bool partMover::sequence_iterator(partMover* currP)
{
//fprintf(stderr, "calling sequence iterator \n");
IPositionControl *ipos = currP->pos;
IEncoders *iiencs = currP->iencs;
IAmplifierControl *iamp = currP->amp;
IPidControl *ipid = currP->pid;
int *SEQUENCE_TMP = currP->SEQUENCE;
double *TIMING_TMP = currP->TIMING;
double **STORED_POS_TMP = currP->STORED_POS;
double **STORED_VEL_TMP = currP->STORED_VEL;
int *INV_SEQUENCE_TMP = currP->INV_SEQUENCE;
GtkWidget **sliderAry = currP->sliderArray;
GtkWidget **sliderVelAry = currP->sliderVelArray;
GtkWidget *tree_view = currP->treeview;
guint32* timeout_seqeunce_rate_tmp = currP->timeout_seqeunce_rate;
guint* timeout_seqeunce_id_tmp = currP->timeout_seqeunce_id;
int *SEQUENCE_ITERATOR_TMP = currP->SEQUENCE_ITERATOR;
int j = (*SEQUENCE_ITERATOR_TMP);
int NUMBER_OF_JOINTS;
ipos->getAxes(&NUMBER_OF_JOINTS);
if (INV_SEQUENCE_TMP[j]!=-1)
{
ipos->setRefSpeeds(STORED_VEL_TMP[INV_SEQUENCE_TMP[j]]);
ipos->positionMove(STORED_POS_TMP[INV_SEQUENCE_TMP[j]]);
for (int k =0; k < NUMBER_OF_JOINTS; k++)
{
gtk_range_set_value ((GtkRange *) (sliderAry[k]), STORED_POS_TMP[INV_SEQUENCE_TMP[j]][k]);
gtk_range_set_value ((GtkRange *) (sliderVelAry[k]), STORED_VEL_TMP[INV_SEQUENCE_TMP[j]][k]);
}
(*SEQUENCE_ITERATOR_TMP)++;
*timeout_seqeunce_rate_tmp = (unsigned int) (TIMING_TMP[j]*1000);
gtk_timeout_remove(*timeout_seqeunce_id_tmp);
*timeout_seqeunce_id_tmp = gtk_timeout_add(*timeout_seqeunce_rate_tmp, (GtkFunction) sequence_iterator, currP);
}
else
{
//restart the sequence if finished
*SEQUENCE_ITERATOR_TMP = 0;
j = 0;
ipos->setRefSpeeds(STORED_VEL_TMP[INV_SEQUENCE_TMP[j]]);
ipos->positionMove(STORED_POS_TMP[INV_SEQUENCE_TMP[j]]);
for (int k =0; k < NUMBER_OF_JOINTS; k++)
{
gtk_range_set_value ((GtkRange *) (sliderAry[k]), STORED_POS_TMP[INV_SEQUENCE_TMP[j]][k]);
gtk_range_set_value ((GtkRange *) (sliderVelAry[k]), STORED_VEL_TMP[INV_SEQUENCE_TMP[j]][k]);
}
(*SEQUENCE_ITERATOR_TMP)++;
*timeout_seqeunce_rate_tmp = (unsigned int) (TIMING_TMP[j]*1000);
gtk_timeout_remove(*timeout_seqeunce_id_tmp);
*timeout_seqeunce_id_tmp = gtk_timeout_add(*timeout_seqeunce_rate_tmp, (GtkFunction) sequence_iterator, currP);
}
return false;
}
void partMover::go_click(GtkButton *button, partMover *currentPart)
{
IPositionControl *ipos = currentPart->pos;
IEncoders *iiencs = currentPart->iencs;
IAmplifierControl *iamp = currentPart->amp;
IPidControl *ipid = currentPart->pid;
int *SEQUENCE_TMP = currentPart->SEQUENCE;
double *TIMING_TMP = currentPart->TIMING;
double **STORED_POS_TMP = currentPart->STORED_POS;
double **STORED_VEL_TMP = currentPart->STORED_VEL;
GtkWidget **sliderAry = currentPart->sliderArray;
GtkWidget **sliderVelAry = currentPart->sliderVelArray;
int NUMBER_OF_JOINTS;
ipos->getAxes(&NUMBER_OF_JOINTS);
//get the current row index
int i = get_index_selection(currentPart);
if (i != -1)
{
if (TIMING_TMP[i]>0)
{
ipos->setRefSpeeds(STORED_VEL_TMP[i]);
ipos->positionMove(STORED_POS_TMP[i]);
for (int k =0; k < NUMBER_OF_JOINTS; k++)
{
gtk_range_set_value ((GtkRange *) (sliderAry[k]), STORED_POS_TMP[i][k]);
gtk_range_set_value ((GtkRange *) (sliderVelAry[k]), STORED_VEL_TMP[i][k]);
}
}
}
return;
}
void partMover::sequence_click(GtkButton *button, partMover* currentPart)
{
IPositionControl *ipos = currentPart->pos;
IEncoders *iiencs = currentPart->iencs;
IAmplifierControl *iamp = currentPart->amp;
IPidControl *ipid = currentPart->pid;
int *SEQUENCE_TMP = currentPart->SEQUENCE;
double *TIMING_TMP = currentPart->TIMING;
double **STORED_POS_TMP = currentPart->STORED_POS;
double **STORED_VEL_TMP = currentPart->STORED_VEL;
GtkWidget **sliderAry = currentPart->sliderArray;
GtkWidget **sliderVelAry = currentPart->sliderVelArray;
int j;
int NUMBER_OF_JOINTS;
ipos->getAxes(&NUMBER_OF_JOINTS);
int invSequence[NUMBER_OF_STORED];
for (j = 0; j < NUMBER_OF_STORED; j++)
invSequence[j] = -1;
for (j = 0; j < NUMBER_OF_STORED; j++)
{
if (SEQUENCE_TMP[j]>-1 && (SEQUENCE_TMP[j]<NUMBER_OF_STORED))
invSequence[SEQUENCE_TMP[j]] = j;
}
for (j = 0; j < NUMBER_OF_STORED; j++)
if (invSequence[j]!=-1)
{
if (TIMING_TMP[invSequence[j]] > 0)
{
ipos->setRefSpeeds(STORED_VEL_TMP[invSequence[j]]);
ipos->positionMove(STORED_POS_TMP[invSequence[j]]);
for (int k =0; k < NUMBER_OF_JOINTS; k++)
{
gtk_range_set_value ((GtkRange *) (sliderAry[k]), STORED_POS_TMP[invSequence[j]][k]);
gtk_range_set_value ((GtkRange *) (sliderVelAry[k]), STORED_VEL_TMP[invSequence[j]][k]);
}
Time::delay(TIMING_TMP[invSequence[j]]);
}
}
else
break;
return;
}
void _send(const ActionItem *x)
{
if (!connected)
{
cerr<<"Error: not connected to control board skipping"<<endl;
return;
}
int size=x->getCmd().size();
int offset=x->getOffset();
double time=x->getTime();
