CRhinoCommand::result CCommandPlugIn2Add::RunCommand( const CRhinoCommandContext& context )
{
  CRhinoGetObject go;
  go.SetCommandPrompt( L"Select object" );
  go.GetObjects( 1, 1 );
  if( go.CommandResult() != success )
    return go.CommandResult();

  const CRhinoObject* object = go.Object(0).Object();
  if( 0 == object )
    return failure;

  CRhinoGetPoint gp;
  gp.SetCommandPrompt( L"Pick point" );
  gp.GetPoint();
  if( gp.CommandResult() != success )
    return gp.CommandResult();

  CRhinoGetString gs;
  gp.SetCommandPrompt( L"Description" );
  gs.GetString();
  if( gs.CommandResult() != success )
    return gs.CommandResult();

  bool rc = AddPlugInUserData( context.m_doc, object, gp.Point(), gs.String() );
  RhinoApp().Print( L"%s\n", rc ? L"Succeeded!" : L"Failed!" );

  return success;
}
CRhinoCommand::result CCommandSampleOpenIges::RunCommand( const CRhinoCommandContext& context )
{
  ON_wString filename;

  if( context.IsInteractive() )
  {
    DWORD dwFlags = OFN_ENABLESIZING | OFN_EXPLORER | OFN_FILEMUSTEXIST | OFN_HIDEREADONLY | OFN_PATHMUSTEXIST;
    const wchar_t* szFilter = L"IGES Files (*.igs;*.iges)|*.igs; *.iges||";
    CWnd* pParentWnd = CWnd::FromHandle( RhinoApp().MainWnd() );

#if defined(WIN64)
    CFileDialog dialog( TRUE, L"igs", 0, dwFlags, szFilter, pParentWnd, 0, TRUE );
#else
    CFileDialog dialog( TRUE, L"igs", 0, dwFlags, szFilter, pParentWnd );
#endif
    INT_PTR rc = dialog.DoModal();
    if( rc != IDOK )
      return CRhinoCommand::cancel;

    filename = dialog.GetPathName();
  }
  else
  {
    CRhinoGetString gs;
    gs.SetCommandPrompt( L"IGES file to open" );
    gs.GetString();
    if( gs.CommandResult() != CRhinoCommand::success )
      return gs.CommandResult();

    filename = gs.String();
  }

  filename.TrimLeftAndRight();
  if( filename.IsEmpty() )
    return CRhinoCommand::nothing;

  if( !CRhinoFileUtilities::FileExists(filename) )
  {
    RhinoApp().Print( L"File \"%s\" not found.\n", filename );
    return CRhinoCommand::failure;
  }

  // Note, setting the document modified flag to false will prevent the
  // "Do you want to save this file..." mesasge from displaying when you
  // open a file (if the current document has been modified in any way).
  // But, you will (also) loose any modifications to the current document.
  // So, use the following line of code carefully.
  context.m_doc.SetModifiedFlag( FALSE );

  ON_wString script;
  script.Format( L"_-Open \"%s\" _Enter _Enter _Enter", filename );

  RhinoApp().RunScript( script, 0 );

  return CRhinoCommand::success;
}
Beispiel #3
0
CRhinoCommand::result CCommandNewName::RunCommand( const CRhinoCommandContext& context )
{
	// Select an object to modify
  CRhinoGetObject go;
  go.SetCommandPrompt( L"Select object to change name" );
  go.EnablePreSelect( TRUE );
  go.EnableSubObjectSelect( FALSE );
  go.GetObjects( 1, 1 );
  if( go.CommandResult() != CRhinoCommand::success )
    return go.CommandResult();
 
  // Get the object reference
  const CRhinoObjRef& objref = go.Object(0);
 
  // Get the object
  const CRhinoObject* obj = objref.Object();
  if( !obj )
    return CRhinoCommand::failure;
 
