static void Move_Segment(WinEDA_DrawPanel * panel, wxDC * DC, bool erase)
/************************************************************************/
/* redessin du contour du Segment Edge lors des deplacements de la souris */
{
BASE_SCREEN * screen = panel->GetScreen();
EDGE_MODULE * Edge = (EDGE_MODULE * ) screen->m_CurrentItem;
if( Edge == NULL ) return;
MODULE * Module = (MODULE*) Edge->m_Parent;
screen->Trace_Curseur(panel, DC);
if( erase )
{
Edge->Draw(panel, DC, MoveVector, GR_XOR);
}
MoveVector.x = -(screen->m_Curseur.x - CursorInitialPosition.x);
MoveVector.y = -(screen->m_Curseur.y - CursorInitialPosition.y);
Edge->Draw(panel, DC, MoveVector, GR_XOR);
screen->Trace_Curseur(panel, DC);
Module->Set_Rectangle_Encadrement();
}
static void Exit_EditEdge_Module(WinEDA_DrawFrame * frame, wxDC * DC)
/******************************************************************/
{
EDGE_MODULE * Edge = (EDGE_MODULE * ) frame->GetScreen()->m_CurrentItem;
if( Edge && (Edge->m_StructType == TYPEEDGEMODULE) ) /* error si non */
{
if (Edge->m_Flags & IS_NEW) /* effacement du nouveau contour */
{
MODULE * Module = (MODULE *) Edge->m_Parent;
Edge->Draw(frame->DrawPanel, DC, MoveVector, GR_XOR);
DeleteStructure(Edge);
Module->Set_Rectangle_Encadrement();
}
else
{
Edge->Draw(frame->DrawPanel, DC, MoveVector, GR_XOR);
Edge->m_Flags = 0;
Edge->Draw(frame->DrawPanel, DC, wxPoint(0, 0), GR_OR);
}
}
frame->GetScreen()->ManageCurseur = NULL;
frame->GetScreen()->ForceCloseManageCurseur = NULL;
frame->GetScreen()->m_CurrentItem = NULL;
}
static void ShowEdgeModule(WinEDA_DrawPanel * panel, wxDC * DC, bool erase)
/************************************************************************/
/* Affiche le segment Edge Module en cours de trace
*/
{
BASE_SCREEN * screen = panel->GetScreen();
EDGE_MODULE * Edge = (EDGE_MODULE * ) screen->m_CurrentItem;
if( Edge == NULL ) return;
MODULE * Module = (MODULE*) Edge->m_Parent;
screen->Trace_Curseur(panel, DC);
// if( erase )
{
Edge->Draw(panel, DC, wxPoint(0, 0), GR_XOR);
}
Edge->m_End = screen->m_Curseur;
/* Mise a jour des coord relatives */
Edge->m_End0.x = Edge->m_End.x - Module->m_Pos.x;
Edge->m_End0.y = Edge->m_End.y - Module->m_Pos.y ;
RotatePoint((int*)&Edge->m_End0.x,
(int*)&Edge->m_End0.y, - Module->m_Orient);
Edge->Draw(panel, DC, wxPoint(0, 0), GR_XOR);
screen->Trace_Curseur(panel, DC);
Module->Set_Rectangle_Encadrement();
}
void MODULE::MoveAnchorPosition( const wxPoint& aMoveVector )
{
/* Move the reference point of the footprint
* the footprints elements (pads, outlines, edges .. ) are moved
* but:
* - the footprint position is not modified.
* - the relative (local) coordinates of these items are modified
*/
wxPoint footprintPos = GetPosition();
/* Update the relative coordinates:
* The coordinates are relative to the anchor point.
* Calculate deltaX and deltaY from the anchor. */
wxPoint moveVector = aMoveVector;
RotatePoint( &moveVector, -GetOrientation() );
// Update of the reference and value.
m_Reference->SetPos0( m_Reference->GetPos0() + moveVector );
m_Reference->SetDrawCoord();
m_Value->SetPos0( m_Value->GetPos0() + moveVector );
m_Value->SetDrawCoord();
// Update the pad local coordinates.
for( D_PAD* pad = Pads(); pad; pad = pad->Next() )
{
pad->SetPos0( pad->GetPos0() + moveVector );
pad->SetPosition( pad->GetPos0() + footprintPos );
}
// Update the draw element coordinates.
for( EDA_ITEM* item = GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = static_cast<EDGE_MODULE*>( item );
edge->m_Start0 += moveVector;
edge->m_End0 += moveVector;
edge->SetDrawCoord();
break;
}
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( item );
text->SetPos0( text->GetPos0() + moveVector );
text->SetDrawCoord();
break;
}
default:
break;
}
}
CalculateBoundingBox();
}
int DRAWING_TOOL::DrawLine( const TOOL_EVENT& aEvent )
{
boost::optional<VECTOR2D> startingPoint;
if( m_editModules )
{
m_frame->SetToolID( ID_MODEDIT_LINE_TOOL, wxCURSOR_PENCIL, _( "Add graphic line" ) );
EDGE_MODULE* line = new EDGE_MODULE( m_board->m_Modules );
while( drawSegment( S_SEGMENT, reinterpret_cast<DRAWSEGMENT*&>( line ), startingPoint ) )
{
if( line )
{
m_frame->OnModify();
m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
line->SetParent( m_board->m_Modules );
line->SetLocalCoord();
m_board->m_Modules->GraphicalItems().PushFront( line );
startingPoint = line->GetEnd();
}
else
{
startingPoint = boost::none;
}
line = new EDGE_MODULE( m_board->m_Modules );
}
}
else // !m_editModules case
{
m_frame->SetToolID( ID_PCB_ADD_LINE_BUTT, wxCURSOR_PENCIL, _( "Add graphic line" ) );
DRAWSEGMENT* line = new DRAWSEGMENT;
while( drawSegment( S_SEGMENT, line, startingPoint ) )
{
if( line )
{
m_board->Add( line );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( line, UR_NEW );
startingPoint = line->GetEnd();
}
else
{
startingPoint = boost::none;
}
line = new DRAWSEGMENT;
}
}
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
/* Redraw the current graphic item during its creation
* Use this function to show a new outline, in begin command
*/
static void ShowNewEdgeModule( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
BASE_SCREEN* screen = aPanel->GetScreen();
EDGE_MODULE* edge = (EDGE_MODULE*) screen->GetCurItem();
if( edge == NULL )
return;
MODULE* module = (MODULE*) edge->GetParent();
// if( erase )
{
edge->Draw( aPanel, aDC, GR_XOR );
}
edge->SetEnd( aPanel->GetParent()->GetCrossHairPosition() );
// Update relative coordinate.
edge->SetEnd0( edge->GetEnd() - module->GetPosition() );
wxPoint pt( edge->GetEnd0() );
RotatePoint( &pt, -module->GetOrientation() );
edge->SetEnd0( pt );
edge->Draw( aPanel, aDC, GR_XOR );
module->CalculateBoundingBox();
}
/* abort function in moving outline.
