyRequested && CKademlia::GetRoutingZone()->GetContact(curContact.GetIPAddress(), 0, false) == NULL){
			// ok, tell the clientlist to do the same search and start the check if ok
			if (theApp.clientlist->DoRequestFirewallCheckUDP(curContact)){
				UsedClient_Struct sAdd = { curContact, false };
				m_liUsedTestClients.AddHead(sAdd);
				m_byFWChecksRunningUDP++;
				break;
			}
		}
	}
}
Beispiel #7
0
void CKademlia::Process()
{

	if (instance == NULL || !m_running) {
		return;
	}

	time_t now = time(NULL);
	uint32_t maxUsers = 0;
	uint32_t tempUsers = 0;
	uint32_t lastContact = 0;
	bool updateUserFile = false;

	wxASSERT(instance->m_prefs != NULL);
	lastContact = instance->m_prefs->GetLastContact();
	CSearchManager::UpdateStats();

	if (m_statusUpdate <= now) {
		updateUserFile = true;
		m_statusUpdate = MIN2S(1) + now;
	}

	if (m_nextFirewallCheck <= now) {
		RecheckFirewalled();
	}

	if (m_nextSelfLookup <= now) {
		CSearchManager::FindNode(instance->m_prefs->GetKadID(), true);
		m_nextSelfLookup = HR2S(4) + now;
	}

	if (m_nextFindBuddy <= now) {
		instance->m_prefs->SetFindBuddy();
		m_nextFindBuddy = MIN2S(20) + now;
	}

	if (m_externPortLookup <= now && CUDPFirewallTester::IsFWCheckUDPRunning() && GetPrefs()->FindExternKadPort(false)) {
		// If our UDP firewallcheck is running and we don't know our external port, we send a request every 15 seconds
		CContact *contact = GetRoutingZone()->GetRandomContact(3, 6);
		if (contact != NULL) {
			AddDebugLogLineN(logKadPrefs, wxT("Requesting our external port from ") + KadIPToString(contact->GetIPAddress()));
			DebugSend(Kad2Ping, contact->GetIPAddress(), contact->GetUDPPort());
			GetUDPListener()->SendNullPacket(KADEMLIA2_PING, contact->GetIPAddress(), contact->GetUDPPort(), contact->GetUDPKey(), &contact->GetClientID());
		} else {
			AddDebugLogLineN(logKadPrefs, wxT("No valid client for requesting external port available"));
		}
		m_externPortLookup = 15 + now;
	}

	for (EventMap::const_iterator it = m_events.begin(); it != m_events.end(); ++it) {
		CRoutingZone *zone = it->first;
		if (updateUserFile) {
			// The EstimateCount function is not made for really small networks, if we are in LAN mode, it is actually
			// better to assume that all users of the network are in our routing table and use the real count function
			if (IsRunningInLANMode()) {
				tempUsers = zone->GetNumContacts();
			} else {
				tempUsers = zone->EstimateCount();
			}
			if (maxUsers < tempUsers) {
				maxUsers = tempUsers;
			}
		}

		if (m_bigTimer <= now) {
			if (zone->m_nextBigTimer <= now) {
				if(zone->OnBigTimer()) {
					zone->m_nextBigTimer = HR2S(1) + now;
					m_bigTimer = SEC(10) + now;
				}
			} else {
				if (lastContact && (now - lastContact > KADEMLIADISCONNECTDELAY - MIN2S(5))) {
					if(zone->OnBigTimer()) {
						zone->m_nextBigTimer = HR2S(1) + now;
						m_bigTimer = SEC(10) + now;
					}
				}
			}
		}

		if (zone->m_nextSmallTimer <= now) {
			zone->OnSmallTimer();
			zone->m_nextSmallTimer = MIN2S(1) + now;
		}
	}

	// This is a convenient place to add this, although not related to routing
	if (m_nextSearchJumpStart <= now) {
		CSearchManager::JumpStart();
		m_nextSearchJumpStart = SEARCH_JUMPSTART + now;
	}