int nJoints=0;
enc->getAxes(&nJoints);
if ((offset+size)>nJoints)
{
cerr<<"Error: detected possible overflow, skipping"<<endl;
cerr<<"For debug --> joints: "<<nJoints<< " off: "<<offset<<" cmd length: "<<size<<endl;
return;
}
Vector disp(size);
if (time==0)
{
return;
}
for (size_t i=0; i<disp.length(); i++)
{
double q;
if (!enc->getEncoder(offset+i,&q))
{
cerr<<"Error: encoders timed out, cannot rely on encoder feedback, aborted"<<endl;
return;
}
disp[i]=x->getCmd()[i]-q;
if (disp[i]<0.0)
disp[i]=-disp[i];
}
// don't blend together the two "for"
// since we have to enforce the modes on the whole
// prior to commanding the joints
std::vector<int> joints;
std::vector<int> modes;
std::vector<double> speeds;
std::vector<double> positions;
for (size_t i=0; i<disp.length(); i++)
{
joints.push_back(offset+i);
speeds.push_back(disp[i]/time);
modes.push_back(VOCAB_CM_POSITION);
positions.push_back(x->getCmd()[i]);
}
mode->setControlModes(disp.length(), joints.data(), modes.data());
yarp::os::Time::delay(0.01); // give time to update control modes value
mode->getControlModes(disp.length(), joints.data(), modes.data());
for (size_t i=0; i<disp.length(); i++)
{
if(modes[i] != VOCAB_CM_POSITION)
{
yError() << "Joint " << i << " not in position mode";
}
}
pos->setRefSpeeds(disp.length(), joints.data(), speeds.data());
pos->positionMove(disp.length(), joints.data(), positions.data());
cout << "Script port: " << x->getCmd().toString() << endl;
}
int main(int argc, char *argv[])
{
// just list the devices if no argument given
if (argc <= 2) {
printf("You can call %s like this:\n", argv[0]);
printf(" %s --robot ROBOTNAME --OPTION VALUE ...\n", argv[0]);
printf("For example:\n");
printf(" %s --robot icub --local /talkto/james --remote /controlboard/rpc\n", argv[0]);
printf("Here are devices listed for your system:\n");
printf("%s", Drivers::factory().toString().c_str());
return 0;
}
// get command line options
Property options;
options.fromCommand(argc, argv);
if (!options.check("robot") || !options.check("part")) {
printf("Missing either --robot or --part options\n");
return 0;
}
Network::init();
Time::turboBoost();
std::string name;
Value& v = options.find("robot");
Value& part = options.find("part");
Value *val;
if (!options.check("device", val)) {
options.put("device", "remote_controlboard");
}
if (!options.check("local", val)) {
name="/"+std::string(v.asString().c_str())+"/"+std::string(part.asString().c_str())+"/simpleclient";
//sprintf(&name[0], "/%s/%s/client", v.asString().c_str(), part.asString().c_str());
options.put("local", name.c_str());
}
if (!options.check("remote", val)) {
name="/"+std::string(v.asString().c_str())+"/"+std::string(part.asString().c_str());
//sprintf(&name[0], "/%s/%s", v.asString().c_str(), part.asString().c_str());
options.put("remote", name.c_str());
}
fprintf(stderr, "%s", options.toString().c_str());
// create a device
PolyDriver dd(options);
if (!dd.isValid()) {
printf("Device not available. Here are the known devices:\n");
printf("%s", Drivers::factory().toString().c_str());
Network::fini();
return 1;
}
IPositionControl *pos;
IPositionDirect *posDir;
IVelocityControl *vel;
IEncoders *enc;
IPidControl *pid;
IAmplifierControl *amp;
IControlLimits *lim;
// IControlMode *icm;
IControlMode2 *iMode2;
ITorqueControl *itorque;
IOpenLoopControl *iopenloop;
IImpedanceControl *iimp;
IInteractionMode *iInteract;
bool ok;
ok = dd.view(pos);
ok &= dd.view(vel);
ok &= dd.view(enc);
ok &= dd.view(pid);
ok &= dd.view(amp);
ok &= dd.view(lim);
// ok &= dd.view(icm);
ok &= dd.view(itorque);
ok &= dd.view(iopenloop);
ok &= dd.view(iimp);
ok &= dd.view(posDir);
ok &= dd.view(iMode2);
ok &= dd.view(iInteract);
if (!ok) {
printf("Problems acquiring interfaces\n");
return 1;
}
pos->getAxes(&jnts);
printf("Working with %d axes\n", jnts);
double *tmp = new double[jnts];
printf("Device active...\n");
while (dd.isValid()) {
std::string s;
s.resize(1024);
printf("-> ");
char c = 0;
int i = 0;
while (c != '\n') {
c = (char)fgetc(stdin);
s[i++] = c;
}
s[i-1] = s[i] = 0;
Bottle p;
Bottle response;
bool ok=false;
bool rec=false;
p.fromString(s.c_str());
printf("Bottle: %s\n", p.toString().c_str());
switch(p.get(0).asVocab()) {
case VOCAB_HELP:
printf("\n\n");
printf("Available commands:\n");
printf("-------------------\n\n");
printf("IOpenLoop:\ntype [%s] and one of the following:\n", Vocab::decode(VOCAB_IOPENLOOP).c_str());
printf(" [set] [%s] <int> <float>\n",
Vocab::decode(VOCAB_OUTPUT).c_str());
printf(" [get] [%s] <int>\n",
Vocab::decode(VOCAB_OUTPUT).c_str());
printf(" [get] [%s]\n\n",
Vocab::decode(VOCAB_OUTPUTS).c_str());
printf("IControlMode:\ntype [%s] and one of the following:\n", Vocab::decode(VOCAB_ICONTROLMODE).c_str());
