void KisAutoBrushTest::testMaskGeneration()
{
KisCircleMaskGenerator* circle = new KisCircleMaskGenerator(10, 1.0, 1.0, 1.0, 2, false);
KisBrushSP a = new KisAutoBrush(circle, 0.0, 0.0);
const KoColorSpace * cs = KoColorSpaceRegistry::instance()->rgb8();
KisPaintInformation info(QPointF(100.0, 100.0), 0.5);
// check masking an existing paint device
KisFixedPaintDeviceSP fdev = new KisFixedPaintDevice(cs);
fdev->setRect(QRect(0, 0, 100, 100));
fdev->initialize();
cs->setOpacity(fdev->data(), OPACITY_OPAQUE_U8, 100 * 100);
QPoint errpoint;
QImage result(QString(FILES_DATA_DIR) + QDir::separator() + "result_autobrush_1.png");
QImage image = fdev->convertToQImage(0);
if (!TestUtil::compareQImages(errpoint, image, result)) {
image.save("kis_autobrush_test_1.png");
QFAIL(QString("Failed to create identical image, first different pixel: %1,%2 \n").arg(errpoint.x()).arg(errpoint.y()).toLatin1());
}
// Check creating a mask dab with a single color
fdev = new KisFixedPaintDevice(cs);
a->mask(fdev, KoColor(Qt::black, cs), KisDabShape(), info);
result = QImage(QString(FILES_DATA_DIR) + QDir::separator() + "result_autobrush_3.png");
image = fdev->convertToQImage(0);
if (!TestUtil::compareQImages(errpoint, image, result)) {
image.save("kis_autobrush_test_3.png");
QFAIL(QString("Failed to create identical image, first different pixel: %1,%2 \n").arg(errpoint.x()).arg(errpoint.y()).toLatin1());
}
// Check creating a mask dab with a color taken from a paint device
KoColor red(Qt::red, cs);
cs->setOpacity(red.data(), quint8(128), 1);
KisPaintDeviceSP dev = new KisPaintDevice(cs);
dev->fill(0, 0, 100, 100, red.data());
fdev = new KisFixedPaintDevice(cs);
a->mask(fdev, dev, KisDabShape(), info);
result = QImage(QString(FILES_DATA_DIR) + QDir::separator() + "result_autobrush_4.png");
image = fdev->convertToQImage(0);
if (!TestUtil::compareQImages(errpoint, image, result)) {
image.save("kis_autobrush_test_4.png");
QFAIL(QString("Failed to create identical image, first different pixel: %1,%2 \n").arg(errpoint.x()).arg(errpoint.y()).toLatin1());
}
}
KisHairyPaintOp::KisHairyPaintOp(const KisBrushBasedPaintOpSettings *settings, KisPainter * painter, KisNodeSP node, KisImageSP image)
: KisPaintOp(painter)
{
Q_UNUSED(image)
Q_ASSERT(settings);
m_dev = node ? node->paintDevice() : 0;
KisBrushOption brushOption;
brushOption.readOptionSetting(settings);
KisBrushSP brush = brushOption.brush();
KisFixedPaintDeviceSP dab = cachedDab(painter->device()->compositionSourceColorSpace());
if (brush->brushType() == IMAGE || brush->brushType() == PIPE_IMAGE) {
dab = brush->paintDevice(source()->colorSpace(), 1.0, 0.0, KisPaintInformation());
}
else {
brush->mask(dab, painter->paintColor(), 1.0, 1.0, 0.0, KisPaintInformation());
}
m_brush.fromDabWithDensity(dab, settings->getDouble(HAIRY_BRISTLE_DENSITY) * 0.01);
m_brush.setInkColor(painter->paintColor());
loadSettings(settings);
m_brush.setProperties(&m_properties);
m_rotationOption.readOptionSetting(settings);
m_opacityOption.readOptionSetting(settings);
m_sizeOption.readOptionSetting(settings);
m_rotationOption.resetAllSensors();
m_opacityOption.resetAllSensors();
m_sizeOption.resetAllSensors();
}