*/
static void Abort_Move_ModuleOutline( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
EDGE_MODULE* edge = (EDGE_MODULE*) Panel->GetScreen()->GetCurItem();
Panel->SetMouseCapture( NULL, NULL );
if( edge && ( edge->Type() == PCB_MODULE_EDGE_T ) )
{
if( edge->IsNew() ) // On aborting, delete new outline.
{
MODULE* module = (MODULE*) edge->GetParent();
edge->Draw( Panel, DC, GR_XOR, MoveVector );
edge->DeleteStructure();
module->CalculateBoundingBox();
}
else // On aborting, move existing outline to its initial position.
{
edge->Draw( Panel, DC, GR_XOR, MoveVector );
edge->ClearFlags();
edge->Draw( Panel, DC, GR_OR );
}
}
Panel->GetScreen()->SetCurItem( NULL );
}
void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
/*******************************************************************/
/* Copy values in text control to the item parameters
*/
{
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( layer );
if( m_item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360(angle);
m_item->SetAngle( angle );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
Close( true );
}
/* Move marked items, at new position = old position + offset
*/
void MoveMarkedItems( MODULE* module, wxPoint offset )
{
EDA_ITEM* item;
if( module == NULL )
return;
if( module->Reference().IsSelected() )
module->Reference().Move( offset );
if( module->Value().IsSelected() )
module->Value().Move( offset );
D_PAD* pad = module->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->SetPosition( pad->GetPosition() + offset );
pad->SetPos0( pad->GetPos0() + offset );
}
item = module->GraphicalItems();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
static_cast<TEXTE_MODULE*>( item )->Move( offset );
break;
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
em->SetStart( em->GetStart() + offset );
em->SetEnd( em->GetEnd() + offset );
em->SetStart0( em->GetStart0() + offset );
em->SetEnd0( em->GetEnd0() + offset );
}
break;
default:
;
}
}
ClearMarkItems( module );
}
// Plot footprints graphic items (outlines)
void BRDITEMS_PLOTTER::Plot_Edges_Modules()
{
for( MODULE* module = m_board->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems().GetFirst(); item; item = item->Next() )
{
EDGE_MODULE* edge = dyn_cast<EDGE_MODULE*>( item );
if( !edge || !m_layerMask[edge->GetLayer()] )
continue;
Plot_1_EdgeModule( edge );
}
}
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataFromWindow()
{
if( !DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataFromWindow() )
return false;
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return false;;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( ToLAYER_ID( layer ) );
if( m_item->GetShape() == S_ARC )
{
m_item->SetAngle( m_AngleValue * 10.0 );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
return true;
}
/* Move marked items, at new position = old position + offset
*/
void MoveMarkedItems( MODULE* module, wxPoint offset )
{
EDA_ITEM* item;
if( module == NULL )
return;
D_PAD* pad = module->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->SetPosition( pad->GetPosition() + offset );
pad->SetPos0( pad->GetPos0() + offset );
}
item = module->GraphicalItems();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
tm->Offset( offset );
tm->SetPos0( tm->GetPos0() + offset );
}
break;
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
em->SetStart( em->GetStart() + offset );
em->SetEnd( em->GetEnd() + offset );
em->SetStart0( em->GetStart0() + offset );
em->SetEnd0( em->GetEnd0() + offset );
}
break;
default:
;
}
item->ClearFlags();
}
}
int DRAWING_TOOL::DrawCircle( const TOOL_EVENT& aEvent )
{
if( m_editModules )
{
m_frame->SetToolID( ID_MODEDIT_CIRCLE_TOOL, wxCURSOR_PENCIL, _( "Add graphic circle" ) );
EDGE_MODULE* circle = new EDGE_MODULE( m_board->m_Modules );
while( drawSegment( S_CIRCLE, reinterpret_cast<DRAWSEGMENT*&>( circle ) ) )
{
if( circle )
{
m_frame->OnModify();
m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
circle->SetParent( m_board->m_Modules );
circle->SetLocalCoord();
m_board->m_Modules->GraphicalItems().PushFront( circle );
}
circle = new EDGE_MODULE( m_board->m_Modules );
}
}
else // !m_editModules case
{
m_frame->SetToolID( ID_PCB_CIRCLE_BUTT, wxCURSOR_PENCIL, _( "Add graphic circle" ) );
DRAWSEGMENT* circle = new DRAWSEGMENT;
while( drawSegment( S_CIRCLE, circle ) )
{
if( circle )
{
m_board->Add( circle );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( circle, UR_NEW );
}
circle = new DRAWSEGMENT;
}
}
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
int DRAWING_TOOL::DrawArc( const TOOL_EVENT& aEvent )
{
if( m_editModules )
{
m_frame->SetToolID( ID_MODEDIT_ARC_TOOL, wxCURSOR_PENCIL, _( "Add graphic arc" ) );
EDGE_MODULE* arc = new EDGE_MODULE( m_board->m_Modules );
while( drawArc( reinterpret_cast<DRAWSEGMENT*&>( arc ) ) )
{
if( arc )
{
m_frame->OnModify();
m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
arc->SetParent( m_board->m_Modules );
arc->SetLocalCoord();
m_board->m_Modules->GraphicalItems().PushFront( arc );
}
arc = new EDGE_MODULE( m_board->m_Modules );
}
}
else // !m_editModules case
{
m_frame->SetToolID( ID_PCB_ARC_BUTT, wxCURSOR_PENCIL, _( "Add graphic arc" ) );
DRAWSEGMENT* arc = new DRAWSEGMENT;
while( drawArc( arc ) )
{
if( arc )
{
m_board->Add( arc );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( arc, UR_NEW );
}
arc = new DRAWSEGMENT;
}
}
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
void MODULE::SetOrientation( double newangle )
{
double angleChange = newangle - m_Orient; // change in rotation
wxPoint pt;
NORMALIZE_ANGLE_POS( newangle );
m_Orient = newangle;
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
{
pt = pad->GetPos0();
pad->SetOrientation( pad->GetOrientation() + angleChange );
RotatePoint( &pt, m_Orient );
pad->SetPosition( GetPosition() + pt );
}
// Update of the reference and value.
