// this test validates that IPV6 addresses work fine with CStunMessageBuilder and CStunMessageReader
HRESULT CTestBuilder::Test2()
{
HRESULT hr = S_OK;
CSocketAddress addr(0,0);
CSocketAddress addrValidate(0,0);
const char* ip6addr = "ABCDEFGHIJKLMNOP";
sockaddr_in6 addr6 = {};
CStunMessageReader reader;
StunTransactionId transid;
CStunMessageBuilder builder;
CRefCountedBuffer spBuffer;
addr6.sin6_family = AF_INET6;
addr6.sin6_port = htons(9999);
memcpy(addr6.sin6_addr.s6_addr, ip6addr, 16);
addr = CSocketAddress(addr6);
ChkA(builder.AddHeader(StunMsgTypeBinding, StunMsgClassRequest));
ChkA(builder.AddRandomTransactionId(&transid));
ChkA(builder.AddMappedAddress(addr));
ChkA(builder.AddXorMappedAddress(addr));
ChkA(builder.GetResult(&spBuffer));
ChkIfA(CStunMessageReader::BodyValidated != reader.AddBytes(spBuffer->GetData(), spBuffer->GetSize()), E_FAIL);
ChkA(reader.GetXorMappedAddress(&addrValidate));
ChkIf(addrValidate.IsSameIP_and_Port(addr) == false, E_FAIL);
Cleanup:
return hr;
}
HRESULT CTestMessageHandler::InitBindingRequest(CStunMessageBuilder& builder)
{
StunTransactionId transid;
builder.AddHeader(StunMsgTypeBinding, StunMsgClassRequest);
builder.AddRandomTransactionId(&transid);
builder.FixLengthField();
return S_OK;
}
void CStunThreadMessageHandler::SendErrorResponse()
{
HRESULT hr = S_OK;
CStunMessageBuilder builder;
CRefCountedBuffer spBuffer;
_spResponseBuffer->SetSize(0);
builder.GetStream().Attach(_spResponseBuffer, true);
builder.AddHeader((StunMessageType)_error.msgtype, _error.msgclass);
builder.AddTransactionId(_transid);
builder.AddErrorCode(_error.errorcode, "FAILED");
if ((_error.errorcode == ::STUN_ERROR_UNKNOWNATTRIB) && (_error.attribUnknown != 0))
{
builder.AddUnknownAttributes(&_error.attribUnknown, 1);
}
else if ((_error.errorcode == ::STUN_ERROR_STALENONCE) || (_error.errorcode == ::STUN_ERROR_UNAUTHORIZED))
{
if (_error.szNonce[0])
{
builder.AddStringAttribute(STUN_ATTRIBUTE_NONCE, _error.szNonce);
}
if (_error.szRealm[0])
{
builder.AddStringAttribute(STUN_ATTRIBUTE_REALM, _error.szRealm);
}
}
ChkIfA(_spStunResponder == NULL, E_FAIL);
builder.GetResult(&spBuffer);
ASSERT(spBuffer->GetSize() != 0);
ASSERT(spBuffer == _spResponseBuffer);
_spStunResponder->SendResponse(_socketOutput, _addrResponse, spBuffer);
Cleanup:
return;
}
HRESULT CStunThreadMessageHandler::ProcessBindingRequest(CStunMessageReader& reader)
{
HRESULT hrTmp;
bool fRequestHasPaddingAttribute = false;
SocketRole socketOutput = _message.localSocket;
StunChangeRequestAttribute changerequest = {};
bool fSendOtherAddress = false;
bool fSendOriginAddress = false;
SocketRole socketOther;
CSocketAddress addrOrigin;
CSocketAddress addrOther;
CStunMessageBuilder builder;
uint16_t paddingSize = 0;
bool fLegacyFormat = false; // set to true if the client appears to be rfc3489 based instead of based on rfc 5789
_spResponseBuffer->SetSize(0);
builder.GetStream().Attach(_spResponseBuffer, true);
fLegacyFormat = reader.IsMessageLegacyFormat();
// check for an alternate response port
// check for padding attribute (todo - figure out how to inject padding into the response)
// check for a change request and validate we can do it. If so, set _socketOutput. If not, fill out _error and return.
