void run_sim(Int_t gen=1, Int_t nEvents = 1, Int_t fileNum = 100)
{
TString rootVersion = "feb16";
const char* setup = "sis100_electron";
TString sfileNum = "";
sfileNum += fileNum;
// ========================================================================
// Adjust this part according to your requirements
// ----- Paths and file names --------------------------------------------
TString inDir = "/hera/cbm/users/klochkov/cbm/data/input/au10au/shield/test_10k/";
TString inFile = inDir + "au10au_" + sfileNum + ".root";
TString outDir = "/hera/cbm/users/klochkov/cbm/data/au10au_10k_test_1/";
TString outFile = outDir + "sim/mc_" + sfileNum + ".root";
TString parFile = outDir + "sim/params_" + sfileNum + ".root";
TString geoFileNamePsd = outDir + "geo/psd_geo_xy_" + sfileNum + ".txt";
TString geoFileName = outDir + "geo/geofile_" + sfileNum + ".root";
TString SourceDir = gSystem->Getenv("VMCWORKDIR");
TString setupFile = SourceDir + "/geometry/setup/sis100_electron_setup.C"; //TODO
TString setupFunct = setup;
setupFunct += "_setup()";
gROOT->LoadMacro(setupFile);
gInterpreter->ProcessLine(setupFunct);
// Function needed for CTest runtime dependency
// TString depFile = Remove_CTest_Dependency_File(outDir, "run_sim" , setup);
// --- Logger settings ----------------------------------------------------
TString logLevel = "INFO"; // "DEBUG";
TString logVerbosity = "LOW";
// ------------------------------------------------------------------------
// --- Define the target geometry -----------------------------------------
//
// The target is not part of the setup, since one and the same setup can
// and will be used with different targets.
// The target is constructed as a tube in z direction with the specified
// diameter (in x and y) and thickness (in z). It will be placed at the
// specified position as daughter volume of the volume present there. It is
// in the responsibility of the user that no overlaps or extrusions are
// created by the placement of the target.
//
TString targetElement = "Gold";
Double_t targetThickness = 0.025; // full thickness in cm
Double_t targetDiameter = 2.5; // diameter in cm
Double_t targetPosX = 0.; // target x position in global c.s. [cm]
Double_t targetPosY = 0.; // target y position in global c.s. [cm]
Double_t targetPosZ = 0.; // target z position in global c.s. [cm]
Double_t targetRotY = 0.; // target rotation angle around the y axis [deg]
// ------------------------------------------------------------------------
// --- Define the creation of the primary vertex ------------------------
//
// By default, the primary vertex point is sampled from a Gaussian
// distribution in both x and y with the specified beam profile width,
// and from a flat distribution in z over the extension of the target.
// By setting the respective flags to kFALSE, the primary vertex will always
// at the (0., 0.) in x and y and in the z centre of the target, respectively.
//
Bool_t smearVertexXY = kTRUE;
Bool_t smearVertexZ = kTRUE;
Double_t beamWidthX = 1.; // Gaussian sigma of the beam profile in x [cm]
Double_t beamWidthY = 1.; // Gaussian sigma of the beam profile in y [cm]
// ------------------------------------------------------------------------
// In general, the following parts need not be touched
// ========================================================================
cout << "[INFO ] Setup: " << setup << endl;
// ---- Debug option -------------------------------------------------
gDebug = 0;
// ------------------------------------------------------------------------
// ----- Timer --------------------------------------------------------
TStopwatch timer;
timer.Start();
// ------------------------------------------------------------------------
// ----- Create simulation run ----------------------------------------
FairRunSim* run = new FairRunSim();
run->SetName("TGeant4"); // Transport engine
run->SetOutputFile(outFile); // Output file
run->SetGenerateRunInfo(kTRUE); // Create FairRunInfo file
FairRuntimeDb* rtdb = run->GetRuntimeDb();
// ------------------------------------------------------------------------
