void MeshRefinement::flag_elements_by_mean_stddev (const ErrorVector & error_per_cell,
const Real refine_frac,
const Real coarsen_frac,
const unsigned int max_l)
{
// The function arguments are currently just there for
// backwards_compatibility
if (!_use_member_parameters)
{
// If the user used non-default parameters, lets warn
// that they're deprecated
if (refine_frac != 0.3 ||
coarsen_frac != 0.0 ||
max_l != libMesh::invalid_uint)
libmesh_deprecated();
_refine_fraction = refine_frac;
_coarsen_fraction = coarsen_frac;
_max_h_level = max_l;
}
// Get the mean value from the error vector
const Real mean = error_per_cell.mean();
// Get the standard deviation. This equals the
// square-root of the variance
const Real stddev = std::sqrt (error_per_cell.variance());
// Check for valid fractions
libmesh_assert_greater_equal (_refine_fraction, 0);
libmesh_assert_less_equal (_refine_fraction, 1);
libmesh_assert_greater_equal (_coarsen_fraction, 0);
libmesh_assert_less_equal (_coarsen_fraction, 1);
// The refine and coarsen cutoff
const Real refine_cutoff = mean + _refine_fraction * stddev;
const Real coarsen_cutoff = std::max(mean - _coarsen_fraction * stddev, 0.);
// Loop over the elements and flag them for coarsening or
// refinement based on the element error
for (auto & elem : _mesh.active_element_ptr_range())
{
const dof_id_type id = elem->id();
libmesh_assert_less (id, error_per_cell.size());
const ErrorVectorReal elem_error = error_per_cell[id];
// Possibly flag the element for coarsening ...
if (elem_error <= coarsen_cutoff)
elem->set_refinement_flag(Elem::COARSEN);
// ... or refinement
if ((elem_error >= refine_cutoff) && (elem->level() < _max_h_level))
elem->set_refinement_flag(Elem::REFINE);
}
}
// The main program
int main(int argc, char** argv)
{
// Initialize libMesh
LibMeshInit init(argc, argv);
// Parameters
GetPot infile("fem_system_params.in");
const Real global_tolerance = infile("global_tolerance", 0.);
const unsigned int nelem_target = infile("n_elements", 400);
const bool transient = infile("transient", true);
const Real deltat = infile("deltat", 0.005);
unsigned int n_timesteps = infile("n_timesteps", 1);
//const unsigned int coarsegridsize = infile("coarsegridsize", 1);
const unsigned int coarserefinements = infile("coarserefinements", 0);
const unsigned int max_adaptivesteps = infile("max_adaptivesteps", 10);
//const unsigned int dim = 2;
#ifdef LIBMESH_HAVE_EXODUS_API
const unsigned int write_interval = infile("write_interval", 5);
#endif
// Create a mesh, with dimension to be overridden later, distributed
// across the default MPI communicator.
Mesh mesh(init.comm());
GetPot infileForMesh("convdiff_mprime.in");
std::string find_mesh_here = infileForMesh("mesh","psiLF_mesh.xda");
mesh.read(find_mesh_here);
std::cout << "Read in mesh from: " << find_mesh_here << "\n\n";
// And an object to refine it
MeshRefinement mesh_refinement(mesh);
mesh_refinement.coarsen_by_parents() = true;
mesh_refinement.absolute_global_tolerance() = global_tolerance;
mesh_refinement.nelem_target() = nelem_target;
mesh_refinement.refine_fraction() = 0.3;
mesh_refinement.coarsen_fraction() = 0.3;
mesh_refinement.coarsen_threshold() = 0.1;
//mesh_refinement.uniformly_refine(coarserefinements);
// Print information about the mesh to the screen.
mesh.print_info();
// Create an equation systems object.
EquationSystems equation_systems (mesh);
// Name system
ConvDiff_MprimeSys & system =
equation_systems.add_system<ConvDiff_MprimeSys>("Diff_ConvDiff_MprimeSys");
// Steady-state problem
system.time_solver =
AutoPtr<TimeSolver>(new SteadySolver(system));
// Sanity check that we are indeed solving a steady problem
libmesh_assert_equal_to (n_timesteps, 1);
// Read in all the equation systems data from the LF solve (system, solutions, rhs, etc)
std::string find_psiLF_here = infileForMesh("psiLF_file","psiLF.xda");
std::cout << "Looking for psiLF at: " << find_psiLF_here << "\n\n";
equation_systems.read(find_psiLF_here, READ,
EquationSystems::READ_HEADER |
EquationSystems::READ_DATA |
EquationSystems::READ_ADDITIONAL_DATA);
// Check that the norm of the solution read in is what we expect it to be
Real readin_L2 = system.calculate_norm(*system.solution, 0, L2);
std::cout << "Read in solution norm: "<< readin_L2 << std::endl << std::endl;
//DEBUG
//equation_systems.write("right_back_out.xda", WRITE, EquationSystems::WRITE_DATA |
// EquationSystems::WRITE_ADDITIONAL_DATA);
#ifdef LIBMESH_HAVE_GMV
//GMVIO(equation_systems.get_mesh()).write_equation_systems(std::string("right_back_out.gmv"), equation_systems);
#endif
// Initialize the system
//equation_systems.init (); //already initialized by read-in
// And the nonlinear solver options
NewtonSolver *solver = new NewtonSolver(system);
system.time_solver->diff_solver() = AutoPtr<DiffSolver>(solver);
solver->quiet = infile("solver_quiet", true);
solver->verbose = !solver->quiet;
solver->max_nonlinear_iterations =
infile("max_nonlinear_iterations", 15);
solver->relative_step_tolerance =
infile("relative_step_tolerance", 1.e-3);
solver->relative_residual_tolerance =
infile("relative_residual_tolerance", 0.0);
solver->absolute_residual_tolerance =
infile("absolute_residual_tolerance", 0.0);
// And the linear solver options
solver->max_linear_iterations =
infile("max_linear_iterations", 50000);
solver->initial_linear_tolerance =
infile("initial_linear_tolerance", 1.e-3);
// Print information about the system to the screen.
equation_systems.print_info();
// Now we begin the timestep loop to compute the time-accurate
// solution of the equations...not that this is transient, but eh, why not...
for (unsigned int t_step=0; t_step != n_timesteps; ++t_step)
{
// A pretty update message
std::cout << "\n\nSolving time step " << t_step << ", time = "
<< system.time << std::endl;
// Adaptively solve the timestep
unsigned int a_step = 0;
for (; a_step != max_adaptivesteps; ++a_step)
{ // VESTIGIAL for now ('vestigial' eh ? ;) )
std::cout << "\n\n I should be skipped what are you doing here lalalalalalala *!**!*!*!*!*!* \n\n";
system.solve();
system.postprocess();
ErrorVector error;
AutoPtr<ErrorEstimator> error_estimator;
// To solve to a tolerance in this problem we
// need a better estimator than Kelly
if (global_tolerance != 0.)