printf(" [set] [%s]|[%s]|[%s]|[%s]|[%s]|[%s]|[%s]|[%s][%s]|[%s]\n",
Vocab::decode(VOCAB_CM_POSITION).c_str(),
Vocab::decode(VOCAB_CM_POSITION_DIRECT).c_str(),
Vocab::decode(VOCAB_CM_VELOCITY).c_str(),
Vocab::decode(VOCAB_CM_MIXED).c_str(),
Vocab::decode(VOCAB_CM_TORQUE).c_str(),
Vocab::decode(VOCAB_CM_OPENLOOP).c_str(),
Vocab::decode(VOCAB_CM_IDLE).c_str(),
Vocab::decode(VOCAB_CM_FORCE_IDLE).c_str(),
Vocab::decode(VOCAB_CM_IMPEDANCE_POS).c_str(),
Vocab::decode(VOCAB_CM_IMPEDANCE_VEL).c_str());
printf(" [get] [%s] <int>\n\n",
Vocab::decode(VOCAB_CM_CONTROL_MODE).c_str());
printf("ITorqueControl:\ntype [%s] and one of the following:\n", Vocab::decode(VOCAB_TORQUE).c_str());
printf(" [get] [%s] <int> to read the measured torque for a single axis\n", Vocab::decode(VOCAB_TRQ).c_str());
printf(" [get] [%s] to read the measured torque for all axes\n", Vocab::decode(VOCAB_TRQS).c_str());
printf(" [set] [%s] <int> <float> to set the reference torque for a single axis\n", Vocab::decode(VOCAB_REF).c_str());
printf(" [set] [%s] <float list> to set the reference torque for all axes\n", Vocab::decode(VOCAB_REFS).c_str());
printf(" [get] [%s] <int> to read the reference torque for a single axis\n", Vocab::decode(VOCAB_REF).c_str());
printf(" [get] [%s] to read the reference torque for all axes\n\n", Vocab::decode(VOCAB_REFS).c_str());
printf("IImpedanceControl:\ntype [%s] and one of the following:\n", Vocab::decode(VOCAB_IMPEDANCE).c_str());
printf(" [set] [%s] <int> <float> <float> \n",
Vocab::decode(VOCAB_IMP_PARAM).c_str());
printf(" [set] [%s] <int> <float>\n\n",
Vocab::decode(VOCAB_IMP_OFFSET).c_str());
printf(" [get] [%s] <int>\n",
Vocab::decode(VOCAB_IMP_PARAM).c_str());
printf(" [get] [%s] <int>\n\n",
Vocab::decode(VOCAB_IMP_OFFSET).c_str());
printf("IInteractionMode:\ntype [%s] and one of the following:\n", Vocab::decode(VOCAB_INTERFACE_INTERACTION_MODE).c_str());
printf(" [set] [%s]|[%s] <int>\n",
Vocab::decode(VOCAB_IM_STIFF).c_str(),
Vocab::decode(VOCAB_IM_COMPLIANT).c_str());
printf(" [get] [%s] <int>\n",
Vocab::decode(VOCAB_INTERACTION_MODE).c_str());
printf(" [get] [%s] \n\n",
Vocab::decode(VOCAB_INTERACTION_MODES).c_str());
printf("Standard Interfaces:\n");
printf("type [get] and one of the following:\n");
printf(" [%s] to read the number of controlled axes\n", Vocab::decode(VOCAB_AXES).c_str());
printf(" [%s] to read the encoder value for all axes\n", Vocab::decode(VOCAB_ENCODERS).c_str());
printf(" [%s] to read the PID values for all axes\n", Vocab::decode(VOCAB_PIDS).c_str());
printf(" [%s] <int> to read the PID values for a single axis\n", Vocab::decode(VOCAB_PID).c_str());
printf(" [%s] <int> to read the limit values for a single axis\n", Vocab::decode(VOCAB_LIMITS).c_str());
printf(" [%s] to read the PID error for all axes\n", Vocab::decode(VOCAB_ERRS).c_str());
printf(" [%s] to read the PID output for all axes\n", Vocab::decode(VOCAB_OUTPUTS).c_str());
printf(" [%s] to read the reference position for all axes\n", Vocab::decode(VOCAB_REFERENCES).c_str());
printf(" [%s] <int> to read the reference position for a single axis\n", Vocab::decode(VOCAB_REFERENCE).c_str());
printf(" [%s] to read the reference speed for all axes\n", Vocab::decode(VOCAB_REF_SPEEDS).c_str());
printf(" [%s] <int> to read the reference speed for a single axis\n", Vocab::decode(VOCAB_REF_SPEED).c_str());
printf(" [%s] to read the reference acceleration for all axes\n", Vocab::decode(VOCAB_REF_ACCELERATIONS).c_str());
printf(" [%s] <int> to read the reference acceleration for a single axis\n", Vocab::decode(VOCAB_REF_ACCELERATION).c_str());
printf(" [%s] to read the current consumption for all axes\n", Vocab::decode(VOCAB_AMP_CURRENTS).c_str());
printf("\n");
printf("type [set] and one of the following:\n");
printf(" [%s] <int> <double> to move a single axis\n", Vocab::decode(VOCAB_POSITION_MOVE).c_str());
printf(" [%s] <int> <double> to accelerate a single axis to a given speed\n", Vocab::decode(VOCAB_VELOCITY_MOVE).c_str());
printf(" [%s] <int> <double> to set the reference speed for a single axis\n", Vocab::decode(VOCAB_REF_SPEED).c_str());
printf(" [%s] <int> <double> to set the reference acceleration for a single axis\n", Vocab::decode(VOCAB_REF_ACCELERATION).c_str());
printf(" [%s] <list> to move multiple axes\n", Vocab::decode(VOCAB_POSITION_MOVES).c_str());
printf(" [%s] <list> to accelerate multiple axes to a given speed\n", Vocab::decode(VOCAB_VELOCITY_MOVES).c_str());
printf(" [%s] <list> to set the reference speed for all axes\n", Vocab::decode(VOCAB_REF_SPEEDS).c_str());
printf(" [%s] <list> to set the reference acceleration for all axes\n", Vocab::decode(VOCAB_REF_ACCELERATIONS).c_str());