// ----- Logger settings ----------------------------------------------
gLogger->SetLogScreenLevel(logLevel.Data());
gLogger->SetLogVerbosityLevel(logVerbosity.Data());
// ------------------------------------------------------------------------
// ----- Create media -------------------------------------------------
run->SetMaterials("media.geo"); // Materials
// ------------------------------------------------------------------------
// ----- Create detectors and passive volumes -------------------------
if ( caveGeom != "" ) {
FairModule* cave = new CbmCave("CAVE");
cave->SetGeometryFileName(caveGeom);
run->AddModule(cave);
}
if ( pipeGeom != "" ) {
FairModule* pipe = new CbmPipe("PIPE");
pipe->SetGeometryFileName(pipeGeom);
run->AddModule(pipe);
}
// --- Target
CbmTarget* target = new CbmTarget(targetElement.Data(),
targetThickness,
targetDiameter);
target->SetPosition(targetPosX, targetPosY, targetPosZ);
target->SetRotation(targetRotY);
run->AddModule(target);
if ( magnetGeom != "" ) {
FairModule* magnet = new CbmMagnet("MAGNET");
magnet->SetGeometryFileName(magnetGeom);
run->AddModule(magnet);
}
if ( platformGeom != "" ) {
FairModule* platform = new CbmPlatform("PLATFORM");
platform->SetGeometryFileName(platformGeom);
run->AddModule(platform);
}
if ( mvdGeom != "" ) {
FairDetector* mvd = new CbmMvd("MVD", kTRUE);
mvd->SetGeometryFileName(mvdGeom);
mvd->SetMotherVolume("pipevac1");
run->AddModule(mvd);
}
if ( stsGeom != "" ) {
FairDetector* sts = new CbmStsMC(kTRUE);
sts->SetGeometryFileName(stsGeom);
run->AddModule(sts);
}
if ( richGeom != "" ) {
FairDetector* rich = new CbmRich("RICH", kTRUE);
rich->SetGeometryFileName(richGeom);
run->AddModule(rich);
}
if ( muchGeom != "" ) {
FairDetector* much = new CbmMuch("MUCH", kTRUE);
much->SetGeometryFileName(muchGeom);
run->AddModule(much);
}
if ( shieldGeom != "" ) {
FairModule* shield = new CbmShield("SHIELD");
shield->SetGeometryFileName(shieldGeom);
run->AddModule(shield);
}
if ( trdGeom != "" ) {
FairDetector* trd = new CbmTrd("TRD",kTRUE );
trd->SetGeometryFileName(trdGeom);
run->AddModule(trd);
}
if ( tofGeom != "" ) {
FairDetector* tof = new CbmTof("TOF", kTRUE);
tof->SetGeometryFileName(tofGeom);
run->AddModule(tof);
}
if ( ecalGeom != "" ) {
FairDetector* ecal = new CbmEcal("ECAL", kTRUE, ecalGeom.Data());
run->AddModule(ecal);
}
// if ( psdGeom != "" ) {
TString geoFileNamePsd = outDir + "geo/psd_geo_xy_" + sfileNum + ".txt";
cout << "Constructing PSD" << endl;
// CbmPsdv1* psd= new CbmPsdv1("PSD", kTRUE);
CbmPsdTest* psd= new CbmPsdTest("PSD", kTRUE);
psd->SetZposition(psdZpos); // in cm
psd->SetXshift(psdXpos); // in cm
psd->SetGeoFile(geoFileNamePsd);
psd->SetHoleSize(6);
run->AddModule(psd);
// }
// ------------------------------------------------------------------------
// ----- Create magnetic field ----------------------------------------
CbmFieldMap* magField = NULL;
if ( 2 == fieldSymType ) {
magField = new CbmFieldMapSym2(fieldMap);
} else if ( 3 == fieldSymType ) {
magField = new CbmFieldMapSym3(fieldMap);
}
magField->SetPosition(0., 0., fieldZ);
magField->SetScale(fieldScale);
run->SetField(magField);
// ------------------------------------------------------------------------
// ----- Create PrimaryGenerator --------------------------------------
FairPrimaryGenerator* primGen = new FairPrimaryGenerator();
// --- Uniform distribution of event plane angle
// primGen->SetEventPlane(0., 2. * TMath::Pi()); //TODO (ask Vitaly) check event plane
// --- Get target parameters
Double_t tX = 0.;
Double_t tY = 0.;
Double_t tZ = 0.;
Double_t tDz = 0.;
if ( target ) {
target->GetPosition(tX, tY, tZ);
tDz = target->GetThickness();
}
primGen->SetTarget(tZ, tDz);
primGen->SetBeam(0., 0., beamWidthX, beamWidthY);
primGen->SmearGausVertexXY(smearVertexXY);
primGen->SmearVertexZ(smearVertexZ);
//
// TODO: Currently, there is no guaranteed consistency of the beam profile
// and the transversal target dimension, i.e., that the sampled primary
// vertex falls into the target volume. This would require changes
// in the FairPrimaryGenerator class.