void KisAutoBrushTest::testClone()
{
const KoColorSpace * cs = KoColorSpaceRegistry::instance()->rgb8();
KisCircleMaskGenerator* circle = new KisCircleMaskGenerator(10, 0.7, 0.85, 0.5, 2, true);
KisBrushSP brush = new KisAutoBrush(circle, 0.5, 0.0);
KisPaintInformation info(QPointF(100.0, 100.0), 0.5);
KisFixedPaintDeviceSP fdev1 = new KisFixedPaintDevice(cs);
brush->mask(fdev1, KoColor(Qt::black, cs), KisDabShape(0.8, 1.0, 8.0), info);
QImage res1 = fdev1->convertToQImage(0);
KisBrushSP clone = brush->clone();
KisFixedPaintDeviceSP fdev2 = new KisFixedPaintDevice(cs);
clone->mask(fdev2, KoColor(Qt::black, cs), KisDabShape(0.8, 1.0, 8.0), info);
QImage res2 = fdev2->convertToQImage(0);
QCOMPARE(res1, res2);
}
void KisBrushOp::paintAt(const KisPaintInformation& info)
{
if (!painter()->device()) return;
KisBrushSP brush = m_brush;
Q_ASSERT(brush);
if (!brush) return;
KisPaintInformation adjustedInfo = settings->m_optionsWidget->m_sizeOption->apply(info);
if (!brush->canPaintFor(adjustedInfo))
return;
KisPaintDeviceSP device = painter()->device();
double pScale = KisPaintOp::scaleForPressure(adjustedInfo.pressure()); // TODO: why is there scale and pScale that seems to contains the same things ?
QPointF hotSpot = brush->hotSpot(pScale, pScale);
QPointF pt = info.pos() - hotSpot;
// Split the coordinates into integer plus fractional parts. The integer
// is where the dab will be positioned and the fractional part determines
// the sub-pixel positioning.
qint32 x;
double xFraction;
qint32 y;
double yFraction;
splitCoordinate(pt.x(), &x, &xFraction);
splitCoordinate(pt.y(), &y, &yFraction);
quint8 origOpacity = settings->m_optionsWidget->m_opacityOption->apply(painter(), info.pressure());
KoColor origColor = settings->m_optionsWidget->m_darkenOption->apply(painter(), info.pressure());
double scale = KisPaintOp::scaleForPressure(adjustedInfo.pressure());
KisFixedPaintDeviceSP dab = cachedDab(device->colorSpace());
if (brush->brushType() == IMAGE || brush->brushType() == PIPE_IMAGE) {
dab = brush->image(device->colorSpace(), scale, 0.0, adjustedInfo, xFraction, yFraction);
} else {
KoColor color = painter()->paintColor();
color.convertTo(dab->colorSpace());
brush->mask(dab, color, scale, scale, 0.0, info, xFraction, yFraction);
}
painter()->bltFixed(QPoint(x, y), dab, dab->bounds());
painter()->setOpacity(origOpacity);
painter()->setPaintColor(origColor);
}
void KisFilterOp::paintAt(const KisPaintInformation& info)
{
if (!painter()) {
return;
}
KisFilterSP filter = settings->filter();
if (!filter) {
return;
}
if (!source()) {
return;
}
KisBrushSP brush = m_brush;;
if (!brush) return;
KisPaintInformation adjustedInfo = settings->m_optionsWidget->m_sizeOption->apply(info);
if (! brush->canPaintFor(adjustedInfo))
return;
double pScale = KisPaintOp::scaleForPressure(adjustedInfo.pressure()); // TODO: why is there scale and pScale that seems to contains the same things ?
QPointF hotSpot = brush->hotSpot(pScale, pScale);
QPointF pt = info.pos() - hotSpot;
// Split the coordinates into integer plus fractional parts. The integer
// is where the dab will be positioned and the fractional part determines
// the sub-pixel positioning.