m_Reference->SetDrawCoord();
m_Value->SetDrawCoord();
// Displace contours and text of the footprint.
for( BOARD_ITEM* item = m_Drawings; item; item = item->Next() )
{
if( item->Type() == PCB_MODULE_EDGE_T )
{
EDGE_MODULE* edge = (EDGE_MODULE*) item;
edge->SetDrawCoord();
}
else if( item->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE* text = (TEXTE_MODULE*) item;
text->SetDrawCoord();
}
}
CalculateBoundingBox();
}
/* Redraw the current moved graphic item when mouse is moving
* Use this function to show an existing outline, in move command
*/
static void ShowCurrentOutlineWhileMoving( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
const wxPoint& aPosition, bool aErase )
{
BASE_SCREEN* screen = aPanel->GetScreen();
EDGE_MODULE* edge = (EDGE_MODULE*) screen->GetCurItem();
if( edge == NULL )
return;
MODULE* module = (MODULE*) edge->GetParent();
if( aErase )
{
edge->Draw( aPanel, aDC, GR_XOR, MoveVector );
}
MoveVector = -(aPanel->GetParent()->GetCrossHairPosition() - CursorInitialPosition);
edge->Draw( aPanel, aDC, GR_XOR, MoveVector );
module->CalculateBoundingBox();
}
void PCB_POLYGON::AddToModule( MODULE* aModule )
{
if( IsNonCopperLayer( m_KiCadLayer ) )
{
EDGE_MODULE* dwg = new EDGE_MODULE( aModule, S_POLYGON );
aModule->GraphicalItemsList().PushBack( dwg );
dwg->SetWidth( 0 );
dwg->SetLayer( m_KiCadLayer );
auto outline = new std::vector<wxPoint>;
for( auto point : m_outline )
outline->push_back( wxPoint( point->x, point->y ) );
dwg->SetPolyPoints( *outline );
dwg->SetStart0( *outline->begin() );
dwg->SetEnd0( outline->back() );
dwg->SetDrawCoord();
delete( outline );
}
}
/** Rotate marked items, refer to a rotation point at position offset
* Note: because this function is used in global transform,
* if force_all is true, all items will be rotated
*/
void RotateMarkedItems( MODULE* module, wxPoint offset, bool force_all )
{
#define ROTATE( z ) RotatePoint( (&z), offset, 900 )
if( module == NULL )
return;
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( !pad->IsSelected() && !force_all )
continue;
wxPoint pos = pad->GetPosition();
ROTATE( pos );
pad->SetPosition( pos );
pad->SetPos0( pad->GetPosition() );
pad->SetOrientation( pad->GetOrientation() + 900 );
}
for( EDA_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( !item->IsSelected() && !force_all)
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
wxPoint tmp = em->GetStart();
ROTATE( tmp );
em->SetStart( tmp );
em->SetStart0( tmp );
tmp = em->GetEnd();
ROTATE( tmp );
em->SetEnd( tmp );
em->SetEnd0( tmp );
}
break;
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
wxPoint pos = tm->GetTextPosition();
ROTATE( pos );
tm->SetTextPosition( pos );
tm->SetPos0( tm->GetTextPosition() );
tm->SetOrientation( tm->GetOrientation() + 900 );
}
break;
default:
;
}
item->ClearFlags();
}
}
MODULE* MWAVE::CreateMicrowaveInductor( INDUCTOR_PATTERN& inductorPattern,
PCB_EDIT_FRAME* aPcbFrame, wxString& aErrorMessage )
{
/* Build a microwave inductor footprint.
* - Length Mself.lng
* - Extremities Mself.m_Start and Mself.m_End
* We must determine:
* Mself.nbrin = number of segments perpendicular to the direction
* (The coil nbrin will demicercles + 1 + 2 1 / 4 circle)
* Mself.lbrin = length of a strand
* Mself.radius = radius of rounded parts of the coil
* Mself.delta = segments extremities connection between him and the coil even
*
* The equations are
* Mself.m_Size.x = 2 * Mself.radius + Mself.lbrin
* Mself.m_Size.y * Mself.delta = 2 + 2 * Mself.nbrin * Mself.radius
* Mself.lng = 2 * Mself.delta / / connections to the coil
+ (Mself.nbrin-2) * Mself.lbrin / / length of the strands except 1st and last
+ (Mself.nbrin 1) * (PI * Mself.radius) / / length of rounded
* Mself.lbrin + / 2 - Melf.radius * 2) / / length of 1st and last bit
*
* The constraints are:
* Nbrin >= 2
* Mself.radius < Mself.m_Size.x
* Mself.m_Size.y = Mself.radius * 4 + 2 * Mself.raccord
* Mself.lbrin> Mself.radius * 2
*
* The calculation is conducted in the following way:
* Initially:
* Nbrin = 2
* Radius = 4 * m_Size.x (arbitrarily fixed value)
* Then:
* Increasing the number of segments to the desired length
* (Radius decreases if necessary)
*/
D_PAD* pad;
int ll;
wxString msg;
auto pt = inductorPattern.m_End - inductorPattern.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
inductorPattern.m_length = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, inductorPattern.m_length );
wxTextEntryDialog dlg( nullptr, wxEmptyString, _( "Length of Trace:" ), msg );
if( dlg.ShowModal() != wxID_OK )
return nullptr; // canceled by user
msg = dlg.GetValue();
inductorPattern.m_length = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( inductorPattern.m_length < min_len )
{
aErrorMessage = _( "Requested length < minimum length" );
return nullptr;
}
// Calculate the elements.