{
// We can't adapt to both a tolerance and a mesh
// size at once
libmesh_assert_equal_to (nelem_target, 0);
UniformRefinementEstimator *u =
new UniformRefinementEstimator;
// The lid-driven cavity problem isn't in H1, so
// lets estimate L2 error
u->error_norm = L2;
error_estimator.reset(u);
}
else
{
// If we aren't adapting to a tolerance we need a
// target mesh size
libmesh_assert_greater (nelem_target, 0);
// Kelly is a lousy estimator to use for a problem
// not in H1 - if we were doing more than a few
// timesteps we'd need to turn off or limit the
// maximum level of our adaptivity eventually
error_estimator.reset(new KellyErrorEstimator);
}
// Calculate error
std::vector<Real> weights(9,1.0); // based on u, v, p, c, their adjoints, and source parameter
// Keep the same default norm type.
std::vector<FEMNormType>
norms(1, error_estimator->error_norm.type(0));
error_estimator->error_norm = SystemNorm(norms, weights);
error_estimator->estimate_error(system, error);
// Print out status at each adaptive step.
Real global_error = error.l2_norm();
std::cout << "Adaptive step " << a_step << ": " << std::endl;
if (global_tolerance != 0.)
std::cout << "Global_error = " << global_error
<< std::endl;
if (global_tolerance != 0.)
std::cout << "Worst element error = " << error.maximum()
<< ", mean = " << error.mean() << std::endl;
if (global_tolerance != 0.)
{
// If we've reached our desired tolerance, we
// don't need any more adaptive steps
if (global_error < global_tolerance)
break;
mesh_refinement.flag_elements_by_error_tolerance(error);
}
else
{
// If flag_elements_by_nelem_target returns true, this
// should be our last adaptive step.
if (mesh_refinement.flag_elements_by_nelem_target(error))
{
mesh_refinement.refine_and_coarsen_elements();
equation_systems.reinit();
a_step = max_adaptivesteps;
break;
}
}
// Carry out the adaptive mesh refinement/coarsening
mesh_refinement.refine_and_coarsen_elements();
equation_systems.reinit();
std::cout << "Refined mesh to "
<< mesh.n_active_elem()
<< " active elements and "
<< equation_systems.n_active_dofs()
<< " active dofs." << std::endl;
} // End loop over adaptive steps
// Do one last solve if necessary
if (a_step == max_adaptivesteps)
{
QoISet qois;
std::vector<unsigned int> qoi_indices;
qoi_indices.push_back(0);
qois.add_indices(qoi_indices);
qois.set_weight(0, 1.0);
system.assemble_qoi_sides = true; //QoI doesn't involve sides
std::cout << "\n~*~*~*~*~*~*~*~*~ adjoint solve start ~*~*~*~*~*~*~*~*~\n" << std::endl;
std::pair<unsigned int, Real> adjsolve = system.adjoint_solve();
std::cout << "number of iterations to solve adjoint: " << adjsolve.first << std::endl;
std::cout << "final residual of adjoint solve: " << adjsolve.second << std::endl;
std::cout << "\n~*~*~*~*~*~*~*~*~ adjoint solve end ~*~*~*~*~*~*~*~*~" << std::endl;
NumericVector<Number> &dual_solution = system.get_adjoint_solution(0);
NumericVector<Number> &primal_solution = *system.solution;
primal_solution.swap(dual_solution);
ExodusII_IO(mesh).write_timestep("super_adjoint.exo",
equation_systems,
1, /* This number indicates how many time steps
are being written to the file */
system.time);
primal_solution.swap(dual_solution);
system.assemble(); //overwrite residual read in from psiLF solve
// The total error estimate
system.postprocess(); //to compute M_HF(psiLF) and M_LF(psiLF) terms
Real QoI_error_estimate = (-0.5*(system.rhs)->dot(dual_solution)) + system.get_MHF_psiLF() - system.get_MLF_psiLF();
std::cout << "\n\n 0.5*M'_HF(psiLF)(superadj): " << std::setprecision(17) << 0.5*(system.rhs)->dot(dual_solution) << "\n";
std::cout << " M_HF(psiLF): " << std::setprecision(17) << system.get_MHF_psiLF() << "\n";
std::cout << " M_LF(psiLF): " << std::setprecision(17) << system.get_MLF_psiLF() << "\n";
std::cout << "\n\n Residual L2 norm: " << system.calculate_norm(*system.rhs, L2) << "\n";
std::cout << " Residual discrete L2 norm: " << system.calculate_norm(*system.rhs, DISCRETE_L2) << "\n";
std::cout << " Super-adjoint L2 norm: " << system.calculate_norm(dual_solution, L2) << "\n";
std::cout << " Super-adjoint discrete L2 norm: " << system.calculate_norm(dual_solution, DISCRETE_L2) << "\n";
std::cout << "\n\n QoI error estimate: " << std::setprecision(17) << QoI_error_estimate << "\n\n";
//DEBUG
std::cout << "\n------------ herp derp ------------" << std::endl;
//libMesh::out.precision(16);
//dual_solution.print();
//system.get_adjoint_rhs().print();
AutoPtr<NumericVector<Number> > adjresid = system.solution->clone();
(system.matrix)->vector_mult(*adjresid,system.get_adjoint_solution(0));
SparseMatrix<Number>& adjmat = *system.matrix;
(system.matrix)->get_transpose(adjmat);
adjmat.vector_mult(*adjresid,system.get_adjoint_solution(0));
//std::cout << "******************** matrix-superadj product (libmesh) ************************" << std::endl;
//adjresid->print();
adjresid->add(-1.0, system.get_adjoint_rhs(0));
//std::cout << "******************** superadjoint system residual (libmesh) ***********************" << std::endl;
//adjresid->print();
std::cout << "\n\nadjoint system residual (discrete L2): " << system.calculate_norm(*adjresid,DISCRETE_L2) << std::endl;
std::cout << "adjoint system residual (L2, all): " << system.calculate_norm(*adjresid,L2) << std::endl;
std::cout << "adjoint system residual (L2, 0): " << system.calculate_norm(*adjresid,0,L2) << std::endl;
std::cout << "adjoint system residual (L2, 1): " << system.calculate_norm(*adjresid,1,L2) << std::endl;
std::cout << "adjoint system residual (L2, 2): " << system.calculate_norm(*adjresid,2,L2) << std::endl;
std::cout << "adjoint system residual (L2, 3): " << system.calculate_norm(*adjresid,3,L2) << std::endl;
