void CDVRPTRClientApp::createThread()
{
m_thread = new CDVRPTRClientThread;
m_thread->Create();
m_thread->Run();
wxString callsign1, callsign2;
getCallsign(callsign1, callsign2);
m_thread->setCallsign(callsign1, callsign2);
wxString call;
wxSortedArrayString list;
getYourCalls(call, list);
m_thread->setYour(call);
getRpt1Calls(call, list);
m_thread->setRpt1(call);
getRpt2Calls(call, list);
m_thread->setRpt2(call);
wxString message;
getMessage(message);
m_thread->setMessage(message);
wxString device;
getDVDongle(device);
if (!device.IsEmpty()) {
CDVDongleController* dongle = new CDVDongleController(new CSerialDataController(device, SERIAL_230400));
bool res = dongle->open();
if (!res) {
wxLogError(wxT("Can't find the DV-Dongle on the port specified"));
error(_("Can't find the DV-Dongle on the port specified"));
} else {
m_thread->setDVDongle(dongle);
}
}
wxString readDevice, writeDevice;
getSoundcard(readDevice, writeDevice);
if (!readDevice.IsEmpty() && !writeDevice.IsEmpty()) {
#if defined(__WINDOWS__)
CSoundCardReaderWriter* soundcard = new CSoundCardReaderWriter(readDevice, writeDevice, DSTAR_RADIO_SAMPLE_RATE, DSTAR_RADIO_BLOCK_SIZE);
#else
CSoundCardReaderWriter* soundcard = new CSoundCardReaderWriter(readDevice, writeDevice, DSTAR_RADIO_SAMPLE_RATE, 64U);
#endif
soundcard->setCallback(m_thread, 0);
bool res = soundcard->open();
if (!res) {
wxLogError(wxT("Cannot open the sound card"));
error(_("Cannot open the sound card"));
} else {
m_thread->setSoundCard(soundcard);
}
}
wxString modemPort;
DVRPTR_VERSION version;
bool rxInvert, txInvert, channel;
unsigned int modLevel, txDelay;
getModem(version, modemPort, rxInvert, txInvert, channel, modLevel, txDelay);
if (!modemPort.IsEmpty()) {
IDVRPTRController* controller = NULL;
switch (version) {
case DVRPTR_V1:
controller = new CDVRPTRControllerV1(modemPort, rxInvert, txInvert, channel, modLevel, txDelay);
break;
case DVRPTR_V2:
controller = new CDVRPTRControllerV2(modemPort, txInvert, modLevel);
break;
default:
wxLogError(wxT("Unknown DV-RPTR modem version - %d"), int(version));
break;
}
if (controller != NULL) {
bool res = controller->open();
if (!res) {
wxLogError(wxT("Cannot open the DV-RPTR modem"));
error(_("Cannot open the DV-RPTR modem"));
} else {
m_thread->setModem(controller);
}
}
}
bool bleep;
getBleep(bleep);
m_thread->setBleep(bleep);
}
void CDVRPTRRepeaterApp::createThread()
{
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation;
getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
IDVRPTRRepeaterThread* thread = NULL;
switch (mode) {
case MODE_RXONLY:
thread = new CDVRPTRRepeaterRXThread;
break;
case MODE_TXONLY:
thread = new CDVRPTRRepeaterTXThread;
break;
case MODE_TXANDRX:
thread = new CDVRPTRRepeaterTXRXThread;
break;
default:
thread = new CDVRPTRRepeaterTRXThread;
break;
}
thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
wxLogInfo(wxT("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d"), callsign.c_str(), gateway.c_str(), int(mode), int(ack), restriction, rpt1Validation);
wxString gatewayAddress, localAddress;
unsigned int gatewayPort, localPort;
getNetwork(gatewayAddress, gatewayPort, localAddress, localPort);
wxLogInfo(wxT("Gateway set to %s:%u, local set to %s:%u"), gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort);
if (!gatewayAddress.IsEmpty()) {
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort);
bool res = handler->open();
if (!res)
wxLogError(wxT("Cannot open the protocol handler"));
else
thread->setProtocolHandler(handler);
}
unsigned int timeout, ackTime;
getTimes(timeout, ackTime);
thread->setTimes(timeout, ackTime);
wxLogInfo(wxT("Timeout set to %u secs, ack time set to %u ms"), timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
getBeacon(beaconTime, beaconText, beaconVoice, language);
if (mode == MODE_GATEWAY)
beaconTime = 0U;
thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo(wxT("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d"), beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
DVRPTR_VERSION modemVersion;
CONNECTION_TYPE modemType;
wxString modemUSBPort, modemAddress, modemUSBPath;