printf(" [%s] <int> to stop a single axis\n", Vocab::decode(VOCAB_STOP).c_str());
printf(" [%s] <int> to stop all axes\n", Vocab::decode(VOCAB_STOPS).c_str());
printf(" [%s] <int> <list> to set the PID values for a single axis\n", Vocab::decode(VOCAB_PID).c_str());
printf(" [%s] <int> <list> to set the limits for a single axis\n", Vocab::decode(VOCAB_LIMITS).c_str());
printf(" [%s] <int> to disable the PID control for a single axis\n", Vocab::decode(VOCAB_DISABLE).c_str());
printf(" [%s] <int> to enable the PID control for a single axis\n", Vocab::decode(VOCAB_ENABLE).c_str());
printf(" [%s] <int> <double> to set the encoder value for a single axis\n", Vocab::decode(VOCAB_ENCODER).c_str());
printf(" [%s] <list> to set the encoder value for all axes\n", Vocab::decode(VOCAB_ENCODERS).c_str());
printf("\n");
printf("NOTES: - A list is a sequence of numbers in parenthesis, e.g. (10 2 1 10)\n");
printf(" - Pids are expressed as a list of 7 numbers, type get pid <int> to see an example\n");
printf("\n");
break;
case VOCAB_QUIT:
goto ApplicationCleanQuit;
break;
case VOCAB_ICONTROLMODE:
{
handleControlModeMsg(iMode2, p, response, &rec, &ok);
printf("%s\n", response.toString().c_str());
break;
}
case VOCAB_IMPEDANCE:
{
handleImpedanceMsg(iimp, p, response, &rec, &ok);
printf("%s\n", response.toString().c_str());
break;
}
case VOCAB_TORQUE:
{
handleTorqueMsg(itorque, p, response, &rec, &ok);
printf("%s\n", response.toString().c_str());
break;
}
case VOCAB_INTERFACE_INTERACTION_MODE:
{
handleInteractionModeMsg(iInteract, p, response, &rec, &ok);
printf("%s\n", response.toString().c_str());
break;
}
case VOCAB_GET:
switch(p.get(1).asVocab()) {
case VOCAB_AXES: {
int nj = 0;
enc->getAxes(&nj);
printf ("%s: %d\n", Vocab::decode(VOCAB_AXES).c_str(), nj);
}
break;
case VOCAB_ENCODERS: {
enc->getEncoders(tmp);
printf ("%s: (", Vocab::decode(VOCAB_ENCODERS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_PID: {
Pid pd;
int j = p.get(2).asInt();
pid->getPid(j, &pd);
printf("%s: ", Vocab::decode(VOCAB_PID).c_str());
printf("kp %.2f ", pd.kp);
printf("kd %.2f ", pd.kd);
printf("ki %.2f ", pd.ki);
printf("maxi %.2f ", pd.max_int);
printf("maxo %.2f ", pd.max_output);
printf("off %.2f ", pd.offset);
printf("scale %.2f ", pd.scale);
printf("\n");
}
break;
case VOCAB_PIDS: {
Pid *p = new Pid[jnts];
ok = pid->getPids(p);
Bottle& b = response.addList();
int i;
for (i = 0; i < jnts; i++)
{
Bottle& c = b.addList();
c.addDouble(p[i].kp);
c.addDouble(p[i].kd);
c.addDouble(p[i].ki);
c.addDouble(p[i].max_int);
c.addDouble(p[i].max_output);
c.addDouble(p[i].offset);
c.addDouble(p[i].scale);
}
printf("%s\n", b.toString().c_str());
delete[] p;
}
break;
case VOCAB_LIMITS: {
double min, max;
int j = p.get(2).asInt();
lim->getLimits(j, &min, &max);
printf("%s: ", Vocab::decode(VOCAB_LIMITS).c_str());
printf("limits: (%.2f %.2f)\n", min, max);
}
break;
case VOCAB_ERRS: {
pid->getErrors(tmp);
printf ("%s: (", Vocab::decode(VOCAB_ERRS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_OUTPUTS: {
iopenloop->getOutputs(tmp);
printf ("%s: (", Vocab::decode(VOCAB_OUTPUTS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_OUTPUT: {
int j = p.get(2).asInt();
double v;
iopenloop->getOutput(j, &v);
printf("%s: ", Vocab::decode(VOCAB_OUTPUT).c_str());
printf("%.2f ", v);
printf("\n");
}
break;
case VOCAB_REFERENCE: {
double ref_pos;
int j = p.get(2).asInt();
pid->getReference(j,&ref_pos);
printf ("%s: (", Vocab::decode(VOCAB_REFERENCE).c_str());
printf ("%.2f ", ref_pos);
printf (")\n");
}
break;
case VOCAB_REFERENCES: {
pid->getReferences(tmp);
printf ("%s: (", Vocab::decode(VOCAB_REFERENCES).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_REF_SPEEDS: {
pos->getRefSpeeds(tmp);
printf ("%s: (", Vocab::decode(VOCAB_REF_SPEEDS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_REF_SPEED: {
double ref_speed;
int j = p.get(2).asInt();
pos->getRefSpeed(j,&ref_speed);
printf ("%s: (", Vocab::decode(VOCAB_REF_SPEED).c_str());
printf ("%.2f ", ref_speed);
printf (")\n");
}
break;
case VOCAB_REF_ACCELERATION: {
double ref_acc;
int j = p.get(2).asInt();
pos->getRefAcceleration(j,&ref_acc);
printf ("%s: (", Vocab::decode(VOCAB_REF_ACCELERATION).c_str());
printf ("%.2f ", ref_acc);
printf (")\n");
}
break;
case VOCAB_REF_ACCELERATIONS: {
pos->getRefAccelerations(tmp);
printf ("%s: (", Vocab::decode(VOCAB_REF_ACCELERATIONS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_AMP_CURRENTS: {
amp->getCurrents(tmp);
printf ("%s: (", Vocab::decode(VOCAB_AMP_CURRENTS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
}
break;
case VOCAB_SET:
switch(p.get(1).asVocab()) {
case VOCAB_POSITION_MOVE: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: moving %d to %.2f\n", Vocab::decode(VOCAB_POSITION_MOVE).c_str(), j, ref);