std::cout << "adjoint system residual (L2, 4): " << system.calculate_norm(*adjresid,4,L2) << std::endl;
std::cout << "adjoint system residual (L2, 5): " << system.calculate_norm(*adjresid,5,L2) << std::endl;
/*
AutoPtr<NumericVector<Number> > sadj_matlab = system.solution->clone();
AutoPtr<NumericVector<Number> > adjresid_matlab = system.solution->clone();
if(FILE *fp=fopen("superadj_matlab.txt","r")){
Real value;
int counter = 0;
int flag = 1;
while(flag != -1){
flag = fscanf(fp,"%lf",&value);
if(flag != -1){
sadj_matlab->set(counter, value);
counter += 1;
}
}
fclose(fp);
}
(system.matrix)->vector_mult(*adjresid_matlab,*sadj_matlab);
//std::cout << "******************** matrix-superadj product (matlab) ***********************" << std::endl;
//adjresid_matlab->print();
adjresid_matlab->add(-1.0, system.get_adjoint_rhs(0));
//std::cout << "******************** superadjoint system residual (matlab) ***********************" << std::endl;
//adjresid_matlab->print();
std::cout << "\n\nmatlab import adjoint system residual (discrete L2): " << system.calculate_norm(*adjresid_matlab,DISCRETE_L2) << "\n" << std::endl;
*/
/*
AutoPtr<NumericVector<Number> > sadj_fwd_hack = system.solution->clone();
AutoPtr<NumericVector<Number> > adjresid_fwd_hack = system.solution->clone();
if(FILE *fp=fopen("superadj_forward_hack.txt","r")){
Real value;
int counter = 0;
int flag = 1;
while(flag != -1){
flag = fscanf(fp,"%lf",&value);
if(flag != -1){
sadj_fwd_hack->set(counter, value);
counter += 1;
}
}
fclose(fp);
}
(system.matrix)->vector_mult(*adjresid_fwd_hack,*sadj_fwd_hack);
//std::cout << "******************** matrix-superadj product (fwd_hack) ***********************" << std::endl;
//adjresid_fwd_hack->print();
adjresid_fwd_hack->add(-1.0, system.get_adjoint_rhs(0));
//std::cout << "******************** superadjoint system residual (fwd_hack) ***********************" << std::endl;
//adjresid_fwd_hack->print();
std::cout << "\n\nfwd_hack import adjoint system residual (discrete L2): " << system.calculate_norm(*adjresid_fwd_hack,DISCRETE_L2) << "\n" << std::endl;
std::cout << "fwd_hack adjoint system residual (L2, 0): " << system.calculate_norm(*adjresid_fwd_hack,0,L2) << std::endl;
std::cout << "fwd_hack adjoint system residual (L2, 1): " << system.calculate_norm(*adjresid_fwd_hack,1,L2) << std::endl;
std::cout << "fwd_hack adjoint system residual (L2, 2): " << system.calculate_norm(*adjresid_fwd_hack,2,L2) << std::endl;
std::cout << "fwd_hack adjoint system residual (L2, 3): " << system.calculate_norm(*adjresid_fwd_hack,3,L2) << std::endl;
std::cout << "fwd_hack adjoint system residual (L2, 4): " << system.calculate_norm(*adjresid_fwd_hack,4,L2) << std::endl;
std::cout << "fwd_hack adjoint system residual (L2, 5): " << system.calculate_norm(*adjresid_fwd_hack,5,L2) << std::endl;
*/
//std::cout << "************************ system.matrix ***********************" << std::endl;
//system.matrix->print();
std::cout << "\n------------ herp derp ------------" << std::endl;
// The cell wise breakdown
ErrorVector cell_wise_error;
cell_wise_error.resize((system.rhs)->size());
for(unsigned int i = 0; i < (system.rhs)->size() ; i++)
{
if(i < system.get_mesh().n_elem())
cell_wise_error[i] = fabs(-0.5*((system.rhs)->el(i) * dual_solution(i))
+ system.get_MHF_psiLF(i) - system.get_MLF_psiLF(i));
else
cell_wise_error[i] = fabs(-0.5*((system.rhs)->el(i) * dual_solution(i)));
/*csv from 'save data' from gmv output gives a few values at each node point (value
for every element that shares that node), yet paraview display only seems to show one
of them -> the value in an element is given at each of the nodes that it has, hence the
repetition; what is displayed in paraview is each element's value; even though MHF_psiLF
and MLF_psiLF are stored by element this seems to give elemental contributions that
agree with if we had taken the superadj-residual dot product by integrating over elements*/
/*at higher mesh resolutions and lower k, weird-looking artifacts start to appear and
it no longer agrees with output from manual integration of superadj-residual...*/
}
// Plot it
std::ostringstream error_gmv;
error_gmv << "error.gmv";
cell_wise_error.plot_error(error_gmv.str(), equation_systems.get_mesh());
//alternate element-wise breakdown, outputed as values matched to element centroids; for matlab plotz
primal_solution.swap(dual_solution);
system.postprocess(1);
primal_solution.swap(dual_solution);
system.postprocess(2);
std::cout << "\n\n -0.5*M'_HF(psiLF)(superadj): " << std::setprecision(17) << system.get_half_adj_weighted_resid() << "\n";
primal_solution.swap(dual_solution);
std::string write_error_here = infileForMesh("error_est_output_file", "error_est_breakdown.dat");
std::ofstream output(write_error_here);
for(unsigned int i = 0 ; i < system.get_mesh().n_elem(); i++) {
Point elem_cent = system.get_mesh().elem(i)->centroid();
if(output.is_open()) {
output << elem_cent(0) << " " << elem_cent(1) << " "
<< fabs(system.get_half_adj_weighted_resid(i) + system.get_MHF_psiLF(i) - system.get_MLF_psiLF(i)) << "\n";
}
}
output.close();
} // End if at max adaptive steps
#ifdef LIBMESH_HAVE_EXODUS_API
// Write out this timestep if we're requested to
if ((t_step+1)%write_interval == 0)
{
std::ostringstream file_name;
/*
// We write the file in the ExodusII format.
file_name << "out_"
<< std::setw(3)
<< std::setfill('0')
<< std::right
<< t_step+1
<< ".e";
//this should write out the primal which should be the same as what's read in...
ExodusII_IO(mesh).write_timestep(file_name.str(),
equation_systems,
1, //number of time steps written to file
system.time);
*/
}
#endif // #ifdef LIBMESH_HAVE_EXODUS_API
}
// All done.
return 0;
} //end main
int main(int argc, char** argv)
{
// Initialize libMesh.