qint32 x;
double xFraction;
qint32 y;
double yFraction;
splitCoordinate(pt.x(), &x, &xFraction);
splitCoordinate(pt.y(), &y, &yFraction);
double scale = KisPaintOp::scaleForPressure(adjustedInfo.pressure());
qint32 maskWidth = brush->maskWidth(scale, 0.0);
qint32 maskHeight = brush->maskHeight(scale, 0.0);
// Filter the paint device
filter->process(KisConstProcessingInformation(source(), QPoint(x, y)),
KisProcessingInformation(m_tmpDevice, QPoint(0, 0)),
QSize(maskWidth, maskHeight),
settings->filterConfig(), 0);
// Apply the mask on the paint device (filter before mask because edge pixels may be important)
KisFixedPaintDeviceSP fixedDab = new KisFixedPaintDevice(m_tmpDevice->colorSpace());
fixedDab->setRect(m_tmpDevice->extent());
fixedDab->initialize();
m_tmpDevice->readBytes(fixedDab->data(), fixedDab->bounds());
brush->mask(fixedDab, scale, scale, 0.0, info, xFraction, yFraction);
m_tmpDevice->writeBytes(fixedDab->data(), fixedDab->bounds());
if (!settings->ignoreAlpha()) {
KisHLineIteratorPixel itTmpDev = m_tmpDevice->createHLineIterator(0, 0, maskWidth);
KisHLineIteratorPixel itSrc = source()->createHLineIterator(x, y, maskWidth);
const KoColorSpace* cs = m_tmpDevice->colorSpace();
for (int y = 0; y < maskHeight; ++y) {
while (!itTmpDev.isDone()) {
quint8 alphaTmpDev = cs->alpha(itTmpDev.rawData());
quint8 alphaSrc = cs->alpha(itSrc.rawData());
cs->setAlpha(itTmpDev.rawData(), qMin(alphaTmpDev, alphaSrc), 1);
++itTmpDev;
++itSrc;
}
itTmpDev.nextRow();
itSrc.nextRow();
}
}
// Blit the paint device onto the layer
QRect dabRect = QRect(0, 0, maskWidth, maskHeight);
QRect dstRect = QRect(x, y, dabRect.width(), dabRect.height());
if (painter()->bounds().isValid()) {
dstRect &= painter()->bounds();
}
if (dstRect.isNull() || dstRect.isEmpty() || !dstRect.isValid()) return;
qint32 sx = dstRect.x() - x;
qint32 sy = dstRect.y() - y;
qint32 sw = dstRect.width();
qint32 sh = dstRect.height();
painter()->bitBlt(dstRect.x(), dstRect.y(), m_tmpDevice, sx, sy, sw, sh);
}
void KisDuplicateOp::paintAt(const KisPaintInformation& info)
{
if (!painter()) return;
if (!m_duplicateStartIsSet) {
m_duplicateStartIsSet = true;
m_duplicateStart = info.pos();
}
bool heal = settings->healing();
if (!source()) return;
KisBrushSP brush = m_brush;
if (!brush) return;
if (! brush->canPaintFor(info))
return;
double scale = KisPaintOp::scaleForPressure(info.pressure());
QPointF hotSpot = brush->hotSpot(scale, scale);
QPointF pt = info.pos() - hotSpot;
// Split the coordinates into integer plus fractional parts. The integer
// is where the dab will be positioned and the fractional part determines
// the sub-pixel positioning.
qint32 x;
double xFraction;
qint32 y;
double yFraction;
splitCoordinate(pt.x(), &x, &xFraction);
splitCoordinate(pt.y(), &y, &yFraction);
xFraction = yFraction = 0.0;
QPointF srcPointF = pt - settings->offset();
QPoint srcPoint = QPoint(x - static_cast<qint32>(settings->offset().x()),
y - static_cast<qint32>(settings->offset().y()));
qint32 sw = brush->maskWidth(scale, 0.0);
qint32 sh = brush->maskHeight(scale, 0.0);
if (srcPoint.x() < 0)
srcPoint.setX(0);
if (srcPoint.y() < 0)
srcPoint.setY(0);
if (!(m_srcdev && !(*m_srcdev->colorSpace() == *source()->colorSpace()))) {
m_srcdev = new KisPaintDevice(source()->colorSpace());
}
Q_CHECK_PTR(m_srcdev);
// Perspective correction ?