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, inductorPattern.m_Start,
inductorPattern.m_End, inductorPattern.m_length,
inductorPattern.m_Width );
if( !ll )
{
aErrorMessage = _( "Requested length too large" );
return nullptr;
}
// Generate footprint. the value is also used as footprint name.
msg = "L";
wxTextEntryDialog cmpdlg( nullptr, wxEmptyString, _( "Component Value:" ), msg );
cmpdlg.SetTextValidator( FILE_NAME_CHAR_VALIDATOR( &msg ) );
if( ( cmpdlg.ShowModal() != wxID_OK ) || msg.IsEmpty() )
return nullptr; // Aborted by user
MODULE* module = aPcbFrame->CreateNewModule( msg );
// here the module is already in the BOARD, CreateNewModule() does that.
module->SetFPID( LIB_ID( wxString( "mw_inductor" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( inductorPattern.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( inductorPattern.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItemsList().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->PadsList().PushFront( pad );
pad->SetName( "1" );
pad->SetPosition( inductorPattern.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( inductorPattern.m_Width, inductorPattern.m_Width ) );
pad->SetLayerSet( LSET( module->GetLayer() ) );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetShape( PAD_SHAPE_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->PadsList().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetName( "2" );
pad->SetPosition( inductorPattern.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
wxPoint refPos( ( inductorPattern.m_Start.x + inductorPattern.m_End.x ) / 2,
( inductorPattern.m_Start.y + inductorPattern.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetTextSize().y;
module->Reference().SetPosition( refPos );
valPos.y += module->Value().GetTextSize().y;
module->Value().SetPosition( valPos );
module->CalculateBoundingBox();
return module;
}
void MODULE::Copy( MODULE* aModule )
{
m_Pos = aModule->m_Pos;
m_Layer = aModule->m_Layer;
m_fpid = aModule->m_fpid;
m_Attributs = aModule->m_Attributs;
m_ModuleStatus = aModule->m_ModuleStatus;
m_Orient = aModule->m_Orient;
m_BoundaryBox = aModule->m_BoundaryBox;
m_CntRot90 = aModule->m_CntRot90;
m_CntRot180 = aModule->m_CntRot180;
m_LastEditTime = aModule->m_LastEditTime;
m_Link = aModule->m_Link;
m_Path = aModule->m_Path; //is this correct behavior?
SetTimeStamp( GetNewTimeStamp() );
m_LocalClearance = aModule->m_LocalClearance;
m_LocalSolderMaskMargin = aModule->m_LocalSolderMaskMargin;
m_LocalSolderPasteMargin = aModule->m_LocalSolderPasteMargin;
m_LocalSolderPasteMarginRatio = aModule->m_LocalSolderPasteMarginRatio;
m_ZoneConnection = aModule->m_ZoneConnection;
m_ThermalWidth = aModule->m_ThermalWidth;
m_ThermalGap = aModule->m_ThermalGap;
// Copy reference and value.
m_Reference->Copy( aModule->m_Reference );
m_Value->Copy( aModule->m_Value );
// Copy auxiliary data: Pads
m_Pads.DeleteAll();
for( D_PAD* pad = aModule->m_Pads; pad; pad = pad->Next() )
{
D_PAD* newpad = new D_PAD( this );
newpad->Copy( pad );
m_Pads.PushBack( newpad );
}
// Copy auxiliary data: Drawings
m_Drawings.DeleteAll();
for( BOARD_ITEM* item = aModule->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* textm = new TEXTE_MODULE( this );
textm->Copy( static_cast<TEXTE_MODULE*>( item ) );
m_Drawings.PushBack( textm );
break;
}
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE * edge;
edge = new EDGE_MODULE( this );
edge->Copy( (EDGE_MODULE*) item );
m_Drawings.PushBack( edge );
break;
}
default:
wxLogMessage( wxT( "MODULE::Copy() Internal Err: unknown type" ) );
break;
}
}
// Copy auxiliary data: 3D_Drawings info
m_3D_Drawings.DeleteAll();
// Ensure there is one (or more) item in m_3D_Drawings
m_3D_Drawings.PushBack( new S3D_MASTER( this ) ); // push a void item
for( S3D_MASTER* item = aModule->m_3D_Drawings; item; item = item->Next() )
{
if( item->GetShape3DName().IsEmpty() ) // do not copy empty shapes.
continue;
S3D_MASTER* t3d = m_3D_Drawings;
if( t3d && t3d->GetShape3DName().IsEmpty() ) // The first entry can
{ // exist, but is empty : use it.
t3d->Copy( item );
}
else
{
t3d = new S3D_MASTER( this );
t3d->Copy( item );
m_3D_Drawings.PushBack( t3d );
}
}
m_Doc = aModule->m_Doc;
m_KeyWord = aModule->m_KeyWord;
// Ensure auxiliary data is up to date
CalculateBoundingBox();
}
/** Mirror marked items, refer to a Vertical axis at position offset
* Note: because this function is used in global transform,
* if force_all is true, all items will be mirrored
*/
void MirrorMarkedItems( MODULE* module, wxPoint offset, bool force_all )
{
#define SETMIRROR( z ) (z) -= offset.x; (z) = -(z); (z) += offset.x;
wxPoint tmp;
wxSize tmpz;
if( module == NULL )
return;
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
// Skip pads not selected, i.e. not inside the block to mirror:
if( !pad->IsSelected() && !force_all )
continue;
tmp = pad->GetPosition();
SETMIRROR( tmp.x );
pad->SetPosition( tmp );
pad->SetX0( pad->GetPosition().x );
tmp = pad->GetOffset();
NEGATE( tmp.x );
pad->SetOffset( tmp );
tmpz = pad->GetDelta();
NEGATE( tmpz.x );
pad->SetDelta( tmpz );
pad->SetOrientation( 1800 - pad->GetOrientation() );
}
for( EDA_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
// Skip items not selected, i.e. not inside the block to mirror:
if( !item->IsSelected() && !force_all )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
tmp = em->GetStart0();
SETMIRROR( tmp.x );
em->SetStart0( tmp );
em->SetStartX( tmp.x );
tmp = em->GetEnd0();
SETMIRROR( tmp.x );
em->SetEnd0( tmp );
em->SetEndX( tmp.x );
em->SetAngle( -em->GetAngle() );
}
break;
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
tmp = tm->GetTextPosition();
SETMIRROR( tmp.x );
tm->SetTextPosition( tmp );
tmp.y = tm->GetPos0().y;
tm->SetPos0( tmp );
}
break;
default:
break;
}
item->ClearFlags();
}
}
/* generate shapes of graphic items (outlines) on layer aLayer as polygons,
* and adds these polygons to aCornerBuffer
* aCornerBuffer = the buffer to store polygons
* aInflateValue = a value to inflate shapes
* aCircleToSegmentsCount = number of segments to approximate a circle
* aCorrectionFactor = the correction to apply to the circle radius
* to generate the polygon.
