Beispiel #1
0
int main(int argc, char *argv[])
{
    int i;
#ifdef COMPILE_WITH_GUI
    bool gui = false;
#endif
    bool verbose = false;
    bool keep_lastiling = false;
    U32 chopchop = 0;
    bool projection_was_set = false;
    double start_time = 0;

    LASreadOpener lasreadopener;
    GeoProjectionConverter geoprojectionconverter;
    LASwriteOpener laswriteopener;

    if (argc == 1)
    {
#ifdef COMPILE_WITH_GUI
        return lasmerge_gui(argc, argv, 0);
#else
        fprintf(stderr,"%s is better run in the command line\n", argv[0]);
        char file_name[256];
        fprintf(stderr,"enter input file 1: ");
        fgets(file_name, 256, stdin);
        file_name[strlen(file_name)-1] = '\0';
        lasreadopener.add_file_name(file_name);
        fprintf(stderr,"enter input file 2: ");
        fgets(file_name, 256, stdin);
        file_name[strlen(file_name)-1] = '\0';
        lasreadopener.add_file_name(file_name);
        fprintf(stderr,"enter output file: ");
        fgets(file_name, 256, stdin);
        file_name[strlen(file_name)-1] = '\0';
        laswriteopener.set_file_name(file_name);
#endif
    }
    else
    {
        for (i = 1; i < argc; i++)
        {
            if (argv[i][0] == '–') argv[i][0] = '-';
        }
        if (!geoprojectionconverter.parse(argc, argv)) byebye(true);
        if (!lasreadopener.parse(argc, argv)) byebye(true);
        if (!laswriteopener.parse(argc, argv)) byebye(true);
    }

    for (i = 1; i < argc; i++)
    {
        if (argv[i][0] == '\0')
        {
            continue;
        }
        else if (strcmp(argv[i],"-h") == 0 || strcmp(argv[i],"-help") == 0)
        {
            fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
            usage();
        }
        else if (strcmp(argv[i],"-v") == 0 || strcmp(argv[i],"-verbose") == 0)
        {
            verbose = true;
        }
        else if (strcmp(argv[i],"-version") == 0)
        {
            fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
            byebye();
        }
        else if (strcmp(argv[i],"-gui") == 0)
        {
#ifdef COMPILE_WITH_GUI
            gui = true;
#else
            fprintf(stderr, "WARNING: not compiled with GUI support. ignoring '-gui' ...\n");
#endif
        }
        else if (strcmp(argv[i],"-split") == 0)
        {
            if ((i+1) >= argc)
            {
                fprintf(stderr,"ERROR: '%s' needs 1 argument: size\n", argv[i]);
                byebye(true);
            }
            i++;
            chopchop = atoi(argv[i]);
        }
        else if (strcmp(argv[i],"-keep_lastiling") == 0)
        {
            keep_lastiling = true;
        }
        else if ((argv[i][0] != '-') && (lasreadopener.get_file_name_number() == 0))
        {
            lasreadopener.add_file_name(argv[i]);
            argv[i][0] = '\0';
        }
        else
        {
            fprintf(stderr, "ERROR: cannot understand argument '%s'\n", argv[i]);
            byebye(true);
        }
    }

#ifdef COMPILE_WITH_GUI
    if (gui)
    {
        return lasmerge_gui(argc, argv, &lasreadopener);
    }
#endif

    // read all the input files merged

    lasreadopener.set_merged(TRUE);

    // maybe we want to keep the lastiling

    if (keep_lastiling)
    {
        lasreadopener.set_keep_lastiling(TRUE);
    }

    // we need to precompute the bounding box

    lasreadopener.set_populate_header(TRUE);

    // check input and output

    if (!lasreadopener.active())
    {
        fprintf(stderr, "ERROR: no input specified\n");
        byebye(true, argc==1);
    }

    if (!laswriteopener.active())
    {
        fprintf(stderr, "ERROR: no output specified\n");
        byebye(true, argc==1);
    }

    // make sure we do not corrupt the input file

    if (lasreadopener.get_file_name() && laswriteopener.get_file_name() && (strcmp(lasreadopener.get_file_name(), laswriteopener.get_file_name()) == 0))
    {
        fprintf(stderr, "ERROR: input and output file name are identical\n");
        usage(true);
    }

    // check if projection info was set in the command line

    int number_of_keys;
    GeoProjectionGeoKeys* geo_keys = 0;
    int num_geo_double_params;
    double* geo_double_params = 0;

    if (geoprojectionconverter.has_projection())
    {
        projection_was_set = geoprojectionconverter.get_geo_keys_from_projection(number_of_keys, &geo_keys, num_geo_double_params, &geo_double_params);
    }

    if (verbose) start_time = taketime();

    LASreader* lasreader = lasreadopener.open();
    if (lasreader == 0)
    {
        fprintf(stderr, "ERROR: could not open lasreader\n");
        byebye(true, argc==1);
    }

#ifdef _WIN32
    if (verbose) {
        fprintf(stderr,"merging headers took %g sec. there are %I64d points in total.\n", taketime()-start_time, lasreader->npoints);
        start_time = taketime();
    }
#else
    if (verbose) {
        fprintf(stderr,"merging headers took %g sec. there are %lld points in total.\n", taketime()-start_time, lasreader->npoints);
        start_time = taketime();
    }
#endif

    // prepare the header for the surviving points

    strncpy(lasreader->header.system_identifier, "LAStools (c) by rapidlasso GmbH", 32);
    lasreader->header.system_identifier[31] = '\0';
    char temp[64];
    sprintf(temp, "lasmerge (version %d)", LAS_TOOLS_VERSION);
    strncpy(lasreader->header.generating_software, temp, 32);
    lasreader->header.generating_software[31] = '\0';

    if (projection_was_set)
    {
        lasreader->header.set_geo_keys(number_of_keys, (LASvlr_key_entry*)geo_keys);
        free(geo_keys);
        if (geo_double_params)
        {
            lasreader->header.set_geo_double_params(num_geo_double_params, geo_double_params);
            free(geo_double_params);
        }
        else
        {
            lasreader->header.del_geo_double_params();
        }
        lasreader->header.del_geo_ascii_params();
    }

    if (chopchop)
    {
        I32 file_number = 0;
        LASwriter* laswriter = 0;
        // loop over the points
        while (lasreader->read_point())
        {
            if (laswriter == 0)
            {
                // open the next writer
                laswriteopener.make_file_name(0, file_number);
                file_number++;
                laswriter = laswriteopener.open(&lasreader->header);
            }
            laswriter->write_point(&lasreader->point);
            laswriter->update_inventory(&lasreader->point);
            if (laswriter->p_count == chopchop)
            {
                // close the current writer
                laswriter->update_header(&lasreader->header, TRUE);
                laswriter->close();
                if (verbose) {
                    fprintf(stderr,"splitting file '%s' took %g sec.\n", laswriteopener.get_file_name(), taketime()-start_time);
                    start_time = taketime();
                }
                delete laswriter;
                laswriter = 0;
            }
        }
        if (laswriter && laswriter->p_count)
        {
            // close the current writer
            laswriter->update_header(&lasreader->header, TRUE);
            laswriter->close();
            if (verbose) {
                fprintf(stderr,"splitting file '%s' took %g sec.\n", laswriteopener.get_file_name(), taketime()-start_time);
                start_time = taketime();
            }
            delete laswriter;
            laswriter = 0;
        }
    }
    else
    {
        // open the writer
        LASwriter* laswriter = laswriteopener.open(&lasreader->header);
        if (laswriter == 0)
        {
            fprintf(stderr, "ERROR: could not open laswriter\n");
            byebye(true, argc==1);
        }
        // loop over the points
        while (lasreader->read_point())
        {
            laswriter->write_point(&lasreader->point);
            laswriter->update_inventory(&lasreader->point);
        }
        // close the writer
        laswriter->update_header(&lasreader->header, TRUE);
        laswriter->close();
        if (verbose) fprintf(stderr,"merging files took %g sec.\n", taketime()-start_time);
        delete laswriter;
    }

    lasreader->close();
    delete lasreader;

    byebye(false, argc==1);

    return 0;
}
int main(int argc, char *argv[])
{
  int i;
#ifdef COMPILE_WITH_GUI
  bool gui = false;
#endif
#ifdef COMPILE_WITH_MULTI_CORE
  I32 cores = 1;
#endif
  bool verbose = false;
  bool report_diff = true;
  bool report_diff_diff = false;
  bool report_x = true;
  bool report_y = true;
  bool report_z = true;
  bool report_gps = false;
  bool report_rgb = false;
  bool output = false;
  U32 report_lines = 20;
  U32 array_max = 5000000;
  bool projection_was_set = false;
  double start_time = 0;
  double full_start_time = 0;

  LASreadOpener lasreadopener;
  GeoProjectionConverter geoprojectionconverter;
  LASwriteOpener laswriteopener;

  if (argc == 1)
  {
#ifdef COMPILE_WITH_GUI
    return lasprecision_gui(argc, argv, 0);
#else
    fprintf(stderr,"lasprecision.exe is better run in the command line\n");
    char file_name[256];
    fprintf(stderr,"enter input file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    lasreadopener.set_file_name(file_name);
    fprintf(stderr,"enter output file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    laswriteopener.set_file_name(file_name);
#endif
  }
  else
  {
    for (i = 1; i < argc; i++)
    {
      if (argv[i][0] == '–') argv[i][0] = '-';
      if (strcmp(argv[i],"-o") == 0 || strcmp(argv[i],"-olas") == 0 || strcmp(argv[i],"-olaz") == 0 || strcmp(argv[i],"-obin") == 0 || strcmp(argv[i],"-otxt") == 0 || strcmp(argv[i],"-reoffset") == 0 || strcmp(argv[i],"-rescale") == 0)
      {
        output = true;
        break;
      }
    }
    if (!geoprojectionconverter.parse(argc, argv)) byebye(true);
    if (!lasreadopener.parse(argc, argv)) byebye(true);
    if (!laswriteopener.parse(argc, argv)) byebye(true);
  }

  for (i = 1; i < argc; i++)
  {
    if (argv[i][0] == '\0')
    {
      continue;
    }
    else if (strcmp(argv[i],"-h") == 0 || strcmp(argv[i],"-help") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      usage();
    }
    else if (strcmp(argv[i],"-v") == 0 || strcmp(argv[i],"-verbose") == 0)
    {
      verbose = true;
    }
    else if (strcmp(argv[i],"-version") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      byebye();
    }
    else if (strcmp(argv[i],"-gui") == 0)
    {
#ifdef COMPILE_WITH_GUI
      gui = true;
#else
      fprintf(stderr, "WARNING: not compiled with GUI support. ignoring '-gui' ...\n");
#endif
    }
    else if (strcmp(argv[i],"-cores") == 0)
    {
#ifdef COMPILE_WITH_MULTI_CORE
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        usage(true);
      }
      argv[i][0] = '\0';
      i++;
      cores = atoi(argv[i]);
      argv[i][0] = '\0';
#else
      fprintf(stderr, "WARNING: not compiled with multi-core batching. ignoring '-cores' ...\n");
      i++;
#endif
    }
    else if ((strcmp(argv[i],"-diff_diff") == 0) || (strcmp(argv[i],"-diff_diff_only") == 0))
    {
      report_diff_diff = true;
      report_diff = false;
    }
    else if (strcmp(argv[i],"-no_x") == 0)
    {
      report_x = false;
    }
    else if (strcmp(argv[i],"-no_y") == 0)
    {
      report_y = false;
    }
    else if (strcmp(argv[i],"-no_z") == 0)
    {
      report_z = false;
    }
    else if (strcmp(argv[i],"-gps") == 0)
    {
      report_gps = true;
    }
    else if (strcmp(argv[i],"-rgb") == 0)
    {
      report_rgb = true;
    }
    else if (strcmp(argv[i],"-number") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: max\n", argv[i]);
        byebye(true);
      }
      i++;
      array_max = atoi(argv[i]);
    }
    else if (strcmp(argv[i],"-lines") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        byebye(true);
      }
      i++;
      report_lines = atoi(argv[i]);
    }
    else if (strcmp(argv[i],"-all") == 0)
    {
      array_max = U32_MAX;
    }
    else if ((argv[i][0] != '-') && (lasreadopener.get_file_name_number() == 0))
    {
      lasreadopener.add_file_name(argv[i]);
      argv[i][0] = '\0';
    }
    else
    {
      fprintf(stderr, "ERROR: cannot understand argument '%s'\n", argv[i]);
      byebye(true);
    }
  }

#ifdef COMPILE_WITH_GUI
  if (gui)
  {
    return lasprecision_gui(argc, argv, &lasreadopener);
  }
#endif

#ifdef COMPILE_WITH_MULTI_CORE
  if ((cores > 1) && (lasreadopener.get_file_name_number() > 1) && (!lasreadopener.is_merged()))
  {
    return lasprecision_multi_core(argc, argv, &geoprojectionconverter, &lasreadopener, &laswriteopener, cores);
  }
#endif

  // check input

  if (!lasreadopener.active())
  {
    fprintf(stderr, "ERROR: no input specified\n");
    byebye(true, argc==1);
  }

  // make sure we do not corrupt the input file

  if (lasreadopener.get_file_name() && laswriteopener.get_file_name() && (strcmp(lasreadopener.get_file_name(), laswriteopener.get_file_name()) == 0))
  {
    fprintf(stderr, "ERROR: input and output file name are identical\n");
    usage(true);
  }

  // check if projection info was set in the command line

  int number_of_keys;
  GeoProjectionGeoKeys* geo_keys = 0;
  int num_geo_double_params;
  double* geo_double_params = 0;

  if (geoprojectionconverter.has_projection())
  {
    projection_was_set = geoprojectionconverter.get_geo_keys_from_projection(number_of_keys, &geo_keys, num_geo_double_params, &geo_double_params);
  }

  // possibly loop over multiple input files

  while (lasreadopener.active())
  {
    if (verbose) full_start_time = start_time = taketime();

    // open lasreader

    LASreader* lasreader = lasreadopener.open();
    if (lasreader == 0)
    {
      fprintf(stderr, "ERROR: could not open lasreader\n");
      byebye(true, argc==1);
    }

    // run presicion statistics across the first array_max points

    if (!output)
    {
      fprintf(stdout, "original scale factors: %g %g %g\n", lasreader->header.x_scale_factor, lasreader->header.y_scale_factor, lasreader->header.z_scale_factor);

      // create the arrays
      int* array_x = 0;
      int* array_y = 0;
      int* array_z = 0;
      if (report_x)
      {
        array_x = new int[array_max];
      }
      if (report_y)
      {
        array_y = new int[array_max];
      }
      if (report_z)
      {
        array_z = new int[array_max];
      }

      double* array_gps = 0;
      if (report_gps && lasreader->point.have_gps_time)
      {
        array_gps = new double[array_max];
      }

      short* array_r = 0;
      short* array_g = 0;
      short* array_b = 0;
      if (report_rgb && lasreader->point.have_rgb)
      {
        array_r = new short[array_max];
        array_g = new short[array_max];
        array_b = new short[array_max];
      }

      // do the first pass

      fprintf(stderr, "loading first %u of %u points\n", array_max, (U32)lasreader->npoints);

      // loop over points

      unsigned int array_count = 0;

      while ((lasreader->read_point()) && (array_count < array_max))
      {
        if (report_x)
        {
          array_x[array_count] = lasreader->point.get_X();
        }

        if (report_y)
        {
          array_y[array_count] = lasreader->point.get_Y();
        }

        if (report_z)
        {
          array_z[array_count] = lasreader->point.get_Z();
        }

        if (report_gps && lasreader->point.have_gps_time)
        {
          array_gps[array_count] = lasreader->point.gps_time;
        }

        if (report_rgb && lasreader->point.have_rgb)
        {
          array_r[array_count] = lasreader->point.rgb[0];
          array_g[array_count] = lasreader->point.rgb[1];
          array_b[array_count] = lasreader->point.rgb[2];
        }

        array_count++;
      }

      array_max = array_count;

      // sort values
  
      if (report_x)
      {
        quicksort_for_ints(array_x, 0, array_max-1);
      }

      if (report_y)
      {
        quicksort_for_ints(array_y, 0, array_max-1);
      }

      if (report_z)
      {
        quicksort_for_ints(array_z, 0, array_max-1);
      }
  
      if (report_gps && lasreader->point.have_gps_time)
      {
        quicksort_for_doubles(array_gps, 0, array_max-1);
      }

      if (report_rgb && lasreader->point.have_rgb)
      {
        quicksort_for_shorts(array_r, 0, array_max-1);
        quicksort_for_shorts(array_g, 0, array_max-1);
        quicksort_for_shorts(array_b, 0, array_max-1);
      }