  // Make copy of object attributes. This objects
  // holds an object's user-defined name.
  ON_3dmObjectAttributes obj_attribs = obj->Attributes();
 
  // Prompt for new object name
  CRhinoGetString gs;
  gs.SetCommandPrompt( L"New object name" );
  gs.SetDefaultString( obj_attribs.m_name );
  gs.AcceptNothing( TRUE );
  gs.GetString();
  if( gs.CommandResult() != CRhinoCommand::success )
    return gs.CommandResult();
 
  // Get the string entered by the user
  ON_wString obj_name = gs.String();
  obj_name.TrimLeftAndRight();
 
  // Is name the same?
  if( obj_name.Compare(obj_attribs.m_name) == 0 )
    return CRhinoCommand::nothing;
 
  // Modify the attributes of the object
  obj_attribs.m_name = obj_name;
  context.m_doc.ModifyObjectAttributes( objref, obj_attribs );
 
  return CRhinoCommand::success;

}
Beispiel #4
0
CRhinoCommand::result CGenPianoVis::RunCommand( const CRhinoCommandContext& context )
{

  Cscript1PlugIn& plugin = script1PlugIn();

  if( !plugin.IsDlgVisible() )
  {
    return CRhinoCommand::nothing;
  }


  /*GET THE LAYER NAME*/
  CRhinoGetString gs;
  gs.SetCommandPrompt( L"NAME OF LAYER WHICH CONTAINS VISIONAL PLANE : " );
  gs.GetString();
  if( gs.CommandResult() != CRhinoCommand::success )
  {
	  return gs.CommandResult();
  }
  /*VALIDATE THE STRING*/
  ON_wString layer_name = gs.String();
  layer_name.TrimLeftAndRight();
  if( layer_name.IsEmpty() )
  {
	  return CRhinoCommand::cancel;
  }
    
  /*GET A REFERENCE TO THE LAYER TABLE*/
  CRhinoLayerTable& layer_table = context.m_doc.m_layer_table;
 
  /*FIND THE LAYER*/ 
  int layer_index = layer_table.FindLayer(layer_name );
  if( layer_index < 0 )
  {
    RhinoApp().Print( L"LAYER \"%s\" DOES NOT EXIST.\n", layer_name );
	
  }
  else
  {
	  ON_Layer currentLayer;
	  int numLayers = layer_table.LayerCount();
	  layer_table.SetCurrentLayerIndex(layer_index);
	  for(int i = 0; i < numLayers; i++)
	  {
		  if(i != layer_index)
		  {
			  currentLayer = layer_table[i];
			  currentLayer.SetVisible(false);
			  layer_table.ModifyLayer(currentLayer, i);
		  }
	  }
	  context.m_doc.Redraw();
	  const CRhinoLayer& layer = context.m_doc.m_layer_table[layer_index];
	  ON_SimpleArray<CRhinoObject*> obj_list;

	 
	  
      int object_count = context.m_doc.LookupObject( layer, obj_list );
      if( object_count > 0 )
      {
		 /********************************************************************/
		 //CRhinoObject* obj = obj_list[0];
		 //if( obj && obj->IsSelectable() )
		 //{
			// obj->Select(true);
			// obj->Highlight(true);
			// m_doc.Redraw();
		 //}
		 /********************************************************************/
		 //aniello gegin
		 // Disable redrawing
		 //CRhinoView::EnableDrawing( FALSE ); meglio tenerlo disabilitato altrimenti la schermata non si aggiorna.
 
