Beispiel #1
0
void TreeDiagram::computeExtremes(uint *maxLabelLen,uint *maxXPos)
{
  uint ml=0,mx=0;
  QListIterator<DiagramRow> it(*this);
  DiagramRow *dr;
  bool done=FALSE;
  for (;(dr=it.current()) && !done;++it)
  {
    QListIterator<DiagramItem> rit(*dr);
    DiagramItem *di;
    for (;(di=rit.current());++rit)
    {
      if (di->isInList()) done=TRUE;
      if (maxXPos) mx=QMAX(mx,(uint)di->xPos());
      if (maxLabelLen) ml=QMAX(ml,Image::stringLength(di->label()));
    }
  }
  if (maxLabelLen) *maxLabelLen=ml;
  if (maxXPos)     *maxXPos=mx;
}
Beispiel #2
0
void ClassDiagram::writeFigure(FTextStream &output,const char *path,
                               const char *fileName) const
{
  uint baseRows=base->computeRows();
  uint superRows=super->computeRows();
  uint baseMaxX, baseMaxLabelWidth, superMaxX, superMaxLabelWidth;
  base->computeExtremes(&baseMaxLabelWidth,&baseMaxX);
  super->computeExtremes(&superMaxLabelWidth,&superMaxX);

  uint rows=baseRows+superRows-1;
  uint cols=(QMAX(baseMaxX,superMaxX)+gridWidth*2-1)/gridWidth;
  
  // Estimate the image aspect width and height in pixels.
  uint estHeight = rows*40;
  uint estWidth  = cols*(20+QMAX(baseMaxLabelWidth,superMaxLabelWidth));
  //printf("Estimated size %d x %d\n",estWidth,estHeight);
  
  const float pageWidth = 14.0f; // estimated page width in cm.
                                 // Somewhat lower to deal with estimation
                                 // errors. 
  
  // compute the image height in centimeters based on the estimates
  float realHeight = QMIN(rows,12); // real height in cm
  float realWidth  = realHeight * estWidth/(float)estHeight;
  if (realWidth>pageWidth) // assume that the page width is about 15 cm
  {
    realHeight*=pageWidth/realWidth; 
    realWidth=pageWidth;
  }

  //output << "}\n";
  output << "\\begin{figure}[H]\n"
            "\\begin{center}\n"
            "\\leavevmode\n";
  output << "\\includegraphics[height=" << realHeight << "cm]{" 
                                        << fileName << "}" << endl;
  output << "\\end{center}\n"
            "\\end{figure}\n";
  
  //printf("writeFigure rows=%d cols=%d\n",rows,cols);

  QCString epsBaseName=(QCString)path+"/"+fileName;
  QCString epsName=epsBaseName+".eps";
  QFile f1;
  f1.setName(epsName.data());
  if (!f1.open(IO_WriteOnly))
  {
    err("Could not open file %s for writing\n",f1.name().data());
    exit(1);
  }
  FTextStream t(&f1);
  
  //printf("writeEPS() rows=%d cols=%d\n",rows,cols);
  