      // create differences

      if (report_x)
      {
        for (array_count = 1; array_count < array_max; array_count++)
        {
          array_x[array_count-1] = array_x[array_count] - array_x[array_count-1];
        }
      }

      if (report_y)
      {
        for (array_count = 1; array_count < array_max; array_count++)
        {
          array_y[array_count-1] = array_y[array_count] - array_y[array_count-1];
        }
      }

      if (report_z)
      {
        for (array_count = 1; array_count < array_max; array_count++)
        {
          array_z[array_count-1] = array_z[array_count] - array_z[array_count-1];
        }
      }

      if (report_gps && lasreader->point.have_gps_time)
      {
        for (array_count = 1; array_count < array_max; array_count++)
        {
          array_gps[array_count-1] = array_gps[array_count] - array_gps[array_count-1];
        }
      }

      if (report_rgb && lasreader->point.have_rgb)
      {
        for (array_count = 1; array_count < array_max; array_count++)
        {
          array_r[array_count-1] = array_r[array_count] - array_r[array_count-1];
          array_g[array_count-1] = array_g[array_count] - array_g[array_count-1];
          array_b[array_count-1] = array_b[array_count] - array_b[array_count-1];
        }
      }

      // sort differences

      if (report_x)
      {
        quicksort_for_ints(array_x, 0, array_max-2);
      }

      if (report_y)
      {
        quicksort_for_ints(array_y, 0, array_max-2);
      }

      if (report_z)
      {
        quicksort_for_ints(array_z, 0, array_max-2);
      }
  
      if (report_gps && lasreader->point.have_gps_time)
      {
        quicksort_for_doubles(array_gps, 0, array_max-2);
      }

      if (report_rgb && lasreader->point.have_rgb)
      {
        quicksort_for_shorts(array_r, 0, array_max-2);
        quicksort_for_shorts(array_g, 0, array_max-2);
        quicksort_for_shorts(array_b, 0, array_max-2);
      }

      // compute difference of differences, sort them, output histogram

      // first for X & Y & Z

      unsigned int count_lines, array_last, array_first;
  
      if (report_x)
      {
        if (report_diff) fprintf(stdout, "X differences \n");
        for (count_lines = 0, array_first = 0, array_last = 0, array_count = 1; array_count < array_max; array_count++)
        {
          if (array_x[array_last] != array_x[array_count])
          {
            if (report_diff && (count_lines < report_lines)) {  count_lines++; fprintf(stdout, " %10d : %10d   %g\n", array_x[array_last], array_count - array_last, lasreader->header.x_scale_factor*array_x[array_last]); }
            array_x[array_first] = array_x[array_count] - array_x[array_last];
            array_last = array_count;
            array_first++;
          }
        }
        if (report_diff_diff)
        {
          fprintf(stdout, "X differences of differences\n");
          quicksort_for_ints(array_x, 0, array_first-1);
          for (array_last = 0, array_count = 1; array_count < array_first; array_count++)
          {
            if (array_x[array_last] != array_x[array_count])
            {
              fprintf(stdout, "  %10d : %10d\n", array_x[array_last], array_count - array_last);
              array_last = array_count;
            }
          }
        }
      }

      if (report_y)
      {
        if (report_diff) fprintf(stdout, "Y differences \n");
        for (count_lines = 0, array_first = 0, array_last = 0, array_count = 1; array_count < array_max; array_count++)
        {
          if (array_y[array_last] != array_y[array_count])
          {
            if (report_diff && (count_lines < report_lines)) { count_lines++; fprintf(stdout, " %10d : %10d   %g\n", array_y[array_last], array_count - array_last, lasreader->header.y_scale_factor*array_y[array_last]); }
            array_y[array_first] = array_y[array_count] - array_y[array_last]; 
            array_last = array_count;
            array_first++;
          }
        }
        if (report_diff_diff)
        {
          fprintf(stdout, "Y differences of differences\n");
          quicksort_for_ints(array_y, 0, array_first-1);
          for (array_last = 0, array_count = 1; array_count < array_first; array_count++)
          {
            if (array_y[array_last] != array_y[array_count])
            {
              fprintf(stdout, "  %10d : %10d\n", array_y[array_last], array_count - array_last);
              array_last = array_count;
            }
          }
        }
      }

      if (report_z)
      {
        if (report_diff) fprintf(stdout, "Z differences \n");
        for (count_lines = 0, array_first = 0, array_last = 0, array_count = 1; array_count < array_max; array_count++)
        {
          if (array_z[array_last] != array_z[array_count])
          {
            if (report_diff && (count_lines < report_lines)) { count_lines++; fprintf(stdout, " %10d : %10d   %g\n", array_z[array_last], array_count - array_last, lasreader->header.z_scale_factor*array_z[array_last]); }
            array_z[array_first] = array_z[array_count] - array_z[array_last]; 
            array_last = array_count;
            array_first++;
          }
        }
        if (report_diff_diff)
        {
          fprintf(stdout, "Z differences of differences\n");
          quicksort_for_ints(array_z, 0, array_first-1);
          for (array_last = 0, array_count = 1; array_count < array_first; array_count++)
          {
            if (array_z[array_last] != array_z[array_count])
            {
              fprintf(stdout, "  %10d : %10d\n", array_z[array_last], array_count - array_last);
              array_last = array_count;
            }
          }
        }
      }

      // then for GPS

      if (report_gps && lasreader->point.have_gps_time)
      {
        if (report_diff) fprintf(stdout, "GPS time differences \n");
        for (array_first = 0, array_last = 0, array_count = 1; array_count < array_max; array_count++)
        {
          if (array_gps[array_last] != array_gps[array_count])
          {
            if (report_diff) fprintf(stdout, "  %.10g : %10d\n", array_gps[array_last], array_count - array_last);
            array_gps[array_first] = array_gps[array_count] - array_gps[array_last]; 
            array_last = array_count;
            array_first++;
          }
        }
        if (report_diff_diff)
        {
          fprintf(stdout, "GPS time  differences of differences\n");
          quicksort_for_doubles(array_gps, 0, array_first-1);
          for (array_last = 0, array_count = 1; array_count < array_first; array_count++)
          {
            if (array_gps[array_last] != array_gps[array_count])
            {
              fprintf(stdout, "  %.10g : %10d\n", array_gps[array_last], array_count - array_last);
              array_last = array_count;
            }
          }
        }
      }

      // then for R & G & B

      if (report_rgb && lasreader->point.have_rgb)
      {
        if (report_diff) fprintf(stdout, "R differences \n");
        for (array_first = 0, array_last = 0, array_count = 1; array_count < array_max; array_count++)
        {
          if (array_r[array_last] != array_r[array_count])
          {
            if (report_diff) fprintf(stdout, "  %10d : %10d\n", array_r[array_last], array_count - array_last);
            array_r[array_first] = array_r[array_count] - array_r[array_last]; 
            array_last = array_count;
            array_first++;
          }
        }
        if (report_diff_diff)
        {
          fprintf(stdout, "R differences of differences\n");
          quicksort_for_shorts(array_r, 0, array_first-1);
          for (array_last = 0, array_count = 1; array_count < array_first; array_count++)
          {
            if (array_r[array_last] != array_r[array_count])
            {
              fprintf(stdout, "  %10d : %10d\n", array_r[array_last], array_count - array_last);
              array_last = array_count;
            }
          }
        }

        if (report_diff) fprintf(stdout, "G differences \n");
        for (array_first = 0, array_last = 0, array_count = 1; array_count < array_max; array_count++)
        {
          if (array_g[array_last] != array_g[array_count])
          {
            if (report_diff) fprintf(stdout, "  %10d : %10d\n", array_g[array_last], array_count - array_last);
            array_g[array_first] = array_g[array_count] - array_g[array_last]; 
            array_last = array_count;
            array_first++;
          }
        }
        if (report_diff_diff)
        {
          fprintf(stdout, "G differences of differences\n");
          quicksort_for_shorts(array_g, 0, array_first-1);
          for (array_last = 0, array_count = 1; array_count < array_first; array_count++)
          {
            if (array_g[array_last] != array_g[array_count])
            {
              fprintf(stdout, "  %10d : %10d\n", array_g[array_last], array_count - array_last);
              array_last = array_count;
            }
          }
        }

        if (report_diff) fprintf(stdout, "B differences \n");
        for (array_first = 0, array_last = 0, array_count = 1; array_count < array_max; array_count++)
        {
          if (array_b[array_last] != array_b[array_count])
          {
            if (report_diff) fprintf(stdout, "  %10d : %10d\n", array_b[array_last], array_count - array_last);
            array_b[array_first] = array_b[array_count] - array_b[array_last]; 
            array_last = array_count;
            array_first++;
          }
        }
        if (report_diff_diff)
        {
          fprintf(stdout, "B differences of differences\n");
          quicksort_for_shorts(array_b, 0, array_first-1);
          for (array_last = 0, array_count = 1; array_count < array_first; array_count++)
          {
            if (array_b[array_last] != array_b[array_count])
            {
              fprintf(stdout, "  %10d : %10d\n", array_b[array_last], array_count - array_last);
              array_last = array_count;
            }
          }
        }
      }
      if (array_x) delete [] array_x;
      if (array_y) delete [] array_y;
      if (array_z) delete [] array_z;
      if (array_gps) delete [] array_gps;
      if (array_r) delete [] array_r;
      if (array_g) delete [] array_g;
      if (array_b) delete [] array_b;
    }
    else
    {
      // check output

      fprintf(stdout, "new scale factors: %g %g %g\n", lasreader->header.x_scale_factor,  lasreader->header.y_scale_factor,  lasreader->header.z_scale_factor);

    // check output

      if (!laswriteopener.active())
      {
        // create name from input name
        laswriteopener.make_file_name(lasreadopener.get_file_name());
      }

      // prepare the header for the surviving points

      strncpy(lasreader->header.system_identifier, "LAStools (c) by rapidlasso GmbH", 32);
      lasreader->header.system_identifier[31] = '\0';
      char temp[64];
      sprintf(temp, "lasprecision (%d)", LAS_TOOLS_VERSION);
      strncpy(lasreader->header.generating_software, temp, 32);
      lasreader->header.generating_software[31] = '\0';

      if (projection_was_set)
      {
        lasreader->header.set_geo_keys(number_of_keys, (LASvlr_key_entry*)geo_keys);
        if (geo_double_params)
        {
          lasreader->header.set_geo_double_params(num_geo_double_params, geo_double_params);
        }
        else
        {
          lasreader->header.del_geo_double_params();
        }
        lasreader->header.del_geo_ascii_params();
      }

      // open laswriter

      LASwriter* laswriter = laswriteopener.open(&lasreader->header);
      if (laswriter == 0)
      {
        fprintf(stderr, "ERROR: could not open laswriter\n");
        usage(argc==1);
      }

      // loop over points
      while (lasreader->read_point())
      {
        laswriter->write_point(&lasreader->point);
        laswriter->update_inventory(&lasreader->point);
      }

      laswriter->update_header(&lasreader->header, TRUE);
      laswriter->close();
      delete laswriter;

      laswriteopener.set_file_name(0);
    }

    lasreader->close();
    delete lasreader;
  }

  if (projection_was_set)
  {
    free(geo_keys);
    if (geo_double_params)
    {
      free(geo_double_params);
    }
  }

  byebye(false, argc==1);

  return 0;
}
Beispiel #3
0
int main(int argc, char *argv[])
{
  int i;
#ifdef COMPILE_WITH_GUI
  bool gui = false;
#endif
#ifdef COMPILE_WITH_MULTI_CORE
  I32 cores = 1;
#endif
  bool verbose = false;
  bool projection_was_set = false;
  bool quiet = false;
  int file_creation_day = -1;
  int file_creation_year = -1;
  int set_version_major = -1;
  int set_version_minor = -1;
  int set_classification = -1;
  char* set_system_identifier = 0;
  char* set_generating_software = 0;
  bool set_ogc_wkt = false;
  double start_time = 0.0;

  LASreadOpener lasreadopener;
  GeoProjectionConverter geoprojectionconverter;
  LASwriteOpener laswriteopener;

  if (argc == 1)
  {
#ifdef COMPILE_WITH_GUI
    return txt2las_gui(argc, argv, 0);
#else
    char file_name[256];
    fprintf(stderr,"%s is better run in the command line\n", argv[0]);
    fprintf(stderr,"enter input file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    lasreadopener.set_file_name(file_name);
    fprintf(stderr,"enter output file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    laswriteopener.set_file_name(file_name);
#endif
  }
  else
  {
    // need to get those before lastransform->parse() routine gets them 
    for (i = 1; i < argc; i++)
    {
      if (argv[i][0] == '–') argv[i][0] = '-';
      if (strcmp(argv[i],"-scale_intensity") == 0)
      {
        if ((i+1) >= argc)
        {
          fprintf(stderr,"ERROR: '%s' needs 1 argument: factor\n", argv[i]);
          usage(true);
        }
        lasreadopener.set_scale_intensity((F32)atof(argv[i+1]));
        *argv[i]='\0'; *argv[i+1]='\0'; i+=1;
      }
      else if (strcmp(argv[i],"-translate_intensity") == 0)
      {
        if ((i+1) >= argc)
        {
          fprintf(stderr,"ERROR: '%s' needs 1 argument: offset\n", argv[i]);
          usage(true);
        }
        lasreadopener.set_translate_intensity((F32)atof(argv[i+1]));
        *argv[i]='\0'; *argv[i+1]='\0'; i+=1;
      }
      else if (strcmp(argv[i],"-translate_then_scale_intensity") == 0)
      {
        if ((i+2) >= argc)
        {
          fprintf(stderr,"ERROR: '%s' needs 2 arguments: offset factor\n", argv[i]);
          usage(true);
        }
        lasreadopener.set_translate_intensity((F32)atof(argv[i+1]));
        lasreadopener.set_scale_intensity((F32)atof(argv[i+2]));
        *argv[i]='\0'; *argv[i+1]='\0'; *argv[i+2]='\0'; i+=2;
      }
      else if (strcmp(argv[i],"-scale_scan_angle") == 0)
      {
        if ((i+1) >= argc)
        {
          fprintf(stderr,"ERROR: '%s' needs 1 argument: factor\n", argv[i]);
          usage(true);
        }
        lasreadopener.set_scale_scan_angle((F32)atof(argv[i+1]));
        *argv[i]='\0'; *argv[i+1]='\0'; i+=1;
      }
    }
    if (!lasreadopener.parse(argc, argv)) byebye(true);
    if (!geoprojectionconverter.parse(argc, argv)) byebye(true);
    if (!laswriteopener.parse(argc, argv)) byebye(true);
  }