         // Get the next runtime object serial number before scripting
		 unsigned int first_sn = CRhinoObject::NextRuntimeObjectSerialNumber();
	     //aniello end
	     /////////////////////
		  
		 CRhinoGetObject gc;
		 gc.SetCommandPrompt( L"SELECT LINE TO EXTEND" );
         gc.SetGeometryFilter( CRhinoGetObject::curve_object );
         gc.GetObjects( 1, 1 );
		 if(gc.CommandResult() == CRhinoCommand::success )
		 {
			const CRhinoObjRef& objref = gc.Object(0);
            const ON_Curve* pC = ON_Curve::Cast( objref.Geometry() );
			ON_Curve* crv0 = pC->DuplicateCurve();
			
			bool rc0 = RhinoExtendCurve(crv0, CRhinoExtend::Line, 1, 5);
			bool rc1 = RhinoExtendCurve(crv0, CRhinoExtend::Line, 0, 15);
			context.m_doc.ReplaceObject(objref, *crv0 );
            context.m_doc.Redraw();

			///// begin prova memorizzazione id o name linea pv
		////ON_UUID uuid1 = gc->Attributes().m_uuid;
		////	ON_UUID uuid1 = objref.ObjectUuid();
		//	//ON_UuidToString( uuid1, cvrPrima );
		//	 const CRhinoObject* obj5 = objref.Object();
  //          ON_UUID uuid1 = obj5->Attributes().m_uuid;

		//	pvcurva =  uuid1;
		//	ON_3dmObjectAttributes obj_attribs = obj5->Attributes();
		//	CRhinoGetString gs;
  //gs.SetCommandPrompt( L"New object name" );
  //gs.SetDefaultString( obj_attribs.m_name );
  //gs.AcceptNothing( TRUE );
  //gs.GetString();
  //if( gs.CommandResult() != CRhinoCommand::success )
  //  return gs.CommandResult();
 
  //// Get the string entered by the user
  //ON_wString obj_name = gs.String();
  //obj_name.TrimLeftAndRight();
 
  //// Is name the same?
  //if( obj_name.Compare(obj_attribs.m_name) == 0 )
  //  return CRhinoCommand::nothing;

		//	//ON_wString obj_name = (L"stringanome");
		//	obj_attribs.m_name = obj_name;
		//	context.m_doc.ModifyObjectAttributes( objref, obj_attribs );

///// end prova memorizzazione id o name linea pv



			
			ON_3dPoint p0 = crv0->PointAtStart();
            ON_3dPoint p1 = crv0->PointAtEnd();
 
			CRhinoGetNumber gn;
			//double default_value = 30;
			gn.SetCommandPrompt( L"ENTER ANTERIOR ANGLE FOR EXTENSION in grad: " );
			gn.SetCommandPromptDefault(L"30");
			gn.SetDefaultNumber(30);
			//gn.AcceptNothing(true);
			gn.GetNumber();
			double alphaAngle = gn.Number();
			
			

			gn.SetCommandPrompt( L"ENTER ANTERIOR LENGTH FOR EXTENSION in mm: " );
			gn.SetCommandPromptDefault(L"80");
			gn.SetDefaultNumber(80);
			gn.GetNumber();
			double antLen = gn.Number();

			gn.SetCommandPrompt( L"ENTER ANTERIOR FILLET RADIUS in mm: " );
			gn.SetCommandPromptDefault(L"6");
			gn.SetDefaultNumber(6);
			gn.GetNumber();
			double antRad = gn.Number();

			gn.SetCommandPrompt( L"ENTER POSTERIOR ANGLE FOR EXTENSION default <ALPHA + 10°= 40°> : " );
			gn.SetCommandPromptDefault(L"40");
			gn.SetDefaultNumber(40);
			gn.GetNumber();
			double betaAngle = gn.Number();

			gn.SetCommandPrompt( L"ENTER POSTERIOR LENGTH FOR EXTENSION in mm: " );
			gn.SetCommandPromptDefault(L"80");
			gn.SetDefaultNumber(80);
			gn.GetNumber();
			double posLen = gn.Number();

			gn.SetCommandPrompt( L"ENTER POSTERIOR FILLET RADIUS in mm: " );
			gn.SetCommandPromptDefault(L"13");
			gn.SetDefaultNumber(13);
			gn.GetNumber();
			double posRad = gn.Number();