  // generate EPS header and postscript variables and procedures
  
  t << "%!PS-Adobe-2.0 EPSF-2.0\n";
  t << "%%Title: ClassName\n";
  t << "%%Creator: Doxygen\n";
  t << "%%CreationDate: Time\n";
  t << "%%For: \n";
  t << "%Magnification: 1.00\n";
  t << "%%Orientation: Portrait\n";
  t << "%%BoundingBox: 0 0 500 " << estHeight*500.0/(float)estWidth << "\n";
  t << "%%Pages: 0\n";
  t << "%%BeginSetup\n";
  t << "%%EndSetup\n";
  t << "%%EndComments\n";
  t << "\n";
  t << "% ----- variables -----\n";
  t << "\n";
  t << "/boxwidth 0 def\n";
  t << "/boxheight 40 def\n";
  t << "/fontheight 24 def\n";
  t << "/marginwidth 10 def\n";
  t << "/distx 20 def\n";
  t << "/disty 40 def\n";
  t << "/boundaspect " << estWidth/(float)estHeight << " def  % aspect ratio of the BoundingBox (width/height)\n";
  t << "/boundx 500 def\n";
  t << "/boundy boundx boundaspect div def\n";
  t << "/xspacing 0 def\n";
  t << "/yspacing 0 def\n";
  t << "/rows " << rows << " def\n";
  t << "/cols " << cols << " def\n";
  t << "/scalefactor 0 def\n";
  t << "/boxfont /Times-Roman findfont fontheight scalefont def\n";
  t << "\n";
  t << "% ----- procedures -----\n";
  t << "\n";
  t << "/dotted { [1 4] 0 setdash } def\n";
  t << "/dashed { [5] 0 setdash } def\n";
  t << "/solid  { [] 0 setdash } def\n";
  t << "\n";
  t << "/max % result = MAX(arg1,arg2)\n";
  t << "{\n";
  t << "  /a exch def\n";
  t << "  /b exch def\n";
  t << "  a b gt {a} {b} ifelse\n";
  t << "} def\n";
  t << "\n";
  t << "/xoffset % result = MAX(0,(scalefactor-(boxwidth*cols+distx*(cols-1)))/2)\n";
  t << "{\n";
  t << "  0 scalefactor boxwidth cols mul distx cols 1 sub mul add sub 2 div max\n";
  t << "} def\n";
  t << "\n";
  t << "/cw % boxwidth = MAX(boxwidth, stringwidth(arg1))\n";
  t << "{\n";
  t << "  /str exch def\n";
  t << "  /boxwidth boxwidth str stringwidth pop max def\n";
  t << "} def\n";
  t << "\n";
  t << "/box % draws a box with text `arg1' at grid pos (arg2,arg3)\n";
  t << "{ gsave\n";
  t << "  2 setlinewidth\n";
  t << "  newpath\n";
  t << "  exch xspacing mul xoffset add\n";
  t << "  exch yspacing mul\n";
  t << "  moveto\n";
  t << "  boxwidth 0 rlineto \n";
  t << "  0 boxheight rlineto \n";
  t << "  boxwidth neg 0 rlineto \n";
  t << "  0 boxheight neg rlineto \n";
  t << "  closepath\n";
  t << "  dup stringwidth pop neg boxwidth add 2 div\n";
  t << "  boxheight fontheight 2 div sub 2 div\n";
  t << "  rmoveto show stroke\n";
  t << "  grestore\n";
  t << "} def  \n";
  t << "\n";
  t << "/mark\n";
  t << "{ newpath\n";
  t << "  exch xspacing mul xoffset add boxwidth add\n";
  t << "  exch yspacing mul\n";
  t << "  moveto\n";
  t << "  0 boxheight 4 div rlineto\n";
  t << "  boxheight neg 4 div boxheight neg 4 div rlineto\n";
  t << "  closepath\n";
  t << "  eofill\n";
  t << "  stroke\n";
  t << "} def\n";
  t << "\n";
  t << "/arrow\n";
  t << "{ newpath\n";
  t << "  moveto\n";
  t << "  3 -8 rlineto\n";
  t << "  -6 0 rlineto\n";
  t << "  3 8 rlineto\n";
  t << "  closepath\n";
  t << "  eofill\n";
  t << "  stroke\n";
  t << "} def\n";
  t << "\n";
  t << "/out % draws an output connector for the block at (arg1,arg2)\n";
  t << "{\n";
  t << "  newpath\n";
  t << "  exch xspacing mul xoffset add boxwidth 2 div add\n";
  t << "  exch yspacing mul boxheight add\n";
  t << "  /y exch def\n";
  t << "  /x exch def\n";
  t << "  x y moveto\n";
  t << "  0 disty 2 div rlineto \n";
  t << "  stroke\n";
  t << "  1 eq { x y disty 2 div add arrow } if\n";
  t << "} def\n";
  t << "\n";
  t << "/in % draws an input connector for the block at (arg1,arg2)\n";
  t << "{\n";
  t << "  newpath\n";
  t << "  exch xspacing mul xoffset add boxwidth 2 div add\n";
  t << "  exch yspacing mul disty 2 div sub\n";
  t << "  /y exch def\n";
  t << "  /x exch def\n";
  t << "  x y moveto\n";
  t << "  0 disty 2 div rlineto\n";
  t << "  stroke\n";
  t << "  1 eq { x y disty 2 div add arrow } if\n";
  t << "} def\n";
  t << "\n";
  t << "/hedge\n";
  t << "{\n";
  t << "  exch xspacing mul xoffset add boxwidth 2 div add\n";
  t << "  exch yspacing mul boxheight 2 div sub\n";
  t << "  /y exch def\n";
  t << "  /x exch def\n";
  t << "  newpath\n";
  t << "  x y moveto\n";
  t << "  boxwidth 2 div distx add 0 rlineto\n";
  t << "  stroke\n";
  t << "  1 eq\n";
  t << "  { newpath x boxwidth 2 div distx add add y moveto\n";
  t << "    -8 3 rlineto\n";
  t << "    0 -6 rlineto\n";
  t << "    8 3 rlineto\n";
  t << "    closepath\n";
  t << "    eofill\n";
  t << "    stroke\n";
  t << "  } if\n";
  t << "} def\n";
  t << "\n";
  t << "/vedge\n";
  t << "{\n";
  t << "  /ye exch def\n";
  t << "  /ys exch def\n";
  t << "  /xs exch def\n";
  t << "  newpath\n";
  t << "  xs xspacing mul xoffset add boxwidth 2 div add dup\n";
  t << "  ys yspacing mul boxheight 2 div sub\n";
  t << "  moveto\n";
  t << "  ye yspacing mul boxheight 2 div sub\n";
  t << "  lineto\n";
  t << "  stroke\n";
  t << "} def\n";
  t << "\n";
  t << "/conn % connections the blocks from col `arg1' to `arg2' of row `arg3'\n";
  t << "{\n";
  t << "  /ys exch def\n";
  t << "  /xe exch def\n";
  t << "  /xs exch def\n";
  t << "  newpath\n";
  t << "  xs xspacing mul xoffset add boxwidth 2 div add\n";
  t << "  ys yspacing mul disty 2 div sub\n";
  t << "  moveto\n";
  t << "  xspacing xe xs sub mul 0\n";
  t << "  rlineto\n";
  t << "  stroke\n";
  t << "} def\n";
  t << "\n";
  t << "% ----- main ------\n";
  t << "\n";
  t << "boxfont setfont\n";
  t << "1 boundaspect scale\n";