	// Try to consolidate any zones that are close to empty.
	if (m_consolidate <= now) {
		uint32_t mergedCount = instance->m_routingZone->Consolidate();
		if (mergedCount) {
			AddDebugLogLineN(logKadRouting, CFormat(wxT("Kad merged %u zones")) % mergedCount);
		}
		m_consolidate = MIN2S(45) + now;
	}

	// Update user count only if changed.
	if (updateUserFile) {
		if (maxUsers != instance->m_prefs->GetKademliaUsers()) {
			instance->m_prefs->SetKademliaUsers(maxUsers);
			instance->m_prefs->SetKademliaFiles();
			theApp->ShowUserCount();
		}
	}

	if (!IsConnected() && !s_bootstrapList.empty() && (now - m_bootstrap > 15 || (GetRoutingZone()->GetNumContacts() == 0 && now - m_bootstrap >= 2))) {
		CContact *contact = s_bootstrapList.front();
		s_bootstrapList.pop_front();
		m_bootstrap = now;
		AddDebugLogLineN(logKadMain, CFormat(wxT("Trying to bootstrap Kad from %s, Distance: %s Version: %u, %u contacts left"))
			% KadIPToString(contact->GetIPAddress()) % contact->GetDistance().ToHexString() % contact->GetVersion() % s_bootstrapList.size());
		instance->m_udpListener->Bootstrap(contact->GetIPAddress(), contact->GetUDPPort(), contact->GetVersion(), &contact->GetClientID());
		delete contact;
	}

	if (GetUDPListener() != NULL) {
		GetUDPListener()->ExpireClientSearch();	// function does only one compare in most cases, so no real need for a timer
	}
}
Beispiel #8
0
void CRoutingZone::OnSmallTimer()
{
	if (!IsLeaf())
		return;

	CContact *pContact = NULL;
	time_t tNow = time(NULL);
	ContactList listEntries;
	// Remove dead entries
	m_pBin->GetEntries(&listEntries);
	for (ContactList::iterator itContactList = listEntries.begin(); itContactList != listEntries.end(); ++itContactList)
	{
		pContact = *itContactList;
		if ( pContact->GetType() == 4)
		{
			if (((pContact->m_tExpires > 0) && (pContact->m_tExpires <= tNow)))
			{
				if(!pContact->InUse())
				{
					//-----------------------------------------------------------------
					CString strID;
					CUInt128 uId = pContact->GetClientID();
					uId.ToHexString(&strID);

					CString strIP;
					pContact->GetIPAddress(&strIP);

					TRACE(_T("DelContact id=%s ip=%s %u %u %u\n"), 
						strID, strIP, pContact->GetTCPPort(), pContact->GetUDPPort(),
						CKademlia::GetRoutingZone()->GetNumContacts());
					//-----------------------------------------------------------------