KisPainter copyPainter(m_srcdev);
KisImageSP image = settings->m_image;
if (settings->perspectiveCorrection() && image && image->perspectiveGrid()->countSubGrids() == 1) {
Matrix3qreal startM = Matrix3qreal::Identity();
Matrix3qreal endM = Matrix3qreal::Identity();
// First look for the grid corresponding to the start point
KisSubPerspectiveGrid* subGridStart = *image->perspectiveGrid()->begin();
QRect r = QRect(0, 0, image->width(), image->height());
#if 1
if (subGridStart) {
startM = KisPerspectiveMath::computeMatrixTransfoFromPerspective(r, *subGridStart->topLeft(), *subGridStart->topRight(), *subGridStart->bottomLeft(), *subGridStart->bottomRight());
}
#endif
#if 1
// Second look for the grid corresponding to the end point
KisSubPerspectiveGrid* subGridEnd = *image->perspectiveGrid()->begin();
if (subGridEnd) {
endM = KisPerspectiveMath::computeMatrixTransfoToPerspective(*subGridEnd->topLeft(), *subGridEnd->topRight(), *subGridEnd->bottomLeft(), *subGridEnd->bottomRight(), r);
}
#endif
// Compute the translation in the perspective transformation space:
QPointF positionStartPaintingT = KisPerspectiveMath::matProd(endM, QPointF(m_duplicateStart));
QPointF duplicateStartPositionT = KisPerspectiveMath::matProd(endM, QPointF(m_duplicateStart) - QPointF(settings->offset()));
QPointF translat = duplicateStartPositionT - positionStartPaintingT;
KisRectIteratorPixel dstIt = m_srcdev->createRectIterator(0, 0, sw, sh);
KisRandomSubAccessorPixel srcAcc = source()->createRandomSubAccessor();
//Action
while (!dstIt.isDone()) {
if (dstIt.isSelected()) {
QPointF p = KisPerspectiveMath::matProd(startM, KisPerspectiveMath::matProd(endM, QPointF(dstIt.x() + x, dstIt.y() + y)) + translat);
srcAcc.moveTo(p);
srcAcc.sampledOldRawData(dstIt.rawData());
}
++dstIt;
}
} else {
// Or, copy the source data on the temporary device:
copyPainter.setCompositeOp(COMPOSITE_COPY);
copyPainter.bitBlt(0, 0, source(), srcPoint.x(), srcPoint.y(), sw, sh);
copyPainter.end();
}
// heal ?
if (heal) {
quint16 dataDevice[4];
quint16 dataSrcDev[4];
double* matrix = new double[ 3 * sw * sh ];
// First divide
const KoColorSpace* deviceCs = source()->colorSpace();
KisHLineConstIteratorPixel deviceIt = source()->createHLineConstIterator(x, y, sw);
KisHLineIteratorPixel srcDevIt = m_srcdev->createHLineIterator(0, 0, sw);
double* matrixIt = &matrix[0];
for (int j = 0; j < sh; j++) {
for (int i = 0; !srcDevIt.isDone(); i++) {
deviceCs->toLabA16(deviceIt.rawData(), (quint8*)dataDevice, 1);
deviceCs->toLabA16(srcDevIt.rawData(), (quint8*)dataSrcDev, 1);
// Division
for (int k = 0; k < 3; k++) {
matrixIt[k] = dataDevice[k] / (double)qMax((int)dataSrcDev [k], 1);
}
++deviceIt;
++srcDevIt;
matrixIt += 3;
}
deviceIt.nextRow();
srcDevIt.nextRow();
}
// Minimize energy
{
int iter = 0;
double err;
double* solution = new double [ 3 * sw * sh ];
do {
err = minimizeEnergy(&matrix[0], &solution[0], sw, sh);
memcpy(&matrix[0], &solution[0], sw * sh * 3 * sizeof(double));
iter++;
} while (err < 0.00001 && iter < 100);
delete [] solution;
}
// Finaly multiply
deviceIt = source()->createHLineIterator(x, y, sw);
srcDevIt = m_srcdev->createHLineIterator(0, 0, sw);
matrixIt = &matrix[0];
for (int j = 0; j < sh; j++) {
for (int i = 0; !srcDevIt.isDone(); i++) {
deviceCs->toLabA16(deviceIt.rawData(), (quint8*)dataDevice, 1);
deviceCs->toLabA16(srcDevIt.rawData(), (quint8*)dataSrcDev, 1);
// Multiplication
for (int k = 0; k < 3; k++) {
dataSrcDev[k] = (int)CLAMP(matrixIt[k] * qMax((int) dataSrcDev[k], 1), 0, 65535);
}
deviceCs->fromLabA16((quint8*)dataSrcDev, srcDevIt.rawData(), 1);
++deviceIt;
++srcDevIt;
matrixIt += 3;
}
deviceIt.nextRow();
srcDevIt.nextRow();
}
delete [] matrix;
}
KisFixedPaintDeviceSP fixedDab = new KisFixedPaintDevice(m_srcdev->colorSpace());