  bool done=FALSE;
  QListIterator<DiagramRow> bit(*base);
  DiagramRow *dr;
  for (;(dr=bit.current()) && !done;++bit)
  {
    QListIterator<DiagramItem> rit(*dr);
    DiagramItem *di;
    for (;(di=rit.current());++rit)
    {
      done=di->isInList();
      t << "(" << di->label() << ") cw\n";
    }
  }
  QListIterator<DiagramRow> sit(*super);
  ++sit;
  done=FALSE;
  for (;(dr=sit.current()) && !done;++sit)
  {
    QListIterator<DiagramItem> rit(*dr);
    DiagramItem *di;
    for (;(di=rit.current());++rit)
    {
      done=di->isInList();
      t << "(" << di->label() << ") cw\n";
    }
  }

  t << "/boxwidth boxwidth marginwidth 2 mul add def\n"
    << "/xspacing boxwidth distx add def\n"
    << "/yspacing boxheight disty add def\n"
    << "/scalefactor \n"
    << "  boxwidth cols mul distx cols 1 sub mul add\n"
    << "  boxheight rows mul disty rows 1 sub mul add boundaspect mul \n"
    << "  max def\n"
    << "boundx scalefactor div boundy scalefactor div scale\n";
  
  t << "\n% ----- classes -----\n\n";
  base->drawBoxes(t,0,TRUE,FALSE,baseRows,superRows,0,0);
  super->drawBoxes(t,0,FALSE,FALSE,baseRows,superRows,0,0);
  
  t << "\n% ----- relations -----\n\n";
  base->drawConnectors(t,0,TRUE,FALSE,baseRows,superRows,0,0);
  super->drawConnectors(t,0,FALSE,FALSE,baseRows,superRows,0,0);

  f1.close();
  if (Config_getBool(USE_PDFLATEX))
  {
    QCString epstopdfArgs(4096);
    epstopdfArgs.sprintf("\"%s.eps\" --outfile=\"%s.pdf\"",
                   epsBaseName.data(),epsBaseName.data());
    //printf("Converting eps using `%s'\n",epstopdfArgs.data());
    portable_sysTimerStart();
    if (portable_system("epstopdf",epstopdfArgs)!=0)
    {
       err("Problems running epstopdf. Check your TeX installation!\n");
       portable_sysTimerStop();
       return;
    }
    portable_sysTimerStop();
  }
}