  for (i = 1; i < argc; i++)
  {
    if (argv[i][0] == '\0')
    {
      continue;
    }
    else if (strcmp(argv[i],"-h") == 0 || strcmp(argv[i],"-help") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      usage();
    }
    else if (strcmp(argv[i],"-v") == 0 || strcmp(argv[i],"-verbose") == 0)
    {
      verbose = true;
    }
    else if (strcmp(argv[i],"-version") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      byebye();
    }
    else if (strcmp(argv[i],"-gui") == 0)
    {
#ifdef COMPILE_WITH_GUI
      gui = true;
#else
      fprintf(stderr, "WARNING: not compiled with GUI support. ignoring '-gui' ...\n");
#endif
    }
    else if (strcmp(argv[i],"-cores") == 0)
    {
#ifdef COMPILE_WITH_MULTI_CORE
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        usage(true);
      }
      argv[i][0] = '\0';
      i++;
      cores = atoi(argv[i]);
      argv[i][0] = '\0';
#else
      fprintf(stderr, "WARNING: not compiled with multi-core batching. ignoring '-cores' ...\n");
      i++;
#endif
    }
    else if (strcmp(argv[i],"-quiet") == 0)
    {
      quiet = true;
    }
    else if (strcmp(argv[i],"-parse") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: parse_string\n", argv[i]);
        usage(true);
      }
      i++;
      lasreadopener.set_parse_string(argv[i]);
    }
    else if (strcmp(argv[i],"-skip") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number_of_lines\n", argv[i]);
        usage(true);
      }
      i++;
      lasreadopener.set_skip_lines(atoi(argv[i]));
    }
    else if (strcmp(argv[i],"-set_scale") == 0)
    {
      if ((i+3) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 3 arguments: x y z\n", argv[i]);
        usage(true);
      }
      F64 scale_factor[3];
      i++;
      sscanf(argv[i], "%lf", &(scale_factor[0]));
      i++;
      sscanf(argv[i], "%lf", &(scale_factor[1]));
      i++;
      sscanf(argv[i], "%lf", &(scale_factor[2]));
      lasreadopener.set_scale_factor(scale_factor);
    }
    else if (strcmp(argv[i],"-set_offset") == 0)
    {
      if ((i+3) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 3 arguments: x y z\n", argv[i]);
        usage(true);
      }
      F64 offset[3];
      i++;
      sscanf(argv[i], "%lf", &(offset[0]));
      i++;
      sscanf(argv[i], "%lf", &(offset[1]));
      i++;
      sscanf(argv[i], "%lf", &(offset[2]));
      lasreadopener.set_offset(offset);
    }
    else if (strcmp(argv[i],"-add_extra") == 0 || strcmp(argv[i],"-add_attribute") == 0)
    {
      if ((i+3) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs at least 3 arguments: data_type name description\n", argv[i]);
        usage(true);
      }
      if (((i+4) < argc) && (atof(argv[i+4]) != 0.0))
      {
        if (((i+5) < argc) && ((atof(argv[i+5]) != 0.0) || (strcmp(argv[i+5], "0") == 0) || (strcmp(argv[i+5], "0.0") == 0)))
        {
          if (((i+6) < argc) && (atof(argv[i+6]) != 0.0))
          {
            if (((i+7) < argc) && ((atof(argv[i+7]) != 0.0) || (strcmp(argv[i+7], "0") == 0) || (strcmp(argv[i+7], "0.0") == 0)))
            {
              lasreadopener.add_attribute(atoi(argv[i+1]), argv[i+2], argv[i+3], atof(argv[i+4]), atof(argv[i+5]), atof(argv[i+6]), atof(argv[i+7]));
              i+=7;
            }
            else
            { 
              lasreadopener.add_attribute(atoi(argv[i+1]), argv[i+2], argv[i+3], atof(argv[i+4]), atof(argv[i+5]), atof(argv[i+6]));
              i+=6;
            }
          }
          else
          { 
            lasreadopener.add_attribute(atoi(argv[i+1]), argv[i+2], argv[i+3], atof(argv[i+4]), atof(argv[i+5]));
            i+=5;
          }
        }
        else
        {
          lasreadopener.add_attribute(atoi(argv[i+1]), argv[i+2], argv[i+3], atof(argv[i+4]));
          i+=4;
        }
      }
      else
      {
        lasreadopener.add_attribute(atoi(argv[i+1]), argv[i+2], argv[i+3]);
        i+=3;
      }
    }
    else if (strcmp(argv[i],"-set_creation_date") == 0 || strcmp(argv[i],"-set_file_creation") == 0)
    {
      if ((i+2) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 2 arguments: day year\n", argv[i]);
        usage(true);
      }
      i++;
      sscanf(argv[i], "%d", &file_creation_day);
      i++;
      sscanf(argv[i], "%d", &file_creation_year);
    }
    else if (strcmp(argv[i],"-set_class") == 0 || strcmp(argv[i],"-set_classification") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: value\n", argv[i]);
        usage(true);
      }
      i++;
      set_classification = atoi(argv[i]);
    }
    else if (strcmp(argv[i],"-set_system_identifier") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: name\n", argv[i]);
        usage(true);
      }
      i++;
      set_system_identifier = argv[i];
    }
    else if (strcmp(argv[i],"-set_generating_software") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: name\n", argv[i]);
        usage(true);
      }
      i++;
      set_generating_software = argv[i];
    }
    else if (strcmp(argv[i],"-set_ogc_wkt") == 0)
    {
      set_ogc_wkt = true;
    }
    else if (strcmp(argv[i],"-set_version") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: major.minor\n", argv[i]);
        usage(true);
      }
      i++;
      if (sscanf(argv[i],"%d.%d",&set_version_major,&set_version_minor) != 2)
      {
        fprintf(stderr, "ERROR: cannot understand argument '%s' of '%s'\n", argv[i], argv[i-1]);
        usage(true);
      }
    }
    else if ((argv[i][0] != '-') && (lasreadopener.get_file_name_number() == 0))
    {
      lasreadopener.add_file_name(argv[i]);
      argv[i][0] = '\0';
    }
    else
    {
      fprintf(stderr, "ERROR: cannot understand argument '%s'\n", argv[i]);
      usage(true);
    }
  }

#ifdef COMPILE_WITH_GUI
  if (gui)
  {
    return txt2las_gui(argc, argv, &lasreadopener);
  }
#endif

#ifdef COMPILE_WITH_MULTI_CORE
  if (cores > 1)
  {
    if (lasreadopener.get_file_name_number() < 2)
    {
      fprintf(stderr,"WARNING: only %u input files. ignoring '-cores %d' ...\n", lasreadopener.get_file_name_number(), cores);
    }
    else if (lasreadopener.is_merged())
    {
      fprintf(stderr,"WARNING: input files merged on-the-fly. ignoring '-cores %d' ...\n", cores);
    }
    else
    {
      return txt2las_multi_core(argc, argv, &geoprojectionconverter, &lasreadopener, &laswriteopener, cores);
    }
  }
#endif

  // make sure we have input

  if (!lasreadopener.active())
  {
    fprintf(stderr, "ERROR: no input specified\n");
    byebye(true, argc==1);
  }

  // make sure that input and output are not *both* piped

  if (lasreadopener.is_piped() && laswriteopener.is_piped())
  {
    fprintf(stderr, "ERROR: input and output cannot both be piped\n");
    byebye(true, argc==1);
  }

  // check if projection info was set in the command line

  int number_of_keys;
  GeoProjectionGeoKeys* geo_keys = 0;
  int num_geo_double_params;
  double* geo_double_params = 0;

  if (geoprojectionconverter.has_projection())
  {
    projection_was_set = geoprojectionconverter.get_geo_keys_from_projection(number_of_keys, &geo_keys, num_geo_double_params, &geo_double_params);
  }

  // loop over multiple input files

  while (lasreadopener.active())
  {
    if (verbose) start_time = taketime();

    // open lasreader

    LASreader* lasreader = lasreadopener.open();

    if (lasreader == 0)
    {
      fprintf(stderr, "ERROR: could not open lasreader\n");
      byebye(true, argc==1);
    }

    // check output

    if (!laswriteopener.active())
    {
      // create name from input name
      laswriteopener.make_file_name(lasreadopener.get_file_name(), -2);
    }

    // if the output was piped we need to precompute the bounding box, etc ...

    if (laswriteopener.is_piped())
    {
      // because the output goes to a pipe we have to precompute the header
      // information with an additional pass.

      if (verbose) { fprintf(stderr, "piped output. extra read pass over file '%s' ...\n", lasreadopener.get_file_name()); }

      while (lasreader->read_point());
      lasreader->close();

      // output some stats
    
      if (verbose)
      {
#ifdef _WIN32
        fprintf(stderr, "npoints %I64d min %g %g %g max %g %g %g\n", lasreader->npoints, lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z);
#else
        fprintf(stderr, "npoints %lld min %g %g %g max %g %g %g\n", lasreader->npoints, lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z);
#endif
        fprintf(stderr, "return histogram %d %d %d %d %d\n", lasreader->header.number_of_points_by_return[0], lasreader->header.number_of_points_by_return[1], lasreader->header.number_of_points_by_return[2], lasreader->header.number_of_points_by_return[3], lasreader->header.number_of_points_by_return[4]);
        fprintf(stderr,"took %g sec.\n", taketime()-start_time); start_time = taketime();
      }

      // reopen lasreader for the second pass

      if (!lasreadopener.reopen(lasreader))
      {
        fprintf(stderr, "ERROR: could not reopen '%s' for main pass\n", lasreadopener.get_file_name());
        byebye(true, argc==1);
      }
    }

    // populate header

    for (i = 0; i < 32; i++)
    {
      lasreader->header.system_identifier[i] = '\0';
      lasreader->header.generating_software[i] = '\0';
    }

    if (set_system_identifier)
    {
      strncpy(lasreader->header.system_identifier, set_system_identifier, 32);
      lasreader->header.system_identifier[31] = '\0';
    }
    else
    {
      strncpy(lasreader->header.system_identifier, "LAStools (c) by rapidlasso GmbH", 32);
      lasreader->header.system_identifier[31] = '\0';
    }

    if (set_generating_software)
    {
      strncpy(lasreader->header.generating_software, set_generating_software, 32);
      lasreader->header.generating_software[31] = '\0';
    }
    else
    {
      char temp[64];
      sprintf(temp, "txt2las (version %d)", LAS_TOOLS_VERSION);
      strncpy(lasreader->header.generating_software, temp, 32);
      lasreader->header.generating_software[31] = '\0';
    }

    // maybe set creation date

#ifdef _WIN32
    if (lasreadopener.get_file_name() && file_creation_day == -1 && file_creation_year == -1)
    {
      WIN32_FILE_ATTRIBUTE_DATA attr;
	    SYSTEMTIME creation;
      GetFileAttributesEx(lasreadopener.get_file_name(), GetFileExInfoStandard, &attr);
	    FileTimeToSystemTime(&attr.ftCreationTime, &creation);
      int startday[13] = {-1, 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334};
      file_creation_day = startday[creation.wMonth] + creation.wDay;
      file_creation_year = creation.wYear;
      // leap year handling
      if ((((creation.wYear)%4) == 0) && (creation.wMonth > 2)) file_creation_day++;
    }
#endif
    if (file_creation_day == -1 && file_creation_year == -1)
    {
      lasreader->header.file_creation_day = (U16)333;
      lasreader->header.file_creation_year = (U16)2011;
    }
    else
    {
      lasreader->header.file_creation_day = (U16)file_creation_day;
      lasreader->header.file_creation_year = (U16)file_creation_year;
    }

    // maybe set version

    if (set_version_major != -1) lasreader->header.version_major = (U8)set_version_major;
    if (set_version_minor != -1) lasreader->header.version_minor = (U8)set_version_minor;

    if (set_version_minor == 3)
    {
      lasreader->header.header_size = 235;
      lasreader->header.offset_to_point_data = 235;
    }
    else if (set_version_minor == 4)
    {
      lasreader->header.header_size = 375;
      lasreader->header.offset_to_point_data = 375;
    }

    // maybe set projection

    if (projection_was_set)
    {
      lasreader->header.set_geo_keys(number_of_keys, (LASvlr_key_entry*)geo_keys);
      if (geo_double_params)
      {
        lasreader->header.set_geo_double_params(num_geo_double_params, geo_double_params);
      }
      else
      {
        lasreader->header.del_geo_double_params();
      }
      lasreader->header.del_geo_ascii_params();

      if (set_ogc_wkt) // maybe also set the OCG WKT 
      {
        I32 len = 0;
        CHAR* ogc_wkt = 0;
        if (geoprojectionconverter.get_ogc_wkt_from_projection(len, &ogc_wkt, !geoprojectionconverter.has_projection(false)))
        {
          lasreader->header.set_geo_wkt_ogc_cs(len, ogc_wkt);
          free(ogc_wkt);
          if ((lasreader->header.version_minor >= 4) && (lasreader->header.point_data_format >= 6))
          {
            lasreader->header.set_global_encoding_bit(LAS_TOOLS_GLOBAL_ENCODING_BIT_OGC_WKT_CRS);
          }
        }
        else
        {
          fprintf(stderr, "WARNING: cannot produce OCG WKT. ignoring '-set_ogc_wkt' for '%s'\n", lasreadopener.get_file_name());
        }
      }
    }

    // open the output

    LASwriter* laswriter = laswriteopener.open(&lasreader->header);

    if (laswriter == 0)
    {
      fprintf(stderr, "ERROR: could not open laswriter\n");
      byebye(true, argc==1);
    }

    if (verbose) fprintf(stderr, "reading file '%s' and writing to '%s'\n", lasreadopener.get_file_name(), laswriteopener.get_file_name());

    // loop over points

    while (lasreader->read_point())
    {
      // maybe set classification
      if (set_classification != -1)
      {
        lasreader->point.set_classification(set_classification);
      }
      // write the point
      laswriter->write_point(&lasreader->point);
    }
    lasreader->close();

    if (!laswriteopener.is_piped())
    {
      laswriter->update_header(&lasreader->header, FALSE, TRUE);
      if (verbose)
      {
#ifdef _WIN32
        fprintf(stderr, "npoints %I64d min %g %g %g max %g %g %g\n", lasreader->npoints, lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z);
#else
        fprintf(stderr, "npoints %lld min %g %g %g max %g %g %g\n", lasreader->npoints, lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z);
#endif
        fprintf(stderr, "return histogram %d %d %d %d %d\n", lasreader->header.number_of_points_by_return[0], lasreader->header.number_of_points_by_return[1], lasreader->header.number_of_points_by_return[2], lasreader->header.number_of_points_by_return[3], lasreader->header.number_of_points_by_return[4]);
     }
    }
    laswriter->close();

    delete laswriter;
    delete lasreader;

    laswriteopener.set_file_name(0);

    if (verbose) fprintf(stderr,"took %g sec.\n", taketime()-start_time);
  }

  byebye(false, argc==1);

  return 0;
}
Beispiel #4
0
int main(int argc, char *argv[])
{
  MPI_Init(&argc, &argv);
  int i;
#ifdef COMPILE_WITH_GUI
  bool gui = false;
#endif
  bool verbose = false;
  bool keep_lastiling = false;
  U32 chopchop = 0;
  bool projection_was_set = false;
  double start_time = 0;

  LASreadOpener lasreadopener;
  GeoProjectionConverter geoprojectionconverter;
  LASwriteOpener laswriteopener;

  if (argc == 1)
  {
#ifdef COMPILE_WITH_GUI
    return lasmerge_gui(argc, argv, 0);
#else
    fprintf(stderr,"%s is better run in the command line\n", argv[0]);
    char file_name[256];
    fprintf(stderr,"enter input file 1: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    lasreadopener.add_file_name(file_name);
    fprintf(stderr,"enter input file 2: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    lasreadopener.add_file_name(file_name);
    fprintf(stderr,"enter output file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    laswriteopener.set_file_name(file_name);
#endif
  }
  else
  {
    for (i = 1; i < argc; i++)
    {
      if (argv[i][0] == '�') argv[i][0] = '-';
    }


    if (!geoprojectionconverter.parse(argc, argv)) byebye(true);
    if (!lasreadopener.parse(argc, argv)) byebye(true);
    if (lasreadopener.get_file_name_number()<2)
    {
      fprintf(stderr,"Must specify more than one input file.\n");
      byebye(true); // only support merging more than one file
    }
    if (!laswriteopener.parse(argc, argv)) byebye(true);
  }

  for (i = 1; i < argc; i++)
  {
    if (argv[i][0] == '\0')
    {
      continue;
    }
    else if (strcmp(argv[i],"-h") == 0 || strcmp(argv[i],"-help") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      usage();
    }
    else if (strcmp(argv[i],"-v") == 0 || strcmp(argv[i],"-verbose") == 0)
    {
      verbose = true;
    }
    else if (strcmp(argv[i],"-version") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      byebye();
    }
    else if (strcmp(argv[i],"-gui") == 0)
    {
#ifdef COMPILE_WITH_GUI
      gui = true;
#else
      fprintf(stderr, "WARNING: not compiled with GUI support. ignoring '-gui' ...\n");
#endif
    }
    else if (strcmp(argv[i],"-split") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: size\n", argv[i]);
        byebye(true);
      }
      i++;
      chopchop = atoi(argv[i]);
    }
    else if (strcmp(argv[i],"-keep_lastiling") == 0)
    {
      keep_lastiling = true;
    }
    else if ((argv[i][0] != '-') && (lasreadopener.get_file_name_number() == 0))
    {
      lasreadopener.add_file_name(argv[i]);
      argv[i][0] = '\0';
    }
    else
    {
      fprintf(stderr, "ERROR: cannot understand argument '%s'\n", argv[i]);
      byebye(true);
    }
  }

#ifdef COMPILE_WITH_GUI
  if (gui)
  {
    return lasmerge_gui(argc, argv, &lasreadopener);
  }
#endif

  // read all the input files merged

  lasreadopener.set_merged(TRUE);

  // maybe we want to keep the lastiling 

  if (keep_lastiling)
  {
    lasreadopener.set_keep_lastiling(TRUE);
  }

  // we need to precompute the bounding box

  lasreadopener.set_populate_header(TRUE);

  // check input and output

  if (!lasreadopener.active())
  {
    fprintf(stderr, "ERROR: no input specified\n");
    byebye(true, argc==1);
  }

  if (!laswriteopener.active())
  {
    fprintf(stderr, "ERROR: no output specified\n");
    byebye(true, argc==1);
  }

  // make sure we do not corrupt the input file

  if (lasreadopener.get_file_name() && laswriteopener.get_file_name() && (strcmp(lasreadopener.get_file_name(), laswriteopener.get_file_name()) == 0))
  {
    fprintf(stderr, "ERROR: input and output file name are identical\n");
    usage(true);
  }

  // check if projection info was set in the command line

  int number_of_keys;
  GeoProjectionGeoKeys* geo_keys = 0;
  int num_geo_double_params;
  double* geo_double_params = 0;

  if (geoprojectionconverter.has_projection())
  {
    projection_was_set = geoprojectionconverter.get_geo_keys_from_projection(number_of_keys, &geo_keys, num_geo_double_params, &geo_double_params);
  }

  if (verbose) start_time = taketime();

  LASreader* lasreader = lasreadopener.open();
  lasreader->populate_rank_points();
  LASreaderMerged *lasreadermerged = (LASreaderMerged *)lasreader;
  I32 process_count = lasreadermerged->get_process_count();

  dbg(3, "rank %i, lasreadermerged->npoints %lli", lasreadermerged->get_rank(), lasreadermerged->npoints);
  for (i=0; i<process_count; i++)
  {
    dbg(3, "rank %i, rank_begin_point %lli", lasreadermerged->get_rank(), lasreadermerged->get_rank_begin_index()[i]);
    for(int j=lasreadermerged->get_file_name_start(); j< lasreadermerged->get_file_name_number(); j++)
    {
      dbg(3, "rank %i, number %i name %s count %lli, begin", lasreadermerged->get_rank(), j, lasreadermerged->get_file_names()[j], lasreadermerged->get_file_point_counts()[j]);
    }


