// TODO: Implement support for edit packets that can span an MTU sized buffer. We need to implement a mechanism for the
// encodeEntityEditPacket() method to communicate the the caller which properties couldn't fit in the buffer. Similar
// to how we handle this in the Octree streaming case.
//
// TODO: Right now, all possible properties for all subclasses are handled here. Ideally we'd prefer
// to handle this in a more generic way. Allowing subclasses of EntityItem to register their properties
//
// TODO: There's a lot of repeated patterns in the code below to handle each property. It would be nice if the property
// registration mechanism allowed us to collapse these repeated sections of code into a single implementation that
// utilized the registration table to shorten up and simplify this code.
//
// TODO: Implement support for paged properties, spanning MTU, and custom properties
//
// TODO: Implement support for script and visible properties.
//
bool EntityItemProperties::encodeEntityEditPacket(PacketType command, EntityItemID id, const EntityItemProperties& properties,
unsigned char* bufferOut, int sizeIn, int& sizeOut) {
OctreePacketData ourDataPacket(false, sizeIn); // create a packetData object to add out packet details too.
OctreePacketData* packetData = &ourDataPacket; // we want a pointer to this so we can use our APPEND_ENTITY_PROPERTY macro
bool success = true; // assume the best
OctreeElement::AppendState appendState = OctreeElement::COMPLETED; // assume the best
sizeOut = 0;
// TODO: We need to review how jurisdictions should be handled for entities. (The old Models and Particles code
// didn't do anything special for jurisdictions, so we're keeping that same behavior here.)
//
// Always include the root octcode. This is only because the OctreeEditPacketSender will check these octcodes
// to determine which server to send the changes to in the case of multiple jurisdictions. The root will be sent
// to all servers.
glm::vec3 rootPosition(0);
float rootScale = 0.5f;
unsigned char* octcode = pointToOctalCode(rootPosition.x, rootPosition.y, rootPosition.z, rootScale);
success = packetData->startSubTree(octcode);
delete[] octcode;
// assuming we have rome to fit our octalCode, proceed...
if (success) {
// Now add our edit content details...
bool isNewEntityItem = (id.id == NEW_ENTITY);
// id
// encode our ID as a byte count coded byte stream
QByteArray encodedID = id.id.toRfc4122(); // NUM_BYTES_RFC4122_UUID
// encode our ID as a byte count coded byte stream
ByteCountCoded<quint32> tokenCoder;
QByteArray encodedToken;
// special case for handling "new" modelItems
if (isNewEntityItem) {
// encode our creator token as a byte count coded byte stream
tokenCoder = id.creatorTokenID;
encodedToken = tokenCoder;
}
// encode our type as a byte count coded byte stream
ByteCountCoded<quint32> typeCoder = (quint32)properties.getType();
QByteArray encodedType = typeCoder;
quint64 updateDelta = 0; // this is an edit so by definition, it's update is in sync
ByteCountCoded<quint64> updateDeltaCoder = updateDelta;
QByteArray encodedUpdateDelta = updateDeltaCoder;
EntityPropertyFlags propertyFlags(PROP_LAST_ITEM);
EntityPropertyFlags requestedProperties = properties.getChangedProperties();
EntityPropertyFlags propertiesDidntFit = requestedProperties;
// TODO: we need to handle the multi-pass form of this, similar to how we handle entity data
//
// If we are being called for a subsequent pass at appendEntityData() that failed to completely encode this item,
// then our modelTreeElementExtraEncodeData should include data about which properties we need to append.
//if (modelTreeElementExtraEncodeData && modelTreeElementExtraEncodeData->includedItems.contains(getEntityItemID())) {
// requestedProperties = modelTreeElementExtraEncodeData->includedItems.value(getEntityItemID());
//}
LevelDetails entityLevel = packetData->startLevel();
// Last Edited quint64 always first, before any other details, which allows us easy access to adjusting this
// timestamp for clock skew
quint64 lastEdited = properties.getLastEdited();
bool successLastEditedFits = packetData->appendValue(lastEdited);
bool successIDFits = packetData->appendValue(encodedID);
if (isNewEntityItem && successIDFits) {
successIDFits = packetData->appendValue(encodedToken);
}
bool successTypeFits = packetData->appendValue(encodedType);
// NOTE: We intentionally do not send "created" times in edit messages. This is because:
// 1) if the edit is to an existing entity, the created time can not be changed
// 2) if the edit is to a new entity, the created time is the last edited time
// TODO: Should we get rid of this in this in edit packets, since this has to always be 0?
bool successLastUpdatedFits = packetData->appendValue(encodedUpdateDelta);
int propertyFlagsOffset = packetData->getUncompressedByteOffset();
QByteArray encodedPropertyFlags = propertyFlags;
int oldPropertyFlagsLength = encodedPropertyFlags.length();
bool successPropertyFlagsFits = packetData->appendValue(encodedPropertyFlags);
int propertyCount = 0;
bool headerFits = successIDFits && successTypeFits && successLastEditedFits
&& successLastUpdatedFits && successPropertyFlagsFits;
int startOfEntityItemData = packetData->getUncompressedByteOffset();
if (headerFits) {
bool successPropertyFits;
propertyFlags -= PROP_LAST_ITEM; // clear the last item for now, we may or may not set it as the actual item
// These items would go here once supported....