pos->positionMove(j, ref);
}
break;
case VOCAB_VELOCITY_MOVE: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: accelerating %d to %.2f\n", Vocab::decode(VOCAB_VELOCITY_MOVE).c_str(), j, ref);
vel->velocityMove(j, ref);
}
break;
case VOCAB_REF_SPEED: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: setting speed for %d to %.2f\n", Vocab::decode(VOCAB_REF_SPEED).c_str(), j, ref);
pos->setRefSpeed(j, ref);
}
break;
case VOCAB_REF_ACCELERATION: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: setting acceleration for %d to %.2f\n", Vocab::decode(VOCAB_REF_ACCELERATION).c_str(), j, ref);
pos->setRefAcceleration(j, ref);
}
break;
case VOCAB_POSITION_MOVES: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: moving all joints\n", Vocab::decode(VOCAB_POSITION_MOVES).c_str());
pos->positionMove(tmp);
}
break;
case VOCAB_VELOCITY_MOVES: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: moving all joints\n", Vocab::decode(VOCAB_VELOCITY_MOVES).c_str());
vel->velocityMove(tmp);
}
break;
case VOCAB_REF_SPEEDS: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: setting speed for all joints\n", Vocab::decode(VOCAB_REF_SPEEDS).c_str());
pos->setRefSpeeds(tmp);
}
break;
case VOCAB_REF_ACCELERATIONS: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: setting acceleration for all joints\n", Vocab::decode(VOCAB_REF_ACCELERATIONS).c_str());
pos->setRefAccelerations(tmp);
}
break;
case VOCAB_STOP: {
int j = p.get(2).asInt();
printf("%s: stopping axis %d\n", Vocab::decode(VOCAB_STOP).c_str(), j);
pos->stop(j);
}
break;
case VOCAB_STOPS: {
printf("%s: stopping all axes\n", Vocab::decode(VOCAB_STOPS).c_str());
pos->stop();
}
break;
case VOCAB_ENCODER: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: setting the encoder value for %d to %.2f\n", Vocab::decode(VOCAB_ENCODER).c_str(), j, ref);
enc->setEncoder(j, ref);
}
break;
case VOCAB_ENCODERS: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: setting the encoder value for all joints\n", Vocab::decode(VOCAB_ENCODERS).c_str());
enc->setEncoders(tmp);
}
break;
case VOCAB_PID: {
Pid pd;
int j = p.get(2).asInt();
Bottle *l = p.get(3).asList();
if (l==0)
{
printf("Check you specify a 7 elements list, e.g. set pid 0 (2000 20 1 300 300 0 0)\n");
}
else
{
int elems=l->size();
if (elems>=3)
{
pd.kp = l->get(0).asDouble();
pd.kd = l->get(1).asDouble();
pd.ki = l->get(2).asDouble();
if (elems>=7)
{
pd.max_int = l->get(3).asDouble();
pd.max_output = l->get(4).asDouble();
pd.offset = l->get(5).asDouble();
pd.scale = l->get(6).asDouble();
}
printf("%s: setting PID values for axis %d\n", Vocab::decode(VOCAB_PID).c_str(), j);
pid->setPid(j, pd);
}
else
{
printf("Error, check you specify at least 7 elements, e.g. set pid 0 (2000 20 1 300 300 0 0)\n");
}
}
}
break;
case VOCAB_DISABLE: {
int j = p.get(2).asInt();
printf("%s: disabling control for axis %d\n", Vocab::decode(VOCAB_DISABLE).c_str(), j);
pid->disablePid(j);
amp->disableAmp(j);
}
break;
case VOCAB_ENABLE: {
int j = p.get(2).asInt();
printf("%s: enabling control for axis %d\n", Vocab::decode(VOCAB_ENABLE).c_str(), j);
amp->enableAmp(j);
pid->enablePid(j);
}
break;
case VOCAB_LIMITS: {
int j = p.get(2).asInt();
printf("%s: setting limits for axis %d\n", Vocab::decode(VOCAB_LIMITS).c_str(), j);
Bottle *l = p.get(3).asList();
lim->setLimits(j, l->get(0).asDouble(), l->get(1).asDouble());
}
break;
case VOCAB_OUTPUT: {
int j=p.get(2).asInt();
double v=p.get(3).asDouble();
iopenloop->setRefOutput(j,v);
printf("%s: setting output for axis %d to %f\n", Vocab::decode(VOCAB_OUTPUT).c_str(), j, v);
}
break;
}
break;
} /* switch get(0) */
} /* while () */
ApplicationCleanQuit:
dd.close();
delete[] tmp;
Network::fini();
return 0;
}
void partMover::sequence_cycle(GtkButton *button,partMover* currentPart)
{
IPositionControl *ipos = currentPart->pos;
IEncoders *iiencs = currentPart->iencs;
IAmplifierControl *iamp = currentPart->amp;
IPidControl *ipid = currentPart->pid;
int *SEQUENCE_TMP = currentPart->SEQUENCE;
double *TIMING_TMP = currentPart->TIMING;
double **STORED_POS_TMP = currentPart->STORED_POS;
double **STORED_VEL_TMP = currentPart->STORED_VEL;
int *INV_SEQUENCE_TMP = currentPart->INV_SEQUENCE;
GtkWidget **sliderAry = currentPart->sliderArray;
GtkWidget **sliderVelAry = currentPart->sliderVelArray;
GtkWidget *tree_view = currentPart->treeview;
guint32* timeout_seqeunce_rate_tmp = currentPart->timeout_seqeunce_rate;
guint* timeout_seqeunce_id_tmp = currentPart->timeout_seqeunce_id;
int *SEQUENCE_ITERATOR_TMP = currentPart->SEQUENCE_ITERATOR;
int j, k;
*timeout_seqeunce_rate_tmp = (unsigned int) (TIMING_TMP[0]*1000);
int NUMBER_OF_JOINTS;