LibMeshInit init (argc, argv);
// Adaptive constraint calculations for fine Hermite elements seems
// to require half-decent precision
#ifdef LIBMESH_DEFAULT_SINGLE_PRECISION
libmesh_example_assert(false, "double precision");
#endif
// This example requires Adaptive Mesh Refinement support
#ifndef LIBMESH_ENABLE_AMR
libmesh_example_assert(false, "--enable-amr");
#else
// This example requires second derivative calculation support
#ifndef LIBMESH_ENABLE_SECOND_DERIVATIVES
libmesh_example_assert(false, "--enable-second");
#else
// Parse the input file
GetPot input_file("adaptivity_ex4.in");
// Read in parameters from the input file
const unsigned int max_r_level = input_file("max_r_level", 10);
const unsigned int max_r_steps = input_file("max_r_steps", 4);
const std::string approx_type = input_file("approx_type",
"HERMITE");
const unsigned int uniform_refine =
input_file("uniform_refine", 0);
const Real refine_percentage =
input_file("refine_percentage", 0.5);
const Real coarsen_percentage =
input_file("coarsen_percentage", 0.5);
const unsigned int dim =
input_file("dimension", 2);
const unsigned int max_linear_iterations =
input_file("max_linear_iterations", 10000);
// Skip higher-dimensional examples on a lower-dimensional libMesh build
libmesh_example_assert(dim <= LIBMESH_DIM, "2D/3D support");
// We have only defined 2 and 3 dimensional problems
libmesh_assert (dim == 2 || dim == 3);
// Currently only the Hermite cubics give a 3D C^1 basis
libmesh_assert (dim == 2 || approx_type == "HERMITE");
// Create a mesh.
Mesh mesh;
// Output file for plotting the error
std::string output_file = "";
if (dim == 2)
output_file += "2D_";
else if (dim == 3)
output_file += "3D_";
if (approx_type == "HERMITE")
output_file += "hermite_";
else if (approx_type == "SECOND")
output_file += "reducedclough_";
else
output_file += "clough_";
if (uniform_refine == 0)
output_file += "adaptive";
else
output_file += "uniform";
std::string exd_file = output_file;
exd_file += ".e";
output_file += ".m";
std::ofstream out (output_file.c_str());
out << "% dofs L2-error H1-error H2-error\n"
<< "e = [\n";
// Set up the dimension-dependent coarse mesh and solution
// We build more than one cell so as to avoid bugs on fewer than
// 4 processors in 2D or 8 in 3D.
if (dim == 2)
{
MeshTools::Generation::build_square(mesh, 2, 2);
exact_solution = &exact_2D_solution;
exact_derivative = &exact_2D_derivative;
exact_hessian = &exact_2D_hessian;
forcing_function = &forcing_function_2D;
}
else if (dim == 3)
{
MeshTools::Generation::build_cube(mesh, 2, 2, 2);
exact_solution = &exact_3D_solution;
exact_derivative = &exact_3D_derivative;
exact_hessian = &exact_3D_hessian;
forcing_function = &forcing_function_3D;
}
// Convert the mesh to second order: necessary for computing with
// Clough-Tocher elements, useful for getting slightly less
// broken visualization output with Hermite elements
mesh.all_second_order();
// Convert it to triangles if necessary
if (approx_type != "HERMITE")
MeshTools::Modification::all_tri(mesh);
// Mesh Refinement object
MeshRefinement mesh_refinement(mesh);
mesh_refinement.refine_fraction() = refine_percentage;
mesh_refinement.coarsen_fraction() = coarsen_percentage;
mesh_refinement.max_h_level() = max_r_level;
// Create an equation systems object.
EquationSystems equation_systems (mesh);
// Declare the system and its variables.
// Create a system named "Biharmonic"
LinearImplicitSystem& system =
equation_systems.add_system<LinearImplicitSystem> ("Biharmonic");
// Adds the variable "u" to "Biharmonic". "u"
// will be approximated using Hermite tensor product squares
// or (possibly reduced) cubic Clough-Tocher triangles
if (approx_type == "HERMITE")
system.add_variable("u", THIRD, HERMITE);
else if (approx_type == "SECOND")
system.add_variable("u", SECOND, CLOUGH);
else if (approx_type == "CLOUGH")
system.add_variable("u", THIRD, CLOUGH);
else
libmesh_error();
// Give the system a pointer to the matrix assembly
// function.
system.attach_assemble_function (assemble_biharmonic);
// Initialize the data structures for the equation system.
equation_systems.init();
// Set linear solver max iterations
equation_systems.parameters.set<unsigned int>
("linear solver maximum iterations") = max_linear_iterations;
// Linear solver tolerance.
equation_systems.parameters.set<Real>
("linear solver tolerance") = TOLERANCE * TOLERANCE;
// Prints information about the system to the screen.
equation_systems.print_info();
// Construct ExactSolution object and attach function to compute exact solution
ExactSolution exact_sol(equation_systems);
exact_sol.attach_exact_value(exact_solution);
exact_sol.attach_exact_deriv(exact_derivative);
exact_sol.attach_exact_hessian(exact_hessian);
// Construct zero solution object, useful for computing solution norms
// Attaching "zero_solution" functions is unnecessary
ExactSolution zero_sol(equation_systems);
// A refinement loop.
for (unsigned int r_step=0; r_step<max_r_steps; r_step++)
{
mesh.print_info();
equation_systems.print_info();
std::cout << "Beginning Solve " << r_step << std::endl;
// Solve the system "Biharmonic", just like example 2.
system.solve();
std::cout << "Linear solver converged at step: "
<< system.n_linear_iterations()
<< ", final residual: "
<< system.final_linear_residual()
<< std::endl;
// Compute the error.
exact_sol.compute_error("Biharmonic", "u");
// Compute the norm.