fixedDab->setRect(QRect(0, 0, sw, sh));
fixedDab->initialize();
m_srcdev->readBytes(fixedDab->data(), fixedDab->bounds());
brush->mask(fixedDab, scale, scale, 0.0, info, xFraction, yFraction);
m_srcdev->writeBytes(fixedDab->data(), fixedDab->bounds());
QRect dabRect = QRect(0, 0, brush->maskWidth(scale, 0.0), brush->maskHeight(scale, 0.0));
QRect dstRect = QRect(x, y, dabRect.width(), dabRect.height());
if (painter()->bounds().isValid()) {
dstRect &= painter()->bounds();
}
if (dstRect.isNull() || dstRect.isEmpty() || !dstRect.isValid()) return;
qint32 sx = dstRect.x() - x;
qint32 sy = dstRect.y() - y;
sw = dstRect.width();
sh = dstRect.height();
painter()->bitBlt(dstRect.x(), dstRect.y(), m_srcdev, sx, sy, sw, sh);
}
void KisSmudgeOp::paintAt(const KisPaintInformation& info)
{
if (!painter()->device()) return;
KisBrushSP brush = m_brush;
Q_ASSERT(brush);
if (!brush) return;
KisPaintInformation adjustedInfo = settings->m_optionsWidget->m_sizeOption->apply(info);
if (! brush->canPaintFor(adjustedInfo))
return;
KisPaintDeviceSP device = painter()->device();
double pScale = KisPaintOp::scaleForPressure(adjustedInfo.pressure());
QPointF hotSpot = brush->hotSpot(pScale, pScale);
QPointF pt = info.pos() - hotSpot;
// Split the coordinates into integer plus fractional parts. The integer
// is where the dab will be positioned and the fractional part determines
// the sub-pixel positioning.
qint32 x;
double xFraction;
qint32 y;
double yFraction;
splitCoordinate(pt.x(), &x, &xFraction);
splitCoordinate(pt.y(), &y, &yFraction);
KisFixedPaintDeviceSP dab = 0;
double scale = KisPaintOp::scaleForPressure(adjustedInfo.pressure());
QRect dabRect = QRect(0, 0, brush->maskWidth(scale, 0.0), brush->maskHeight(scale, 0.0));
QRect dstRect = QRect(x, y, dabRect.width(), dabRect.height());
if (dstRect.isNull() || dstRect.isEmpty() || !dstRect.isValid()) return;
if (brush->brushType() == IMAGE || brush->brushType() == PIPE_IMAGE) {
dab = brush->image(device->colorSpace(), pScale, 0.0, adjustedInfo, xFraction, yFraction);
dab->convertTo(KoColorSpaceRegistry::instance()->alpha8());
} else {
dab = cachedDab();
KoColor color = painter()->paintColor();
dab->convertTo(KoColorSpaceRegistry::instance()->alpha8());
brush->mask(dab, color, scale, pScale, 0.0, info, xFraction, yFraction);
}
qint32 sw = dab->bounds().width();
qint32 sh = dab->bounds().height();
/* To smudge, one does the following:
* at first, initialize a temporary paint device with a copy of the original (dab-sized piece, really).
* all other times:
reduce the transparency of the temporary paint device so as to let it mix gradually
* combine the temp device with the piece the brush currently is 'painting', according to a mix (opacity)
note that in the first step, this does the actual copying of the data
* this combination is then composited upon the actual image
TODO: what happened exactly in 1.6 (and should happen now) when the dab resizes halfway due to pressure?
*/
int opacity = OPACITY_OPAQUE;
if (!m_firstRun) {
opacity = settings->m_optionsWidget->m_rateOption->apply( opacity, sw, sh, m_srcdev, info.pressure() );
KisRectIterator it = m_srcdev->createRectIterator(0, 0, sw, sh);
KoColorSpace* cs = m_srcdev->colorSpace();
while(!it.isDone()) {
cs->setAlpha(it.rawData(), (cs->alpha(it.rawData()) * opacity) / OPACITY_OPAQUE, 1);
++it;
}
opacity = OPACITY_OPAQUE - opacity;
} else {
m_firstRun = false;
}
KisPainter copyPainter(m_srcdev);
copyPainter.setOpacity(opacity);
copyPainter.bitBlt(0, 0, device, pt.x(), pt.y(), sw, sh);
copyPainter.end();
m_target = new KisPaintDevice(device->colorSpace());
// Looks hacky, but we lost bltMask, or the ability to easily convert alpha8 paintdev to selection?