* if aCorrectionFactor = 1.0, the polygon is inside the circle
* the radius of circle approximated by segments is
* initial radius * aCorrectionFactor
*/
void MODULE::TransformGraphicShapesWithClearanceToPolygonSet(
LAYER_NUM aLayer,
CPOLYGONS_LIST& aCornerBuffer,
int aInflateValue,
int aCircleToSegmentsCount,
double aCorrectionFactor )
{
std::vector<TEXTE_MODULE *> texts; // List of TEXTE_MODULE to convert
EDGE_MODULE* outline;
for( EDA_ITEM* item = GraphicalItems(); item != NULL; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
if( ((TEXTE_MODULE*)item)->GetLayer() == aLayer )
texts.push_back( (TEXTE_MODULE *) item );
break;
case PCB_MODULE_EDGE_T:
outline = (EDGE_MODULE*) item;
if( outline->GetLayer() != aLayer )
break;
switch( outline->GetShape() )
{
case S_SEGMENT:
TransformRoundedEndsSegmentToPolygon( aCornerBuffer,
outline->GetStart(),
outline->GetEnd(),
aCircleToSegmentsCount,
outline->GetWidth() );
break;
case S_CIRCLE:
TransformRingToPolygon( aCornerBuffer, outline->GetCenter(),
outline->GetRadius(), aCircleToSegmentsCount,
outline->GetWidth() );
break;
case S_ARC:
TransformArcToPolygon( aCornerBuffer,
outline->GetCenter(), outline->GetArcStart(),
outline->GetAngle(),
aCircleToSegmentsCount, outline->GetWidth() );
break;
case S_POLYGON:
// for outline shape = S_POLYGON:
// We must compute true coordinates from m_PolyPoints
// which are relative to module position and module orientation = 0
for( unsigned ii = 0; ii < outline->GetPolyPoints().size(); ii++ )
{
CPolyPt corner( outline->GetPolyPoints()[ii] );
RotatePoint( &corner.x, &corner.y, GetOrientation() );
corner.x += GetPosition().x;
corner.y += GetPosition().y;
aCornerBuffer.Append( corner );
}
aCornerBuffer.CloseLastContour();
break;
default:
DBG( printf( "Error: Shape %d not implemented!\n",
outline->GetShape() ); )
break;
}
break;
default:
break;
}
}
static void Print_Module( EDA_DRAW_PANEL* aPanel, wxDC* aDC, MODULE* aModule,
GR_DRAWMODE aDraw_mode, LSET aMask,
PRINT_PARAMETERS::DrillShapeOptT aDrillShapeOpt )
{
// Print pads
for( D_PAD* pad = aModule->Pads(); pad; pad = pad->Next() )
{
if( !( pad->GetLayerSet() & aMask ).any() )
continue;
// Manage hole according to the print drill option
wxSize drill_tmp = pad->GetDrillSize();
switch( aDrillShapeOpt )
{
case PRINT_PARAMETERS::NO_DRILL_SHAPE:
pad->SetDrillSize( wxSize(0,0) );
break;
case PRINT_PARAMETERS::SMALL_DRILL_SHAPE:
{
wxSize sz( std::min( SMALL_DRILL, pad->GetDrillSize().x ),
std::min( SMALL_DRILL, pad->GetDrillSize().y ) );
pad->SetDrillSize( sz );
}
break;
case PRINT_PARAMETERS::FULL_DRILL_SHAPE:
// Do nothing
break;
}
pad->Draw( aPanel, aDC, aDraw_mode );
pad->SetDrillSize( drill_tmp );
}
// Print footprint graphic shapes
LSET mlayer( aModule->GetLayer() );
if( aModule->GetLayer() == B_Cu )
mlayer = LSET( B_SilkS );
else if( aModule->GetLayer() == F_Cu )
mlayer = LSET( F_SilkS );
if( ( mlayer & aMask ).any() )
{
if( aModule->Reference().IsVisible() )
aModule->Reference().Draw( aPanel, aDC, aDraw_mode );
if( aModule->Value().IsVisible() )
aModule->Value().Draw( aPanel, aDC, aDraw_mode );
}
for( EDA_ITEM* item = aModule->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
if( !( mlayer & aMask ).any() )
break;
TEXTE_MODULE* textMod = static_cast<TEXTE_MODULE*>( item );
textMod->Draw( aPanel, aDC, aDraw_mode );
break;
}
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = static_cast<EDGE_MODULE*>( item );
if( !aMask[edge->GetLayer()] )
break;
edge->Draw( aPanel, aDC, aDraw_mode );
}
break;
default:
break;
}
}
}
void POINT_EDITOR::addCorner( const VECTOR2I& aBreakPoint )
{
EDA_ITEM* item = m_editPoints->GetParent();
const SELECTION& selection = m_selectionTool->GetSelection();
if( item->Type() == PCB_ZONE_AREA_T )
{
getEditFrame<PCB_BASE_FRAME>()->OnModify();
getEditFrame<PCB_BASE_FRAME>()->SaveCopyInUndoList( selection.items, UR_CHANGED );
ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
CPolyLine* outline = zone->Outline();
// Handle the last segment, so other segments can be easily handled in a loop
unsigned int nearestIdx = outline->GetCornersCount() - 1, nextNearestIdx = 0;
SEG side( VECTOR2I( outline->GetPos( nearestIdx ) ),
VECTOR2I( outline->GetPos( nextNearestIdx ) ) );
unsigned int nearestDist = side.Distance( aBreakPoint );
for( int i = 0; i < outline->GetCornersCount() - 1; ++i )
{
side = SEG( VECTOR2I( outline->GetPos( i ) ), VECTOR2I( outline->GetPos( i + 1 ) ) );
unsigned int distance = side.Distance( aBreakPoint );
if( distance < nearestDist )
{
nearestDist = distance;
nearestIdx = i;