// ------------------------------------------------------------------------
// Use the CbmUnigenGenrator for the input
if (gen == 0) {
CbmUnigenGenerator* urqmdGen = new CbmUnigenGenerator(inFile);
urqmdGen->SetEventPlane(-TMath::Pi(), TMath::Pi());
primGen->AddGenerator(urqmdGen);
}
if (gen == 1) {
CbmShieldGeneratorNew* shieldGen = new CbmShieldGeneratorNew (inFile);
primGen->AddGenerator(shieldGen);
}
run->SetGenerator(primGen);
// ------------------------------------------------------------------------
// Visualisation of trajectories (TGeoManager Only)
// Switch this on if you want to visualise tracks in the event display.
// This is normally switch off, because of the huge files created
// when it is switched on.
run->SetStoreTraj(kFALSE);
// ----- Run initialisation -------------------------------------------
run->Init();
// ------------------------------------------------------------------------
// Set cuts for storing the trajectories.
// Switch this on only if trajectories are stored.
// Choose this cuts according to your needs, but be aware
// that the file size of the output file depends on these cuts
FairTrajFilter* trajFilter = FairTrajFilter::Instance();
if ( trajFilter ) {
trajFilter->SetStepSizeCut(0.01); // 1 cm
trajFilter->SetVertexCut(-2000., -2000., 4., 2000., 2000., 100.);
trajFilter->SetMomentumCutP(10e-3); // p_lab > 10 MeV
trajFilter->SetEnergyCut(0., 1.02); // 0 < Etot < 1.04 GeV
trajFilter->SetStorePrimaries(kTRUE);
trajFilter->SetStoreSecondaries(kTRUE);
}
// ----- Runtime database ---------------------------------------------
CbmFieldPar* fieldPar = (CbmFieldPar*) rtdb->getContainer("CbmFieldPar");
fieldPar->SetParameters(magField);
fieldPar->setChanged();
fieldPar->setInputVersion(run->GetRunId(),1);
Bool_t kParameterMerged = kTRUE;
FairParRootFileIo* parOut = new FairParRootFileIo(kParameterMerged);
parOut->open(parFile.Data());
rtdb->setOutput(parOut);
rtdb->saveOutput();
rtdb->print();
// ------------------------------------------------------------------------
// ----- Start run ----------------------------------------------------
run->Run(nEvents);
// ------------------------------------------------------------------------
run->CreateGeometryFile(geoFileName);
// ----- Finish -------------------------------------------------------
timer.Stop();
Double_t rtime = timer.RealTime();
Double_t ctime = timer.CpuTime();
std::cout << std::endl << std::endl;
std::cout << "Macro finished successfully." << std::endl;
std::cout << "Output file is " << outFile << std::endl;
std::cout << "Parameter file is " << parFile << std::endl;
std::cout << "Real time " << rtime << " s, CPU time " << ctime
<< "s" << std::endl << std::endl;
// ------------------------------------------------------------------------
std::cout << " Test passed" << std::endl;
std::cout << " All ok " << std::endl;
// Function needed for CTest runtime dependency
// Generate_CTest_Dependency_File(depFile);
}
void run_rad(Int_t nEvents = 100, TString mcEngine="TGeant3")
{
TString dir = gSystem->Getenv("VMCWORKDIR");
TString tutdir = dir + "/rutherford/macros";
TString tut_geomdir = dir + "/geometry";
gSystem->Setenv("GEOMPATH",tut_geomdir.Data());
TString tut_configdir = dir + "/gconfig";
gSystem->Setenv("CONFIG_DIR",tut_configdir.Data());
TString outDir = "data";
TString outFile = outDir + "/test1_";
outFile = outFile + mcEngine + ".mc.root";
TString parFile = outDir + "/params1_";
parFile = parFile + mcEngine + ".root";
// In general, the following parts need not be touched
// ========================================================================
// ---- Debug option -------------------------------------------------
gDebug = 0;
// ------------------------------------------------------------------------
// ----- Timer --------------------------------------------------------
TStopwatch timer;
timer.Start();