		
			ON_3dPoint pointStart;
            ON_3dPoint pointEnd;
		 
			//// Fillet radius
			//double radius = 1.0;
		 
			// Do the fillet calculation
			double t0 = 0.0, t1 = 0.0;
 
			ON_Plane plane;
			plane.plane_equation.y = 1.0;

			pointStart = crv0->PointAtStart();
			
			pointEnd   = crv0->PointAtEnd();

			ON_3dPoint point0((pointStart.x - posLen*cos(betaAngle*acos(-1.0)/180.0)), 0.0, (pointStart.z + posLen*sin(betaAngle*acos(-1.0)/180.0)));
			ON_3dPoint point1((pointEnd.x + antLen*cos(alphaAngle*acos(-1.0)/180.0)), 0.0, (pointEnd.z - antLen*sin(alphaAngle*acos(-1.0)/180.0)));

			/**********************************/
			/*CREATE THE LINE CURVES TO FILLET*/ 
			/**********************************/
			ON_LineCurve curve0( pointStart, point0 ); //LINEA A SINISTRA IN FRONT VIEW
			ON_LineCurve curve1( point1, pointEnd );   //LINEA A DESTRA IN FRONT VIEW 

			
			/***************************************************/
			/*FILLET AT THE END/START POINTS OF THE LINE CURVES*/ 
			/***************************************************/
			double curve0_t = crv0->Domain().Max();
			double curve1_t = curve1.Domain().Min();
			ON_3dPoint PuntoAltezzaTacco = curve1.m_line.to;
			AltezzaTacco = PuntoAltezzaTacco;
			
			
			
			if( RhinoGetFilletPoints(curve1,  *crv0, antRad, curve1_t, curve0_t, t1, t0, plane) )
			{
				/*******************************/
				/*TRIM BACK THE TWO LINE CURVES*/ 
				/*******************************/
				ON_Interval domain1( curve1.Domain().Min(), t1 );
				curve1.Trim( domain1 );
		 
				ON_Interval domain0( crv0->Domain().Min(), t0 );
				crv0->Trim( domain0 );

		        /**************************/
				/*COMPUTE THE FILLET CURVE*/ 
				/**************************/
				ON_3dVector radial0 = curve1.PointAt(t1) - plane.Origin();
				radial0.Unitize();
		 
				ON_3dVector radial1 = crv0->PointAt(t0) - plane.Origin();
				radial1.Unitize();
		 
				double angle = acos( radial0 * radial1 );
				ON_Plane fillet_plane( plane.Origin(), radial0, radial1 );
				ON_Arc fillet( fillet_plane, plane.Origin(), antRad, angle );
		 
				/******************/
				/*ADD THE GEOMETRY*/
				/******************/
				context.m_doc.AddCurveObject( curve1 );
				context.m_doc.ReplaceObject(objref, *crv0 );
				context.m_doc.AddCurveObject( fillet );
				context.m_doc.Redraw();
			}
			

			t0 = 0.0, t1 = 0.0;
			/*FILLET AT THE START POINTS OF THE LINE CURVES*/
			curve0_t = crv0->Domain().Min();
			curve1_t = curve0.Domain().Min();

			if( RhinoGetFilletPoints(curve0, *crv0, posRad, curve1_t, curve0_t, t1, t0, plane) )
			{
				// Trim back the two line curves
				ON_Interval domain0( t1, curve0.Domain().Max() );
				curve0.Trim( domain0 );
		 
				ON_Interval domain1( t0, crv0->Domain().Max() );
				crv0->Trim( domain1 );
				

				/*COMPUTE THE FILLET CURVE*/ 
				ON_3dVector radial0 = curve0.PointAt(t1) - plane.Origin();
				radial0.Unitize();
		 