nextNearestIdx = i + 1;
}
}
// Find the point on the closest segment
VECTOR2I sideOrigin( outline->GetPos( nearestIdx ) );
VECTOR2I sideEnd( outline->GetPos( nextNearestIdx ) );
SEG nearestSide( sideOrigin, sideEnd );
VECTOR2I nearestPoint = nearestSide.NearestPoint( aBreakPoint );
// Do not add points that have the same coordinates as ones that already belong to polygon
// instead, add a point in the middle of the side
if( nearestPoint == sideOrigin || nearestPoint == sideEnd )
nearestPoint = ( sideOrigin + sideEnd ) / 2;
outline->InsertCorner( nearestIdx, nearestPoint.x, nearestPoint.y );
}
else if( item->Type() == PCB_LINE_T || item->Type() == PCB_MODULE_EDGE_T )
{
bool moduleEdge = item->Type() == PCB_MODULE_EDGE_T;
PCB_BASE_FRAME* frame = getEditFrame<PCB_BASE_FRAME>();
frame->OnModify();
if( moduleEdge )
frame->SaveCopyInUndoList( getModel<BOARD>()->m_Modules, UR_MODEDIT );
else
frame->SaveCopyInUndoList( selection.items, UR_CHANGED );
DRAWSEGMENT* segment = static_cast<DRAWSEGMENT*>( item );
if( segment->GetShape() == S_SEGMENT )
{
SEG seg( segment->GetStart(), segment->GetEnd() );
VECTOR2I nearestPoint = seg.NearestPoint( aBreakPoint );
// Move the end of the line to the break point..
segment->SetEnd( wxPoint( nearestPoint.x, nearestPoint.y ) );
// and add another one starting from the break point
DRAWSEGMENT* newSegment;
if( moduleEdge )
{
EDGE_MODULE* edge = static_cast<EDGE_MODULE*>( segment );
assert( segment->GetParent()->Type() == PCB_MODULE_T );
newSegment = new EDGE_MODULE( *edge );
edge->SetLocalCoord();
}
else
{
newSegment = new DRAWSEGMENT( *segment );
}
newSegment->ClearSelected();
newSegment->SetStart( wxPoint( nearestPoint.x, nearestPoint.y ) );
newSegment->SetEnd( wxPoint( seg.B.x, seg.B.y ) );
if( moduleEdge )
{
static_cast<EDGE_MODULE*>( newSegment )->SetLocalCoord();
getModel<BOARD>()->m_Modules->Add( newSegment );
}
else
{
getModel<BOARD>()->Add( newSegment );
}
getView()->Add( newSegment );
}
}
}
/* generate shapes of graphic items (outlines) on layer aLayer as polygons,
* and adds these polygons to aCornerBuffer
* aCornerBuffer = the buffer to store polygons
* aInflateValue = a value to inflate shapes
* aCircleToSegmentsCount = number of segments to approximate a circle
* aCorrectionFactor = the correction to apply to the circle radius
* to generate the polygon.
* if aCorrectionFactor = 1.0, the polygon is inside the circle
* the radius of circle approximated by segments is
* initial radius * aCorrectionFactor
*/
void MODULE::TransformGraphicShapesWithClearanceToPolygonSet( PCB_LAYER_ID aLayer,
SHAPE_POLY_SET& aCornerBuffer, int aInflateValue, int aError, bool aIncludeText ) const
{
std::vector<TEXTE_MODULE *> texts; // List of TEXTE_MODULE to convert
EDGE_MODULE* outline;
for( EDA_ITEM* item = GraphicalItemsList(); item != NULL; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( item );
if( ( aLayer != UNDEFINED_LAYER && text->GetLayer() == aLayer ) && text->IsVisible() )
texts.push_back( text );
break;
}
case PCB_MODULE_EDGE_T:
outline = (EDGE_MODULE*) item;
if( aLayer != UNDEFINED_LAYER && outline->GetLayer() != aLayer )
break;
outline->TransformShapeWithClearanceToPolygon( aCornerBuffer, 0, aError );
break;
default:
break;
}
}
if( !aIncludeText )
return;
// Convert texts sur modules
if( Reference().GetLayer() == aLayer && Reference().IsVisible() )
texts.push_back( &Reference() );
if( Value().GetLayer() == aLayer && Value().IsVisible() )
texts.push_back( &Value() );
prms.m_cornerBuffer = &aCornerBuffer;
for( unsigned ii = 0; ii < texts.size(); ii++ )
{
TEXTE_MODULE *textmod = texts[ii];
prms.m_textWidth = textmod->GetThickness() + ( 2 * aInflateValue );
prms.m_error = aError;
wxSize size = textmod->GetTextSize();
if( textmod->IsMirrored() )
size.x = -size.x;
DrawGraphicText( NULL, NULL, textmod->GetTextPos(), BLACK,
textmod->GetShownText(), textmod->GetDrawRotation(), size,
textmod->GetHorizJustify(), textmod->GetVertJustify(),
textmod->GetThickness(), textmod->IsItalic(),
true, addTextSegmToPoly, &prms );
}
}
/**
* Function PlaceCells
* Initialize the matrix routing by setting obstacles for each occupied cell
* a cell set to HOLE is an obstacle for tracks and vias
* a cell set to VIA_IMPOSSIBLE is an obstacle for vias only.
* a cell set to CELL_is_EDGE is a frontier.
* Tracks and vias having the same net code as net_code are skipped
* (htey do not are obstacles)
*
* For single-sided Routing 1:
* BOTTOM side is used, and Route_Layer_BOTTOM = Route_Layer_TOP
*
* If flag == FORCE_PADS: all pads will be put in matrix as obstacles.