					m_pBin->RemoveContact(pContact);
					delete pContact;
				}
				continue;
			}
		}
		if(pContact->m_tExpires == 0)
			pContact->m_tExpires = tNow;
	}
	pContact = m_pBin->GetOldest();
	if( pContact != NULL )
	{
		if ( pContact->m_tExpires >= tNow || pContact->GetType() == 4)
		{
			m_pBin->RemoveContact(pContact);
			m_pBin->m_listEntries.push_back(pContact);
			pContact = NULL;
		}
	}
	if(pContact != NULL)
	{
		pContact->CheckingType();
		if (pContact->GetVersion() >= 2/*47a*/)
		{
//--->xt	if (thePrefs.GetDebugClientKadUDPLevel() > 0)
				//DebugSend("KADEMLIA2_HELLO_REQ", pContact->GetIPAddress(), pContact->GetUDPPort());
			CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA2_HELLO_REQ, pContact->GetIPAddress(), pContact->GetUDPPort(), true);
		}
		else
		{
//--->xt	if (thePrefs.GetDebugClientKadUDPLevel() > 0)
				//DebugSend("KADEMLIA_HELLO_REQ", pContact->GetIPAddress(), pContact->GetUDPPort());
			CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA_HELLO_REQ, pContact->GetIPAddress(), pContact->GetUDPPort(), false);
			if (pContact->CheckIfKad2())
			{
//--->xt		if (thePrefs.GetDebugClientKadUDPLevel() > 0)
					//DebugSend("KADEMLIA2_HELLO_REQ", pContact->GetIPAddress(), pContact->GetUDPPort());
				CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA2_HELLO_REQ, pContact->GetIPAddress(), pContact->GetUDPPort(), true);
			}
		}
	}
}
Beispiel #9
0
void CKademlia::Process()
{
	if( m_pInstance == NULL || !m_bRunning)
		return;
	bool bUpdateUserFile = false;
	uint32_t uMaxUsers = 0;
	uint32_t uTempUsers = 0;
	time_t uLastContact = 0;
	time_t tNow = time(NULL);
	ASSERT(m_pInstance->m_pPrefs != NULL);
	uLastContact = m_pInstance->m_pPrefs->GetLastContact();
	CSearchManager::UpdateStats();
	if( m_tStatusUpdate <= tNow )
	{
		bUpdateUserFile = true;
		m_tStatusUpdate = MIN2S(1) + tNow;
	}
	if( m_tNextFirewallCheck <= tNow)
		RecheckFirewalled();
	if (m_tNextUPnPCheck != 0 && m_tNextUPnPCheck <= tNow)
	{
		theApp.emuledlg->RefreshUPnP();
		m_tNextUPnPCheck = 0; // will be reset on firewallcheck
	}

	if (m_tNextSelfLookup <= tNow)
	{
		CSearchManager::FindNode(m_pInstance->m_pPrefs->GetKadID(), true);
		m_tNextSelfLookup = HR2S(4) + tNow;
	}
	if (m_tNextFindBuddy <= tNow)
	{
		m_pInstance->m_pPrefs->SetFindBuddy();
		m_tNextFindBuddy = MIN2S(20) + tNow;
	}
	if (m_tExternPortLookup <= tNow && CUDPFirewallTester::IsFWCheckUDPRunning() && GetPrefs()->FindExternKadPort(false)){
		// if our UDP firewallcheck is running and we don't know our external port, we send a request every 15 seconds
		CContact* pContact = GetRoutingZone()->GetRandomContact(3, KADEMLIA_VERSION6_49aBETA);
		if (pContact != NULL){
			DEBUG_ONLY( DebugLog(_T("Requesting our external port from %s"), ipstr(ntohl(pContact->GetIPAddress()))) );
			GetUDPListener()->SendNullPacket(KADEMLIA2_PING, pContact->GetIPAddress(), pContact->GetUDPPort(), pContact->GetUDPKey(), &pContact->GetClientID());
		}
		else
			DEBUG_ONLY( DebugLogWarning(_T("No valid client for requesting external port available")) );
		m_tExternPortLookup = 15 + tNow;
	}
	for (EventMap::const_iterator itEventMap = m_mapEvents.begin(); itEventMap != m_mapEvents.end(); ++itEventMap)
	{
		CRoutingZone* pZone = itEventMap->first;
		if( bUpdateUserFile )
		{
			uTempUsers = pZone->EstimateCount();
			if( uMaxUsers < uTempUsers )
				uMaxUsers = uTempUsers;
		}
		if (m_tBigTimer <= tNow)
		{
			if( pZone->m_tNextBigTimer <= tNow )
			{
				if(pZone->OnBigTimer())
				{
					pZone->m_tNextBigTimer = HR2S(1) + tNow;
					m_tBigTimer = SEC(10) + tNow;
				}
			}
			else
			{
				if( uLastContact && ( (tNow - uLastContact) > (KADEMLIADISCONNECTDELAY-MIN2S(5))))
				{
					if(pZone->OnBigTimer())
					{
						pZone->m_tNextBigTimer = HR2S(1) + tNow;
						m_tBigTimer = SEC(10) + tNow;
					}
				}
			}
		}
		if (pZone->m_tNextSmallTimer <= tNow)
		{
			pZone->OnSmallTimer();
			pZone->m_tNextSmallTimer = MIN2S(1) + tNow;
		}
	}