  }
  dbg(3,"type of reader returned: class %s and declared name %s", typeid(*lasreader).name(), quote(*lasreader));


  if (lasreader == 0)
  {
    fprintf(stderr, "ERROR: could not open lasreader\n");
    byebye(true, argc==1);
  }

#ifdef _WIN32
  if (verbose) { fprintf(stderr,"merging headers took %g sec. there are %I64d points in total.\n", taketime()-start_time, lasreader->npoints); start_time = taketime(); }
#else
  if (verbose) { fprintf(stderr,"merging headers took %g sec. there are %lld points in total.\n", taketime()-start_time, lasreader->npoints); start_time = taketime(); }
#endif

  // prepare the header for the surviving points

  strncpy(lasreader->header.system_identifier, "LAStools (c) by rapidlasso GmbH", 32);
  lasreader->header.system_identifier[31] = '\0';
  char temp[64];
  sprintf(temp, "lasmerge (version %d)", LAS_TOOLS_VERSION);
  strncpy(lasreader->header.generating_software, temp, 32);
  lasreader->header.generating_software[31] = '\0';

  if (projection_was_set)
  {
    lasreader->header.set_geo_keys(number_of_keys, (LASvlr_key_entry*)geo_keys);
    free(geo_keys);
    if (geo_double_params)
    {
      lasreader->header.set_geo_double_params(num_geo_double_params, geo_double_params);
      free(geo_double_params);
    }
    else
    {
      lasreader->header.del_geo_double_params();
    }
    lasreader->header.del_geo_ascii_params();
  }

  if (chopchop)
  {
    I32 file_number = 0;
    LASwriter* laswriter = 0;
    // loop over the points
    while (lasreader->read_point())
    {
      if (laswriter == 0)
      {
        // open the next writer
        laswriteopener.make_file_name(0, file_number);
        file_number++;
        laswriter = laswriteopener.open(&lasreader->header);
      }
      laswriter->write_point(&lasreader->point);
      laswriter->update_inventory(&lasreader->point);
      if (laswriter->p_count == chopchop)
      {
        // close the current writer
        laswriter->update_header(&lasreader->header, TRUE);
        laswriter->close();
        if (verbose) { fprintf(stderr,"splitting file '%s' took %g sec.\n", laswriteopener.get_file_name(), taketime()-start_time); start_time = taketime(); }
        delete laswriter;
        laswriter = 0;
      }
    }
    if (laswriter && laswriter->p_count)
    {
      // close the current writer
      laswriter->update_header(&lasreader->header, TRUE);
      laswriter->close();
      if (verbose) { fprintf(stderr,"splitting file '%s' took %g sec.\n", laswriteopener.get_file_name(), taketime()-start_time); start_time = taketime(); }
      delete laswriter;
      laswriter = 0;
    }
  }
  else
  {
    // wait for all processes to open their input files
    MPI_Barrier(MPI_COMM_WORLD);

    // all processes open a writer
    LASwriter* laswriter = laswriteopener.open (&lasreader->header);

    // set the write file pointer... no filter support, assumes all input file's points are written to output file
    //ByteStreamOutFileLE *bs = (ByteStreamOutFileLE*) laswriter->get_stream ();  <-- this is the ByteStreamOut type for las files
    ByteStreamOut *bs = laswriter->get_stream ();

    I64 begin_index = (lasreadermerged->get_rank_begin_index())[lasreadermerged->get_rank ()];

    bs->seek (lasreader->header.point_data_record_length * begin_index + lasreader->header.offset_to_point_data);

    if (laswriter == 0)
    {
      fprintf (stderr, "ERROR: could not open laswriter\n");
      byebye (true, argc == 1);
    }

    // wait for all processes to open the output file and set their write file pointers.
    MPI_Barrier(MPI_COMM_WORLD);
    // loop over the points
    while (lasreader->read_point())
    {
      laswriter->write_point(&lasreader->point);
      laswriter->update_inventory(&lasreader->point);
    }

    int rank = lasreadermerged->get_rank();
    if(rank!=0)
    {
      laswriter->close(FALSE);
    }

    MPI_Barrier(MPI_COMM_WORLD); // not needed since reduce causes barrier, used for testing
    // this whole MPI_Reduce section is not technically needed since we don't yet support point filtering,
    // It was implemented now to ensure that it will work when point filtering of input files is supported
    MPI_Reduce(&(laswriter->inventory.extended_number_of_point_records), &extended_number_of_point_records, 1,
               MPI_LONG_LONG_INT,  MPI_SUM, 0, MPI_COMM_WORLD);
    int i;
    for(i=0; i<16; i++)
    {
      MPI_Reduce(&(laswriter->inventory.extended_number_of_points_by_return[i]), &extended_number_of_points_by_return[i], 1,
                     MPI_LONG_LONG_INT,  MPI_SUM, 0, MPI_COMM_WORLD);
    }
    MPI_Reduce(&(laswriter->inventory.max_X), &max_X, 1, MPI_INT,  MPI_MAX, 0, MPI_COMM_WORLD);
    MPI_Reduce(&(laswriter->inventory.min_X), &min_X, 1, MPI_INT,  MPI_MIN, 0, MPI_COMM_WORLD);
    MPI_Reduce(&(laswriter->inventory.max_Y), &max_Y, 1, MPI_INT,  MPI_MAX, 0, MPI_COMM_WORLD);
    MPI_Reduce(&(laswriter->inventory.min_Y), &min_Y, 1, MPI_INT,  MPI_MIN, 0, MPI_COMM_WORLD);
    MPI_Reduce(&(laswriter->inventory.max_Z), &max_Z, 1, MPI_INT,  MPI_MAX, 0, MPI_COMM_WORLD);
    MPI_Reduce(&(laswriter->inventory.min_Z), &min_Z, 1, MPI_INT,  MPI_MIN, 0, MPI_COMM_WORLD);

    if(rank==0)
    {
      dbg(3, "extended_number_of_point_records %lli", extended_number_of_point_records);
      laswriter->inventory.extended_number_of_point_records = extended_number_of_point_records;
      for(i=0; i<16; i++)
      {
        laswriter->inventory.extended_number_of_points_by_return[i] = extended_number_of_points_by_return[i];
      }
      laswriter->inventory.max_X = max_X;
      laswriter->inventory.min_X = min_X;
      laswriter->inventory.max_Y = max_Y;
      laswriter->inventory.min_Y = min_Y;
      laswriter->inventory.max_Z = max_Z;
      laswriter->inventory.min_Z = min_Z;
    }

    dbg(3, "rank %i, point data record length %i", lasreadermerged->get_rank(), lasreader->header.point_data_record_length);

    // close the writer
    if(rank==0)
    {
      // update header should only be called with TRUE when using the MPI_Reduce calls above,
      // lasreadopener.open(), called above, generates a correct header for the output file, provided no points are filtered during the read
      laswriter->update_header(&lasreader->header, TRUE);
      laswriter->close(FALSE);
    }

    if (verbose) fprintf(stderr,"merging files took %g sec.\n", taketime()-start_time); 
    delete laswriter;
  }
  MPI_Finalize();
  lasreader->close();
  delete lasreader;

  byebye(false, argc==1);

  return 0;
}
Beispiel #5
0
int main(int argc, char *argv[])
{
  int i;
  bool dry = false;
#ifdef COMPILE_WITH_GUI
  bool gui = false;
#endif
#ifdef COMPILE_WITH_MULTI_CORE
  I32 cores = 1;
#endif
  bool verbose = false;
  bool waveform = false;
  bool waveform_with_map = false;
  bool report_file_size = false;
  I32 end_of_points = -1;
  bool projection_was_set = false;
  bool lax = false;
  U32 tile_size = 100;
  U32 threshold = 1000;
  U32 minimum_points = 100000;
  I32 maximum_intervals = -20;
  double start_time = 0.0;

  LASreadOpener lasreadopener;
  GeoProjectionConverter geoprojectionconverter;
  LASwriteOpener laswriteopener;

  if (argc == 1)
  {
#ifdef COMPILE_WITH_GUI
    return laszip_gui(argc, argv, 0);
#else
    fprintf(stderr,"laszip.exe is better run in the command line or via the lastool.exe GUI\n");
    char file_name[256];
    fprintf(stderr,"enter input file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    lasreadopener.set_file_name(file_name);
    fprintf(stderr,"enter output file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    laswriteopener.set_file_name(file_name);
#endif
  }
  else
  {
    for (i = 1; i < argc; i++)
    {
      if (argv[i][0] == '–') argv[i][0] = '-';
    }
    if (!geoprojectionconverter.parse(argc, argv)) byebye(true);
    if (!lasreadopener.parse(argc, argv)) byebye(true);
    if (!laswriteopener.parse(argc, argv)) byebye(true);
  }

  for (i = 1; i < argc; i++)
  {
    if (argv[i][0] == '\0')
    {
      continue;
    }
    else if (strcmp(argv[i],"-h") == 0 || strcmp(argv[i],"-help") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      usage();
    }
    else if (strcmp(argv[i],"-v") == 0 || strcmp(argv[i],"-verbose") == 0)
    {
      verbose = true;
    }
    else if (strcmp(argv[i],"-version") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      byebye();
    }
    else if (strcmp(argv[i],"-gui") == 0)
    {
#ifdef COMPILE_WITH_GUI
      gui = true;
#else
      fprintf(stderr, "WARNING: not compiled with GUI support. ignoring '-gui' ...\n");
#endif
    }
    else if (strcmp(argv[i],"-cores") == 0)
    {
#ifdef COMPILE_WITH_MULTI_CORE
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        usage(true);
      }
      argv[i][0] = '\0';
      i++;
      cores = atoi(argv[i]);
      argv[i][0] = '\0';
#else
      fprintf(stderr, "WARNING: not compiled with multi-core batching. ignoring '-cores' ...\n");
#endif
    }
    else if (strcmp(argv[i],"-dry") == 0)
    {
      dry = true;
    }
    else if (strcmp(argv[i],"-lax") == 0)
    {
      lax = true;
    }
    else if (strcmp(argv[i],"-eop") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: char\n", argv[i]);
        usage(true);
      }
      i++;
      end_of_points = atoi(argv[i]);
      if ((end_of_points < 0) || (end_of_points > 255))
      {
        fprintf(stderr,"ERROR: end of points value needs to be between 0 and 255\n");
        usage(true);
      }
    }
    else if (strcmp(argv[i],"-tile_size") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: size\n", argv[i]);
        usage(true);
      }
      i++;
      tile_size = atoi(argv[i]);
    }
    else if (strcmp(argv[i],"-maximum") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        usage(true);
      }
      i++;
      maximum_intervals = atoi(argv[i]);
    }
    else if (strcmp(argv[i],"-minimum") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        usage(true);
      }
      i++;
      minimum_points = atoi(argv[i]);
    }
    else if (strcmp(argv[i],"-threshold") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: value\n", argv[i]);
        usage(true);
      }
      i++;
      threshold = atoi(argv[i]);
    }
    else if (strcmp(argv[i],"-size") == 0)
    {
      report_file_size = true;
    }
    else if (strcmp(argv[i],"-waveform") == 0 || strcmp(argv[i],"-waveforms") == 0)
    {
      waveform = true;
    }
    else if (strcmp(argv[i],"-waveform_with_map") == 0 || strcmp(argv[i],"-waveforms_with_map") == 0)
    {
      waveform = true;
      waveform_with_map = true;
    }
    else if ((argv[i][0] != '-') && (lasreadopener.get_file_name_number() == 0))
    {
      lasreadopener.add_file_name(argv[i]);
      argv[i][0] = '\0';
    }
    else
    {
      fprintf(stderr, "ERROR: cannot understand argument '%s'\n", argv[i]);
      usage(true);
    }
  }

#ifdef COMPILE_WITH_GUI
  if (gui)
  {
    return laszip_gui(argc, argv, &lasreadopener);
  }
#endif

#ifdef COMPILE_WITH_MULTI_CORE
  if ((cores > 1) && (lasreadopener.get_file_name_number() > 1) && (!lasreadopener.get_merged()))
  {
    return laszip_multi_core(argc, argv, &geoprojectionconverter, &lasreadopener, &laswriteopener, cores);
  }
#endif

  // check input

  if (!lasreadopener.active())
  {
    fprintf(stderr,"ERROR: no input specified\n");
    usage(true, argc==1);
  }

  // make sure we do not corrupt the input file

  if (lasreadopener.get_file_name() && laswriteopener.get_file_name() && (strcmp(lasreadopener.get_file_name(), laswriteopener.get_file_name()) == 0))
  {
    fprintf(stderr, "ERROR: input and output file name are identical\n");
    usage(true);
  }

  // check if projection info was set in the command line

  int number_of_keys;
  GeoProjectionGeoKeys* geo_keys = 0;
  int num_geo_double_params;
  double* geo_double_params = 0;

  if (geoprojectionconverter.has_projection())
  {
    projection_was_set = geoprojectionconverter.get_geo_keys_from_projection(number_of_keys, &geo_keys, num_geo_double_params, &geo_double_params);
  }

  // loop over multiple input files

  while (lasreadopener.active())
  {
    if (verbose) start_time = taketime();

    // open lasreader

    LASreader* lasreader = lasreadopener.open();

    if (lasreader == 0)
    {
      fprintf(stderr, "ERROR: could not open lasreader\n");
      usage(true, argc==1);
    }

    // switch

    if (report_file_size)
    {
      // maybe only report uncompressed file size
      I64 uncompressed_file_size = (I64)lasreader->header.number_of_point_records * (I64)lasreader->header.point_data_record_length + lasreader->header.offset_to_point_data;
      if (uncompressed_file_size == (I64)((U32)uncompressed_file_size))
        fprintf(stderr,"uncompressed file size is %u bytes or %.2f MB for '%s'\n", (U32)uncompressed_file_size, (F64)uncompressed_file_size/1024.0/1024.0, lasreadopener.get_file_name());
      else
        fprintf(stderr,"uncompressed file size is %.2f MB or %.2f GB for '%s'\n", (F64)uncompressed_file_size/1024.0/1024.0, (F64)uncompressed_file_size/1024.0/1024.0/1024.0, lasreadopener.get_file_name());
    }
    else if (dry)
    {
      // maybe only a dry read pass
      start_time = taketime();
      while (lasreader->read_point());
      fprintf(stderr,"needed %g secs to read '%s'\n", taketime()-start_time, lasreadopener.get_file_name());
    }
    else
    {
      I64 start_of_waveform_data_packet_record = 0;

      // create output file name if no output was specified 
      if (!laswriteopener.active())
      {
        if (lasreadopener.get_file_name() == 0)
        {
          fprintf(stderr,"ERROR: no output specified\n");
          usage(true, argc==1);
        }
        laswriteopener.set_force(TRUE);
        laswriteopener.make_file_name(lasreadopener.get_file_name(), -2);
        if (!laswriteopener.format_was_specified())
        {
          char* file_name_out = strdup(laswriteopener.get_file_name());
          int len = strlen(file_name_out);
          if (lasreader->get_format() == LAS_TOOLS_FORMAT_LAZ)
          {
            file_name_out[len-3] = 'l';
            file_name_out[len-2] = 'a';
            file_name_out[len-1] = 's';
          }
          else 
          {
            file_name_out[len-3] = 'l';
            file_name_out[len-2] = 'a';
            file_name_out[len-1] = 'z';
          }
          laswriteopener.set_file_name(file_name_out);
          free(file_name_out);
        }
      }

      // maybe set projection

      if (projection_was_set)
      {
        lasreader->header.set_geo_keys(number_of_keys, (LASvlr_key_entry*)geo_keys);
        if (geo_double_params)
        {
          lasreader->header.set_geo_double_params(num_geo_double_params, geo_double_params);
        }
        else
        {
          lasreader->header.del_geo_double_params();
        }
        lasreader->header.del_geo_ascii_params();
      }

      // almost never open laswaveform13reader and laswaveform13writer (-:

      LASwaveform13reader* laswaveform13reader = 0;
      LASwaveform13writer* laswaveform13writer = 0;

      if (waveform)
      {
        laswaveform13reader = lasreadopener.open_waveform13(&lasreader->header);
        if (laswaveform13reader)
        {
          // switch compression on/off
          U8 compression_type = (laswriteopener.get_format() == LAS_TOOLS_FORMAT_LAZ ? 1 : 0);
          for (i = 0; i < 255; i++) if (lasreader->header.vlr_wave_packet_descr[i]) lasreader->header.vlr_wave_packet_descr[i]->setCompressionType(compression_type);
          // create laswaveform13writer
          laswaveform13writer = laswriteopener.open_waveform13(&lasreader->header);
          if (laswaveform13writer == 0)
          {
            delete [] laswaveform13reader;
            laswaveform13reader = 0;
            waveform = 0;
            // switch compression on/off back
            U8 compression_type = (laswriteopener.get_format() == LAS_TOOLS_FORMAT_LAZ ? 0 : 1);
            for (i = 0; i < 255; i++) if (lasreader->header.vlr_wave_packet_descr[i]) lasreader->header.vlr_wave_packet_descr[i]->setCompressionType(compression_type);
          }
        }
        else
        {
          waveform = false;
        }
      }