*/
void PlaceCells( BOARD* aPcb, int net_code, int flag )
{
int ux0 = 0, uy0 = 0, ux1, uy1, dx, dy;
int marge, via_marge;
LAYER_MSK layerMask;
// use the default NETCLASS?
NETCLASS* nc = aPcb->m_NetClasses.GetDefault();
int trackWidth = nc->GetTrackWidth();
int clearance = nc->GetClearance();
int viaSize = nc->GetViaDiameter();
marge = clearance + (trackWidth / 2);
via_marge = clearance + (viaSize / 2);
// Place PADS on matrix routing:
for( unsigned i = 0; i < aPcb->GetPadCount(); ++i )
{
D_PAD* pad = aPcb->GetPad( i );
if( net_code != pad->GetNet() || (flag & FORCE_PADS) )
{
::PlacePad( pad, HOLE, marge, WRITE_CELL );
}
::PlacePad( pad, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
// Place outlines of modules on matrix routing, if they are on a copper layer
// or on the edge layer
TRACK tmpSegm( NULL ); // A dummy track used to create segments.
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = (EDGE_MODULE*) item;
tmpSegm.SetLayer( edge->GetLayer() );
if( tmpSegm.GetLayer() == EDGE_N )
tmpSegm.SetLayer( UNDEFINED_LAYER );
tmpSegm.SetStart( edge->GetStart() );
tmpSegm.SetEnd( edge->GetEnd() );
tmpSegm.SetShape( edge->GetShape() );
tmpSegm.SetWidth( edge->GetWidth() );
tmpSegm.m_Param = edge->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( &tmpSegm, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
break;
default:
break;
}
}
}
// Place board outlines and texts on copper layers:
for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
{
DRAWSEGMENT* DrawSegm;
int type_cell = HOLE;
DrawSegm = (DRAWSEGMENT*) item;
tmpSegm.SetLayer( DrawSegm->GetLayer() );
if( DrawSegm->GetLayer() == EDGE_N )
{
tmpSegm.SetLayer( UNDEFINED_LAYER );
type_cell |= CELL_is_EDGE;
}
tmpSegm.SetStart( DrawSegm->GetStart() );
tmpSegm.SetEnd( DrawSegm->GetEnd() );
tmpSegm.SetShape( DrawSegm->GetShape() );
tmpSegm.SetWidth( DrawSegm->GetWidth() );
tmpSegm.m_Param = DrawSegm->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, type_cell, marge, WRITE_CELL );
}
break;
case PCB_TEXT_T:
{
TEXTE_PCB* PtText;
PtText = (TEXTE_PCB*) item;
if( PtText->GetText().Length() == 0 )
break;
EDA_RECT textbox = PtText->GetTextBox( -1 );
ux0 = textbox.GetX();
uy0 = textbox.GetY();
dx = textbox.GetWidth();
dy = textbox.GetHeight();
/* Put bounding box (rectangle) on matrix */
dx /= 2;
dy /= 2;
ux1 = ux0 + dx;
uy1 = uy0 + dy;
ux0 -= dx;
uy0 -= dy;
layerMask = GetLayerMask( PtText->GetLayer() );
TraceFilledRectangle( ux0 - marge, uy0 - marge, ux1 + marge,
uy1 + marge, PtText->GetOrientation(),
layerMask, HOLE, WRITE_CELL );
TraceFilledRectangle( ux0 - via_marge, uy0 - via_marge,
ux1 + via_marge, uy1 + via_marge,
PtText->GetOrientation(),
layerMask, VIA_IMPOSSIBLE, WRITE_OR_CELL );
}
break;
default:
break;
}
}
/* Put tracks and vias on matrix */
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( net_code == track->GetNet() )
continue;
TraceSegmentPcb( track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
}
void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::initDlg()
/* Initialize messages and values in text control,
* according to the item parameters values
*/
{
SetFocus();
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText * texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch ( m_item->GetShape() )
{
case S_CIRCLE:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Point X"));
m_EndPointYLabel->SetLabel(_("Point Y"));
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
case S_ARC:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Start Point X"));
m_EndPointYLabel->SetLabel(_("Start Point Y"));
// Here the angle is a double, but the UI is still working
// with integers
msg << int( m_item->GetAngle() );
m_Angle_Ctrl->SetValue(msg);
break;
default:
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerMask( INTERNAL_CU_LAYERS|EDGE_LAYER );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _("This item has an illegal layer id.\n"
"Now, forced on the front silk screen layer. Please, fix it") );
m_LayerSelectionCtrl->SetLayerSelection( SILKSCREEN_N_FRONT );
}
}
bool DRAWING_TOOL::drawSegment( int aShape, DRAWSEGMENT*& aGraphic,
boost::optional<VECTOR2D> aStartingPoint )
{
// Only two shapes are currently supported
assert( aShape == S_SEGMENT || aShape == S_CIRCLE );
DRAWSEGMENT line45;
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( m_view );
m_view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_controls->ShowCursor( true );
m_controls->SetSnapping( true );
Activate();
bool direction45 = false; // 45 degrees only mode
bool started = false;
VECTOR2I cursorPos = m_controls->GetCursorPosition();
if( aStartingPoint )
{
LAYER_ID layer = m_frame->GetScreen()->m_Active_Layer;
// Init the new item attributes
aGraphic->SetShape( (STROKE_T) aShape );
aGraphic->SetWidth( m_lineWidth );
aGraphic->SetStart( wxPoint( aStartingPoint->x, aStartingPoint->y ) );
aGraphic->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
aGraphic->SetLayer( layer );
if( aShape == S_SEGMENT )
line45 = *aGraphic; // used only for direction 45 mode with lines
preview.Add( aGraphic );
m_controls->SetAutoPan( true );
m_controls->CaptureCursor( true );
started = true;
}
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
bool updatePreview = false; // should preview be updated
cursorPos = m_controls->GetCursorPosition();
// Enable 45 degrees lines only mode by holding control
if( direction45 != evt->Modifier( MD_CTRL ) && started && aShape == S_SEGMENT )
{
direction45 = evt->Modifier( MD_CTRL );
if( direction45 )
{
preview.Add( &line45 );
make45DegLine( aGraphic, &line45 );
}
else
{
preview.Remove( &line45 );
aGraphic->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
}
updatePreview = true;
}
if( evt->IsCancel() || evt->IsActivate() || evt->IsAction( &COMMON_ACTIONS::layerChanged ) )
{
preview.Clear();
updatePreview = true;
delete aGraphic;
aGraphic = NULL;
break;
}
else if( evt->IsClick( BUT_LEFT ) || evt->IsDblClick( BUT_LEFT ) )
{
if( !started )
{
LAYER_ID layer = m_frame->GetScreen()->m_Active_Layer;
if( IsCopperLayer( layer ) )
{
DisplayInfoMessage( NULL, _( "Graphic not allowed on Copper layers" ) );
}
else
{
// Init the new item attributes
aGraphic->SetShape( (STROKE_T) aShape );
m_lineWidth = getSegmentWidth( layer );
aGraphic->SetWidth( m_lineWidth );
aGraphic->SetStart( wxPoint( cursorPos.x, cursorPos.y ) );
aGraphic->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
aGraphic->SetLayer( layer );
if( aShape == S_SEGMENT )
line45 = *aGraphic; // used only for direction 45 mode with lines
preview.Add( aGraphic );
m_controls->SetAutoPan( true );
m_controls->CaptureCursor( true );
started = true;
}
}
else
{
if( aGraphic->GetEnd() == aGraphic->GetStart() ||
( evt->IsDblClick( BUT_LEFT ) && aShape == S_SEGMENT ) )
// User has clicked twice in the same spot
{ // a clear sign that the current drawing is finished
if( direction45 )
{
// Now we have to add the helper line as well
if( m_editModules )
{
EDGE_MODULE* l = new EDGE_MODULE( m_board->m_Modules );
// Copy coordinates, layer, etc.