	// This is a convenient place to add this, although not related to routing
	if (m_tNextSearchJumpStart <= tNow)
	{
		CSearchManager::JumpStart();
		m_tNextSearchJumpStart = SEARCH_JUMPSTART + tNow;
	}

	// Try to consolidate any zones that are close to empty.
	if (m_tConsolidate <= tNow)
	{
		uint32_t uMergedCount = m_pInstance->m_pRoutingZone->Consolidate();
		if(uMergedCount)
			AddDebugLogLine(false, _T("Kad merged %u Zones"), uMergedCount);
		m_tConsolidate = MIN2S(45) + tNow;
	}

	//Update user count only if changed.
	if( bUpdateUserFile )
	{
		if( uMaxUsers != m_pInstance->m_pPrefs->GetKademliaUsers())
		{
			m_pInstance->m_pPrefs->SetKademliaUsers(uMaxUsers);
			m_pInstance->m_pPrefs->SetKademliaFiles();
			theApp.emuledlg->ShowUserCount();
		}
	}

	if(!IsConnected() && !s_liBootstapList.IsEmpty() 
		&& (tNow - m_tBootstrap > 15 || (GetRoutingZone()->GetNumContacts() == 0 && tNow - m_tBootstrap >= 2)))
	{
		CContact* pContact = s_liBootstapList.RemoveHead();
		m_tBootstrap = tNow;
		DebugLog(_T("Trying to Bootstrap Kad from %s, Distance: %s, Version: %u, %u Contacts left"), ipstr(ntohl(pContact->GetIPAddress())), pContact->GetDistance().ToHexString(),  pContact->GetVersion(), s_liBootstapList.GetCount());
		m_pInstance->m_pUDPListener->Bootstrap(pContact->GetIPAddress(), pContact->GetUDPPort(), pContact->GetVersion() > 1, pContact->GetVersion(), &pContact->GetClientID());
		delete pContact;
	}

	if (GetUDPListener() != NULL)
		GetUDPListener()->ExpireClientSearch(); // function does only one compare in most cases, so no real need for a timer
}
Beispiel #10
0
void CRoutingZone::OnSmallTimer()
{
    if (!IsLeaf()) {
        return;
    }

    CContact *c = NULL;
    time_t now = time(NULL);
    ContactList entries;

    // Remove dead entries
    m_bin->GetEntries(&entries);
    for (ContactList::iterator it = entries.begin(); it != entries.end(); ++it) {
        c = *it;
        if (c->GetType() == 4) {
            if ((c->GetExpireTime() > 0) && (c->GetExpireTime() <= now)) {
                if (!c->InUse()) {
                    m_bin->RemoveContact(c);
                    delete c;
                }
                continue;
            }
        }
        if(c->GetExpireTime() == 0) {
            c->SetExpireTime(now);
        }
    }

    c = m_bin->GetOldest();
    if (c != NULL) {
        if (c->GetExpireTime() >= now || c->GetType() == 4) {
            m_bin->PushToBottom(c);
            c = NULL;
        }
    }