// PROP_PAGED_PROPERTY,
// PROP_CUSTOM_PROPERTIES_INCLUDED,
APPEND_ENTITY_PROPERTY(PROP_POSITION, appendPosition, properties.getPosition());
APPEND_ENTITY_PROPERTY(PROP_DIMENSIONS, appendValue, properties.getDimensions()); // NOTE: PROP_RADIUS obsolete
APPEND_ENTITY_PROPERTY(PROP_ROTATION, appendValue, properties.getRotation());
APPEND_ENTITY_PROPERTY(PROP_MASS, appendValue, properties.getMass());
APPEND_ENTITY_PROPERTY(PROP_VELOCITY, appendValue, properties.getVelocity());
APPEND_ENTITY_PROPERTY(PROP_GRAVITY, appendValue, properties.getGravity());
APPEND_ENTITY_PROPERTY(PROP_DAMPING, appendValue, properties.getDamping());
APPEND_ENTITY_PROPERTY(PROP_LIFETIME, appendValue, properties.getLifetime());
APPEND_ENTITY_PROPERTY(PROP_SCRIPT, appendValue, properties.getScript());
APPEND_ENTITY_PROPERTY(PROP_COLOR, appendColor, properties.getColor());
APPEND_ENTITY_PROPERTY(PROP_MODEL_URL, appendValue, properties.getModelURL());
APPEND_ENTITY_PROPERTY(PROP_ANIMATION_URL, appendValue, properties.getAnimationURL());
APPEND_ENTITY_PROPERTY(PROP_ANIMATION_FPS, appendValue, properties.getAnimationFPS());
APPEND_ENTITY_PROPERTY(PROP_ANIMATION_FRAME_INDEX, appendValue, properties.getAnimationFrameIndex());
APPEND_ENTITY_PROPERTY(PROP_ANIMATION_PLAYING, appendValue, properties.getAnimationIsPlaying());
APPEND_ENTITY_PROPERTY(PROP_REGISTRATION_POINT, appendValue, properties.getRegistrationPoint());
APPEND_ENTITY_PROPERTY(PROP_ANGULAR_VELOCITY, appendValue, properties.getAngularVelocity());
APPEND_ENTITY_PROPERTY(PROP_ANGULAR_DAMPING, appendValue, properties.getAngularDamping());
APPEND_ENTITY_PROPERTY(PROP_VISIBLE, appendValue, properties.getVisible());
}
if (propertyCount > 0) {
int endOfEntityItemData = packetData->getUncompressedByteOffset();
encodedPropertyFlags = propertyFlags;
int newPropertyFlagsLength = encodedPropertyFlags.length();
packetData->updatePriorBytes(propertyFlagsOffset,
(const unsigned char*)encodedPropertyFlags.constData(), encodedPropertyFlags.length());
// if the size of the PropertyFlags shrunk, we need to shift everything down to front of packet.
if (newPropertyFlagsLength < oldPropertyFlagsLength) {
int oldSize = packetData->getUncompressedSize();
const unsigned char* modelItemData = packetData->getUncompressedData(propertyFlagsOffset + oldPropertyFlagsLength);
int modelItemDataLength = endOfEntityItemData - startOfEntityItemData;
int newEntityItemDataStart = propertyFlagsOffset + newPropertyFlagsLength;
packetData->updatePriorBytes(newEntityItemDataStart, modelItemData, modelItemDataLength);
int newSize = oldSize - (oldPropertyFlagsLength - newPropertyFlagsLength);
packetData->setUncompressedSize(newSize);
} else {
assert(newPropertyFlagsLength == oldPropertyFlagsLength); // should not have grown
}
packetData->endLevel(entityLevel);
} else {
packetData->discardLevel(entityLevel);
appendState = OctreeElement::NONE; // if we got here, then we didn't include the item
}
// If any part of the model items didn't fit, then the element is considered partial
if (appendState != OctreeElement::COMPLETED) {
// TODO: handle mechanism for handling partial fitting data!