// determine if we have an "other" address to notify the caller about
// did the request come with a padding request
if (SUCCEEDED(reader.GetPaddingAttributeSize(&paddingSize)))
{
// todo - figure out how we're going to get the MTU size of the outgoing interface
fRequestHasPaddingAttribute = true;
}
// as per 5780, section 6.1, If the Request contained a PADDING attribute...
// "If the Request also contains the RESPONSE-PORT attribute the server MUST return an error response of type 400."
if (_fRequestHasResponsePort && fRequestHasPaddingAttribute)
{
_error.errorcode = STUN_ERROR_BADREQUEST;
return E_FAIL;
}
// handle change request logic and figure out what "other-address" attribute is going to be
if (SUCCEEDED(reader.GetChangeRequest(&changerequest)))
{
if (changerequest.fChangeIP)
{
socketOutput = SocketRoleSwapIP(socketOutput);
}
if(changerequest.fChangePort)
{
socketOutput = SocketRoleSwapPort(socketOutput);
}
// IsValidSocketRole just validates the enum, not whether or not we can send on it
ASSERT(IsValidSocketRole(socketOutput));
// now, make sure we have the ability to send from another socket
if (_spStunResponder->HasAddress(socketOutput) == false)
{
// send back an error. We're being asked to respond using another address that we don't have a socket for
_error.errorcode = STUN_ERROR_BADREQUEST;
return E_FAIL;
}
}
// If we're only working one socket, then that's ok, we just don't send back an "other address" unless we have all four sockets confgiured
// now here's a problem. If we binded to "INADDR_ANY", all of the sockets will have "0.0.0.0" for an address (same for IPV6)
// So we effectively can't send back "other address" if don't really know our own IP address
// Fortunately, recvfromex and the ioctls on the socket allow address discovery a bit better
fSendOtherAddress = (_spStunResponder->HasAddress(RolePP) && _spStunResponder->HasAddress(RolePA) && _spStunResponder->HasAddress(RoleAP) && _spStunResponder->HasAddress(RoleAA));
if (fSendOtherAddress)
{
socketOther = SocketRoleSwapIP(SocketRoleSwapPort(_message.localSocket));
hrTmp = _spStunResponder->GetSocketAddressForRole(socketOther, &addrOther);
ASSERT(SUCCEEDED(hrTmp));
// so if our ip address is "0.0.0.0", disable this attribute
fSendOtherAddress = (SUCCEEDED(hrTmp) && (addrOther.IsIPAddressZero()==false));
}
// What's our address origin?
VERIFY(SUCCEEDED(_spStunResponder->GetSocketAddressForRole(socketOutput, &addrOrigin)));
if (addrOrigin.IsIPAddressZero())
{
// Since we're sending back from the IP address we received on, we can just use the address the message came in on
// Otherwise, we don't actually know it
if (socketOutput == _message.localSocket)
{
addrOrigin = _message.localAddr;
}
}
fSendOriginAddress = (false == addrOrigin.IsIPAddressZero());
// Success - we're all clear to build the response
_socketOutput = socketOutput;
_spResponseBuffer->SetSize(0);
builder.GetStream().Attach(_spResponseBuffer, true);
builder.AddHeader(StunMsgTypeBinding, StunMsgClassSuccessResponse);
builder.AddTransactionId(_transid);
builder.AddMappedAddress(_message.remoteAddr);
if (fLegacyFormat == false)
{
builder.AddXorMappedAddress(_message.remoteAddr);
}
if (fSendOriginAddress)
{
builder.AddResponseOriginAddress(addrOrigin);
}
if (fSendOtherAddress)
{
builder.AddOtherAddress(addrOther, fLegacyFormat); // pass true to send back CHANGED-ADDRESS, otherwise, pass false to send back OTHER-ADDRESS
}
// finally - if we're supposed to have a message integrity attribute as a result of authorization, add it at the very end
if (_integrity.fSendWithIntegrity)
{
if (_integrity.fUseLongTerm == false)
{
builder.AddMessageIntegrityShortTerm(_integrity.szPassword);
}
else
{
builder.AddMessageIntegrityLongTerm(_integrity.szUser, _integrity.szRealm, _integrity.szPassword);
}
}
builder.FixLengthField();
return S_OK;
}