// ------------------------------------------------------------------------
FairLogger *logger = FairLogger::GetLogger();
// define log file name
logger->SetLogFileName("MyLog.log");
// log to screen and to file
logger->SetLogToScreen(kTRUE);
logger->SetLogToFile(kTRUE);
// Print very accurate output. Levels are LOW, MEDIUM and HIGH
logger->SetLogVerbosityLevel("HIGH");
// ----- Create simulation run ----------------------------------------
FairRunSim* run = new FairRunSim();
run->SetName(mcEngine); // Transport engine
run->SetOutputFile(outFile); // Output file
FairRuntimeDb* rtdb = run->GetRuntimeDb();
// ------------------------------------------------------------------------
// ----- Create media -------------------------------------------------
run->SetMaterials("media.geo"); // Materials
// ------------------------------------------------------------------------
//----Start the radiation length manager ----------------------------------
run->SetRadLenRegister(kTRUE);
// ----- Create geometry ----------------------------------------------
FairModule* cave= new FairCave("CAVE");
cave->SetGeometryFileName("cave_vacuum.geo");
run->AddModule(cave);
FairModule* target= new FairTarget("Target");
target->SetGeometryFileName("target_rutherford.geo");
run->AddModule(target);
FairDetector* rutherford = new FairRutherford("RutherfordDetector", kFALSE);
rutherford->SetGeometryFileName("rutherford.geo");
run->AddModule(rutherford);
// ------------------------------------------------------------------------
// ----- Create PrimaryGenerator --------------------------------------
FairPrimaryGenerator* primGen = new FairPrimaryGenerator();
run->SetGenerator(primGen);
FairBoxGenerator* boxGen1 = new FairBoxGenerator(0, 1);
boxGen1->SetPRange(.005,.005);
boxGen1->SetPhiRange(0.,0.);
boxGen1->SetThetaRange(-90.,90.);
boxGen1->SetXYZ(0.,0.,-3.);
primGen->AddGenerator(boxGen1);
// ------------------------------------------------------------------------
run->SetStoreTraj(kTRUE);
// ----- Run initialisation -------------------------------------------
run->Init();
// ------------------------------------------------------------------------
// Set cuts for storing the trajectories.
// Switch this on only if trajectories are stored.
// Choose this cuts according to your needs, but be aware
// that the file size of the output file depends on these cuts
FairTrajFilter* trajFilter = FairTrajFilter::Instance();
// trajFilter->SetStepSizeCut(0.01); // 1 cm
// trajFilter->SetVertexCut(-2000., -2000., 4., 2000., 2000., 100.);
// trajFilter->SetMomentumCutP(10e-3); // p_lab > 10 MeV
// trajFilter->SetEnergyCut(0., 1.02); // 0 < Etot < 1.04 GeV
trajFilter->SetStorePrimaries(kTRUE);
trajFilter->SetStoreSecondaries(kTRUE);
// ------------------------------------------------------------------------
// ----- Runtime database ---------------------------------------------
Bool_t kParameterMerged = kTRUE;
FairParRootFileIo* parOut = new FairParRootFileIo(kParameterMerged);
parOut->open(parFile.Data());
rtdb->setOutput(parOut);
rtdb->saveOutput();
rtdb->print();
// ------------------------------------------------------------------------
// ----- Start run ----------------------------------------------------
run->Run(nEvents);
// ------------------------------------------------------------------------
run->CreateGeometryFile("data/geofile_full.root");
// ----- Finish -------------------------------------------------------
timer.Stop();
Double_t rtime = timer.RealTime();
Double_t ctime = timer.CpuTime();
cout << endl << endl;
cout << "Macro finished succesfully." << endl;
cout << "Output file is " << outFile << endl;
cout << "Parameter file is " << parFile << endl;
cout << "Real time " << rtime << " s, CPU time " << ctime
<< "s" << endl << endl;
// ------------------------------------------------------------------------
}