ipos->getAxes(&NUMBER_OF_JOINTS);
for (j = 0; j < NUMBER_OF_STORED; j++)
INV_SEQUENCE_TMP[j] = -1;
for (j = 0; j < NUMBER_OF_STORED; j++)
{
if (SEQUENCE_TMP[j]>-1 && (SEQUENCE_TMP[j]<NUMBER_OF_STORED))
{
INV_SEQUENCE_TMP[SEQUENCE_TMP[j]] = j;
}
}
//if possible execute the first movement
//SEQUENCE_ITERATOR = 0;
if (INV_SEQUENCE_TMP[0]!=-1 && TIMING_TMP[0] >0 )
{
*timeout_seqeunce_id_tmp = gtk_timeout_add(*timeout_seqeunce_rate_tmp, (GtkFunction)sequence_iterator, currentPart);
ipos->setRefSpeeds(STORED_VEL_TMP[INV_SEQUENCE_TMP[0]]);
ipos->positionMove(STORED_POS_TMP[INV_SEQUENCE_TMP[0]]);
for (k =0; k < NUMBER_OF_JOINTS; k++)
{
gtk_range_set_value ((GtkRange *) (sliderAry[k]), STORED_POS_TMP[INV_SEQUENCE_TMP[0]][k]);
gtk_range_set_value ((GtkRange *) (sliderVelAry[k]), STORED_VEL_TMP[INV_SEQUENCE_TMP[0]][k]);
}
//point the SEQUENCE ITERATOR to the next movement
*SEQUENCE_ITERATOR_TMP = 1;
//deactivate all buttons
for (k =0; k < NUMBER_OF_JOINTS; k++)
{
gtk_widget_set_sensitive(sliderVelAry[k], false);
gtk_widget_set_sensitive(sliderAry[k], false);
}
//fprintf(stderr, "Disabling bottons\n");
if (currentPart->button1 != NULL)
gtk_widget_set_sensitive(currentPart->button1, false);
if (currentPart->button2 != NULL)
gtk_widget_set_sensitive(currentPart->button2, false);
if (currentPart->button3 != NULL)
gtk_widget_set_sensitive(currentPart->button3, false);
if (currentPart->button4 != NULL)
gtk_widget_set_sensitive(currentPart->button4, false);
if (currentPart->button5 != NULL)
gtk_widget_set_sensitive(currentPart->button5, false);
if (currentPart->button7 != NULL)
gtk_widget_set_sensitive(currentPart->button7, false);
if (currentPart->button8 != NULL)
gtk_widget_set_sensitive(currentPart->button8, false);
}
return;
}
void partMover::fixed_time_move(const double *cmdPositions, double cmdTime, partMover* currentPart)
{
IPositionControl *ipos = currentPart->pos;
IEncoders *iiencs = currentPart->iencs;
IAmplifierControl *iamp = currentPart->amp;
IPidControl *ipid = currentPart->pid;
ITorqueControl *itrq= currentPart->trq;
int *SEQUENCE_TMP = currentPart->SEQUENCE;
double *TIMING_TMP = currentPart->TIMING;
double **STORED_POS_TMP = currentPart->STORED_POS;
double **STORED_VEL_TMP = currentPart->STORED_VEL;
GtkWidget **sliderAry = currentPart->sliderArray;
GtkWidget **sliderVelAry = currentPart->sliderVelArray;
int NUM_JOINTS;
ipos->getAxes(&NUM_JOINTS);
double *cmdVelocities = new double[NUM_JOINTS];
double *startPositions = new double[NUM_JOINTS];
while (!iiencs->getEncoders(startPositions))
Time::delay(0.001);
//fprintf(stderr, "getEncoders is returning false\n");
//fprintf(stderr, "Getting the following values for the encoders");
//for(int k=0; k<NUM_JOINTS; k++)
// fprintf(stderr, "%.1f ", startPositions[k]);
//fprintf(stderr, "\n");
int k;
for(k=0; k<NUM_JOINTS; k++)
{
cmdVelocities[k] = 0;
if (fabs(startPositions[k] - cmdPositions[k]) > 0.01)
cmdVelocities[k] = fabs(startPositions[k] - cmdPositions[k])/cmdTime;
else
cmdVelocities[k] = 1.0;
}
//fprintf(stderr, "ExplorerThread-> Start pos:\n");
//for(int j=0; j < NUM_JOINTS; j++)
// fprintf(stderr, "%.2lf\t", startPositions[j]);
//fprintf(stderr, "\n");
//fprintf(stderr, "ExplorerThread-> Moving arm to:\n");
//for(int j=0; j < NUM_JOINTS; j++)
// fprintf(stderr, "%.2lf\t", cmdPositions[j]);
//fprintf(stderr, "\n");
//fprintf(stderr, "ExplorerThread-> with velocity:\n");
//for(int ii=0; ii < NUM_JOINTS; ii++)
// fprintf(stderr, "%.2lf\t", cmdVelocities[ii]);
//fprintf(stderr, "\n");
ipos->setRefSpeeds(cmdVelocities);
ipos->positionMove(cmdPositions);
currentPart->sequence_port_stamp.update();
currentPart->sequence_port.setEnvelope(currentPart->sequence_port_stamp);
Vector v(NUM_JOINTS,cmdPositions);
currentPart->sequence_port.write(v);
delete cmdVelocities;
delete startPositions;
return;
}
int main(int argc, char *argv[])
{
// just list the devices if no argument given
if (argc <= 2) {
printf("You can call %s like this:\n", argv[0]);
printf(" %s --robot ROBOTNAME --OPTION VALUE ...\n", argv[0]);
printf("For example:\n");
printf(" %s --robot icub --part any --remote /controlboard\n", argv[0]);
printf("Here are devices listed for your system:\n");
printf("%s", Drivers::factory().toString().c_str());
return 0;
}
// get command line options
Property options;
options.fromCommand(argc, argv);
if (!options.check("robot") || !options.check("part")) {
printf("Missing either --robot or --part options\n");
return 0;
}
Network yarp;
Time::turboBoost();
char name[1024];
Value& v = options.find("robot");
Value& part = options.find("part");
Value *val;
if (!options.check("device", val)) {
options.put("device", "remote_controlboard");
}
if (!options.check("local", val)) {