    if (c != NULL) {
        c->CheckingType();
        if (c->GetVersion() >= 6) {
            DebugSend(L"Kad2HelloReq", c->GetIPAddress(), c->GetUDPPort());
            CUInt128 clientID = c->GetClientID();
            CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA2_HELLO_REQ, c->GetIPAddress(), c->GetUDPPort(), c->GetVersion(), c->GetUDPKey(), &clientID, false);
            if (c->GetVersion() >= 8) {
                // FIXME:
                // This is a bit of a work around for statistic values. Normally we only count values from incoming HELLO_REQs for
                // the firewalled statistics in order to get numbers from nodes which have us on their routing table,
                // however if we send a HELLO due to the timer, the remote node won't send a HELLO_REQ itself anymore (but
                // a HELLO_RES which we don't count), so count those statistics here. This isn't really accurate, but it should
                // do fair enough. Maybe improve it later for example by putting a flag into the contact and make the answer count
                CKademlia::GetPrefs()->StatsIncUDPFirewalledNodes(false);
                CKademlia::GetPrefs()->StatsIncTCPFirewalledNodes(false);
            }
        } else if (c->GetVersion() >= 2) {
            DebugSend(L"Kad2HelloReq", c->GetIPAddress(), c->GetUDPPort());
            CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA2_HELLO_REQ, c->GetIPAddress(), c->GetUDPPort(), c->GetVersion(), 0, NULL, false);
            ASSERT(c->GetUDPKey() == CKadUDPKey(0));
        } else {
            ASSERT(0);
        }
    }
}
Beispiel #11
0
void CRoutingZone::OnSmallTimer()
{
	if (!IsLeaf())
		return;

	CContact *pContact = NULL;
	time_t tNow = time(NULL);
	ContactList listEntries;
	// Remove dead entries
	m_pBin->GetEntries(&listEntries);
	for (ContactList::iterator itContactList = listEntries.begin(); itContactList != listEntries.end(); ++itContactList)
	{
		pContact = *itContactList;
		if ( pContact->GetType() == 4)
		{
			if (((pContact->m_tExpires > 0) && (pContact->m_tExpires <= tNow)))
			{
				if(!pContact->InUse())
				{
					m_pBin->RemoveContact(pContact);
					delete pContact;
				}
				continue;
			}
		}
		if(pContact->m_tExpires == 0)
			pContact->m_tExpires = tNow;
	}
	pContact = m_pBin->GetOldest();
	if( pContact != NULL )
	{
		if ( pContact->m_tExpires >= tNow || pContact->GetType() == 4)
		{
			m_pBin->PushToBottom(pContact);
			pContact = NULL;
		}
	}
	if(pContact != NULL)
	{
		pContact->CheckingType();
		if (pContact->GetVersion() >= 6){ /*48b*/
			if (thePrefs.GetDebugClientKadUDPLevel() > 0)
				DebugSend("KADEMLIA2_HELLO_REQ", pContact->GetIPAddress(), pContact->GetUDPPort());
			CUInt128 uClientID = pContact->GetClientID();
			CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA2_HELLO_REQ, pContact->GetIPAddress(), pContact->GetUDPPort(), pContact->GetVersion(), pContact->GetUDPKey(), &uClientID, false);
			if (pContact->GetVersion() >= KADEMLIA_VERSION8_49b){
				// FIXME:
				// This is a bit of a work arround for statistic values. Normally we only count values from incoming HELLO_REQs for
				// the firewalled statistics in order to get numbers from nodes which have us on their routing table,
				// however if we send a HELLO due to the timer, the remote node won't send a HELLO_REQ itself anymore (but
				// a HELLO_RES which we don't count), so count those statistics here. This isn't really accurate, but it should
				// do fair enough. Maybe improve it later for example by putting a flag into the contact and make the answer count
				CKademlia::GetPrefs()->StatsIncUDPFirewalledNodes(false);
				CKademlia::GetPrefs()->StatsIncTCPFirewalledNodes(false);
			}
		}
		else if (pContact->GetVersion() >= 2/*47a*/){
			if (thePrefs.GetDebugClientKadUDPLevel() > 0)
				DebugSend("KADEMLIA2_HELLO_REQ", pContact->GetIPAddress(), pContact->GetUDPPort());
			CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA2_HELLO_REQ, pContact->GetIPAddress(), pContact->GetUDPPort(), pContact->GetVersion(), 0, NULL, false);
			ASSERT( CKadUDPKey(0) == pContact->GetUDPKey() );
		}
		else
		{
			if (thePrefs.GetDebugClientKadUDPLevel() > 0)
				DebugSend("KADEMLIA_HELLO_REQ", pContact->GetIPAddress(), pContact->GetUDPPort());
			CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA_HELLO_REQ, pContact->GetIPAddress(), pContact->GetUDPPort(), 0, 0, NULL, false);
			if (pContact->CheckIfKad2())
			{
				if (thePrefs.GetDebugClientKadUDPLevel() > 0)
					DebugSend("KADEMLIA2_HELLO_REQ", pContact->GetIPAddress(), pContact->GetUDPPort());
				CKademlia::GetUDPListener()->SendMyDetails(KADEMLIA2_HELLO_REQ, pContact->GetIPAddress(), pContact->GetUDPPort(), 1, 0, NULL, false);
			}
		}
	}
}
Beispiel #12
0
void CKademlia::Process()
{
	if( m_pInstance == NULL || !m_bRunning)
		return;
	bool bUpdateUserFile = false;
	uint32 uMaxUsers = 0;
	uint32 uTempUsers = 0;
	uint32 uLastContact = 0;
	time_t tNow = time(NULL);
	ASSERT(m_pInstance->m_pPrefs != NULL);
	uLastContact = m_pInstance->m_pPrefs->GetLastContact();
	CSearchManager::UpdateStats();
	if( m_tStatusUpdate <= tNow )
	{
		bUpdateUserFile = true;
		m_tStatusUpdate = MIN2S(1) + tNow;
#ifdef _BOOTSTRAPNODESDAT
		// do some random lookup to fill out contact list with fresh (but for routing useless) nodes which we can
	// use for our bootstrap nodes.dat
	if (GetRoutingZone()->GetNumContacts() < 1500)
	{
		CUInt128 uRandom;
		uRandom.SetValueRandom();
		CSearchManager::FindNode(uRandom, false);	
	}
#endif
	}
	if( m_tNextFirewallCheck <= tNow)
		RecheckFirewalled();
	if (m_tNextUPnPCheck != 0 && m_tNextUPnPCheck <= tNow)
	{
		theApp.emuledlg->RefreshUPnP();
		m_tNextUPnPCheck = 0; // will be reset on firewallcheck
	}