      // special check for LAS 1.3+ files that contain waveform data

      if ((lasreader->header.version_major == 1) && (lasreader->header.version_minor >= 3))
      {
        if (lasreader->header.global_encoding & 2) // if bit # 1 is set we have internal waveform data
        {
          lasreader->header.global_encoding &= ~((U16)2); // remove internal bit
          if (lasreader->header.start_of_waveform_data_packet_record) // offset to 
          {
            start_of_waveform_data_packet_record = lasreader->header.start_of_waveform_data_packet_record;
            lasreader->header.start_of_waveform_data_packet_record = 0;
            lasreader->header.global_encoding |= ((U16)4); // set external bit
          }
        }
      }

      // open laswriter

      LASwriter* laswriter = laswriteopener.open(&lasreader->header);

      if (laswriter == 0)
      {
        fprintf(stderr, "ERROR: could not open laswriter\n");
        usage(true, argc==1);
      }

      // should we also deal with waveform data

      if (waveform)
      {
        U8 compression_type = (laswaveform13reader->is_compressed() ? 1 : 0);
        for (i = 0; i < 255; i++) if (lasreader->header.vlr_wave_packet_descr[i]) lasreader->header.vlr_wave_packet_descr[i]->setCompressionType(compression_type);

        U64 last_offset = 0;
        U32 last_size = 60;
        U64 new_offset = 0;
        U32 new_size = 0;
        U32 waves_written = 0;
        U32 waves_referenced = 0;

        my_offset_size_map offset_size_map;

        LASindex lasindex;
        if (lax) // should we also create a spatial indexing file
        {
          // setup the quadtree
          LASquadtree* lasquadtree = new LASquadtree;
          lasquadtree->setup(lasreader->header.min_x, lasreader->header.max_x, lasreader->header.min_y, lasreader->header.max_y, tile_size);

          // create lax index
          lasindex.prepare(lasquadtree, threshold);
        }

        // loop over points

        while (lasreader->read_point())
        {
          if (lasreader->point.wavepacket.getIndex()) // if point is attached to a waveform
          {
            waves_referenced++;
            if (lasreader->point.wavepacket.getOffset() == last_offset)
            {
              lasreader->point.wavepacket.setOffset(new_offset);
              lasreader->point.wavepacket.setSize(new_size);
            }
            else if (lasreader->point.wavepacket.getOffset() > last_offset)
            {
              if (lasreader->point.wavepacket.getOffset() > (last_offset + last_size))
              {
                if (!waveform_with_map)
                {
                  fprintf(stderr,"WARNING: gap in waveform offsets.\n");
#ifdef _WIN32
                  fprintf(stderr,"WARNING: last offset plus size was %I64d but new offset is %I64d (for point %I64d)\n", (last_offset + last_size), lasreader->point.wavepacket.getOffset(), lasreader->p_count);
#else
                  fprintf(stderr,"WARNING: last offset plus size was %lld but new offset is %lld (for point %lld)\n", (last_offset + last_size), lasreader->point.wavepacket.getOffset(), lasreader->p_count);
#endif
                }
              }
              waves_written++;
              last_offset = lasreader->point.wavepacket.getOffset();
              last_size = lasreader->point.wavepacket.getSize();
              laswaveform13reader->read_waveform(&lasreader->point);
              laswaveform13writer->write_waveform(&lasreader->point, laswaveform13reader->samples);
              new_offset = lasreader->point.wavepacket.getOffset();
              new_size = lasreader->point.wavepacket.getSize();
              if (waveform_with_map)
              {
                offset_size_map.insert(my_offset_size_map::value_type(last_offset, OffsetSize(new_offset,new_size)));
              }
            }
            else
            {
              if (waveform_with_map)
              {
                my_offset_size_map::iterator map_element;
                map_element = offset_size_map.find(lasreader->point.wavepacket.getOffset());
                if (map_element == offset_size_map.end())
                {
                  waves_written++;
                  last_offset = lasreader->point.wavepacket.getOffset();
                  last_size = lasreader->point.wavepacket.getSize();
                  laswaveform13reader->read_waveform(&lasreader->point);
                  laswaveform13writer->write_waveform(&lasreader->point, laswaveform13reader->samples);
                  new_offset = lasreader->point.wavepacket.getOffset();
                  new_size = lasreader->point.wavepacket.getSize();
                  offset_size_map.insert(my_offset_size_map::value_type(last_offset, OffsetSize(new_offset,new_size)));
                }
                else
                {
                  lasreader->point.wavepacket.setOffset((*map_element).second.offset);
                  lasreader->point.wavepacket.setSize((*map_element).second.size);
                }
              }
              else
              {
                fprintf(stderr,"ERROR: waveform offsets not in monotonically increasing order.\n");
#ifdef _WIN32
                fprintf(stderr,"ERROR: last offset was %I64d but new offset is %I64d (for point %I64d)\n", last_offset, lasreader->point.wavepacket.getOffset(), lasreader->p_count);
#else
                fprintf(stderr,"ERROR: last offset was %lld but new offset is %lld (for point %lld)\n", last_offset, lasreader->point.wavepacket.getOffset(), lasreader->p_count);
#endif
                fprintf(stderr,"ERROR: use option '-waveforms_with_map' to compress.\n");
                byebye(true, argc==1);
              }
            }
          }
          laswriter->write_point(&lasreader->point);
          if (lax)
          {
            lasindex.add(&lasreader->point, (U32)(laswriter->p_count));
          }
          if (!lasreadopener.has_populated_header())
          {
            laswriter->update_inventory(&lasreader->point);
          }
        }

        if (verbose && ((laswriter->p_count % 1000000) == 0)) fprintf(stderr,"written %d referenced %d of %d points\n", waves_written, waves_referenced, (I32)laswriter->p_count);

        if (!lasreadopener.has_populated_header())
        {
          laswriter->update_header(&lasreader->header, TRUE);
        }

        if (lax)
        {
          // adaptive coarsening
          lasindex.complete(minimum_points, maximum_intervals);

          // write lax to file
          lasindex.write(laswriteopener.get_file_name());
        }
      }
      else
      {
        // loop over points

        if (lasreadopener.has_populated_header())
        {
          if (lax) // should we also create a spatial indexing file
          {
            // setup the quadtree
            LASquadtree* lasquadtree = new LASquadtree;
            lasquadtree->setup(lasreader->header.min_x, lasreader->header.max_x, lasreader->header.min_y, lasreader->header.max_y, tile_size);

            // create lax index
            LASindex lasindex;
            lasindex.prepare(lasquadtree, threshold);
  
            // compress points and add to index
            while (lasreader->read_point())
            {
              lasindex.add(&lasreader->point, (U32)(laswriter->p_count));
              laswriter->write_point(&lasreader->point);
            }

            // adaptive coarsening
            lasindex.complete(minimum_points, maximum_intervals);

            // write lax to file
            lasindex.write(laswriteopener.get_file_name());
          }
          else
          {
            if (end_of_points > -1)
            {
              U8 point10[20];
              memset(point10, end_of_points, 20);

              if (verbose) fprintf(stderr, "writing with end_of_points value %d\n", end_of_points);

              while (lasreader->read_point())
              {
                if (memcmp(point10, &lasreader->point, 20) == 0)
                {
                  break;
                }
                laswriter->write_point(&lasreader->point);
                laswriter->update_inventory(&lasreader->point);
              }
              laswriter->update_header(&lasreader->header, TRUE);
            }
            else
            {
              while (lasreader->read_point())
              {
                laswriter->write_point(&lasreader->point);
              }
            }
          }
        }
        else
        {
          if (lax && (lasreader->header.min_x < lasreader->header.max_x) && (lasreader->header.min_y < lasreader->header.max_y))
          {
            // setup the quadtree
            LASquadtree* lasquadtree = new LASquadtree;
            lasquadtree->setup(lasreader->header.min_x, lasreader->header.max_x, lasreader->header.min_y, lasreader->header.max_y, tile_size);

            // create lax index
            LASindex lasindex;
            lasindex.prepare(lasquadtree, threshold);
  
            // compress points and add to index
            while (lasreader->read_point())
            {
              lasindex.add(&lasreader->point, (U32)(laswriter->p_count));
              laswriter->write_point(&lasreader->point);
              laswriter->update_inventory(&lasreader->point);
            }

            // adaptive coarsening
            lasindex.complete(minimum_points, maximum_intervals);

            // write lax to file
            lasindex.write(laswriteopener.get_file_name());
          }
          else
          {
            if (end_of_points > -1)
            {
              U8 point10[20];
              memset(point10, end_of_points, 20);

              if (verbose) fprintf(stderr, "writing with end_of_points value %d\n", end_of_points);

              while (lasreader->read_point())
              {
                if (memcmp(point10, &lasreader->point, 20) == 0)
                {
                  break;
                }
                laswriter->write_point(&lasreader->point);
                laswriter->update_inventory(&lasreader->point);
              }
            }
            else
            {
              while (lasreader->read_point())
              {
                laswriter->write_point(&lasreader->point);
                laswriter->update_inventory(&lasreader->point);
              }
            }
          }
          laswriter->update_header(&lasreader->header, TRUE);
        }
      }

      I64 total_bytes = laswriter->close();
      delete laswriter;
  
#ifdef _WIN32
      if (verbose) fprintf(stderr,"%g secs to write %I64d bytes for '%s' with %I64d points of type %d\n", taketime()-start_time, total_bytes, laswriteopener.get_file_name(), lasreader->p_count, lasreader->header.point_data_format);
#else
      if (verbose) fprintf(stderr,"%g secs to write %lld bytes for '%s' with %lld points of type %d\n", taketime()-start_time, total_bytes, laswriteopener.get_file_name(), lasreader->p_count, lasreader->header.point_data_format);
#endif

      if (start_of_waveform_data_packet_record && !waveform)
      {
        lasreader->close(FALSE);
        ByteStreamIn* stream = lasreader->get_stream();
        stream->seek(start_of_waveform_data_packet_record);
        char* wave_form_file_name;
        if (laswriteopener.get_file_name())
        {
          wave_form_file_name = strdup(laswriteopener.get_file_name());
          int len = strlen(wave_form_file_name);
          if (wave_form_file_name[len-3] == 'L')
          {
            wave_form_file_name[len-3] = 'W';
            wave_form_file_name[len-2] = 'D';
            wave_form_file_name[len-1] = 'P';
          }
          else
          {
            wave_form_file_name[len-3] = 'w';
            wave_form_file_name[len-2] = 'd';
            wave_form_file_name[len-1] = 'p';
          }
        }
        else
        {
          wave_form_file_name = strdup("wave_form.wdp");
        }
        FILE* file = fopen(wave_form_file_name, "wb");
        if (file)
        {
          if (verbose) fprintf(stderr,"writing waveforms to '%s'\n", wave_form_file_name);
          try
          {
            int byte;
            while (true)
            {
              byte = stream->getByte();
              fputc(byte, file);
            }
          }
          catch (...)
          {
            fclose(file);
          }
        }
      }

      laswriteopener.set_file_name(0);
    }
  
    lasreader->close();

    delete lasreader;
  }

  if (projection_was_set)
  {
    free(geo_keys);
    if (geo_double_params)
    {
      free(geo_double_params);
    }
  }

  byebye(false, argc==1);

  return 0;
}
Beispiel #6
0
int main(int argc, char *argv[])
{
  int i;
  int is_mpi = 1;
  int debug = 0;
  bool verbose = false;
  bool force = false;
  // fixed header changes 
  int set_version_major = -1;
  int set_version_minor = -1;
  int set_point_data_format = -1;
  int set_point_data_record_length = -1;
  int set_gps_time_endcoding = -1;
  // variable header changes
  bool remove_extra_header = false;
  bool remove_all_variable_length_records = false;
  int remove_variable_length_record = -1;
  int remove_variable_length_record_from = -1;
  int remove_variable_length_record_to = -1;
  bool remove_tiling_vlr = false;
  bool remove_original_vlr = false;
  // extract a subsequence
  //unsigned int subsequence_start = 0;
  //unsigned int subsequence_stop = U32_MAX;
  I64 subsequence_start = 0;
  I64 subsequence_stop = I64_MAX;


  // fix files with corrupt points
  bool clip_to_bounding_box = false;
  double start_time = 0;
  time_t wall_start_time;
  time_t wall_end_time;
  LASreadOpener lasreadopener;
  //if(is_mpi)lasreadopener.setIsMpi(TRUE);
  GeoProjectionConverter geoprojectionconverter;
  LASwriteOpener laswriteopener;
  if(is_mpi)laswriteopener.setIsMpi(TRUE);


  int process_count = 1;
  int rank = 0;
  start_time = taketime();
  time(&wall_start_time);

  if (is_mpi){
      MPI_Init(&argc,&argv);
      MPI_Comm_size(MPI_COMM_WORLD,&process_count);
      MPI_Comm_rank(MPI_COMM_WORLD,&rank);
      if(debug) printf ("MPI task %d has started...\n", rank);
  }



  if (argc == 1)
  {

    fprintf(stderr,"las2las.exe is better run in the command line or via the lastool.exe GUI\n");
    char file_name[256];
    fprintf(stderr,"enter input file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    lasreadopener.set_file_name(file_name);
    fprintf(stderr,"enter output file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    laswriteopener.set_file_name(file_name);

  }
  else
  {
    for (i = 1; i < argc; i++)
    {
      //if (argv[i][0] == '�') argv[i][0] = '-';
      if (strcmp(argv[i],"-week_to_adjusted") == 0)
      {
        set_gps_time_endcoding = 1;
      }
      else if (strcmp(argv[i],"-adjusted_to_week") == 0)
      {
        set_gps_time_endcoding = 0;
      }
    }
    if (!geoprojectionconverter.parse(argc, argv)) byebye(true);
    if (!lasreadopener.parse(argc, argv)) byebye(true);
    if (!laswriteopener.parse(argc, argv)) byebye(true);
  }

  for (i = 1; i < argc; i++)
  {
    if (argv[i][0] == '\0')
    {
      continue;
    }
    else if (strcmp(argv[i],"-h") == 0 || strcmp(argv[i],"-help") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      usage();
    }
    else if (strcmp(argv[i],"-v") == 0 || strcmp(argv[i],"-verbose") == 0)
    {
      verbose = true;
    }
    else if (strcmp(argv[i],"-version") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      byebye();
    }
    else if (strcmp(argv[i],"-gui") == 0)
    {

      fprintf(stderr, "WARNING: not compiled with GUI support. ignoring '-gui' ...\n");

    }
    else if (strcmp(argv[i],"-cores") == 0)
    {

      fprintf(stderr, "WARNING: not compiled with multi-core batching. ignoring '-cores' ...\n");
      i++;

    }
    else if (strcmp(argv[i],"-force") == 0)
    {
      force = true;
    }
    else if (strcmp(argv[i],"-subseq") == 0)
    {
      if ((i+2) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 2 arguments: start stop\n", argv[i]);
        byebye(true);
      }
      subsequence_start = (unsigned int)atoi(argv[i+1]); subsequence_stop = (unsigned int)atoi(argv[i+2]);
      i+=2;
    }
    else if (strcmp(argv[i],"-start_at_point") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: start\n", argv[i]);
        byebye(true);
      }
      subsequence_start = (unsigned int)atoi(argv[i+1]);
      i+=1;
    }
    else if (strcmp(argv[i],"-stop_at_point") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: stop\n", argv[i]);
        byebye(true);
      }
      subsequence_stop = (unsigned int)atoi(argv[i+1]);
      i+=1;
    }
    else if (strcmp(argv[i],"-set_version") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: major.minor\n", argv[i]);
        byebye(true);
      }
      if (sscanf(argv[i+1],"%d.%d",&set_version_major,&set_version_minor) != 2)
      {
        fprintf(stderr, "ERROR: cannot understand argument '%s' for '%s'\n", argv[i+1], argv[i]);
        usage(true);
      }
      i+=1;
    }
    else if (strcmp(argv[i],"-set_version_major") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: major\n", argv[i]);
        byebye(true);
      }
      set_version_major = atoi(argv[i+1]);
      i+=1;
    }
    else if (strcmp(argv[i],"-set_version_minor") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: minor\n", argv[i]);
        byebye(true);
      }
      set_version_minor = atoi(argv[i+1]);
      i+=1;
    }
    else if (strcmp(argv[i],"-remove_extra") == 0)
    {
      remove_extra_header = true;
    }
    else if (strcmp(argv[i],"-remove_all_vlrs") == 0)
    {
      remove_all_variable_length_records = true;
    }
    else if (strcmp(argv[i],"-remove_vlr") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        byebye(true);
      }
      remove_variable_length_record = atoi(argv[i+1]);
      remove_variable_length_record_from = -1;
      remove_variable_length_record_to = -1;
      i++;
    }
    else if (strcmp(argv[i],"-remove_vlrs_from_to") == 0)
    {
      if ((i+2) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 2 arguments: start end\n", argv[i]);
        byebye(true);
      }
      remove_variable_length_record = -1;
      remove_variable_length_record_from = atoi(argv[i+1]);
      remove_variable_length_record_to = atoi(argv[i+2]);
      i+=2;
    }
    else if (strcmp(argv[i],"-remove_tiling_vlr") == 0)
    {
      remove_tiling_vlr = true;
      i++;
    }
    else if (strcmp(argv[i],"-remove_original_vlr") == 0)
    {
      remove_original_vlr = true;
      i++;
    }
    else if (strcmp(argv[i],"-set_point_type") == 0 || strcmp(argv[i],"-set_point_data_format") == 0 || strcmp(argv[i],"-point_type") == 0) 
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: type\n", argv[i]);
        byebye(true);
      }
      set_point_data_format = atoi(argv[i+1]);
      i++;
    }
    else if (strcmp(argv[i],"-set_point_data_record_length") == 0 || strcmp(argv[i],"-set_point_size") == 0 || strcmp(argv[i],"-point_size") == 0) 
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: size\n", argv[i]);
        byebye(true);
      }
      set_point_data_record_length = atoi(argv[i+1]);
      i++;
    }
    else if (strcmp(argv[i],"-clip_to_bounding_box") == 0 || strcmp(argv[i],"-clip_to_bb") == 0) 
    {
      clip_to_bounding_box = true;
    }
    else if ((argv[i][0] != '-') && (lasreadopener.get_file_name_number() == 0))
    {
      lasreadopener.add_file_name(argv[i]);
      argv[i][0] = '\0';
    }
    else
    {
      fprintf(stderr, "ERROR: cannot understand argument '%s'\n", argv[i]);
      usage(true);
    }
  }