sprintf(name, "/%s/%s/client", v.asString().c_str(), part.asString().c_str());
options.put("local", name);
}
if (!options.check("remote", val)) {
sprintf(name, "/%s/%s", v.asString().c_str(), part.asString().c_str());
options.put("remote", name);
}
fprintf(stderr, "%s", options.toString().c_str());
// create a device
PolyDriver dd(options);
if (!dd.isValid()) {
printf("Device not available. Here are the known devices:\n");
printf("%s", Drivers::factory().toString().c_str());
return 1;
}
IPositionControl *pos;
IVelocityControl *vel;
IEncoders *enc;
IPidControl *pid;
IAmplifierControl *amp;
IControlLimits *lim;
bool ok;
ok = dd.view(pos);
ok &= dd.view(vel);
ok &= dd.view(enc);
ok &= dd.view(pid);
ok &= dd.view(amp);
ok &= dd.view(lim);
if (!ok) {
printf("Problems acquiring interfaces\n");
return 1;
}
int jnts = 0;
pos->getAxes(&jnts);
printf("Working with %d axes\n", jnts);
double *tmp = new double[jnts];
assert (tmp != NULL);
printf("Device active...\n");
while (dd.isValid()) {
char s[1024];
printf("-> ");
char c = 0;
int i = 0;
while (c != '\n') {
c = (char)fgetc(stdin);
s[i++] = c;
}
s[i-1] = s[i] = 0;
Bottle p;
p.fromString(s);
printf("Bottle: %s\n", p.toString().c_str());
switch(p.get(0).asVocab()) {
case VOCAB_HELP:
printf("\n\n");
printf("Available commands:\n\n");
printf("type [get] and one of the following:\n");
printf("[%s] to read the number of controlled axes\n", Vocab::decode(VOCAB_AXES).c_str());
printf("[%s] to read the encoder value for all axes\n", Vocab::decode(VOCAB_ENCODERS).c_str());
printf("[%s] <int> to read the PID values for a single axis\n", Vocab::decode(VOCAB_PID).c_str());
printf("[%s] <int> to read the limit values for a single axis\n", Vocab::decode(VOCAB_LIMITS).c_str());
printf("[%s] to read the PID error for all axes\n", Vocab::decode(VOCAB_ERRS).c_str());
printf("[%s] to read the PID output for all axes\n", Vocab::decode(VOCAB_OUTPUTS).c_str());
printf("[%s] to read the reference position for all axes\n", Vocab::decode(VOCAB_REFERENCES).c_str());
printf("[%s] to read the reference speed for all axes\n", Vocab::decode(VOCAB_REF_SPEEDS).c_str());
printf("[%s] to read the reference acceleration for all axes\n", Vocab::decode(VOCAB_REF_ACCELERATIONS).c_str());
printf("[%s] to read the current consumption for all axes\n", Vocab::decode(VOCAB_AMP_CURRENTS).c_str());
printf("\n");
printf("type [set] and one of the following:\n");
printf("[%s] <int> <double> to move a single axis\n", Vocab::decode(VOCAB_POSITION_MOVE).c_str());
printf("[%s] <int> <double> to accelerate a single axis to a given speed\n", Vocab::decode(VOCAB_VELOCITY_MOVE).c_str());
printf("[%s] <int> <double> to set the reference speed for a single axis\n", Vocab::decode(VOCAB_REF_SPEED).c_str());
printf("[%s] <int> <double> to set the reference acceleration for a single axis\n", Vocab::decode(VOCAB_REF_ACCELERATION).c_str());
printf("[%s] <list> to move multiple axes\n", Vocab::decode(VOCAB_POSITION_MOVES).c_str());
printf("[%s] <list> to accelerate multiple axes to a given speed\n", Vocab::decode(VOCAB_VELOCITY_MOVES).c_str());
printf("[%s] <list> to set the reference speed for all axes\n", Vocab::decode(VOCAB_REF_SPEEDS).c_str());
printf("[%s] <list> to set the reference acceleration for all axes\n", Vocab::decode(VOCAB_REF_ACCELERATIONS).c_str());
printf("[%s] <int> to stop a single axis\n", Vocab::decode(VOCAB_STOP).c_str());
printf("[%s] <int> to stop all axes\n", Vocab::decode(VOCAB_STOPS).c_str());
printf("[%s] <int> <list> to set the PID values for a single axis\n", Vocab::decode(VOCAB_PID).c_str());
printf("[%s] <int> <list> to set the limits for a single axis\n", Vocab::decode(VOCAB_LIMITS).c_str());
printf("[%s] <int> to disable the PID control for a single axis\n", Vocab::decode(VOCAB_DISABLE).c_str());
printf("[%s] <int> to enable the PID control for a single axis\n", Vocab::decode(VOCAB_ENABLE).c_str());
printf("[%s] <int> <double> to set the encoder value for a single axis\n", Vocab::decode(VOCAB_ENCODER).c_str());
printf("[%s] <list> to set the encoder value for all axes\n", Vocab::decode(VOCAB_ENCODERS).c_str());
printf("\n");
break;
case VOCAB_QUIT:
goto ApplicationCleanQuit;
break;
case VOCAB_GET:
switch(p.get(1).asVocab()) {
case VOCAB_AXES: {
int nj = 0;
enc->getAxes(&nj);
printf ("%s: %d\n", Vocab::decode(VOCAB_AXES).c_str(), nj);
}
break;
case VOCAB_ENCODERS: {
enc->getEncoders(tmp);
printf ("%s: (", Vocab::decode(VOCAB_ENCODERS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_PID: {
Pid pd;
int j = p.get(2).asInt();
pid->getPid(j, &pd);
printf("%s: ", Vocab::decode(VOCAB_PID).c_str());
printf("kp %.2f ", pd.kp);
printf("kd %.2f ", pd.kd);
printf("ki %.2f ", pd.ki);
printf("maxi %.2f ", pd.max_int);