bool rxInvert, txInvert, channel;
unsigned int modemPort, modLevel, txDelay;
getModem(modemVersion, modemType, modemUSBPort, modemAddress, modemPort, rxInvert, txInvert, channel, modLevel, txDelay);
wxLogInfo(wxT("DV-RPTR modem: version: %d, type: %d, USB port: %s, address: %s:%u, RX invert: %d, TX invert: %d, channel: %s, mod level: %u%%, TX delay: %u ms"), int(modemVersion), int(modemType), modemUSBPort.c_str(), modemAddress.c_str(), modemPort, int(rxInvert), int(txInvert), channel ? wxT("B") : wxT("A"), modLevel, txDelay);
if (modemType == CT_USB) {
if (!modemUSBPort.IsEmpty()) {
getModem(modemUSBPath);
if (!modemUSBPath.IsEmpty())
wxLogInfo(wxT("DV-RPTR modem: path: %s"), modemUSBPath.c_str());
IDVRPTRController* controller = NULL;
switch (modemVersion) {
case DVRPTR_V1:
controller = new CDVRPTRControllerV1(modemUSBPort, modemUSBPath, rxInvert, txInvert, channel, modLevel, txDelay);
break;
case DVRPTR_V2:
controller = new CDVRPTRControllerV2(modemUSBPort, modemUSBPath, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign);
break;
default:
wxLogError(wxT("Unknown DV-RPTR modem version - %d"), int(modemVersion));
break;
}
if (controller != NULL) {
bool res = controller->open();
if (!res) {
wxLogError(wxT("Cannot open the DV-RPTR modem"));
} else {
thread->setModem(controller);
setModem(controller->getPath());
}
}
}
} else if (modemType == CT_NETWORK) {
if (!modemAddress.IsEmpty()) {
CDVRPTRControllerV2* controller = new CDVRPTRControllerV2(modemAddress, modemPort, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign);
bool res = controller->open();
if (!res)
wxLogError(wxT("Cannot open the DV-RPTR modem"));
else
thread->setModem(controller);
}
}
wxString controllerType;
unsigned int activeHangTime;
getController(controllerType, activeHangTime);
wxLogInfo(wxT("Controller set to %s, active hang time: %u ms"), controllerType.c_str(), activeHangTime);
CExternalController* controller = NULL;
wxString port;
if (controllerType.StartsWith(wxT("Velleman K8055 - "), &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CK8055Controller(num), false, false);
} else if (controllerType.IsSameAs(wxT("Raspberry Pi"))) {
controller = new CExternalController(new CRaspberryController, false, false);
} else {
controller = new CExternalController(new CDummyController, false, false);
}
bool res = controller->open();
if (!res)
wxLogError(wxT("Cannot open the hardware interface - %s"), controllerType.c_str());
else
thread->setController(controller, activeHangTime);
bool out1, out2, out3, out4;
getOutputs(out1, out2, out3, out4);
thread->setOutputs(out1, out2, out3, out4);
m_frame->setOutputs(out1, out2, out3, out4);
wxLogInfo(wxT("Output 1 = %d, output 2 = %d, output 3 = %d, output 4 = %d"), out1, out2, out3, out4);
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
wxString status1, status2, status3, status4, status5;
wxString command1, command1Line, command2, command2Line;
wxString command3, command3Line, command4, command4Line;
wxString output1, output2, output3, output4;
getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, output1, output2, output3, output4);
thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, output1, output2, output3, output4);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s, output1: %s, output2: %s, output3: %s, output4: %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status1.c_str(), status2.c_str(), status3.c_str(), status4.c_str(), status5.c_str(), command1.c_str(), command1Line.c_str(), command2.c_str(), command2Line.c_str(), command3.c_str(), command3Line.c_str(), command4.c_str(), command4Line.c_str(), output1.c_str(), output2.c_str(), output3.c_str(), output4.c_str());
bool logging;
getLogging(logging);
thread->setLogging(logging, m_audioDir);
m_frame->setLogging(logging);
wxLogInfo(wxT("Frame logging set to %d, in %s"), int(logging), m_audioDir.c_str());
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
thread->setBlackList(list);
}
}
// Convert the worker class into a thread
m_thread = new CDVRPTRRepeaterThreadHelper(thread);
m_thread->start();
}