// add this item into our list for the next appendElementData() pass
//modelTreeElementExtraEncodeData->includedItems.insert(getEntityItemID(), propertiesDidntFit);
// for now, if it's not complete, it's not successful
success = false;
}
}
if (success) {
packetData->endSubTree();
const unsigned char* finalizedData = packetData->getFinalizedData();
int finalizedSize = packetData->getFinalizedSize();
if (finalizedSize <= sizeIn) {
memcpy(bufferOut, finalizedData, finalizedSize);
sizeOut = finalizedSize;
} else {
qDebug() << "ERROR - encoded edit message doesn't fit in output buffer.";
sizeOut = 0;
success = false;
}
} else {
packetData->discardSubTree();
sizeOut = 0;
}
return success;
}
bool EntityEditFilters::filter(glm::vec3& position, EntityItemProperties& propertiesIn, EntityItemProperties& propertiesOut,
bool& wasChanged, EntityTree::FilterType filterType, EntityItemID& itemID, EntityItemPointer& existingEntity) {
// get the ids of all the zones (plus the global entity edit filter) that the position
// lies within
auto zoneIDs = getZonesByPosition(position);
for (auto id : zoneIDs) {
if (!itemID.isInvalidID() && id == itemID) {
continue;
}
// get the filter pair, etc...
_lock.lockForRead();
FilterData filterData = _filterDataMap.value(id);
_lock.unlock();
if (filterData.valid()) {
if (filterData.rejectAll) {
return false;
}
// check to see if this filter wants to filter this message type
if ((!filterData.wantsToFilterEdit && filterType == EntityTree::FilterType::Edit) ||
(!filterData.wantsToFilterPhysics && filterType == EntityTree::FilterType::Physics) ||
(!filterData.wantsToFilterDelete && filterType == EntityTree::FilterType::Delete) ||
(!filterData.wantsToFilterAdd && filterType == EntityTree::FilterType::Add)) {
wasChanged = false;
return true; // accept the message
}
auto oldProperties = propertiesIn.getDesiredProperties();
auto specifiedProperties = propertiesIn.getChangedProperties();
propertiesIn.setDesiredProperties(specifiedProperties);
QScriptValue inputValues = propertiesIn.copyToScriptValue(filterData.engine, false, true, true);
propertiesIn.setDesiredProperties(oldProperties);
auto in = QJsonValue::fromVariant(inputValues.toVariant()); // grab json copy now, because the inputValues might be side effected by the filter.
QScriptValueList args;
args << inputValues;
args << filterType;
// get the current properties for then entity and include them for the filter call
if (existingEntity && filterData.wantsOriginalProperties) {
auto currentProperties = existingEntity->getProperties(filterData.includedOriginalProperties);
QScriptValue currentValues = currentProperties.copyToScriptValue(filterData.engine, false, true, true);
args << currentValues;
}
// get the zone properties
if (filterData.wantsZoneProperties) {
auto zoneEntity = _tree->findEntityByEntityItemID(id);
if (zoneEntity) {
auto zoneProperties = zoneEntity->getProperties(filterData.includedZoneProperties);
QScriptValue zoneValues = zoneProperties.copyToScriptValue(filterData.engine, false, true, true);
if (filterData.wantsZoneBoundingBox) {
bool success = true;
AABox aaBox = zoneEntity->getAABox(success);
if (success) {
QScriptValue boundingBox = filterData.engine->newObject();
QScriptValue bottomRightNear = vec3ToScriptValue(filterData.engine, aaBox.getCorner());
QScriptValue topFarLeft = vec3ToScriptValue(filterData.engine, aaBox.calcTopFarLeft());
QScriptValue center = vec3ToScriptValue(filterData.engine, aaBox.calcCenter());
QScriptValue boundingBoxDimensions = vec3ToScriptValue(filterData.engine, aaBox.getDimensions());
boundingBox.setProperty("brn", bottomRightNear);
boundingBox.setProperty("tfl", topFarLeft);
boundingBox.setProperty("center", center);
boundingBox.setProperty("dimensions", boundingBoxDimensions);
zoneValues.setProperty("boundingBox", boundingBox);
}
}
// If this is an add or delete, or original properties weren't requested
// there won't be original properties in the args, but zone properties need
// to be the fourth parameter, so we need to pad the args accordingly
int EXPECTED_ARGS = 3;
if (args.length() < EXPECTED_ARGS) {
args << QScriptValue();
}
assert(args.length() == EXPECTED_ARGS); // we MUST have 3 args by now!
args << zoneValues;
}
}
QScriptValue result = filterData.filterFn.call(_nullObjectForFilter, args);
if (filterData.uncaughtExceptions()) {
return false;
}
if (result.isObject()) {
// make propertiesIn reflect the changes, for next filter...
propertiesIn.copyFromScriptValue(result, false);
// and update propertiesOut too. TODO: this could be more efficient...
propertiesOut.copyFromScriptValue(result, false);
// Javascript objects are == only if they are the same object. To compare arbitrary values, we need to use JSON.
auto out = QJsonValue::fromVariant(result.toVariant());
wasChanged |= (in != out);
} else if (result.isBool()) {
// if the filter returned false, then it's authoritative
if (!result.toBool()) {
return false;
}
// otherwise, assume it wants to pass all properties
propertiesOut = propertiesIn;
wasChanged = false;
} else {
return false;
}
}
}
// if we made it here,
return true;
}