zero_sol.compute_error("Biharmonic", "u");
// Print out the error values
std::cout << "L2-Norm is: "
<< zero_sol.l2_error("Biharmonic", "u")
<< std::endl;
std::cout << "H1-Norm is: "
<< zero_sol.h1_error("Biharmonic", "u")
<< std::endl;
std::cout << "H2-Norm is: "
<< zero_sol.h2_error("Biharmonic", "u")
<< std::endl
<< std::endl;
std::cout << "L2-Error is: "
<< exact_sol.l2_error("Biharmonic", "u")
<< std::endl;
std::cout << "H1-Error is: "
<< exact_sol.h1_error("Biharmonic", "u")
<< std::endl;
std::cout << "H2-Error is: "
<< exact_sol.h2_error("Biharmonic", "u")
<< std::endl
<< std::endl;
// Print to output file
out << equation_systems.n_active_dofs() << " "
<< exact_sol.l2_error("Biharmonic", "u") << " "
<< exact_sol.h1_error("Biharmonic", "u") << " "
<< exact_sol.h2_error("Biharmonic", "u") << std::endl;
// Possibly refine the mesh
if (r_step+1 != max_r_steps)
{
std::cout << " Refining the mesh..." << std::endl;
if (uniform_refine == 0)
{
ErrorVector error;
LaplacianErrorEstimator error_estimator;
error_estimator.estimate_error(system, error);
mesh_refinement.flag_elements_by_elem_fraction (error);
std::cout << "Mean Error: " << error.mean() <<
std::endl;
std::cout << "Error Variance: " << error.variance() <<
std::endl;
mesh_refinement.refine_and_coarsen_elements();
}
else
{
mesh_refinement.uniformly_refine(1);
}
// This call reinitializes the \p EquationSystems object for
// the newly refined mesh. One of the steps in the
// reinitialization is projecting the \p solution,
// \p old_solution, etc... vectors from the old mesh to
// the current one.
equation_systems.reinit ();
}
}
#ifdef LIBMESH_HAVE_EXODUS_API
// Write out the solution
// After solving the system write the solution
// to a ExodusII-formatted plot file.
ExodusII_IO (mesh).write_equation_systems (exd_file,
equation_systems);
#endif // #ifdef LIBMESH_HAVE_EXODUS_API
// Close up the output file.
out << "];\n"
<< "hold on\n"
<< "loglog(e(:,1), e(:,2), 'bo-');\n"
<< "loglog(e(:,1), e(:,3), 'ro-');\n"
<< "loglog(e(:,1), e(:,4), 'go-');\n"
<< "xlabel('log(dofs)');\n"
<< "ylabel('log(error)');\n"
<< "title('C1 " << approx_type << " elements');\n"
<< "legend('L2-error', 'H1-error', 'H2-error');\n";
// All done.
return 0;
#endif // #ifndef LIBMESH_ENABLE_SECOND_DERIVATIVES
#endif // #ifndef LIBMESH_ENABLE_AMR
}
// The main program.
int main (int argc, char** argv)
{
// Initialize libMesh.
LibMeshInit init (argc, argv);
// This example fails without at least double precision FP
#ifdef LIBMESH_DEFAULT_SINGLE_PRECISION
libmesh_example_assert(false, "--disable-singleprecision");
#endif
#ifndef LIBMESH_ENABLE_AMR
libmesh_example_assert(false, "--enable-amr");
#else
// Trilinos solver NaNs by default on the zero pressure block.
// We'll skip this example for now.
if (libMesh::default_solver_package() == TRILINOS_SOLVERS)
{
std::cout << "We skip fem_system_ex1 when using the Trilinos solvers.\n"
<< std::endl;
return 0;
}
// Parse the input file
GetPot infile("fem_system_ex1.in");
// Read in parameters from the input file
const Real global_tolerance = infile("global_tolerance", 0.);
const unsigned int nelem_target = infile("n_elements", 400);
const bool transient = infile("transient", true);
const Real deltat = infile("deltat", 0.005);
unsigned int n_timesteps = infile("n_timesteps", 20);
const unsigned int write_interval = infile("write_interval", 5);
const unsigned int coarsegridsize = infile("coarsegridsize", 1);
const unsigned int coarserefinements = infile("coarserefinements", 0);
const unsigned int max_adaptivesteps = infile("max_adaptivesteps", 10);
const unsigned int dim = infile("dimension", 2);
// Skip higher-dimensional examples on a lower-dimensional libMesh build
libmesh_example_assert(dim <= LIBMESH_DIM, "2D/3D support");
// We have only defined 2 and 3 dimensional problems
libmesh_assert (dim == 2 || dim == 3);
// Create a mesh.
Mesh mesh;
// And an object to refine it
MeshRefinement mesh_refinement(mesh);
mesh_refinement.coarsen_by_parents() = true;
mesh_refinement.absolute_global_tolerance() = global_tolerance;
mesh_refinement.nelem_target() = nelem_target;
mesh_refinement.refine_fraction() = 0.3;
mesh_refinement.coarsen_fraction() = 0.3;
mesh_refinement.coarsen_threshold() = 0.1;
// Use the MeshTools::Generation mesh generator to create a uniform
// grid on the square [-1,1]^D. We instruct the mesh generator
// to build a mesh of 8x8 \p Quad9 elements in 2D, or \p Hex27
// elements in 3D. Building these higher-order elements allows
// us to use higher-order approximation, as in example 3.
if (dim == 2)
MeshTools::Generation::build_square (mesh,
coarsegridsize,
coarsegridsize,
0., 1.,
0., 1.,
QUAD9);
else if (dim == 3)
MeshTools::Generation::build_cube (mesh,
coarsegridsize,
coarsegridsize,
coarsegridsize,
0., 1.,
0., 1.,
0., 1.,
HEX27);
mesh_refinement.uniformly_refine(coarserefinements);
// Print information about the mesh to the screen.
mesh.print_info();
// Create an equation systems object.
EquationSystems equation_systems (mesh);
// Declare the system "Navier-Stokes" and its variables.
NavierSystem & system =
equation_systems.add_system<NavierSystem> ("Navier-Stokes");
// Solve this as a time-dependent or steady system
if (transient)
system.time_solver =
AutoPtr<TimeSolver>(new EulerSolver(system));
else
{
system.time_solver =
AutoPtr<TimeSolver>(new SteadySolver(system));
libmesh_assert_equal_to (n_timesteps, 1);
}
// Initialize the system
equation_systems.init ();
// Set the time stepping options
system.deltat = deltat;
// And the nonlinear solver options
DiffSolver &solver = *(system.time_solver->diff_solver().get());
solver.quiet = infile("solver_quiet", true);
solver.verbose = !solver.quiet;
solver.max_nonlinear_iterations =
infile("max_nonlinear_iterations", 15);
solver.relative_step_tolerance =
infile("relative_step_tolerance", 1.e-3);
solver.relative_residual_tolerance =
infile("relative_residual_tolerance", 0.0);
solver.absolute_residual_tolerance =
infile("absolute_residual_tolerance", 0.0);
// And the linear solver options
solver.max_linear_iterations =
infile("max_linear_iterations", 50000);
solver.initial_linear_tolerance =
infile("initial_linear_tolerance", 1.e-3);
// Print information about the system to the screen.
equation_systems.print_info();
// Now we begin the timestep loop to compute the time-accurate
// solution of the equations.
for (unsigned int t_step=0; t_step != n_timesteps; ++t_step)
{
// A pretty update message
std::cout << "\n\nSolving time step " << t_step << ", time = "
<< system.time << std::endl;
// Adaptively solve the timestep
unsigned int a_step = 0;
for (; a_step != max_adaptivesteps; ++a_step)
{
system.solve();
system.postprocess();
ErrorVector error;
AutoPtr<ErrorEstimator> error_estimator;
// To solve to a tolerance in this problem we
// need a better estimator than Kelly
if (global_tolerance != 0.)