  // check input

  if (!lasreadopener.active())
  {
    fprintf(stderr,"ERROR: no input specified\n");
    usage(true, argc==1);
  }
  
  BOOL extra_pass = laswriteopener.is_piped();

  // for piped output we need an extra pass

  if (extra_pass)
  {
    if (lasreadopener.is_piped())
    {
      fprintf(stderr, "ERROR: input and output cannot both be piped\n");
      usage(true);
    }
  }

  // make sure we do not corrupt the input file

  if (lasreadopener.get_file_name() && laswriteopener.get_file_name() && (strcmp(lasreadopener.get_file_name(), laswriteopener.get_file_name()) == 0))
  {
    fprintf(stderr, "ERROR: input and output file name are identical\n");
    usage(true);
  }
    
  // possibly loop over multiple input files

  while (lasreadopener.active())
  {
   // if (verbose) start_time = taketime();

    // open lasreader

    LASreader* lasreader = lasreadopener.open();

    if (lasreader == 0)
    {
      fprintf(stderr, "ERROR: could not open lasreader\n");
      usage(true, argc==1);
    }

    // store the inventory for the header

    LASinventory lasinventory;

    // the point we write sometimes needs to be copied

    LASpoint* point = 0;

    // prepare the header for output

    if (set_gps_time_endcoding != -1)
    {
      if (set_gps_time_endcoding == 0)
      {
        if ((lasreader->header.global_encoding & 1) == 0)
        {
          fprintf(stderr, "WARNING: global encoding indicates file already in GPS week time\n");
          if (force)
          {
            fprintf(stderr, "         forced conversion.\n");
          }
          else
          {
            fprintf(stderr, "         use '-force' to force conversion.\n");
            byebye(true);
          }
        }
        else
        {
          lasreader->header.global_encoding &= ~1;
        }
      }
      else if (set_gps_time_endcoding == 1)
      {
        if ((lasreader->header.global_encoding & 1) == 1)
        {
          fprintf(stderr, "WARNING: global encoding indicates file already in Adjusted Standard GPS time\n");
          if (force)
          {
            fprintf(stderr, "         forced conversion.\n");
          }
          else
          {
            fprintf(stderr, "         use '-force' to force conversion.\n");
            byebye(true);
          }
        }
        else
        {
          lasreader->header.global_encoding |= 1;
        }
      }
    }

    if (set_version_major != -1)
    {
      if (set_version_major != 1)
      {
        fprintf(stderr, "ERROR: unknown version_major %d\n", set_version_major);
        byebye(true);
      }
      lasreader->header.version_major = (U8)set_version_major;
    }

    if (set_version_minor >= 0)
    {
      if (set_version_minor > 4)
      {
        fprintf(stderr, "ERROR: unknown version_minor %d\n", set_version_minor);
        byebye(true);
      }
      if (set_version_minor < 3)
      {
        if (lasreader->header.version_minor == 3)
        {
          lasreader->header.header_size -= 8;
          lasreader->header.offset_to_point_data -= 8;
        }
        else if (lasreader->header.version_minor >= 4)
        {
          lasreader->header.header_size -= (8 + 140);
          lasreader->header.offset_to_point_data -= (8 + 140);
        }
      }
      else if (set_version_minor == 3)
      {
        if (lasreader->header.version_minor < 3)
        {
          lasreader->header.header_size += 8;
          lasreader->header.offset_to_point_data += 8;
          lasreader->header.start_of_waveform_data_packet_record = 0;
        }
        else if (lasreader->header.version_minor >= 4)
        {
          lasreader->header.header_size -= 140;
          lasreader->header.offset_to_point_data -= 140;
        }
      }
      else if (set_version_minor == 4) 
      {
        if (lasreader->header.version_minor < 3)
        {
          lasreader->header.header_size += (8 + 140);
          lasreader->header.offset_to_point_data += (8 + 140);
          lasreader->header.start_of_waveform_data_packet_record = 0;
        }
        else if (lasreader->header.version_minor == 3)
        {
          lasreader->header.header_size += 140;
          lasreader->header.offset_to_point_data += 140;
        }
      }

      if ((set_version_minor <= 3) && (lasreader->header.version_minor >= 4))
      {
        if (lasreader->header.point_data_format > 5)
        {
          switch (lasreader->header.point_data_format)
          {
          case 6:
            fprintf(stderr, "WARNING: downgrading point_data_format from %d to 1\n", lasreader->header.point_data_format);
            lasreader->header.point_data_format = 1;
            fprintf(stderr, "         and point_data_record_length from %d to %d\n", lasreader->header.point_data_record_length, lasreader->header.point_data_record_length - 2);
            lasreader->header.point_data_record_length -= 2;
            break;
          case 7:
            fprintf(stderr, "WARNING: downgrading point_data_format from %d to 3\n", lasreader->header.point_data_format);
            lasreader->header.point_data_format = 3;
            fprintf(stderr, "         and point_data_record_length from %d to %d\n", lasreader->header.point_data_record_length, lasreader->header.point_data_record_length - 2);
            lasreader->header.point_data_record_length -= 2;
            break;
          case 8:
            fprintf(stderr, "WARNING: downgrading point_data_format from %d to 3\n", lasreader->header.point_data_format);
            lasreader->header.point_data_format = 3;
            fprintf(stderr, "         and point_data_record_length from %d to %d\n", lasreader->header.point_data_record_length, lasreader->header.point_data_record_length - 4);
            lasreader->header.point_data_record_length -= 4;
            break;
          case 9:
            fprintf(stderr, "WARNING: downgrading point_data_format from %d to 4\n", lasreader->header.point_data_format);
            lasreader->header.point_data_format = 4;
            fprintf(stderr, "         and point_data_record_length from %d to %d\n", lasreader->header.point_data_record_length, lasreader->header.point_data_record_length - 2);
            lasreader->header.point_data_record_length -= 2;
            break;
          case 10:
            fprintf(stderr, "WARNING: downgrading point_data_format from %d to 5\n", lasreader->header.point_data_format);
            lasreader->header.point_data_format = 5;
            fprintf(stderr, "         and point_data_record_length from %d to %d\n", lasreader->header.point_data_record_length, lasreader->header.point_data_record_length - 4);
            lasreader->header.point_data_record_length -= 4;
            break;
          default:
            fprintf(stderr, "ERROR: unknown point_data_format %d\n", lasreader->header.point_data_format);
            byebye(true);
          }
        }
        point = new LASpoint;
        point->init(&lasreader->header, lasreader->header.point_data_format, lasreader->header.point_data_record_length);
      }

      lasreader->header.version_minor = (U8)set_version_minor;
    }

    // are we supposed to change the point data format

    if (set_point_data_format != -1)
    {
      if (set_point_data_format < 0 || set_point_data_format > 10)
      {
        fprintf(stderr, "ERROR: unknown point_data_format %d\n", set_point_data_format);
        byebye(true);
      }
      // depending on the conversion we may need to copy the point
      if (convert_point_type_from_to[lasreader->header.point_data_format][set_point_data_format])
      {
        if (point == 0) point = new LASpoint;
      }
      lasreader->header.point_data_format = (U8)set_point_data_format;
      lasreader->header.clean_laszip();
      switch (lasreader->header.point_data_format)
      {
      case 0:
        lasreader->header.point_data_record_length = 20;
        break;
      case 1:
        lasreader->header.point_data_record_length = 28;
        break;
      case 2:
        lasreader->header.point_data_record_length = 26;
        break;
      case 3:
        lasreader->header.point_data_record_length = 34;
        break;
      case 4:
        lasreader->header.point_data_record_length = 57;
        break;
      case 5:
        lasreader->header.point_data_record_length = 63;
        break;
      case 6:
        lasreader->header.point_data_record_length = 30;
        break;
      case 7:
        lasreader->header.point_data_record_length = 36;
        break;
      case 8:
        lasreader->header.point_data_record_length = 38;
        break;
      case 9:
        lasreader->header.point_data_record_length = 59;
        break;
      case 10:
        lasreader->header.point_data_record_length = 67;
        break;
      }
    }

    // are we supposed to change the point data record length

    if (set_point_data_record_length != -1)
    {
      I32 num_extra_bytes = 0;
      switch (lasreader->header.point_data_format)
      {
      case 0:
        num_extra_bytes = set_point_data_record_length - 20;
        break;
      case 1:
        num_extra_bytes = set_point_data_record_length - 28;
        break;
      case 2:
        num_extra_bytes = set_point_data_record_length - 26;
        break;
      case 3:
        num_extra_bytes = set_point_data_record_length - 34;
        break;
      case 4:
        num_extra_bytes = set_point_data_record_length - 57;
        break;
      case 5:
        num_extra_bytes = set_point_data_record_length - 63;
        break;
      case 6:
        num_extra_bytes = set_point_data_record_length - 30;
        break;
      case 7:
        num_extra_bytes = set_point_data_record_length - 36;
        break;
      case 8:
        num_extra_bytes = set_point_data_record_length - 38;
        break;
      case 9:
        num_extra_bytes = set_point_data_record_length - 59;
        break;
      case 10:
        num_extra_bytes = set_point_data_record_length - 67;
        break;
      }
      if (num_extra_bytes < 0)
      {
        fprintf(stderr, "ERROR: point_data_format %d needs record length of at least %d\n", lasreader->header.point_data_format, set_point_data_record_length - num_extra_bytes);
        byebye(true);
      }
      if (lasreader->header.point_data_record_length < set_point_data_record_length)
      {
        if (!point) point = new LASpoint;
      }
      lasreader->header.point_data_record_length = (U16)set_point_data_record_length;
      lasreader->header.clean_laszip();
    }

    // if the point needs to be copied set up the data fields

    if (point)
    {
      point->init(&lasreader->header, lasreader->header.point_data_format, lasreader->header.point_data_record_length);
    }

    // maybe we should remove some stuff

    if (remove_extra_header)
    {
      lasreader->header.clean_user_data_in_header();
      lasreader->header.clean_user_data_after_header();
    }

    if (remove_all_variable_length_records)
    {
      lasreader->header.clean_vlrs();
    }
    else
    {
      if (remove_variable_length_record != -1)
      {
        lasreader->header.remove_vlr(remove_variable_length_record);
      }
    
      if (remove_variable_length_record_from != -1)
      {
        for (i = remove_variable_length_record_to; i >= remove_variable_length_record_from; i--)
        {
          lasreader->header.remove_vlr(i);
        }
      }
    }

    if (remove_tiling_vlr)
    {
      lasreader->header.clean_lastiling();
    }

    if (remove_original_vlr)
    {
      lasreader->header.clean_lasoriginal();
    }

    // maybe we should add / change the projection information
    LASquantizer* reproject_quantizer = 0;
    LASquantizer* saved_quantizer = 0;
    if (geoprojectionconverter.has_projection(true) || geoprojectionconverter.has_projection(false))
    {
      if (!geoprojectionconverter.has_projection(true) && lasreader->header.vlr_geo_keys)
      {
        geoprojectionconverter.set_projection_from_geo_keys(lasreader->header.vlr_geo_keys[0].number_of_keys, (GeoProjectionGeoKeys*)lasreader->header.vlr_geo_key_entries, lasreader->header.vlr_geo_ascii_params, lasreader->header.vlr_geo_double_params);
      }

      if (geoprojectionconverter.has_projection(true) && geoprojectionconverter.has_projection(false))
      {
        reproject_quantizer = new LASquantizer();
        double point[3];
        point[0] = (lasreader->header.min_x+lasreader->header.max_x)/2;
        point[1] = (lasreader->header.min_y+lasreader->header.max_y)/2;
        point[2] = (lasreader->header.min_z+lasreader->header.max_z)/2;
        geoprojectionconverter.to_target(point);
        reproject_quantizer->x_scale_factor = geoprojectionconverter.get_target_precision();
        reproject_quantizer->y_scale_factor = geoprojectionconverter.get_target_precision();
        reproject_quantizer->z_scale_factor = lasreader->header.z_scale_factor;
        reproject_quantizer->x_offset = ((I64)((point[0]/reproject_quantizer->x_scale_factor)/10000000))*10000000*reproject_quantizer->x_scale_factor;
        reproject_quantizer->y_offset = ((I64)((point[1]/reproject_quantizer->y_scale_factor)/10000000))*10000000*reproject_quantizer->y_scale_factor;
        reproject_quantizer->z_offset = ((I64)((point[2]/reproject_quantizer->z_scale_factor)/10000000))*10000000*reproject_quantizer->z_scale_factor;
      }

      int number_of_keys;
      GeoProjectionGeoKeys* geo_keys = 0;
      int num_geo_double_params;
      double* geo_double_params = 0;

      if (geoprojectionconverter.get_geo_keys_from_projection(number_of_keys, &geo_keys, num_geo_double_params, &geo_double_params, !geoprojectionconverter.has_projection(false)))
      {
        lasreader->header.set_geo_keys(number_of_keys, (LASvlr_key_entry*)geo_keys);
        free(geo_keys);
        if (geo_double_params)
        {
          lasreader->header.set_geo_double_params(num_geo_double_params, geo_double_params);
          free(geo_double_params);
        }
        else
        {
          lasreader->header.del_geo_double_params();
        }
        lasreader->header.del_geo_ascii_params();
      }
    }

    // do we need an extra pass

    BOOL extra_pass = laswriteopener.is_piped();

    // for piped output we need an extra pass

    if (extra_pass)
    {
      if (lasreadopener.is_piped())
      {
        fprintf(stderr, "ERROR: input and output cannot both be piped\n");
        usage(true);
      }


      if (verbose) fprintf(stderr, "extra pass for piped output: reading %lld points ...\n", lasreader->npoints);


      // maybe seek to start position

      if (subsequence_start) lasreader->seek(subsequence_start);

      while (lasreader->read_point())

      {
        if (lasreader->p_count > subsequence_stop) break;

        if (clip_to_bounding_box)
        {
          if (!lasreader->point.inside_box(lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z))
          {
            continue;
          }
        }

        if (reproject_quantizer)
        {
          lasreader->point.compute_coordinates();
          geoprojectionconverter.to_target(lasreader->point.coordinates);
          lasreader->point.compute_XYZ(reproject_quantizer);
        }
        lasinventory.add(&lasreader->point);
      }
      lasreader->close();

      lasreader->header.number_of_point_records = lasinventory.number_of_point_records;
      for (i = 0; i < 5; i++) lasreader->header.number_of_points_by_return[i] = lasinventory.number_of_points_by_return[i+1];
      if (reproject_quantizer) lasreader->header = *reproject_quantizer;
      lasreader->header.max_x = lasreader->header.get_x(lasinventory.max_X);
      lasreader->header.min_x = lasreader->header.get_x(lasinventory.min_X);
      lasreader->header.max_y = lasreader->header.get_y(lasinventory.max_Y);
      lasreader->header.min_y = lasreader->header.get_y(lasinventory.min_Y);
      lasreader->header.max_z = lasreader->header.get_z(lasinventory.max_Z);
      lasreader->header.min_z = lasreader->header.get_z(lasinventory.min_Z);

     // if (verbose) { fprintf(stderr,"extra pass took %g sec.\n", taketime()-start_time); start_time = taketime(); }

      if (verbose) fprintf(stderr, "piped output: reading %lld and writing %d points ...\n", lasreader->npoints, lasinventory.number_of_point_records);