KisSelectionSP dabAsSelection = new KisSelection();
copyPainter.begin(dabAsSelection);
copyPainter.setOpacity(OPACITY_OPAQUE);
copyPainter.setCompositeOp(COMPOSITE_COPY);
copyPainter.bltFixed(0, 0, dab, 0, 0, sw, sh);
copyPainter.end();
copyPainter.begin(m_target);
copyPainter.setCompositeOp(COMPOSITE_OVER);
copyPainter.setSelection(dabAsSelection);
copyPainter.bitBlt(0, 0, m_srcdev, 0, 0, sw, sh);
copyPainter.end();
qint32 sx = dstRect.x() - x;
qint32 sy = dstRect.y() - y;
sw = dstRect.width();
sh = dstRect.height();
painter()->bitBlt(dstRect.x(), dstRect.y(), m_target, sx, sy, sw, sh);
}
qreal KisFilterOp::paintAt(const KisPaintInformation& info)
{
if (!painter()) {
return 1.0;
}
if (!m_filter) {
return 1.0;
}
if (!source()) {
return 1.0;
}
KisBrushSP brush = m_brush;;
if (!brush) return 1.0;
if (! brush->canPaintFor(info))
return 1.0;
qreal scale = KisPaintOp::scaleForPressure(m_sizeOption.apply(info));
if ((scale * brush->width()) <= 0.01 || (scale * brush->height()) <= 0.01) return spacing(scale);
setCurrentScale(scale);
QPointF hotSpot = brush->hotSpot(scale, scale);
QPointF pt = info.pos() - hotSpot;
// Split the coordinates into integer plus fractional parts. The integer
// is where the dab will be positioned and the fractional part determines
// the sub-pixel positioning.
qint32 x;
qreal xFraction;
qint32 y;
qreal yFraction;
splitCoordinate(pt.x(), &x, &xFraction);
splitCoordinate(pt.y(), &y, &yFraction);
qint32 maskWidth = brush->maskWidth(scale, 0.0);
qint32 maskHeight = brush->maskHeight(scale, 0.0);
// Filter the paint device
m_filter->process(KisConstProcessingInformation(source(), QPoint(x, y)),
KisProcessingInformation(m_tmpDevice, QPoint(0, 0)),
QSize(maskWidth, maskHeight),
m_filterConfiguration, 0);
// Apply the mask on the paint device (filter before mask because edge pixels may be important)
KisFixedPaintDeviceSP fixedDab = new KisFixedPaintDevice(m_tmpDevice->colorSpace());
fixedDab->setRect(m_tmpDevice->extent());
fixedDab->initialize();
m_tmpDevice->readBytes(fixedDab->data(), fixedDab->bounds());
brush->mask(fixedDab, scale, scale, 0.0, info, xFraction, yFraction);
m_tmpDevice->writeBytes(fixedDab->data(), fixedDab->bounds());
if (!m_ignoreAlpha) {
KisHLineIteratorPixel itTmpDev = m_tmpDevice->createHLineIterator(0, 0, maskWidth);
KisHLineIteratorPixel itSrc = source()->createHLineIterator(x, y, maskWidth);
const KoColorSpace* cs = m_tmpDevice->colorSpace();
for (int y = 0; y < maskHeight; ++y) {
while (!itTmpDev.isDone()) {
quint8 alphaTmpDev = cs->opacityU8(itTmpDev.rawData());
quint8 alphaSrc = cs->opacityU8(itSrc.rawData());
cs->setOpacity(itTmpDev.rawData(), qMin(alphaTmpDev, alphaSrc), 1);
++itTmpDev;
++itSrc;
}
itTmpDev.nextRow();
itSrc.nextRow();
}
}
// Blit the paint device onto the layer
QRect dabRect = QRect(0, 0, maskWidth, maskHeight);
QRect dstRect = QRect(x, y, dabRect.width(), dabRect.height());
if (dstRect.isNull() || dstRect.isEmpty() || !dstRect.isValid()) return 1.0;
qint32 sx = dstRect.x() - x;
qint32 sy = dstRect.y() - y;
qint32 sw = dstRect.width();
qint32 sh = dstRect.height();
painter()->bitBlt(dstRect.x(), dstRect.y(), m_tmpDevice, sx, sy, sw, sh);
return spacing(scale);
}
