Beispiel #1
0
static int execute_set_tx_frequency_arm(char *szPort, UINT8 carrier_on, UINT16 tx_frequency, int tx_power)
{
    ComHelper SerialPort;

    if (!SerialPort.OpenPort(szPort))
    {
        printf("Open %s port Failed\n", szPort);
        return 0;
    }
    int chan_num = tx_frequency - 2400;
    UINT8 hci_set_tx_frequency_arm[] = {0x01, 0x014, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
    UINT8 hci_set_tx_frequency_arm_cmd_complete_event[] = {0x04, 0x0e, 0x04, 0x01, 0x014, 0xfc, 0x00};
    hci_set_tx_frequency_arm[4] = (carrier_on == 0) ? 1 : 0;
    hci_set_tx_frequency_arm[5] = (carrier_on == 1) ? chan_num : 2;
    hci_set_tx_frequency_arm[6] = 0;                // unmodulated
    hci_set_tx_frequency_arm[7] = 0;                // modulation type  
    hci_set_tx_frequency_arm[8] = (carrier_on == 1) ? 8 : 0;
    hci_set_tx_frequency_arm[9] = tx_power;

    printf ("Sending HCI Command:\n");
    HexDump(hci_set_tx_frequency_arm, sizeof(hci_set_tx_frequency_arm));

    // write HCI reset
    SerialPort.Write(hci_set_tx_frequency_arm, sizeof(hci_set_tx_frequency_arm));

    // read HCI response header
    DWORD dwRead = SerialPort.Read((LPBYTE)&in_buffer[0], 3);

    // read HCI response payload
    if (dwRead == 3 && in_buffer[2] > 0)
        dwRead += SerialPort.Read((LPBYTE)&in_buffer[3], in_buffer[2]);

    printf ("Received HCI Event:\n");
    HexDump(in_buffer, dwRead);
    if (dwRead == sizeof(hci_set_tx_frequency_arm_cmd_complete_event))
    {
        if (memcmp(in_buffer, hci_set_tx_frequency_arm_cmd_complete_event, dwRead) == 0)
        {
            printf ("Success\n");
            return 1;
        }
    }
    return FALSE;
}
Beispiel #2
0
static int execute_le_transmitter_test(char *szPort, UINT8 chan_number, UINT8 length, UINT8 pattern)
{
    ComHelper SerialPort;

    if (!SerialPort.OpenPort(szPort))
	{
        printf("Open %s port Failed\n", szPort);
		return 0;
	}

    UINT8 hci_le_transmitter_test[] = {0x01, 0x01E, 0x20, 0x03, 0x00, 0x00, 0x00};
    UINT8 hci_le_transmitter_test_cmd_complete_event[] = {0x04, 0x0e, 0x04, 0x01, 0x01E, 0x20, 0x00};
    hci_le_transmitter_test[4] = chan_number;
    hci_le_transmitter_test[5] = length;
    hci_le_transmitter_test[6] = pattern;
    printf ("Sending HCI Command:\n");
    HexDump(hci_le_transmitter_test, sizeof(hci_le_transmitter_test));

    // write HCI reset
    SerialPort.Write(hci_le_transmitter_test, sizeof(hci_le_transmitter_test));

    // read HCI response header
    DWORD dwRead = SerialPort.Read((LPBYTE)&in_buffer[0], 3);

    // read HCI response payload
    if (dwRead == 3 && in_buffer[2] > 0)
        dwRead += SerialPort.Read((LPBYTE)&in_buffer[3], in_buffer[2]);

    printf ("Received HCI Event:\n");
    HexDump(in_buffer, dwRead);
    if (dwRead == sizeof(hci_le_transmitter_test_cmd_complete_event))
    {
        if (memcmp(in_buffer, hci_le_transmitter_test_cmd_complete_event, dwRead) == 0)
        {
            printf("Success\n");
			printf("LE Transmitter Test running, to stop execute le_test_end\n");
			return 1;
        }
    }
    return FALSE;
}
Beispiel #3
0
static int execute_le_test_end(char *szPort)
{
    ComHelper SerialPort;

    if (!SerialPort.OpenPort(szPort))
	{
        printf("Open %s port Failed\n", szPort);
		return 0;
	}

    UINT8 hci_le_test_end[] = {0x01, 0x1f, 0x20, 0x00};
    UINT8 hci_le_test_end_cmd_complete_event[] = {0x04, 0x0e, 0x06, 0x01, 0x1f, 0x20, 0x00};

    printf ("Sending HCI Command:\n");
    HexDump(hci_le_test_end, sizeof(hci_le_test_end));

    // write HCI reset
    SerialPort.Write(hci_le_test_end, sizeof(hci_le_test_end));

    // read HCI response header
    DWORD dwRead = SerialPort.Read((LPBYTE)&in_buffer[0], 3);

    // read HCI response payload
    if (dwRead == 3 && in_buffer[2] > 0)
        dwRead += SerialPort.Read((LPBYTE)&in_buffer[3], in_buffer[2]);

    printf ("Received HCI Event:\n");
    HexDump(in_buffer, dwRead);
    if ((dwRead > sizeof(hci_le_test_end_cmd_complete_event))
     && (memcmp(in_buffer, hci_le_test_end_cmd_complete_event, sizeof(hci_le_test_end_cmd_complete_event)) == 0))
    {
        printf("Success num_packets_received %d\n", in_buffer[7] + (in_buffer[8] << 8));
        return TRUE;
    }
    else
    {
        return FALSE;
    }
}
Beispiel #4
0
static int execute_reset(char *szPort)
{
    ComHelper SerialPort;

    if (!SerialPort.OpenPort(szPort))
	{
        printf("Open %s port Failed\n", szPort);
		return 0;
	}

    UINT8 hci_reset[] = {0x01, 0x03, 0x0c, 0x00};
    UINT8 hci_reset_cmd_complete_event[] = {0x04, 0x0e, 0x04, 0x01, 0x03, 0x0c, 0x00};

    printf ("Sending HCI Command:\n");
    HexDump(hci_reset, sizeof(hci_reset));

    // write HCI reset
    SerialPort.Write(hci_reset, sizeof(hci_reset));

    // read HCI response header
    DWORD dwRead = SerialPort.Read((LPBYTE)&in_buffer[0], 3);

    // read HCI response payload
    if (dwRead == 3 && in_buffer[2] > 0)
        dwRead += SerialPort.Read((LPBYTE)&in_buffer[3], in_buffer[2]);

    printf ("Received HCI Event:\n");
    HexDump(in_buffer, dwRead);
    if (dwRead == sizeof(hci_reset_cmd_complete_event))
    {
        if (memcmp(in_buffer, hci_reset_cmd_complete_event, dwRead) == 0)
        {
            printf ("Success\n");
            return 1;
        }
    }
    return 0;
}