{
// We can't adapt to both a tolerance and a mesh
// size at once
libmesh_assert_equal_to (nelem_target, 0);
UniformRefinementEstimator *u =
new UniformRefinementEstimator;
// The lid-driven cavity problem isn't in H1, so
// lets estimate L2 error
u->error_norm = L2;
error_estimator.reset(u);
}
else
{
// If we aren't adapting to a tolerance we need a
// target mesh size
libmesh_assert_greater (nelem_target, 0);
// Kelly is a lousy estimator to use for a problem
// not in H1 - if we were doing more than a few
// timesteps we'd need to turn off or limit the
// maximum level of our adaptivity eventually
error_estimator.reset(new KellyErrorEstimator);
}
// Calculate error based on u and v (and w?) but not p
std::vector<Real> weights(2,1.0); // u, v
if (dim == 3)
weights.push_back(1.0); // w
weights.push_back(0.0); // p
// Keep the same default norm type.
std::vector<FEMNormType>
norms(1, error_estimator->error_norm.type(0));
error_estimator->error_norm = SystemNorm(norms, weights);
error_estimator->estimate_error(system, error);
// Print out status at each adaptive step.
Real global_error = error.l2_norm();
std::cout << "Adaptive step " << a_step << ": " << std::endl;
if (global_tolerance != 0.)
std::cout << "Global_error = " << global_error
<< std::endl;
if (global_tolerance != 0.)
std::cout << "Worst element error = " << error.maximum()
<< ", mean = " << error.mean() << std::endl;
if (global_tolerance != 0.)
{
// If we've reached our desired tolerance, we
// don't need any more adaptive steps
if (global_error < global_tolerance)
break;
mesh_refinement.flag_elements_by_error_tolerance(error);
}
else
{
// If flag_elements_by_nelem_target returns true, this
// should be our last adaptive step.
if (mesh_refinement.flag_elements_by_nelem_target(error))
{
mesh_refinement.refine_and_coarsen_elements();
equation_systems.reinit();
a_step = max_adaptivesteps;
break;
}
}
// Carry out the adaptive mesh refinement/coarsening
mesh_refinement.refine_and_coarsen_elements();
equation_systems.reinit();
std::cout << "Refined mesh to "
<< mesh.n_active_elem()
<< " active elements and "
<< equation_systems.n_active_dofs()
<< " active dofs." << std::endl;
}
// Do one last solve if necessary
if (a_step == max_adaptivesteps)
{
system.solve();
system.postprocess();
}
// Advance to the next timestep in a transient problem
system.time_solver->advance_timestep();
#ifdef LIBMESH_HAVE_EXODUS_API
// Write out this timestep if we're requested to
if ((t_step+1)%write_interval == 0)
{
std::ostringstream file_name;
// We write the file in the ExodusII format.
file_name << "out_"
<< std::setw(3)
<< std::setfill('0')
<< std::right
<< t_step+1
<< ".e";
ExodusII_IO(mesh).write_timestep(file_name.str(),
equation_systems,
1, /* This number indicates how many time steps
are being written to the file */
system.time);
}
#endif // #ifdef LIBMESH_HAVE_EXODUS_API
}
#endif // #ifndef LIBMESH_ENABLE_AMR
// All done.
return 0;
}
// The main program.
int main (int argc, char ** argv)
{
// Initialize libMesh.
LibMeshInit init (argc, argv);
// This example requires a linear solver package.
libmesh_example_requires(libMesh::default_solver_package() != INVALID_SOLVER_PACKAGE,
"--enable-petsc, --enable-trilinos, or --enable-eigen");
#ifndef LIBMESH_ENABLE_AMR
libmesh_example_requires(false, "--enable-amr");
#else
// This doesn't converge with Eigen BICGSTAB for some reason...
libmesh_example_requires(libMesh::default_solver_package() != EIGEN_SOLVERS, "--enable-petsc");
// This doesn't converge without at least double precision
libmesh_example_requires(sizeof(Real) > 4, "--disable-singleprecision");
// Parse the input file
GetPot infile("fem_system_ex4.in");
// Read in parameters from the input file
const Real global_tolerance = infile("global_tolerance", 0.);
const unsigned int nelem_target = infile("n_elements", 400);
const Real deltat = infile("deltat", 0.005);
const unsigned int coarsegridsize = infile("coarsegridsize", 20);
const unsigned int coarserefinements = infile("coarserefinements", 0);
const unsigned int max_adaptivesteps = infile("max_adaptivesteps", 10);
const unsigned int dim = infile("dimension", 2);
// Skip higher-dimensional examples on a lower-dimensional libMesh build
libmesh_example_requires(dim <= LIBMESH_DIM, "2D/3D support");
// We have only defined 2 and 3 dimensional problems
libmesh_assert (dim == 2 || dim == 3);
// Create a mesh, with dimension to be overridden later, distributed
// across the default MPI communicator.
Mesh mesh(init.comm());
// And an object to refine it
MeshRefinement mesh_refinement(mesh);
mesh_refinement.coarsen_by_parents() = true;
mesh_refinement.absolute_global_tolerance() = global_tolerance;
mesh_refinement.nelem_target() = nelem_target;
mesh_refinement.refine_fraction() = 0.3;
mesh_refinement.coarsen_fraction() = 0.3;
mesh_refinement.coarsen_threshold() = 0.1;
// Use the MeshTools::Generation mesh generator to create a uniform
// grid on the square or cube. We crop the domain at y=2/3 to allow
// for a homogeneous Neumann BC in our benchmark there.
boundary_id_type bcid = 3; // +y in 3D
if (dim == 2)
{
MeshTools::Generation::build_square
(mesh,
coarsegridsize,
coarsegridsize*2/3, // int arithmetic best we can do here
0., 1.,
0., 2./3.,
QUAD9);
bcid = 2; // +y in 2D
}
else if (dim == 3)
{
MeshTools::Generation::build_cube
(mesh,
coarsegridsize,
coarsegridsize*2/3,
coarsegridsize,
0., 1.,
0., 2./3.,
0., 1.,
HEX27);
}
{
// Add boundary elements corresponding to the +y boundary of our
// volume mesh
std::set<boundary_id_type> bcids;
bcids.insert(bcid);
mesh.get_boundary_info().add_elements(bcids, mesh);
mesh.prepare_for_use();
}
// To work around ExodusII file format limitations, we need elements
// of different dimensionality to belong to different subdomains.