*static_cast<DRAWSEGMENT*>( l ) = line45;
l->SetEnd( aGraphic->GetStart() );
l->SetLocalCoord();
m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
m_board->m_Modules->SetLastEditTime();
m_board->m_Modules->GraphicalItems().PushFront( l );
m_view->Add( l );
l->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else
{
DRAWSEGMENT* l = static_cast<DRAWSEGMENT*>( line45.Clone() );
l->SetEnd( aGraphic->GetStart() );
m_frame->SaveCopyInUndoList( l, UR_NEW );
m_board->Add( l );
m_view->Add( l );
l->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
m_frame->OnModify();
}
delete aGraphic;
aGraphic = NULL;
}
else
{
assert( aGraphic->GetLength() > 0 );
assert( aGraphic->GetWidth() > 0 );
m_view->Add( aGraphic );
aGraphic->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
preview.Clear();
break;
}
}
else if( evt->IsMotion() )
{
// 45 degree lines
if( direction45 && aShape == S_SEGMENT )
make45DegLine( aGraphic, &line45 );
else
aGraphic->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
updatePreview = true;
}
else if( evt->IsAction( &COMMON_ACTIONS::incWidth ) )
{
m_lineWidth += WIDTH_STEP;
aGraphic->SetWidth( m_lineWidth );
updatePreview = true;
}
else if( evt->IsAction( &COMMON_ACTIONS::decWidth ) )
{
if( m_lineWidth > (unsigned) WIDTH_STEP )
{
m_lineWidth -= WIDTH_STEP;
aGraphic->SetWidth( m_lineWidth );
updatePreview = true;
}
}
if( updatePreview )
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
m_controls->ShowCursor( false );
m_controls->SetSnapping( false );
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
m_view->Remove( &preview );
return started;
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataToWindow()
{
// Set unit symbol
wxStaticText* texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
};
for( size_t ii = 0; ii < DIM( texts_unit ); ii++ )
{
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch( m_item->GetShape() )
{
case S_CIRCLE:
SetTitle( _( "Circle Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Point X" ) );
m_EndPointYLabel->SetLabel( _( "Point Y" ) );
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
case S_ARC:
SetTitle( _( "Arc Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );
m_AngleValue = m_item->GetAngle() / 10.0;
break;
case S_SEGMENT:
SetTitle( _( "Line Segment Properties" ) );
// Fall through.
default:
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( LSET::InternalCuMask().set( Edge_Cuts ) );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item was on an unknown layer.\n"
"It has been moved to the front silk screen layer. Please fix it." ) );
m_LayerSelectionCtrl->SetLayerSelection( F_SilkS );
}
return DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataToWindow();
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::Validate()
{
wxArrayString error_msgs;
if( !DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::Validate() )
return false;
// Load the start and end points -- all types use these in the checks.
int startx = ValueFromString( g_UserUnit, m_Center_StartXCtrl->GetValue() );
int starty = ValueFromString( g_UserUnit, m_Center_StartYCtrl->GetValue() );
int endx = ValueFromString( g_UserUnit, m_EndX_Radius_Ctrl->GetValue() );
int endy = ValueFromString( g_UserUnit, m_EndY_Ctrl->GetValue() );
// Type specific checks.
switch( m_item->GetShape() )
{
case S_ARC:
// Check angle of arc.
double angle;
m_AngleCtrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360( angle );
if( angle == 0 )
{
error_msgs.Add( _( "The arc angle must be greater than zero." ) );
}
// Fall through.
case S_CIRCLE:
// Check radius.
if( (startx == endx) && (starty == endy) )
error_msgs.Add( _( "The radius must be greater than zero." ) );
break;
default:
// Check start and end are not the same.
if( (startx == endx) && (starty == endy) )
error_msgs.Add( _( "The start and end points cannot be the same." ) );
break;
}
// Check the item thickness.
int thickness = ValueFromString( g_UserUnit, m_ThicknessCtrl->GetValue() );
if( thickness <= 0 )
error_msgs.Add( _( "The item thickness must be greater than zero." ) );
// And the default thickness.
thickness = ValueFromString( g_UserUnit, m_DefaultThicknessCtrl->GetValue() );
if( thickness <= 0 )
error_msgs.Add( _( "The default thickness must be greater than zero." ) );
if( error_msgs.GetCount() )
{
HTML_MESSAGE_BOX dlg( this, _( "Error list" ) );
dlg.ListSet( error_msgs );
dlg.ShowModal();
}
return error_msgs.GetCount() == 0;
}