    }
    else
    {
      if (reproject_quantizer)
      {
        saved_quantizer = new LASquantizer();
        *saved_quantizer = lasreader->header;
        lasreader->header = *reproject_quantizer;
      }

      //if (verbose) fprintf(stderr, "reading %lld and writing all surviving points ...\n", lasreader->npoints);

    }

    // check output

    if (!laswriteopener.active())
    {
      // create name from input name
      laswriteopener.make_file_name(lasreadopener.get_file_name());
    }

    // prepare the header for the surviving points

    strncpy(lasreader->header.system_identifier, "LAStools (c) by rapidlasso GmbH", 32);
    lasreader->header.system_identifier[31] = '\0';
    char temp[64];
    sprintf(temp, "las2las (version %d)", LAS_TOOLS_VERSION);
    strncpy(lasreader->header.generating_software, temp, 32);
    lasreader->header.generating_software[31] = '\0';


    LASwriter* laswriter = 0;
    // open laswriter
    if(is_mpi){
	// remove any existing out file, before opening with MPI_File_open
	if(rank==0){
	    remove(laswriteopener.get_file_name());
	}
	MPI_Barrier(MPI_COMM_WORLD);
    }


    laswriter = laswriteopener.open(&lasreader->header);
    if (laswriter == 0)
    {
         fprintf(stderr, "ERROR: could not open laswriter\n");
         byebye(true, argc==1);
    }
    // **************************************************************************************************
    if(is_mpi == 1){ // jdw, we do this because only rank 0 now writes the header in laswriter_las.cpp
      MPI_File fh = laswriter->get_MPI_File();
      MPI_Offset offset;
      //MPI_File_get_position(fh, &offset);
      //printf ("offset %lld, rank %i fh %lld\n", offset, rank, fh);
      if(rank==0){
           MPI_File_get_position(fh, &offset);
      }
      MPI_Bcast(&offset, 1, MPI_OFFSET, 0, MPI_COMM_WORLD);
      MPI_Barrier(MPI_COMM_WORLD);
      MPI_File_seek(fh, offset, MPI_SEEK_SET);

    }
    // ****************************************************************************************************



    // for piped output we need to re-open the input file

    if (extra_pass)
    {
      if (!lasreadopener.reopen(lasreader))
      {
        fprintf(stderr, "ERROR: could not re-open lasreader\n");
        byebye(true);
      }
    }
    else
    {
      if (reproject_quantizer)
      {
        lasreader->header = *saved_quantizer;
        delete saved_quantizer;
      }
    }

    // maybe seek to start position

    if (subsequence_start) lasreader->seek(subsequence_start);

    // loop over points

    if (point)
    {

      while (lasreader->read_point())

      {
        if (lasreader->p_count > subsequence_stop) break;

        if (clip_to_bounding_box)
        {
          if (!lasreader->point.inside_box(lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z))
          {
            continue;
          }
        }

        if (reproject_quantizer)
        {
          lasreader->point.compute_coordinates();
          geoprojectionconverter.to_target(lasreader->point.coordinates);
          lasreader->point.compute_XYZ(reproject_quantizer);
        }
        *point = lasreader->point;
        laswriter->write_point(point);
        // without extra pass we need inventory of surviving points
        if (!extra_pass) laswriter->update_inventory(point);
      }
      delete point;
      point = 0;
    }
    else // ***************************** MPI ********************************************************
    {
      // ***** Determine the start and stop points for this process *****
      I64 left_over_count = lasreader->npoints % process_count;
      I64 process_points = lasreader->npoints / process_count;
      subsequence_start = rank*process_points;
      subsequence_stop =  subsequence_start + process_points;
      if(rank == process_count-1) subsequence_stop += left_over_count;

      // ***** Set the input stream file offset for this process *****
      // subsequence_start parameter gets cast to U32 in the implementation of seek and overflows for large files
      // manually set the file offset instead for now
      //((LASreaderLAS*)lasreader)->stream->seek(subsequence_start);
      I64 header_end_read_position = lasreader->get_Stream()->tell();


      //printf("header end %lld subseqence_start * 28 %lld rank %i\n", header_end_read_position, subsequence_start*28, rank);
      lasreader->p_count = subsequence_start;
      lasreader->get_Stream()->seek(header_end_read_position + subsequence_start*28);
      //printf("seek pos first loop %lld rank %i\n", lasreader->get_Stream()->tell(), rank);


      if (verbose) fprintf(stderr, "reading %lli points, rank %i\n", subsequence_stop - subsequence_start, rank);

      // *****Read the file for the first time *****
      // this first read and filter of the file is to gather a count of points that pass the filter so that
      // write offsets can be set.
      I64 filtered_count = 0;
      //while (lasreader->read_point()){

      lasreader->MPI_END_POINT = subsequence_stop;
      while (lasreader->read_point())
      {
          filtered_count++;
      }


      // ***** Gather and set the write offset for this process *****
      I64* filtered_counts = (I64*)malloc(process_count * sizeof(I64));
      if(is_mpi)MPI_Barrier(MPI_COMM_WORLD);
      filtered_counts[rank] = filtered_count;
      if(is_mpi)MPI_Allgather(&filtered_count, 1, MPI_LONG_LONG, filtered_counts, 1, MPI_LONG_LONG, MPI_COMM_WORLD);
      if(is_mpi)MPI_Barrier(MPI_COMM_WORLD);

      if(debug) printf("filtered count %lli rank %i\n", filtered_counts[rank], rank);

      if(is_mpi)MPI_Barrier(MPI_COMM_WORLD);

      I64 write_point_offset = 0;
      for (int k=0; k < rank; k++){
	  write_point_offset += filtered_counts[k];
      }
      if(is_mpi){

        MPI_File fh = laswriter->get_MPI_File();
        MPI_Offset cur = 0;

        // jdw, todo, remove the hardcoding by adding methods to read point size from reader
        MPI_File_seek(fh, write_point_offset*28, MPI_SEEK_CUR);
        if(debug){
          MPI_File_get_position(fh, &cur);
          printf ("rank %i, write offset %lld\n", rank, write_point_offset*28);
        }
      }
      if(is_mpi)MPI_Barrier(MPI_COMM_WORLD);


      // ***** Read and filter the input file again, this time write the filtered point since output file offset in now known amd set *****
      //lasreader->seek(subsequence_start); // subsequence_start parameter gets cast to U32 in the implementation and overflows for large files
      // manually set the file offset instead for now
      //printf("header end %lld subseqence_start * 28 %lld rank %i\n", header_end_read_position, subsequence_start*28, rank);
      lasreader->p_count = subsequence_start;
      lasreader->get_Stream()->seek(header_end_read_position + subsequence_start*28);
      //printf("seek pos second loop %lld rank %i\n", lasreader->get_Stream()->tell(), rank);

      lasreader->MPI_END_POINT = subsequence_stop;
      while (lasreader->read_point())
      {
          //if (lasreader->p_count > subsequence_stop) break;

          //if (clip_to_bounding_box)
          //{
          //  if (!lasreader->point.inside_box(lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z))
          //  {
          //    continue;
          //  }
         // }

          if (reproject_quantizer)
          {
            lasreader->point.compute_coordinates();
            geoprojectionconverter.to_target(lasreader->point.coordinates);
            lasreader->point.compute_XYZ(reproject_quantizer);
          }

          laswriter->write_point(&lasreader->point);
          // without extra pass we need inventory of surviving points
    	  if (!extra_pass){
            laswriter->update_inventory(&lasreader->point);
    	  }
      }
      //***** this is part of an mpi write optimization *****
      laswriter->get_Stream()->flushBytes();
    }

    // without the extra pass we need to fix the header now
    // ***** do the inventory reconciliation *****
    // ***** Reduce inventory information in rank 0 *****
    if (is_mpi){
        U32 number_of_point_records = 0;
        U32 number_of_points_by_return[8];
        for(int i = 0; i<8; i++)number_of_points_by_return[i] = 0;
        I32 max_X = 0;
        I32 min_X = 0;
        I32 max_Y = 0;
        I32 min_Y = 0;
        I32 max_Z = 0;
        I32 min_Z = 0;

        MPI_Reduce(&laswriter->inventory.number_of_point_records, &number_of_point_records, 1, MPI_UNSIGNED, MPI_SUM, 0, MPI_COMM_WORLD);
        MPI_Reduce(laswriter->inventory.number_of_points_by_return, number_of_points_by_return, 8, MPI_UNSIGNED, MPI_SUM, 0, MPI_COMM_WORLD);
        MPI_Reduce(&laswriter->inventory.max_X, &max_X, 1, MPI_INT, MPI_MAX, 0, MPI_COMM_WORLD);
        MPI_Reduce(&laswriter->inventory.min_X, &min_X, 1, MPI_INT, MPI_MIN, 0, MPI_COMM_WORLD);
        MPI_Reduce(&laswriter->inventory.max_Y, &max_Y, 1, MPI_INT, MPI_MAX, 0, MPI_COMM_WORLD);
        MPI_Reduce(&laswriter->inventory.min_Y, &min_Y, 1, MPI_INT, MPI_MIN, 0, MPI_COMM_WORLD);
        MPI_Reduce(&laswriter->inventory.max_Z, &max_Z, 1, MPI_INT, MPI_MAX, 0, MPI_COMM_WORLD);
        MPI_Reduce(&laswriter->inventory.min_Z, &min_Z, 1, MPI_INT, MPI_MIN, 0, MPI_COMM_WORLD);

        if (rank ==0){
            laswriter->inventory.number_of_point_records = number_of_point_records;
            for(int i=0; i<8; i++)laswriter->inventory.number_of_points_by_return[i] = number_of_points_by_return[i];
            laswriter->inventory.max_X = max_X;
            laswriter->inventory.min_X = min_X;
            laswriter->inventory.max_Y = max_Y;
            laswriter->inventory.min_Y = min_Y;
            laswriter->inventory.max_Z = max_Z;
            laswriter->inventory.min_Z = min_Z;
        }
    }

    if(rank == 0){
      if (!extra_pass)
      {
        if (reproject_quantizer) lasreader->header = *reproject_quantizer;
        laswriter->update_header(&lasreader->header, TRUE);
      }
    }
    if(is_mpi)MPI_Barrier(MPI_COMM_WORLD);
    if (verbose) { fprintf(stderr,"%lli surviving points written by rank: %i\n", laswriter->p_count, rank); }

    laswriter->close(FALSE);
    if(is_mpi)MPI_Barrier(MPI_COMM_WORLD);

    delete laswriter;
    lasreader->close();
    delete lasreader;
    if (reproject_quantizer) delete reproject_quantizer;

  }
  if(is_mpi)MPI_Finalize();

  time(&wall_end_time);

  if (verbose) { fprintf(stderr,"total time %.f sec, cpu time: %g sec. rank: %i\n", difftime(wall_end_time, wall_start_time), taketime()-start_time, rank); }
  return 0;
}
Beispiel #7
0
int main(int argc, char *argv[])
{
  int i;
#ifdef COMPILE_WITH_GUI
  bool gui = false;
#endif
#ifdef COMPILE_WITH_MULTI_CORE
  I32 cores = 1;
#endif
  bool verbose = false;
  bool force = false;
  // fixed header changes 
  int set_version_major = -1;
  int set_version_minor = -1;
  int set_point_data_format = -1;
  int set_point_data_record_length = -1;
  int set_gps_time_endcoding = -1;
  // variable header changes
  bool remove_extra_header = false;
  bool remove_all_variable_length_records = false;
  int remove_variable_length_record = -1;
  bool remove_tiling_vlr = false;
  bool remove_original_vlr = false;
  // extract a subsequence
  unsigned int subsequence_start = 0;
  unsigned int subsequence_stop = U32_MAX;
  // fix files with corrupt points
  bool clip_to_bounding_box = false;
  double start_time = 0;

  LASreadOpener lasreadopener;
  GeoProjectionConverter geoprojectionconverter;
  LASwriteOpener laswriteopener;

  if (argc == 1)
  {
#ifdef COMPILE_WITH_GUI
    return las2las_gui(argc, argv, 0);
#else
    fprintf(stderr,"las2las.exe is better run in the command line or via the lastool.exe GUI\n");
    char file_name[256];
    fprintf(stderr,"enter input file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    lasreadopener.set_file_name(file_name);
    fprintf(stderr,"enter output file: "); fgets(file_name, 256, stdin);
    file_name[strlen(file_name)-1] = '\0';
    laswriteopener.set_file_name(file_name);
#endif
  }
  else
  {
    for (i = 1; i < argc; i++)
    {
      if (argv[i][0] == '–') argv[i][0] = '-';
      if (strcmp(argv[i],"-week_to_adjusted") == 0)
      {
        set_gps_time_endcoding = 1;
      }
      else if (strcmp(argv[i],"-adjusted_to_week") == 0)
      {
        set_gps_time_endcoding = 0;
      }
    }
    if (!geoprojectionconverter.parse(argc, argv)) byebye(true);
    if (!lasreadopener.parse(argc, argv)) byebye(true);
    if (!laswriteopener.parse(argc, argv)) byebye(true);
  }

  for (i = 1; i < argc; i++)
  {
    if (argv[i][0] == '\0')
    {
      continue;
    }
    else if (strcmp(argv[i],"-h") == 0 || strcmp(argv[i],"-help") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      usage();
    }
    else if (strcmp(argv[i],"-v") == 0 || strcmp(argv[i],"-verbose") == 0)
    {
      verbose = true;
    }
    else if (strcmp(argv[i],"-version") == 0)
    {
      fprintf(stderr, "LAStools (by [email protected]) version %d\n", LAS_TOOLS_VERSION);
      byebye();
    }
    else if (strcmp(argv[i],"-gui") == 0)
    {
#ifdef COMPILE_WITH_GUI
      gui = true;
#else
      fprintf(stderr, "WARNING: not compiled with GUI support. ignoring '-gui' ...\n");
#endif
    }
    else if (strcmp(argv[i],"-cores") == 0)
    {
#ifdef COMPILE_WITH_MULTI_CORE
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        usage(true);
      }
      argv[i][0] = '\0';
      i++;
      cores = atoi(argv[i]);
      argv[i][0] = '\0';
#else
      fprintf(stderr, "WARNING: not compiled with multi-core batching. ignoring '-cores' ...\n");
#endif
    }
    else if (strcmp(argv[i],"-force") == 0)
    {
      force = true;
    }
    else if (strcmp(argv[i],"-subseq") == 0)
    {
      if ((i+2) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 2 arguments: start stop\n", argv[i]);
        byebye(true);
      }
      subsequence_start = (unsigned int)atoi(argv[i+1]); subsequence_stop = (unsigned int)atoi(argv[i+2]);
      i+=2;
    }
    else if (strcmp(argv[i],"-start_at_point") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: start\n", argv[i]);
        byebye(true);
      }
      subsequence_start = (unsigned int)atoi(argv[i+1]);
      i+=1;
    }
    else if (strcmp(argv[i],"-stop_at_point") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: stop\n", argv[i]);
        byebye(true);
      }
      subsequence_stop = (unsigned int)atoi(argv[i+1]);
      i+=1;
    }
    else if (strcmp(argv[i],"-set_version") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: major.minor\n", argv[i]);
        byebye(true);
      }
      if (sscanf(argv[i+1],"%d.%d",&set_version_major,&set_version_minor) != 2)
      {
        fprintf(stderr, "ERROR: cannot understand argument '%s' for '%s'\n", argv[i+1], argv[i]);
        usage(true);
      }
      i+=1;
    }
    else if (strcmp(argv[i],"-set_version_major") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: major\n", argv[i]);
        byebye(true);
      }
      set_version_major = atoi(argv[i+1]);
      i+=1;
    }
    else if (strcmp(argv[i],"-set_version_minor") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: minor\n", argv[i]);
        byebye(true);
      }
      set_version_minor = atoi(argv[i+1]);
      i+=1;
    }
    else if (strcmp(argv[i],"-remove_extra") == 0)
    {
      remove_extra_header = true;
    }
    else if (strcmp(argv[i],"-remove_all_vlrs") == 0 || strcmp(argv[i],"-remove_all_vlr") == 0)
    {
      remove_all_variable_length_records = true;
    }
    else if (strcmp(argv[i],"-remove_vlr") == 0)
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: number\n", argv[i]);
        byebye(true);
      }
      remove_variable_length_record = atoi(argv[i+1]);
      i++;
    }
    else if (strcmp(argv[i],"-remove_tiling_vlr") == 0)
    {
      remove_tiling_vlr = true;
      i++;
    }
    else if (strcmp(argv[i],"-remove_original_vlr") == 0)
    {
      remove_original_vlr = true;
      i++;
    }
    else if (strcmp(argv[i],"-point_type") == 0) 
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: type\n", argv[i]);
        byebye(true);
      }
      set_point_data_format = atoi(argv[i+1]);
      i++;
    }
    else if (strcmp(argv[i],"-point_size") == 0) 
    {
      if ((i+1) >= argc)
      {
        fprintf(stderr,"ERROR: '%s' needs 1 argument: size\n", argv[i]);
        byebye(true);
      }
      set_point_data_record_length = atoi(argv[i+1]);
      i++;
    }
    else if (strcmp(argv[i],"-clip_to_bounding_box") == 0 || strcmp(argv[i],"-clip_to_bbox") == 0) 
    {
      clip_to_bounding_box = true;
    }
    else if ((argv[i][0] != '-') && (lasreadopener.get_file_name_number() == 0))
    {
      lasreadopener.add_file_name(argv[i]);
      argv[i][0] = '\0';
    }
    else
    {
      fprintf(stderr, "ERROR: cannot understand argument '%s'\n", argv[i]);
      usage(true);
    }
  }