// Our interior elements defaulted to subdomain id 0, so we'll set
// boundary elements to subdomain 1.
for (auto & elem : mesh.element_ptr_range())
if (elem->dim() < dim)
elem->subdomain_id() = 1;
mesh_refinement.uniformly_refine(coarserefinements);
// Print information about the mesh to the screen.
mesh.print_info();
// Create an equation systems object.
EquationSystems equation_systems (mesh);
// Declare the system "Heat" and its variables.
HeatSystem & system =
equation_systems.add_system<HeatSystem> ("Heat");
// Solve this as a steady system
system.time_solver = libmesh_make_unique<SteadySolver>(system);
// Initialize the system
equation_systems.init ();
// Set the time stepping options
system.deltat = deltat;
// And the nonlinear solver options
DiffSolver & solver = *(system.time_solver->diff_solver().get());
solver.quiet = infile("solver_quiet", true);
solver.verbose = !solver.quiet;
solver.max_nonlinear_iterations = infile("max_nonlinear_iterations", 15);
solver.relative_step_tolerance = infile("relative_step_tolerance", 1.e-3);
solver.relative_residual_tolerance = infile("relative_residual_tolerance", 0.0);
solver.absolute_residual_tolerance = infile("absolute_residual_tolerance", 0.0);
// And the linear solver options
solver.max_linear_iterations = infile("max_linear_iterations", 50000);
solver.initial_linear_tolerance = infile("initial_linear_tolerance", 1.e-3);
// Print information about the system to the screen.
equation_systems.print_info();
// Adaptively solve the steady solution
unsigned int a_step = 0;
for (; a_step != max_adaptivesteps; ++a_step)
{
system.solve();
system.postprocess();
ErrorVector error;
std::unique_ptr<ErrorEstimator> error_estimator;
// To solve to a tolerance in this problem we
// need a better estimator than Kelly
if (global_tolerance != 0.)
{
// We can't adapt to both a tolerance and a mesh
// size at once
libmesh_assert_equal_to (nelem_target, 0);
UniformRefinementEstimator * u =
new UniformRefinementEstimator;
// The lid-driven cavity problem isn't in H1, so
// lets estimate L2 error
u->error_norm = L2;
error_estimator.reset(u);
}
else
{
// If we aren't adapting to a tolerance we need a
// target mesh size
libmesh_assert_greater (nelem_target, 0);
// Kelly is a lousy estimator to use for a problem
// not in H1 - if we were doing more than a few
// timesteps we'd need to turn off or limit the
// maximum level of our adaptivity eventually
error_estimator.reset(new KellyErrorEstimator);
}
error_estimator->estimate_error(system, error);
// Print out status at each adaptive step.
Real global_error = error.l2_norm();
libMesh::out << "Adaptive step "
<< a_step
<< ": "
<< std::endl;
if (global_tolerance != 0.)
libMesh::out << "Global_error = "
<< global_error
<< std::endl;
if (global_tolerance != 0.)
libMesh::out << "Worst element error = "
<< error.maximum()
<< ", mean = "
<< error.mean()
<< std::endl;
if (global_tolerance != 0.)
{
// If we've reached our desired tolerance, we
// don't need any more adaptive steps
if (global_error < global_tolerance)
break;
mesh_refinement.flag_elements_by_error_tolerance(error);
}
else
{
// If flag_elements_by_nelem_target returns true, this
// should be our last adaptive step.
if (mesh_refinement.flag_elements_by_nelem_target(error))
{
mesh_refinement.refine_and_coarsen_elements();
equation_systems.reinit();
a_step = max_adaptivesteps;
break;
}
}
// Carry out the adaptive mesh refinement/coarsening
mesh_refinement.refine_and_coarsen_elements();
equation_systems.reinit();
libMesh::out << "Refined mesh to "
<< mesh.n_active_elem()
<< " active elements and "
<< equation_systems.n_active_dofs()
<< " active dofs."
<< std::endl;
}
// Do one last solve if necessary
if (a_step == max_adaptivesteps)
{
system.solve();
system.postprocess();
}
#ifdef LIBMESH_HAVE_EXODUS_API
ExodusII_IO(mesh).write_equation_systems
("out.e", equation_systems);
#endif // #ifdef LIBMESH_HAVE_EXODUS_API
#ifdef LIBMESH_HAVE_GMV
GMVIO(mesh).write_equation_systems
("out.gmv", equation_systems);
#endif // #ifdef LIBMESH_HAVE_GMV
#ifdef LIBMESH_HAVE_FPARSER
// Check that we got close to the analytic solution
ExactSolution exact_sol(equation_systems);
const std::string exact_str = (dim == 2) ?
"sin(pi*x)*sin(pi*y)" : "sin(pi*x)*sin(pi*y)*sin(pi*z)";
ParsedFunction<Number> exact_func(exact_str);
exact_sol.attach_exact_value(0, &exact_func);
exact_sol.compute_error("Heat", "T");
Number err = exact_sol.l2_error("Heat", "T");
// Print out the error value
libMesh::out << "L2-Error is: " << err << std::endl;
libmesh_assert_less(libmesh_real(err), 2e-3);
#endif // #ifdef LIBMESH_HAVE_FPARSER
#endif // #ifndef LIBMESH_ENABLE_AMR
// All done.
return 0;
}
int main(int argc, char** argv){
//initialize libMesh
LibMeshInit init(argc, argv);
//parameters
GetPot infile("fem_system_params.in");
const Real global_tolerance = infile("global_tolerance", 0.);
const unsigned int nelem_target = infile("n_elements", 400);
const bool transient = infile("transient", true);
const Real deltat = infile("deltat", 0.005);
unsigned int n_timesteps = infile("n_timesteps", 1);
//const unsigned int coarsegridsize = infile("coarsegridsize", 1);
const unsigned int coarserefinements = infile("coarserefinements", 0);
const unsigned int max_adaptivesteps = infile("max_adaptivesteps", 10);
const unsigned int dim = 2;
#ifdef LIBMESH_HAVE_EXODUS_API
const unsigned int write_interval = infile("write_interval", 5);
#endif
// Create a mesh, with dimension to be overridden later, distributed
// across the default MPI communicator.