printf("maxo %.2f ", pd.max_output);
printf("off %.2f ", pd.offset);
printf("scale %.2f ", pd.scale);
printf("\n");
}
break;
case VOCAB_LIMITS: {
double min, max;
int j = p.get(2).asInt();
lim->getLimits(j, &min, &max);
printf("%s: ", Vocab::decode(VOCAB_LIMITS).c_str());
printf("limits: (%.2f %.2f)\n", min, max);
}
break;
case VOCAB_ERRS: {
pid->getErrorLimits(tmp);
printf ("%s: (", Vocab::decode(VOCAB_ERRS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_OUTPUTS: {
pid->getErrors(tmp);
printf ("%s: (", Vocab::decode(VOCAB_OUTPUTS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_REFERENCES: {
pid->getReferences(tmp);
printf ("%s: (", Vocab::decode(VOCAB_REFERENCES).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_REF_SPEEDS: {
pos->getRefSpeeds(tmp);
printf ("%s: (", Vocab::decode(VOCAB_REF_SPEEDS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_REF_ACCELERATIONS: {
pos->getRefAccelerations(tmp);
printf ("%s: (", Vocab::decode(VOCAB_REF_ACCELERATIONS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
case VOCAB_AMP_CURRENTS: {
amp->getCurrents(tmp);
printf ("%s: (", Vocab::decode(VOCAB_AMP_CURRENTS).c_str());
for(i = 0; i < jnts; i++)
printf ("%.2f ", tmp[i]);
printf (")\n");
}
break;
}
break;
case VOCAB_SET:
switch(p.get(1).asVocab()) {
case VOCAB_POSITION_MOVE: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: moving %d to %.2f\n", Vocab::decode(VOCAB_POSITION_MOVE).c_str(), j, ref);
pos->positionMove(j, ref);
}
break;
case VOCAB_VELOCITY_MOVE: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: accelerating %d to %.2f\n", Vocab::decode(VOCAB_VELOCITY_MOVE).c_str(), j, ref);
vel->velocityMove(j, ref);
}
break;
case VOCAB_REF_SPEED: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: setting speed for %d to %.2f\n", Vocab::decode(VOCAB_REF_SPEED).c_str(), j, ref);
pos->setRefSpeed(j, ref);
}
break;
case VOCAB_REF_ACCELERATION: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: setting acceleration for %d to %.2f\n", Vocab::decode(VOCAB_REF_ACCELERATION).c_str(), j, ref);
pos->setRefAcceleration(j, ref);
}
break;
case VOCAB_POSITION_MOVES: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: moving all joints\n", Vocab::decode(VOCAB_POSITION_MOVES).c_str());
pos->positionMove(tmp);
}
break;
case VOCAB_VELOCITY_MOVES: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: moving all joints\n", Vocab::decode(VOCAB_VELOCITY_MOVES).c_str());
vel->velocityMove(tmp);
}
break;
case VOCAB_REF_SPEEDS: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: setting speed for all joints\n", Vocab::decode(VOCAB_REF_SPEEDS).c_str());
pos->setRefSpeeds(tmp);
}
break;
case VOCAB_REF_ACCELERATIONS: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: setting acceleration for all joints\n", Vocab::decode(VOCAB_REF_ACCELERATIONS).c_str());
pos->setRefAccelerations(tmp);
}
break;
case VOCAB_STOP: {
int j = p.get(2).asInt();
printf("%s: stopping axis %d\n", Vocab::decode(VOCAB_STOP).c_str());
pos->stop(j);
}
break;
case VOCAB_STOPS: {
printf("%s: stopping all axes %d\n", Vocab::decode(VOCAB_STOPS).c_str());
pos->stop();
}
break;
case VOCAB_ENCODER: {
int j = p.get(2).asInt();
double ref = p.get(3).asDouble();
printf("%s: setting the encoder value for %d to %.2f\n", Vocab::decode(VOCAB_ENCODER).c_str(), j, ref);
enc->setEncoder(j, ref);
}
break;
case VOCAB_ENCODERS: {
Bottle *l = p.get(2).asList();
for (i = 0; i < jnts; i++) {
tmp[i] = l->get(i).asDouble();
}
printf("%s: setting the encoder value for all joints\n", Vocab::decode(VOCAB_ENCODERS).c_str());
enc->setEncoders(tmp);
}
break;
case VOCAB_PID: {
Pid pd;
int j = p.get(2).asInt();
Bottle *l = p.get(3).asList();
pd.kp = l->get(0).asDouble();
pd.kd = l->get(1).asDouble();
pd.ki = l->get(2).asDouble();
pd.max_int = l->get(3).asDouble();
pd.max_output = l->get(4).asDouble();
pd.offset = l->get(5).asDouble();
pd.scale = l->get(6).asDouble();
printf("%s: setting PID values for axis %d\n", Vocab::decode(VOCAB_PID).c_str(), j);
pid->setPid(j, pd);
}
break;
case VOCAB_DISABLE: {
int j = p.get(2).asInt();
printf("%s: disabling control for axis %d\n", Vocab::decode(VOCAB_DISABLE).c_str(), j);
pid->disablePid(j);
amp->disableAmp(j);
}
break;
case VOCAB_ENABLE: {
int j = p.get(2).asInt();
printf("%s: enabling control for axis %d\n", Vocab::decode(VOCAB_ENABLE).c_str(), j);
amp->enableAmp(j);
pid->enablePid(j);
}
break;
case VOCAB_LIMITS: {
int j = p.get(2).asInt();
printf("%s: setting limits for axis %d\n", Vocab::decode(VOCAB_LIMITS).c_str(), j);
Bottle *l = p.get(3).asList();
lim->setLimits(j, l->get(0).asDouble(), l->get(1).asDouble());
}
break;
}
break;
} /* switch get(0) */
} /* while () */
ApplicationCleanQuit:
dd.close();
delete[] tmp;
return 0;
}