				ON_3dVector radial1 = crv0->PointAt(t0) - plane.Origin();
				radial1.Unitize();
		 
				double angle = acos( radial0 * radial1 );
				ON_Plane fillet_plane( plane.Origin(), radial0, radial1 );
				ON_Arc fillet( fillet_plane, plane.Origin(), posRad, angle );
		 
				/*ADD THE GEOMETRY*/ 
				context.m_doc.AddCurveObject( curve0 );
				context.m_doc.ReplaceObject(objref, *crv0 );
				context.m_doc.AddCurveObject( fillet );
				context.m_doc.Redraw();
			}
			/******************/
			/*CLEAN UP OR LEAK*/ 
			/******************/
			delete crv0;
			crv0 = 0;

			
			// code temp
// aniello begin
// Get the next runtime object serial number after scripting
  unsigned int next_sn = CRhinoObject::NextRuntimeObjectSerialNumber();

 
  // Enable redrawing
  //CRhinoView::EnableDrawing( TRUE );
 
  // if the two are the same, then nothing happened
 /* if( first_sn == next_sn )
    //return CRhinoCommand::nothing;
	return;
*/ //commento questo per far compilare :-)
 
  // The the pointers of all of the objects that were added during scripting
  ON_SimpleArray<const CRhinoObject*> objects;
  for( unsigned int sn = first_sn; sn < next_sn; sn++ )
  {
    const CRhinoObject* obj = context.m_doc.LookupObjectByRuntimeSerialNumber( sn );
    if( obj && !obj->IsDeleted() )
      objects.Append( obj );
  }
 
  /*
  // Sort and cull the list, as there may be duplicates
  if( objects.Count() > 1 )
  {
    objects.HeapSort( CompareObjectPtr );
    const CRhinoObject* last_obj = objects[objects.Count()-1];
    for( int i = objects.Count()-2; i >= 0; i-- )
    {
      const CRhinoObject* prev_obj = objects[i];
     if( last_obj == prev_obj )
        objects.Remove(i);
      else
        last_obj = prev_obj;
    }
  }
	*/
  // Do something with the list...
  for( int i = 0; i < objects.Count(); i++ )
  {
    const CRhinoObject* obj = objects[i];
    if( obj->IsSelectable(true) )
      obj->Select( true );
  }
//aniello end
			//end code temp

  			/*********************/
			/*JOIN LINES TOGETHER*/
			/*********************/
			ON_SimpleArray<const ON_Curve*> lines;
			ON_SimpleArray<CRhinoObject*> objectsLine;
			ON_SimpleArray<ON_Curve*> output;
			double tolerance = context.m_doc.AbsoluteTolerance();
			int LinesCount = context.m_doc.LookupObject( layer, objectsLine);

			if( LinesCount > 0 )
			{
				for(int i = 0; i < LinesCount; i++)
				{
					const CRhinoCurveObject* curve_obj = CRhinoCurveObject::Cast( objectsLine[i] );
					if( curve_obj )
					{
						lines.Append(curve_obj->Curve());
					}
				}
			}
		    if( RhinoMergeCurves(lines, output, tolerance) )
		    {
				for(int i = 0; i < output.Count(); i++ )
				{
					CRhinoCurveObject* crv = new CRhinoCurveObject;
					crv->SetCurve( output[i] );
					if( context.m_doc.AddObject(crv) )
					{
						crv->Select();
					}
					else
					{
						delete crv;
					}
				}
		    }
			/************************/
			/*DELETE CHILDREN CURVES*/
			/************************/
			for(int i = 0; i < LinesCount; i++ )
			{
				context.m_doc.DeleteObject(objectsLine[i]);
			}
			context.m_doc.Redraw();

			/*************************/
			/*END JOIN LINES TOGETHER*/
			/*************************/
	     }
	  }/*CHIUSURA IF( OBJECT_COUNT > 0 )*/
  }/*CHIUSURA ELSE*/

  return CRhinoCommand::success;
}