Mesh mesh(init.comm());
GetPot infileForMesh("diff_convdiff_inv.in");
std::string find_mesh_here = infileForMesh("divided_mesh","meep.exo");
mesh.read(find_mesh_here);
// And an object to refine it
MeshRefinement mesh_refinement(mesh);
mesh_refinement.coarsen_by_parents() = true;
mesh_refinement.absolute_global_tolerance() = global_tolerance;
mesh_refinement.nelem_target() = nelem_target;
mesh_refinement.refine_fraction() = 0.3;
mesh_refinement.coarsen_fraction() = 0.3;
mesh_refinement.coarsen_threshold() = 0.1;
mesh_refinement.uniformly_refine(coarserefinements);
// Print information about the mesh to the screen.
mesh.print_info();
// Create an equation systems object.
EquationSystems equation_systems (mesh);
//name system
Diff_ConvDiff_InvSys & system =
equation_systems.add_system<Diff_ConvDiff_InvSys>("Diff_ConvDiff_InvSys");
//steady-state problem
system.time_solver =
AutoPtr<TimeSolver>(new SteadySolver(system));
libmesh_assert_equal_to (n_timesteps, 1);
std::string linearizeHere = "invHF.xda";
equation_systems.read(linearizeHere, READ,
EquationSystems::READ_HEADER |
EquationSystems::READ_DATA |
EquationSystems::READ_ADDITIONAL_DATA);
std::cout << "\n READING IN INITIAL GUESS" << std::endl;
// Initialize the system
//equation_systems.init ();
// Set the time stepping options
system.deltat = deltat; //this is ignored for SteadySolver...right?
// And the nonlinear solver options
NewtonSolver *solver = new NewtonSolver(system);
system.time_solver->diff_solver() = AutoPtr<DiffSolver>(solver);
solver->quiet = infile("solver_quiet", true);
solver->verbose = !solver->quiet;
solver->max_nonlinear_iterations =
infile("max_nonlinear_iterations", 15);
solver->relative_step_tolerance =
infile("relative_step_tolerance", 1.e-3);
solver->relative_residual_tolerance =
infile("relative_residual_tolerance", 0.0);
solver->absolute_residual_tolerance =
infile("absolute_residual_tolerance", 0.0);
// And the linear solver options
solver->max_linear_iterations =
infile("max_linear_iterations", 50000);
solver->initial_linear_tolerance =
infile("initial_linear_tolerance", 1.e-3);
// Print information about the system to the screen.
equation_systems.print_info();
// Now we begin the timestep loop to compute the time-accurate
// solution of the equations...not that this is transient, but eh, why not...
for (unsigned int t_step=0; t_step != n_timesteps; ++t_step){
// A pretty update message
std::cout << "\n\nSolving time step " << t_step << ", time = "
<< system.time << std::endl;
// Adaptively solve the timestep
unsigned int a_step = 0;
for (; a_step != max_adaptivesteps; ++a_step)
{
system.solve();
system.postprocess();
ErrorVector error;
AutoPtr<ErrorEstimator> error_estimator;
// To solve to a tolerance in this problem we
// need a better estimator than Kelly
if (global_tolerance != 0.)
{
// We can't adapt to both a tolerance and a mesh
// size at once
libmesh_assert_equal_to (nelem_target, 0);
UniformRefinementEstimator *u =
new UniformRefinementEstimator;
// The lid-driven cavity problem isn't in H1, so
// lets estimate L2 error
u->error_norm = L2;
error_estimator.reset(u);
}
else
{
// If we aren't adapting to a tolerance we need a
// target mesh size
libmesh_assert_greater (nelem_target, 0);
// Kelly is a lousy estimator to use for a problem
// not in H1 - if we were doing more than a few
// timesteps we'd need to turn off or limit the
// maximum level of our adaptivity eventually
error_estimator.reset(new KellyErrorEstimator);
}
// Calculate error
std::vector<Real> weights(3,1.0);
// Keep the same default norm type.
std::vector<FEMNormType>
norms(1, error_estimator->error_norm.type(0));
error_estimator->error_norm = SystemNorm(norms, weights);
error_estimator->estimate_error(system, error);
// Print out status at each adaptive step.
Real global_error = error.l2_norm();
std::cout << "Adaptive step " << a_step << ": " << std::endl;
if (global_tolerance != 0.)
std::cout << "Global_error = " << global_error
<< std::endl;
if (global_tolerance != 0.)
std::cout << "Worst element error = " << error.maximum()
<< ", mean = " << error.mean() << std::endl;
if (global_tolerance != 0.)
{
// If we've reached our desired tolerance, we
// don't need any more adaptive steps
if (global_error < global_tolerance)
break;
mesh_refinement.flag_elements_by_error_tolerance(error);
}
else
{
// If flag_elements_by_nelem_target returns true, this
// should be our last adaptive step.
if (mesh_refinement.flag_elements_by_nelem_target(error))
{
mesh_refinement.refine_and_coarsen_elements();
equation_systems.reinit();
a_step = max_adaptivesteps;
break;
}
}
// Carry out the adaptive mesh refinement/coarsening
mesh_refinement.refine_and_coarsen_elements();
equation_systems.reinit();
std::cout << "Refined mesh to "
<< mesh.n_active_elem()
<< " active elements and "
<< equation_systems.n_active_dofs()
<< " active dofs." << std::endl;
}
// Do one last solve if necessary
if (a_step == max_adaptivesteps)
{
using std::chrono::duration_cast;
using std::chrono::milliseconds;
typedef std::chrono::high_resolution_clock clock;
auto start = clock::now();
system.solve();
auto end = clock::now();
std::cout << "\n Solve took " << duration_cast<milliseconds>(end-start).count() << " ms\n" << std::endl;
system.postprocess();
Number QoI_computed = system.get_QoI_value("computed", 0);
std::cout<< "Computed QoI is " << std::setprecision(17) << QoI_computed << std::endl;
}
// Advance to the next timestep in a transient problem
system.time_solver->advance_timestep();
#ifdef LIBMESH_HAVE_EXODUS_API
// Write out this timestep if we're requested to
if ((t_step+1)%write_interval == 0)
{
std::ostringstream file_name;
// We write the file in the ExodusII format.
file_name << "out_"
<< std::setw(3)
<< std::setfill('0')
<< std::right
<< t_step+1
<< ".e";
ExodusII_IO(mesh).write_timestep(file_name.str(),
equation_systems,
1, /* This number indicates how many time steps
are being written to the file */
system.time);
equation_systems.write("invHF.xda", WRITE, EquationSystems::WRITE_DATA |
EquationSystems::WRITE_ADDITIONAL_DATA);
}
#endif // #ifdef LIBMESH_HAVE_EXODUS_API
}
// All done.
return 0;
} //end main