#ifdef COMPILE_WITH_GUI
  if (gui)
  {
    return las2las_gui(argc, argv, &lasreadopener);
  }
#endif

#ifdef COMPILE_WITH_MULTI_CORE
  if ((cores > 1) && (lasreadopener.get_file_name_number() > 1) && (!lasreadopener.get_merged()))
  {
    return las2las_multi_core(argc, argv, &geoprojectionconverter, &lasreadopener, &laswriteopener, cores);
  }
#endif

  // check input

  if (!lasreadopener.active())
  {
    fprintf(stderr,"ERROR: no input specified\n");
    usage(true, argc==1);
  }
  
  BOOL extra_pass = laswriteopener.is_piped();

  // for piped output we need an extra pass

  if (extra_pass)
  {
    if (lasreadopener.is_piped())
    {
      fprintf(stderr, "ERROR: input and output cannot both be piped\n");
      usage(true);
    }
  }

  // make sure we do not corrupt the input file

  if (lasreadopener.get_file_name() && laswriteopener.get_file_name() && (strcmp(lasreadopener.get_file_name(), laswriteopener.get_file_name()) == 0))
  {
    fprintf(stderr, "ERROR: input and output file name are identical\n");
    usage(true);
  }
    
  // possibly loop over multiple input files

  while (lasreadopener.active())
  {
    if (verbose) start_time = taketime();

    // open lasreader

    LASreader* lasreader = lasreadopener.open();

    if (lasreader == 0)
    {
      fprintf(stderr, "ERROR: could not open lasreader\n");
      usage(true, argc==1);
    }

    // store the inventory for the header

    LASinventory lasinventory;

    // the point we write sometimes needs to be copied

    LASpoint* point = 0;

    // prepare the header for output

    if (set_gps_time_endcoding != -1)
    {
      if (set_gps_time_endcoding == 0)
      {
        if ((lasreader->header.global_encoding & 1) == 0)
        {
          fprintf(stderr, "WARNING: global encoding indicates file already in GPS week time\n");
          if (force)
          {
            fprintf(stderr, "         forced conversion.\n");
          }
          else
          {
            fprintf(stderr, "         use '-force' to force conversion.\n");
            byebye(true);
          }
        }
        else
        {
          lasreader->header.global_encoding &= ~1;
        }
      }
      else if (set_gps_time_endcoding == 1)
      {
        if ((lasreader->header.global_encoding & 1) == 1)
        {
          fprintf(stderr, "WARNING: global encoding indicates file already in Adjusted Standard GPS time\n");
          if (force)
          {
            fprintf(stderr, "         forced conversion.\n");
          }
          else
          {
            fprintf(stderr, "         use '-force' to force conversion.\n");
            byebye(true);
          }
        }
        else
        {
          lasreader->header.global_encoding |= 1;
        }
      }
    }

    if (set_version_major != -1)
    {
      if (set_version_major != 1)
      {
        fprintf(stderr, "ERROR: unknown version_major %d\n", set_version_major);
        byebye(true);
      }
      lasreader->header.version_major = (U8)set_version_major;
    }
    if (set_version_minor >= 0)
    {
      if (set_version_minor > 4)
      {
        fprintf(stderr, "ERROR: unknown version_minor %d\n", set_version_minor);
        byebye(true);
      }
      if (set_version_minor < 3)
      {
        if (lasreader->header.version_minor == 3)
        {
          lasreader->header.header_size -= 8;
          lasreader->header.offset_to_point_data -= 8;
        }
        else if (lasreader->header.version_minor >= 4)
        {
          lasreader->header.header_size -= (8 + 140);
          lasreader->header.offset_to_point_data -= (8 + 140);
        }
      }
      else if (set_version_minor == 3)
      {
        if (lasreader->header.version_minor < 3)
        {
          lasreader->header.header_size += 8;
          lasreader->header.offset_to_point_data += 8;
          lasreader->header.start_of_waveform_data_packet_record = 0;
        }
        else if (lasreader->header.version_minor >= 4)
        {
          lasreader->header.header_size -= 140;
          lasreader->header.offset_to_point_data -= 140;
        }
      }
      else if (set_version_minor == 4) 
      {
        if (lasreader->header.version_minor < 3)
        {
          lasreader->header.header_size += (8 + 140);
          lasreader->header.offset_to_point_data += (8 + 140);
          lasreader->header.start_of_waveform_data_packet_record = 0;
        }
        else if (lasreader->header.version_minor == 3)
        {
          lasreader->header.header_size += 140;
          lasreader->header.offset_to_point_data += 140;
        }
      }
      lasreader->header.version_minor = (U8)set_version_minor;
    }

    // are we supposed to change the point data format

    if (set_point_data_format != -1)
    {
      if (set_point_data_format < 0 || set_point_data_format >= 6)
      {
        fprintf(stderr, "ERROR: unknown point_data_format %d\n", set_point_data_format);
        byebye(true);
      }
      // depending on the conversion we may need to copy the point
      if (convert_point_type_from_to[lasreader->header.point_data_format][set_point_data_format])
      {
        point = new LASpoint;
      }
      lasreader->header.point_data_format = (U8)set_point_data_format;
      lasreader->header.clean_laszip();
      switch (lasreader->header.point_data_format)
      {
      case 0:
        lasreader->header.point_data_record_length = 20;
        break;
      case 1:
        lasreader->header.point_data_record_length = 28;
        break;
      case 2:
        lasreader->header.point_data_record_length = 26;
        break;
      case 3:
        lasreader->header.point_data_record_length = 34;
        break;
      case 4:
        lasreader->header.point_data_record_length = 57;
        break;
      case 5:
        lasreader->header.point_data_record_length = 63;
        break;
      }
    }

    // are we supposed to change the point data record length

    if (set_point_data_record_length != -1)
    {
      I32 num_extra_bytes = 0;
      switch (lasreader->header.point_data_format)
      {
      case 0:
        num_extra_bytes = set_point_data_record_length - 20;
        break;
      case 1:
        num_extra_bytes = set_point_data_record_length - 28;
        break;
      case 2:
        num_extra_bytes = set_point_data_record_length - 26;
        break;
      case 3:
        num_extra_bytes = set_point_data_record_length - 34;
        break;
      case 4:
        num_extra_bytes = set_point_data_record_length - 57;
        break;
      case 5:
        num_extra_bytes = set_point_data_record_length - 63;
        break;
      }
      if (num_extra_bytes < 0)
      {
        fprintf(stderr, "ERROR: point_data_format %d needs record length of at least %d\n", lasreader->header.point_data_format, set_point_data_record_length - num_extra_bytes);
        byebye(true);
      }
      if (lasreader->header.point_data_record_length < set_point_data_record_length)
      {
        if (!point) point = new LASpoint;
      }
      lasreader->header.point_data_record_length = (U16)set_point_data_record_length;
      lasreader->header.clean_laszip();
    }

    // if the point needs to be copied set up the data fields

    if (point)
    {
      point->init(&lasreader->header, lasreader->header.point_data_format, lasreader->header.point_data_record_length);
    }

    // maybe we should remove some stuff

    if (remove_extra_header)
    {
      lasreader->header.clean_user_data_in_header();
      lasreader->header.clean_user_data_after_header();
    }

    if (remove_all_variable_length_records)
    {
      lasreader->header.clean_vlrs();
    }

    if (remove_variable_length_record != -1)
    {
      lasreader->header.remove_vlr(remove_variable_length_record);
    }

    if (remove_tiling_vlr)
    {
      lasreader->header.clean_lastiling();
    }

    if (remove_original_vlr)
    {
      lasreader->header.clean_lasoriginal();
    }

    // maybe we should add / change the projection information
    LASquantizer* reproject_quantizer = 0;
    LASquantizer* saved_quantizer = 0;
    if (geoprojectionconverter.has_projection(true) || geoprojectionconverter.has_projection(false))
    {
      if (!geoprojectionconverter.has_projection(true) && lasreader->header.vlr_geo_keys)
      {
        geoprojectionconverter.set_projection_from_geo_keys(lasreader->header.vlr_geo_keys[0].number_of_keys, (GeoProjectionGeoKeys*)lasreader->header.vlr_geo_key_entries, lasreader->header.vlr_geo_ascii_params, lasreader->header.vlr_geo_double_params);
      }

      if (geoprojectionconverter.has_projection(true) && geoprojectionconverter.has_projection(false))
      {
        reproject_quantizer = new LASquantizer();
        double point[3];
        point[0] = (lasreader->header.min_x+lasreader->header.max_x)/2;
        point[1] = (lasreader->header.min_y+lasreader->header.max_y)/2;
        point[2] = (lasreader->header.min_z+lasreader->header.max_z)/2;
        geoprojectionconverter.to_target(point);
        reproject_quantizer->x_scale_factor = geoprojectionconverter.get_target_precision();
        reproject_quantizer->y_scale_factor = geoprojectionconverter.get_target_precision();
        reproject_quantizer->z_scale_factor = lasreader->header.z_scale_factor;
        reproject_quantizer->x_offset = ((I64)((point[0]/reproject_quantizer->x_scale_factor)/10000000))*10000000*reproject_quantizer->x_scale_factor;
        reproject_quantizer->y_offset = ((I64)((point[1]/reproject_quantizer->y_scale_factor)/10000000))*10000000*reproject_quantizer->y_scale_factor;
        reproject_quantizer->z_offset = ((I64)((point[2]/reproject_quantizer->z_scale_factor)/10000000))*10000000*reproject_quantizer->z_scale_factor;
      }

      int number_of_keys;
      GeoProjectionGeoKeys* geo_keys = 0;
      int num_geo_double_params;
      double* geo_double_params = 0;

      if (geoprojectionconverter.get_geo_keys_from_projection(number_of_keys, &geo_keys, num_geo_double_params, &geo_double_params, !geoprojectionconverter.has_projection(false)))
      {
        lasreader->header.set_geo_keys(number_of_keys, (LASvlr_key_entry*)geo_keys);
        free(geo_keys);
        if (geo_double_params)
        {
          lasreader->header.set_geo_double_params(num_geo_double_params, geo_double_params);
          free(geo_double_params);
        }
        else
        {
          lasreader->header.del_geo_double_params();
        }
        lasreader->header.del_geo_ascii_params();
      }
    }

    // do we need an extra pass

    BOOL extra_pass = laswriteopener.is_piped();

    // for piped output we need an extra pass

    if (extra_pass)
    {
      if (lasreadopener.is_piped())
      {
        fprintf(stderr, "ERROR: input and output cannot both be piped\n");
        usage(true);
      }

#ifdef _WIN32
      if (verbose) fprintf(stderr, "extra pass for piped output: reading %I64d points ...\n", lasreader->npoints);
#else
      if (verbose) fprintf(stderr, "extra pass for piped output: reading %lld points ...\n", lasreader->npoints);
#endif

      // maybe seek to start position

      if (subsequence_start) lasreader->seek(subsequence_start);

      while (lasreader->read_point())
      {
        if (lasreader->p_count > subsequence_stop) break;

        if (clip_to_bounding_box)
        {
          if (!lasreader->point.inside_box(lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z))
          {
            continue;
          }
        }

        if (reproject_quantizer)
        {
          lasreader->point.compute_coordinates();
          geoprojectionconverter.to_target(lasreader->point.coordinates);
          lasreader->point.compute_xyz(reproject_quantizer);
        }
        lasinventory.add(&lasreader->point);
      }
      lasreader->close();

      lasreader->header.number_of_point_records = lasinventory.number_of_point_records;
      for (i = 0; i < 5; i++) lasreader->header.number_of_points_by_return[i] = lasinventory.number_of_points_by_return[i+1];
      if (reproject_quantizer) lasreader->header = *reproject_quantizer;
      lasreader->header.max_x = lasreader->header.get_x(lasinventory.raw_max_x);
      lasreader->header.min_x = lasreader->header.get_x(lasinventory.raw_min_x);
      lasreader->header.max_y = lasreader->header.get_y(lasinventory.raw_max_y);
      lasreader->header.min_y = lasreader->header.get_y(lasinventory.raw_min_y);
      lasreader->header.max_z = lasreader->header.get_z(lasinventory.raw_max_z);
      lasreader->header.min_z = lasreader->header.get_z(lasinventory.raw_min_z);

      if (verbose) { fprintf(stderr,"extra pass took %g sec.\n", taketime()-start_time); start_time = taketime(); }
#ifdef _WIN32
      if (verbose) fprintf(stderr, "piped output: reading %I64d and writing %u points ...\n", lasreader->npoints, lasinventory.number_of_point_records);
#else
      if (verbose) fprintf(stderr, "piped output: reading %lld and writing %u points ...\n", lasreader->npoints, lasinventory.number_of_point_records);
#endif
    }
    else
    {
      if (reproject_quantizer)
      {
        saved_quantizer = new LASquantizer();
        *saved_quantizer = lasreader->header;
        lasreader->header = *reproject_quantizer;
      }
#ifdef _WIN32
      if (verbose) fprintf(stderr, "reading %I64d and writing all surviving points ...\n", lasreader->npoints);
#else
      if (verbose) fprintf(stderr, "reading %lld and writing all surviving points ...\n", lasreader->npoints);
#endif
    }

    // check output

    if (!laswriteopener.active())
    {
      // create name from input name
      laswriteopener.make_file_name(lasreadopener.get_file_name());
    }

    // prepare the header for the surviving points

    strncpy(lasreader->header.system_identifier, "LAStools (c) by Martin Isenburg", 32);
    lasreader->header.system_identifier[31] = '\0';
    char temp[64];
    sprintf(temp, "las2las (version %d)", LAS_TOOLS_VERSION);
    strncpy(lasreader->header.generating_software, temp, 32);
    lasreader->header.generating_software[31] = '\0';

    // open laswriter

    LASwriter* laswriter = laswriteopener.open(&lasreader->header);

    if (laswriter == 0)
    {
      fprintf(stderr, "ERROR: could not open laswriter\n");
      byebye(true, argc==1);
    }

    // for piped output we need to re-open the input file

    if (extra_pass)
    {
      if (!lasreadopener.reopen(lasreader))
      {
        fprintf(stderr, "ERROR: could not re-open lasreader\n");
        byebye(true);
      }
    }
    else
    {
      if (reproject_quantizer)
      {
        lasreader->header = *saved_quantizer;
        delete saved_quantizer;
      }
    }

    // maybe seek to start position

    if (subsequence_start) lasreader->seek(subsequence_start);

    // loop over points

    if (point)
    {
      while (lasreader->read_point())
      {
        if (lasreader->p_count > subsequence_stop) break;

        if (clip_to_bounding_box)
        {
          if (!lasreader->point.inside_box(lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z))
          {
            continue;
          }
        }

        if (reproject_quantizer)
        {
          lasreader->point.compute_coordinates();
          geoprojectionconverter.to_target(lasreader->point.coordinates);
          lasreader->point.compute_xyz(reproject_quantizer);
        }
        *point = lasreader->point;
        laswriter->write_point(point);
        // without extra pass we need inventory of surviving points
        if (!extra_pass) laswriter->update_inventory(point);
      }
      delete point;
      point = 0;
    }
    else
    {
      while (lasreader->read_point())
      {
        if (lasreader->p_count > subsequence_stop) break;

        if (clip_to_bounding_box)
        {
          if (!lasreader->point.inside_box(lasreader->header.min_x, lasreader->header.min_y, lasreader->header.min_z, lasreader->header.max_x, lasreader->header.max_y, lasreader->header.max_z))
          {
            continue;
          }
        }

        if (reproject_quantizer)
        {
          lasreader->point.compute_coordinates();
          geoprojectionconverter.to_target(lasreader->point.coordinates);
          lasreader->point.compute_xyz(reproject_quantizer);
        }
        laswriter->write_point(&lasreader->point);
        // without extra pass we need inventory of surviving points
        if (!extra_pass) laswriter->update_inventory(&lasreader->point);
      }
    }

    // without the extra pass we need to fix the header now

    if (!extra_pass)
    {
      if (reproject_quantizer) lasreader->header = *reproject_quantizer;
      laswriter->update_header(&lasreader->header, TRUE);
      if (verbose) { fprintf(stderr,"total time: %g sec. written %u surviving points.\n", taketime()-start_time, (U32)laswriter->p_count); }
    }
    else
    {
      if (verbose) { fprintf(stderr,"main pass took %g sec.\n", taketime()-start_time); }
    }

    laswriter->close();
    delete laswriter;

    lasreader->close();
    delete lasreader;

    if (reproject_quantizer) delete reproject_quantizer;

    laswriteopener.set_file_name(0);
  }

  byebye(false, argc==1);

  return 0;
}