	if (m_tNextSelfLookup <= tNow)
	{
		CSearchManager::FindNode(m_pInstance->m_pPrefs->GetKadID(), true);
		m_tNextSelfLookup = HR2S(4) + tNow;
	}
	if (m_tNextFindBuddy <= tNow)
	{
		m_pInstance->m_pPrefs->SetFindBuddy();
		m_tNextFindBuddy = MIN2S(20) + tNow;
	}
	if (m_tExternPortLookup <= tNow && CUDPFirewallTester::IsFWCheckUDPRunning() && GetPrefs()->FindExternKadPort(false)){
		// if our UDP firewallcheck is running and we don't know our external port, we send a request every 15 seconds
		CContact* pContact = GetRoutingZone()->GetRandomContact(3, KADEMLIA_VERSION6_49aBETA);
		if (pContact != NULL){
			DEBUG_ONLY( DebugLog(_T("Requesting our external port from %s"), ipstr(ntohl(pContact->GetIPAddress()))) );
			GetUDPListener()->SendNullPacket(KADEMLIA2_PING, pContact->GetIPAddress(), pContact->GetUDPPort(), pContact->GetUDPKey(), &pContact->GetClientID());
		}
		else
			DEBUG_ONLY( DebugLogWarning(_T("No valid client for requesting external port available")) );
		m_tExternPortLookup = 15 + tNow;
	}
	for (EventMap::const_iterator itEventMap = m_mapEvents.begin(); itEventMap != m_mapEvents.end(); ++itEventMap)
	{
		CRoutingZone* pZone = itEventMap->first;
		if( bUpdateUserFile )
		{
			// The EstimateCount function is not made for really small networks, if we are in LAN mode, it is actually
			// better to assume that all users of the network are in our routingtable and use the real count function
			if (IsRunningInLANMode())
				uTempUsers = pZone->GetNumContacts();
			else
				uTempUsers = pZone->EstimateCount();
			if( uMaxUsers < uTempUsers )
				uMaxUsers = uTempUsers;
		}
		if (m_tBigTimer <= tNow)
		{
			if( pZone->m_tNextBigTimer <= tNow )
			{
				if(pZone->OnBigTimer())
				{
					pZone->m_tNextBigTimer = HR2S(1) + tNow;
					m_tBigTimer = SEC(10) + tNow;
				}
			}
			else
			{
				if( uLastContact && ( (tNow - uLastContact) > (KADEMLIADISCONNECTDELAY-MIN2S(5))))
				{
					if(pZone->OnBigTimer())
					{
						pZone->m_tNextBigTimer = HR2S(1) + tNow;
						m_tBigTimer = SEC(10) + tNow;
					}
				}
			}
		}
		if (pZone->m_tNextSmallTimer <= tNow)
		{
			pZone->OnSmallTimer();
			pZone->m_tNextSmallTimer = MIN2S(1) + tNow;
		}
	}

	// This is a convenient place to add this, although not related to routing
	if (m_tNextSearchJumpStart <= tNow)
	{
		CSearchManager::JumpStart();
		m_tNextSearchJumpStart = SEARCH_JUMPSTART + tNow;
	}

	// Try to consolidate any zones that are close to empty.
	if (m_tConsolidate <= tNow)
	{
		uint32 uMergedCount = m_pInstance->m_pRoutingZone->Consolidate();
		if(uMergedCount)
			AddDebugLogLine(false, _T("Kad merged %u Zones"), uMergedCount);
		m_tConsolidate = MIN2S(45) + tNow;
	}

	//Update user count only if changed.
	if( bUpdateUserFile )
	{
		if( uMaxUsers != m_pInstance->m_pPrefs->GetKademliaUsers())
		{
			m_pInstance->m_pPrefs->SetKademliaUsers(uMaxUsers);
			m_pInstance->m_pPrefs->SetKademliaFiles();
			theApp.emuledlg->ShowUserCount();
		}
	}

	if(!IsConnected() && !s_liBootstapList.IsEmpty() 
		&& (tNow - m_tBootstrap > 15 || (GetRoutingZone()->GetNumContacts() == 0 && tNow - m_tBootstrap >= 2)))
	{
		if (!s_liTriedBootstapList.IsEmpty())
		{
			CContact* pLastTriedContact = s_liTriedBootstapList.GetHead();
			pLastTriedContact->SetBootstrapFailed();
			theApp.emuledlg->kademliawnd->ContactRef(pLastTriedContact);
		}
		CContact* pContact = s_liBootstapList.RemoveHead();
		m_tBootstrap = tNow;
		DebugLog(_T("Trying to Bootstrap Kad from %s, Distance: %s, Version: %u, %u Contacts left"), ipstr(ntohl(pContact->GetIPAddress())), pContact->GetDistance().ToHexString(),  pContact->GetVersion(), s_liBootstapList.GetCount());
		m_pInstance->m_pUDPListener->Bootstrap(pContact->GetIPAddress(), pContact->GetUDPPort(), pContact->GetVersion(), &pContact->GetClientID());
		s_liTriedBootstapList.AddHead(pContact);
	}
	else if (!IsConnected() && s_liBootstapList.IsEmpty() && !s_liTriedBootstapList.IsEmpty()  
		&& (tNow - m_tBootstrap > 15 || (GetRoutingZone()->GetNumContacts() == 0 && tNow - m_tBootstrap >= 2)))
	{
		// failed to bootstrap
		AddLogLine(true, GetResString(IDS_BOOTSTRAPFAILED));
		theApp.emuledlg->kademliawnd->StopUpdateContacts();
		while (!s_liTriedBootstapList.IsEmpty())
			delete s_liTriedBootstapList.RemoveHead();
		theApp.emuledlg->kademliawnd->StartUpdateContacts();
	}

	if (GetUDPListener() != NULL)
		GetUDPListener()->ExpireClientSearch(); // function does only one compare in most cases, so no real need for a timer
}